james hawkins resume (1e)

Résumé of James Résumé of James HawkinsHawkinsMobile : 0427 026 925Email: [email protected] 5 Harbinger CourtNerang, QLD 4211

INTRODUCTION To whom it my concern;

I have been on barrow island working for MAS (AGC group) on the CB&I & Kent’s joint venture. This was a short term project. On the project I was on the mechanical installation team Woking on the gas compression trains. We worked with structural steel drawings. We were installing heavy structural steel, gantry cranes, walkways, stairs, grid mesh, platforms & hand railing systems & pipe supports this all had to be stick built, we also worked on the mixed refrigerant compressors and propane compressors, the enclosure for the compressors & also laser motor alignments including soft foot alignment on compressor helper motors, pump motors & fan motors to name a few.

Before this I was a leading hand working at Giovenco Industries Curtis Island for Bechtel on the gas train compressor system that compressors gas to a liquid at the rate of 600lt to 1lt. I looking after a nine-man crew doing P&id mark-up, Line identification, QA, Line walk downs, Punch listing, redline mark-up’s, Diagnostics of piping vales & instrumentation throughout a functional gas plant under the permit to work system.

Previous to this I was a leading hand working at East coast Development Engineering between Dalby & Roma in the gas industry doing gas gathering, shutdown works and redesign of piping installation works under the permit to work systems in field compressor stations with in the area between Dalby & Roma. We installing well head separator

Resume of James Hawkins 0427 026 925 of 9

mailto:[email protected]

packages, as well as Piping and Instrumentation, Commissioning pressure testing gas & hydro, installing well head double block & bleeds, Also the hydraulic pump & water separator unit’s this consists of using the QGC permit to work system, QGC Isolation systems, Commissioning & LAAR’S.

I am a Trade Qualified Mechanical Fitter Engineering. I have Extensive experience in Construction heavy industrial, Gas plant operations, Metal fabrication, Piping & Instrumentation, Commissioning, Isolations, P&id mark ups, Line walk downs, Punch listing, & Production engineering.

My career objective is to work in a progressive organisation & be part of a team culture that promotes safety, development & open communication to further my experience & skill set in my chosen career, also demonstrate to an employer how my abilities can be of value to their business.

Previous to this I was at Condabri at the water treatment facility for Leighton’s / Origin as a leading hand mechanical fitter, which includes staff development, Redlining, P&id mark-up’s, ISO tracking, Rl positioning, Motor alignment, Actuated & manual valve fitment & alignment, may press & George fisher products, Hydro testing, Commissioning, Piping & instrumentation, permit to work systems Leighton’s & Origin, lock out tag out, to name a few. I am a very skilled tradesman with extensive knowledge across various trades.

Licences / Tickets / Professional Development

Certificate lll Engineering Mechanical (fitting & turning)

Night shift supervisor Leading hand Leighton’s (Condabri & ready creek) Leading hand Giovenco (Curtis island aplng) Team leader (EDE)

Elevated Work Platform over 11mtrs (EWP) Working at heights


LF Forklift licence 4x4 drivers training (RACQ & AUSTRALIAN 4X4) Permit accepter & issuer (LEIGHTONS) Permit accepter (Bechtel) Permit accepter (QGC / EDE & ORIGIN) Lockout tag out course (Leighton’s, Origin, QGC, EDE) Hydrostatic & gas testing officer Advanced gas testing officer Isolation officer (QGC & EDE) Commissioning MISC Card CPR Course First Aid

Current QLD ‘C’ Class Driver’s Licence White card (201300130) Fire safety course On seen controller course May press course Cold Fusion welding course (George fisher) Pipeline technician course Isometric drawing course P&id’s drawing course Time management coarse

Leighton’s Induction (Condabri & Ready Creek) Origin Induction module 0, 1, 2 (Condabri & Ready Creek) QGC Induction (Kumbarilla Park & Woleebee Creek) EDE Induction Exceptional problem solving skills Workshop safety officer OHS General Safety Induction (Construction industry) Overhead crane (3 ton) Overhead crane (4 ton) Overhead crane (5 ton)

Key Strengths and Skills:

Site / Manufacturing , maintenance Skills in the heavy industrial sector:

Over 10 years Experience in Project management, within the heavy industrial sector of manufacturing & maintenance of industrial caravans, CGC mobile camps semi trailer & also skid mounted camps and trailers including Government tenders. Including estimating, Workforce management, Maintenance management, Design management, Production management, Able to run multiple projects simultaneously and handover to client.


