j valve jj ss valvevalve - cmd group · j & s valve improving the industry standards! giving...

2
J & S Valve ® Improving the Industry Standards! Giving More to the End Users! J & S VALVE located in Huffman, Texas, manufactures Gate Valves which “Improve the Industry Standards”. The American Wa- ter Works Association (AWWA) Standards C509 and C515 set the minimum design requirements for resilient seated gate valves. Other gate valve manufacturers strive to design their valve as close to the minimum as possible and still be in compliance with the AWWA standards. J & S manufactures with materials that exceed the minimum set out by the AWWA standards. The AWWA C509 Standard (the Standard for Resilient Gate Valves) states the minimum thickness of the body and bonnet and states that the valve can be made of cast grey iron. J & S Valve improves the standard by exceeding the minimum thickness stated in C509 and manufacturing all cast components of ductile iron (Including the body, bonnet, wedge, seal plate, and operating nut). The tensile strength of the J&S cast ductile iron is 65,000 psi with a 12% elongation property. The tensile strength of most cast grey iron is 30,000 psi with less than 1% elongation. The AWWA C515 Standard (the Standard for Reduced Wall, Resilient Seated Gate Valves) states the valve the body and bonnet shall be made of cast ductile iron except the shell thickness is nearly 45% less than the robust J&S Gate Valve. J & S feels using a material that is twice as strong and reducing the thickness of the shell by 50% does not give the end user a benefit. Our Commitment is to provide a higher quality gate valve to the water works industry is why we use a higher quality materials than the minimum required by the AWWA standards. J&S Resilient Seated Gate Valve materials include using large diameter 304 stainless steel stem, an aluminum bronze stem nut, fusion bonded epoxy coatings inside and outside, corrosive resistant bolts, and EPDM rubber components. J & S give the customers a stronger, extra heavy duty, more reliable and long lasting gate valve . In addi- tion, J&S offers the most experience in production of 72” Resilient Seated Gate Valves in the world. J&S maintain a finished goods inventory of valves 2” - 48” to service our customers like no other valve manufacturer. J&S is the complete line of AWWA Resilient and Metal Seated Gate Valves in the world - size range from 2” to 108”. 2323 1st Street Huffman, Texas 77336 Phone: 281-324-3990 Fax: 281-324-6879 Email: [email protected] Web Site: JandSValve.com PO X PO, NRS Resilient Seated Sizes: 4” - 12” Series 6500 FL X PO, NRS Resilient Seated Sizes: 4” - 12” Series 6400 FLXFL, NRS Metal Seated Sizes: 2” - 108” Series 3800 FLXFL, OS&Y Metal Seated Sizes: 2” - 108” Series 3800 FL X FL, NRS Resilient Seated Sizes: 2” - 108” Series 6800 MJ X MJ, NRS Resilient Seated Sizes: 2” - 48” Series 6900 FL X MJ, NRS Resilient Seated Sizes: 2” - 48” Series 6600 FL X FL, OS&Y Resilient Seated Sizes: 2” - 108” Series 6700 AWWA AWWA C509, C515, C500 C509, C515, C500 J & S Valve ® ® J & S Valve Sizes: 2 THRU 108 Sizes: 2 THRU 108 RESILIENT & METAL SEATED GATE VALVES R ESILIENT & M ETAL S EATED G ATE V ALVES

Upload: others

Post on 03-May-2020

1 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: J Valve JJ SS ValveValve - CMD Group · J & S Valve Improving the Industry Standards! Giving More to the End Users! J & S VALVE located in Huffman, Texas, manufactures Gate Valves

J & S Valve ®

Improving the Industry Standards! Giving More to the End Users!

J & S VALVE located in Huffman, Texas, manufactures Gate Valves which “Improve the Industry Standards”. The American Wa-

ter Works Association (AWWA) Standards C509 and C515 set the minimum design requirements for resilient seated gate valves. Other gate valve manufacturers strive to design their valve as close to the minimum as possible and still be in compliance with the AWWA standards. J & S manufactures with materials that exceed the minimum set out by the AWWA standards.

The AWWA C509 Standard (the Standard for Resilient Gate Valves) states the minimum thickness of the body and bonnet and states that the valve can be made of cast grey iron. J & S Valve improves the standard by exceeding the minimum thickness stated in C509 and manufacturing all cast components of ductile iron (Including the body, bonnet, wedge, seal plate, and operating nut). The tensile strength of the J&S cast ductile iron is 65,000 psi with a 12% elongation property. The tensile strength of most cast grey iron is 30,000 psi with less than 1% elongation.

