jeremias® exhaust systems - dwgv & swgv · 2019. 7. 3. · exhaust systems warranty we as...
TRANSCRIPT
DWGV & SWGVDouble & Single Wall Special Gas VentØ3‘‘ - Ø36‘‘
Ø3‘‘-Ø12‘‘ Ø13‘‘-Ø36‘‘
www.jeremiasinc.com
2
DWGV & SWGV Double & Single Wall Special Gas Vent
JEREMIAS CONTENTS
INDEX
Introduction
Technical specifications
DWGV Products
Adapters
Supports
Straight lengths
Adjustable lengths
Elbows
Tees
Tee caps
Increasers
Reducers
Flashings
Flashings / Thimbles
Terminations
Accessories
Notes
8 - 58
8
17
24
28
31
35
45
47
48
49
51
52
57
59
5 - 7
3 - 4
An offset calculator for all Jeremias products can be found on the Jeremias website under Downloads/Product data sheets and catalogs
3
INTRODUCTION
JEREMIAS EXHAUST SYSTEMSJeremias Special Gas Vents, Models DWGV and SWGV, were designed specifically for the condensing boiler market where ease of assembly, overall time invested, and price are the main concerns. Unlike our other products, this Special Gas Vent does not have a conical joint. In diameters up to 12”, it uses a gasket to seal the male-to-female connection and is secured by a locking band on the outside. In diameters 13”-36”, it utilizes a male-to-female connection with a V-band and sealant on the inside connection and a Locking band on the outside jacket.
For use with temperatures not exceeding 550°F continuous and pressures not exceeding 20” W.C.
DWGV and SWGV may be intermixed in the same vent system assuming proper clearances and other installation guidelines are maintained for each system. Each may also be intermixed with the DWKL/SWKL Conical systems and/or the DWFL/SWFL Flanged systems.
Jeremias Special Gas Vents are also used for exhausting various other appliances to the outdoors. There are many other applications and uses including, but not limited to the following: boiler stacks, dishwasher exhaust, cool exhaust on coffee roasters, chimney liners, laundry dryer vents, fume venting, paint booth exhausts, particle conveying, chutes, and ventilation ducts.
40 Years of Experience
Jeremias is one of the world`s leading manufacturers of flue and chimney systems for the exhaust of gases and ventilation, covering all kinds of domestic, commercial and industrial applications. Jeremias Group product range includes over fifty (50) different CE or UL certified systems covering commercial and domestic applications complemented by freestanding Industrial steel chimneys up to 10 feet in diameter. Jeremias offers its clients a wide range of high quality products, technical support for projects, and stack sizing software.
With over 40 years of experience in the venting and component exhaust industries, Jeremias has seven (7) manufacturing plants in six (6) different countries worldwide. Jeremias today has more than 1,000 employees and is proud of its German engineering origins, and is now also manufactured in the USA from 100% local materials!
STRONG – OPEN – INTERNATIONAL
4
INTRODUCTION
All Stainless Steel Construction
Jeremias incorporates a UL 1738 approved stainless steel which is required to provide adequate corrosion resistance to flue gas condensation for our inner liner. Underwriters Laboratories (UL) has approved Jeremias (and all other brands) to use types 316L, 444, or AL29-4C© stainless steels for this Listing. These steels have various advantages over the others in this group including better forming, welding, and lower work hardening. The standard model Jeremias outer jacket is constructed of type 304 stainless steel with a bright annealed finish. All accessories (including support plates and angle rings) are also made of stainless steel. This means there is no cross contamination in the factory from carbon steel cutting/welding. Jeremias cleans all external welds to assure the customer clearly sees the quality standard we are setting. Jeremias backs our exhaust systems with a Twenty-Five (25) Year Standard Warranty.
Ease of Installation
Models DWGV and SWGV (3”-12” I.D.) are a cylindrical, factory-built, modular venting system that incorporates a 2.2” overlap and sealed with a 3-ribbed gasket for a for quick and easy assembly in the field. The 2.2” overlap at each connection creates greater stiffness, sealing, and durability compared to ½” flange to flange systems or other gasketed systems. For example, 6” I.D. DWGV has a 41.45 square inch overlap at each joint where a ½” flanged system has only a 9.42 square inch overlap.
The larger diameters (13”-36”) of DWGV and SWGV incorporate an overlapping male-to-female inner connection with external rolled flange for vee band connection. The overlapping inner involves a male spigot which extends completely through the joint 1.25” into the adjacent pipe section. This extended male spigot facilitates alignment of pipe sections, provides support, and isolates the flange/V-band connection and sealant from flue gas condensation. Then the outer jacket of the DWGV is attached with a locking band which securely locks into grooves on both sections of pipe. This makes for the strongest and most rigid joint in the industry.
JEREMIAS EXHAUST SYSTEMS
WarrantyWE AS MANUFACTURER GRANT YOU
25
YEARS
OF WARRANTY ON THE CORROSION RESISTANCEOF OUR STAINLESS STEEL PRODUCTS.
For the pre-conditions please view our General Terms of Guaranteeon www.jeremias.de.
JEREMIAS GMBH | CHIMNEY SYSTEMS | OPFENRIEDER STR. 11-14 | D-91717 WASSERTRÜDINGEN
Research and Development
Jeremias has over fifty (50) CE Certified exhaust and chimney systems worldwide for domestic, commercial, and industrial applications. “CE Certification” is the mandatory conformity safety testing for products sold throughout Europe and other parts of the world. In North America, Jeremias employs only Underwriters’ Laboratories (UL) for testing, certifications, and listings to all applicable UL and ULC Standards.
Opened in 2013, the Jeremias R&D Lab in Logan, OH has the industry’s most experienced lab technicians on staff and incorporates the latest equipment and technologies. This laboratory enables Jeremias to provide industry leadership with a continued focus on new factory-built exhaust applications and unique listings. Jeremias is constantly bringing new innovations to the marketplace and our Logan laboratory enables us to accomplish these changes quickly and effectively.
5
TECHNICAL SPECIFICATIONS
TECHNICAL SPECIFICATIONS
Model and Part Identifications
DWGV, Double Wall Gas Vent(Ø3”-Ø12”) 1” insulating air space(Ø13”-Ø36”) 1.25” insulating air space
DWGV+1, Double Wall Gas Vent(Ø3”-Ø12”) 1” fiber insulated(Ø13”-Ø36”) 1.25” fiber insulated
DWGV+2, Double Wall Gas Vent(Ø3”-Ø12”) 2” fiber insulated(Ø13”-Ø36”) 2.25” fiber insulated
SWGV, Single Wall Gas Vent(Ø3”-Ø36”)
Example 1:DWGV8-36L for an 8 inch diameter Model DWGV DoubleWall, airspace insulated, 36 inches in length
Example 2:DWGV20-90BT10 for a 20 inch diameter Model DWGV Double Wall 90 degree Boot Tee with 10 inch snout
Example 3:SWGV10-45EL for a 10 inch diameter Model SWGV Single Wall 45 Degree Elbow
Material Options and Thicknesses
DWGV
Inner Liner:Type 316L or 444 UL 1738 approved stainless steel
Outer Jacket:Type 304 stainless steel with a Bright Annealed finish
Insulation:1” of air space
Accessories and Supports:Type 304 stainless steel
DWGV+1
Inner Liner:Type 316L or 444 UL 1738 approved stainless steel
Outer Jacket:Type 304 stainless steel with a Bright Annealed finish
Insulation:1” Fiber InsulationAccessories and Supports:Type 304 stainless steel
DWGV+2
Inner Liner:Type 316L or 444 UL 1738 approved stainless steel
Outer Jacket:Type 304 stainless steel with a Bright Annealed finish
Insulation:2“ Fiber Insulation
Accessories and Supports:Type 304 stainless steel
SWGV
Inner Liner:Type 316L or 444 UL 1738 approved stainless steel
Operating Pressures
Jeremias Inc. Gas Vents, Models DWGV and SWGV havebeen evaluated and Listed by UL for positive pressures upto 20” W.C. internal static pressure.
Underwriters Laboratories Listings
UL File Number for All Listings: MH59917
United States:> UL 1738 Standard, Venting Systems for Gas-Burning Appliances, Categories II, III and IV> Class IIC & IIB - PP (Polypropylene), CPVC, and/or PVC applications at 230°F and/or 194°F maximum flue gas temperatures and zero clearance to combustibles> UL 441 Standard, Gas Vents > UL 641 Standard, Type L Low-Temperature Vent
Canada:> ULC S636 Standard for Type BH Gas Venting Systems> Class IIC & IIB - PP (Polypropylene), CPVC, and/or PVC applications at 230°F and/or 194°F maximum flue gas temperatures and zero clearance to combustibles> ULC S605 Standard for Gas Vents> ULC S609 Standard for Low-Temperature Vents Type L
6
TECHNICAL SPECIFICATIONS
TECHNICAL SPECIFICATIONS
Code and Standards
When installed per their instructions, all Jeremias Inc.models are code compliant with the following codes and standards:
> NFPA 31 > NFPA 54 > NFPA 211> NFPA 37 > NFPA 96 > UMC
The following agencies or associations produce codes, standards, or guidelines by which all Jeremias Inc. Models may be installed and used:
> ASHRAE (American Society of Heating, Refrigerating and Air Conditioning Engineers)> CSA (Canadian Standards Association)> IAPMO (International Association of Plumbing and Mechanical Officials)> ICC (International Code Congress)> NFPA (National Fire Protection Association)> UL (Underwriters Laboratories, Inc.)> ULC (Underwriters’ Laboratories of Canada)
Joint Detail
All Jeremias Inc. Gas Vents Models DWGV and SWGV in 3“ - 12“ diameters are cylindrical, factory-built, modular
venting systems that incorporate a lengthy 2.2” overlapping joint with gasket and locking band system for quick and easy assembly in the field. The larger diameters (13”-36”) incorporate an overlapping inner connection with external rolled flange for vee band connection. The overlapping inner protects the silicone seal from flue gas condensation.
The DWGV double wall models are insulated with 1” air space, 1” fiber insulation, or 2” fiber insulation.
Benefits of the Jeremias double wall insulated systems include:
a) Reduced clearance to combustiblesb) Reduced outer pipe skin temperaturesc) Reduced building heat gaind) Increased efficiencies of energy recovery systemse) Reduced noise levels caused by high velocity exhaustsf) Enhanced chimney draft
The SWGV single wall model has no outer jacket.
Benefits of the Jeremias single wall systems include:
a) Fast assemblyb) Clean and neat assembled jointc) Low cost alternative when clearance to combustibles can be maintained
Ø3‘‘-Ø12‘‘
Ø13‘‘-Ø36‘‘
7
DIAMETERS 3, 4, 5, 6, 7, 8, 9, 10, 12, 13, 14, 16, 18, 20, 22, 24, 26, 28, 30, 32, 34, 36
AVAILABLE LENGTHS 9”, 12”, 18”, 24”, 30”, 36”, 42” & 48”
AVAILABLE FITTINGS Any elbow or tee, over 40 catalog fittings per each diameter
AVAILABLE ACCESSORIES All-stainless supports, guides, hangers, and adapters – over 20 accessories per each diameter.
Sizing/Pressure Calculations
Jeremias’ engineering uses its own software based upon the “Chimney, Gas Vent, and Fireplace Systems” chapter of the ASHRAE Handbook to assure that the exhaust and chimney system is sized in accordance with the appliance manufacturers’ installation instructions.
Submittal and Warranted Designs
Jeremias can also provide submittals that show all required accessories, including drains, supports etc., to be in accordance with any specific appliance manufacturers’ installation instructions.
TECHNICAL SPECIFICATIONS
TECHNICAL SPECIFICATIONS
Product Specifications
WEIGHT (LBS. PER FT.)
PIPE SIZE DWGV SWGV
3“ 1.5 0.66
4“ 1.9 0.87
5“ 2.2 1.09
6“ 2.5 1.31
7“ 2.9 1.53
8“ 3.2 1.75
9“ 3.6 1.97
10“ 4.0 2.19
12“ 4.7 2.62
13“ 8.4 4.80
14“ 12.0 5.17
16“ 13.5 5.91
18“ 15.1 6.65
20“ 16.7 7.39
22“ 18.2 8.13
24“ 19.8 8.87
26“ 21.4 9.61
28“ 22.9 10.34
30“ 24.5 11.08
32“ 26.1 11.82
34“ 27.7 13.56
36“ 29.2 13.30
Pipe Weight per Foot
The approximate installed weight of the DWGV exhaust system can be found using this table. This table does not include accessories such as supports and guides, nor shipping packaging or palletizing weight (LBS per foot).
8
ADAPTERS
DWGV PRODUCTS
Ø ØA ØB3 3 5
4 4 6
5 5 7
6 6 8
7 7 9
8 8 10
9 9 11
10 10 12
12 12 14
Raw Collar Adapter - Outside - Start / DWGVØ-RCOS
* - Installed lengths. Includes Locking Band with gear Clamp.
Raw Collar Outside Adapter / DWGVØ-RCO
Ø ØA13 13
14 14
16 16
18 18
20 20
22 22
24 24
26 26
28 28
30 30
32 32
34 34
36 36
Includes Locking Band with Latch Clamp
ØA
3.54
9
Ø ØA ØB3 3 5
4 4 6
5 5 7
6 6 8
7 7 9
8 8 10
9 9 11
10 10 12
12 12 14
Raw Collar Adapter - Outside - Start - Large / DWGVØ-RCOS-LG Raw Collar Outside Adapter - Large / DWGVØ-RCO-LG
Ø ØA13 13
14 14
16 16
18 18
20 20
22 22
24 24
26 26
28 28
30 30
32 32
34 34
36 36
Includes Locking Band with Latch Clamp
ADAPTERS
DWGV PRODUCTS
* - Installed lengths. Includes Locking Band with gear Clamp.
ØA+0.25“
3.54
10
DWGV to SWGV Adapter / DWGVØ-D2S
Ø ØA ØB3 3 5
4 4 6
5 5 7
6 6 8
7 7 9
8 8 10
9 9 11
10 10 12
12 12 14
Includes Locking Band with gear Clamp
SWGV to DWGV Adapter / DWGVØ-S2D
Ø ØA ØB3 3 5
4 4 6
5 5 7
6 6 8
7 7 9
8 8 10
9 9 11
10 10 12
12 12 14
ADAPTERS
DWGV PRODUCTS
Includes Locking Band with Latch Clamp
11
Ø ØA ØB3 3 5
4 4 6
5 5 7
6 6 8
7 7 9
8 8 10
9 9 11
10 10 12
12 12 14
Raw Collar Adapter - Inside - Start / DWGVØ-RCIS
Includes Locking Band with gear Clamp
Raw Collar Inside Adapter / DWGVØ-RCI
Ø ØA13 13
14 14
16 16
18 18
20 20
22 22
24 24
26 26
28 28
30 30
32 32
34 34
36 36
6.0
6
A - 0.15"
8.2
5
A
4.3
0
B
femalesw-gv
maledw-gv
malesw-kl
M 1:5 (Ø6)
gasket
Ø 3 4 5 6 7 8 9 10 12A 3 4 5 6 7 8 9 10 12B 5 6 7 8 9 10 11 12 14lb 0.89 1.13 1.37 1.61 1.85 2.09 2.33 2.57 3.06
1 2 3 4
A
B
C
D
E
F
© je
rem
ias
Gm
bH. A
ll rig
hts
rese
rved
, als
o re
gard
ing
any
disp
osal
, exp
loita
tion,
edi
ting,
dis
tribu
tion,
as
wel
l as
in th
e ev
ent o
f app
licat
ions
for i
ndus
trial
pro
perty
righ
ts.
description
code
drawing no.
1 of 1
format
scale
sheet
USLETTERRaw Collar Adapter - Inside - Start
DWGVØ-RCIS
1:3inch / lb
modified by
approved by
revisions-no.
namedate
checked by
drawn by
surface:inside/outside
material:inside/outside
UL-no.
6/7/2018 DAR
ADAPTERS
DWGV PRODUCTS
Includes Locking Band with Latch Clamp
6.5
0
2.6
0
ØA
12
ADAPTERS
DWGV PRODUCTS
Ø ØA ØB3 3 5
4 4 6
5 5 7
6 6 8
7 7 9
8 8 10
9 9 11
10 10 12
12 12 14
Raw Collar Adapter - Inside - Start - Small / DWGVØ-RCIS-SM Raw Collar Inside Adapter - Small / DWGVØ-RCI-SM
Ø ØA13 13
14 14
16 16
18 18
20 20
22 22
24 24
26 26
28 28
30 30
32 32
34 34
36 36
6.0
6
A - 0.15"
8.2
5
A
4.3
0
B
femalesw-gv
maledw-gv
malesw-kl
M 1:5 (Ø6)
gasket
Ø 3 4 5 6 7 8 9 10 12A 3 4 5 6 7 8 9 10 12B 5 6 7 8 9 10 11 12 14lb 0.89 1.13 1.37 1.61 1.85 2.09 2.33 2.57 3.06
1 2 3 4
A
B
C
D
E
F
© je
rem
ias
Gm
bH. A
ll rig
hts
rese
rved
, als
o re
gard
ing
any
disp
osal
, exp
loita
tion,
edi
ting,
dis
tribu
tion,
as
wel
l as
in th
e ev
ent o
f app
licat
ions
for i
ndus
trial
pro
perty
righ
ts.
description
code
drawing no.
