knee type milling machines - bfwbfwindia.com/media/products/knee-tye milling machines.pdfe-mail:...
TRANSCRIPT
BHARAT FRITZ WERNER
Knee Type Milling Machines
High rigidity,power and accuracy!
Knee Type Milling MachinesStandard Models: HF1, HF1E, VF1, VF1E, UVF1, UF1 HF2, HF2E, VF2, VF2E, UF2 HF3.5, HF3.5E, VF3.5, VF3.5E, UF3.5
BFW conventional milling machines are used in several countries such as Bahrain, India, Kenya, Nigeria, Oman, Russia, Saudi Arabia, UAE, and Zimbabwe.
A good number of these machines are relied upon for production by industry leaders such as Amtek, Bajaj Motors, Grasim Industries, Honda, Jindal Steel & Power, L&T, Mahindra & Mahindra, Maruti Udyog, Tata Motors, ThyssenKrupp, and Toyota.
BHEL, BEML, Central Scientific Institute of Research, Field Gun Factories, Gun Carriage Factories, HAL, ISRO, Ordnance Factories, and Vikram Sarabhai Space Centre are some prominent public sector users of these machines.
A useful vocational training tool, these machines are extensively used by the Indian Institutes of Technology, National Institutes of Technology, Directorate of Vocational and Educational Training, various ITIs, and many engineering colleges.
The worldwide population of BFW conventional milling machines is estimated to be 20,000. Built on German design perfected to suit Indian conditions, BFW conventional milling machines are the most preferred in their class as per data maintained at the Indian Machine Tool Manufacturers' Association.
Users have claimed success in milling prismatic components of steel, brass, aluminium, cast iron, and even wood with these machines; the hardness being up to 27 HRC and the depth of cut being up to 6 mm. Keyway milling on shafts, in-bore slotting, notch milling, rack cutting, spur/ helical gear cutting, etc., are some of the extraordinary usages tried by customers.
PowerfulPrecise Rugged
Column-mounted electrical cabinet
3-lever control for spindle speed selection
3-lever control for feed selection
Built-in coolant tank in machine base
Differential thread clamping system for knee for higher clamping force
Vertical milling head swivelled by 45° on either side of the vertical plane
Motorised Overarm (Optional)MOA is supplied with vertical milling head for Size 2
and Size 3.5 machines. A manual quill stroke of70 mm is available on the milling head. The MOA
comes with an independent drive motor of3 kW (4 HP) power. The spindle is provided with
12 speeds in the range 45-2,000 rpm andISO 40 taper. Since the MOA itself is used as
overarm for mounting the arbor support bracket, no overarm is needed.
Chip collection and coolant
diversion with large tray below
the table
Rigid overarm makes overarm brace superfluous
Milling head moves away quickly from the work position for side parking
Rigid StructureThe rigid structure enables smooth, vibration-free machining. The rigid spindle housing, cross ribbed box type column structure, and the closed box-type knee design facilitate optimum chip removal and surface finish.
Work SpindleOptimum spacing of precision taper roller bearings enables vibration-free cutting. The bearing pre-loading is adjusted through a common nut.
CoolantAn electric pump mounted at the rear of the machine base ensures copious flow of coolant to the work zone. The coolant is discharged into the built-in coolant tank in the machine base.
LubricationCental lubrication for guide-ways and lead-screws, splash lubrication for speed and feed gears.
Guides The table, the cross-slide, and the knee, slide over dovetail guide-ways, which are amply dimensioned to withstand machining load. The guide-ways are protected constantly from the ingress of swarf and coolant.
Feed and TraversePower-operated feed in longitudinal and cross directionsfor standard Size 1 machine, rapid feed in longitudinal direction optional. Power operated feed and rapid traverse in longitudinal, cross, and vertical directions for Size 2 and Size 3.5 models.
Table DriveLead-screw with two nuts for backlash-free setting
Feed selection by sliding gear drive
Reversal of movement directionthrough motor reversal
Dead accurate stoppage through brake clutch
Change-over and rapid traverse feed through multi-disc clutch
Large tray on the base- plate for chips and coolant
Most of the BFW vertical and horizontal machines are also available with
programmable logic controller.
Attachments and Accessories for Increased Flexibility
Universal Dividing HeadFor simple, differential and compound dividing. Can be used for spiral milling on universal milling machines. Spindle axis can be tilted on the vertical plane
Indexing HeadMounted both horizontally and vertically, extremely useful for direct indexing up to 24 divisions, each of 15°
Self-centering ViceFor milling radial grooves and slots, and drilling radial holes in round components. Can be used both vertically and horizontally
Machine ViceMechanical/ hydraulic with solid/ swivel base, jaw widths 150 mm - 250 mm, jaw opening up to 300 mm
Circular TableFor rotary movement, offered in 250 mm and 400 mm diameters
Clamping KitConsisting of T, coupling, flange nuts, step clamps, and blocks; facilitates clamping without costly fixtures
Vertical Milling HeadSwivelled and clamped 45°on either side. The quill with the cutter spindle moves manually along its axis up or down for clamping at the desired position. 4- position turret stop and rapid quill movement facility is provided as optional feature on the vertical milling head for Size 1 and Size 2 models
Digital Read Out SystemOn all or X and Y axes, 0.005 mm resolution, helps in visualising table movement positions. Features offered include FPS-CGS conversion, 0- setting of the component, bolt-hole circle programming, and geometric/ trigonometric functions
Micro-boring and facing head milling arbors, angle plate and sine table collet adaptor with collets, etc.
