item wise vendor directory - indian railway 03...banglore class p03cl013 50 72046120 coated carbide...

Sr. No. PLNO. DESCRIPTION Part A Vendors Part B Vendors Part C Vendors

1 Grindwell Norton Ltd. Ludhiana

Class P03CL009 2 70050041 DISH GRINDING WHEEL SIZE

152.4x12.7x31.75mm BORE AS PER DRG.NO. GW-0011 ALT.'NIL' TO SPEC. '89A46/54K5V401' OR SIMILAR.

1.Carborandum Universals Ltd. Chennai 1 Grindwell Norton Ltd. Ludhiana 2. Sterling Abrasives Limited Ahemadabad Class P03CL009

3 70050053 FLARING CUP GRINDING WHEEL SIZE 90/70x39x31.75mm BORE AS PER DRG.NO.GW-0012 ALT.'NIL' TO SPECIFICATION '89A60K5V401' OR SIMILAR.

1. Sterling Abrasives Limited Ahemadabad 2.Grindwell Norton Ltd. Ludhiana Class P03CL009

Class P03CL0094 70050077 STRAIGHT CUP GRINDING WHEEL SIZE

100x50x31.75mm BORE TO DRG.NO.GW-0014 ALT.'NIL' TO SPECIFICATION 'AA60K5V18N' OR SIMILAR.(WHITE ALLUMINUM OXIDE)

1. Sterling Abrasives Limited Ahemadabad

Class P03CL0095 70050089 STRAIGHT GRINDING WHEEL SIZE

360x39x127mm TO DRG.NO.GW-0015 1.Carborandum Universals Ltd. Chennai

Class P03CL0096 70050119 STRAIGHT RECESSED GRINDING WHEEL SIZE

300x50x127mm BORE AS PER DRG.NO.GW-0021 ALT.'NIL' TO SPECIFICATION 'AA46J8V18N' OR SIMILAR.(WHITE ALLUMINUM OXIDE)

1.Carborandum Universals Ltd. Chennai

Class P03CL0097 70050120 PLAIN GRINDING WHEEL SIZE

150x13x31.75mm BORE AS PER DRG.NO.GW-0034 ALT.'NIL' TO SPECIFICATION 'AA46K5V18N' OR SIMILAR.

1.Carborandum Universals Ltd. Chennai

Class P03CL0098 70050181 DIAMOND CUP GRINDING WHEEL SIZE

5"x1.1/2"x1.1/4"BORE AS PER DRG.NO.GW-0028 ALT.'NIL'

1. Fast Cut Diamond & Engg. Products NDLS 2.Wendt India Ltd. HOSUR 3. Anisenn Diamond Products Chennai 4. Diamond Boart International (P) Ltd. Chennai

1. Sri Tirupati Bala Ji Engg. Works Ludhiana

1. J.K Engg. Diamond Works Mumbai 2. Kay Jay Diamond Products Chennai . 3. L.M Van Mopes Diamond Tools P. LTD . Chennai Class P03CL010

1

Item Wise Vendor Directory

HOB GRINDING WHEEL SIZE 300x30/7x50.8mm BORE AS PER DRG.NO.GW-0068 ALT.'NIL' TO SPECIFICATION 'DA46H8V18N' OR SIMILAR

1.Carborandum Universals Ltd. Chennai 2. Sterling Abrasives Limited Ahemadabad

70011885

April-2011 of 63


9 70050227 FLARING CUP DIAMOND GRINDING WHEEL SIZE 3.1/2"x1.1/2"x1.1/4" AS PER DRG.NO.GW-0031 ALT.'NIL'

1. Fast Cut Diamond & Engg. Products NDLS

Class P03CL01010 70050312 DIAMOND DRESSER SIZE DIA 10mmx75mm

LONG AS PER DRG.NO.GW-0058 ALT.'Z'1. Anisenn Diamond Products Chennai 2.J.K Engg. Diamond Works Mumbai

Class P03CL0101 Grindwell Norton Ltd. Ludhiana

Class P03CL00912 70980019 RING GRINDING WHEEL SIZE 300x80x230mm

BORE TO SPECIFICATION 'C36G5BS Black Sic. in resinoid bond wire winding OR SIMILAR.

1.Carborandum Universals Ltd. Chennai 2. Grindwell Norton Ltd. Ludhiana 3.Sterling Abrasives Limited Ahemadabad Class P03CL009

1.Sterling Abrasives Limited Ahemadabad

Class P03CL009 14 70980250 ELECTROPLATED DIAMOND RADIUS

GRINDING WHEEL SIZE 200x18x31.75mm X 200 R AS PER DRAWING NO.GW-0083 ALT.'Z' SL.NO.5.

1. Fast Cut Diamond Abrasive Technologies P 2.Anisenn Diamond Products Chennai

Class P03CL01015 70980572 ELECTROPLATED DIAMOND CUP GRINDING

WHEEL CUP TYPE SIZE 250x30x31.75mm BORE AS PER DRAWING NO.GW-0077 ALT.'X' SL.NO.3.

1.Fast Cut Diamond & Engg. Products NDLS 2.J.K Engg. Diamond Works Mumbai

1. Anisseh Diamond Products Chennai

Class P03CL010

16 70980584 ELECTROPLATED DIAMOND GRINDING WHEEL CUP TYPE SIZE 250x22x31.75mm BORE AS PER DRAWING NO.GW-0077 ALT.'X' SL.NO.2.

1.Fast Cut Diamond & Engg. Products NDLS

1. Anisseh Diamond Products Chennai

1. Kay Jay Diamond Products Chennai . 2. L.M Van Mopes Diamond Tools P. LTD . Chennai Class P03CL010

17 70980596 ELECTROPLATED DIAMOND GRINDING WHEEL CUP TYPE SIZE 250x28x31.75mm BORE AS PER DRG.NO.GW-0077 ALT.'Y' SL.NO.6.

1.Fast Cut Diamond & Engg. Products NDLS

1. Anisseh Diamond Products Chennai 2.Wendt India Ltd. HOSUR

Class P03CL0101.Nippon Tools Compani Chennai

Class P03CL010

70050508

1.Anisseh Diamond Products Chennai 2.Fast Cut Diamond & Engg. Products NDLS

18 70980608 ELECTROPLATED DIAMOND GRINDING WHEEL CUP TYPE SIZE 250x15x31.75mm BORE AS PER DRG.NO.GW-0077 ALT.'X' SL.NO.1.

11

1. Grindwell Norton Ltd. Ludhiana

1.Carborandum Universals Ltd. Chennai STRAIGHT CUP GRINDING WHEEL TYPE-6, SIZE 400 X120 X 25 x 50 MM X 125 MM BORE,SPECIFICATION C36G5B85 as per Drg. No. GW-0004.

7098006813

1. Sterling Abrasives Limited Ahemadabad 2.Carborandum Universals Ltd. Chennai

STRAIGHT GRINDING WHEEL SIZE 180x20x31.75mm BORE TO SPECIFICATIONAA60K5V8 OR SIMILAR.

April-2011 of 63


19 70980627 ONE SIDE RECESSED GRINDING WHEEL DIA 250x100x134mm BORE TO SPECN.PA36-2K5V18N ROS DIA 190mm x 75 mm DEEP

1.Carborandum Universals Ltd. Ludhiana

Class P03CL009 20 72010319 HSS/ BIMETAL HAND HACKSAW BLADE SIZE

12"x1/2"x24TPIx23 SWG.OR 300 MMX 12.5 MM X 0.63 MM X24 TPI

1. Allied Saw Products Thane 2. Vardhman Engineering Surat 3. Trident Tools (P) Ltd. Chennai Class P03CL011

21 72010345 HSS POWER HACKSAW BLADE SIZE 21"x1.1/2"x6TPIx14 SWG OR 525 MM X 40 MM X 2 MM X 6TPI TO SPECIFICATION :IS-2594/77.

1. Vardhman Engg. Surat 2. Trident Tools (P) Ltd. Chennai

Class P03CL01122 72017200 ENDLESS BI-METAL BANDSAW BLADE

(COBALT M-42) SIZE 3660x1.1x32/34mmx3/4TPI (FOR LMS)

1. Bippico Industries Tools (P) Ltd NAVS 2.D.B SHAH & Brothers Kolkata 3. Miranda AMSAW (P) Ltd Ankleshwar

Class P03CL01123 72017211 ENDLESS BIMETAL BANDSAW BLADE

(COBALT M-42) SIZE 4590x1.1x32/34 mmx6 TPI HOOK TYPE (FOR ABS)

1. Bippico Industries Tools (P) Ltd NAVS

1. D.B SHAH & Brothers Kolkata 2. S.K Enterpises Chandigarh Class P03CL0111.Lenox India Pvt Ltd. Kanchipuram

Class P03CL01125 72017247 ENDLESS BIMETAL BANDSAW BLADE

(COBALT,M-42) SIZE 4928x1.1x32mmx8/12TPI HOOK TYPE

1. Bippico Industries Tools (P) Ltd NAVS 2.D.B SHAH & Brothers Kolkata

Class P03CL01126 72017624 HSS 6/5/2 H&G SLITTING SAW WITH KEYWAY

SIZE 8"x1/8"x32mm BOREx52 TEETH TO SPECN BS:122-PT-I-1953

1. KEM Tools Industries Patiala 2. Super Shine Tooling Systems (P) Ltd. Faridabad Class P03CL015

27 72019049 BROACH FOR DRIVE GEAR(LOP) (PT.NO.10140426) TO DRG.NO.TB-5 ALT.Z

1. Voltas Ltd . New Delhi ClassP03CL014

28 72030045 MICROBORE UNIT BAKUR(ITALY) CODE NO.35-70-108 OR SIMILAR

29 72030124 CARBIDE BORING INSERT ISO NO. CCMT 090308 GRADE TN4000/GC425 OR SIMILAR.

1. Ceratizit India Pvt. LTd. Kolkata 2. Kennametal India Ltd. Banglore ClassP03CL012

30 72040580 HSS H&G, TIN COATED, THREAD LS M/C TAP SIZE M16x2mm PITCH STD. AS SPECN.IS 6175: PT 3 : 1992 CLASS-6 H.

1. Addison & CO. Ludhiana

Class P03CL013

24 1. Bippico Industries Tools (P) Ltd NAVS 2.D.B SHAH & Brothers Kolkata 3. Niran Tools & Machinery Mumbai

ENDLESS BIMETAL BANDSAW BLADE (COBALT,M-42) SIZE 3910x0.9x19mmx5/8 TPI (FOR TMS)

72017229

April-2011 of 63


31 72040628 HSS,H&G, TIN COATED,THREAD LONG SHANK M/C TAP SIZE M36X4MM PITCH AS PER SPECN. IS 6175: PT 4 : 1991

1. Addison & Co. Ltd Chennai 2. Forbes Gokkak Ltd. New Delhi

Class P03CL01332 72040646 HSS H&G , TIN COATED,THREAD M/C TAP

SIZE M20x2.5mm AS PER SPECN.IS 6175: PT 4 : 1991

1. Hittco Tools LTd. Banglore 1. Addison & Co. Ltd Ludhiana


SIZE M24x3mm AS PER SPECN.IS 6175: PT 4 : 1991

1. Addison & Co. Ltd Ludhiana

Class P03CL01334 72042590 HSS,H&G, TIN COATED,SHORT M/C TAP SIZE

1/4"-20 UNC-3B STD AS PER SPECN. BS 949:PART2:1979.

1. Hittco Tools LTd. Banglore 2. Zenith Birla (India ) Ltd Ludhiana.

1. Addison & Co. Ltd Ludhiana 2.Jeevan Deep Tool Industry Patiala Class P03CL013

35 72042620 HSS H&G , TIN COATED,THREAD M/C TAP 5/16"-18UNC-3B STD. AS PER SPECN.BS 949 : PART 2:1979.

1. Zenith Birla (India ) Ltd Ludhiana. 2. Hittco Tools LTd. Banglore 3. Addison & Co. Ltd Ludhiana 4. Jeevan Deep Tool Industry Patiala Class P03CL013

36 72042655 HSS H&G , TIN COATED,THREAD M/C TAP SIZE 3/8"-16UNC-3B STD AS PER SPECN.BS 949 : PART 2:1979.

1. Zenith Birla (India ) Ltd Ludhiana. 2. Addison & Co. Ltd Ludhiana 3.Hittco Tools LTd. Banglore

Class P03CL01337 72042709 HSS H&G , TIN COATED,THREAD THREE

FLUTED M/C TAP SIZE 1/2"-13UNC-3B STD AS PER SPECN.BS 949 : PART 2:1979. Note: The Tap should be able to produce min. 6 Nos. F.D. Gear Material D81440 on CNC Drill M/C with 50 RPM at the feed of 1.954 mm/Rev.

1. Zenith Birla (India ) Ltd Ludhiana. 2. Addison & Co. Ltd Ludhiana

Class P03CL01338 72042760 HSS,H&G , TIN COATED,THREAD M/C TAP

SIZE 5/8"-11UNC-3B STD. AS PER SPECN. BS 949:PART I :1992

1. Zenith Birla (India ) Ltd Ludhiana. 2. Hittco Tools LTd. Banglore

Class P03CL01339 72042795 HSS H&G THREAD M/C TAP SIZE 3/4"-10UNC-

3B STD AS PER SPECN.BS:949-1969.1. Zenith Birla (India ) Ltd Ludhiana. 2. Addison & Co. Ltd Ludhiana Class P03CL013

40 72042813 HSS H&G, TIN COATED, THREAD M/C TAP SIZE 7/8"-9UNC-3B STD. AS PER SPECN.BS 949 : PART 2:1979.

1. Addison & Co. Ltd Ludhiana 2. Zenith Birla (India ) Ltd Ludhiana.

1. Hittco Tools LTd. Banglore

Class P03CL01341 72042850 HSS H&G, TIN COATED, THREAD EX.LONG

M/C TAP SIZE 1"-8UNC-3B x 8"OAL AS PER SPEC.BS 949 : PART 2:1979.


Class P03CL013

April-2011 of 63


42 72042874 HSS H&G , TIN COATED,THREAD M/C TAP SIZE 1.1/8"-12UNF-3B SHANK DIA 22mm. SQ.SIZE 17mm SQ.LENGTH 20mm, 127mm OAL AS PER SPECN.BS 949 : PART 2:1979.


1. Forbes Kokkal Ltd. New Delhi

Class P03CL01343 72042898 HSS H&G, TIN COATED, THREAD SPL M/C TAP

1.1/8"-12UNF-5B,THREAD LENGTH 40mm,SH.DIA 20mm, SQ.LENGTH 20mm,SQ.SIZE16mm,142mmOAL,MAJ.DIA 1.1315"/1.1335,"PITCH DIA 1.0709"/1.0704" FOUR FLUTED SPECN.BS 949 : PART 2:1979.



SIZE 1.1/4"-12UNF-3B STD AS PER SPECN:BS 949:PART-2:1992.