1 of 1
format
scale
sheet
USLETTERRaw Collar Adapter - Inside - Start
DWGVØ-RCIS
1:3inch / lb
modified by
approved by
revisions-no.
namedate
checked by
drawn by
surface:inside/outside
material:inside/outside
UL-no.
6/7/2018 DAR
-0.25‘‘
Includes Locking Band with gear Clamp Includes Locking Band with Latch Clamp
6.5
0
2.6
0
ØA-0,25‘‘
13
Ø ØA ØB3 3 5
4 4 6
5 5 7
6 6 8
7 7 9
8 8 10
9 9 11
10 10 12
12 12 14
DWGV to SWKL Adapter / DWGVØ-SWKLØ
Includes Locking Band with gear Clamp
Ø ØA ØB3 3 5
4 4 6
5 5 7
6 6 8
7 7 9
8 8 10
9 9 11
10 10 12
12 12 14
Universal Adapter / DWGVØ-UAA
8.2
5
B
A
M 1:6 (Ø6)
Ø 3 4 5 6 7 8 9 10 12A 3 4 5 6 7 8 9 10 12B 5 6 7 8 9 10 11 12 14lb 1.83 2.16 2.49 2.81 3.14 3.47 3.79 4.12 4.77
1 2 3 4
A
B
C
D
E
F
© je
rem
ias
Gm
bH. A
ll rig
hts
rese
rved
, als
o re
gard
ing
any
disp
osal
, exp
loita
tion,
edi
ting,
dis
tribu
tion,
as
wel
l as
in th
e ev
ent o
f app
licat
ions
for i
ndus
trial
pro
perty
righ
ts.
description
code
drawing no.
1 of 1
format
scale
sheet
USLETTERRaw Collar Adapter - Outside - Start
DWGVØ-RCOS
1:3inch / lb
modified by
approved by
revisions-no.
namedate
checked by
drawn by
surface:inside/outside
material:inside/outside
UL-no.
5/30/2018 DAR
ADAPTERS
DWGV PRODUCTS
14
ADAPTERS
DWGV PRODUCTS
Ø A B ØC D E4 4 6 4.47 2.5 9
6 6 8 6.6 3.5 10
8 8 10 8.6 4.5 11
10 10 12 10.72 5.5 12
12 12 14 12.72 6.5 13
PVC Adapter - Start / DWGVØ-PVCS
E -
2.19
C
B
A
D
E
n
femalesw-gv
maledw-gv
M 1:8 (Ø6)
gasket
Ø 3 4 5 6 8 10 12A 3 4 5 6 8 10 12B 5 6 7 8 10 12 14ØC 3.47 4.47 5.54 6.6 8.6 10.72 12.72D 2 2.5 3.5 3.5 4.5 5.5 6.5E 8.5 9 10 10 11 12 13n 2 3lb 1.02 1.30 1.68 1.98 2.70 3.52 4.39
1 2 3 4
A
B
C
D
E
F
© je
rem
ias
Gm
bH. A
ll rig
hts
rese
rved
, als
o re
gard
ing
any
disp
osal
, exp
loita
tion,
edi
ting,
dis
tribu
tion,
as
wel
l as
in th
e ev
ent o
f app
licat
ions
for i
ndus
trial
pro
perty
righ
ts.
description
code
drawing no.
1 of 1
format
scale
sheet
USLETTERPVC Adpater - Start
DWGVØ-PVCS
1:3inch / lb
modified by
approved by
revisions-no.
namedate
checked by
drawn by
surface:inside/outside
material:inside/outside
UL-no.
11/27/2018 DAR
Flange Collar - Start / DWGVØ-FCS
C
4.3
0
B
4.8
1
7.0
0
A
femalesw-gv
maledw-gv
M 1:6 (Ø6) Ø 3 4 5 6 7 8 9 10 12A 3 4 5 6 7 8 9 10 12B 5 6 7 8 9 10 11 12 14ØC 4.1 5.1 6.1 7.1 8.1 9.1 10.1 11.1 13.1lb 0.91 1.14 1.37 1.59 1.82 2.05 2.27 2.50 2.95
1 2 3 4
A
B
C
D
E
F
© je
rem
ias
Gm
bH. A
ll rig
hts
rese
rved
, als
o re
gard
ing
any
disp
osal
, exp
loita
tion,
edi
ting,
dis
tribu
tion,
as
wel
l as
in th
e ev
ent o
f app
licat
ions
for i
ndus
trial
pro
perty
righ
ts.
description
code
drawing no.
1 of 1
format
scale
sheet
USLETTERFlange Collar Adapter - Start
DWGVØ-FCS
2:5inch / lb
modified by
approved by
revisions-no.
namedate
checked by
drawn by
surface:inside/outside
material:inside/outside
UL-no.
11/19/2018 DAR
Ø A B ØC3 3 5 4.1
4 4 6 5.1
5 5 7 6.1
6 6 8 7.1
7 7 9 8.1
8 8 10 9.1
9 9 11 10.1
10 10 12 11.1
12 12 14 13.1
15
For more adapters, please see adapter matrix on website for complete listing.
Flange Collar - End / DWGVØ-FCE
Ø A B ØC3 3 5 4.1
4 4 6 5.1
5 5 7 6.1
6 6 8 7.1
7 7 9 8.1
8 8 10 9.1
9 9 11 10.1
10 10 12 11.1
12 12 14 13.1
C
B
4.3
0
7.0
0
A
malesw-gv
femaledw-gv
M 1:6 (Ø6)
Ø 3 4 5 6 7 8 9 10 12A 3 4 5 6 7 8 9 10 12B 5 6 7 8 9 10 11 12 14ØC 4.1 5.1 6.1 7.1 8.1 9.1 10.1 11.1 13.1lb 1.17 1.43 1.70 1.96 2.22 2.48 2.74 3.01 3.53
1 2 3 4
A
B
C
D
E
F
© je
rem
ias
Gm
bH. A
ll rig
hts
rese
rved
, als
o re
gard
ing
any
disp
osal
, exp
loita
tion,
edi
ting,
dis
tribu
tion,
as
wel
l as
in th
e ev
ent o
f app
licat
ions
for i
ndus
trial
pro
perty
righ
ts.
description
code
drawing no.
1 of 1
format
scale
sheet
USLETTERFlange Collar Adapter - End
DWGVØ-FCE
2:5inch / lb
modified by
approved by
revisions-no.
namedate
checked by
drawn by
surface:inside/outside
material:inside/outside
UL-no.
11/19/2018 DAR
GV to FL Adapter / DWGVØ-GV2FL
Ø A B C D5 5 7 5 7.5
6 6 8 6 8.5
7 7 9 7 9.5
8 8 10 8 10.5
9 9 11 9 11.5
10 10 12 10 12.5
12 12 14 12 14.5
ADAPTERS
DWGV PRODUCTS
ØB
ØA
ØC
ØD
5.70
2.0
04
30
12.0
0
16
ADAPTERS
DWGV PRODUCTS
GV to KL Adapter / DWGVØ-GV2KL
Ø A B C D3 3 5 3 5.5
4 4 6 4 6.5
5 5 7 5 7.5
6 6 8 6 8.5
7 7 9 7 9.5
8 8 10 8 10.5
9 9 11 9 11.5
10 10 12 10 12.5
12 12 14 12 14.5
ØB
ØA
ØC
ØD
12.0
0
9.8
0
2.0
05.
704
.30
17
3.0
0
0.75 B
0.33
included bolts and nuts1/4"-20 x 1"
by installer
Ø6 - M 1:8
by installer
A
0.0
8
DETAIL ASCALE 1 : 2
Ø 3 4 5 6 7 8 9 10 12A 3 4 5 6 7 8 9 10 12B 5 6 7 8 9 10 11 12 14t 0.025lb 0.76 0.87 0.97 1.08 1.18 1.29 1.4 1.5 1.71
1 2 3 4
A
B
C
D
E
F
© je
rem
ias
Gm
bH. A
ll rig
hts
rese
rved
, als
o re
gard
ing
any
disp
osal
, exp
loita
tion,
edi
ting,
dis
tribu
tion,
as
wel
l as
in th
e ev
ent o
f app
licat
ions
for i
ndus
trial
pro
perty
righ
ts.
description
code
drawing no.
1 of 1
format
scale
sheet
USLETTERLight Support Band
DWGVØ-LSB
1:5
02-02-05-20501-909
inch / lb
modified by
approved by
revisions-no.see page 2 see page 2 A0
namedate
checked by
drawn by
surface:inside/outside
material:inside/outside
UL-1009
06.02.2017 FBA
Ø B3 54 65 76 87 98 109 1110 1212 1413 15.614 16.616 18.618 20.620 22.622 24.624 26.626 28.628 30.630 32.632 34.634 36.636 38.6
Light Support Band / DWGVØ-LSB
DWGV PRODUCTS
SUPPORTS
Wire not included
Anchor Plate Support / DWGVØ-APS
Ø ØA ØB C ØD3 3 5 11.50 8.35
4 4 6 11.71 8.56
5 5 7 11.92 8.77
6 6 8 12.92 9.77
7 7 9 13.92 10.77
8 8 10 14.92 11.77
9 9 11 15.92 12.77
10 10 12 16.92 13.77
12 12 14 18.92 15.77
Includes Locking Band with gear Clamp
4.3
0 4
.30
8.6
6
6.4
7
B
A
1.6
0
femaledw-gv
maledw-gv
femalesw-gv
malesw-gv
n 1
.38
D
C
0.79
M 1:10 (Ø6)
gasket
Ø 3 4 5 6 7 8 9 10 12A 3 4 5 6 7 8 9 10 12B 5 6 7 8 9 10 11 12 14C 11.5 11.71 11.92 12.92 13.92 14.92 15.92 16.92 18.92D 8.35 8.56 8.77 9.77 10.77 11.77 12.77 13.77 15.77n 4lb 3.95 4.28 4.58 5.22 5.88 6.54 7.21 7.88 9.25
1 2 3 4
A
B
C
D
E
F
© je
rem
ias
Gm
bH. A
ll rig
hts
rese
rved
, als
o re
gard
ing
any
disp
osal
, exp
loita
tion,
edi
ting,
dis
tribu
tion,
as
wel
l as
in th
e ev
ent o
f app
licat
ions
for i
ndus
trial
pro
perty
righ
ts.
description
code
drawing no.
1 of 1
format
scale
sheet
USLETTERAnchor Plate Support
DWGVØ-APS
1:6inch / lb
modified by
approved by
revisions-no.
namedate
checked by
drawn by
surface:inside/outside
material:inside/outside
UL-no.
5/18/2018 DAR
4.3
0 4
.30
8.6
6
6.4
7
B
A
1.6
0
femaledw-gv
maledw-gv
femalesw-gv
malesw-gv
n
1.3
8
D
C
0.79
M 1:10 (Ø6)
gasket
Ø 3 4 5 6 7 8 9 10 12A 3 4 5 6 7 8 9 10 12B 5 6 7 8 9 10 11 12 14C 11.5 11.71 11.92 12.92 13.92 14.92 15.92 16.92 18.92D 8.35 8.56 8.77 9.77 10.77 11.77 12.77 13.77 15.77n 4lb 3.95 4.28 4.58 5.22 5.88 6.54 7.21 7.88 9.25
1 2 3 4
A
B
C
D
E
F
© je
rem
ias
Gm
bH. A
ll rig
hts
rese
rved
, als
o re
gard
ing
any
disp
osal
, exp
loita
tion,
edi
ting,
dis
tribu
tion,
as
wel
l as
in th
e ev
ent o
f app
licat
ions
for i
ndus
trial
pro
perty
righ
ts.
description
code
drawing no.
1 of 1
format
scale
sheet
USLETTERAnchor Plate Support
DWGVØ-APS
1:6inch / lb
modified by
approved by
revisions-no.
namedate
checked by
drawn by
surface:inside/outside
material:inside/outside
UL-no.
5/18/2018 DAR
18
DWGV PRODUCTS
SUPPORTS
Anchor Plate Support / DWGVØ-APS
Ø ØA ØB C13 13 15.5 21.56
14 14 16.5 22.56
16 16 18.5 24.56
18 18 20.5 26.56
20 20 22.5 28.56
22 22 24.5 30.56
24 24 26.5 32.56
26 26 28.5 34.56
28 28 30.5 36.56
30 30 32.5 38.56
32 32 34.5 40.56
34 34 36.5 42.56
36 36 38.5 44.56
Includes Locking Band with gear Clamp
Plate Support / DWGVØ-PS
Ø ØC ØD E13 13.7 19.56 21.56
14 14.7 20.56 22.56
16 16.7 22.56 24.56
18 18.7 24.56 26.56
20 20.7 26.56 28.56
22 22.7 28.56 30.56
24 24.7 30.56 32.56
26 26.7 32.56 34.56
28 28.7 34.56 36.56
30 30.7 36.56 38.56
32 32.7 38.56 40.56
34 34.7 40.56 42.56
36 36.7 42.56 44.56
Includes Locking Band with gear Clamp
D -
1.5
D
E
1.0
0
1.00
0.44 C
n
M 1:10 (Ø6)
Ø 5 6 7 8 9 10 11 12 13 14 16 18 20 22 24 26 28 30 32 34 36ØC 5.7 6.7 7.7 8.7 9.7 10.7 11.7 12.7 13.7 14.7 16.7 18.7 20.7 22.7 24.7 26.7 28.7 30.7 32.7 34.7 36.7ØD 11.56 12.56 13.56 14.56 15.56 16.56 17.56 18.56 19.56 20.56 22.56 24.56 26.56 28.56 30.56 32.56 34.56 36.56 38.56 40.56 42.56E 13.56 14.56 15.56 16.56 17.56 18.56 19.56 20.56 21.56 22.56 24.56 26.56 28.56 30.56 32.56 34.56 36.56 38.56 40.56 42.56 44.56n 8 12 16lb 13.93 15.57 17.22 18.89 20.79 22.51 24.25 26.01 27.80 29.61 33.29 37.06 40.91 44.86 48.90 53.22 57.44 61.74 66.13 70.61 75.18
1 2 3 4
A
B
C
D
E
F
© je
rem
ias
Gm
bH. A
ll rig
hts
rese
rved
, als
o re
gard
ing
any
disp
osal
, exp
loita
tion,
edi
ting,
dis
tribu
tion,
as
wel
l as
in th
e ev
ent o
f app
licat
ions
for i
ndus
trial
pro
perty
righ
ts.
description
code
drawing no.
1 of 1
format
scale
sheet
USLETTERPlate Support
DWFLØ-PS+1
1:5inch / lb
modified by
approved by
revisions-no.
namedate
checked by
drawn by
surface:inside/outside
material:inside/outside
UL-no.
7/2/2018 DAR
ØA
ØB
Ø0.441.00
1.00
12.4
3
11.18
2.4
8
5.50
5.50
C
19
DWGV PRODUCTS
SUPPORTS
Full Angle Ring / DWKLØ-FAR
Ø ØA ØB C D E3 3 5.5 5.69 7.80 9.504 4 6.5 6.69 8.80 10.505 5 7.5 7.69 9.80 11.506 6 8.5 8.69 10.80 12.507 7 9.5 9.69 11.80 13.508 8 10.5 10.69 12.80 14.509 9 11.5 11.69 13.80 15.5010 10 12.5 12.69 14.80 16.5012 12 14.5 14.69 16.80 18.5013 13 15.5 15.69 17.80 19.5014 14 16.5 16.69 18.80 20.5016 16 18.5 18.69 20.80 22.5018 18 20.5 20.69 22.80 24.5020 20 22.5 22.69 24.80 26.5022 22 24.5 24.69 26.80 28.5024 24 26.5 26.69 28.80 30.5026 26 28.5 28.69 30.80 32.5028 28 30.5 30.69 32.80 34.5030 30 32.5 32.69 34.80 36.5032 32 34.5 34.69 36.80 38.5034 34 36.5 36.69 38.80 40.5036 36 38.5 38.69 40.80 42.50
2.2
0
0.4
38
1.20
Ø6 - 1:8
C
D
E
0.438
included nuts, washers and bolts 1/4"-20 x 1"
Ø 3 4 5 6 7 8 9 10 11 12 13 14 16 18 20 22 24 26 28 30 32 34 36A 3 4 5 6 7 8 9 10 11 12 13 14 16 18 20 22 24 26 28 30 32 34 36
B 5.5 6.5 7.5 8.5 9.5 10.5 11.5 12.5 13.5 14.5 15.5 16.5 18.5 20.5 22.5 24.5 26.5 28.5 30.5 32.5 34.5 36.5 38.5
C 5.69 6.69 7.69 8.69 9.69 10.69 11.69 12.69 13.69 14.69 15.69 16.69 18.69 20.69 22.69 24.69 26.69 28.69 30.69 32.69 34.69 36.69 38.69
D 7.80 8.80 9.80 10.80 11.80 12.80 13.80 14.80 15.80 16.80 17.80 18.80 20.80 22.80 24.80 26.80 28.80 30.80 32.80 34.80 36.80 38.80 40.80
E 9.50 10.50 11.50 12.50 13.50 14.50 15.50 16.50 17.50 18.50 19.50 20.50 22.50 24.50 26.50 28.50 30.50 32.50 34.50 36.50 38.50 40.50 42.50
t 0.16
lb 340 389 437 486 534 583 632 680 729 777 826 874 971 1.068 1.165 1.262 1.360 1.457 1.554 1.651 1.748 1.845 1.942
1 2 3 4
A
B
C
D
E
F
© je
rem
ias
Gm
bH. A
ll rig
hts
rese
rved
, als
o re
gard
ing
any
disp
osal
, exp
loita
tion,
edi
ting,
dis
tribu
tion,
as
wel
l as
in th
e ev
ent o
f app
licat
ions
for i
ndus
trial
pro
perty
righ
ts.
description
code
drawing no.