Gear Cutting with Universal Diving Head, Milling, In-bore Slotting Keyway Cutting
Right Angle
Taper Keyway Milling, Head, Slotting and Keyway Cutting on Clutch Body
Hexagonal Milling with Indexing
Some Extraordinary Applications
Machine Dimensions
MEASURE UNIT
HORIZONTAL VERTICAL UNIVERSAL
HF1HF1E
HF2HF2E
HF3.5HF3.5E
VF1VF1E
VF2VF2E
VF3.5VF3.5E UF1 UF2 UF3.5
A1 1,960 2,450 3,600 1,960 2,450 3,600 1,975 2,730 3,410
A2 500 500 700 500 500 700 500 500 700
A3 940 1,155 1,800 940 1,155 1,800 1,045 1,280 1,681
A4* 1,105 1,350 1,630 1,105 1,350 1,630 1,090 1,350 1,630
A5*Min 245 335 180 245 335 180 265 335 380
Max 805 1,135 1,380 805 1,135 1,380 825 1,135 1,380
B1 1,480 1,730 2,120 - - - 1,480 1,730 2,120
B2 1,407 1,657 2,047 1,691 1,890 2,345 1,407 1,657 2,047
B3 1,100 1,295 1,565 1,167 1,367 1,626 1,100 1,295 1,565
B4Min -10 90 70 57 162 131 -10 50 70
Max 380 490 520 447 562 581 330 450 470
B5 115 145 185 - - - 115 145 185
B6 - - - 70 70 100 - - -
C1 1,591 1,900 2,550 1,591 1,900 2,550 1,591 1,900 2,550
C2 1,050 1,060 1,500 1,050 1,060 1,500 1,050 1,060 1,500
C3 230 315 355 230 315 355 230 315 315
C4 465 465 589 - - - 465 465 589
C5 43 43 55 - - - 43 43 55
C6 - - - 250 300 360 - - -
C7Min 40.5 27.5 21.5 45-5 27.5 21.5 40.5 17.5 54
Max 290.5 257.5 341.5 290.5 257.5 341.5 290.5 247.5 374
Version FeatureVF Only vertical spindle
HF Horizontal spindle, optionallyvertical milling head attachment
UF Horizontal spindle, table swivel, optionallyvertical milling head attachment
Packing dimensions and gross weight (approx)Length Width Height Weight*
Size1 1.7 m 2 m 2 m 2,500 kgSize 2 2.3 m 2.1 m 2 .1 m 3,000 kgSize 3 3 m 2.6 m 2.7 m 4,500 kg
* Dimensions givenfor left end of table
clamping area
All dimensions in mm
*Weight of accessories extra
HF/ UF
VF
TECHNICAL DATA UNIT
HORIZONTAL VERTICAL UNIVERSAL
HF1HF1E
HF2HF2E
HF3.5HF3.5E
VF1VF1E
VF2VF2E
VF3.5VF3.5E UVF 1 UF1 UF2 UF3.5
Table
Overall size (L x W) mm x mm 1,245 x 230 1,555 x 315 2,055 x 355 1,245 x 230 1,555 x 315 2,055 x 355 1,245 x 230 1,175 x 230 1,555 x 315 2,055 x 315
Clamping area mm x mm 1,000 x 230 1,350 x 315 1,630 x 355 1,000 x 230 1,350 x 315 1,630 x 355 1,000 x 230 1,000 x 230 1,350 x 315 1,630 x 315
T-slot/ width/ CD nos./ mm/ mm 3/ 14/ 45 3/ 14/ 63 3/ 18/ 100 3/ 14/ 45 3/ 14/ 63 3/ 18/ 100 3/ 14/ 45 3/ 14/ 45 3/ 14/ 63 3/ 18/ 100
Swivel range of table to both sides deg NA NA NA NA NA NA 45 45 45 45
Longitudinal movement
Automatic mm 560 800 1,200 560 800 1,200 560 560 800 1,000
Manual mm 590 830 1,230 590 830 1,230 590 590 830 1,030
Transverse movement
Automatic mm 250 230 320 250 230 320 250 250 230 320
Manual mm 270 260 350 270 260 350 270 270 260 350
Vertical movement
Automatic mm NA 400 450 NA 400 450 NA NA 400 400
Manual mm 390 420 470 390 420 470 390 340 420 420
Spindle
Quill stroke, manual mm NA NA NA 70 70 100 70 NA NA NA
Milling spindle front bearing Ø mm 70 85 95 70 85 95 70 70 85 95
Spindle taper ISO 40 40 50 40 40 50 40 40 40 50
Vertical milling headswivelling on both sides deg *** *** *** 45 45 45 45 *** *** ***
Speed range rpm 45 - 2,000 45 - 2,000 35.5 - 1,800 45 - 2,000 45 - 2,000 35.5 - 1,800 45 - 2,000 45 - 2,000 45 - 2,000 35.5 - 1,800