SIZE 1.3/8"-12UNF-3B STD (BOTTOMING) AS PER SPECN. BS 949 : PART 2:1992.


Class P03CL01346 72044238 HSS H&G, TIN COATED, THREAD M/C TAP

SIZE 1.1/2"-12UNF-3B STD AS PER SPECN.BS 949 : PART 2:1979.

No Records


SIZE 5/8"-18UNF-3B STD AS PER SPECN.BS 949 : PART 2:1992. Class P03CL013

48 72044408 HSS H&G , TIN COATED,THREAD M/C TAP SIZE 7/8"-14UNF-3B STD AS PER SPECN.BS 949 : PART 2:1992.REQUIRED FOR TAPPING IN NUT CON ROD PART NO. 10211070


Class P03CL01349 72045103 HSS H&G , TIN COATED,THREAD NON SERIAL

SHORT M/C TAP SIZE 1/2"-14NPT STD (BOTTOMING) AS PER SPECN.BS:949-1969.

1. Addison & Co. Ltd Ludhiana 2. Hittco Tools LTd. Banglore

Class P03CL01350 72046120 COATED CARBIDE TURNING INSERT CNMG

120412 GRADE PM 4025 / TN 1500 OR SIMILAR.1. SECO Tools India P Ltd. Pune 2. Kennametal India Ltd . Banglore

Class P03CL01251 72046259 THROWAWAY TC TURNING INSERT ISO NO.

CNMG 190616 GRADE TN4000 /GC435 OR SIMILAR. C240

1. Kennametal India Ltd . Banglore 2. SECO Tools India P Ltd. Pune 3. Ceratizit India Pvt Ltd Kolkata 4.Taegutec India P Ltd . Banglore

Class P03CL01252 72046600 HSS H&G, THREAD NON SERIAL SHORT M/C

TAP SIZE 1/8"-27 NPT STD (BOTTOMING) AS PER SPECN.BS:949-1969. Class P03CL013

April-2011 of 63


53 72046636 HSS H&G , TIN COATED,THREAD NON SERIAL SHORT M/C TAP 1/4"-18NPT STD (BOTTOMING) AS PER SPECN.BS:949-1969.

1. Hittco Tools LTd. Banglore 2. Mechaids Tools Delhi

Class P03CL01354 72046685 SPECIAL HELICAL CAM MILLING CUTTER

BODY DIA 6" AS PER DRAWING M-0023R ALT.'NIL' SL.NO.1. Class P03CL015

55 72046703 WEDGE FOR HELICAL CAM MILLING CUTTER AS PER DRAWING NO.M-0023R ALT.'NIL' SL.NO.3.(EACH SET CONSISTS OF 12 NOS. WEDGE) Class P03CL015

56 72046717 HSS H&G , TIN COATED,THREAD NON SERIAL SHORT M/C TAP SIZE 3/4"-14NPT STD (BOTTOMING) AS PER SPECN.BS:949-1969.

1. Zenith Birla (India ) Ltd Ludhiana. 2 Addison & Co. Ltd Ludhiana



SHORT M/C TAP SIZE 1"-11.1/2NPT STD (BOTTOMING) AS PER SPECN.BS:949-1969.



SHORT M/C TAP SIZE 3/8"-18 NPT AS PER BS:949-1969. Class P03CL013

59 72047148 SHELL LOCK MILLING CUTTER SIZE DIA 3"xWIDTH 0.450"xBORE 5/8" AS PER DRAWING NO.M-0034 ALT.'Z'

1. Sunrise Tooling Systems P Ltd Faridabad Class P03CL015

60 72047161 KEYWAY SEATING MILLING CUTTER ASSEMBLY AS PER DRAWING NO. AC-0006 ALT.'Z'(TWO SHEETS)

1. Super Shine Tools New Delhi

Class P03CL01561 72060013 THREAD ROLL SIZE 7/8"-14NFAS PER SL.NO.6.

OF DRAWING NO.TT-0006 ALT.'U' 1. Chhajju Singh & Sons Ludhiana

1.Tool groove Hyderabad Class P03CL018

62 72060025 DAVIS BLOCK CUTTER NO.G6E-525 AS PER DRAWING NO.M-0071 ALT.'Z' (FOR CAM BORE ENLARGING)


Class P03CL01563 72060037 DAVIS BLOCK CUTTER NO.G4E-875 AS PER

DRAWING NO.M-0073 ALT.'Y' (FOR CRANK BORE) Class P03CL015

64 72060049 DAVIS BLOCK CUTTER NO.G6E-450 AS PER DRAWING NO.M-0072 ALT.'Z' (FOR CAM BORING) Class P03CL015

April-2011 of 63



Class P03CL01566 72060074 DAVIS BLOCK CUTTER DIA 10.500" - 11.310" AS

PER DRAWING NO. M-0085 ALT.'Z' SL.NO.1 (FOR 45^ CHAMFERING OF MAGNET FRAME AXLE BORE)

1. Sunrise Tooling Systems P Ltd Faridabad 2. Super Shine Tools New Delhi Class P03CL015

67 72060104 HSS H&G STRAIGHT TEETH SIDE & FACE CUTTER SIZE 11.110"x1"x4"BORE KEYWAY WIDTH 1" AS PER SPECN.BS:122-PT.I-1953.OR IS :6308-1982

1. Supershine Tools New Delhi

Class P03CL01568 72060128 HSS SERRATION MILLING CUTTER AS PER

DRAWING NO.M-0001 ALT.'X' FOR ENGINE BLOCK.

1. Voltas Ltd New Delhi Mitsubishi Ranipet

1. S S Tools Patiala

Class P03CL01470 72060153 GEAR HOB AS PER DRG. NO. M-0129 ALT. 'Z' 1. Dagger Forst P Ltd Pune

Class P03CL01471 72060160 HSS HIGH POWER CYLINDERICAL CUTTER

SIZE DIA 11"XWIDTH 4.1/4"xBORE 4"AS PER DRAWING NO.M-0088 ALT.'NIL'

1. Supershine Tools New Delhi

Class P03CL01572 72060189 GEAR HOB AS PER DRG. NO. M-0134. 1. Dagger Forst Tools LTd. Thane

2. ESGI Tools & Instuments Patiala 3. SS Tools Patiala 4. Ferromet Tools Patiala Class P03CL014

73 72077755 EXTERNAL THREADING TOOL TO SANDVIK NO. IND-2R-60^-2525-P30 OR SIMILAR. Class P03CL012

74 72078182 FORM TOOL FOR EQUALIZER SPRING SEAT(MG&BG) AS PER DRG.NO.TF-0029 ALT.'

1. Sunrise Tooling Systems P Ltd Faridabad

Class P03CL01575 72078224 FORM TOOL FOR GEAR CRANK SHAFT (R.H.)

AS PER DRAWING NO.TF-0033 ALT.'NIL'1. Sunrise Tooling Systems P Ltd Faridabad 2. Bahl Engineers Chandigarh 3. Dies & Tools Ltd. Kolkata. 4. .Supershine Tools New Delhi

Class P03CL015

69 1. ESGI Tools & Instuments Patiala HSS TIN COATED SOLID GEAR HOB FOR IMPELLER GEAR (PT.NO.10212383&10211780) MODULE 9.128mm AS PER DRAWING NO.M-0105 ALT.'NIL'

72060141


DAVIS BLOCK CUTTER DIA 268.69mm AS PER DRAWING M-0074 ALT.'NIL' (FOR THRUST FACING)

7206005065

April-2011 of 63


76 72078273 GROOVING FORM TOOL FOR LOCK SPRING SEAT AS PER DRAWING NO.TF-0085 ALT.'Z'

1 KEM Tools Industries PatialaClass P03CL015

77 72078455 TC TIPPED BORING TOOL FOR PUSH ROD END AS PER DRAWING NO.TF-0084 ALT.'Z' Class P03CL015

78 72080565 HSS H&G PS EL DRILL SIZE 1/8"x8"FLx12"OAL AS PER SPECN.IS:7823-1983

1. Hittco Tools LTd. Banglore 2. Addison & Co. Ltd Ludhiana

Class P03CL01379 72080620 HSS H&G PS EL TWIST DRILL SIZE

3/16"x9"FLx12"OAL AS PER SPECN.IS:7823-1983. Class P03CL013

80 72080863 HSS H&G PS TWIST DRILL SIZE 6.9mm X 225 MM CEL x275mm OAL AS PER SPECN.IS 7823-1983

1. Addison & Co. Ltd Ludhiana 2. Zenith Birla (India ) Ltd Ludhiana. 3. Hittco Tools LTd. Banglore

Class P03CL01381 72083542 HSS, M-35 H&G TS EL TWIST DRILL

3/16"x7"FLx10.1/4"OAL AS PER SPECN.IS 7822-1983.

1. Addison & Co. Ltd Chennai 2. Hittco Tools LTd. Banglore

Class P03CL01382 72083566 HSS H&G TS EL TWIST DRILL SIZE

1/4"x9"FLx12.1/4"OAL AS PER SPECN.IS 7822-1983.


Class P03CL01383 72083657 HSS, M-35 H&G TS EL TWIST DRILL SIZE

3/8"x7.1/16"FLx10.1/4"OAL AS PER SPECN.IS 7822-1983.


Class P03CL01384 72083670 HSS H&G TS EX.LONG TWIST DRILL SIZE

7/16"X9.13/16"FL X13"OAL AS PER SPEC:IS 7822-1983. Class P03CL013

85 72083694 HSS H&G TS EX.LONG TWIST DRILL SIZE 31/64"x8.13/16"FL.X12"OAL AS PER SPEC.IS 7822-1983.



1/2"X12"FL X16"OAL MT-1 AS PER SPEC IS 7822-1983



9/16"X12.1/8"FLX16"OAL MT-2 AS PER SPEC IS 7822-1983.



17/32"X8"FL.X 12"OAL MT-I AS PER SPEC:IS 7822-1983.



23/32"X12"FLX18"OAL AS PER SPEC:IS 7822-1983.


Class P03CL013

April-2011 of 63


90 72083803 HSS H&G TS EX.LONG TWIST DRILL SIZE 7/8"X10"FLX14.3/4"OAL MT-2 AS PER SPEC:IS-7822-1983

1. Birla Precison Technologies Ltd. Ludhiana


1.7/8"X15.1/8"FLX21"OAL. AS PER SPEC: IS 7822-1983.

1. Addison & Co. Ltd Chennai

Class P03CL01392 72086932 CARBIDE LUGGED GUN DRILL DULY 19.05 MM

FINISHED TO DRG.NO.TD-OOO4/4 ALT.'X' .1.Kennametal India Ltd . Banglore

Class P03CL01693 72086981 CARBIDE TIPPED BRAZED GUN DRILL TO

DRG.NO.TD-0015 ALT.'Z' SIZE 12.7mmx1150mm OAL. GRADE TH-20. Note: The Gun Drill should be able to produce min. 20 Nos. Con. Rod Material D31PD51200 on Gun Drill M/C with 1500 RPM at the feed of 10 mm/Min.

1.Kennametal India Ltd . Banglore

Class P03CL01694 72087390 HSS CENTER DRILL SIZE 3/16"x7/16" AS PER

SPEC:BS:328-PT.II-1950.OR IS 6708-1977. 1. Addison & Co. Ltd Chennai1. 2. Zenith Birla (India ) Ltd Ludhiana. 3. Kem Tools Industry Patiala 4. Jeevan Deep Tool Industry Patiala Class P03CL013

95 72087412 HSS H&G CENTER DRILL SIZE 1"BODY DIAx0.397"PILOT DIA x14.2 mm pilot length x103 mm OAL AS PER SPECN.BS:328-PT.II-1950.OR IS 6708-1977.

1. Addison & Co. Ltd Chennai 2. Hittco Tools LTd. Banglore 3. Jeewan deep Tool Industry Patiala

Class P03CL01396 72088734 HSS H&G TS PARALLEL M/C REAMER SIZE DIA

1.1/4" X CEL 7.3/4" X OAL 12.3/8" (STD) AS PER SPEC:BS 328:PT.4:1983 OR IS 5445-1978.


Class P03CL01397 72088795 HSS TS H&G M/C REAMER SIZE DIA

1.1/2"(STD) AS PER SPEC:BS 328:PT.4:1983.OR IS 5445-1978


Class P03CL01398 72088879 HSS H&G HEXAGONAL PUNCH SIZE 3/16" TO

DRG.NO.D-0056 ALT.'Z' SL.NO.1.1. Sunrise Tooling Systems P Ltd 2.Supershine Tools New DelhiFaridabad

Class P03CL01599 72089271 HSS H&G TS PARALLEL M/C REAMER SIZE

1.062"/1.061" STD AS PER SPECN.BS 328:PT.4:1969.OR IS 5445-1978.

No Records

Class P03CL013100 72089456 HSS H&G TS M/C REAMER SIZE DIA

0.3750"/0.3755" STD AS PER SPECN.BS 328:PT.4:1983.OR IS 5445-1978 Class P03CL013

April-2011 of 63


101 72089507 HSS, H&G PS DRILL DIA 17/64"STD AS PER SPECN.BS 328:PART 1:1986.IS 5101-1991.

1. Addison & Co. Ltd ChennaiClass P03CL013

102 72094965 HSS H&G THREAD LONG SHANK M/C TAP SIZE M12x1.75mm STD AS PER SPECN.IS 6175: PT. 4:1991.


Class P03CL013103 72096020 BORING BAR ADAPTOR FOR DAVIS BLOCK

CUTTER FOR G&L M/C AS PER DRAWING NO.AC-0086 ALT.'Y'.


Class P03CL015104 72107224 HSS H&G , TIN COATED,NON SERIAL SHORT

M/C TAP SIZE 1/4"-18NPTx150mmOAL (BOTTOMING) AS PER SPECN.BS:949-1969.

1. Zenith Birla (India ) Ltd Ludhiana.

Class P03CL013105 72107236 HSS H&G , TIN COATED,THREAD Ex.LONG M/C

TAP SIZE 5/16"-18 UNC-3Bx6"OAL AS PER SPECN.BS:949-PT.II-1979.


Class P03CL013106 72107256 HSS H&G, TIN COATED,THREAD Ex.LONG M/C

TAP SIZE 1/2"-13UNC-3Bx6"OAL AS PER SPECN.BS:949-PT.II-1979.


Class P03CL013107 72107270 HSS H&G , TIN COATED,THREAD EX.LONG

M/C TAP SIZE 5/8"-18UNF-3Bx8"OAL AS PER SPECN.BS:949-PT.II-1979.


Class P03CL013108 72107285 HSS H&G , TIN COATED, EX.LONG M/C TAPS

SIZE 3/4"-14NPT x10.1/4"OAL AS PER SPECN.BS:949-1969.


Class P03CL013109 72107300 HSS H&G , TIN COATED,THREAD EX.LONG

M/C TAP SIZE 7/8"-14UNF-3Bx8"OAL AS PER SPECN.BS 949 : PART 2:1979. Note: The Tap should be able to produce min. 8 Nos. Crank Shaft Gear Material AISI 86B45 on Radial Drill M/C with 50 RPM at the feed of 1.954 mm/Rev.


