kit – mtr thermoregulation - home | rdz
TRANSCRIPT
We have been working in an ideal climate for thirty years.
A climate that has brought us to a position of
leadership in Italy in the field of radiant heating and
cooling. RDZ was the first company to receive the
management system quality certification (today
UNI EN ISO 9001:2008).
RDZ has been a quality-oriented company since
its very beginning, using the finest materials,
developing new solutions, constantly providing
excellent service. And also by creating a positive
climate in the company to promote the exchange
of ideas and stimulate cooperation for constant
improvement.
1
INDEX
Thermoregulation Kit
Kit Control-Clima Duplex
Kit PF Duplex
Kit VJ 0-10 Duplex
Kit PF Simplex
MTR Modules
MTR Control-Clima
MTR PF
MTR VJ 0-10
Product summaries
Page
24812162022263034
Kit and MTR
2
Floor heating system manifolds Water supply for bathroom radiators
Pre-wired electrical system
Low temperature circulation pump and thermoregulation
Air trap for complete system de-aeration
Example of Thermoregulation Kit
Standard components:
• Control manifolds • RDZ Clima pipe connectors • 3-way bronze mixing valve• Electronic or thermostatic adjustment• 3-speed circulation pump• IP 43 rated electrical wiring
• Electronic safety thermostat• Air trap • Thermostat-predisposed radiator manifolds• Adjustable cabinet and cover • Plaster protection• Pre-varnished locking cover
1
3
2
5
4
1 2 3
4 5
3
Thermoregulation Kit
Residential contractors often have diffi culty fi nding a suitable
placement for the distribution, regulation and control equipment
which is necessary for the proper functioning of the systems.
RDZ thermoregulation kit occupies only slightly more space than
normal distribution manifolds and act as complete substations
which contain all necessary regulation equipment. Duplex version
functions with wall-mounted boilers that are equipped with integrated
circulation pumps and make it possible to connect high-temperature
heating elements. This version is typically applied in bathrooms
which are often equipped with both underfl oor heating and with
additional thermal units, such as radiators. RDZ kit is available with
various thermoregulation systems: from simple and reliable set-point
thermostats, to electronically-regulated “hot/cold” climate control
with temperature compensation and humidity control.
12345
Complete pre-assembled unit.
Compact solution.
Electrical wiring.
Easy installation.
Reduced installation costs.
4
Kit and MTR
The pre-assembled Kit Control-Clima Duplex is used to
manage combined radiator and radiating panel systems.
It is ideal for fl oor heating and cooling in both fl ats and
houses.
The thermoregulation of the low temperatures is managed
by a P.I. action electronic climate control unit based on
microprocessor technology which is able to manage
underfl oor systems all year round.
The control unit is equipped with a keyboard and LCD
display which can be used to set and check the parameters.
Switching between winter and summer modes can be
performed manually.
Upon request, Kit Control-Clima can be equipped with a
room temperature sensor (RT optional) or a combined room
temperature/humidity sensor (optional RTU). With RTU
sensor, the control unit can activate the dehumidifi cation
system (RNW). This Kit is equipped with a pre-installed
and pre-wired electric panel, thereby making for quick and
simple installation with no additional costs.
High temperature circuits are provided with distribution
manifolds which are equipped with on-off valves and are
predisposed for the application of electro-thermal heads.
Kit Control-Clima DuplexSuitable for connection to boilers with integrated pumps.
> Adjustment by means of a three-way mixing valve > Three-point electric motor> Control-Clima climatic control unit> 3-speed circulation pump> IP 43 rated electrical wiring
> Predisposition for temperature and humidity sensor> Predisposition for dehumidifi cation control> Electronic safety thermostat> Air trap > Thermostat-predisposed radiator manifolds
Kit Control-Clima Duplex Characteristics
5
Kit and MTR
DEHUMIDIFIER
BOILER
CHILLER
1
2
3
4
5
6
7
8
9
10
11
12
Boiler (with pump)
Chiller (with pump)
Hydraulic compensator
3-way deviation valves
Thermoregulation Kit Control–Clima Duplex
External sensor
Temperature/Humidity sensor
Circulation pump
Floor system
Plumbing connectionfor dehumidifi er
RNW dehumidifi er
Terminal board for electrical wiring
Kit Control-Clima Duplex 3Kit Control-Clima Duplex 4Kit Control-Clima Duplex 5Kit Control-Clima Duplex 6Kit Control-Clima Duplex 7Kit Control-Clima Duplex 8Kit Control-Clima Duplex 9 Kit Control-Clima Duplex 10Kit Control-Clima Duplex 11Kit Control-Clima Duplex 12
3461403346140434614053461406346140734614083461409346141034614113461412
3461703346170434617053461706346170734617083461709346171034617113461712
3462003346200434620053462006346200734620083462009346201034620113462012
65x83÷89x1365x83÷89x1365x83÷89x1380x83÷89x1380x83÷89x1380x83÷89x13
100x83÷89x13100x83÷89x13100x83÷89x13100x83÷89x13
78x82x2178x82x2178x82x2192x82x2192x82x2192x82x21
112x82x21112x82x21112x82x21112x82x21
32.833.034.137.438.038.746.046.547.047.5
Description Codepipe (Ø 14)
Codepipe (Ø 17)
Codepipe (Ø 20)
Dimensionslxhxd cm
Shippingdimensions lxhxd cm
Shippingweight
Kg
The diagram shown is to be considered indicative
6
CodePackaging
7301040Single
Code
Code
Code
Code
3308000
3309950
1053040
3309900
CodePackaging
7301030Single
RTU – Temperature and humidity sensor
Anti-condensation insulation
Alpha 25-60 circulation pump with variable head
RT – Temperature sensor
3 high-temperature outlets
Flow and temperature gauge
A wall-mounted room temperature and humidity sensor which allows the user to control the condition of the air in rooms equipped with summer cooling systems.
Anti-condensation insulation for all components which could come into contact with cold water. Recommended in summer cooling systems.
Electronic circulation pump. Its performance is managed by an integrated microprocessor which adapts to the characteristics of the system. The pump automatically adjusts its head and flow rate according to the actual system requirements. Excellent for intercepting one or more circuits with electric heads.
A wall-mounted room temperature sensor equipped with a regulation potentiometer.
Manifold with Ø 3/4” MF on-off valve, 45 mm spacing, with Ø 1/2” B12 outlets for all types of adapters. Electro-thermal heads can be applied on this manifold. Available for kit with 3 up to 11 outlets.