Nos./ progression 12/ 1.4 12/ 1.4 18/ 1.25 12/ 1.4 12/ 1.4 18/ 1.25 12/ 1.4 12/ 1.4 12/ 1.4 18/ 1.25
Feed
Nos. of feed Nos. 18 18 21 18 18 21 18 18 18 21
Feed range (progression 1.25)
Longitudinal mm/min 16 - 800 16 - 800 16 - 1,600 16 - 800 16 - 800 16 - 1,600 16 - 800 16 - 800 16 - 800 16 - 1,600
Transverse mm/min 16 - 800 16 - 800 16 - 1,600 16 - 800 16 - 800 16 - 1,600 16 - 800 16 - 800 16 - 800 16 - 1,600
Vertical mm/min NA 4 - 200 4 - 400 NA 4 - 200 4 - 400 NA NA 4 - 200 6.3 - 630
Rapid traverse
Longitudinal mm/min **2,500 4,000 4,000 **2,500 4,000 4,000 2,500** NA 2,500 2,000
Transverse mm/min NA 4,000 4,000 NA 4,000 4,000 NA NA 2,500 2,000
Vertical mm/min NA 1,000 1,000 NA 1,000 1,000 NA NA 630 800
Milling spindle motor kW 3 5.5 11 3 5.5 11 3 3 5.5 11
Feed motor kW 0.75 1.5 *1.3/ 2.2 0.75 1.5 *1.3/ 2.2 0.75 0.75 1.5 *1.3/ 2.2
Maximum safe load on table kg 170 400 600 170 400 600 170 170 400 400
Weight nett (approx.) kg 1,700 2,200 3,650 1,800 2,250 3,760 1,800 1,700 2,300 3,850
Dual speed motor Standard for models HF1E and VF1E, optional for models HF1 and VF1
Standard colour: Apple green, IS-281 (RAL-6011)
Optional attachment
***
***
BELGAUM : Block 4, Plot 737, Khanapur Road, Near Railway Gate 3, Udyambag, Belgaum 590008.CHENNAI : 4G, Century Plaza, 560/562, Mount Road, Chennai 600018. Ph: (044) 24349299, 24343367. Fax: (044) 42132353. E-mail: [email protected] COIMBATORE : H1, Damodar Centre, 1050, Avinashi Road, Coimbatore 641018. Ph: (0422) 2248046, 2241694. E-mail: [email protected] : Flat No 204, 1-11-229, Ramaveda Sirisampada Apt, Near Shyamalal Bldgs, Begumpet, Hyderabad 500016. Ph: (040) 27762035. E-mail: [email protected] KOLKATA : D - 4/4, Gillander House, 8, Netaji Subhash Road, Kolkata 700001. Ph: (033) 40102140–42, 22623387. Fax: (033) 40056911. E-mail: [email protected] : 206, Runwal Commercial Complex, LBS Marg, Mulund West, Mumbai 400080. Ph: (022) 25653362/ 58. Fax: (022) 25653392. E-mail: [email protected] DELHI : 510, Mahatta Towers, B – Block, Community Center, Janakpuri, New Delhi 110058. Ph: (011) 25522210. Fax: (011) 45629699. E-mail: [email protected] : BFW House, 124 A, H Block, MIDC, Pimpri, Pune 411018. Ph: (020) 32524638. E-mail: [email protected]
thRAJKOT : 85-86, 4 Floor, Samruddhi Bhavan, Opp. Bombay Garage petrol pump, Gondal Road, Rajkot 360002. E-mail: [email protected]
Representatives at Ahmedabad, Aurangabad, Chandigarh and Jamshedpur.
We are continuously working on the development of our products, the information contained in this brochure is subject to modification.
While all efforts have been made to ensure that this publication carries correct information, the reader is advised to consult an authorised representative ofBharat Fritz Werner to ascertain latest details. The information on this publication is subject to change without notice.
Off Tumkur Road, Bangalore 560022, India.
Ph 80-39821134/ 39821286/ 39821100/ 28395745
Fax: 80-28394816, e-mail: [email protected] URL: www.bfwindia.com
Feedback Apps: http://www.bfwindia.com/bfw-feedback/feedback_form.php
Dealer/ Representative
BFW@kanaka/ Milling 0715
Technical Specifications