Class P03CL0131. J.K Tools & Industries Patiala

Class P03CL015111 72130404 SCRRAPPING TOOL AS PER DRG.NO.TF-0079

ALT.'Q' SL.NO.1.1 .Supershine Tools New Delhi 2.J.K Tools & Industries Patiala Class P03CL015

112 72130430 SCRAPPING TOOL AS PER DRG.NO.TF-0079 ALT.'Q' SL.NO.3.

1 KEM Tools Industries Patiala 2.Supershine Tools New Delhi


1 KEM Tools Industries Patiala TUBULAR RAM AS PER DRG.NO.ET-0177 ALT.'X' REF.NO.17.I D 1.8 mm

72130260110

April-2011 of 63


113 72130441 SCRAPPING TOOL AS PER DRG.NO.TF-0079 ALT.'Q' SL.NO.4.

1 KEM Tools Industries Patiala 2.Supershine Tools New Delhi


114 72150725 BACK SPOT FACE CUTTER SIZE DIA 1.1/8"xWIDTH 3/4"xBORE 1/2" AS PER DRG.NO.M-0033 ALT.'Y' SL.NO.6 WITHOUT `ARBOR'.


Class P03CL015115 72150907 INTERLOCK CUTTER AS PER DRG.NO.M-0002

ALT.'Z'. Note: The Iner lock Cutter should be able to produce min. 30 Nos. Con. Rod Material D31PD51200 on H. Milll M/C with 35.5 RPM at the feed of 20 mm/Min.

1 KEM Tools Industries Patiala

Class P03CL015116 72151330 HSS H&G STRAIGHT TEETH SIDE & FACE

CUTTER SIZE DIA 5"xWIDTH 0.252"/0.253"xBORE 27mm AS PER SPECN.BS:122-PT.I-1953.OR .IS : 6308 -1982. Class P03CL015

117 72151511 HSS H&G STRAIGHT TEETH SIDE & FACE CUTTER SIZE DIA 8"xWIDTH 1"xBORE 32mm AS PER SPECN.BS:122-PT.I-1953.OR .IS : 6308 -1982.

1. Zenith Birla India Ltd Ludhiana

Class P03CL015118 72168610 CAM MILLING CUTTER BLADE AS PER

DRG.NO.M-0023R ALT.'NIL' SL.NO.2.No Records Available

Class P03CL015119 72168614 HSS H&G CONVEX MILLING CUTTER GROUND

RELIEVED SIZE DIA 2.1/4"xWIDTH 1/8"x27mm BORE AS PER SPECN.BS:122-PT.I-1953.OR IS 6323-1982

1 KEM Tools Industries Patiala


RELIEVED SIZE DIA 2.1/4"xWIDTH 3/16"xBORE 27mm AS PER SPECN.BS:122-PT.I-1953.OR IS 6323-1982

1.KEM Tools Industries Patiala 1. Sunrise Tooling Systems P Ltd Faridabad


RELIEVED SIZE DIA 6"x 7/16"x BORE 32mm AS PER SPECN.BS:122-PT.I-1953.OR IS 6323-1982

No Records Available 1. Sunrise Tooling Systems P Ltd Faridabad

1. Super Tools Corp. Patiala

Class P03CL015

122 No Records AvailableHSS H&G PS END MILL CUTTER DIA 5/16" STD AS PER SPECN.IS:6353-1991.OR BS 122 : PT.1:1953

72187050

April-2011 of 63


123 72187075 HSS H&G PS END MILL CUTTER SIZE DIA 40mm x 70 MM CEL X 190 MM. OAL. AS PER SPECN.IS:6353-1991.SH DIA. 32 MM. X80 MM.SH LENGTH WITH 3MM X3MM X45^ CORNER CHEMFER. Note: The PS End Mill Cutter should be able to produce min. 200 Nos. Eq. Spring Seat Material Cast Steel D10011on HEC. M/C with 150 RPM at the feed of 15 mm/Min.

1. Addison & Co Ltd Chennai 1. Sunrise Tooling Systems P Ltd Faridabad

Class P03CL015124 72187517 HSS H&G PS END MILL CUTTER SIZE DIA

0.495"x0.5"SHANK DIA AS PER SPECN.BS:122-PT.I-1953.OR IS 6353 -1991

1. Super Tools Corp. Patiala

Class P03CL015125 72187621 CARBIDE TIP BRAZED LONG EDGE MILLING

CUTTER SIZE DIA 50mmx85mm CEL AS PER SL NO. 1 OF DRG.NO.M-0113 ALT.'NIL'. Note: The Carbide Tip Brazed Long Edge Milling Cutter should be able to produce min. 20 Nos. Eq. Beam Material IS 2062 onCopy Milling M/C with 237 RPM at the feed of 70 mm/Min.

1. Supershine Tools New Delhi 2. BAHL Engrs-Chandigarh 3. Sunrise Tooling Systems P Ltd Faridabad

Class P03CL015126 72200060 HSS H&G LONG SERIES PS TWIST DRILL SIZE

DIA 1/8"x4.3/16"OAL AS PER SPECN.BS 328-PT.I-1986 OR IS 5102-1969

1. Hittco Tools LTd. Banglore 2. Zenith Birla (India ) Ltd Ludhiana.

Class P03CL013127 72200080 HSS H&G CENTRE DRILL SIZE BODY DIA

5/16"x1/8"PILOT DIA x60^ AS PER SPECN.BS:328-PT.II-1950.OR IS 6708-1977.

1. Hittco Tools LTd. Banglore 2. Zenith Birla (India ) Ltd Ludhiana. 3.KEM Tools Industries Patiala Class P03CL013

128 72202269 HSS H&G PS TWIST DRILL SIZE DIA 3/32" STD AS PER SPECN.BS 328-PT.I:1986.OR IS 5101:1991.

1. Zenith Birla (India ) Ltd Ludhiana. 2. Hittco Tools LTd. Banglore 3. Addison & Co. Ltd Ludhiana

4.Miranda Tools Ankleshwer

Class P03CL013129 72202506 HSS, M-35, H&G PS TWIST DRILL SIZE DIA

1/16" STD AS PER SPECN.BS:328-PT.I-1986.OR IS 5101:1991

1. Hittco Tools Ltd Banglore

Class P03CL013130 72202646 HSS H&G PS TWIST DRILL SIZE DIA 1/8" STD

AS PER SPECN.BS:328-PT.I-1986.OR IS 5101:1991

1. Addison & Co. Ltd Ludhiana 1. Miranda Tools Ankleshwer

Class P03CL013131 72202713 HSS H&G PS TWIST DRILL DIA 3.9 mm STD AS

PER SPECN.IS:5101-1991 OR BS 328:PT.1:1986 1. Addison & Co. Ltd Ludhiana

Class P03CL013132 72202725 HSS H&G PS TWIST DRILL SIZE DIA 4.00mm

STD AS PER SPECN.IS:5101-1991.OR BS 328:PT.1:1986


Class P03CL013

April-2011 of 63


133 72202749 HSS H&G PS TWIST DRILL SIZE DIA 4.20mm STD AS PER SPECN.IS:5101-1991.OR BS 328:PT.1:1986

1. Hittco Tools LTd. Banglore 1. Miranda Tools Ankleshwer


STD AS PER SPECN.IS:5101-1991OR BS 328:PT.1:1986.

1. Addison & Co. Ltd Ludhiana 2. Zenith Birla (India ) Ltd Ludhiana. 3. Hittco Tools LTd. Banglore Class P03CL013

135 72202932 HSS H&G PS TWIST DRILL SIZE DIA 4.70mm STD AS PER SPECN.IS:5101-1991OR BS 328:PT.1:1986.

1. Miranda Tools Ankleshwer

Class P03CL013136 72202982 HSS H&G PS TWIST DRILL SIZE DIA 6.1 mm

STD AS PER SPECN.IS:5101-1991OR BS 328:PT.1:1986.



STD AS PER SPECN.IS:5101-1991OR BS 328:PT.1:1986. Class P03CL013


Class P03CL013139 72206500 HSS H&G TS TWIST DRILL SIZE DIA 15/32" STD

AS PER SPECN.BS 328-PT.I-1986..OR IS 5103-1969


Class P03CL013140 72206524 HSS H&G TS TWIST DRILL SIZE DIA 1/2" STD.

AS PER SPECN.BS 328:PT.I:1986.OR IS 5103-1969


Class P03CL013141 72206532 HSS H&G LONG SERIES TS TWIST DRILL SIZE

DIA 23/64"X CEL 107 mm X 188 MM OAL AS PER SPECN.IS:8305-1976.

1. Addison & Co. Ltd Ludhiana 2. J.K Files Thane Class P03CL013

142 72206548 HSS,M-35,H&G TS TWIST DRILL SIZE DIA 17/32" STD AS PER SPECN.BS:328-PT.I-1986.OR IS 5103-1969


Class P03CL013143 72206639 HSS, H&G TS TWIST DRILL SIZE DIA 11/16"

STD AS PER SPECN.BS:328-PT.1-1986.OR IS : 5103 : 1969. Note: The HSS, H&G TS Twist Drill size Dia 11/16" STD should be able to produce min. 25 Nos. Lifter X Head Material AISI A 8640 on HMC Praga M/C with 225 RPM at the feed of 35 mm/Min.

1. Zenith Birla (India ) Ltd Ludhiana. 2. Addison & Co. Ltd Ludhiana 3. Hittco Tools LTd. Banglore

Class P03CL013


HSS H&G TS TWIST DRILL SIZE DIA 7/16"STD AS PER SPECN.BS 328 : PART.I :1986.OR IS 5103-1969

72206482138

April-2011 of 63


144 72206690 HSS, M-35, H&G TS TWIST DRILL SIZE DIA 3/4" STD AS PER SPECN.BS:328-PT.I-1986.OR IS : 5103 : 1969



AS PER SPECN.BS:328-PT.I-1986.OR IS : 5103 : 1969 Class P03CL013

146 72206755 HSS , M-35,H&G TS TWIST DRILL SIZE DIA 13/16" STD AS PER SPECN.BS:328-PT.I-1986.OR IS : 5103 : 1969. Note: The HSS, M-35, H&G TS Twist Drill size Dia 13/16" STD should be able to produce min. 30 Nos. Outer Ring Material D54190 on R. Drill M/C with 80 RPM at the feed of 1.5 mm/Rev..



AS PER SPECN. IS 5103 - 1969 1. Addison & Co. Ltd Ludhiana 2. Zenith Birla (India ) Ltd Ludhiana. Class P03CL013

148 72206949 HSS H&G TS TWIST DRILL SIZE DIA 1" STD AS PER SPECN. IS : 5103 : 1969

1. Addison & Co. Ltd Ludhiana Class P03CL013

149 72207000 HSS H&G TS TWIST DRILL SIZE DIA 1.1/16" STD AS PER SPECN.BS:328-PT.I-1986.OR IS : 5103 : 1969


Class P03CL013150 72207024 HSS H&G TS TWIST DRILL SIZE DIA 1.1/32"

STD AS PER SPECN.BS:328-PT.1-1986.OR IS : 5103 : 1969


Class P03CL013151 72207053 HSS H&G TS TWIST DRILL SIZE DIA 1.1/8" X

CEL 9.7/8" X OAL 14.5/8" STD AS PER SPECN. IS : 7822 : 1983



STD AS PER SPECN.BS 328-PT.I:1986 OR IS : 5103 : 1969

No Records Available

Class P03CL013153 72207112 HSS, M-35, TS TWIST DRILL SIZE DIA 1.1/4"

OR 31.75 MM STD AS PER SPECN.BS 328:PT.I:1986.OR IS 5103 - 1969


Class P03CL013154 72207172 HSS H&G TS TWIST DRILL SIZE DIA 1.3/8" STD

AS PER SPECN.BS:328-PT.I-1986.OR IS : 5103 : 1969



STD AS PER SPECN.BS:328-PT.I-1986.OR IS : 5103 : 1969


Class P03CL013

April-2011 of 63


156 72207436 HSS H&G TS TWIST DRILL SIZE DIA 2.1/4" STD AS PER SPECN.BS:328-PT.I-1986 OR IS : 5103 : 1969



XCEL 13" X OAL 20.3/8" AS PER SPECN.BS:328-PT.I:1986.OR IS 5103 - 1969


Class P03CL013158 72208785 HSS H&G TS TWIST DRILL DIA 14mm STD AS

PER SPECN.IS:5103-1969.BS 328:PART 1:19861. Addison & Co. Ltd Ludhiana

Class P03CL013159 72244677 HSS H&G SIDE & FACE CUTTER SIZE DIA

10"xWIDTH 7/8"xBORE 32mm AS PER SPECN.BS:122-PT.I-1953.OR .IS : 6308 -1982.


Class P03CL015160 72244797 HSS H&G THREAD EX.LONG M/C TAP SIZE 1/2"-

13UNC-3Bx180mm OAL AS PER SPECN.BS:949-PT.II-1979.


Class P03CL013161 72245049 HSS 18:4:1 H&G CONVEX CUTTER SIZE DIA

127 MMx44.45 MM WIDTHx32mm BORE AS PER DRG.NO M-0118 ALT. 'Z'. Class P03CL015

162 72245085 SOLID CARBIDE SLITTING SAW SIZE OD 17mmxID 7mmxTHICK 1.5mmx NO. OF TEETH 18-20. DRY NO M-109 / REV , SR NO 1

1. Sunrise Tooling Systems P Ltd Faridabad 2.Supershine Tools New Delhi Class P03CL015

163 72245097 MICA UNDER CUTTER AP PER Drg. No. M-109/R Sr. No. 2.

1. Sunrise Tooling Systems P Ltd Faridabad 2.Supershine Tools New Delhi

Class P03CL015164 72245177 CARBIDE TIP BRAZED SINGLE POINT TOOL

ISO 2R-2525 GRADE P30.1. Dies & Tools Ltd Kolkatta

Class P03CL015165 72245256 CABIDE TIP BRAZED SINGLE POINT ISO

PARTING TOOL 7R-2516 GRADE P30.1. Dies & Tools Ltd Kolkatta

Class P03CL015166 72245268 CRBIDE TIP BRAZED SINGLE POINT TOOL ISO

9R-2525 GRADE P30.1. Dies & Tools Ltd Kolkatta 1.Supershine Tools New Delhi

Class P03CL015167 72245281 CABIDE TIP BRAZED SINGLE POINT ISO TOOL

9R-1616 GRADE P30.1. Dies & Tools Ltd Kolkatta

Class P03CL015168 72245293 CARBIDE TIP BRAZED SINGLE POINT ISO

TOOL 9R-1010 GRADE P30.1. Dies & Tools Ltd Kolkatta

Class P03CL015169 72245311 CARBIDE TIP BRAZED SINGLE POINT TOOL

ISO 5R-2525 GRADE P30.1. Dies & Tools Ltd Kolkatta

Class P03CL015170 72245636 CARBIDE TIPPED CUTTER FOR TIG WELDING

M/C AS PER DRG.NO.M-0041 ALT.'NIL'.1. Kennmetal India Ltd Banglore 2. Super shine Tools New Delhi

Class P03CL015

April-2011 of 63


171 72245648 CARBIDE BORING INSERT ISO NO.TCMT 16T308 GRADE GC425/TN2000 OR SIMILAR.