Made of copper and equipped with a ring nut to activate the automatic cleaning device. PN 6. Flow rate 1÷4 L/min. Temperature: 20÷40 °C.
1
3
5
4
6
ACCESSORIES: Kit Control-Clima Duplex
Kit and MTR
2
RDZ Black electrothermic headElectrothermic head to control each circuit through a room thermostat, with or without limit microswitch.Input 230 V. Degree of protection IP 44.(It can be used with TOP COMPOSIT - TOP CONTROL - CONTROL manifolds and high-temperature outlets of Kit and MTR modules).
7 CodeVoltagePackaging
1055220230 Vsingle
CodeVoltagePackaging
1056220230 V + micro
single
STANDARD RDZ 25-55/130 CIRCULATION PUMP ALPHA 25-60 VARIABLE HEAD CIRCULATION PUMP
• Max water temperature: 110 °C• Max operating pressure: 10 bar • G outlet dimensions: 1 ½”• Pump port-to-port distance: 130 mm• Power consumption: 35-90 W
• Frequency: 50 Hz• Power supply: 230 V• Nominal current: 0.21-0.4 A• Protection rating (IEC 34-5): IP42• Insulation rating (IEC 85): F• TF class 110
• Max water temperature: 110 °C• Max operating pressure: 10 bar • G outlet dimensions: 1 ½”• Pump port-to-port distance: 130 mm • Power: 50 Hz • Voltage: 1x230 V
• Power and current absorbed at the speeds of: Speed 1: 45 W 0.2A Speed 2: 64 W 0.29A Speed 3: 82 W 0.36A• Protection rating: (IEC 34-5) 44• Insulation rating: (IEC 85) F• Electrical power supply with Molex type outlet • Product complies with the European standard EN 60335-2-51
CHARACTERISTICS OF THE CIRCULATION PUMPS AND THE MIXING VALVES
< 3-way valve for Kit Control-Clima DuplexBronze body, brass upper portion, balanced stopper in synthetic material suitable for high temperatures, equal-percentage fl ow characteristic and mechanical temperature limitation device with integrated by-pass calibration. The internal valve can be replaced, even while the system is working, without having to drain the system.
• Maximum operating temperature: 90 °C• Power supply: 220 V• Power consumption: 5.5 W• Auxiliary micro-switch capacity: 220V/5A
VJ MIXING VALVE HEAD LOSS DIAGRAM100.000
10.000
1.000
100
10
1
100 1.000 10.000
7
Kit and MTR
ACCESSORIES: Kit Control-Clima Duplex
8
Pre
ssur
e lo
ss (D
aPa/
m)
Flow rate (kg/h)
1/2”3/4”1”
3 - 45 - 8
9 - 12
Ø valve N° outlets
CodeVoltagePackaging
6301010230 Vsingle
CodeVoltagePackaging
6301020230 V + micro
single
CodeVoltagePackaging
630102524 V + micro
single
RDZ White electrothermic head with or without microswitch
Electrothermic heads to control each circuit through a room thermostat. They can be installed upside-down. Display of the functioning mode (open/close), easy installation thanks to its fi xing cotter pin, removable cable for easy replacement. Input 230 V and 24 V. Degree of protection IP 44. (They can be used with MAXI - TOP COMPOSIT - TOP CONTROL - CONTROL manifolds).
8
Kit and MTR
The pre-assembled Kit PF Duplex is used to manage
combined radiator and radiating panel systems. It is
ideal for fl oor heating in both fl ats and houses.
The low-temperature thermoregulation is a “set point”
type and takes place by means of a mixing valve
equipped with a thermostatic head.
RDZ Kit is equipped with a pre-installed and pre-wired
electric panel, thereby making for quick and simple
installation with no additional costs.
High temperature circuits are provided with distribution
manifolds which are equipped with interception valves
and are predisposed for the application of electro-
thermal heads.
Kit PF DuplexSuitable for connection to boilers with integrated pumps.
> IP 43 rated electrical wiring
> Electronic safety thermostat
> Air trap
> Thermostat-predisposed radiator manifolds
Kit PF Duplex Characteristics> Adjustment by means of a three-way mixing valve
> Adjustable thermostatic head with bulb and capillary tube
> 3-speed circulation pump
9
BOILER
BOILER
1
2
3
4
5
6
7
3-way thermostatic mixing valve
Micrometric lockshield
One-way valve
On-off valve
Supply connector
Electrical wiring box
Air trap
The diagram shown is to be considered indicative
Kit PF Duplex 3Kit PF Duplex 4Kit PF Duplex 5Kit PF Duplex 6Kit PF Duplex 7Kit PF Duplex 8Kit PF Duplex 9 Kit PF Duplex 10Kit PF Duplex 11Kit PF Duplex 12
3411403341140434114053411406341140734114083411409341141034114113411412
3411703341170434117053411706341170734117083411709341171034117113411712
3412003341200434120053412006341200734120083412009341201034120113412012
65x83÷89x1365x83÷89x1365x83÷89x1380x83÷89x1380x83÷89x1380x83÷89x13
100x83÷89x13100x83÷89x13100x83÷89x13100x83÷89x13
78x82x2178x82x2178x82x2192x82x2192x82x2192x82x21
112x82x21112x82x21112x82x21112x82x21
32.833.034.137.438.038.746.046.547.047.5
Description Codepipe (Ø 14)
Codepipe (Ø 17)
Codepipe (Ø 20)
Dimensionslxhxd cm
Shippingdimensions lxhxd cm
Shippingweight
Kg
10
ACCESSORIES: Kit PF Duplex
Kit and MTR
1
2
3
Code
Code
Code
3309950
3309900
1053040
3 high-temperature outlets
Alpha 25-60 circulation pump with variable head
Flow and temperature gauge
Manifold with Ø 3/4” MF on-off valve, 45 mm spacing, with Ø 1/2” B12 outlets for all types of adapters. Electro-thermal heads can be applied on this manifold. Available for kit with 3 up to 11 outlets.
Electronic circulation pump. Its performance is managed by an integrated microprocessor which adapts to the characteristics of the system. The pump automatically adjusts its head and flow rate according to the actual system requirements. Excellent for intercepting one or more circuits with electric heads.
Made of copper and equipped with a ring nut to activate the automatic cleaning device. PN 6. Flow rate 1÷4 L/min. Temperature: 20÷40 °C.