1 of 1
format
scale
sheet
USLETTERFull Angle Ring
DWKLØ-FAR
1:5
02-02-10-20350-550
inch / lb
modified by
approved by
revisions-no.444304
2BBA A
namedate
checked by
drawn by
surface:inside/outside
material:inside/outside
14.11.2016 FBA
Half Angle Ring / DWKLØ-HAR
2.2
0
0.76
0.4
4
E
C
D
M 1:6 (Ø6)
Ø 3 4 5 6 7 8 9 10 11 12 13 13 14 16 18 20 22 24 26 28 30 32 34 36ØC 5.68 6.72 7.72 8.72 9.72 10.72 11.72 12.72 13.72 14.72 15.72 15.72 16.72 18.72 20.72 22.72 24.72 26.72 28.72 30.72 32.72 34.72 36.72 38.72ØD 7.8 8.8 9.8 10.8 11.8 12.8 13.8 14.8 15.8 16.8 17.8 17.8 18.8 20.8 22.8 24.8 26.8 28.8 30.8 32.8 34.8 36.8 38.8 40.8ØE 9.5 10.5 11.5 12.5 13.5 14.5 15.5 16.5 17.5 18.5 19.5 19.5 20.5 22.5 24.5 26.5 28.5 30.5 32.5 34.5 36.5 38.5 40.5 42.5lb 2.22 2.53 2.85 3.17 3.48 3.80 4.12 4.43 4.75 5.07 5.39 5.39 5.70 6.34 6.97 7.61 8.24 8.88 9.51 10.14 10.78 11.41 12.05 12.68
1 2 3 4
A
B
C
D
E
F
© je
rem
ias
Gm
bH. A
ll rig
hts
rese
rved
, als
o re
gard
ing
any
disp
osal
, exp
loita
tion,
edi
ting,
dis
tribu
tion,
as
wel
l as
in th
e ev
ent o
f app
licat
ions
for i
ndus
trial
pro
perty
righ
ts.
description
code
drawing no.
1 of 1
format
scale
sheet
USLETTERHalf Angle Ring
DWKLØ-HAR
1:3inch / lb
modified by
approved by
revisions-no.
namedate
checked by
drawn by
surface:inside/outside
material:inside/outside
UL-no.
8/27/2018 DAR
Ø ØC ØD ØE3 5.68 7.80 9.504 6.72 8.80 10.505 7.72 9.80 11.506 8.72 10.80 12.507 9.72 11.80 13.508 10.72 12.80 14.509 11.72 13.80 15.5010 12.72 14.80 16.5012 14.72 16.80 18.5013 15.72 17.80 19.5014 16.72 18.80 20.5016 18.72 20.80 22.5018 20.72 22.80 24.5020 22.72 24.80 26.5022 24.72 26.80 28.5024 26.72 28.80 30.5026 28.72 30.80 32.5028 30.72 32.80 34.5030 32.72 34.80 36.5032 34.72 36.80 38.5034 36.72 38.80 40.5036 38.72 40.80 42.50
20
DWGV PRODUCTS
SUPPORTS
Ø ØB C D E3 5 3.62 6.38 7.56
4 6 4.62 7.38 8.56
5 7 5.62 8.38 9.56
6 8 6.62 9.38 10.56
7 9 7.62 10.38 11.56
8 10 8.62 11.38 12.56
9 11 9.62 12.38 13.56
10 12 10.62 13.38 14.56
12 14 12.62 15.38 16.56
Wall Band / DWGVØ-WBA
Ø C D3 11.81 21.064 11.81 21.065 12.99 22.246 13.78 22.247 13.78 22.248 15.75 24.219 17.72 24.2110 17.72 24.2112 19.69 26.1813 21.65 26.1814 21.65 26.1816 23.62 28.1518 25.59 28.1520 27.56 30.1222 29.53 30.1224 29.53 30.1226 31.50 34.0628 33.46 36.0230 35.43 37.9932 37.40 39.9634 39.37 41.9336 41.34 43.90
Wall Brackets for Anchor Plate Support & Full Angle Ring / DWGVØ-WB
21
DWGV PRODUCTS
SUPPORTS
Drain Tee Cap for support / DWGVØ-DCSS
Ø ØA ØB C3 3 54 4 65 5 76 6 87 7 98 8 109 9 1110 10 1212 12 1413 13 15.5 9.9614 14 16.5 9.9616 16 18.5 9.9618 18 20.5 9.9620 20 22.5 9.9622 22 24.5 9.9624 24 26.5 9.9626 26 28.5 11.2228 28 30.5 11.2230 30 32.5 11.2232 32 34.5 11.2234 34 36.5 11.2236 36 38.5 11.22
Works with SBP. Includes Locking Band with gear Clamp.
2.00
8.2
0
6.0
1
4.3
2
A - 0.8
B
A
ø5/8" x 2" drain
maledw-gv
femalesw-gv
femaledw-gv
n
M 1:6 (Ø6)
gasket
Ø 3 4 5 6 7 8 9 10 12A 3 4 5 6 7 8 9 10 12B 5 6 7 8 9 10 11 12 14n 4lb 1.66 2.10 2.58 3.10 3.66 4.26 4.89 5.56 7.00
1 2 3 4
A
B
C
D
E
F
© je
rem
ias
Gm
bH. A
ll rig
hts
rese
rved
, als
o re
gard
ing
any
disp
osal
, exp
loita
tion,
edi
ting,
dis
tribu
tion,
as
wel
l as
in th
e ev
ent o
f app
licat
ions
for i
ndus
trial
pro
perty
righ
ts.
description
code
drawing no.
1 of 1
format
scale
sheet
USLETTERDrain Tee Cap for Support Base
DWGVØ-DCSS
1:3inch / lb
modified by
approved by
revisions-no.
namedate
checked by
drawn by
surface:inside/outside
material:inside/outside
UL-no.
6/1/2018 DAR
Ø3‘‘-Ø12‘‘ Ø13‘‘-Ø36‘‘
Ø ØB C3 5 7.65
4 6 8.65
5 7 9.65
6 8 10.65
7 9 11.65
8 10 12.65
9 11 13.65
10 12 14.65
12 14 16.65
13 15.5 18.16
14 16.5 19.16
16 18.5 21.16
18 20.5 23.16
20 22.5 25.16
22 24.5 27.16
24 26.5 29.16
Support with square base plate / DWGVØ-SBP
ØB
ØA-0.8
C
ØA
3.00
Ø3‘‘-Ø12‘‘
Ø13‘‘-Ø36‘‘
22
DWGV PRODUCTS
SUPPORTS
Elbow 90° with support leg / DWGVØ-90ES
Ø ØA ØB C D E3 3 5 7.98 6.85 14.83
4 4 6 8.48 7.35 15.83
5 5 7 8.98 7.85 16.83
6 6 8 9.48 8.35 17.83
7 7 9 9.98 8.85 18.83
8 8 10 10.48 9.35 19.83
9 9 11 10.98 9.85 20.83
10 10 12 11.48 10.35 21.83
12 12 14 12.48 11.35 23.83
Ø3‘‘-Ø12‘‘
A
E -
2.19
D
C
E
4.3
0
B
A
4.3
0
1.60
4.30
B
90.0°
maledw-gv
femalesw-gv
malesw-gv
femaledw-gv
femaledw-gv
n
M 1:10 (Ø6)
gasket
Ø 3 4 5 6 7 8 9 10 12A 3 4 5 6 7 8 9 10 12B 5 6 7 8 9 10 11 12 14C 7.98 8.48 8.98 9.48 9.98 10.48 10.98 11.48 12.48D 6.85 7.35 7.85 8.35 8.85 9.35 9.85 10.35 11.35E 14.83 15.83 16.83 17.83 18.83 19.83 20.83 21.83 23.83n 4lb 3.40 4.34 5.36 6.46 7.64 8.90 10.24 11.67 14.76
1 2 3 4
A
B
C
D
E
F
© je
rem
ias
Gm
bH. A
ll rig
hts
rese
rved
, als
o re
gard
ing
any
disp
osal
, exp
loita
tion,
edi
ting,
dis
tribu
tion,
as
wel
l as
in th
e ev
ent o
f app
licat
ions
for i
ndus
trial
pro
perty
righ
ts.
description
code
drawing no.
1 of 1
format
scale
sheet
USLETTER90° Elbow for Support
DWGVØ-90ES
1:5inch / lb
modified by
approved by
revisions-no.
namedate
checked by
drawn by
surface:inside/outside
material:inside/outside
UL-no.
5/31/2018 DAR
Works with SBP. Includes Locking Band with gear Clamp.
Elbow 90° with support leg / DWGVØ-90ES
Ø ØA ØB C D E13 13 15.5 14.43 13.3 27.73
14 14 16.5 14.93 13.8 28.73
16 16 18.5 15.93 14.8 30.73
18 18 20.5 16.94 15.8 32.74
20 20 22.5 17.94 16.8 34.74
22 22 24.5 18.94 17.8 36.74
24 24 26.5 19.94 18.8 38.74
Works with SBP.
Ø13‘‘-Ø24‘‘
ØBØA
C
D
ØA
ØB
5.50
E
5.50
5.50
1.60
90.0°
23
DWGV PRODUCTS
SUPPORTS
Ø ØA ØB C D E3 3 5 7.81 6.58 14.81
4 4 6 8.29 7.08 15.81
5 5 7 8.76 7.58 16.82
6 6 8 9.23 8.09 17.82
7 7 9 9.71 8.59 18.82
8 8 10 10.18 9.09 19.82
9 9 11 10.66 9.59 20.82
10 10 12 11.13 10.09 21.82
12 12 14 12.08 11.10 23.82
Elbow 87° with support leg / DWGVØ-87ES
Works with SBP. Includes Locking Band with gear Clamp.
Ø3‘‘-Ø12‘‘
A
E -
2.19
D
C
E
4.3
0
B
A
4.3
0
1.60
4.30
B maledw-gv
femalesw-gv
malesw-gv
femaledw-gv
femaledw-gv
n
M 1:8 (Ø6)
gasket
Ø 3 4 5 6 7 8 9 10 12A 3 4 5 6 7 8 9 10 12B 5 6 7 8 9 10 11 12 14C 7.81 8.29 8.76 9.23 9.71 10.18 10.66 11.13 12.08D 6.58 7.08 7.58 8.09 8.59 9.09 9.59 10.09 11.1E 14.81 15.81 16.81 17.82 18.82 19.82 20.82 21.82 23.82n 4lb 3.38 4.30 5.31 6.39 7.56 8.80 10.12 11.52 14.56
1 2 3 4
A
B
C
D
E
F
© je
rem
ias
Gm
bH. A
ll rig
hts
rese
rved
, als
o re
gard
ing
any
disp
osal
, exp
loita
tion,
edi
ting,
dis
tribu
tion,
as
wel
l as
in th
e ev
ent o
f app
licat
ions
for i
ndus
trial
pro
perty
righ
ts.
description
code
drawing no.
1 of 1
format
scale
sheet
USLETTER87° Elbow for Support
DWGVØ-87ES
1:5inch / lb
modified by
approved by
revisions-no.
namedate
checked by
drawn by
surface:inside/outside
material:inside/outside
UL-no.
5/30/2018 DAR
Ø ØA ØB C D E13 13 15.5 13.99 12.99 27.72
14 14 16.5 14.46 13.49 28.73
16 16 18.5 15.41 14.49 30.73
18 18 20.5 16.36 15.5 32.74
20 20 22.5 17.31 16.51 34.74
22 22 24.5 18.25 17.51 36.75
24 24 26.5 19.2 18.51 38.75
Elbow 87° with support leg / DWGVØ-87ES
Works with SBP.
Ø13‘‘-Ø24‘‘
ØBØA
C
D
ØA
ØB
5.50
E
5.50
5.50
1.60
87.0°
24
Ø ØA ØB3 3 5
4 4 6
5 5 7
6 6 8
7 7 9
8 8 10
9 9 11
10 10 12
12 12 14
9“ Fixed Length / DWGVØ-9L
Ø ØA ØB3 3 54 4 65 5 76 6 87 7 98 8 109 9 1110 10 1212 12 1413 13 15.514 14 16.516 16 18.518 18 20.520 20 22.522 22 24.524 24 26.526 26 28.528 28 30.530 30 32.532 32 34.534 34 36.536 36 38.5
12“ Fixed Length / DWGVØ-12L
Ø3‘‘-Ø12‘‘ Ø13‘‘-Ø36‘‘
B
6.8
1
A
9.0
0
1.0
0
malesw-gv
femalesw-gv
maledw-gv
femaledw-gv
n
gasket
M 1:5 (Ø6)
Ø 3 4 5 6 7 8 9 10 12A 3 4 5 6 7 8 9 10 12B 5 6 7 8 9 10 11 12 14n 4lb 1.58 1.92 2.26 2.61 2.95 3.29 3.63 3.97 4.65
1 2 3 4
A
B
C
D
E
F
© je
rem
ias
Gm
bH. A
ll rig
hts
rese
rved
, als
o re
gard
ing
any
disp
osal
, exp
loita
tion,
edi
ting,
dis
tribu
tion,
as
wel
l as
in th
e ev
ent o
f app
licat
ions
for i
ndus
trial
pro
perty
righ
ts.
description
code
drawing no.
1 of 1
format
scale
sheet
USLETTER9" Fixed Length
DWGVØ-9L
1:4inch / lb
modified by
approved by
revisions-no.
namedate
checked by
drawn by
surface:inside/outside
material:inside/outside
UL-no.
5/17/2018 DAR
B
9.8
1
A
12.
00
1.0
0
malesw-gv
femalesw-gv
maledw-gv
femaledw-gv
n
M 1:6 (Ø6)
gasket
Ø 3 4 5 6 7 8 9 10 12A 3 4 5 6 7 8 9 10 12B 5 6 7 8 9 10 11 12 14n 4lb 2.02 2.47 2.92 3.37 3.81 4.26 4.71 5.16 6.05
1 2 3 4
A
B
C
D
E
F
© je
rem
ias
Gm
bH. A
ll rig
hts
rese
rved
, als
o re
gard
ing
any
disp
osal
, exp
loita
tion,
edi
ting,
dis
tribu
tion,
as
wel
l as
in th
e ev
ent o
f app
licat
ions
for i
ndus
trial
pro
perty
righ
ts.
description
code
drawing no.
1 of 1
format
scale
sheet
USLETTER12" Fixed Length
DWGVØ-12L
1:4inch / lb
modified by
approved by
revisions-no.
namedate
checked by
drawn by
surface:inside/outside
material:inside/outside
UL-no.
5/17/2018 DAR
DWGV PRODUCTS
STRAIGHT LENGTHS
* - Installed lengths. Includes Locking Band with gear Clamp. * - Installed lengths. Includes Locking Band with gear Clamp.
ØA
ØB
10.7
5
12.0
0
2.4
8
Ø13‘‘-Ø36‘‘
Ø3‘‘-Ø12‘‘
25
DWGV PRODUCTS
Ø ØA ØB3 3 54 4 65 5 76 6 87 7 98 8 109 9 1110 10 1212 12 1413 13 15.514 14 16.516 16 18.518 18 20.520 20 22.522 22 24.524 24 26.526 26 28.528 28 30.530 30 32.532 32 34.534 34 36.536 36 38.5
18“ Fixed Length/ DWGVØ-18L
Ø ØA ØB3 3 54 4 65 5 76 6 87 7 98 8 109 9 1110 10 1212 12 1413 13 15.514 14 16.516 16 18.518 18 20.520 20 22.522 22 24.524 24 26.526 26 28.528 28 30.530 30 32.532 32 34.534 34 36.536 36 38.5
24“ Fixed Length / DWGVØ-24L
STRAIGHT LENGTHS
Ø3‘‘-Ø12‘‘ Ø13‘‘-Ø36‘‘ Ø3‘‘-Ø12‘‘ Ø13‘‘-Ø36‘‘
B
15.
81
A
18.