1. Kennmetal Widia India Ltd Banglore 2. Taegutec India (P) Ltd. Banglore Class P03CL012

172 72245860 CARBIDE MILLING INSERT ISO NO.TPKN 2204 PDR GRADE GC425/TN2000 OR SIMILAR.

1. Kennmetal India Ltd Banglore

Class P03CL012173 72245924 CARBIDE INSERT ISO NO. LNCX 1806 AZR -11

GRADE TN35M/GC-235 OR SIMILAR1. Kennmetal Widia India Ltd Banglore

Class P03CL012174 72245996 CARBIDE TIPPED EXPANDABLE BLADE AS

PER DRG.NO.HMS/PAMA/001 ALT.`V'1. Sunrise Tooling Systems P Ltd Faridabad 2.Supershine Tools New Delhi Class P03CL015

175 72245998 HSS EXPANDABLE CUTTER BLADE AS PER DRG.NO.HMS/PAMA/002 ALT.'W'.


176 72246000 CARBIDE TIPPED EXPANDABLE CUTTER BLADE TO DRG.NO.HMS/PAMA/003 ALT.'Z'.

1. Sunrise Tooling Systems P Ltd Faridabad 2. Dies & Tools Ltd Kolkatta Class P03CL015

177 72246012 SHSS EXPANDABLE CUTTER BLADE AS PER DRG.NO.HMS/PAMA/004 ALT.'X'.


1. Dies & Tools Ltd Kolkatta

Class P03CL017178 72246084 CARBIDE TURNING INSERT CNMG 120408

GRADE PM-4025 OR SIMILAR. Note: The Carbide Turning Insert CNMG 120408 Grade PM-4025 should be able to produce min. 150 Nos. Cam Roller Material HR Steel D93062 on EMCO M/C with 2200 RPM at the feed of 0.01 mm/Rev..

1. Taegutec India (P) Ltd. Banglore 2. Kennmetal India Ltd Banglore 2.Seco Tools (P) Ltd Pune

Class P03CL012179 72246100 CARBIDE BORING INSERT ISO NO.CCMT

060204 GRADE GC425/TN4000 OR SIMILAR.1. Kennmetal India Ltd Banglore 2.Seco Tools (P) Ltd Pune

1. Ceratizit India Pvt Ltd. Kolkatta Class P03CL012

1. Ceratizit India Pvt Ltd. Kolkatta

Class P03CL012181 72246124 CARBIDE TURNING INSERT DNMG 150616

GRADE GC425/TN4000 OR SIMILAR.1. Seco Tools (P) Ltd Pune 2. Taegutec India (P) Ltd. Banglore

1.Ceratizit India Pvt Ltd. Kolkatta Class P03CL012

1.Ceratizit India Pvt Ltd. Kolkatta Class P03CL012

180 1. Taegutec India (P) Ltd. Banglore 2. Kennmetal India Ltd Banglore 3.Seco Tools (P) Ltd Pune

CARBIDE TURNING INSERT ISO NO.DNMG 150608 GRADE PM-4025 / TN-1500 OR SIMILAR. Note: The Carbide Turning Insert ISO DNMG 150608 Grade PM-4025/TN-1500 should be able to produce min. 60 Nos. Bolt Con Rod Material HR Steel D933100 RD 86800 on Jyoti M/C with 1800 RPM at the feed of 0.2 mm/Rev..

72246112

72246145 CARBIDE TURNING INSERT TNMG 220416 GRADE GC435/TN4000 OR SIMILAR.

1. Kennmetal India Ltd Banglore 182

April-2011 of 63


183 72246236 CARBIDE TURING INSERT ISO NO.RCMX 120400 GRADE GC415/TN4000 OR SIMILAR.

1. Kennmetal Widia India Ltd BangloreClass P03CL012

184 72246248 CARBIDE TURNING INSERT ISO NO.RCMX 200600 GRADE TN4000/GC435 OR SIMILAR.

1.Kennmetal Widia India Ltd Banglore 2. Seco Tools (P) Ltd Pune 3.Ceratizit India Pvt Ltd. Kolkatta

Class P03CL012185 72246296 CARBIDE TURNING INSERT ISO NO SNMG

120408 GRADE GC435/TN4000 OR SIMILAR.1. Ceratizit India Pvt Ltd. Kolkatta

Class P03CL012186 72246324 CARBIDE TURNING INSERT ISO NO.SNMG

190616 GRADE TN4000/GC435 OR SIMILAR.1. Ceratizit India Pvt Ltd. Kolkatta 2.Kennmetal Widia India Ltd Banglore Class P03CL012

187 72246360 CARBIDE MILLING INSERT ISO NO.SPKN 1203 EDR GRADE TN35M/GC235 OR SIMILAR.

1. Taegutec India (P) Ltd. Banglore

Class P03CL012188 72246372 CARBIDE MILLING INSERT ISO NO.SPKN 1504

EDR GRADE TN35M/GC235 OR SIMILAR. Note: The Carbide Milling Insert ISO No. SPKN 1504 EDR Grade TN 35M/GC235 should be able to produce min. 50 Nos./Set one set=12 Nos. Insert Con Rod Material D31 PD 5101on BTM M/C with 180 RPM at the feed of 150 mm/Min

1. Taegutec India (P) Ltd. Banglore 2. Kennmetal India Ltd Banglore 3.Seco Tools (P) Ltd Pune 4.Ceratizit India Pvt Ltd. Kolkatta

Class P03CL012189 72246400 CARBIDE FINE BORING INSERT ISO NO.SPMR

090308 GRADE TK15/TN200/GC-415 OR SIMILAR. Note: The Carbide Fine Boring Insert ISO No. SPMR 090308 Grade TNK15/TN200/GC-415 should be able to produce min. 10 Nos. Con Rod Material D31 PD 5102 on Fine Boring M/C with 450 RPM at the feed of 4.23 mm/Min


Class P03CL012190 72246406 CARBIDE TURNING INSERT ISO NO.TNMG

220404 GRADE TN4000/GC425 OR SIMILAR.1. Taegutec India (P) Ltd. Banglore 2. Kennmetal India Ltd Banglore 3.Sandvik Asia Ltd. Pune Class P03CL012

191 72246412 CARBIDE FINE BORING INSERT ISO NO.SPMR 120308 GRADE GC425/TN4000 OR SIMILAR. Note: The Carbide Fine Boring Insert ISO No. SPMR 120308 Grade GC425/TN4000 should be able to produce min. 10 Nos. Con Rod Material D31 PD 5103 on Fine Boring M/C with 450 RPM at the feed of 4.23 mm/Min

1. Sandvik Asia Ltd. Pune 2. Seco Tools (P) Ltd Pune 3. Ceratizit India Pvt Ltd. Kolkatta

Class P03CL012

April-2011 of 63


192 72246460 CARBIDE TURNING INSERT ISO NO.TNMG 160408 GRADE GC435/TN4000 OR SIMILAR.

No Records AvailableClass P03CL012

193 72246472 CARBIDE TURNING INSERT ISO NO. TNMG 220412 GRADE GC435/TN4000 OR SIMILAR.

1. Ceratizit India Pvt Ltd. Kolkatta 2. Kennmetal Widia India Ltd Banglore

Class P03CL012

194 72246484 CARBIDE TURNING INSERT ISO NO.TNMG 220408 GRADE GC435/TN4000 OR SIMILAR.

1.Seco Tools (P) Ltd Pune Class P03CL012

195 72246524 CARBIDE MILLING INSERT ISO NO.TPKN 2204 PPN GRADE TN35M/GC-235 OR SIMILAR.

1.Seco Tools (P) Ltd Pune 2. Ceratizit India Pvt Ltd. Kolkatta

Class P03CL012196 72246600 CARBIDE BORING INSERT ISO NO.TPMR

110308 GRADE GC435/TN4000 OR SIMILAR.1. Ceratizit India Pvt Ltd. Kolkatta Class P03CL012

197 72246612 CARBIDE BORING INSERT ISO NO. TPMR 110304 GRADE GC-425/TN4000 OR SIMILAR.

1.Seco Tools (P) Ltd PuneClass P03CL012

198 72246672 CARBIDE MILLING INSERT ISO NO.TPAN 1603 AER GRADE TN35M/GC435 OR SIMILAR.


Class P03CL012199 72246698 CARBIDE TURNING INSERT ISO NO.VBMT

160408 GRADE GC425/TN2000 OR SIMILAR.1. Taegutec India (P) Ltd. Banglore 2. Seco Tools (P) Ltd Pune

Class P03CL012

200 72253514 TUBULAR RAM AS PER DRG.NO.ET-0177 ALT.`Y' REF.NO.10.

1. J.K Tools & Industries Patiala 2. Kem Tool Industries Patiala Class P03CL015

201 72253526 TUBULAR RAM AS PER DRG.NO.ET-0177 ALT.`X' REF.NO.5.

1. J.K Tools & Industries Patiala Class P03CL015

202 72253538 TUBULAR RAM AS PER DRG.NO.ET-0177 ALT.`X' REF.NO.3.

1. Kem Tool Industries Patiala 1. J.K Tools & Industries Patiala Class P03CL015

203 72257957 HSS H&G TS END MILL DIA 80mmx90mm CELx265mm OAL MT5 TANGED END AS PER SPECN.IS:6354-1971.


Class P03CL015204 72267452 CARBIDE TIP BRAZED TS M/C REAMER DIA

0.8748"/0.8745" WITHOUT COOLANT HOLE AS PER DRG.NO.TR-0005 ALT.'NIL'.


Class P03CL013205 72267598 HSS H&G TS PARALLEL M/C REAMER SIZE DIA

2.913"/2.915"x8.3/4"CELx16.1/8"OAL MT5 AS PER SPECN.BS 328:PT.4:1969.OR IS 5445-1978. Note: The HSS H&G TS Parallel Reamer size Dia 2.913"/2.915"x8.3/4"CELx16.1/8"OAL MT5 should be able to produce min. 100 Nos. Eq. Beam Material IS 2062 on Elha Drill M/C with 19 RPM at the feed of 0.31 mm/Rev.


Class P03CL013

April-2011 of 63


206 72270664 HSS H&G , TIN COATED,THREAD HAND TAP SIZE 1/2"-13UNC-3B AS PER SPECN.BS:949-PT.II-1979.


Class P03CL013207 72270706 HSS H&G , TIN COATED,THREAD HAND TAP

SIZE DIA 5/8"-11UNC-3B AS PER SPECN.BS:949-PT.II-1979.


Class P03CL013208 72400689 CARBIDE WHEEL TURNING INSERT ISO

NO.LNUX 301940-25M GRADE GC4025 OR SIMILAR.

1. Ceratizit India Pvt Ltd. Kolkatta 2. Seco Tools (P) Ltd Pune

Class P03CL016209 72400748 HSS H&G PS END MILL CUTTER SIZE DIA 3/16"

AS PER SPECN. IS 6353-19911. Dies & Tools Ltd Kolkatta

Class P03CL015210 72908350 SCISSOR FOR RAMMING M/C AS PER

DRG.NO.ET-0014 ALT.'X'.1. Sunrise Tooling Systems P Ltd Faridabad 2.Supershine Tools New Delhi 3. J.K Tools & Industries Patiala Class P03CL015

211 72980011 DIAMOND ELECTROPLATED CUTTING OFF WHEEL SIZE DIA 280mm x31.75mm BORE x 1.7 mm TO 2 mm THICK GRIT-80.

1. J.K Engineering (Diamond works Mumbai 2. Sri Tirupati Bala Ji Engg. Works Ludhiana 2. Anisenn Diamond Products Chennai

Class P03CL010212 72989034 HSS H&G TS CORE DRILL SIZE DIA

1.1/2"x7.7/8"FLx13.3/4"OAL AS PER SPECN.BS 328:PT.I:1959 OR IS 5366 -1978.


Class P03CL013213 72989036 HSS M-35 TICN COATED PRE-GRINDING GEAR

HOB FOR MANUFACTURING OF CRANK SHAFT GEAR(PT.NO.10140463) TO DRG.NO.M-0157 ALT.'Nil' MODULE 6.35. As per DIN 3968 Note: The Gear Hob Should be able to produce min 20 Nos. Crank Shaft Gear material AISI 86B45 on Simputensili/HMT Gear Hob M/C with 50 RPM at the rate of 1.2 mm/Rev.

1. S.S. Tools Patiala 2.ESGI Tools & Instruments Patiala 3. Ferromet Tools Patiala

Class P03CL014

April-2011 of 63


214 72989038 HSS M-35 TIN COATED PREGRINDING GEAR HOB MODULE 5.08 TO DRG.NO.M-0054 ALT.`Z'.AS PER DIN-3968 TO MANUFACTURE DRIVE GAER LOP PART NO. 10140426, GEAR EXTENSION SHAFT PART NO. 10140487, GEAR WATER PUMP PART NO. 10140505, IDLER GEAR FAN DRIVE PART NO. 10140943 AND FAN DRIVE GEAR PART NO. 10140955 Note: The TIN Coated Gear Hobl should be able to produce min.10Nos.Water Pump Gear Material AISI 86B45 on Simputensili/ HMT Gear Hob M/C with 50 RPM at the feed of 1.2mm/Rev..

1. ESGI Tools & Instruments Patiala 2. S.S. Tools Patiala 3. Dagger forst Tools Ltd Thane 4. Jainex Aamcol Ltd. Aurangabad

1.Ferromet Tools Patiala

Class P03CL014215 72989040 HSS H&G SIDE & FACE CUTTER SIZE DIA

2.1/2"xWIDTH 0.750"x BORE 27mm AS PER SPECN.BS:122-PT.I-1953.OR .IS : 6308 -1982.

1. Kem Tool Industry Patiala 2. Dies & Tools Ltd Kolkatta

Class P03CL015216 72989087 HSS HEXAGONAL PUNCH SIZE DIA 5/16" AS

PER SL.NO.2.OF DRG.NO.D-0056 ALT.'Z' 1. Sunrise Tooling Systems P Ltd Faridabad 2.Supershine Tools New Delhi Class P03CL015

217 72989099 THREAD ROLL FOR STUD CYL HEAD(10090605)1.1/8"- 12NFx50mm WIDTH AS PER SL. NO 8 OF DRG.NO.TT-0006 ALT.'U' . Note: The Thread Roll should be able to produce min. 4000 Nos. Stud Cylinder Head Material Alloy Steel D87018 on Thread Roll M/C.

