jbl prx 612m

2
PRX612M Features: Maximum SPL 134 dB peak Dual purpose enclosure for both front-of house and floor monitor applications Eight M10 fly points for horizontal or vertical suspension. One M10 pull-back point. Optimized EQ for monitor or front-of- house applications 305 mm (12 in) Differential Drive ® dual voice-coil and magnetic gap, neodymium woofer 37.5 mm (1.5 in) annular polymer diaphragm, neodymium, compression driver 1000 Watt (Dual 500 watt) Class-D, Crown ® amplifier. DSP input section, crossover, dynamic limiting, component optimization, selectable system EQ Professional XLR line and ¼ in Mic/Instrument inputs, with loop-through. Dual socket pole mount with (angle) down-tilt. Application: PRX612M is the most compact and versatile speaker in the PRX600 Series. It has been designed to deliver maximum performance for its weight and size as both a stage monitor and a front-of-house main PA. Two user selectable EQ settings are provided to optimize the system for either application. With a dual socket pole mount, the PRX612M is a perfect match with a PRX618S subwoofer, offering a high performance self-powered sub/sat system. The PRX615M is comprised of a 305 mm (12 in) 262F-1 Differential Drive ® woofer, a 2408H-1, 37.5 mm (1.5 in) annular polymer diaphragm, neodymium compression driver mounted to a 90° by 50° horn, all driven by 1000 watt (dual 500 watt) Crown ® Class-D digital power amplifier. A proprietary DSP chip is at the core of a fully featured input section, providing user selectable system EQ, protection, input sensitivity selection, cross-over functionality, dynamic limiting and discrete component optimization. The amplifier input panel offers XLR or ¼ in jack compatibility and a sensitivity switch provides extra flexibility, making it possible to connect literally any sound source without using a mixer. Signal present and limiter lights indicate the system status and assist in setting the optimum level, via the level control knob. All PRX600 cabinets are built from a combination of 25 mm (on the top and bottom for added rigidity) and 18 mm, strong, lightweight poplar plywood made structurally sound with tongue and groove joints. All PRX600 Series cabinets are protected by JBL’s tour proven DuraFlex™ finish. Grilles are made from dent-resistant 16 gauge steel and handles are made from lightweight, glass-filled nylon for added strength and durability. All M10 suspension points are constructed from 14 gauge steel and have been tested with a yield-strength of 1000 lbs. each. Specifications: System System Type: Self powered 12", two-way, bass-reflex Maximum SPL Output: 134 dB (Full Range) peak; 133 dB (Monitor) peak Frequency Range (-10 dB): Full Range 50 Hz-19.5 kHz Monitor (vertical orientation) 60 Hz-19.5 kHz Monitor (monitor orientation) 51 Hz-19.5 kHz Frequency Response (±3 dB): Full Range 60 Hz-17.5 kHz Monitor (vertical orientation) 90 Hz-18 kHz Monitor (monitor orientation) 61 Hz-18.5 kHz Input Connectors: Balanced XLR / 1/4" combo jack with XLR loop through Input Impedance: 20K ohms (balanced), 10K ohms (unbalanced) Signal indicators: Limit: Red LED indicates limiter active condition Signal: Green LED indicates signal present EQ: Presets for use in Main and Monitor position Dynamic Control (Input): dbx Type IV™ limiter circuit Crossover Modes: DSP controlled. LF: 48 dB/Oct filter slope High & Low Pass; HF: 36 dB/Oct High Pass Crossover Frequency: 2 kHz Amplifier Design: Crown ® Class D Power Rating: 1000 W (2 x 500) Speaker LF Driver: 1 x JBL 262F-1 380 mm (12 in) Differential Drive ® dual voice- coil and magnetic gap, neodymium woofer HF Driver: 1 x JBL 2408H-1 37.5 mm (1.5 in) annular polymer diaphragm, neodymium compression driver Coverage Pattern: 90° x 50° nominal Directivity Index (DI): 9.8 dB Directivity Factor (Q): 9.6 Enclosure: Asymmetrical, 18 mm, plywood Suspension/ Mounting: Dual 36 mm pole socket, 8 x M10 Suspension Points and 1 x M10 Pull-Back Point Transport: Integrated handle with backing cup Finish: Obsidian DuraFlex™ finish Grille: Powder coated, Obsidian, 16 gauge perforated steel with acoustically transparent black cloth backing. Input Connectors: Balanced XLR / 1/4" combo jack with XLR loop through Dimensions (H x W x D): 592 mm x 353 mm x 340 mm (23.3" x 13.9" x 13.4") Net Weight: 15.6 kg (34.5 lb) Gross Weight: 19.2 kg (42.5 lb) Maximum Peak output measured with IEC pink noise at 1 meter in front of speaker baffle under free space conditions. Measurement instrument set to peak hold. Speaker muted and released at full power, recording maximum peak level. JBL continually engages in research related to product improvement. Some materials, production methods and design refinements are introduced into existing products without notice as a routine expression of that philosophy. For this reason, any current JBL product may differ in some respect from its published description, but will always equal or exceed the original design specifications unless otherwise stated. Self Powered 12", Two-Way, Bass-Reflex Professional Series