00
1.0
0
malesw-gv
femalesw-gv
maledw-gv
femaledw-gv
n
M 1:6 (Ø6)
gasket
Ø 3 4 5 6 7 8 9 10 12A 3 4 5 6 7 8 9 10 12B 5 6 7 8 9 10 11 12 14n 4lb 2.90 3.56 4.22 4.89 5.55 6.21 6.88 7.54 8.86
1 2 3 4
A
B
C
D
E
F
© je
rem
ias
Gm
bH. A
ll rig
hts
rese
rved
, als
o re
gard
ing
any
disp
osal
, exp
loita
tion,
edi
ting,
dis
tribu
tion,
as
wel
l as
in th
e ev
ent o
f app
licat
ions
for i
ndus
trial
pro
perty
righ
ts.
description
code
drawing no.
1 of 1
format
scale
sheet
USLETTER18" Fixed Length
DWGVØ-18L
1:4inch / lb
modified by
approved by
revisions-no.
namedate
checked by
drawn by
surface:inside/outside
material:inside/outside
UL-no.
5/17/2018 DAR
B
21.
81
A
24.
00
1.0
0
malesw-gv
femalesw-gvmaledw-gv
femaledw-gv
n
M 1:8 (Ø6)
gasket
Ø 3 4 5 6 7 8 9 10 12A 3 4 5 6 7 8 9 10 12B 5 6 7 8 9 10 11 12 14n 4lb 3.78 4.65 5.53 6.41 7.29 8.16 9.04 9.92 11.67
1 2 3 4
A
B
C
D
E
F
© je
rem
ias
Gm
bH. A
ll rig
hts
rese
rved
, als
o re
gard
ing
any
disp
osal
, exp
loita
tion,
edi
ting,
dis
tribu
tion,
as
wel
l as
in th
e ev
ent o
f app
licat
ions
for i
ndus
trial
pro
perty
righ
ts.
description
code
drawing no.
1 of 1
format
scale
sheet
USLETTER24" Fixed Length
DWGVØ-24L
1:6inch / lb
modified by
approved by
revisions-no.
namedate
checked by
drawn by
surface:inside/outside
material:inside/outside
UL-no.
5/17/2018 DAR
* - Installed lengths. Includes Locking Band with gear Clamp. * - Installed lengths. Includes Locking Band with gear Clamp.
2.4
8
ØA
ØB
18.0
0
16.7
5
ØA
ØB
2.4
8
36.0
0
34.7
5
26
DWGV PRODUCTS
STRAIGHT LENGTHS
Ø ØA ØB3 3 54 4 65 5 76 6 87 7 98 8 109 9 1110 10 1212 12 1413 13 15.514 14 16.516 16 18.518 18 20.520 20 22.522 22 24.524 24 26.526 26 28.528 28 30.530 30 32.532 32 34.534 34 36.536 36 38.5
30“ Fixed Length / DWGVØ-30L 36“ Fixed Length / DWGVØ-36L
Ø3‘‘-Ø12‘‘ Ø13‘‘-Ø36‘‘
Ø ØA ØB3 3 54 4 65 5 76 6 87 7 98 8 109 9 1110 10 1212 12 1413 13 15.514 14 16.516 16 18.518 18 20.520 20 22.522 22 24.524 24 26.526 26 28.528 28 30.530 30 32.532 32 34.534 34 36.536 36 38.5
Ø3‘‘-Ø12‘‘ Ø13‘‘-Ø36‘‘
B
27.
81
A
30.
00
1.0
0
malesw-gv
femalesw-gv
maledw-gv
femaledw-gv
n
M 1:10 (Ø6)
gasket
Ø 3 4 5 6 7 8 9 10 12A 3 4 5 6 7 8 9 10 12B 5 6 7 8 9 10 11 12 14n 4lb 4.65 5.74 6.84 7.93 9.02 10.11 11.21 12.30 14.48
1 2 3 4
A
B
C
D
E
F
© je
rem
ias
Gm
bH. A
ll rig
hts
rese
rved
, als
o re
gard
ing
any
disp
osal
, exp
loita
tion,
edi
ting,
dis
tribu
tion,
as
wel
l as
in th
e ev
ent o
f app
licat
ions
for i
ndus
trial
pro
perty
righ
ts.
description
code
drawing no.
1 of 1
format
scale
sheet
USLETTER30" Fixed Length
DWGVØ-30L
1:7inch / lb
modified by
approved by
revisions-no.
namedate
checked by
drawn by
surface:inside/outside
material:inside/outside
UL-no.
5/17/2018 DAR
B
33.
81
A
36.
00
1.0
0
malesw-gv
femalesw-gv
maledw-gv
femaledw-gv
n
M 1:12 (Ø6)
gasket
Ø 3 4 5 6 7 8 9 10 12A 3 4 5 6 7 8 9 10 12B 5 6 7 8 9 10 11 12 14n 4lb 5.53 6.84 8.14 9.45 10.76 12.06 13.37 14.68 17.29
1 2 3 4
A
B
C
D
E
F
© je
rem
ias
Gm
bH. A
ll rig
hts
rese
rved
, als
o re
gard
ing
any
disp
osal
, exp
loita
tion,
edi
ting,
dis
tribu
tion,
as
wel
l as
in th
e ev
ent o
f app
licat
ions
for i
ndus
trial
pro
perty
righ
ts.
description
code
drawing no.
1 of 1
format
scale
sheet
USLETTER36" Fixed Length
DWGVØ-36L
1:8inch / lb
modified by
approved by
revisions-no.
namedate
checked by
drawn by
surface:inside/outside
material:inside/outside
UL-no.
5/17/2018 DAR
* - Installed lengths. Includes Locking Band with gear Clamp. * - Installed lengths. Includes Locking Band with gear Clamp.
ØA
ØB
2.4
8
30.0
028
.75
ØA
ØB
2.4
8
36.0
0
34.7
5
27
42“ Fixed Length / DWGVØ-42L 48“ Fixed Length / DWGVØ-48L
Ø ØA ØB3 3 54 4 65 5 76 6 87 7 98 8 109 9 1110 10 1212 12 1413 13 15.514 14 16.516 16 18.518 18 20.520 20 22.522 22 24.524 24 26.526 26 28.528 28 30.530 30 32.532 32 34.534 34 36.536 36 38.5
Ø ØA ØB3 3 54 4 65 5 76 6 87 7 98 8 109 9 1110 10 1212 12 1413 13 15.514 14 16.516 16 18.518 18 20.520 20 22.522 22 24.524 24 26.526 26 28.528 28 30.530 30 32.532 32 34.534 34 36.536 36 38.5
Ø3‘‘-Ø12‘‘ Ø13‘‘-Ø36‘‘ Ø3‘‘-Ø12‘‘ Ø13‘‘-Ø36‘‘
B
39.
81
A
42.
00
1.0
0
malesw-gv
femalesw-gv
maledw-gv
femaledw-gv
n
M 1:12 (Ø6)
gasket
Ø 4 5 6 7 8 9 10 12A 4 5 6 7 8 9 10 12B 6 7 8 9 10 11 12 14n 4lb 7.93 9.45 10.97 12.49 14.01 15.54 17.06 20.10
1 2 3 4
A
B
C
D
E
F
© je
rem
ias
Gm
bH. A
ll rig
hts
rese
rved
, als
o re
gard
ing
any
disp
osal
, exp
loita
tion,
edi
ting,
dis
tribu
tion,
as
wel
l as
in th
e ev
ent o
f app
licat
ions
for i
ndus
trial
pro
perty
righ
ts.
description
code
drawing no.
1 of 1
format
scale
sheet
USLETTER42" Fixed Length
DWGVØ-42L
1:8inch / lb
modified by
approved by
revisions-no.
namedate
checked by
drawn by
surface:inside/outside
material:inside/outside
UL-no.
5/17/2018 DAR
B
45.
81
A
48.
00
1.0
0
malesw-gv
femalesw-gvmaledw-gv
femaledw-gv
n
M 1:14 (Ø6)
gasket
Ø 4 5 6 7 8 9 10 12A 4 5 6 7 8 9 10 12B 6 7 8 9 10 11 12 14n 4lb 9.02 10.75 12.49 14.23 15.96 17.70 19.44 22.91
1 2 3 4
A
B
C
D
E
F
© je
rem
ias
Gm
bH. A
ll rig
hts
rese
rved
, als
o re
gard
ing
any
disp
osal
, exp
loita
tion,
edi
ting,
dis
tribu
tion,
as
wel
l as
in th
e ev
ent o
f app
licat
ions
for i
ndus
trial
pro
perty
righ
ts.
description
code
drawing no.
1 of 1
format
scale
sheet
USLETTER48" Fixed Length
DWGVØ-48L
1:10inch / lb
modified by
approved by
revisions-no.
namedate
checked by
drawn by
surface:inside/outside
material:inside/outside
UL-no.
5/17/2018 DAR
* - Installed lengths. Includes Locking Band with gear Clamp. * - Installed lengths. Includes Locking Band with gear Clamp.
DWGV PRODUCTS
STRAIGHT LENGTHS
ØA
ØB
2.4
8
42.
00
40
.75
ØA
ØB
2.4
8
48
.00
46
.75
28
ADJUSTABLE LENGTHS
DWGV PRODUCTS
Ø ØA ØB3 3 5
4 4 6
5 5 7
6 6 8
7 7 9
8 8 10
9 9 11
10 10 12
12 12 14
18“ Cut Pipe Length / DWGVØ-18CL
Ø ØA ØB3 3 5
4 4 6
5 5 7
6 6 8
7 7 9
8 8 10
9 9 11
10 10 12
12 12 14
30“ Cut Pipe Length / DWGVØ-30CL
* - Installed lengths. Includes Locking Band with gear Clamp. * - Installed lengths. Includes Locking Band with gear Clamp.
29
24“ Adjustable Length / DWGVØ-24AL
Includes Locking Band with gear Clamp.
Ø ØA ØB13 13 15.5
14 14 16.5
16 16 18.5
18 18 20.5
20 20 22.5
22 22 24.5
24 24 26.5
26 26 28.5
28 28 30.5
30 30 32.5
32 32 34.5
34 34 36.5
36 36 38.5
6 x 0.33
B
29.
85
3.3
0
22.
75 m
ax. -
6.7
5 m
in.
24.
00 m
ax. -
8.0
0 m
in.
A - 0.2"
femalesw-fl
M 1:12 (Ø6)
Ø 5 6 7 8 9 10 11 12 13 14 16 18 20 22 24 26 28 30 32 34 36A 5 6 7 8 9 10 11 12 13 14 16 18 20 22 24 26 28 30 32 34 36B 7.5 8.5 9.5 10.5 11.5 12.5 13.5 14.5 15.5 16.5 18.5 20.5 22.5 24.5 26.5 28.5 30.5 32.5 34.5 36.5 38.5lb 15.66 17.95 20.24 22.53 24.82 27.11 29.40 31.69 33.98 36.27 40.85 51.40 56.52 61.64 66.76 71.88 77.00 82.12 87.24 92.36 97.48
1 2 3 4
A
B
C
D
E
F
© je
rem
ias
Gm
bH. A
ll rig
hts
rese
rved
, als
o re
gard
ing
any
disp
osal
, exp
loita
tion,
edi
ting,
dis
tribu
tion,
as
wel
l as
in th
e ev
ent o
f app
licat
ions
for i
ndus
trial
pro
perty
righ
ts.
description
code
drawing no.
1 of 1
format
scale
sheet
USLETTER24" Adjustable Length
DWFLØ-24AL+1
1:6inch / lb
modified by
approved by
revisions-no.
namedate
checked by
drawn by
surface:inside/outside
material:inside/outside
UL-no.
10/30/2018 DAR
ADJUSTABLE LENGTHS
DWGV PRODUCTS
24“ Adjustable Length / DWGVØ-24AL
Includes Locking Band with gear Clamp.
6 x 0.33
B
29.
85
3.3
0
22.
75 m
ax. -
6.7
5 m
in.
24.
00 m
ax. -
8.0
0 m
in.
A - 0.2"
femalesw-fl
M 1:12 (Ø6)
Ø 5 6 7 8 9 10 11 12 13 14 16 18 20 22 24 26 28 30 32 34 36A 5 6 7 8 9 10 11 12 13 14 16 18 20 22 24 26 28 30 32 34 36B 7.5 8.5 9.5 10.5 11.5 12.5 13.5 14.5 15.5 16.5 18.5 20.5 22.5 24.5 26.5 28.5 30.5 32.5 34.5 36.5 38.5lb 15.66 17.95 20.24 22.53 24.82 27.11 29.40 31.69 33.98 36.27 40.85 51.40 56.52 61.64 66.76 71.88 77.00 82.12 87.24 92.36 97.48
1 2 3 4
A
B
C
D
E
F
© je
rem
ias
Gm
bH. A
ll rig
hts
rese
rved
, als
o re
gard
ing
any
disp
osal
, exp
loita
tion,
edi
ting,
dis
tribu
tion,
as
wel
l as
in th
e ev
ent o
f app
licat
ions
for i
ndus
trial
pro
perty
righ
ts.
description
code
drawing no.
1 of 1
format
scale
sheet
USLETTER24" Adjustable Length
DWFLØ-24AL+1
1:6inch / lb
modified by
approved by
revisions-no.
namedate
checked by
drawn by
surface:inside/outside
material:inside/outside
UL-no.
10/30/2018 DAR
Ø ØA ØB3 3 5
4 4 6
5 5 7
6 6 8
7 7 9
8 8 10
9 9 11
10 10 12
12 12 14
30
ADJUSTABLE LENGTHS
DWGV PRODUCTS
24“ Adjustable Lenght w/ Gasket / DWGVØ-24ALG
Includes Locking Band with gear Clamp.
Ø ØA ØB13 13 15.5
14 14 16.5
16 16 18.5
18 18 20.5
20 20 22.5
22 22 24.5
24 24 26.5
26 26 28.5
28 28 30.5
30 30 32.5
32 32 34.5
34 34 36.5
36 36 38.5
6 x 0.33
B
29.
85
3.3
0 2
2.75
max
. - 6
.75
min
.
24.
00 m
ax. -
8.0
0 m
in.
A - 0.2"
femalesw-fl
M 1:12 (Ø6)
Ø 5 6 7 8 9 10 11 12 13 14 16 18 20 22 24 26 28 30 32 34 36A 5 6 7 8 9 10 11 12 13 14 16 18 20 22 24 26 28 30 32 34 36B 7.5 8.5 9.5 10.5 11.5 12.5 13.5 14.5 15.5 16.5 18.5 20.5 22.5 24.5 26.5 28.5 30.5 32.5 34.5 36.5 38.5lb 17.44 19.94 22.43 24.92 27.41 29.91 32.40 34.89 37.39 39.88 44.87 49.86 54.84 59.83 64.82 77.94 83.46 88.99 94.52 100.05 105.58
1 2 3 4
A
B
C
D
E
F
© je
rem
ias
Gm
bH. A
ll rig
hts
rese
rved
, als
o re
gard
ing
any
disp
osal
, exp
loita
tion,
edi
ting,
dis
tribu
tion,
as
wel
l as
in th
e ev
ent o
f app
licat
ions
for i
ndus
trial
pro
perty
righ
ts.
description
code
drawing no.
1 of 1
format
scale
sheet
USLETTER24" Adjustable Length with Graphite
Packing
DWFLØ-24ALG+1
1:6inch / lb
modified by
approved by
revisions-no.
namedate
checked by
drawn by
surface:inside/outside
material:inside/outside
UL-no.
10/29/2018 DAR
31
ELBOWS
30° Elbow / DWGVØ-30EL
Ø ØA ØB C D3 3 5 7 0.634 4 6 7.13 0.655 5 7 7.26 0.676 6 8 7.39 0.687 7 9 7.52 0.78 8 10 7.65 0.729 9 11 7.78 0.7410 10 12 7.91 0.7512 12 14 8.17 0.7913 13 15.5 12.83 1.6914 14 16.5 12.96 1.7116 16 18.5 13.22 1.7418 18 20.5 13.48 1.7720 20 22.5 13.74 1.8122 22 24.5 14 1.8424 24 26.5 14.26 1.8826 26 28.5 14.51 1.9128 28 30.5 14.77 1.9530 30 32.5 15.03 1.9832 32 34.5 15.29 2.0134 34 36.5 15.55 2.0536 36 38.5 15.81 2.08
15° Elbow / DWGVØ-15EL
Includes Locking Band with gear Clamp
Ø ØA ØB C D3 3 5 7.41 1.44 4 6 7.66 1.475 5 7 7.91 1.536 6 8 8.16 1.67 7 9 8.41 1.678 8 10 8.66 1.739 9 11 8.91 1.810 10 12 9.16 1.8712 12 14 9.66 213 13 15.5 14.16 3.7914 14 16.5 14.41 3.8616 16 18.5 14.91 418 18 20.5 15.42 4.1320 20 22.5 15.92 4.2622 22 24.5 16.42 4.424 24 26.5 16.92 4.5326 26 28.5 17.42 4.6728 28 30.5 17.92 4.830 30 32.5 18.42 4.9332 32 34.5 18.92 5.0734 34 36.5 19.42 5.236 36 38.5 19.92 5.34
Ø3‘‘-Ø12‘‘ Ø13‘‘-Ø36‘‘Ø3‘‘-Ø12‘‘ Ø13‘‘-Ø36‘‘
4.3
0 C
D
15.0°
4.3
0
B
A
1.0
0
malesw-gv
femaledw-gv
femalesw-gv
maledw-gv
n
M 1:6 (Ø6)
gasket
Ø 3 4 5 6 7 8 9 10 12A 3 4 5 6 7 8 9 10 12B 5 6 7 8 9 10 11 12 14C 7 7.13 7.26 7.39 7.52 7.65 7.78 7.91 8.17D 0.63 0.65 0.67 0.68 0.7 0.72 0.74 0.75 0.79n 4lb 1.62 2.00 2.38 2.77 3.18 3.59 4.01 4.44 5.33
1 2 3 4
A
B
C
D
E
F
© je
rem
ias
Gm
bH. A
ll rig
hts
rese
rved
, als
o re
gard
ing
any
disp
osal
, exp
loita
tion,
edi
ting,
dis
tribu
tion,
as
wel
l as
in th
e ev
ent o
f app
licat
ions
for i
ndus
trial
pro
perty
righ
ts.
description
code
drawing no.