1. Tool Grove Hyderabad


AS PER SPECN.BS:328-PT.I-1986.OR IS : 5103 : 1969


Class P03CL013219 72989154 HSS H&G THREAD STRAIGHT FOUR FLUTED

EX.LONG M/C TAP SIZE DIA M20x2.5mm PITCHx32mm FLx160mmOAL, AS PER SPECN.IS 6175:PT. 4:1991.CLASS 6H TYPE 'C'

1. Addison & Co. Ltd Ludhiana 2. Birla Precison & Technologies Ludhiana

Class P03CL013220 72989180 BROACH FOR Spider TO DRG.NO.TB-1/1 1. Dagger forst Tools Ltd Thane 1.Jainex Aamcol Ltd.

Aurangabad Class P03CL014221 72989233 BROACH FOR I-RING TO DRG.NO.TB-2/1 ALT

`Z'No Records Available

Class P03CL014222 72989245 BROACH FOR I-RING TO DRG NO TB-2/2 ALT

`Z'.1. Dagger forst Tools Ltd Thane

Class P03CL014

April-2011 of 63


223 72989257 BROACH FOR I-RING TO DRG NO TB-2/3 ALT `Z'.


224 72989269 BROACH FOR I-RING TO DRG NO TB-2/4 ALT `Z'.


225 72989270 KIT CONSISTING OF GROOVING INSERT SAL NO.R154.93-3150 GR.S1P SUITABLE FOR SAL HOLDER NO.R154.91-2525-3 OR SIMILAR. (01 KIT = 15 INSERTS & 01 HOLDER)

Class P03CL012226 72989282 KIT CONSISTING OF GROOVING INSERT SAL

NO.R154.91-3160 GR.S4 SUITABLE FOR SAL HOLDER R154.91-2525-3 OR SIMILAR. (01 KIT = 10 INSERTS & 01 TOOL HOLDER)

1. Taegutec India (P) Ltd. Banglore 2. Seco Tools (P) Ltd Pune

Class P03CL012227 72989300 KIT CONSISTING OF GROOVING INSERT SAL

NO.L154.91-5415 GR.S4 SUITABLE FOR HOLDER NO.L154.91-2525-5 OR SIMILAR (01 KIT = 10 INSERTS & 01 HOLDER)


Class P03CL012228 72989324 KIT CONSISTING OF GROVING INSERT ISCAR

NO GIF-800E-1.20 GR.IC908 SUITABLE FOR HOLDER GHDL-32-836 ORSANDVIK INSERT NO. N123 L2-0800-0012 TM 4025 & TOOL HOLDER LF 123 L32 - 3232 BM (1 KIT = 50 INSERTS & 1 HOLDER). Note: The Grooving Insert should be able to produce min.15 Nos. Stiffer Cam Shaft/FE Cam Shaft Material AISI 1080 M.C. Steel D81602A on CIN/SBC60/SBC35 M/C with 250 with CSS RPM at the feed of 0.12mm/Rev..

1. Taegutec India (P) Ltd. Banglore 2.Kennmetal Widia India Ltd Banglore

Class P03CL012229 72989336 KIT CONSISTING OF U-DRILL INSERT SAL

NO.WCMX 080412 GR.GC235 SUITABLE SAL U-DRILL NO.R416.1-0470-20-04 OR SIMILAR. (01 KIT = 10 INSERTS & 01 HOLDER)

1. Kennmetal Widia India Ltd Banglore

Class P03CL012230 72989348 KIT CONSISTING OF U-DRILL INSERT SAL

NO.WCMX 060308 GR.GC235 SUITABLE FOR SAL U-DRILL NO.R416.1.0360-20-04 OR WIL INSERT NO.WCMT 06T308 GRADE TN4000 SUITABLE FOR WIL BWS DRILL NO.69339932 (01 KIT = 10 INSERTS & 01 U-DRILL)

1.Kennmetal Widia India Ltd Banglore

Class P03CL012

April-2011 of 63


231 72989350 KIT CONSISTING OF U-DRILL INSERT SAL NO.WCMX 080412 GR.GC235 SUITABLE FOR SAL U-DRILL NO.R416.1-0440-20-04 OR WIDIA INSERT WIL NO.WCMT 080408 GR.TN4000 SUITABLE FOR WIL BWS DRILL NO.69339940 OR SIMILAR. (01 KIT = 10 INSERTS & 01 HOLDER)

1.Kennmetal Widia India Ltd Banglore

Class P03CL012232 72989361 KIT CONSISTING OF PARTING INSERT WIL

NO.44315524 GR.TN4000 SUITABLE FOR WIL HOLDER NO.70703011(RH) OR SAL INSERT NO.N123H2-0400-0002-CR GD.GC235 SUITABLE FOR SAL HOLDER NO.RF123H25-2525 B OR SIMILAR. (1 KIT = 150 INSERTS & 01 HOLDER)


Class P03CL012233 72989373 KIT CONSISTING OF PARTING INSERT WIL

NO.44315524 GR.TN4000 SUITABLE FOR WIL HOLDER NO.70703012(LH) OR SAL INSERT NO.N123H2-0400-0002-CM GR.GC-2135 SUITABLE FOR SAL HOLDER NO.LF123H25-2525-BM OR SIMILAR (01 KIT = 150 INSERTS & 01 TOOL HOLDER)


Class P03CL012234 72989385 KIT CONSISTING OF THREADING INSERT WIL

NO.44315033 GR.TNP20 SUITABLE FOR WIL HOLDER NO.W327903R OR SIMILAR. (ONE KIT = 10 INSERTS & 01 HOLDER)


Class P03CL012235 72989397 KIT CONSISTING OF INTERNAL THREADING

INSERT WIL NO.44315912 GR.TNP20 AND WIL HOLDER NO.6949789410 OR SIMILAR. (01 KIT = 10 INSERTS & 01 HOLDER). Note: The Insert should be able to produce min. 24 Nos. Wing Nut Inter/Centre Material Forging on 1SC ATL M/C with 350 RPM at the feed of 2.1166 mm/Rev.


Class P03CL012236 72989403 THREAD ROLL FOR STUD BOLT

(10211081/10211986) SIZE 1.1/2"-12 UNFx60mm WIDTH AS PER DRG.NO.TT-0006 ALT.'V' SL.NO.10.

1. Tool Grove Hyderabad

Class P03CL018

April-2011 of 63


237 72989415 THREAD ROLL FOR STUD BOLT (10211093) SIZE 1.3/4"-12UN x 80mm WIDTH AS PER SL.NO.11 OF DRG.NO.TT-0006 ALT.'S' . Note: The Thread Roll should be able to produce min. 1200 Nos. MB Stud Inter Material Alloy Steel D87018 on Thread Roll M/C.

1. Tool Grove Hyderabad 2. Praga Tools Ltd. Secunderabad

1. Passi Enterprise Kapurthala

Class P03CL018238 72989427 HSS H&G PS TWIST DRILL SIZE DIA 1/8"x5"

FLx8" OAL AS PER SPECN.IS 7823-1983.1. Addison & Co. Ltd Ludhiana 2. Zenith Birla (India ) Ltd Ludhiana.

Class P03CL0131. Jiwan Deep Tool Indust. Patiala

Class P03CL013240 72989464 MILLING INSERT SPKN-1203 EDL SIMILAR TO

SANDVIK GD. GC-235/ WIDIA GD. TN-35M / SECO GD. 250M


Class P03CL012241 72989476 HSS,6/5/2, H&G, SLITTING SAW SIZE 5" X 3/64"

X 27 MM BORE AS PER IS ,5031-1992 OR BS 122:PART-I :1953

1. Super Tool Corp Patiala

Class P03CL015242 72989488 RADIUSING TOOL TO DRG. NO. M-0106/R ALT.

'Y'. Note: The Radiusing Tool to Drg. No. M-0106/R Alt-Y should be able to produce min. 12 Nos. Piston Pin Material Seamless Steel Tube on R Drill M/C with 71 RPM at the feed of Manual.

1.Super Tool Corp Patiala 2. Supershine Tools New Delhi 3. Kem Tool Industry Patiala

Class P03CL015243 72989490 HSS,6/5/2,H&G, SIDE & FACE CUTTER SIZE

DIA 100 MM X WIDTH 21.90 MM/ 21.95 MM XBORE 27 MM AS PER IS 6308-1982

1. Kem Tool Industry Patiala 2.Addison & Co. Ltd Ludhiana


Class P03CL015244 72989506 HSS,H&G,TIN COATED EXTRA LONG M/C TAP

1/2" -20UNF-3B X 6" OAL AS PER BS 949 : PART-II ;1992


Class P03CL013

1.Addison & Co. Ltd Ludhiana No Records AvailableHSS H&G CENTRE DRILL SIZE 5/16"x7/16"x60^x2.1/2"OAL and Pilot length 15/32″ to 13/32″ AS PER SPECN.BS:328-PT.II-1950 OR IS 6708-1977.

72989440239

April-2011 of 63


245 72989518 KIT OF MILLING CUTTER WITH INDEXABLE INSERTS COMPRISING OF (A) CUTTER 01 NO. (B) INSERT 40SETS , HAVING TWO CUTTING EDGES OR 20 SETS WITH 04 CUTTING EDGES.(ONE SET EQUIVALENT TO NO OF INSERTS TO BE FIXED IN THE CUTTER AT A TIME). (C) INSERT FIXING SCREWS AND OTHER SPARES 08 SETS CONFORMING TO SPECIFICATION NO. DCW/M/TPS/63 REV. 0 DATED 23/04/04


Class P03CL012246 72989543 TIN COATED GUN DRILL SIZE 23.11 MM TO

DRG. NO. TD-0019. Note: The TIN Coated Gun Drill size 23.11 mm to Drg. No. TD-0019 Y should be able to produce min. 03 Set Con Rod Material D31PD5103 on WIDMA M/C with 850 RPM at the feed of 25mm/Rev..


Class P03CL016247 72989555 GUN DRILL SIZE 12.73 MM TO DRG. NO. TD-

00201. Kennmetal India Ltd Banglore 1. Taegutec India (P) Ltd.

Banglore Class P03CL012248 72989567 TIN COATED GUN DRILL SIZE 9.522 MM TO

DRG. NO. TD-00261. Kennmetal India Ltd Banglore 2. Taegutec India (P) Ltd. Banglore Class P03CL016

249 72989579 TIN COATED GUN DRILL SIZE 11.53 MM TO DRG. NO. TD-0021

1. Kennmetal India Ltd Banglore Class P03CL016

250 72989580 TIN COATED GUN DRILL SIZE 10.74 MM TO DRG. NO. TD-0023


251 72989592 INVERTED SPOT FACE CUTTER AS PER SL. NO. 20 OF DRG. NO. M-0033 ALT 'V'.


1. Dies & Tools Ltd Kolkatta

Class P03CL015252 72989609 HSS,M-35,TIN COATED GEAR HOB MODULE

6.35, 20^ PRESSURE ANGLE ,SINGLE START ,R.H. ,NON TOPPING ACCURACY CLASS 'AA" FINISHING FOR CAM SHAFT GEAR 10140440,Z=104,SIZE DIA 150 MM X 130 X50 MM BORE DIN 3968, DRG. NO. M-0089 ALT. ‘Z' Note: The TIN Coated Gear Hob should be able to produce min.10Nos. Cam Shaft Gear Material AISI 86B45 on Simputensili/ HMT Gear Hob M/C with 60 RPM Ist Cut and 70 IInd Cut at the feed of 1.2mm/Rev & 1.5 mm/Rev..

1. S.S Tools Patiala 1. ESGI Tools & Instruments Patiala

Class P03CL014

April-2011 of 63


253 72989646 Cam Milling Inserts and Inserts fixing Screws (For Stiffer) as follow: (a)Sets of Milling Inserts compatible with cam milling cutter to Kennametal Widia Drg. No.W489838/Sandvik ordering No. R-390-200-Q60-43L/Taegutec ordering No.TES-D200 44 60 AP-17. (b) Insert fixing screws with the above mentioned Inserts Conforming to specification No. DMW/M/TPS/63(STIFFER) REV.-2 Dated 28/06/06.

1 . Sandvik Asia Ltd. Pune

Class P03CL012254 72989658 BI-METAL BANDSAW BLADE M-42SIZE 3660 X

32/34 X 1.1 X5/8 TPI1. Bippico Industries Tools (P) Ltd NAVS 2.Niran Tools & Machinery Mumbai Class P03CL011

255 72989660 BI-METAL BANDSAW BLADE M-42SIZE 4100 X 32/34 X 1.1 X2/4 TPI

1. Bippico Industries Tools (P) Ltd NAVS 2. D.B SHAH & Brothers Kolkata 3. Lenox India P Ltd.Ludhiana Class P03CL011

256 72989671 BI-METAL BANDSAW BLADE M-42SIZE 4100 X 32/34 X 1.1 X5/8 TPI

1. Bippico Industries Tools (P) Ltd NAVS 2. D.B SHAH & Brothers Kolkata 3. Lenox India P Ltd.Ludhiana Class P03CL011

257 72989683 CARBIDE BORING INSERT TPMR-160304 TN-2000

1. Ceratizit India Pvt Ltd. Kolkatta 2.Kennmetal Widia India Ltd Banglore Class P03CL012

258 72989695 HSS,H&G, TIN COATED THREAD EX. LONG TAPS SIZE 5/8"-11 UNC-3B X 8" OAL

1 Zenith Birla India Ltd. LudhianaClass P03CL013

259 72989701 Kit of Coromant U Drill , dia 37 mm with Insert and Insert screws ; consisting of following :- a) Helical fluted through coolant Coromant U drill dia 37 mm with Cylindrical shank dia 40 mm as per ISO 9766 for hole depth L / D = 3 to Sandvik Ordering code : - R 416.2 – 0370 L 40 – 31 - Qty 1 no ./kit b) Peripheral Insert for above to Sandvik Ordering code : - WCMX 06T308 R – 53 3040 – Qty 50 nos / kit. c) Central Insert for above to Sandvik Ordering code : - WCMX 06T308 R – 53 1020 – Qty 50 nos / kit d) Insert screws for above Coromant U drill to Sandvik Ordering code : - 416 . 1 – 833 - Qty 20 nos ./kit

1.Kennmetal India Ltd Banglore

Class P03CL012

April-2011 of 63


260 72989713 Kit of CoroMill 390 Long edge milling cutter , dia 32 mm with Insert & Insert screws , having through coolant pre-hardened steel body ; consisting of following :- a) CoroMill 390 Long edge milling cutter dia 32 with cylindrical shank 25 mm and 2 nos x 36 mm long Helical flutes for total 8 nos inserts ; and Reach length = 48 , OAL = 109 mm to Sandvik Ordering code : -R 390 – 032 A 25 – 36 L - Qty 1 no. /kit b) CoroMill 390 inserts suitable for above with nose radius 1.0 mm & Heavy milling high edge security Geometry to Sandvik Ordering code : R390 – 11T310 M - PH 4040 – Qty 60 nos /kit c) Insert screws for above to Sandvik Ordering code : -5513 024 – 01 - Qty 10 nos . /kit Note- Above coro mill 390 Long edge milling cutter dia 32 mm should be compatible with adaptor to Sandvik ordering code 392.140 20 50 25 100