5 RDZ White electrothermic head with or without microswitch
Electrothermic heads to control each circuit through a room thermostat. They can be installed upside-down. Display of the functioning mode (open/close), easy installation thanks to its fi xing cotter pin, removable cable for easy replacement. Input 230 V and 24 V. Degree of protection IP 44. (They can be used with MAXI - TOP COMPOSIT - TOP CONTROL - CONTROL manifolds).
CodeVoltagePackaging
6301010230 Vsingle
CodeVoltagePackaging
6301020230 V + micro
single
CodeVoltagePackaging
630102524 V + micro
single
RDZ Black electrothermic head with or without microswitch
Electrothermic heads to control each circuit through a room thermostat. Input 230 V. Degree of protection IP 44. (They can be used with TOP COMPOSIT - TOP CONTROL - CONTROL manifolds and high-temperature outlets of Kit and MTR modules).
4CodeVoltagePackaging
1055220230 Vsingle
CodeVoltagePackaging
1056220230 V + micro
single
11
Kit and MTR
CHARACTERISTICS OF THE CIRCULATION PUMPS AND THE MIXING VALVES
< 3-way valve for the Kit PF DuplexBronze body, brass upper portion, a balanced stopper in synthetic material suitable for high temperatures and an equal-percentage fl ow characteristic. The internal valve can be replaced, even while the system is working, without having to drain the installation. Progressively-opening thermo-static element, graduated-regulation valve and valve bulb with pocket.
• Temperature range: 10 ÷ 50 °C • Hysteresis 0.3 °C time constant: 10 sec. • Max. operating temperature: 90 °C
1/2”3/4”1”
3 - 45 - 8
9 - 12
Ø valve N° outlets
PF MIXING VALVE HEAD LOSS DIAGRAM
100.000
10.000
1.000
100
10
1100 1.000 10.000
1”1”
3/4”1/2”
STANDARD RDZ 25-55/130 CIRCULATION PUMP ALPHA 25-60 VARIABLE HEAD CIRCULATION PUMPP
ress
ure
loss
(DaP
a/m
)
Flow rate (kg/h)
• Max water temperature: 110 °C• Max operating pressure: 10 bar • G outlet dimensions: 1 ½”• Pump port-to-port distance: 130 mm• Power consumption: 35-90 W
• Frequency: 50 Hz• Power supply: 230 V• Nominal current: 0.21-0.4 A• Protection rating (IEC 34-5): IP42• Insulation rating (IEC 85): F• TF class 110
• Max water temperature: 110 °C• Max operating pressure: 10 bar • G outlet dimensions: 1 ½”• Pump port-to-port distance: 130 mm • Power: 50 Hz • Voltage: 1x230 V
• Power and current absorbed at the speeds of: Speed 1: 45 W 0.2A Speed 2: 64 W 0.29A Speed 3: 82 W 0.36A• Protection rating: (IEC 34-5) 44• Insulation rating: (IEC 85) F• Electrical power supply with Molex type outlet • Product complies with the European standard EN 60335-2-51
12
Kit and MTR
The pre-installed Kit VJ 0-10 Duplex is used to manage
combined radiator and underfl oor systems. It is ideal for
fl oor heating and cooling in both fl ats and houses. The
low-temperature thermoregulation takes place by means
of a 3-way mixing valve equipped with a 0-10 electric
motor, which must be controlled by an EVO control unit
external to Kit VJ (not supplied as standard). RDZ Kit
is equipped with a pre-installed and pre-wired electric
panel, thereby making for quick and simple installation
with no additional costs. High temperature circuits are
provided with distribution manifolds which are equipped
with on-off valves and are predisposed for the application
of electro-thermal heads.
Kit VJ 0-10 DuplexSuitable for connection to boilers with integrated pumps.
> Adjustment by means of a three-way mixing valve
> 0-10 electric motor
> 3-speed circulation pump
> IP 43 rated electrical wiring
> Predisposition for EVO control units
> Electronic safety thermostat
> Air trap
> Thermostat-predisposed radiator manifolds
Kit VJ 0-10 Duplex Characteristics
BOILER
CHILLER
13
1
2
3
4
5
6
7
8
9
10
11
12
Boiler (with pump)
Chiller (with pump)
Hydraulic compensator
3-way deviation valves
Thermoregulation Kit VJ 0-10 Duplex
RC or EVO-SA control unit
External sensor
Temperature/Humidity sensor
Circulation pump
Floor system
Line connector
Valve terminal board
Kit and MTR
The diagram shown is to be considered indicative
Kit VJ 0-10 Duplex 3Kit VJ 0-10 Duplex 4Kit VJ 0-10 Duplex 5Kit VJ 0-10 Duplex 6Kit VJ 0-10 Duplex 7Kit VJ 0-10 Duplex 8 Kit VJ 0-10 Duplex 9Kit VJ 0-10 Duplex 10Kit VJ 0-10 Duplex 11Kit VJ 0-10 Duplex 12
3415403341540434154053415406341540734154083415409341541034154113415412
3415703341570434157053415706341570734157083415709341571034157113415712
3415003341500434150053415006341500734150083415009341501034150113415012
65x83÷89x1365x83÷89x1365x83÷89x1380x83÷89x1380x83÷89x1380x83÷89x13
100x83÷89x13100x83÷89x13100x83÷89x13100x83÷89x13
78x82x2178x82x2178x82x2192x82x2192x82x2192x82x21
112x82x21112x82x21112x82x21112x82x21
32.833.034.137.438.038.746.046.547.047.5
Description Codepipe (Ø 14)
Codepipe (Ø 17)
Codepipe (Ø 20)
Dimensionslxhxd cm
Shippingdimensions lxhxd cm
Shippingweight
Kg
14
Kit and MTR
ACCESSORIES: Kit VJ 0-10 Duplex
Code 3309950
Code 1053040
Code 3309900
Alpha 25-60 circulation pump with variable head
3 high-temperature outlets
Flow and temperature gauge
Electronic circulation pump. Its performance is managed by an integrated microprocessor which adapts to the characteristics of the system. The pump automatically adjusts its head and flow rate according to the actual system requirements. Excellent for intercepting one or more circuits with electric heads.
Manifold with Ø 3/4” MF on-off valve, 45 mm spacing, with Ø 1/2” B12 outlets for all types of adapters. Electro-thermal heads can be applied on this manifold. Available for kit with 3 up to 11 outlets.
Made of copper and equipped with a ring nut to activate the automatic cleaning device. PN 6. Flow rate 1÷4 L/min. Temperature: 20÷40 °C.