1 of 1
format
scale
sheet
USLETTER15° Elbow
DWGVØ-15EL
1:4inch / lb
modified by
approved by
revisions-no.
namedate
checked by
drawn by
surface:inside/outside
material:inside/outside
UL-no.
5/15/2018 DAR
4.3
0
C
D
30.0°
4.3
0
B
A
1.0
0
malesw-gv
femaledw-gv
femalesw-gv
maledw-gv
n
M 1:10 (Ø6)
gasket
Ø 3 4 5 6 7 8 9 10 12A 3 4 5 6 7 8 9 10 12B 5 6 7 8 9 10 11 12 14C 7.41 7.66 7.91 8.16 8.41 8.66 8.91 9.16 9.66D 1.4 1.47 1.53 1.6 1.67 1.73 1.8 1.87 2n 4lb 1.72 2.15 2.59 3.05 3.54 4.04 4.56 5.10 6.23
1 2 3 4
A
B
C
D
E
F
© je
rem
ias
Gm
bH. A
ll rig
hts
rese
rved
, als
o re
gard
ing
any
disp
osal
, exp
loita
tion,
edi
ting,
dis
tribu
tion,
as
wel
l as
in th
e ev
ent o
f app
licat
ions
for i
ndus
trial
pro
perty
righ
ts.
description
code
drawing no.
1 of 1
format
scale
sheet
USLETTER30° Elbow
DWGVØ-30EL
1:4inch / lb
modified by
approved by
revisions-no.
namedate
checked by
drawn by
surface:inside/outside
material:inside/outside
UL-no.
5/17/2018 DAR
Includes Locking Band with gear Clamp
DWGV PRODUCTS
1.25
2.4
8
ØA
5.50
C
5.50
15.0°
DØB
Ø3‘‘-Ø12‘‘
Ø13‘‘-Ø36‘‘
Ø3‘‘-Ø12‘‘
Ø13‘‘-Ø36‘‘
D
ØB30.0°5.
50
C
5.50
1.25
2.4
8
ØA
32
45° Elbow / DWGVØ-45EL 87° Elbow / DWGVØ-87EL
Includes Locking Band with gear Clamp Includes Locking Band with gear Clamp
Ø ØA ØB C D3 3 5 7.6 2.244 4 6 7.95 2.395 5 7 8.3 2.536 6 8 8.66 2.687 7 9 9.01 2.838 8 10 9.37 2.979 9 11 9.72 3.1210 10 12 10.07 3.2712 12 14 10.78 3.5613 13 15.5 14.9 6.1714 14 16.5 15.26 6.3216 16 18.5 15.97 6.6118 18 20.5 16.68 6.9120 20 22.5 17.38 7.222 22 24.5 18.09 7.4924 24 26.5 18.8 7.7926 26 28.5 19.5 8.0828 28 30.5 20.21 8.3730 30 32.5 20.92 8.6632 32 34.5 21.63 8.9634 34 36.5 22.33 9.2536 36 38.5 23.04 9.54
Ø ØA ØB C D3 3 5 8.12 5.63
4 4 6 8.62 6.1
5 5 7 9.12 6.58
6 6 8 9.62 7.05
7 7 9 10.12 7.52
8 8 10 10.62 8
9 9 11 11.11 8.47
10 10 12 11.61 8.95
12 12 14 12.61 9.89
Ø3‘‘-Ø12‘‘ Ø13‘‘-Ø36‘‘ Ø3‘‘-Ø12‘‘ C
D
45.0°
4.30
4.3
0
B
A
1.00
malesw-gv
femaledw-gv
femalesw-gvmaledw-gv
n
M 1:10 (Ø6)
gasket
Ø 3 4 5 6 7 8 9 10 12A 3 4 5 6 7 8 9 10 12B 5 6 7 8 9 10 11 12 14C 7.6 7.95 8.3 8.66 9.01 9.37 9.72 10.07 10.78D 2.24 2.39 2.53 2.68 2.83 2.97 3.12 3.27 3.56n 4lb 1.83 2.31 2.82 3.35 3.92 4.52 5.14 5.80 7.20
1 2 3 4
A
B
C
D
E
F
© je
rem
ias
Gm
bH. A
ll rig
hts
rese
rved
, als
o re
gard
ing
any
disp
osal
, exp
loita
tion,
edi
ting,
dis
tribu
tion,
as
wel
l as
in th
e ev
ent o
f app
licat
ions
for i
ndus
trial
pro
perty
righ
ts.
description
code
drawing no.
1 of 1
format
scale
sheet
USLETTER45° Elbow
DWGVØ-45EL
1:4inch / lb
modified by
approved by
revisions-no.
namedate
checked by
drawn by
surface:inside/outside
material:inside/outside
UL-no.
5/17/2018 DAR
D
C
87.0°
4.30
1.60
4.3
0
B
A femaledw-gv
maledw-gv
malesw-gv
femalesw-gv
n
M 1:8 (Ø6)
gasket
Ø 3 4 5 6 7 8 9 10 12A 3 4 5 6 7 8 9 10 12B 5 6 7 8 9 10 11 12 14C 8.12 8.62 9.12 9.62 10.12 10.62 11.11 11.61 12.61D 5.63 6.1 6.58 7.05 7.52 8 8.47 8.95 9.89n 4lb 2.27 2.95 3.68 4.47 5.31 6.22 7.18 8.19 10.40
1 2 3 4
A
B
C
D
E
F
© je
rem
ias
Gm
bH. A
ll rig
hts
rese
rved
, als
o re
gard
ing
any
disp
osal
, exp
loita
tion,
edi
ting,
dis
tribu
tion,
as
wel
l as
in th
e ev
ent o
f app
licat
ions
for i
ndus
trial
pro
perty
righ
ts.
description
code
drawing no.
1 of 1
format
scale
sheet
USLETTER87° Elbow
DWGVØ-87EL
1:4inch / lb
modified by
approved by
revisions-no.
namedate
checked by
drawn by
surface:inside/outside
material:inside/outside
UL-no.
5/17/2018 DAR
ELBOWS
DWGV PRODUCTS
ØA
5.50
5.50
C
1.25
2.4
8
D
ØB
45.0°
Ø3‘‘-Ø12‘‘
Ø13‘‘-Ø36‘‘
33
ELBOWS
DWGV PRODUCTS
90° Elbow/ DWGVØ-90EL
Includes Locking Band with gear Clamp
Ø ØA ØB C D3 3 5 7.98 5.84 4 6 8.48 6.35 5 7 8.98 6.86 6 8 9.48 7.37 7 9 9.98 7.88 8 10 10.48 8.39 9 11 10.98 8.810 10 12 11.48 9.312 12 14 12.48 10.3
Ø3‘‘-Ø12‘‘
4.30
B
D
C
90.0°
1.60
4.3
0
A
1.00
femaledw-gv
maledw-gv
malesw-gv
femalesw-gv n
M 1:8 (Ø6)
gasket
Ø 3 4 5 6 7 8 9 10 12A 3 4 5 6 7 8 9 10 12B 5 6 7 8 9 10 11 12 14C 7.98 8.48 8.98 9.48 9.98 10.48 10.98 11.48 12.48D 5.8 6.3 6.8 7.3 7.8 8.3 8.8 9.3 10.3n 4lb 2.38 3.06 3.81 4.61 5.47 6.40 7.38 8.42 10.68
1 2 3 4
A
B
C
D
E
F
© je
rem
ias
Gm
bH. A
ll rig
hts
rese
rved
, als
o re
gard
ing
any
disp
osal
, exp
loita
tion,
edi
ting,
dis
tribu
tion,
as
wel
l as
in th
e ev
ent o
f app
licat
ions
for i
ndus
trial
pro
perty
righ
ts.
description
code
drawing no.
1 of 1
format
scale
sheet
USLETTER90° Elbow
DWGVØ-90EL
1:5inch / lb
modified by
approved by
revisions-no.
namedate
checked by
drawn by
surface:inside/outside
material:inside/outside
UL-no.
5/17/2018 DAR
87° Elbow / DWGVØ-87EL
Includes Locking Band with gear Clamp
Ø ØA ØB C D13 13 15.5 14.73 13.97
14 14 16.5 15.22 14.45
16 16 18.5 16.22 15.4
18 18 20.5 17.22 16.34
20 20 22.5 18.22 17.29
22 22 24.5 19.22 18.24
24 24 26.5 20.22 19.19
26 26 28.5 21.22 20.13
28 28 30.5 22.21 21.08
30 30 32.5 23.21 22.03
32 32 34.5 24.21 22.98
34 34 36.5 25.21 23.92
36 36 38.5 26.21 24.87
Ø13‘‘-Ø36‘‘
D
ØB
C
5.50
1.25
2.4
85.50
ØA
1.60
87.0°
34
ELBOWS
DWGV PRODUCTS
90° Elbow/ DWGVØ-90EL
Includes Locking Band with gear Clamp
Ø ØA ØB C D13 13 15.5 14.42 14.4214 14 16.5 14.92 14.9216 16 18.5 15.92 15.9218 18 20.5 16.92 16.9220 20 22.5 17.92 17.9222 22 24.5 18.92 18.9224 24 26.5 19.92 19.9226 26 28.5 20.92 20.9228 28 30.5 21.92 21.9230 30 32.5 22.92 22.9232 32 34.5 23.92 23.9234 34 36.5 24.92 24.9236 36 38.5 25.92 25.92
Ø13‘‘-Ø36‘‘
ØB
C
5.50
ØA
1.25
5.50
2.4
8
90.0° D
1.60
35
DWGV PRODUCTS
TEES
Ø ØA ØB C D E F3 3 5 7.40 3.06 10.46 15.82
4 4 6 8.25 3.42 11.67 17.23
5 5 7 9.10 3.77 12.87 18.64
6 6 8 9.96 4.12 14.08 20.06
7 7 9 10.81 4.48 15.29 21.47
8 8 10 11.66 4.83 16.49 22.89
9 9 11 12.52 5.18 17.70 24.30
10 10 12 13.37 5.54 18.91 25.72
12 12 14 15.08 6.25 21.32 28.54
45° Tee / DWGVØ-45T
Ø3‘‘-Ø12‘‘
B
4.3
0
4.3
0
C
B
F
F -
2.19
E
D
A
45.0°
A
4.30
1.0
0
femalesw-gv
malesw-gv
malesw-gv
maledw-gv
femaledw-gv
femaledw-gv
n
gasket
M 1:10 (Ø6)
Ø 3 4 5 6 7 8 9 10 12A 3 4 5 6 7 8 9 10 12B 5 6 7 8 9 10 11 12 14C 7.4 8.25 9.1 9.96 10.81 11.66 12.52 13.37 15.08D 3.06 3.42 3.77 4.12 4.48 4.83 5.19 5.54 6.25E 10.46 11.67 12.87 14.08 15.29 16.5 17.7 18.91 21.32F 15.82 17.23 18.65 20.06 21.47 22.89 24.3 25.72 28.55n 4lb 4.68 6.14 7.76 9.54 11.45 13.53 15.76 18.18 23.38
1 2 3 4
A
B
C
D
E
F
© je
rem
ias
Gm
bH. A
ll rig
hts
rese
rved
, als
o re
gard
ing
any
disp
osal
, exp
loita
tion,
edi
ting,
dis
tribu
tion,
as
wel
l as
in th
e ev
ent o
f app
licat
ions
for i
ndus
trial
pro
perty
righ
ts.
description
code
drawing no.
1 of 1
format
scale
sheet
USLETTER45° Tee
DWGVØ-45T
1:6inch / lb
modified by
approved by
revisions-no.
namedate
checked by
drawn by
surface:inside/outside
material:inside/outside
UL-no.
5/17/2018 DAR
* - Installed lengths. Includes Locking Band with gear Clamp.
Ø ØA ØB C D E F13 13 15.5 17.18 7.12 24.3 34.28
14 14 16.5 18.04 7.47 25.51 35.69
16 16 18.5 19.74 8.18 27.92 38.52
18 18 20.5 21.45 8.89 30.34 41.35
20 20 22.5 23.16 9.59 32.75 44.18
22 22 24.5 24.86 10.3 35.16 47
24 24 26.5 26.57 11.01 37.58 49.83
26 26 28.5 28.99 11.71 39.99 52.66
28 28 30.5 29.99 12.42 42.41 55.49
30 30 32.5 31.69 13.13 44.82 58.32
32 32 34.5 33.4 13.83 47.24 61.15
34 34 36.5 35.11 14.54 49.65 63.97
36 36 38.5 36.81 15.25 52.06 66.8
45° Tee / DWGVØ-45T
Ø13‘‘-Ø36‘‘
* - Installed lengths. Includes Locking Band with gear Clamp.
ØA
5.50
5.50
ØA
2.4
8
C
E
F-1
.25
F
D
ØA
ØB5.
50
45.0°
36
45° Reduction Tee / DWGVØ-45TØ
Ø A ØB C D E F G H3 3 5
Co
sto
mer
Dim
ensi
on
Co
sto
mer
Dim
ensi
on
Co
sto
mer
Dim
ensi
on
Co
sto
mer
Dim
ensi
on
Co
sto
mer
Dim
ensi
on
Co
sto
mer
Dim
ensi
on
4 4 65 5 76 6 87 7 98 8 109 9 1110 10 1212 12 14
Ø3‘‘-Ø12‘‘
B
4.3
0
4.3
0
C
B
F
F -
2.19
E
D
A
45.0°
A
4.30
1.0
0
femalesw-gv
malesw-gv
malesw-gv
maledw-gv
femaledw-gv
femaledw-gv
n
gasket
M 1:10 (Ø6)
Ø 3 4 5 6 7 8 9 10 12A 3 4 5 6 7 8 9 10 12B 5 6 7 8 9 10 11 12 14C 7.4 8.25 9.1 9.96 10.81 11.66 12.52 13.37 15.08D 3.06 3.42 3.77 4.12 4.48 4.83 5.19 5.54 6.25E 10.46 11.67 12.87 14.08 15.29 16.5 17.7 18.91 21.32F 15.82 17.23 18.65 20.06 21.47 22.89 24.3 25.72 28.55n 4lb 4.68 6.14 7.76 9.54 11.45 13.53 15.76 18.18 23.38
1 2 3 4
A
B
C
D
E
F
© je
rem
ias
Gm
bH. A
ll rig
hts
rese
rved
, als
o re
gard
ing
any
disp
osal
, exp
loita
tion,
edi
ting,
dis
tribu
tion,
as
wel
l as
in th
e ev
ent o
f app
licat
ions
for i
ndus
trial
pro
perty
righ
ts.
description
code
drawing no.
1 of 1
format
scale
sheet
USLETTER45° Tee
DWGVØ-45T
1:6inch / lb
modified by
approved by
revisions-no.
namedate
checked by
drawn by
surface:inside/outside
material:inside/outside
UL-no.
5/17/2018 DAR
* - Installed lengths. Includes Locking Band with gear Clamp.
DWGV PRODUCTS
TEES
45° Reduction Tee / DWGVØ-45TØ
Ø A ØB C D E F G H13 13 15.5
Co
sto
mer
Dim
ensi
on
Co
sto
mer
Dim
ensi
on
Co
sto
mer
Dim
ensi
on
Co
sto
mer
Dim
ensi
on
Co
sto
mer
Dim
ensi
on
Co
sto
mer
Dim
ensi
on
14 14 16.516 16 18.518 18 20.520 20 22.522 22 24.524 24 26.526 26 28.528 28 30.530 30 32.532 32 34.534 34 36.536 36 38.5
Ø13‘‘-Ø36‘‘
* - Installed lengths. Includes Locking Band with gear Clamp.
ØB
ØA
E
F
2.4
8
ØC
ØD5.