1. Taegutec India (P) Ltd. Banglore 2. Kennmetal India Ltd Banglore 3.Ceratizit India Pvt Ltd. Kolkatta

Class P03CL012261 72989725 Single edge Finish Boring kit for Boring range 34.5

– 53.5 mm; consisting of following : - a) Cartridge with 90 deg. approach angle to suit screw mounted TPMT 090204 insert ; to Sandvik Ordering code : -391 . 38U – 1A – TP09 A - Qty 2 nos. /kit b) Coated insert with finishing geometry suitable for above cartridge to Sandvik Ordering code : - TPMT 090204 – PF 4025 – Qty 60 nos ./kit c) Insert screw for above to Sandvik Ordering code : - 5513 020 – 05 – Qty 10 nos. /kit Note : Above cartridge should be compatible withSingle edge fine boring Varilock 50 Adaptor to Sandvik Ordering code : 391.38A – 1 – 033 50 147A

1. Sandvik Asia Ltd Pune

Class P03CL012

April-2011 of 63


262 72989737 Twin edge Boring kit for Boring range 100 – 125 mm; consisting of following : - a) Slide with 90 deg. approach angle to suit screw mounted TCMT 2204 insert ; to Sandvik Ordering code : - R416.3 – 129 125 40 - Qty 12 nos /kit b) Coated insert with nose radius = 0.8 mm and roughing geometry suitable for above slide to Sandvik Ordering code :TCMT 220408 – PR 4035 – Qty 160 nos /kit c) Coated insert with nose radius = 1.2 mm and roughing geometry suitable for above slide to Sandvik Ordering code : - TCMT 220412 – PR 4035 – Qty 160 nos. /kit d) Insert screw for above inserts to Sandvik Ordering code : - 5513 020 – 18 – Qty 20 nos. /kit Note : Above slide should be compatible with Twin edge boring - Varilock 80 shank adaptor to Sandvik Ordering code : 391.68 – 090 80 130


Class P03CL012

April-2011 of 63


263 72989749 Single edge Finish Boring kit for Boring range 99.5 – 167.5 mm; consisting of following : - a) Extension slide to Sandvik Ordering code :-391.68A – 0 – 096 022A - Qty 04 no /kit . b) Fine boring head having adjustment facility of 0.01 mm in dia through graduated dial ; toSandvik Ordering code :- 391.38A – 2 – 046 28 043A - Qty 04 no ./kit c) Cartridge with 92 deg. approach angle to suit screw mounted TPMT to Sandvik Ordering code : - 391 . 38U – 2 – TP11 A - Qty 04 nos ./kit d) Coated insert with finishing geometry suitable for above cartridge to Sandvik Ordering code : - TPMT 110304 – PF 4025 – Qty 120 nos ./kit (e) Insert screw for above to Sandvik Ordering code : - 5513 020 – 03 – Qty 20 nos / kit Note : Above items should be compatible with Single edge fine boring Varilock 80 Adaptor to Sandvik Ordering code : 391.38A – 0 – 096 80 043A

1 . Taegutec India (P) Ltd. Banglore 2. Sandvik Asia Ltd. Pune

Class P03CL012

April-2011 of 63


264 72989750 Single edge Finish Boring kit for Boring range 250 – 372 mm; consisting of following : a) Fine boring head having adjustment facility of 0.01mm in dia through graduated dial ; toSandvik Ordering code :-391.38A – 2 – 046 28 043A - Qty08 nos ./kit b) Cartridge with 92 deg. approach angle to suit screw mounted TPMT 1103 insert ; to Sandvik Ordering code : - 391 . 38U – 2 – TP11 A - Qty 08 nos ./kit c) Coated insert with finishing geometry suitable for above cartridge to Sandvik Ordering code : - TPMT 110304 – PF 4025 – Qty 240 nos . /kit (d) Insert screw for above to Sandvik Ordering code : - 5513 020 – 03 – Qty 20 nos ./kit Note : Above items should be compatible with Single edge fine boring Varilock 80 combination of Bar and Extension slide to Sandvik Ordering codes :Bar : R391. B01R – 40 D 053 A andExtension slide R391.B01 F - 020

1 Sandvik Asia Ltd Pune

Class P03CL012265 72989762 Chamfering /Radiusing Kit consisting of the

following :- a) Coated Insert to Walter ordering code :XDGT2506 160R-D57 ,Grade WAP35. Qty 10 nos/kit b) Coated insert with light Waveline milling geometry to Walter ordering code :-SPMT 09T308 F55 - Qty 60 /Kit (c) Insert screw for above to Walter Ordering code FS 1165 - Qty 10 nos ./Kit (d) nsert screw for above to Walter Ordering code FS 359 - Qty 10 Nos. ./Kit Note : Above items should be compatible to Walter cutter Ordering code : F2239-300062

1. OJUS Tech. Solutions Pvt Ltd Chandigarh

Class P03CL012266 72989774 Coromant Brazed carbide self - centering Delta

drill with locally hardened reinforced chip flutes , Internal coolant and Cylindrical shank dia 16 mm with flat to ISO 9766 to Sandvik Ordering code : -R411.5 – 13034 D12.70 Grade P20 Or Equivalent

1. Taegutec India (P) Ltd. Banglore 2. Seco Tools (P) Ltd Pune

Class P03CL012

April-2011 of 63


267 72989786 Kit for Face-milling with Entering angle 45 degrees consisting of insert , insert screws , as detailed below : - a) Self locating screw mounted Coated insert with optimized chip breaker geometry , to Sandvik:Ordering code : -R245–12T3 M–PM 4030 - Qty 150 nos ./kit (b) Insert screws for above to Sandvik OrderingCode : -5513 020 – 01 - Qty 30 nos ./kit Note : Above items should be compatible with High productive facemill to Sandvik Ordering code :- R 245 - 125 Q 40 – 12M

1. Taegutec India (P) Ltd. Banglore 2. Kennmetal India Ltd Banglore

Class P03CL012268 72989798 Chamfering Kit for 60 degrees , consisting of

following :- a) Coated insert with heavy Waveline milling geometry to Sandvik Ordering code :-SPMT 120408 – WH 4030 - Qty 60 nos /kit (b) Insert screw for above to Sandvik Ordering 5513 020 – 29 - Qty 10 nos/kit. Note : Above items should be compatible withChamfering cutter having Varilock 50 coupling size for 60 deg Chamfer to Sandvik Ordering code R215.64 – 36V50 – 6012


Class P03CL012269 72989804 Chamfering Kit for 45 degrees , consisting of

following :- a) Coated insert with Light Waveline milling geometry to Sandvik Ordering code :- SPMT 120408 – WL 4030 - Qty 60 nos./kit b) Insert screw for above to Sandvik Ordering code 5513 020 – 29 - Qty 10 nos ./kit Note : Above items should be compatible withChamfering cutter having Varilock 50 coupling size for 45 deg Chamfer , to Sandvik Ordering code : R215.64 – 32V50 – 4512

1 Sandvik Asia Ltd Pune 2. Taegutec India (P) Ltd. Banglore

Class P03CL012

April-2011 of 63


270 72989816 Disc milling kit for adjustable CoroMill S & F cutter with spring loaded serrated cassettes , range 10 – 12 mm ; consisting of following ;- a) Self locating screw mounted Coated inserts to Sandvik ordering code :N331.1A–084508M-PM 4040 – Qty 200 nos./kit (b) Insert screws for above to Sandvik Ordering code : 5513 020 – 24 - Qty 30 nos./kit Note : Above items should be compatible with CoroMill side and facemilling cutter, to Sandvik Ordering code : R 331.32 – 100Q27 – EM * 10.00*


Class P03CL012271 72989828 Kit for Face-milling with Entering angle 45 degrees

, consisting of insert , insert screws , as detailed below : - a) Self locating screw mounted Coated insert with optimized chip breaker geometry , to Sandvik:Ordering code R245-12T3 M-PL 4030 Qty. 150 nos. /kit b) Insert screws for above to Sandvik Ordering Code : - 5513 020 – 01 - Qty 30 nos ./kit Note : Above items should be compatible with High productive facemill to Sandvik Ordering code :- R 245 - 200 Q 60 – 12M

1. Taegutec India (P) Ltd. Banglore 2. Sandvik Asia Ltd Pune

Class P03CL012272 72989830 Kit for Tap adaptors & Holders with friction clutch

consisting of following :- a) Tap adaptor with Varilock Coupling size 50 suitable for tapping range M8 – M20 , to Sandvik Ordering code ;-391.60 – 02 50 140A - Qty 4 no /kit. b) Tap holder with friction clutch for shank dia 12 x 9 to Sandvik Ordering code :-393.03 – SES2 – D120 x 090 - Qty 05 nos ./kit c) Tap holder with friction clutch for shank dia9 x 7 to Sandvik Ordering code :-393.03 – SES2 – D090 x 070 - Qty 05 nos/kit. Note : Above items should be compatible withVarilock coupling size 50 .

1 Sandvik Asia Ltd Pune 1. Kennmetal India Ltd Banglore

Class P03CL012

April-2011 of 63


273 72989841 Duo Bore Boring kit for Boring range 99 – 125 mm; consisting of following : - a) Slide similer ; to Sandvik Ordering code : -391.68 D – 7 – 125 40S12A - Qty 06 nos/kit . b) Coated insert similer to Sandvik Ordering code : -SNMG 120412 – PR 4035 – Qty 160 nos /kit. Note : Above slide should be compatible withDuobore boring – Coromant Capto C8 adaptor to Sandvik Ordering code : C8 – 391.68A – 7 – 080 060 C


Class P03CL012274 72989853 Kit of Coromant U Drill , dia 33 mm with Insert and

Insert screws ; consisting of following :- a) Helical fluted through coolant Coromant U drill dia 33 mm to Sandvik Ordering code : (a) R 416.2 0330 L40-31 Qty 1 no /Kit b) Peripheral Insert for above to Sandvik Ordering code : -WCMX 06T308 R – 53 3040 – Qty 50 nos./kit c) Central Insert for above to Sandvik Ordering code : - WCMX 06T308 R – 53 1020 – Qty 50 nos/kit d) Insert screws for above Coromant U drill to Sandvik Ordering code : -416 . 1 – 833 - Qty 20 nos /kit.


Class P03CL012

April-2011 of 63


275 72989865 Single edge Finish Boring kit for Boring range 163.5 – 269.5 mm; consisting of following : - a) Fine boring head having adjustment facility of 0.01mm in dia through graduated dial ; to Sandvik Ordering code :-391.38A – 2 – 046 28 043A - Qty 08 nos./kit b) Cartridge with 92 deg. approach angle to suit screw mounted TPMT 1103 insert ; to Sandvik Ordering code : - 391. 38U - 2 – TP11 A - Qty 12 nos /kit c) Coated insert with finishing geometry suitable for above cartridge to Sandvik Ordering code : - TPMT 110304 – PF 4025 – Qty 360nos /kit d) Insert screw for above to Sandvik Ordering code : - 5513 020 – 03 – Qty 20 nos /kit Note : Above items should be compatible with Single edge fine boring Varilock 80 adaptor to Sandvik Ordering codes : 391.38A – 0 – 096 80 043A


Class P03CL012276 72989877 Kit for Multi-purpose Round insert cutter ,

consisting of insert , insert screws , as detailed below : - a) Self locating screw mounted Coated insert with optimized chip breaker geometry for Heavy milling to Sandvik Ordering code : - RCKT – 2006MO – PH 4030 - Qty 250 nos ./kit b) Insert screws for above to Sandvik Ordering Code : - 5513 020 – 14 - Qty 30 nos./kit Note : Above items should be compatible withHigh productive Multi – purpose Round Insert CoroMill to Sandvik Ordering code :- R 200 - 140 Q 40 – 20 M ; R 200 – 180 Q 60 – 20 M


Class P03CL012

April-2011 of 63


277 72989889 Heavy duty Boring kit for Boring range 250 – 350 mm; consisting of following : - a) Cartridge with 90 deg. approach angle to suit lever mounted TNMG 220408 insert ; to Sandvik Ordering code : -PTGNL 20CA – 22 - Qty 06 nos ./kit b) Coated insert with nose radius = 0.8 mm and medium geometry suitable for above slide to Sandvik Ordering code : - TNMG 220408 – PM 4025 – Qty 80 nos./kit c) Cartridge with 75 deg. approach angle to suit lever mounted SNMG 150608 insert ; to Sandvik Ordering code : -PSRNL 20CA – 15 - Qty 06 nos ./kit d) Coated insert with nose radius = 0.8 mm and roughing geometry suitable for above slide to Sandvik Ordering code : - SNMG 150608– QM 4025 – Qty 200 nos ./kit Note : Above slide should be compatible withHeavy duty boring tool to Sandvik Ordering code : R 391.B01 R - 40 D 053 A and R 391.B02 R – 2012 A

1 Taegutec India (P) Ltd. Banglore 2. Ceratizit India Pvt Ltd. Kolkatta

Class P03CL012278 72989890 Square shoulder milling kit consisting of Inserts ,

Insert screws as detailed :- a) Precision ground helical edge coated Insert with nose radius = 1.2 mm to Sandvik Ordering code :-R390–170412 E–PM 1025 - Qty 150 nos./kit b) Insert screw for above to Sandvik ordering code : 5513 020 – 37 - Qty 20 nos . /kit Note : Above items should be compatible with Helical fluted pre-hardened steel body CoroMill 390 with Internal coolant to Sandvk ordering code R 390 - 032 B 32 –17 M


Class P03CL012

April-2011 of 63


279 72989907 Kit for Square Shoulder Face-milling with Entering angle 90 degrees consisting of insert , insert screws , as detailed below : - a) Self locating screw mounted Coated insert with optimized chip breaker geometry for Heavy milling to Sandvik Ordering code : - R290.90–12T320 M–PH 4030 - Qty 150 nos . /kit b) Insert screws for above to Sandvik Ordering Code : - 5513 020 – 32 - Qty 30 nos /kit. Note : Above items should be compatible with High productive Square Shoulder facemill to Sandvik Ordering code :- R 290 - 200 Q 60 – 12M


Class P03CL012280 72989919 Set of U Dril & Inserts one set consists of (I) U drill

dia30similer to Sandvik Ordering Code R416.2-.0300-L32-21=03Nos. (II) Inserts WCMX 050308R53 1020=50Nos. (III) Inserts WCMX 050308 P53 3040=50Nos.


Class P03CL012281 72989920 Carbide Inserts DCMT 11T308 Similar to Sandvik

Grade PF4015. 1. Kennmetal Widia India Ltd Banglore 2. Seco Tools (P) Ltd Pune

Class P03CL012

282 72989932 Set of Parting Blade & Inserts one set consists of (I)Parting Blade similar to Sandvik ordering No.N 151-2-21-40=25Nos.(II)Inserts similar to Sandvik No. 151-2-400SE 4125=250Nos.