Upload: diago-sofrano

Post on 06-Mar-2015

60 views

Category:

Documents


5 download

TRANSCRIPT

Page 1: JBL PRX 612M

PRX612MFeatures:� Maximum SPL 134 dB peak� Dual purpose enclosure for both front-of

house and floor monitor applications� Eight M10 fly points for horizontal or

vertical suspension. One M10 pull-backpoint.

� Optimized EQ for monitor or front-of-house applications

� 305 mm (12 in) Differential Drive® dualvoice-coil and magnetic gap, neodymiumwoofer

� 37.5 mm (1.5 in) annular polymerdiaphragm, neodymium, compressiondriver

� 1000 Watt (Dual 500 watt) Class-D,Crown® amplifier.

� DSP input section, crossover, dynamiclimiting, component optimization,selectable system EQ

� Professional XLR line and ¼ inMic/Instrument inputs, with loop-through.

� Dual socket pole mount with (angle)down-tilt.

Application:PRX612M is the most compact and

versatile speaker in the PRX600 Series. Ithas been designed to deliver maximumperformance for its weight and size as botha stage monitor and a front-of-house mainPA. Two user selectable EQ settings areprovided to optimize the system for eitherapplication. With a dual socket pole mount,the PRX612M is a perfect match with aPRX618S subwoofer, offering a highperformance self-powered sub/sat system.

The PRX615M is comprised of a 305 mm(12 in) 262F-1 Differential Drive® woofer, a2408H-1, 37.5 mm (1.5 in) annular polymerdiaphragm, neodymium compression drivermounted to a 90° by 50° horn, all driven by1000 watt (dual 500 watt) Crown® Class-Ddigital power amplifier. A proprietary DSPchip is at the core of a fully featured inputsection, providing user selectable systemEQ, protection, input sensitivity selection,cross-over functionality, dynamic limitingand discrete component optimization.

The amplifier input panel offers XLR or¼ in jack compatibility and a sensitivityswitch provides extra flexibility, making itpossible to connect literally any soundsource without using a mixer. Signal presentand limiter lights indicate the system statusand assist in setting the optimum level, viathe level control knob.

All PRX600 cabinets are built from acombination of 25 mm (on the top andbottom for added rigidity) and 18 mm,strong, lightweight poplar plywood madestructurally sound with tongue and groovejoints. All PRX600 Series cabinets areprotected by JBL’s tour proven DuraFlex™finish. Grilles are made from dent-resistant16 gauge steel and handles are made fromlightweight, glass-filled nylon for addedstrength and durability. All M10 suspensionpoints are constructed from 14 gauge steeland have been tested with a yield-strengthof 1000 lbs. each.