Over 20 years Experience in the Mechanical trade including, race engines, engines, diesel engines, gearboxes, diffs, hydraulics, compressed air, auto electrical, trailers including semitrailers & multifitment.

Over 20 years of experience in the Maintenance management, maintenance & Premaintenance of heavy industrial, fixed plant machinery, machinery, forklifts, excavators, bobcats, frontend loaders, cars, trucks, semi-trailers & trailers.

Over 20 years Experience in light industrial sector Sheet metal fabrication- stainless steel, aluminum, galvanized, zinc & black steel including design, cutting, folding & welding with MIG, TIG, Oxy and Arc.

Over 12 years Experience in auto electrical trucks, trailers, forklifts, caravans & excavators.

7 years Experience in generator, maintenance, fitment, wiring (single pole & double pole) & noise reduction.

5 years’ experience in heavy industrial Maintenance management of mining camps. (over 14 mobile camps with 6 semi trailers in each camp) Day to day running of maintenance staff for field work.

4 years’ Experience in commutations including cat5, cat6, remote aerial internet yagi & 3g, rg213, rg6, rg8, rg58, patch panel & telescopic aerial brackets.

Supervisor / leading hand for Leighton’s pty ltd

Able to train Manage, supervise & place staff into the most suitable position, I am very diversified in many trades.

7 years’ Experience in Pipe Fitting/ Plumbing – sullage tanks, macerator pumps, electric toilets, pipe work, grey water, black water, gas, tank installations & design.

7years Experience in Electrical –design following wiring diagrams, ruff ins fit-off, generators, solar installation and inverters, Electrical in 3phase, 240 volts (single & double pole) & 12volt.

Shop fitting- design layout, cool rooms, stainless steel & timber fitment.

Procurement officer, Stock control- ordering & store man work.

Highly experienced- in design, marking out (dumpy & laser levels) reading plans, iso’s, rl’s, pnid’s, following diagrams, fault finding, design improvement, training and quality control.

Staff management skills- including recruitment, rostering, time management and training.


Strong knowledge- in the safe use and selection of fixed plant, machinery, hand and power tools.

Excellent understanding of and commitment to workplace health and safety.

Computer skills; Experience in multiple programs, MS Word, Excel, quick books and email to name a few.

Personal Attributes:Excellent verbal, written and interpersonal communication skills.

Phenomenal time management and organisational skills with the ability to prioritise tasks and meet deadlines in high pressure work environments.

The ability to work effectively in a team environment or independently.

Able to talk to management, tradies & staff all on different levels.

Always striving to learn and apply new skills in my work.

Self motivated approach with a strong work ethic and high personal integrity

Employment History:7/2015 – 1/2016Leading hand mechanical fitter/Pipefitter: at giovenco industries at Curtis Island for Bechtel. At Gio I am a leading hand of a nine-man crew doing p&id mark-up, line identification, QA, line walk downs, diagnostics of piping vales & instrumentation throughout a functional gas plant. 4/2014 – 7/2015Mechanical Fitter/Pipe Fitter East coast Development Engineering At EDE I work in a team environment of 6-person crew building well heads.

We install double block & bleeds for the well heads under the permit system, also the construction of the well gas separator’s. This involves commissioning, iso drawings placement & fitment of pumps & pipework, hydraulic pump station, water separator, solar panels & wiring also the fencing off of the well head. This is done across a lot of different sites from Dalby to Roma.

3/2013 – 4/2014Mechanical Fitter/Pipe Fitter Leading Hand/night shift supervisorLeighton’s pty ltd, Condabri & Reedy Creek


Summary of role:At Leighton’s I am leading hand / supervisor of 20 employees, Tradesman & trades assistants. We are building a water treatment facility located at Condabri & Reedy Creek in the Surat basin.