2
1
3
5CodeVoltagePackaging
6301010230 Vsingle
CodeVoltagePackaging
6301020230 V + micro
single
CodeVoltagePackaging
630102524 V + micro
single
4CodeVoltagePackaging
1055220230 Vsingle
CodeVoltagePackaging
1056220230 V + micro
single
RDZ Black electrothermic head with or without microswitch
Electrothermic heads to control each circuit through a room thermostat. Input 230 V. Degree of protection IP 44. (They can be used with TOP COMPOSIT - TOP CONTROL - CONTROL manifolds and high-temperature outlets of Kit and MTR modules).
RDZ White electrothermic head with or without microswitch
Electrothermic heads to control each circuit through a room thermostat. They can be installed upside-down. Display of the functioning mode (open/close), easy installation thanks to its fi xing cotter pin, removable cable for easy replacement. Input 230 V and 24 V. Degree of protection IP 44. (They can be used with MAXI - TOP COMPOSIT - TOP CONTROL - CONTROL manifolds).
15
Code 3308000
Anti-condensation insulationAnti-condensation insulation for all components which could come into contact with cold water. Recommended in summer cooling systems.
6
STANDARD RDZ 25-55/130 CIRCULATION PUMP ALPHA 25-60 VARIABLE HEAD CIRCULATION PUMP
• Max water temperature: 110 °C• Max operating pressure: 10 bar • G outlet dimensions: 1 ½”• Pump port-to-port distance: 130 mm• Power consumption: 35-90 W
• Frequency: 50 Hz• Power supply: 230 V• Nominal current: 0.21-0.4 A• Protection rating (IEC 34-5): IP42• Insulation rating (IEC 85): F• TF class 110
• Max water temperature: 110 °C• Max operating pressure: 10 bar • G outlet dimensions: 1 ½”• Pump port-to-port distance: 130 mm • Power: 50 Hz • Voltage: 1x230 V
• Power and current absorbed at the speeds of: Speed 1: 45 W 0.2A Speed 2: 64 W 0.29A Speed 3: 82 W 0.36A• Protection rating: (IEC 34-5) 44• Insulation rating: (IEC 85) F• Electrical power supply with Molex type outlet • Product complies with the European standard EN 60335-2-51
CHARACTERISTICS OF THE CIRCULATION PUMPS AND THE MIXING VALVES
< 3-way valve for the Kit VJ DuplexBronze body, brass upper portion, balanced stopper in synthetic material suitable for high temperatures, equal-percentage fl ow characteristic and mechanical temperature limitation device with working by-pass calibration. The internal valve can be replaced, even while the system is working, without having to drain the system.
• Maximum operating temperature: 90 °C• Power supply: 220 V• Power consumption: 5.5 W• Auxiliary micro-switch capacity: 220V/5A
VJ MIXING VALVE HEAD LOSS DIAGRAM100.000
10.000
1.000
100
10
1
100 1.000 10.000
Pre
ssur
e lo
ss (D
aPa/
m)
Flow rate (kg/h)
1/2”3/4”1”
3 - 45 - 8
9 - 12
Ø valve N° outlets
16
Kit and MTR
Kit PF SimplexSuitable for connection to boilers without circulation pumps.
Kit PF Simplex Characteristics
The pre-installed Kit PF Simplex is used to manage
underfl oor systems. It is ideal for fl oor heating in both fl ats
and houses. The low-temperature thermoregulation is a
“set point” type and takes place by means of a mixing
valve equipped with a thermostatic head.
RDZ Kit is equipped with a pre-installed and pre-wired
electric panel, thereby making for quick and simple
installation with no additional costs. In order to achieve
optimal performance, no boiler pump or centralised pump
which presses upon the mixing valve should be installed.
> IP 43 rated electrical wiring
> Electronic safety thermostat
> Air trap
> Adjustment by means of a three-way mixing valve
> Adjustable thermostatic head with bulb and capillary tube
> 3-speed circulation pump
17
1
2
3
4
5
6
3-way thermostatic mixing valve
Output and safety sensors
Supply connector
Electrical wiring box
On-off valve
Air trap
Kit and MTR
The diagram shown is to be considered indicative
Kit PF Simplex 3Kit PF Simplex 4Kit PF Simplex 5Kit PF Simplex 6Kit PF Simplex 7Kit PF Simplex 8Kit PF Simplex 9Kit PF Simplex 10Kit PF Simplex 11Kit PF Simplex 12
3491403349140434914053491406349140734914083491409349141034914113491412
3491703349170434917053491706349170734917083491709349171034917113491712
3492003349200434920053492006349200734920083492009349201034920113492012
65x83÷89x1365x83÷89x1365x83÷89x1380x83÷89x1380x83÷89x1380x83÷89x13
100x83÷89x13100x83÷89x13100x83÷89x13100x83÷89x13
78x82x2178x82x2178x82x2192x82x2192x82x2192x82x21
112x82x21112x82x21112x82x21112x82x21
29.029.429.734.435.336.242.043.244.244.6
Description Codepipe (Ø 14)
Codepipe (Ø 17)
Codepipe (Ø 20)
Dimensionslxhxd cm
Shippingdimensions lxhxd cm
Shippingweight
Kg
BOILERWITHOUT
INTEGRATEDPUMP
18
Kit and MTR
ACCESSORIES: Kit PF Simplex
1
2
3
Code
Code
3309900
1053040
Alpha 25-60 circulation pump with variable head
Flow and temperature gauge
Electronic circulation pump. Its performance is managed by an integrated microprocessor which adapts to the characteristics of the system. The pump automatically adjusts its head and flow rate according to the actual system requirements. Excellent for intercepting one or more circuits with electric heads.
Made of copper and equipped with a ring nut to activate the automatic cleaning device. PN 6. Flow rate 1÷4 L/min. Temperature: 20÷40 °C.
4CodeVoltagePackaging
6301010230 Vsingle
CodeVoltagePackaging
6301020230 V + micro
single
CodeVoltagePackaging
630102524 V + micro
single
CodeVoltagePackaging
1055220230 Vsingle
CodeVoltagePackaging
1056220230 V + micro
single
RDZ White electrothermic head with or without microswitch
Electrothermic heads to control each circuit through a room thermostat. They can be installed upside-down. Display of the functioning mode (open/close), easy installation thanks to its fi xing cotter pin, removable cable for easy replacement. Input 230 V and 24 V. Degree of protection IP 44. (They can be used with MAXI - TOP COMPOSIT - TOP CONTROL - CONTROL manifolds).