50
5.50
GH
-1.2
5H
45.0°
37
DWGV PRODUCTS
TEES
Ø ØA ØB C D E F3 3 5 6.98 6.62 6.99 13.714 4 6 7.50 7.12 7.52 14.715 5 7 8.03 7.62 8.04 15.716 6 8 8.56 8.12 8.57 16.717 7 9 9.08 8.62 9.10 17.718 8 10 9.61 9.12 9.62 18.729 9 11 10.14 9.62 10.15 19.7210 10 12 10.66 10.12 10.68 20.7212 12 14 11.71 11.12 11.73 22.72
87° Tee / DWGVØ-87T
* - Installed lengths. Includes Locking Band with gear Clamp.
Ø3‘‘-Ø12‘‘
B
4.30
4.3
0
4.3
0
C
B
F
F -
2.19
E
D
A
87.0°
A
1.0
0 femalesw-gv
malesw-gv
malesw-gv
maledw-gv
femaledw-gv
femaledw-gv
n
gasket
M 1:10 (Ø6)
Ø 3 4 5 6 7 8 9 10 12A 3 4 5 6 7 8 9 10 12B 5 6 7 8 9 10 11 12 14C 6.98 7.51 8.03 8.56 9.08 9.61 10.14 10.66 11.71D 6.62 7.12 7.62 8.12 8.62 9.12 9.62 10.12 11.12E 6.99 7.52 8.04 8.57 9.1 9.62 10.15 10.68 11.73F 13.71 14.71 15.71 16.71 17.72 18.72 19.72 20.72 22.72n 4lb 3.85 4.92 6.07 7.30 8.61 9.99 11.46 13.04 16.35
1 2 3 4
A
B
C
D
E
F
© je
rem
ias
Gm
bH. A
ll rig
hts
rese
rved
, als
o re
gard
ing
any
disp
osal
, exp
loita
tion,
edi
ting,
dis
tribu
tion,
as
wel
l as
in th
e ev
ent o
f app
licat
ions
for i
ndus
trial
pro
perty
righ
ts.
description
code
drawing no.
1 of 1
format
scale
sheet
USLETTER87° Tee
DWGVØ-87T
1:5inch / lb
modified by
approved by
revisions-no.
namedate
checked by
drawn by
surface:inside/outside
material:inside/outside
UL-no.
5/17/2018 DAR
Ø ØA ØB C D E F13 13 15.5 13.69 12.99 13.71 27.8514 14 16.5 14.21 13.49 14.23 28.8516 16 18.5 15.27 14.49 15.29 30.8518 18 20.5 16.32 15.49 16.34 32.8520 20 22.5 17.37 16.48 17.39 34.8622 22 24.5 18.42 17.48 18.45 36.8624 24 26.5 19.48 18.48 19.5 38.8626 26 28.5 20.53 19.48 20.56 40.8628 28 30.5 21.58 20.48 21.61 42.8730 30 32.5 22.63 21.48 22.66 44.8732 32 34.5 23.68 22.48 23.72 46.8734 34 36.5 24.74 23.47 24.77 48.8736 36 38.5 25.79 24.47 25.82 50.88
87° Tee / DWGVØ-87T
* - Installed lengths. Includes Locking Band with gear Clamp.
Ø13‘‘-Ø36‘‘
ØB
ØA
D
ØA
ØB
F
F-1
.25
E
5.50
2.4
8
C5.
50
87.0°
5.50
38
Ø ØA ØB C D E F ØG ØH3 3 5
Cu
sto
mer
Dim
ensi
on
Cu
sto
mer
Dim
ensi
on
Cu
sto
mer
Dim
ensi
on
Cu
sto
mer
Dim
ensi
on
Cu
sto
mer
Dim
ensi
on
Cu
sto
mer
Dim
ensi
on
4 4 65 5 76 6 87 7 98 8 109 9 1110 10 1212 12 14
87° Reduction Tee / DWGVØ-87TØ
* - Installed length is determined by diameter G. Includes Locking Band with gear Clamp
Ø3‘‘-Ø12‘‘
H
4.30
4.3
0
4.3
0
C
B
F
F -
2.28
E
D
G
87.0°
A
inner female
inner male
inner male
DWGVmale
DWGVfemale
DWGVfemale
Ø6 - M 1:10
n
gasket
Ø 3 4 5 6 7 8 9 10 12A 3 4 5 6 7 8 9 10 12B 5 6 7 8 9 10 11 12 14C Customer DimensionD Customer DimensionE Customer DimensionF Customer DimensionG Customer DimensionH Customer Dimensionn 3.00 4.00
1 2 3 4
A
B
C
D
E
F
© je
rem
ias
Gm
bH. A
ll rig
hts
rese
rved
, als
o re
gard
ing
any
disp
osal
, exp
loita
tion,
edi
ting,
dis
tribu
tion,
as
wel
l as
in th
e ev
ent o
f app
licat
ions
for i
ndus
trial
pro
perty
righ
ts.
description
code
drawing no.
1 of 1
format
scale
sheet
USLETTER87° Reduction Tee
DWGVØ-87TØ
1:6
02-02-05-22102-909
inch / lb
modified by
approved by
revisions-no.see page 2 see page 2A0
namedate
checked by
drawn by
surface:inside/outside
material:inside/outside
UL-1028
07.02.2017 FBA
DWGV PRODUCTS
TEES
Ø ØA ØB C D E F ØG ØH13 13 15.5
Cu
sto
mer
Dim
ensi
on
Cu
sto
mer
Dim
ensi
on
Cu
sto
mer
Dim
ensi
on
Cu
sto
mer
Dim
ensi
on
Cu
sto
mer
Dim
ensi
on
Cu
sto
mer
Dim
ensi
on
14 14 16.516 16 18.518 18 20.520 20 22.522 22 24.524 24 26.526 26 28.528 28 30.530 30 32.532 32 34.534 34 36.536 36 38.5
87° Reduction Tee / DWGVØ-87TØ
* - Installed length is determined by diameter G. Includes Locking Band with gear Clamp
Ø13‘‘-Ø36‘‘
ØB
5.50
H
H-1
.25
G5.
50
2.4
8
ØA
E
F5.50
87.0°
ØC
ØD
39
DWGV PRODUCTS
TEES
87° Boot Tee / DWGVØ-87BT
Ø ØA ØB C D E F3 3 5 9.78 5.67 10.46 15.824 4 6 10.69 6.15 11.67 17.235 5 7 11.60 6.63 12.87 18.646 6 8 12.51 7.11 14.08 20.067 7 9 13.42 7.59 15.26 21.478 8 10 14.33 8.07 16.49 22.899 9 11 15.24 8.55 17.70 24.3010 10 12 16.15 9.03 18.91 25.7212 12 14 17.97 9.98 21.32 28.54
Ø3‘‘-Ø12‘‘ 87
.0°
D
C
F -
2.19
B
A
A
B
E
F
4.3
0
4.30
4.3
0
1.0
0
45.0°
femalesw-gv
maledw-gv
femaledw-gvmalesw-gv
malesw-gv
femaledw-gv
n
M 1:10 (Ø6)
gasket
Ø 3 4 5 6 7 8 9 10 12A 3 4 5 6 7 8 9 10 12B 5 6 7 8 9 10 11 12 14C 9.78 10.69 11.6 12.51 13.42 14.33 15.24 16.15 17.97D 5.67 6.15 6.63 7.11 7.59 8.07 8.55 9.03 9.99E 10.46 11.67 12.87 14.08 15.29 16.5 17.7 18.91 21.32F 15.82 17.23 18.65 20.06 21.47 22.89 24.3 25.72 28.55n 4lb 4.89 6.41 8.09 9.92 11.87 14.02 16.31 18.76 24.08
1 2 3 4
A
B
C
D
E
F
© je
rem
ias
Gm
bH. A
ll rig
hts
rese
rved
, als
o re
gard
ing
any
disp
osal
, exp
loita
tion,
edi
ting,
dis
tribu
tion,
as
wel
l as
in th
e ev
ent o
f app
licat
ions
for i
ndus
trial
pro
perty
righ
ts.
description
code
drawing no.
1 of 1
format
scale
sheet
USLETTER87° Boot Tee
DWGVØ-87BT
1:6inch / lb
modified by
approved by
revisions-no.
namedate
checked by
drawn by
surface:inside/outside
material:inside/outside
UL-no.
5/17/2018 DAR
* - Installed lengths. Includes Locking Band with gear Clamp.
87° Boot Tee / DWGVØ-87BT
Ø ØA ØB C D E F13 13 15.5 20.51 11.83 24.3 34.2814 14 16.5 21.42 12.31 25.51 35.6916 16 18.5 23.23 13.27 27.92 38.5218 18 20.5 25.05 14.22 30.34 41.3520 20 22.5 26.87 15.18 32.75 44.1822 22 24.5 28.69 16.14 35.16 4724 24 26.5 30.51 17.1 37.58 49.8326 26 28.5 32.33 18.06 39.99 52.6628 28 30.5 34.15 19.02 42.41 55.4930 30 32.5 35.97 19.97 44.82 58.3232 32 34.5 37.79 20.93 47.24 61.1534 34 36.5 39.61 21.89 49.65 63.9736 36 38.5 41.42 22.85 52.06 66.8
Ø13‘‘-Ø36‘‘
87.0°
F -
1.25
E
F
D
C
5.5
0 5
.50
5.50
B
A
B
A
2.4
8
1.2
5
n
M 1:12 (Ø6)
Ø 5 6 7 8 9 10 11 12 13 14 16 18 20 22 24 26 28 30 32 34 36A 5 6 7 8 9 10 11 12 13 14 16 18 20 22 24 26 28 30 32 34 36B 7.5 8.5 9.5 10.5 11.5 12.5 13.5 14.5 15.5 16.5 18.5 20.5 22.5 24.5 26.5 28.5 30.5 32.5 34.5 36.5 38.5C 13.25 14.16 15.07 15.98 16.89 17.8 18.72 19.63 20.54 21.45 23.27 25.09 26.9 28.72 30.54 32.36 34.18 36 37.82 39.64 41.46D 8.01 8.48 8.96 9.44 9.92 10.4 10.89 11.36 11.84 12.32 13.28 14.24 15.2 16.16 17.12 18.07 19.03 19.99 20.95 21.91 22.87E 14.67 15.88 17.09 18.29 19.5 20.71 21.93 23.14 24.34 25.55 27.96 30.38 32.79 35.21 37.62 40.03 42.45 44.86 47.28 49.69 52.11F 23 24.41 25.83 27.24 28.65 30.07 31.5 32.91 34.33 35.74 38.57 41.4 44.22 47.05 49.88 52.71 55.54 58.37 61.2 64.02 66.85n 4 6 8 12 16lb 19.21 23.08 27.21 31.58 36.54 41.43 50.78 56.72 62.97 69.84 83.67 98.70 114.93 132.21 151.48 171.18 191.94 213.70 237.38 262.01 287.70
1 2 3 4
A
B
C
D
E
F
© je
rem
ias
Gm
bH. A
ll rig
hts
rese
rved
, als
o re
gard
ing
any
disp
osal
, exp
loita
tion,
edi
ting,
dis
tribu
tion,
as
wel
l as
in th
e ev
ent o
f app
licat
ions
for i
ndus
trial
pro
perty
righ
ts.
description
code
drawing no.
1 of 1
format
scale
sheet
USLETTER87° Boot Tee
DWFLØ-87BT+1
1:6inch / lb
modified by
approved by
revisions-no.
namedate
checked by
drawn by
surface:inside/outside
material:inside/outside
UL-no.
6/4/2018 DAR
* - Installed lengths. Includes Locking Band with gear Clamp.
40
Ø ØA ØB C D E F ØG ØH3 3 5
Cu
sto
mer
Dim
ensi
on
Cu
sto
mer
Dim
ensi
on
Cu
sto
mer
Dim
ensi
on
Cu
sto
mer
Dim
ensi
on
Cu
sto
mer
Dim
ensi
on
Cu
sto
mer
Dim
ensi
on
4 4 65 5 76 6 87 7 98 8 109 9 1110 10 1212 12 14
87° Boot Reduction Tee / DWGVØ-87BTØØ3‘‘-Ø12‘‘
* - Installed length is determined by diameter G. Includes Locking Band with gear Clamp
DWGV PRODUCTS
TEES
Ø ØA ØB C D E F ØG ØH13 13 15.5
Cu
sto
mer
Dim
ensi
on
Cu
sto
mer
Dim
ensi
on
Cu
sto
mer
Dim
ensi
on
Cu
sto
mer
Dim
ensi
on
Cu
sto
mer
Dim
ensi
on
Cu
sto
mer
Dim
ensi
on
14 14 16.516 16 18.518 18 20.520 20 22.522 22 24.524 24 26.526 26 28.528 28 30.530 30 32.532 32 34.534 34 36.536 36 38.5
87° Boot Reduction Tee / DWGVØ-87BTØØ13‘‘-Ø36‘‘
* - Installed length is determined by diameter G. Includes Locking Band with gear Clamp
ØC
ØD
F
E
87.0°
ØA
ØB
2.4
85.50
G
H
H-1
.25
5.50
5.50
41
DWGV PRODUCTS
TEES
90° Tee / DWGVØ-90T
Ø ØA ØB C D E F3 3 5 6.85 6.85 6.85 13.704 4 6 7.35 7.35 7.35 14.705 5 7 7.85 7.85 7.85 15.706 6 8 8.35 8.35 8.35 16.707 7 9 8.85 8.85 8.85 17.708 8 10 9.35 9.35 9.35 18.709 9 11 9.85 9.85 9.85 19.7010 10 12 10.35 10.35 10.35 20.7012 12 14 11.35 11.35 11.35 22.70
Ø3‘‘-Ø12‘‘ 87
.0°
D
C
F -
2.19
B
A
A
B
E
F
4.3
0
4.30
4.3
0
1.0
0
45.0°
femalesw-gv
maledw-gv
femaledw-gvmalesw-gv
malesw-gv
femaledw-gv
n
M 1:10 (Ø6)
gasket
Ø 3 4 5 6 7 8 9 10 12A 3 4 5 6 7 8 9 10 12B 5 6 7 8 9 10 11 12 14C 9.78 10.69 11.6 12.51 13.42 14.33 15.24 16.15 17.97D 5.67 6.15 6.63 7.11 7.59 8.07 8.55 9.03 9.99E 10.46 11.67 12.87 14.08 15.29 16.5 17.7 18.91 21.32F 15.82 17.23 18.65 20.06 21.47 22.89 24.3 25.72 28.55n 4lb 4.89 6.41 8.09 9.92 11.87 14.02 16.31 18.76 24.08
1 2 3 4
A
B
C
D
E
F
© je
rem
ias
Gm
bH. A
ll rig
hts
rese
rved
, als
o re
gard
ing
any
disp
osal
, exp
loita
tion,
edi
ting,
dis
tribu
tion,
as
wel
l as
in th
e ev
ent o
f app
licat
ions
for i
ndus
trial
pro
perty
righ
ts.
description
code
drawing no.
1 of 1
format
scale
sheet
USLETTER87° Boot Tee
DWGVØ-87BT
1:6inch / lb
modified by
approved by
revisions-no.
namedate
checked by
drawn by
surface:inside/outside
material:inside/outside
UL-no.
5/17/2018 DAR
* - Installed lengths. Includes Locking Band with gear Clamp.
90° Tee / DWGVØ-90T
Ø ØA ØB C D E F13 13 15.5 13.29 13.29 13.29 27.8214 14 16.5 13.79 13.79 13.79 28.8216 16 18.5 14.79 14.79 14.79 30.8218 18 20.5 15.79 15.79 15.79 32.8220 20 22.5 16.79 16.79 16.79 34.8222 22 24.5 17.79 17.79 17.79 36.8224 24 26.5 18.79 18.79 18.79 38.8226 26 28.5 19.79 19.79 19.79 40.8228 28 30.5 20.79 20.79 20.79 42.8230 30 32.5 21.79 21.79 21.79 44.8232 32 34.5 22.79 22.79 22.79 46.8234 34 36.5 23.79 23.79 23.79 48.8236 36 38.5 24.79 24.79 24.79 50.82
Ø13‘‘-Ø36‘‘
* - Installed lengths. Includes Locking Band with gear Clamp.