Class P03CL012283 72989944 Carbide Inserts TCMT 110204 Similar to Sandvik

Grade UF4015. 1. Kennmetal Widia India Ltd Banglore

Class P03CL012284 72989968 Carbide Inserts DCMT 070208 Similar to Sandvik

Grade PF4015. 1.Taegutec India (P) Ltd. Banglore 2 Seco Tools (P) Ltd Pune

1. Ceratizit India Pvt Ltd. Kolkatta Class P03CL012

285 72989970 Set of Tool Holder & Inserts one set consists of (I) Tool Holder similer to Kennametal Widia Ordering No KSEM 200 R1WN 25M=01No.(II) Tool Holder KSEM 215 R5WN 25M=02Nos. (III) Inserts KSEM 2150G DMCS 5=30Nos.


Class P03CL012286 72989981 Set of U-Drill & inserts one set consists (I) U-Drill

similar to Sandvik ordering No. R416.2.0127-L20-21=10Nos. (II) Inserts LCMX 020204 P53-3040=50Nos.(III) Inserts LCMX 020204 C53 1020=50Nos.


Class P03CL012

April-2011 of 63


287 72989993 Carbide Inserts TCMT 110208 similar to Sandvik grade UM 1025. Note: The Insert should be able to produce min. 50 Nos. Yoke Material D81440 on CNC ATL M/C with 2200 RPM at the feed of 0.06 mm/Rev.


Class P03CL012288 72990004 Carbide Inserts DCMT 070204 similar to Sandvik

Grade PF4025.1. Taegutec India (P) Ltd. Banglore

Class P03CL012289 72990016 Set of U-Drill & Inserts one set consists (I) U-Drill

Dia 20 Similar to Sandvik ordering No. R416.2.0200L-25-31=05Nos. (II) Inserts LCMX 030308 -R53-3040=60Nos(iii)LCMX 030308-C53-1020=60 Nos.

1. Seco Tools (P) Ltd Pune 2.Taegutec India (P) Ltd. Banglore 3. Ceratizit India Pvt Ltd. Kolkatta

Class P03CL012290 72990028 Tangential Chaser for taper Thread 1"-4"-11TPI

BSP to Drg. No. CS-6.1. Sunrise Tooling Systems (P) Ltd. Faridabad 2. Aman Enterprise Patiala Class P03CL015

291 72990030 Tangential Chaser for taper Thread 1/2" to 7/8" BSP (14TPI) to Drg. No. CS-2.

1. Sunrise Tooling Systems (P) Ltd. Faridabad 2. Aman Enterprise Patiala Class P03CL015

292 72990041 HSS,H&G Taper Shank Extra Long Twist Driil Dia 1.5/8"XFL14"XOAL 21.1/2" as per IS:7822-1983.

1. Zenith Birla India Ltd. Ludhiana 2. Addison & Co. Ltd Ludhiana

Class P03CL0131. Kennmetal India Ltd Banglore

Class P03CL012294 72990065 Cam Milling Insert and Insert fixing Screw as per

specification No. DMW/M/TPS/63 Rev.3 dated 06/10/2006.

1. Taegutec India (P) Ltd. Banglore 2. Kennmetal India Ltd Banglore 3. Sandvik Asia Ltd Pune Class P03CL012

295 72990089 Single edge Fine Boring kit for Boring consisting of following : - a) Fine boring head to Sandvik Ordering code :-391.38 – 2 – 046 28 043A - Qty 01 nos./kit b) Cartridge to Sandvik Ordering code : - 391. 38U - 2 – TP11 A - Qty 02 nos /kit c) Coated insert to Sandvik Ordering code : - TPMT 110304 – PF 4025 – Qty 200 nos /kit d) Insert screw for above to Sandvik Ordering code : - 5513 020 – 03 – Qty 20 nos /kit


Class P03CL012

293 1 Sandvik Asia Ltd Pune 2. Taegutec India (P) Ltd. Banglore

Cam Milling Insert and Insert fixing Screw (for stiffer ) as per specification No. DMW/M/TPS/63 (Stiffer) Rev.3 dated 05/10/2006.

72990053

April-2011 of 63


296 72990090 Indexable Drilling Kit Dia1" X 10"Consisting of the following:- (a)ISO 50 side lock holder to sandvik ordering code No. A 1B 27-50 25 085 or eq. Qty. 01/Kit (b) Drill body to sandvikordering code No. R 805.D25-4L 32-10 or eq. qty. 01/Kit. (c) Central Insert to Sandvik ordering code No. 800-05 03 08M-C-G 1025 or eq. qty. 50/Kit (d) Intermediate Insert to Sandvik ordering code No. 800-05 03 08M-I-G 1025 or eq. qty. 50/Kit. (e) Peripheral Insert to Sandvik ordering code No. 800-06 03 08H-P-G 1025 or eq. qty. 50/Kit (f) Pads to Sandvik ordering code No. 800-06 AP1 or eq. qty. 50/Kit. (g) Adjustable Drill Holder to Sandvik ordering code No. 392.140277-50 02 055 A or eq. qty. 01/Kit. (h) Slide to Sandvik ordering code No. 393.277-25 02 085 A or eq. qty. 01/Kit

No records available Class P03CL012

297 72990107 Pre Drilling Kit Dia 1" X 10" consisting of the following:- (a) Drill body to sandvikordering code No. 880-D 2500 L25-02 or eq. qty. 01/Kit. (b) Central Insert to Sandvik ordering code No. 880-05 03 05H-C-GM 1044 or eq. qty. 50/Kit (c) Peripaeral Insert to Sandvik ordering code No. 880-05 03 W05H-P-GM 4044 or eq. qty. 50/Kit.


Class P03CL012

April-2011 of 63


298 72990119 Indaxable Drilling Kit Dia 1.1/32" X 5" consisting of the following:- (a) Adjustable Drill Holder to Sandvik ordering code No. 392.140277-500 3075 A or eq. qty. 01/Kit. (b) Slide to Sandvik ordering code No. 393.277-40 03 090 A or eq. qty. 01/Kit (c) Sleeve to Sandvik ordering code No. 393.277-40 32 074A or eq. qty. 01/Kit. (d) Drill body to sandvikordering code No. 880-D 2600 L32-05 or eq. qty. 01/Kit. (e) Central Insert to Sandvik ordering code No. 880-05 03 05H-C-GM 1044 or eq. qty. 50/Kit (f) Peripaeral Insert to Sandvik ordering code No. 880-05 03 W05H-P-GM 4044 or eq. qty. 50/Kit.


Class P03CL012299 72990120 Indaxable Drilling Kit Dia 1.5/16" X4" consisting of

the following:- a) Adjustable Drill Holder to Sandvik ordering code No. 392.140277-500 3075 A or eq. qty. 01/Kit. (b) Slide to Sandvik ordering code No. 393.277-40 03 090 A or eq. qty. 01/Kit (c) Drill body to sandvikordering code No. 880-D 3300 L40-03 or eq. qty. 01/Kit. (d) Central Insert to Sandvik ordering code No. 880-06 04 06H-C-GM 1044 or eq. qty. 50/Kit (e) Peripaeral Insert to Sandvik ordering code No. 880-06 04 W06H-P-GM 4044 or eq. qty. 50/Kit.

1. Taegutec India (P) Ltd. Banglore 2. Sandvik Asia Ltd Pune


April-2011 of 63


300 72990132 Indaxable Drilling Kit Dia 1.5/8" X 8" Consisting of the following:- (a)ISO 50 side lock holder to sandvik ordering code No. A 1B 27-50 40 66 or eq. Qty. 01/Kit (b) Drill body to sandvikordering code No. R 805.D38-1L 40-05 or eq. qty. 01/Kit. (c) Central Insert to Sandvik ordering code No. 800-08 T3 08M-C-G 1025 or eq. qty. 50/Kit (d) Intermediate Insert to Sandvik ordering code No. 800-08 T3 08M-I-G 1025 or eq. qty. 50/Kit. (e) Peripheral Insert to Sandvik ordering code No. 800-08 T3 08H-P-G 1025 or eq. qty. 50/Kit (f) Pads to Sandvik ordering code No. 800-07 AP1 or eq. qty. 50/Kit.

1. Sandvik Asia Ltd Pune 2. Taegutec India (P) Ltd. Banglore

Class P03CL012301 72990144 Pre Drilling Kit Dia 1.5/8" X 8" consisting of the

following:- (a) Adjustable Drill Holder to Sandvik ordering code No. 392.140277-500 3075 A or eq. qty. 01/Kit. (b) Slide to Sandvik ordering code No. 393.277-40 03 090 A or eq. qty. 01/Kit (c) Drill body to sandvikordering code No. 880-D 3800 L40-02 or eq. qty. 01/Kit. (d) Central Insert to Sandvik ordering code No. 880-07 04 06H-C-GM 1044 or eq. qty. 50/Kit (e) Peripaeral Insert to Sandvik ordering code No. 880-07 04 W06H-P-GM 4024 or eq. qty. 50/Kit.


Class P03CL012

April-2011 of 63


302 72990156 Indaxable Drilling Kit Dia 2.1/32" X 5"consisting of the following:- a) Adjustable Drill Holder to Sandvik ordering code No. 392.140277-500 3075 A or eq. qty. 01/Kit. (b) Slide to Sandvik ordering code No. 393.277-50 03 100 A or eq. qty. 01/Kit (c) Drill body to sandvikordering code No. 880-D 5100 L50-03 or eq. qty. 01/Kit. (d) Central Insert to Sandvik ordering code No. 880-08 05 08H-C-GM 1044 or eq. qty. 50/Kit (e) Peripaeral Insert to Sandvik ordering code No. 880-08 05 W08H-P-GM 4024 or eq. qty. 50/Kit.


Class P03CL012303 72990168 Indaxable Drilling Kit Dia 1.7/8" X 8" consisting of

the following:- a) Adjustable Drill Holder to Sandvik ordering code No. 392.140277-500 3075 A or eq. qty. 01/Kit. (b) Slide to Sandvik ordering code No. 393.277-40 03 090 A or eq. qty. 01/Kit (c) Drill body to sandvikordering code No. 880-D 4700 L40-05 or eq. qty. 01/Kit. (d) Central Insert to Sandvik ordering code No. 880-08 05 08H-C-GM 1044 or eq. qty. 50/Kit (e) Peripaeral Insert to Sandvik ordering code No. 880-08 05 W08H-P-GM 4024 or eq. qty. 50/Kit.


Class P03CL012304 72990170 HSS H&G , TIN COATED Helical Fluted Thread

M/C TAP SIZE 1-1/8"-12UNF-5B Shank dia 20mm, Sq. size 16mm, Sq. length 20mm, OAL 142mm.

1. Addison & Co. Ltd Ludhiana 1. Hittco Tools Ltd. Bangalore

Class P03CL013305 72990181 HSS M-35, H&G , TIN COATED Thread M/C TAP

SIZE 1-1/8"-12UNF-5B Shank dia 20mm, Sq. size 16mm, Sq. length 20mm, OAL 142mm.


Class P03CL013306 72990193 HSS, H&G , TIN COATED Helical Fluted,Thread

M/C TAP SIZE 1-1/8"-12UNF-3B Shank dia 20mm, Sq. size 16mm, Sq. length 20mm, OAL 142mm.


Class P03CL013

April-2011 of 63


307 72990200 Topping Serration Cutter for GM Crank Case as per Drg. No. M-0150

1. Mitsubishi Heavy Industries Ranipet

308 72990211 HSS H&G , TIN COATED, M/C TAP SIZE 1/2"-20UNF-2B

1. Zenith Birla India Ltd. Ludhiana Class P03CL013

309 72990223 HSS H&G , TIN COATED, M/C TAP SIZE 1"-14UNF-2B Class P03CL013

310 72990235 HSS H&G , TIN COATED, M/C TAP SIZE 5/8"-18UNF-2B Class P03CL013

311 72990247 HSS H&G , TIN COATED, M/C TAP SIZE 1-1/4"-12UNF-2B Class P03CL013




1. Hittco Tools Ltd. BangaloreClass P03CL013

314 72990272 HSS H&G , TIN COATED, M/C TAP SIZE 3/8"-NPTF Class P03CL013



316 72990296 HSS H&G TS TWIST DRILL SIZE DIA 1.40" 1. Zenith Birla India Ltd. Ludhiana Class P03CL013317 72990302 HSS H&G TS TWIST DRILL SIZE DIA 1" Std. 1. Addison & Co Ltd Ludhiana Class P03CL013318 72990314 HSS H&G TS TWIST DRILL SIZE DIA 1.380" Std. 1. Zenith Birla India Ltd Ludhiana

Class P03CL013319 72990326 HSS H&G TS TWIST DRILL SIZE DIA 1-11/64"

(29.6 mm).1. Addison & Co Ltd Ludhiana

Class P03CL013320 72990338 HSS H&G TS TWIST DRILL SIZE DIA 17.5 mm

(11/16").1. Addison & Co Ltd Ludhiana

Class P03CL013321 72990340 TUBULAR RAM AS PER DRG.NO.ET-0177

ALT.`X ' REF.NO.11 for CB-21RF.1. J.K Tools & Industries Patiala Class P03CL015

322 72990351 Kit of Side & face Cutter with Inserts Comprises of the following: (i) Side & Face Cutter similar to Sandvik ordering Code: N-331.32-200S 50 RMD 23.5 Qty. 01/Kit (ii) Insert L331.1A-145048 HWL 1025 Qty. 200Nos./Kit (iii) Inserts R331.1A-145048 HWL 1025 Qty. 200nos./kit.

1 . Sandvik Asia Ltd Pune 2. Taegutec India (P) Ltd. Banglore

Class P03CL012

April-2011 of 63


323 72990399 Kit for Milling Cutter consisting of Inserts , Insert screws , Torque wrench (Torx plus) & Molykote , as detailed below :a) Coated insert similar to Sandvik ordering code R390-18 06 08 H-PL 4230 Qty - 50 Nos.b) Insert screws for above similar to Sandvik ordering code 5513 020 - 29 Qty - 10 Nos.c) Torx wrench similar to Sandvik ordering code 5680 100 - 06 Qty - 02 Nos.d) Molykote similar to Sandvik ordering code 5683 010 - 01 Qty - 01 No.e)Face mill cutter dia 125 mm having ordering code R390-125 Q40-18M .Qty - 01 No.Note : Whole kit should be compatible .

1. Sandvik Asia Ltd Pune 2. Kennmetal Widia India Ltd Banglore

Class P03CL012324 72990405 Kit for Milling Cutter consisting of Inserts ,

Insert screws , Torque wrench (Torx plus) & Molykote , as detailed below :a) Coated insert similar to Sandvik ordering code R390-18 06 12M PM 4230 Qty - 150 Nos.b) Insert screws for above similar to Sandvik ordering code 5513 020 - 29 Qty - 20 Nos.c) Torx wrench similar to Sandvik ordering code 5680 100 - 06 Qty - 02 Nos.d) Molykote similar to Sandvik ordering code 5683 010 - 01 Qty - 01 No.e) Long edge Milling Cutter dia. 80mm having ordering code R390-080Q32-71L - Qty - 01 No.f) Face mill cutter dia 125 mm having ordering code R390-125 Q40-18M - Qty - 01 No.Note : Whole kit should be compatible .