RDZ Black electrothermic head with or without microswitch
Electrothermic heads to control each circuit through a room thermostat. Input 230 V. Degree of protection IP 44. (They can be used with TOP COMPOSIT - TOP CONTROL - CONTROL manifolds and high-temperature outlets of Kit and MTR modules).
Kit and MTR
19
CHARACTERISTICS OF THE CIRCULATION PUMPS AND THE MIXING VALVES
< 3-way valve for Kit PF SimplexBronze body, brass upper portion, balanced stopper in synthetic material suitable for high temperatures, equal-percentage fl ow characteristic and a mechanical temperature limitation device with incorporated by-pass calibration. The internal valve can be replaced, even while the system is working, without having to drain the installation.
• Temperature range: 10 ÷ 50 °C • Hysteresis 0.3 °C time constant: 10 sec. • Max operating temperature: 90 °C
1/2”3/4”1”
3 - 45 - 8
9 - 12
Ø valve N° outlets
PF MIXING VALVE HEAD LOSS DIAGRAM
100.000
10.000
1.000
100
10
1100 1.000 10.000
1”1”
3/4”1/2”
STANDARD RDZ 25-55/130 CIRCULATION PUMP ALPHA 25-60 VARIABLE HEAD CIRCULATION PUMPP
ress
ure
loss
(DaP
a/m
)
Flow rate (kg/h)
• Max water temperature: 110 °C• Max operating pressure: 10 bar • G outlet dimensions: 1 ½”• Pump port-to-port distance: 130 mm• Power consumption: 35-90 W
• Frequency: 50 Hz• Power supply: 230 V• Nominal current: 0.21-0.4 A• Protection rating (IEC 34-5): IP42• Insulation rating (IEC 85): F• TF class 110
• Max water temperature: 110 °C• Max operating pressure: 10 bar • G outlet dimensions: 1 ½”• Pump port-to-port distance: 130 mm • Power: 50 Hz • Voltage: 1x230 V
• Power and current absorbed at the speeds of: Speed 1: 45 W 0.2A Speed 2: 64 W 0.29A Speed 3: 82 W 0.36A• Protection rating: (IEC 34-5) 44• Insulation rating: (IEC 85) F• Electrical power supply with Molex type outlet • Product complies with the European standard EN 60335-2-51
Kit and MTR
20
MTR Module Example
Circulation Pump25-100 Magna
BT3 Module DICF Module
HT3 ModuleCirculation Pump
Alpha 25-60
Standard components:
• 3-way mixing valve with integrated by-pass• Adjustment with Control-Clima (MTR CC) or set point (MTR PF) climatic control unit• On-off valves • Micrometric calibration lockshield• Ball valves with fittings • Dial thermometers • MAGNA 25-100 electronic circulation pump with variable flow and head• System load-waste and vent valves• Electronic safety thermostat• Power supply connector • Electric panel with system wired and predisposed for 3 low-temperature and 3 high-temperature zones• Varnished steel cabinet with adjustable support feet
1 2 3
4 5
3
1
4
2
5
21
MTR Module MTR module is a small, thermal unit, both hydraulically and
electrically pre-installed, which comes complete with every element
necessary for operating combined radiator and radiant systems. It
is ideal for fl oor heating and cooling in houses of medium to large
sizes, as well as in commercial applications. As a matter of fact,
the high-performance low-temperature circulation pump is able to
of control systems of over 300 m2. MTR module is equipped with
a pre-installed and pre-wired electric panel, thereby making for
quick and simple installation with no additional costs. It has been
designed for easy installation, especially when the heat source is
“autonomous” typology and comes equipped with all necessary
adjustment and safety devices.
1234
56
A complete pre-assembledsolution.
Ideal for multi-zone systems.
Electrical panel supplied.
It solves all plumbing circuit problems with autonomous and wall-mounted boilers.
Predisposition for underfloorcooling.
Easy installation.
MTR Control-Clima module is a small, pre-installed
thermal unit used to manage combined radiator and
radiant systems. It is ideal for fl oor heating and cooling
in houses of medium to large sizes, as well as in tertiary
commercial application.
The thermoregulation of the low temperatures is managed
by a P.I. action electronic climate control unit based
on microprocessor technology which used to manage
underfl oor systems during both summer and winter.
Thanks to the use of electronically-controlled fl ow and
head circulation pumps (Magna 25-100 and Alpha 25-60)
MTR module is suitable for intercepting single circuits,
both at high and low temperatures.
MTR module is equipped with a pre-installed and pre-
wired electric panel, thereby allowing for quick and simple
installation with no additional costs.
MTR Control-ClimaSummer/winter electronic climate control
22
Kit and MTR
3500600 603x1355x176
Code Dimensionslxhxd mm
> 3-way mixing valve with integrated by-pass> Reversible synchronous electric servomotor> Summer/winter electronic climate control unit with microprocessor> MAGNA 25-100 electronic circulation pump with variable fl ow and head
> Electronic safety thermostat> Electrical power supply connector> Electric system wired and predisposed for the low-temperature zone valves and the high-temperature electro-thermal heads
MTR Control-Clima Characteristics
23
Kit and MTR
BOILERBOILER
radiatorsradiatorszonezone
zone 1zone 1 (e.g. living area) (e.g. living area)
DEHUMIDIFIERDEHUMIDIFIER
zone 2 zone 2 floorfloor
zone 1 zone 1 floorfloor
CHILLERCHILLER
zone 2zone 2 (e.g. sleeping area) (e.g. sleeping area)
DEHUMIDIFIERDEHUMIDIFIER
HEAT PUMP HEAT PUMP (as alternative)(as alternative)
1
2
3
4
5
6
8
7
9
Boiler
Chiller
HPAW-H heat pump(as an alternative to chiller and boiler)
MTR CONTROL-CLIMA
Floor system manifolds
RNW dehumidifi er
TA room temperature sensor
UADC humidity sensor
Radiator zoneMTR CONTROL-CLIMA
The diagram shown is to be considered indicative
24
ACCESSORIES: MTR Control-Clima
Kit and MTR
1
2
3
4
5
Code
Code
Code
Code
Code
Code
3500310
3500280
3500500
3500320
1056220
3500330
Anti-condensation insulation
DICF Module
Alpha 25-60 circulation pump with variable head for high temperature circuits
HT2 high-temperature module with 2 outlets
HT3 high-temperature module with 3 outlets
Anti-condensation insulation for any components which can come into contact with cold water. Recommended in with summer cooling systems.
Optional module for the hydraulic connection of the chiller, which makes for easy commutation from winter to summer running and vice-versa. Made of copper and equipped with two 3/4” ball valves for chiller interception.