ØB
5.50
5.50
5.50
ØA
C
2.4
8
E
F-1
.25
F
D
ØA
ØB
90.0°
42
DWGV PRODUCTS
TEES
90° Reduction Tee / DWGVØ-90TØ
Ø ØA ØB C D E F ØG ØH3 3 5
Cu
sto
mer
Dim
ensi
on
Cu
sto
mer
Dim
ensi
on
Cu
sto
mer
Dim
ensi
on
Cu
sto
mer
Dim
ensi
on
Cu
sto
mer
Dim
ensi
on
Cu
sto
mer
Dim
ensi
on
4 4 65 5 76 6 87 7 98 8 109 9 1110 10 1212 12 14
Ø3‘‘-Ø12‘‘
* - Installed length is determined by diameter G. Includes Locking Band with gear Clamp
90° Reduction Tee / DWGVØ-90TØ
Ø ØA ØB C D E F ØG ØH13 13 15.5
Cu
sto
mer
Dim
ensi
on
Cu
sto
mer
Dim
ensi
on
Cu
sto
mer
Dim
ensi
on
Cu
sto
mer
Dim
ensi
on
Cu
sto
mer
Dim
ensi
on
Cu
sto
mer
Dim
ensi
on
14 14 16.516 16 18.518 18 20.520 20 22.522 22 24.524 24 26.526 26 28.528 28 30.530 30 32.532 32 34.534 34 36.536 36 38.5
Ø13‘‘-Ø36‘‘
* - Installed length is determined by diameter G. Includes Locking Band with gear Clamp
ØB
5.50
2.4
85.50
H-1
.25
H
G
90.0°
ØA
E
5.50 F
ØC
ØD
43
DWGV PRODUCTS
TEES
90° Boot Tee / DWGVØ-90BT
Ø ØA ØB C D E F3 3 5 9.78 5.67 10.46 15.824 4 6 10.69 6.15 11.67 17.235 5 7 11.60 6.63 12.87 18.646 6 8 12.51 7.11 14.08 20.067 7 9 13.42 7.59 15.26 21.478 8 10 14.33 8.07 16.49 22.899 9 11 15.24 8.55 17.70 24.3010 10 12 16.15 9.03 18.91 25.7212 12 14 17.97 9.98 21.32 28.54
Ø3‘‘-Ø12‘‘
90.0°
45.0°
D
C
F -
2.19
B
A
A
B
E
F
4.3
0
4.30
4.3
0
1.0
0
femaledw-gv
malesw-gv
malesw-gv
femaledw-gv
maledw-gv
femalesw-gv
n
M 1:10 (Ø6)
gasket
Ø 3 4 5 6 7 8 9 10 12A 3 4 5 6 7 8 9 10 12B 5 6 7 8 9 10 11 12 14C 9.81 10.73 11.64 12.56 13.47 14.39 15.3 16.21 18.04D 6 6.5 7 7.5 8 8.5 9 9.5 10.5E 10.46 11.67 12.87 14.08 15.29 16.5 17.7 18.91 21.32F 15.82 17.23 18.65 20.06 21.47 22.89 24.3 25.72 28.55n 4lb 4.89 6.41 8.09 9.92 11.87 14.02 16.31 18.76 24.08
1 2 3 4
A
B
C
D
E
F
© je
rem
ias
Gm
bH. A
ll rig
hts
rese
rved
, als
o re
gard
ing
any
disp
osal
, exp
loita
tion,
edi
ting,
dis
tribu
tion,
as
wel
l as
in th
e ev
ent o
f app
licat
ions
for i
ndus
trial
pro
perty
righ
ts.
description
code
drawing no.
1 of 1
format
scale
sheet
USLETTER90° Boot Tee
DWGVØ-90BT
1:6inch / lb
modified by
approved by
revisions-no.
namedate
checked by
drawn by
surface:inside/outside
material:inside/outside
UL-no.
5/18/2018 DAR
* - Installed lengths. Includes Locking Band with gear Clamp.
90° Boot Tee / DWGVØ-90BT
Ø ØA ØB C D E F13 13 15.5 20.59 12.44 24.3 34.2814 14 16.5 21.5 12.94 25.51 35.6916 16 18.5 23.33 13.94 27.92 38.5218 18 20.5 25.16 14.94 30.34 41.3520 20 22.5 26.99 15.94 32.75 44.1822 22 24.5 28.81 16.94 35.16 4724 24 26.5 30.64 17.94 37.58 49.8326 26 28.5 32.47 18.94 39.99 52.6628 28 30.5 34.3 19.94 42.41 55.4930 30 32.5 36.13 20.94 44.82 58.3232 32 34.5 37.96 21.94 47.24 61.1534 34 36.5 39.79 22.94 49.65 64.9736 36 38.5 41.61 23.94 52.06 66.8
Ø13‘‘-Ø36‘‘
* - Installed lengths. Includes Locking Band with gear Clamp.
EF
-1.2
5
F
1.25
ØA
ØB
2.4
8
ØA
ØB
5.50
5.50
5.50
D
C
90.0°
44
90° Boot Reduction Tee / DWGVØ-90BTØ
Ø ØA ØB C D E F ØG ØH3 3 5
Cu
sto
mer
Dim
ensi
on
Cu
sto
mer
Dim
ensi
on
Cu
sto
mer
Dim
ensi
on
Cu
sto
mer
Dim
ensi
on
Cu
sto
mer
Dim
ensi
on
Cu
sto
mer
Dim
ensi
on
4 4 65 5 76 6 87 7 98 8 109 9 1110 10 1212 12 14
Ø3‘‘-Ø12‘‘
* - Installed length is determined by diameter G. Includes Locking Band with gear Clamp
90° Boot Reduction Tee / DWGVØ-90BTØ
Ø ØA ØB C D E F ØG ØH13 13 15.5
Cu
sto
mer
Dim
ensi
on
Cu
sto
mer
Dim
ensi
on
Cu
sto
mer
Dim
ensi
on
Cu
sto
mer
Dim
ensi
on
Cu
sto
mer
Dim
ensi
on
Cu
sto
mer
Dim
ensi
on
14 14 16.516 16 18.518 18 20.520 20 22.522 22 24.524 24 26.526 26 28.528 28 30.530 30 32.532 32 34.534 34 36.536 36 38.5
Ø13‘‘-Ø36‘‘
* - Installed length is determined by diameter G. Includes Locking Band with gear Clamp
DWGV PRODUCTS
TEES
2.4
8 90.0°
H -
1.25
G
H
F
E
5.5
0
5.5
0
5.50
D
C
B
A
femalesw-fl
malesw-fl
malesw-fl
M 1:12 (Ø6)
Ø 5 6 7 8 9 10 11 12 13 14 16 18 20 22 24 26 28 30 32 34 36A 5 6 7 8 9 10 11 12 13 14 16 18 20 22 24 26 28 30 32 34 36B 7.5 8.5 9.5 10.5 11.5 12.5 13.5 14.5 15.5 16.5 18.5 20.5 22.5 24.5 26.5 28.5 30.5 32.5 34.5 36.5 38.5C Customer DimensionD Customer DimensionE Customer DimensionF Customer DimensionG Customer DimensionH Customer Dimension
1 2 3 4
A
B
C
D
E
F
© je
rem
ias
Gm
bH. A
ll rig
hts
rese
rved
, als
o re
gard
ing
any
disp
osal
, exp
loita
tion,
edi
ting,
dis
tribu
tion,
as
wel
l as
in th
e ev
ent o
f app
licat
ions
for i
ndus
trial
pro
perty
righ
ts.
description
code
drawing no.
1 of 1
format
scale
sheet
USLETTER90° Reduction Boot Tee
DWFLØ-90BTØ+1
1:6inch / lb
modified by
approved by
revisions-no.
namedate
checked by
drawn by
surface:inside/outside
material:inside/outside
UL-no.
7/10/2018 DAR
45
DWGV PRODUCTS
TEE CAPS
Drain Tee Cap - Bottom / DWGVØ-DCB Drain Tee Cap - Side / DWGVØ-DCS
Includes Locking Band with gear Clamp Includes Locking Band with gear Clamp
Ø ØA ØB3 3 54 4 65 5 76 6 87 7 98 8 109 9 1110 10 1212 12 1413 13 15.514 14 16.516 16 18.518 18 20.520 20 22.522 22 24.524 24 26.526 26 28.528 28 30.530 30 32.532 32 34.534 34 36.536 36 38.5
Ø ØA ØB C3 3 5
5.75
4 4 65 5 76 6 87 7 98 8 109 9 1110 10 1212 12 1413 13 15.514 14 16.516 16 18.518 18 20.520 20 22.522 22 24.524 24 26.526 26 28.5
7
28 28 30.530 30 32.532 32 34.534 34 36.536 36 38.5
Ø3‘‘-Ø12‘‘ Ø13‘‘-Ø36‘‘Ø3‘‘-Ø12‘‘ Ø13‘‘-Ø36‘‘
2.0
0
B
4.3
0
A
1.0
0 2
.11
femalesw-gv
maledw-gv
5/8"ø x 2" drain
n
M 1:5 (Ø6)
gasket
Ø 3 4 5 6 7 8 9 10 12A 3 4 5 6 7 8 9 10 12B 5 6 7 8 9 10 11 12 14n 4lb 0.85 1.09 1.34 1.61 1.90 2.20 2.53 2.87 3.60
1 2 3 4
A
B
C
D
E
F
© je
rem
ias
Gm
bH. A
ll rig
hts
rese
rved
, als
o re
gard
ing
any
disp
osal
, exp
loita
tion,
edi
ting,
dis
tribu
tion,
as
wel
l as
in th
e ev
ent o
f app
licat
ions
for i
ndus
trial
pro
perty
righ
ts.
description
code
drawing no.
1 of 1
format
scale
sheet
USLETTERDrain Cap - Bottom
DWGVØ-DCB
1:3inch / lb
modified by
approved by
revisions-no.
namedate
checked by
drawn by
surface:inside/outside
material:inside/outside
UL-no.
5/18/2018 DAR
2.1
1
B
A
4.3
0
1.0
0
2.00
femalesw-gv
maledw-gv
5/8"ø x 2" drain
n
M 1:10 (Ø6)
gasket
Ø 3 4 5 6 7 8 9 10 12A 3 4 5 6 7 8 9 10 12B 5 6 7 8 9 10 11 12 14n 4lb 0.84 1.07 1.32 1.59 1.87 2.18 2.50 2.83 3.57
1 2 3 4
A
B
C
D
E
F
© je
rem
ias
Gm
bH. A
ll rig
hts
rese
rved
, als
o re
gard
ing
any
disp
osal
, exp
loita
tion,
edi
ting,
dis
tribu
tion,
as
wel
l as
in th
e ev
ent o
f app
licat
ions
for i
ndus
trial
pro
perty
righ
ts.
description
code
drawing no.
1 of 1
format
scale
sheet
USLETTERDrain Cap - Side
DWGVØ-DCS
1:3inch / lb
modified by
approved by
revisions-no.
namedate
checked by
drawn by
surface:inside/outside
material:inside/outside
UL-no.
5/18/2018 DAR
Ø3‘‘-Ø12‘‘
Ø13‘‘-Ø36‘‘
ØA
ØB
3.0
05.
76 4.5
0 2.4
8
Ø3‘‘-Ø12‘‘
Ø13‘‘-Ø36‘‘
ØA
ØB
C
3.00
46
Tee Cap Access / DWGVØ-TCA
Includes Locking Band with gear Clamp
Ø ØA ØB3 3 54 4 65 5 76 6 87 7 98 8 109 9 1110 10 1212 12 1413 13 15.514 14 16.516 16 18.518 18 20.520 20 22.522 22 24.524 24 26.526 26 28.528 28 30.530 30 32.532 32 34.534 34 36.536 36 38.5
Ø3‘‘-Ø12‘‘ Ø13‘‘-Ø36‘‘
Drain Tee Cap for support / DWGVØ-DCSS
Ø3‘‘-Ø12‘‘ Ø13‘‘-Ø24‘‘
Ø ØA ØB C3 3 5
4 4 6
5 5 7
6 6 8
7 7 9
8 8 10
9 9 11
10 10 12
12 12 14
13 13 15.5 9.96
14 14 16.5 9.96
16 16 18.5 9.96
18 18 20.5 9.96
20 20 22.5 9.96
22 22 24.5 9.96
24 24 26.5 9.96
Works with SBP. Includes Locking Band with gear Clamp.
2.00
8.2
0
6.0
1
4.3
2
A - 0.8
B
A
ø5/8" x 2" drain
maledw-gv
femalesw-gv
femaledw-gv
n
M 1:6 (Ø6)
gasket
Ø 3 4 5 6 7 8 9 10 12A 3 4 5 6 7 8 9 10 12B 5 6 7 8 9 10 11 12 14n 4lb 1.66 2.10 2.58 3.10 3.66 4.26 4.89 5.56 7.00
1 2 3 4
A
B
C
D
E
F
© je
rem
ias
Gm
bH. A
ll rig
hts
rese
rved
, als
o re
gard
ing
any
disp
osal
, exp
loita
tion,
edi
ting,
dis
tribu
tion,
as
wel
l as
in th
e ev
ent o
f app
licat
ions
for i
ndus
trial
pro
perty
righ
ts.
description
code
drawing no.
1 of 1
format
scale
sheet
USLETTERDrain Tee Cap for Support Base
DWGVØ-DCSS
1:3inch / lb
modified by
approved by
revisions-no.
namedate
checked by
drawn by
surface:inside/outside
material:inside/outside
UL-no.
6/1/2018 DAR
DWGV PRODUCTS
TEE CAPS
Ø3‘‘-Ø12‘‘
Ø13‘‘-Ø36‘‘
5.50
6.9
9
ØA
ØA + 2
ØB
Ø3‘‘-Ø12‘‘
Ø13‘‘-Ø36‘‘
ØB
ØA-0.8
C
ØA
3.00
47
DWGV PRODUCTS
INCREASERS
Tapered Eccentric Increaser / DWGVØ-TEIØ
Includes Locking Band with gear Clamp
Ø ØA ØB C D3 3 5
Cu
sto
mer
Dim
ensi
on
Cu
sto
mer
Dim
ensi
on
4 4 65 5 76 6 87 7 98 8 109 9 1110 10 1212 12 14
Ø3‘‘-Ø12‘‘
Tapered Eccentric Increaser / DWGVØ-TEIØ
Includes Locking Band with gear Clamp
Ø ØA ØB C D13 13 15.5
Cu
sto
mer
Dim
ensi
on
Cu
sto
mer
Dim
ensi
on
14 14 16.516 16 18.518 18 20.520 20 22.522 22 24.524 24 26.526 26 28.528 28 30.530 30 32.532 32 34.534 34 36.536 36 38.5
Ø13‘‘-Ø36‘‘
2.48
6.25 2.00 6.25
14.50
15.75
ØA
ØB
ØD
ØC
48
REDUCERS
DWGV PRODUCTS
Tapered Eccentric Reducer / DWGVØ-TERØ
Includes Locking Band with gear Clamp
Ø ØA ØB C D3 3 5
Cu
sto
mer
Dim
ensi
on
Cu
sto
mer
Dim
ensi
on
4 4 65 5 76 6 87 7 98 8 109 9 1110 10 1212 12 14
Ø3‘‘-Ø12‘‘
D
B
10.22
5.25 5.25 2.00
12.50
C
A
inner male
inner female
DWGVfemale
DWGVmale
Ø6 - M 1:8
n
gasket
Ø 3 4 5 6 7 8 9 10 12A 3 4 5 6 7 8 9 10 12B 5 6 7 8 9 10 11 12 14C Customer DimensionD Customer Dimensionn 3 4
1 2 3 4
A
B
C
D
E
F
© je
rem
ias
Gm
bH. A
ll rig
hts
rese
rved
, als
o re
gard
ing
any
disp
osal
, exp
loita
tion,
edi
ting,
dis
tribu
tion,
as
wel
l as
in th
e ev
ent o
f app
licat
ions
for i
ndus
trial
pro
perty
righ
ts.
description
code
drawing no.