The AWWA C515 Standard (the Standard for Reduced Wall, Resilient Seated Gate Valves) states the valve the body and bonnet shall be made of cast ductile iron except the shell thickness is nearly 45% less than the robust J&S Gate Valve. J & S feels using a material that is twice as strong and reducing the thickness of the shell by 50% does not give the end user a benefit.

Our Commitment is to provide a higher quality gate valve to the water works industry is why we use a higher quality materials

than the minimum required by the AWWA standards. J&S Resilient Seated Gate Valve materials include using large diameter 304 stainless steel stem, an aluminum bronze stem nut, fusion bonded epoxy coatings inside and outside, corrosive resistant bolts, and EPDM rubber components. J & S give the customers a stronger, extra heavy duty, more reliable and long lasting gate valve. In addi-tion, J&S offers the most experience in production of 72” Resilient Seated Gate Valves in the world. J&S maintain a finished goods inventory of valves 2” - 48” to service our customers like no other valve manufacturer. J&S is the complete line of AWWA Resilient and Metal Seated Gate Valves in the world - size range from 2” to 108”.

2323 1st Street ▪ Huffman, Texas 77336 Phone: 281-324-3990 ▪ Fax: 281-324-6879

Email: [email protected] ▪ Web Site: JandSValve.com

PO X PO, NRS Resilient Seated Sizes: 4” - 12”

Series 6500

FL X PO, NRS Resilient Seated Sizes: 4” - 12”

Series 6400

FLXFL, NRS Metal Seated

Sizes: 2” - 108” Series 3800

FLXFL, OS&Y Metal Seated

Sizes: 2” - 108” Series 3800

FL X FL, NRS Resilient Seated Sizes: 2” - 108”

Series 6800

MJ X MJ, NRS Resilient Seated Sizes: 2” - 48”

Series 6900

FL X MJ, NRS Resilient Seated Sizes: 2” - 48”

Series 6600

FL X FL, OS&Y Resilient Seated Sizes: 2” - 108”

Series 6700

AWWA AWWA

C509, C515, C500 C509, C515, C500

J & S Valve ® ® J & S Valve Sizes: 2”

THRU 108” Sizes: 2” THRU 108”

RESILIENT & METAL SEATED GATE VALVES

RESILIENT & METAL SEATED GATE VALVES

Page 2: J Valve JJ SS ValveValve - CMD Group · J & S Valve Improving the Industry Standards! Giving More to the End Users! J & S VALVE located in Huffman, Texas, manufactures Gate Valves

6/2016

2323 1st Street ▪ Huffman, TX 77336 ▪ Phone: 281.324.3990 Email: [email protected] ▪ www.JandSValve.com

Design and Materials Subject to Change Without Notice. *Call for Verification and Any Updated Drawings

Thrust Collar

Stainless Steel

Gasket Stainless Steel

Body Ductile Iron w/Bronze Seat Ring

Hand Wheel Ductile Iron

Stem Stainless Steel Stem (Other Materials, Available)

Gland Brass

Bonnet Ductile Iron Thick Wall Casting

Stem Nut Aluminum Bronze

Disc Ductile Iron Seat Ring Bronze

Nuts, Bolts, Washers Stainless Steel

Packing Graphite Non Asbestos

Iron Body, Bronze Mounted

Materials of Construction

AWWA C500

Metal Seated Solid Wedge Gate Valve

J & S Valve ®

2323 1st Street ▪ Huffman, TX 77336 ▪ Phone: 281.324.3990 Email: [email protected] ▪ www.JandSValve.com

Design and Materials Subject to Change Without Notice. *Call for Verification and Any Updated Drawings 6/2016

Thrust Collar with 2 Thrust Washers Copper

Triple O-Ring Stem Seals EPDM Replaceable Under Pressure

O-Ring Gasket EPDM

Body Ductile Iron Thick Wall Casting Fusion Bonded Epoxy Coated Inside and Out-side per AWWA C550*

2” Operating Nut Ductile Iron

Stem Stainless Steel (Other Materials Available)

Bonnet Ductile Iron Thick Wall Casting

Stem Nut Aluminum Bronze

Wedge Ductile Iron EPDM Rubber

Gland Ductile Iron Thick Wall Casting

Nuts, Bolts, Washers Stainless Steel

ANSI/NSF 61 - Certified by U/L

ANSI/NSF 61 Drinking Water

System Components MH46079

Materials of Construction

AWWA C509 & C515

Resilient Seated Solid Wedge Gate Valve

®

J & S Valve