Optional circulation pump to supply high-temperature circuits, equipped with power cable for the electrical panel. Its performance is managed by an integrated microprocessor which adaptation to the system characteristics. The pump automatically adjusts its head and fl ow according to the actual system requirements.
A pair of Ø 3/4” copper manifolds with 2+2 outlets which are predisposed for electric heads and come complete with installation fittings.
A pair of Ø 3/4” copper manifolds with 3+3 outlets which are predisposed for electric heads and come complete with installation fittings.
RDZ Black electrothermic head with microElectrothermic head to control each circuit through a room thermostat with limit microswitch.Input 230 V. Degree of protection IP 44.(It can be used with TOP COMPOSIT - TOP CONTROL - CONTROL manifolds and high-temperature outlets of Kit and MTR modules).
25
Kit and MTR
ACCESSORIES: MTR Control-Clima
7Code
Code
3500420
3500430
CodeOutlets
35003322
CodeOutlets
35003333
Pair of low-temperature manifolds with 2 outlets
Pair of low-temperature manifolds with 3 outlets
BT2 low-temperature module for 2 zones
BT3 low-temperature module for 3 zones
Pair of copper manifolds with connectors to supply 2 low-temperature zones.
Pair of copper manifolds with connectors to supply 3 low-temperature zones.
Module used to manage 2 low-temperature zones, complete with a pair of copper manifolds with 2+2 outlets and 2 VZR2 model Ø 1” zone valves with connectors and relevant MVZ thermal actuators.
Module used to manage low-temperature zones, complete with a pair of copper manifolds with 3+3 outlets and 3 VZR2 Ø 1” zone valves with connectors and relevant MVZ thermal actuators.
“Low-temperature” electronic circulation pump “High-temperature” electronic circulation pump
• Minimum water temperature: 15 °C• Maximum water temperature: 95 °C• Minimum room temperature: 0 °C• Maximum room temperature: 40 °C• Maximum operational pressure: 10 bar• G outlet dimensions: 1 ½”• Pump port-to-port distance: 180 mm• Power consumption (P1): 10-185 W• Frequency: 50Hz
• Power supply: 1 x 230-240 V• Current consumption: 0.09-1.25 A• Operational leakage current: <3.5 mA• Protection rating (IEC 34-5): IP44• Insulation rating (IEC 85): F• Noise (sound pressure): less than 54 dB• EMC (Electromagnetic Compatibility): EN 61800-3
• Maximum water temperature: 110 °C• Maximum operational pressure: 10 bar• G outlet dimensions: 1 ½”• Pump port-to-port distance: 130 mm• Power consumption: 35-90 W
• Frequency: 50Hz • Power supply: 230 V • Protection rating (IEC 34-5): IP42• Insulation rating (IEC 85): F• TF Class (EN 60335-2-51): 110
MAGNA 25-100 LOW-TEMPERATURE CIRCULATION PUMP
ALPHA 25-60 VARIABLE HEAD CIRCULATION PUMP
12
10
8
6
4
2
0
H (m)
5,5
5,0
4,5
4,0
3,5
3,0
2,5
2,0
1,5
1,0
0,5
0,0
5 10 Q (m3/h) 0,0 0,4 0,8 1,2 1,6 2,0 2,4 2,8 3,2 3,6 Q (m3/h)
6
H (m)
MTR PFSet point control.
26
Kit and MTR
MTR PF module is a small, pre-installed thermal unit is
used to manage combined radiator and radiant systems. It
is ideal for fl oor heating in houses applications of medium
to large sizes, as well as in commercial application. The
low-temperature thermoregulation is a “set point” type
and takes place by means of a mixing valve equipped
with a thermostatic head.
Thanks to the use of electronically-controlled fl ow and
head circulation pumps (Magna 25-100 and Alpha 25-60)
MTR module is suitable for intercepting single circuits,
both at high and low temperatures.
MTR module is equipped with a pre-installed and pre-
wired electric panel, thereby making for quick and simple
installation with no additional costs.
3500100 603x1155x176
Code Dimensionslxhxd mm
BOILER
e.g. radiators WC1 e.g. radiators WC2
TA radiators
TA radiators
zone 1 (e.g. living area) zone 2 (e.g. sleeping area)
TA floor TA
floor
zone 2 floor
zone 1 floor
> Three-way mixing valve with thermostatic head> Temperature range up to 50 °C (only for heating)> MAGNA 25-100 electronic circulation pump with variable fl ow and head > Electronic safety thermostat
> Electrical power supply connector > Electric system wired and predisposed for the low- temperature zone valves and the high-temperature electro-thermal heads
MTR PF Characteristics
27
Kit and MTR
BOILERBOILER
e.g. radiators WC1 e.g. radiators WC1 e.g. radiators WC2e.g. radiators WC2
TA TA radiatorsradiators
TA TA radiatorsradiators
zone 1zone 1 (e.g. living area) (e.g. living area) zone 2zone 2 (e.g. sleeping area) (e.g. sleeping area)
TA TA floorfloor TA TA
floorfloor
zone 2 zone 2 floorfloor
zone 1 zone 1 floorfloor
1
2
3
4
5
Boiler
MTR PF
Floor system manifolds
TA room temperature sensor
Radiator zone
MTR PFThe diagram shown is to be considered indicative
28
Kit and MTR
ACCESSORIES: MTR PF
1
2
Code
Code
Code
3500500
3500320
3500330
Alpha 25-60 circulation pump with variable head for high temperature circuits
HT2 high-temperature module with 2 outlets
HT3 high-temperature module with 3 outlets
Optional circulation pump to supply high-temperature circuits, equipped with power cable for the electrical panel. Its performance is managed by an integrated microprocessor which adapts to the system features. The pump automatically adjusts its head and flow according to the actual system requirements.
A pair of Ø 3/4” copper manifolds with 2+2 outlets which are predisposed for heads and come complete with installation fittings.
A pair of Ø 3/4” copper manifolds with 3+3 outlets which are predisposed for heads and come complete with installation fittings.
CodeOutlets
35003322
CodeOutlets
35003333
Pair of low-temperature manifolds with 2 outlets
Pair of low-temperature manifolds with 3 outlets
Pair of copper manifolds with connectors to supply 2 low-temperature zones.
Pair of copper manifolds with connectors to supply 3 low-temperature zones.
3Code 1056220
4
RDZ Black electrothermic head with microElectrothermic head to control each circuit through a room thermostat with limit microswitch.Input 230 V. Degree of protection IP 44.(It can be used with TOP COMPOSIT - TOP CONTROL - CONTROL manifolds and high-temperature outlets of Kit and MTR modules).