1 of 1
format
scale
sheet
USLETTERTapered Eccentric Reducer
DWGVØ-TERØ
1:5
02-02-05-23353-909
inch / lb
modified by
approved by
revisions-no.see page 2 see page 2A0
namedate
checked by
drawn by
surface:inside/outside
material:inside/outside
UL-1039
07.02.2017 FBA
Tapered Eccentric Reducer / DWGVØ-TERØ
Includes Locking Band with gear Clamp
Ø ØA ØB C D13 13 15.5
Cu
sto
mer
Dim
ensi
on
Cu
sto
mer
Dim
ensi
on
14 14 16.516 16 18.518 18 20.520 20 22.522 22 24.524 24 26.526 26 28.528 28 30.530 30 32.532 32 34.534 34 36.536 36 38.5
Ø13‘‘-Ø36‘‘
ØA
ØB
ØD
ØC
6.25 2.00 6.25
14.50
15.75
49
DWGV PRODUCTS
FLASHINGS
Flat Cone Flashing / DWGVØ-FCF
Ø ØC ØD E3 6 9 214 7 10 225 8 11 236 9 12 247 10 13 258 11 14 269 12 15 2710 13 16 2812 15 18 3013 16.6 19.6 31.614 17.6 20.6 32.616 19.6 22.6 34.618 21.6 24.6 36.620 23.6 26.6 38.622 25.6 28.6 40.624 27.6 30.6 42.626 29.61 32.61 44.6128 31.61 34.61 46.6130 33.61 36.61 48.6132 35.61 38.61 50.6134 37.61 40.61 52.6136 39.61 42.61 54.61
Ø ØB3 54 65 76 87 98 109 1110 1212 1413 15.514 16.516 18.518 20.520 22.522 24.524 26.526 28.528 30.530 32.532 34.534 36.536 38.5
Storm Collar For Coned Flashings / DWGVØ-SCCF
50
DWGV PRODUCTS
FLASHINGS
Ø ØC ØD ß3 6 9
Cus
tom
er D
imen
sio
n
4 7 105 8 116 9 127 10 138 11 149 12 1510 13 1612 15 1813 16 1914 17 2016 19 2218 21 2420 23 2622 25 2824 27 3026 29 3228 31 3430 33 3632 35 3834 37 4036 39 42
Pitched Cone Flashing / DWGVØ-PCF
Ø B ØC3 5.5 15.554 6.5 16.65 7.5 17.66 8.5 18.67 9.5 19.68 10.5 20.69 11.5 21.610 12.5 22.612 14.5 24.613 15.5 25.614 16.5 26.616 18.5 28.618 20.5 30.620 22.5 32.622 24.5 34.624 26.5 36.626 28.5 38.628 30.5 40.630 32.5 42.632 34.5 44.634 36.5 46.636 38.5 48.6
Storm Collar / DWKLØ-SC
For wall penetrations
51
Ø C ØD ØE3 13 5.50 7.50
4 14 6.50 8.50
5 15 7.50 9.50
Square Wall Thimble / DWGVØ-SWT
DWGV PRODUCTS
FLASHINGS / THIMBLES
Ø ØC ØD ØE ØF ØG13
Ø +
23/ 4
“
Ø +
4“
Ø +
61 /
2“
Ø +
62/ 3
“
Ø +
10
“
141618202224262830323436
Square LT Thimble / DWGVØ-LTT
Small diameter, Single-wall only LT: Low temp. 550°F or less for use at roof or wall
G
F
D
C
1.00
1.00
0.28
Ø6 M
1:10
12.00
AA
C
E
Ø3
45
67
89
1012
A3
45
67
89
1012
B5
67
89
1011
1214
CA
Ø + 10"
DA
Ø + 2
14 "E
AØ
+ 2 16 "
FA
Ø + 2
12 "G
AØ
+ 6"lb
7.248.15
9.0810.00
10.9411.88
12.8313.78
15.7
12
34
ABCDEF
© jeremias GmbH. All rights reserved, also regarding any disposal, exploitation, editing, distribution, as well as in the event of applications for industrial property rights.
description
code
drawing no.
1 of 1
format
scale
sheet US
LETTERLow
Temperature Thim
ble
DW
GVØ
-LTT
1:8
02-02-05-25381-909
inch / lb
modified by
approved by
revisions-no.316L304
2BBA
A0
name
date
checked by
drawn by
surface:inside/outside
material:
inside/outside
01.02.2017FB
A
52
DWGV PRODUCTS
Ø ØA ØB ØC3 2.98 5 2.444 3.98 6 3.255 4.98 7 4.066 5.98 8 4.877 6.98 9 5.698 7.98 10 6.509 8.98 11 7.3110 9.98 12 8.1212 11.98 14 9.7513 13 - 10.5614 14 - 11.3716 16 - 1318 18 - 14.6220 20 - 16.2522 22 - 17.8724 24 - 19.526 26 - 21.1228 28 - 22.7530 30 - 24.3732 32 - 2634 34 - 27.6236 36 - 29.25
Exit Cone / DWGVØ-EC
TERMINATIONS
Ø ØA ØB3 3 54 4 65 5 76 6 87 7 98 8 109 9 1110 10 1212 12 1413 13 -14 14 -16 16 -18 18 -20 20 -22 22 -24 24 -26 26 -28 28 -30 30 -32 32 -34 34 -36 36 -
Miter Cut Termination / DWGVØ-MCS
Ø3‘‘-Ø12‘‘ Ø13‘‘-Ø36‘‘ Ø3‘‘-Ø12‘‘ Ø13‘‘-Ø36‘‘
Ø3‘‘-Ø12‘‘
Ø13‘‘-Ø36‘‘
6.0
0
ØA
ØC
5.30
4.7
5
Ø3‘‘-Ø12‘‘
Ø13‘‘-Ø36‘‘
7.75
6.50
ØA
45.0°
53
Ø ØA ØB3 3 5
4 4 6
5 5 7
6 6 8
7 7 9
8 8 10
9 9 11
10 10 12
12 12 14
Opened Termination / DWGVØ-OTN Opened Termination / DWGVØ-FB
Ø ØA ØB13 13 15.5
14 14 16.5
16 16 18.5
18 18 20.5
20 20 22.5
22 22 24.5
24 24 26.5
26 26 28.5
28 28 30.5
30 30 32.5
32 32 34.5
34 34 36.5
36 36 38.5
4.0
0
B
1.5
0
A
M 1:5 (Ø6)
Ø 5 6 7 8 9 10 11 12 13 14 16 18 20 22 24 26 28 30 32 34 36A 5 6 7 8 9 10 11 12 13 14 16 18 20 22 24 26 28 30 32 34 36B 7.5 8.5 9.5 10.5 11.5 12.5 13.5 14.5 15.5 16.5 18.5 20.5 22.5 24.5 26.5 28.5 30.5 32.5 34.5 36.5 38.5lb 1.10 1.23 1.37 1.50 1.64 1.77 1.90 2.04 2.17 2.30 2.57 2.84 3.10 3.37 3.64 5.43 5.81 6.18 6.55 6.93 7.30
1 2 3 4
A
B
C
D
E
F
© je
rem
ias
Gm
bH. A
ll rig
hts
rese
rved
, als
o re
gard
ing
any
disp
osal
, exp
loita
tion,
edi
ting,
dis
tribu
tion,
as
wel
l as
in th
e ev
ent o
f app
licat
ions
for i
ndus
trial
pro
perty
righ
ts.
description
code
drawing no.
1 of 1
format
scale
sheet
USLETTERFinishing Band W/ Insulation
DWFLØ-FB+1
1:3inch / lb
modified by
approved by
revisions-no.
namedate
checked by
drawn by
surface:inside/outside
material:inside/outside
UL-no.
6/11/2018 DAR
DWGV PRODUCTS
TERMINATIONS
54
TERMINATIONS
DWGV PRODUCTS
High Wind Rain Cap / DWGVØ-WRC
Ø ØA ØB ØC D3 3 5 10.30 7.004 4 6 12.30 7.505 5 7 13.80 8.006 6 8 15.40 8.507 7 9 17.30 9.008 8 10 20.00 9.509 9 11 22.00 10.0010 10 12 24.00 10.8012 12 14 28.00 11.8013 13 - 30 1214 14 - 31.5 12.516 16 - 35 1318 18 - 37 13.220 20 - 39 13.522 22 - 41 1424 24 - 44 14.326 26 - 47 14.628 28 - 50 1530 30 - 52 15.332 32 - 55 15.834 34 - 58 16.236 36 - 61 16.7
Ø ØA ØB3 3 54 4 65 5 76 6 87 7 98 8 109 9 1110 10 1212 12 1413 13 -14 14 -16 16 -18 18 -20 20 -22 22 -24 24 -26 26 -28 28 -30 30 -32 32 -34 34 -36 36 -
Opened Termination with Screen / DWGVØ-OTS
Ø3‘‘-Ø12‘‘ Ø13‘‘-Ø36‘‘ Ø3‘‘-Ø12‘‘ Ø13‘‘-Ø36‘‘
A
M 1:8 (Ø6)
Ø
5
6
7
8
9
10
11
12
13
14
16
18
20
22
24
26
28
30
32
34
36
A
5
6
7
8
9
10
11
12
13
14
16
18
20
22
24
26
28
30
32
34
36
1
2
3
4
A B C D E F© jeremias GmbH. All rights reserved, also regarding any disposal, exploitation, editing, distribution, as well as in the event of applications for industrial property rights.
description
codedrawing no.
1 of 1
format
scale
sheetUS
LETTER
Open Ternimation W/ Screen
DWFLØ-OTS+1
1:2
inch / lb
modified by
approved by
revisions-no.
name
date
checked by
drawn by
surface:
inside/outside
material:
inside/outside
UL-no.
7/7/2018
SDJ
Ø3‘‘-Ø12‘‘
Ø13‘‘-Ø36‘‘
ØA
ØA+6.8
ØC
ØA+4.7
0.74
D5.
50 4.2
5
EE
4X
E
55
90° Elbow Termination with Screen / DWGVØ-90ET
Ø ØA ØB C D3 3 5 7.98 8.284 4 6 8.48 8.785 5 7 8.98 9.286 6 8 9.48 9.787 7 9 9.98 10.288 8 10 10.48 10.789 9 11 10.95 11.2810 10 12 11.48 11.7812 12 14 12.48 12.7813 13 15.5 14.43 14.4314 14 16.5 14.93 14.9316 16 18.5 15.93 15.9318 18 20.5 16.93 16.9320 20 22.5 17.93 17.9322 22 24.5 18.93 18.9324 24 26.5 19.93 19.9326 26 28.5 20.93 20.9328 28 30.5 21.93 21.9330 30 32.5 22.93 22.9332 32 34.5 23.93 23.9334 34 36.5 24.93 24.9336 36 38.5 25.93 25.93
Ø ØA ØB C3 3 5 144 4 6 155 5 7 166 6 8 177 7 9 188 8 10 199 9 11 2010 10 12 2112 12 14 2313 13 - 25.2514 14 - 26.2516 16 - 28.2518 18 - 30.2520 20 - 32.2522 22 - 34.2524 24 - 36.2526 26 - 38.2528 28 - 40.2530 30 - 42.2532 32 - 44.2534 34 - 46.2536 36 - 48.25
Tee Termination w/Screen / DWGVØ-90TT
Ø3‘‘-Ø12‘‘ Ø13‘‘-Ø36‘‘ Ø3‘‘-Ø12‘‘ Ø13‘‘-Ø36‘‘
DWGV PRODUCTS
TERMINATIONSC
C -
1.2
5 4.10 4.10
ØA
Ø3‘‘-Ø12‘‘
Ø13‘‘-Ø36‘‘
ØA
1.25
5.50
D5.50
C1.60
90.0°
Ø3‘‘-Ø12‘‘
Ø13‘‘-Ø36‘‘
56
Ø ØA ØB C D3 3 5 9.56 2.644 4 6 9.81 2.715 5 7 10.06 2.786 6 8 10.31 2.847 7 9 10.56 2.918 8 10 10.81 2.989 9 11 11.06 3.0410 10 12 11.31 3.1112 12 14 11.81 3.2413 13 - 14.16 3.814 14 - 14.41 3.8616 16 - 14.91 418 18 - 15.41 4.1320 20 - 15.91 4.2622 22 - 16.41 4.424 24 - 16.91 4.5326 26 - 17.41 4.6728 28 - 17.91 4.830 30 - 18.41 4.9332 32 - 18.91 5.0734 34 - 19.41 5.236 36 - 19.91 5.34
30° Elbow Termination with Screen / DWGVØ-30ET
DWGV PRODUCTS
TERMINATIONS
Ø3‘‘-Ø12‘‘ Ø13‘‘-Ø36‘‘
For all Single-wall parts:
For Single-wall use Inner dimensions only. Our single wall is the inside of the double wall without an outer jacket (and air space or insulation) added to it.
D
5.50
5.50
1.25
ØA
30.0°
Ø3‘‘-Ø12‘‘
Ø13‘‘-Ø36‘‘
57
DWGV PRODUCTS
Ø ØB3 54 65 76 87 98 109 1110 1212 1413 15.514 16.516 18.518 20.520 22.522 24.524 26.526 28.528 30.530 32.532 34.534 36.536 38.5
Locking Band / DWGVØ-LB Firestop plate for GOV / DWGVØ-FS
Ø C ØD3 13 5.504 14 6.505 15 7.506 16 8.507 17 9.508 18 10.509 19 11.5010 20 12.5012 22 14.5013 23 16.114 24 17.116 26 19.118 28 21.120 30 23.122 32 25.124 34 27.126 36 29.1128 38 31.1130 40 33.1132 42 35.1134 44 37.1136 46 39.11
ACCESSORIES
Ø3‘‘-Ø12‘‘ Ø13‘‘-Ø36‘‘
ØB
6.6
0
Ø3‘‘-Ø12‘‘
Ø13‘‘-Ø36‘‘
58
DWGV PRODUCTS
ACCESSORIES
Ø ØA ØB3 3 54 4 65 5 76 6 87 7 98 8 109 9 1110 10 1212 12 1413 13 15.514 14 16.516 16 18.518 18 20.520 20 22.522 22 24.524 24 26.526 26 28.528 28 30.530 30 32.532 32 34.534 34 36.536 36 38.5
Test and Nozzle Port Length/ DWGVØ-TPL
Ø ØA ØB3 3 54 4 65 5 76 6 87 7 98 8 109 9 1110 10 1212 12 1413 13 15.514 14 16.516 16 18.518 18 20.520 20 22.522 22 24.524 24 26.526 26 28.528 28 30.530 30 32.532 32 34.534 34 36.536 36 38.5
Universal Drain Length / DWGVØ-UDL
Includes Locking Band with gear Clamp
Ø3‘‘-Ø12‘‘ Ø13‘‘-Ø36‘‘ Ø3‘‘-Ø12‘‘ Ø13‘‘-Ø36‘‘
7.8
1
B
2.00
A
10.
00
femalesw-gv
malesw-gv
ø1/2" x 2" Nipplewith cap
maledw-gv
femaledw-gv
n
M 1:6 (Ø6)
gasket
Ø 3 4 5 6 7 8 9 10 12A 3 4 5 6 7 8 9 10 12B 5 6 7 8 9 10 11 12 14n 4lb 1.94 2.32 2.70 3.07 3.45 3.83 4.20 4.58 5.33
1 2 3 4
A
B
C
D
E
F
© je
rem
ias
Gm
bH. A
ll rig
hts
rese
rved
, als
o re
gard
ing
any
disp
osal
, exp
loita
tion,
edi
ting,
dis
tribu
tion,
as
wel
l as
in th
e ev
ent o
f app
licat
ions
for i
ndus
trial
pro
perty
righ
ts.
description
code
drawing no.
1 of 1
format
scale
sheet
USLETTERTest Port Length
DWGVØ-TPL
1:3inch / lb
modified by
approved by
revisions-no.
namedate
checked by
drawn by
surface:inside/outside
material:inside/outside
UL-no.
5/23/2018 DAR
B
A
10.
00
7.8
1
5.0
0
2.00
1.0
0
femalesw-gv
malesw-gv
5/8"ø x 2" drain
maledw-gv
femaledw-gv
Ø6 - M 1:8
n
gasket
Ø 3 4 5 6 7 8 9 10 12A 3 4 5 6 7 8 9 10 12B 5 6 7 8 9 10 11 12 14n 4lb 1.89 2.38 2.86 3.34 3.83 4.31 4.81 5.3 6.27
1 2 3 4
A
B
C
D
E
F
© je
rem
ias
Gm
bH. A
ll rig
hts
rese
rved
, als
o re
gard
ing
any
disp
osal
, exp
loita
tion,
edi
ting,
dis
tribu
tion,
as
wel
l as
in th
e ev
ent o
f app
licat
ions
for i
ndus
trial
pro
perty
righ
ts.
description
code
drawing no.
1 of 1
format
scale
sheet
USLETTERUniversal Drain Length
DWGVØ-UDL
1:4inch / lb
modified by
approved by
revisions-no.A0
namedate
checked by
drawn by
surface:inside/outside
material:inside/outside
UL-1018
5/18/2018 DAR
Ø3‘‘-Ø12‘‘
Ø13‘‘-Ø36‘‘
Ø3‘‘-Ø12‘‘
Ø13‘‘-Ø36‘‘
12.0
0
10.7
5
2.4
8
5.38
ØA
ØB
3.00
1/2“x3“ NPT
12.0
0
10.7
5
2.4
8
5.38
ØAØB
3.00
Ø5-Ø24: 1“ x 3“ NPTØ26-Ø36: 2“ x 3“ NPT
59
NOTES
Version: March 2017
USAJeremias Inc.983 Industrial Park DriveMarietta, GA 30062, USAphone: +1 678 388 2740e-mail: [email protected]
RUSSIAwww.jeremias.ru
SPAIN www.jeremias.com.es
POLAND www.jeremias.pl
CZECH REPUBLIC www.jeremias.cz
UNITED KINGDOMwww.jeremias.uk
PRODUCTION SITES
www.jeremiasinc.com
The expert in your area:Jeremias high quality products to be installed only by selected experts.
JEREMIAS IS REPRESENTED IN THE FOLLOWING COUNTRIES:
Austria | Belarus | Belgium | Bulgaria | Brazil | Denmark | Estonia | Hong Kong | Ireland | Kazakhstan | Latvia | Lithuania | Luxembourg |Malta | Netherlands | Norway | Portugal | Romania | Saudi Arabia | Serbia | Singapore | Slovakia | Slovenia | South Africa | Sweden | Tunisia | UAE | Ukraine
EXHAUST SYSTEMS
FRANCEwww.jeremias-france.fr
HUNGARYwww.jeremias.hu
CROATIAwww.jeremias.hr
FINLANDwww.jeremias.fi
ITALYwww.jeremias.it
SWITZERLAND
www.jeremias-schweiz.ch
SALES OFFICES
GERMANYwww.jeremias.de