Specifications:System

System Type: Self powered 12", two-way, bass-reflexMaximum SPL Output: 134 dB (Full Range) peak; 133 dB (Monitor) peak

Frequency Range (-10 dB): Full Range 50 Hz-19.5 kHzMonitor (vertical orientation) 60 Hz-19.5 kHzMonitor (monitor orientation) 51 Hz-19.5 kHz

Frequency Response (±3 dB): Full Range 60 Hz-17.5 kHzMonitor (vertical orientation) 90 Hz-18 kHzMonitor (monitor orientation) 61 Hz-18.5 kHz

Input Connectors: Balanced XLR / 1/4" combo jack with XLR loop through Input Impedance: 20K ohms (balanced), 10K ohms (unbalanced) Signal indicators: Limit: Red LED indicates limiter active condition

Signal: Green LED indicates signal presentEQ: Presets for use in Main and Monitor position

Dynamic Control (Input): dbx Type IV™ limiter circuit Crossover Modes: DSP controlled. LF: 48 dB/Oct filter slope High & Low Pass;

HF: 36 dB/Oct High PassCrossover Frequency: 2 kHz

AmplifierDesign: Crown® Class D

Power Rating: 1000 W (2 x 500)Speaker

LF Driver: 1 x JBL 262F-1 380 mm (12 in) Differential Drive® dual voice-coil and magnetic gap, neodymium woofer

HF Driver: 1 x JBL 2408H-1 37.5 mm (1.5 in) annular polymer diaphragm,neodymium compression driver

Coverage Pattern: 90° x 50° nominalDirectivity Index (DI): 9.8 dBDirectivity Factor (Q): 9.6

Enclosure: Asymmetrical, 18 mm, plywoodSuspension/ Mounting: Dual 36 mm pole socket, 8 x M10 Suspension Points and 1 x

M10 Pull-Back PointTransport: Integrated handle with backing cup

Finish: Obsidian DuraFlex™ finish Grille: Powder coated, Obsidian, 16 gauge perforated steel with

acoustically transparent black cloth backing. Input Connectors: Balanced XLR / 1/4" combo jack with XLR loop through

Dimensions (H x W x D): 592 mm x 353 mm x 340 mm(23.3" x 13.9" x 13.4")

Net Weight: 15.6 kg (34.5 lb)Gross Weight: 19.2 kg (42.5 lb)

Maximum Peak output measured with IEC pink noise at 1 meter in front of speaker baffle under free space conditions.Measurement instrument set to peak hold. Speaker muted and released at full power, recording maximum peak level.

JBL continually engages in research related to product improvement. Some materials, production methods and designrefinements are introduced into existing products without notice as a routine expression of that philosophy. For thisreason, any current JBL product may differ in some respect from its published description, but will always equal orexceed the original design specifications unless otherwise stated.

Self Powered 12",Two-Way, Bass-Reflex

Professional Series

78058_JBL_PRX612M.qxd 5/27/10 1:06 PM Page 1

Page 2: JBL PRX 612M

23.2589.1

10.8273.6

9.5241.1

30.0°

13.9352.7

13.4340.6

19.2486.7

2.050.4

1.639.6

6.9176.4

SS PRX612MCRP05/10

� PRX612M 12" Self Powered Two-Way, Bass-Reflex

POWER

LINE SELECT

AC LINE INPUT 100V~ -240V~

50/60 Hz 5A 600W

MIC LEVEL

LINE MONITOR

MAIN

OUT

IN

LIMITER

SIGNAL l

INPUT EQ

JBL PROFESSIONALNorthridge, CA. USA

Equipped with Differential Drive®

Transducer Technology U.S. PATENT 5,748,760

Other U.S. and foreign patents pending

+4dB

-10dB

PRX612M

CSA Certification applies toAmplifier Module Only

CSA Certificated to operate at 120V~ in Canada

T5AL250V

N 1 0 8

Designed in the USAAssembled by JBL in Mexico

PRX612M Input Panel

20 100 1000 10000 20000

Frequency (Hz)

70

80

90

100

110

SP

L (d

B)

Frequency Response

JBL Professional8500 Balboa Boulevard, P.O. Box 2200Northridge, California 91329 U.S.A.© Copyright 2010 JBL Professional

www.jblpro.com

Dimensions in (mm) inches

Block Diagram

Level

Signal Present

DSP

InputHigh

Low

Sensitivity Power Amplifiers

Output EQ Select

Limiter

78058_JBL_PRX612M.qxd 5/27/10 1:06 PM Page 2