We install Switch Room Buildings, Large Transfer Pumps, Steel work, Containment tanks & A Mammoth amount of Fiberglass pipe (GRP), Stainless steel pipe (May press) & Pvc pipe (George Fisher). Fitment of associate valves, bellows, flanges, rings, supports & cradles

This includes commissioning, Isometric drawings, RL’s, Northerlies & Easterlies. Red lining, also Redesign & mapping out of pipe work & pump position.

Achievements: Working close with management & engineering team to fix problems that arise on a day to day basis. Been Able to get the work group to work as a team. Great Safety record part of a team with 2’000’000 man hours without a lost time injury.

7/2006 – 3/2013Workshop ManagerTray Mark Industrial Caravans, Currumbin QLD

Summary of role:Tray Mark designs, manufactures and supplies industrial caravans and mining accommodation including site offices, tool rooms and lunch rooms. Clients include SANTOS, Geokinetics, Origin Energy, QLD Rail, Major Drilling, Coal Gas Camps, Savannah, Government and private sector businesses throughout QLD, NSW and SA.

As workshop Manager, I am responsible for supervising and project managing all manufacturing in the following sections; cabinet making, shop fitting, structural steel work, sheet metal, plumbing and electrical, and am employed as the Safety Officer.

Duties include:Management – Supervision of 35 full-time staff plus sub-contractors (up to 50 staff in total during peak production), relief manager in the heavy industrial section, workflow management including scheduling and production ordering.

Deadlines, rostering and training of staff, quoting of upcoming jobs and tenders.

Manufacturing – Reading of plans and client specifications, liaising with designer to make improvements and troubleshoot drawings, ordering of materials, allocating jobs to staff, assisting staff in each


section with manufacturing including welding, fabrication, plumbing and electrical.

Quality Assurance – checking completed work of tradesmen for quality fit-outs for electrical and air-conditioning, plumbing, gas-fitting, cabinets, shop-fitting, metal fabrication.

Achievements:Improved output from 14 trailers per annum to 75 trailers per annum whilst managing multiple million dollar contracts simultaneously

7/2000 – 6/2006ProprietorEzy-Bak Trailers Pty Ltd, Burleigh Heads QLD

Summary of role:Ezy-Bak Trailers was my own business which manufactured custom made trailers, car trailers and racing trailers. My role was responsible for all aspects of running a small business, manufacturing and managing a small team of fabricators.

Duties included:Manufacturing – receiving client specifications, designing of plans, quoting of jobs, metal fabrication and welding, panel beating and spray painting, fit-outs of custom trailers, quality assurance, arranging delivery of completed trailersManagement – supervising staff, managing workflow, responding to customer enquiries, business developmentHR functions – advertising and recruitment of staff, performance management, training, rostering and payroll Business administration – accounts payable and receivable, BAS, PAYG tax, superannuation, ordering of stock, stock control

Achievements:Creating a new business from inception to a highly reputable business with a repeat customer base

10/1997 – 7/2000Leading Hand / ProgrammerPrecision Cam Drives P/L & Romac Performance Products, Sumner Park QLD

Summary of role:Commencing as a programmer and then promoted to leading hand, I was responsible for the production of racing engines, differentials and gearbox components, milled from CNC machines.

Duties included:Operation and programming of CNC milling machines with Fanuc controllersSupervision and training of staff as leading hand in the workshopPreparation and maintenance of equipment to ensure precision machiningTroubleshooting and liaising with management and clients

Achievements:


Improved the efficiency of a work process and reduced work time from 45 minutes to only 4 minutes by creating a new tooling method

Referees:


Jason Rudman supervisor CB&I Kent’s 0412 657 981 Tony Jenkins superintendent Giovenco 0408932973

Clint cairns mech supervisor Giovenco 0402 573 641

Theunis boshoff mech supervisor EDE 0459 669 222

Andy Luscombe supervisor Leighton’s 0455 283 341

Shane poulter electrical supervisor tray mark 0404 016 673

Robert Bloomfield carpentry supervisor tray mark 0410 669 001


james hawkins resume (1e)

Documents