29
Kit and MTR
ACCESSORIES: MTR PF
5Code
Code
3500420
3500430
BT2 low-temperature module for 2 zones
BT3 low-temperature module for 3 zones
Module used to manage 2 low-temperature zones, complete with a pair of copper manifolds with 2+2 outlets and 2 VZR2 model Ø 1” zone valves with connectors and relevant MVZ thermal actuators.
Module used to manage 3 low-temperature zones, complete with a pair of copper manifolds with 3+3 outlets and 3 VZR2 Ø 1” zone valves with connectors and relevant MVZ thermal actuators.
MAGNA 25-100 LOW TEMPERATURE CIRCULATION PUMP
ALPHA 25-60 VARIABLE HEAD CIRCULATION PUMP
“Low-temperature” electronic circulation pump
“High-temperature” electronic circulation pump
12
10
8
6
4
2
05 10 Q (m3/h)
• Minimum water temperature: 15 °C• Maximum water temperature: 95 °C• Minimum room temperature: 0 °C• Maximum room temperature: 40 °C• Maximum operational pressure: 10 bar• G outlet dimensions: 1 ½”• Pump port-to-port distance: 180 mm• Power consumption (P1):10-185 W• Frequency: 50Hz• Power supply: 1 x 230-240 V• Current consumption: 0.09-1.25 A• Operational leakage current: <3.5 mA• Protection rating (IEC 34-5): IP44• Insulation rating (IEC 85): F• Noise (sound pressure): less than 54 dB• EMC (Electromagnetic Compatibility): EN 61800-3
• Maximum water temperature: 110 °C• Maximum operational pressure: 10 bar• G outlet dimensions: 1 ½”• Pump port-to-port distance: 130 mm• Power consumption: 35-90 W• Frequency: 50Hz• Power supply: 230 V• Protection rating (IEC 34-5): IP42• Insulation rating (IEC 85): F• TF Class (EN 60335-2-51): 110
H (m)
5,5
5,0
4,5
4,0
3,5
3,0
2,5
2,0
1,5
1,0
0,5
0,0
0,0 0,4 0,8 1,2 1,6 2,0 2,4 2,8 3,2 3,6 Q (m3/h)
H (m)
MTR VJ 0-10 unit is a small, pre-installed thermal used
to manage combined radiator and radiant systems. It is
ideal for fl oor heating and cooling in houses of medium
to large sizes, as well as in commercial applications. The
low-temperature thermoregulation takes place by means
of a 3-way mixing valve equipped with a 0-10 electric
motor, which must be controlled by an EVO control unit,
external to MTR module (not supplied as standard).
Thanks to the use of electronically-controlled fl ow and
head circulation pumps (Magna 25-100 and Alpha
25-60) MTR module is suitable for intercepting single
circuits, both at high and low temperatures. MTR module
is equipped with a pre-installed and pre-wired electric
panel, thereby making for quick and simple installation
with no additional costs.
MTR VJ 0-10
30
Kit and MTR
3500700 603x1355x176
Code Dimensionslxhxd mm
> 3-way mixing valve with integrated by-pass> 0-10 analogue servomotor> Predisposition for EVO control units> MAGNA 25-100 electronic circulation pump with variable fl ow and head MAGNA 25-100
> Electronic safety thermostat> Electrical power supply connector> Electric system wired and predisposed for low- temperature zone valves and high-temperature electro-thermal heads
MTR VJ 0-10 Characteristics
31
Kit and MTR
RC2 - CFRC2 - CF
S.E.S.E.
BOILER
CHILLER
Radiatorszone
TAradiators
DEHUMIDIFIER
TA/Hfloor
zone 2floor
TA/Hfloor
DEHUMIDIFIER
zone 1floor
HEAT PUMP (as alternative)
zone 1 (e.g. living area) zone 2 (e.g. sleeping area)
1
2
3
4
5
6
8
7
9
10
11
Boiler
Chiller
HPAW-H heat pump(as an alternative to chiller and boiler)
MTR VJ 0-10
Floor system manifolds
RNW dehumidifi er
RC2-CF control unit (fl oor system)
TA/H room temperature/humidity sensor
Outside sensor
Radiator zone
TA room temperature sensor (radiator zone)
MTR VJ 0-10
The diagram shown is to be considered indicative
32
Kit and MTR
ACCESSORIES: MTR VJ 0-10
1
2
3
4
5
Code
Code
Code
Code
Code
Code
3500310
3500280
3500500
3500320
1056220
3500330
Anti-condensation insulation
DICF Module
Alpha 25-60 circulation pump with variable head for high temperature circuits
Anti-condensation insulation for all components which can come into contact with cold water. Recommended in summer cooling systems.
Optional module for the hydraulic connection of the chiller, which makes for easy commutation from winter to summer running and vice-versa. Made of copper and equipped with two 3/4” ball valves for chiller interception.
Optional circulation pump to supply high-temperature circuits, equipped with power cable for the electrical panel. Its performance is managed by an integrated microprocessor which adapts to the system features. The pump automatically adjusts its head and flow according to the actual system requirements.
HT2 high-temperature module with 2 outlets
HT3 high-temperature module with 3 outlets
A pair of Ø 3/4” copper manifolds with 2+2 outlets which are predisposed for electric heads and come complete with installation fittings.
A pair of Ø 3/4” copper manifolds with 3+3 outlets which are predisposed for electric heads and come complete with installation fittings.
RDZ Black electrothermic head with microElectrothermic head to control each circuit through a room thermostat with limit microswitch.Input 230 V. Degree of protection IP 44.(It can be used with TOP COMPOSIT - TOP CONTROL - CONTROL manifolds and high-temperature outlets of Kit and MTR modules).
33
Kit and MTR
ACCESSORIES: MTR VJ 0-10
7Code
Code
3500420
3500430
CodeOutlets
35003322
CodeOutlets
35003333
BT2 low-temperature module for 2 zones
BT3 low-temperature module for 3 zones
Module used to manage 2 low-temperature zones, complete with a pair of copper manifolds with 2+2 outlets and 2 VZR2 model Ø 1” zone valves with connectors and relative MVZ thermal actuators.
Module used to manage 3 low-temperature zones, complete with a pair of copper manifolds with 3+3 outlets and 3 VZR2 Ø 1” zone valves with connectors and relevant MVZ thermal actuators.
“Low-temperature” electronic circulation pump “High-temperature” electronic circulation pump
• Minimum water temperature: 15 °C• Maximum water temperature: 95 °C• Minimum room temperature: 0 °C• Maximum room temperature: 40 °C• Maximum operational pressure: 10 bar• G outlet dimensions: 1 ½”• Pump port-to-port distance: 180 mm• Power consumption (P1): 10-185 W• Frequency: 50Hz
• Power supply: 1 x 230-240 V• Current consumption: 0.09-1.25 A• Operational leakage current: <3.5 mA• Protection rating (IEC 34-5): IP44• Insulation rating (IEC 85): F• Noise (sound pressure): less than 54 dB• EMC (Electromagnetic Compatibility): EN 61800-3
• Maximum water temperature: 110 °C• Maximum operational pressure: 10 bar• G outlet dimensions: 1 ½”• Pump port-to-port distance: 130 mm• Power consumption: 35-90 W
• Frequency: 50Hz • Power supply: 230 V • Protection rating (IEC 34-5): IP42• Insulation rating (IEC 85): F• TF Class (EN 60335-2-51): 110
MAGNA 25-100 LOW-TEMPERATURE CIRCULATION PUMP
ALPHA 25-60 VARIABLE HEAD CIRCULATION PUMP
12
10
8
6
4
2
0
H (m)
5,5
5,0
4,5
4,0
3,5
3,0
2,5
2,0
1,5
1,0
0,5
0,0
5 10 Q (m3/h) 0,0 0,4 0,8 1,2 1,6 2,0 2,4 2,8 3,2 3,6 Q (m3/h)
6
H (m)
Pair of low-temperature manifolds with 2 outlets
Pair of low-temperature manifolds with 3 outlets
Pair of copper manifolds with connectors to supply 2 low-temperature zones.
Pair of copper manifolds with connectors to supply 3 low-temperature zones.
34
Product Summaries
Double-temperature distribution and regulation kit for underfl oor and high-temperature systems with galvanized steel cabinet with adjustable support feet, brackets, protective cover for plaster, white lockable door and adjustable frame. Control manifolds, 3-way mixing valve, reversible synchronous servomotor, 3-speed circulation pump, micrometric lockshield, one-way valve, on-off valves, thermometers, balancing lockshield, two-way manifolds for high-temperature circuit (predisposed for electro-thermal head), system load-waste and vent valves, electronic safety thermostat, air trap, connector for electrical connections and system wiring. Electronic climate control unit to manage cold underfl oor systems with P.I. technology, interface keyboard to set and check parameters, LCD display, manual switching between summer and winter modes. Upon request, RDZ kit can be equipped with a room temperature sensor or with a combined room temperature/humidity sensor. If the control unit is equipped with a temperature/humidity sensor, it will automatically activate and control RNW dehumidifi er.
Double temperature distribution and regulation kit for underfl oor and high-temperature systems, equipped with a primary circuit closure by-pass, provided with: galvanised steel cabinet with adjustable support feet, brackets, protective cover for plaster, white lockable door and adjustable frame. Control manifolds, 3-way mixing valve with thermostatic control, fi eld of adjustment up to 50 °C (only for heating), 3-speed circulation pump, micrometric lockshield, one-way valve, on-off valves, thermometers, balancing lockshield, two-way manifolds for high-temperature circuit (predisposed for electro-thermal head), system load-waste and vent valves, electronic safety thermostat, air trap, connector for electrical connections and system wiring.
Double temperature distribution and regulation kit for underfl oor and high-temperature systems, equipped with: galvanised steel cabinet with adjustable support feet, brackets, protective cover for plaster, white lockable door and adjustable frame. Control manifolds, 3-way mixing valve, 0-10 analogue servomotor, 3-speed circulation pump, micrometric lockshield, one-way valve, on-off valves, thermometers, balancing lockshield, two-way manifolds for high-temperature circuits (predisposed for electro-thermal head), system load-waste and vent valves, electronic safety thermostat, air trap, connector for electrical connections and system wiring, suitable for being controlled by an external EVO control unit.
Note: the thermoregulation control unit is not supplied as standard.
Distribution and regulation kit for underfl oor systems, provided with: galvanised steel cabinet with adjustable support feet, brackets, protective cover for plaster, white lockable door and adjustable frame. Control manifolds, 3-way mixing valve with thermostatic control, circulation pump, on-off, waste and vent valves, thermometers, electronic safety thermostat, electrical wiring and air trap.
Kit Control-Clima Duplex
Kit PF Duplex
Kit VJ 0-10 Duplex
Kit PF Simplex
35
Product Summaries
MTR Control-Clima module, a small, pre-installed thermal unit used to manage a fl oor system and radiators, including: varnished steel cabinet with adjustable support feet, brackets and white lockable door, 3-way mixing valve with integrated by-pass, reversible synchronous electric servomotor, electronic summer/winter climate control unit with microprocessor, check valves, micrometric calibration lockshield, ball valves with fi ttings, dial thermometers, Magna 25-100 electronic circulation pump with variable fl ow and head, system load-waste and vent valves, electronic safety thermostat, connector for electrical connection and system wiring including wiring for the low-temperature zone valves and the high-temperature electro-thermal heads.
MTR PF module, a small, pre-installed thermal unit used to manage a fl oor system and radiators system, including: varnished steel cabinet with adjustable support feet, brackets and white lockable door, 3-way mixing valve with thermostatic control, temperature range up to 50 °C (only for heating), check valves, micrometric calibration lockshield, ball valves with fi ttings, dial thermometers, Magna 25-100 electronic circulation pump with variable fl ow and head, system load-waste and vent valves, electronic safety thermostat, connector for electrical connections and system wiring including wiring for low-temperature zone valves and high-temperature electro-thermal heads.
MTR VJ 0-10 module, a small, pre-installed thermal unit used to manage a fl oor system and radiators, including: varnished steel cabinet with adjustable support feet, brackets and white lockable door, 3-way mixing valve with integrated by-pass, 0-10 analogue servomotor, reverse-fl ow check valves, micrometric calibration lockshield, ball valves with fi ttings, dial thermometers, Magna 25-100 electronic circulation pump with variable fl ow and head, system load-waste and vent valves, electronic safety thermostat, connector for electrical connections and system wiring including wiring for low-temperature zone valves and high-temperature electro-thermal heads. Suitable for being controlled by an EVO control unit.
Note: the thermoregulation control unit is not supplied as standard.
MTR Control-Clima
MTR PF
MTR VJ 0-10 Duplex