1 . Sandvik Asia Ltd Pune

Class P03CL012325 72990417 H.S.S. H & G, Hand Tap Set (3 Pieces) Size : 3/8" -

16 UNC-3B as per BS 949 : Part - 2 : 19791. Jeewan deep Tool Industry Patiala


10 UNC -3B as per BS 949 : Part - 2 : 1979No records available 1. Hittco Tools Ltd. Bangalore


9UNC -3B as per BS 949 : Part - 2 : 19791. Zenith Birla India Ltd Ludhiana


27 NPT as per BS 949 : 1969 1. Addison & Co. Ltd Ludhiana

Class P03CL013

April-2011 of 63


329 72990454 H.S.S. H & G, Hand Tap Set (2 Pieces) Size : 1/4" - 18 NPT as per BS 949 : 1969

1. Forbes Gokak Ltd. New Delhi 2.Addison & Co. Ltd Ludhiana


14 NPT as per BS 949 : 1969 1. Forbes Gokak Ltd. New Delhi 2. Addison & Co. Ltd Ludhiana


14 NPT as per BS 949 : 1969 1. Forbes Gokak Ltd. New Delhi 2. Addison & Co. Ltd Ludhiana


18 NPT as per BS 949 : 1969 1. Addison & Co. Ltd Ludhiana

Class P03CL013333 72990491 H.S.S. H & G, Hand Tap Set (2 Pieces) Size : 1" -

11.1/2 NPT as per BS 949 : 1969 1. Addison & Co. Ltd Ludhiana 2. Forbes Gokak Ltd. New Delhi Class P03CL013

334 72990508 HSS H & G T.S DRILL of size Dia 32mm std as per IS 5103 - 1969


335 72990510 Set of HSS H & G T.S DRILL for the machining of Magnet Frames with the specification as per IS 5103 - 1969 with sizes mentioned below:a) Dia 21mm std Qty. 01 No. b) Dia 10.25mm std Qty. 01 No. c) Dia 8.5 mm std Qty. 01 No. d) Dia 6.75mm std Qty. 02 Nos.e) Dia 10 mm std Qty. 02 Nos.


Class P03CL013336 72990521 HSS H & G T.S DRILL of size Dia 1 .5/16" std

as per IS 5103 - 1969 / BS 328 : Part - I1. Addison & Co. Ltd Ludhiana

Class P03CL013337 72990533 HSS H & G T.S DRILL of size Dia 2 .5/32" std

as per IS 5103 - 1969 / BS 328 : Part - I1. Addison & Co. Ltd Ludhiana 2. Zenith Birla (India ) Ltd Ludhiana.

Class P03CL013338 72990545 HSS H & G T.S DRILL of size Dia 1.21/64" std

as per IS 5103 - 1969 / BS 328 : Part - I : 19861. Addison & Co. Ltd Ludhiana 2. Zenith Birla India Ltd. Ludhiana

Class P03CL013

April-2011 of 63


339 72990557 Set of HSS H & G T.S DRILL for the machining of ALCO Engine Blocks & Magnet Frames with the specification as per IS 5103 - 1969 / BS 328 : Part - I : 1986 with sizes mentioned below: a) Dia 27/64" std Qty. 02 Nos.b) Dia 5/16" std Qty. 02 Nos.c) Dia 21/32" std Qty. 01 No.

1. Addison & Co. Ltd Ludhiana 2. Zenith Birla India Ltd. Ludhiana

Class P03CL013340 72990569 HSS H & G T.S DRILL of size Dia 49/64" std

as per IS 5103 - 1969 / BS 328 : Part - I : 19861. Addison & Co. Ltd Ludhiana

Class P03CL013341 72990570 HSS H & G T.S DRILL of size Dia 1. 5/32" or

29.5mm std as per IS 5103 - 1969 / BS 328 : Part - I : 1986


Class P03CL013342 72990582 HSS H & G T.S DRILL of size Dia 1. 19/64"

std as per IS 5103 - 1969 / BS 328 : Part - I : 1986

1. Addison & Co. Ltd Ludhiana 1. Hittco Tools Ltd. Bangalore




Class P03CL013344 72990600 HSS H & G T.S DRILL of size Dia 2. 3/8" std

as per IS 5103 - 1969 / BS 328 : Part - I : 19861. Addison & Co. Ltd Ludhiana 1. Birla Precison Technologies

Ltd. LudhianaClass P03CL013

345 72990612 HSS H & G T.S DRILL of size Dia 2" std as per IS 5103 - 1969 / BS 328 : Part - I : 1986

1. Addison & Co. Ltd Ludhiana 2. Zenith Birla India Ltd. Ludhiana

Class P03CL013346 72990624 BACK SPOT FACE CUTTER dia 3.25" x 1 "

Width (As per Drg. No. M - 0033 Sr. No. 3) 1. Addison & Co. Ltd Ludhiana

2. Dies & Tools Ltd Kolkatta Class P03CL015

347 72990636 BACK SPOT FACE CUTTER dia 2. 7/8" x 1 " Width (As per Drg. No. M - 0033 Sr. No. 4)

1. Sunrise Tooling Systems P Ltd Faridabad 2. Dies & Tools Ltd Kolkatta

Class P03CL015

348 72990648 H.S.S. H & G, Hand Tap Set (3 Pieces) Size : 1. 1/8" - 12 UNF -3B as per BS 949 : Part - 2 : 1979


Class P03CL013349 72990650 H.S.S. H & G, Hand Tap Set (3 Pieces) Size : 1.

1/4" - 12 UNF -3B as per BS 949 : Part - 2 : 1979


Class P03CL013350 72990661 H.S.S. H & G, Hand Tap Set (3 Pieces) Size : 1.

1/8" - 12 UNF -5B as per BS 949 : Part - 2 : 1979


Class P03CL013

April-2011 of 63


351 72990673 H.S.S. H & G, Hand Tap Set (3 Pieces) Size : 1. 1/4" - 12 UNF -5B as per BS 949 : Part - 2 : 1979






Class P03CL013354 72990703 Set of HSS H & G T.S DRILL for the

machining of ALCO Engine Blocks with the specification as per IS 5103 - 1969 / BS 328 : Part - I : 1986 with sizes mentioned below:a) Dia 1/4" std Qty. 02 Nos. b) Dia 45/64" std Qty. 01 No. c) Dia 11/32" std Qty. 02 Nos.d) Dia 37/64" std Qty. 01 No. e) Dia 31/64" std Qty. 01 No.

1. Zenith Birla India Ltd. Ludhiana


as per IS 5103 - 1969 / BS 328 : Part - I : 1986






as per IS 5103 - 1969 / BS 328 : Part - I : 1986



as per IS 5103 - 1969 / BS 328 : Part - I : 1986


Class P03CL013359 72990752 HSS H & G T.S M/c REAMER of size

Dia 50.00 mm STD as per IS 5445 - 19781. Addison & Co. Ltd Ludhiana


Dia 1/2" STD as per IS 5445 - 19781. Jeewandeep Tools Industry Patiala


Dia 1.1/32" STD as per IS 5445 - 19781. Jeewandeep Tools Industry Patiala

Class P03CL013362 72990788 Set of HSS Bit for the use as Parting Tool

of Lathe and Back spot facing Bit with sizes mentioned below:a) Size 1" x 1" x 6" Qty 02 Nos.b) Size 1/2" x 1/2" x 6" Qty 01 No.

1. Jeewandeep Tools Industry Patiala

Class P03CL013

April-2011 of 63


363 72990790 HSS, H&G Extra long T.S Twist Drill of Size Dia 1″ x 14" FL x 21.1/2" OAL as per IS 7822-1983.


364 72990806 HSS, H&G Extra long T.S Twist Drill of Size Dia 1.5/8″ x 14" FL x 21.1/2" OAL as per IS 7822-1983.


Class P03CL013365 72990818 HSS, H&G Extra long T.S Twist Drill of Size Dia

9/16″ x 14" FL x 21.1/2" OAL as per IS 7822-1983. 1. Addison & Co. Ltd Ludhiana

Class P03CL013366 72990820 HSS, H&G Extra long T.S Twist Drill of Size Dia

1.3/4″ x 14" FL x 21.1/2" OAL as per IS 7822-1983.


Class P03CL013367 72990831 HSS, H&G Thread Hand Tap Set of 03 pieces of

size M10x1.5mm Pitch-STD as per IS6175:Part -2:1992.


Class P03CL013368 72990843 HSS, H&G Thread Hand Tap Set of 03 pieces of

size M8x1.25mm Pitch-STD as per IS 6175:Part -2:1992.


Class P03CL013369 72990855 HSS, H&G Thread Machine Tap of size 1.1/2″x

6TPI UNC x 8.1/2″ OAL as per BS 949:Part -2:1979. Class P03CL013

370 72990867 HSS, H&G Thread Machine Tap of size 2.1/2″x 8 UNC x 12″ OAL as per BS 949:Part -2:1979.


371 72990879 HSS, H&G Thread Machine Tap of size 1.1/4″x 12 UNF-5B STD as per BS 949:Part -2:1979.


372 72990880 HSS, H&G Thread Helical Machine Tap of size 1.3/8″x 12 UNF-3B x 4″FL x 10″ OAL (Extra Long) as per BS 949:Part -2:1979. Class P03CL013

373 72990892 Carbide Brazed T.S. Twist Drill of size Dia 1/2″ STDas per IS 8306-1976.


374 72990909 Carbide Brazed T.S. Twist Drill of size Dia 3/4″ STD as per IS 8306-1976.


375 72990910 Carbide Brazed T.S. Twist Drill of size Dia 1″ STD as per IS 8306-1976.


376 72990960 TS Drill 29/32″, M35, MT-3 Std. 1. Addison & Co. Ltd Ludhiana Class P03CL013377 72990971 Gear Hob Module 1016, Class-B, ASP2052 Class P03CL014378 72990983 HSS, TS Extra Long M/C Reamer size:

0.375″/0.376″ x 12″ Long 1. Zenith Birla India Ltd. Ludhiana

Class P03CL013379 72990995 HSS, TS Extra Long M/C Reamer size:

0.3771″/0.3778″ x 12″ Long No records available 1. Birla Precison &

Technologies Ludhiana Class P03CL013380 72991008 HSS, TS Drill 23/64″ x 16″ Long. 1. Hittco Tools Ltd. Bangalore Class P03CL013

April-2011 of 63


381 72991010 HSS, TS Drill 29/64″ x 16″ Long. 1. Addison & Co. Ltd Ludhiana Class P03CL013382 72991021 Kit for single Edge Fine Boring Kit for boring

consisting of the fllowing: (1) Coated Insert similar to Sandvik ordering Code No. TPMT 110304 - PF - 4025 Qty. 200/Kit (2) Insert Screw similar to Sandvik ordering code No. 5513 020 03 Qty. 20/Kit. Note: above items should be comatible with Cartridge to Sandvik ordering code No. 391.38U - 2-TP 11A & Fine Boring Head to Sandvik ordering code No. 391.38 - 2 - 046 28 043A.

1. Sandvik Asia Ltd. Pune

Class P03CL012383 72991033 HSS, M2, H&G T.S. Twist Drill Dia 3.5/8″ as per

BS;328:Part-1:1986.1. Addison & Co. Ltd Ludhiana

Class P03CL013384 72991045 Kit for Boring Magnet Frame as detailed below:

(a) Basic Holder/ISO Adapter similar to Sandvik ordering code: C8 - 390.140 - 50 070 Qty.-01 No. (b) Adapter similar to Sandvik ordering code: C8 - 391.05HD - 40 040 Qty.-01 No. (c) BAR similar to Sandvik ordering code R391.B03R - 40F 053A Qty. 01No. (d) Slide similar to Sandvik ordering code: R391.B01F - 020 qty.- 01 No. (e) Fine Boring Head similar to Sandvik ordering code: 391.38A - 2 - 046 28 043A Qty. 01 No. (f) Cartridge similar to sandvik ordering code: 91.38A - 2 - C09a Qty. 02 Nos. (g) Insert similar to Sandvik ordering code CCMT 09T3 04 PF CCMT3 (2.5) 1 PF4025 Qty. 100 Nos. (h) Insert Screw similar to Sandvik ordering code 5513 020 - 10 Qty. 20 Nos. (i) Key Torex similar to Sandvik ordering code 416.1-864 Qty. - 04 Nos. (J) Screw for Cartridges similar to Sandvik ordering code 5514020 - 07 Qty. - 10Nos. (k) Key similar to Sandvik ordering code 265.2 - 821 Qty. -04 Nos.


Class P03CL012

April-2011 of 63


385 72991057 Kit for Boring of Magnet Frames as detailed below :a) BASIC HOLDER / ISO ADAPTER similar to Sandvik ordering code C6-390.140 - 50 080 Qty - 01 No. b) ADAPTER similar to Sandvik ordering code C6-391.38A - 0 - 096 45A Qty - 01 No. d) SLIDE similar to Sandvik ordering code 391.38A-0-160 022A Qty - 01 No. e) FINE BORING HEAD similar to Sandvik ordering code 391.38A-2-046 28 043A Qty - 01 No. f) CARTRIDGE similar to Sandvik ordering code 391.38A - 2 - C09A Qty - 02 Nos. g) INSERT similar to Sandvik ordering code CCMT 09 T3 04 PF CCMT 3 (2.5) 1 PF 4015 Qty - 100 Nos. h) INSERT SCREW similar to Sandvik ordering code 5513 020 - 10 Qty - 20 Nos. i) KEY TORX similar to Sandvik ordering code 416.1 - 864 Qty - 04 Nos. j) SCREW FOR CARTRIDGES similar to Sandvik ordering code 5514 020 - 07 Qty - 10 Nos. k) KEY similar to Sandvik ordering code 265.2 - 821 Qty - 04 Nos. l) LOCKING SCREW similar to Sandvik ordering code 5519 026 - 06 Qty - 10 Nos. Note : Since the item is being procured in kit , the whole kit should be procured from one


Class P03CL012

April-2011 of 63


386 72991069 U-Drill kit for dia 49/64" similar to Sandvik ordering code comprising of the following : a) U-drill for dia 49/64" L/D 3 similar to Sandvik ordering code TM880 - 444639 - Qty - 01 No. b) Aboptor for above for ISO 50 spindle taper similar to Sandvik ordering code C6 - 390.140 - 50 030 - Qty - 01 No.c) Peripheral Inserts similar to Sandvik ordering code 880 - 0303 W 06H - P - LM 4034 - Qty - 50 Nos. d) Central Inserts similar to Sandvik ordering code 880 - 030305H - C - LM 1044 - Qty - 50 Nos. e) Screws for the inserts similar to Sandvik ordering code 5513 020 - 33 - Qty - 20 Nos. f) Key for tightening / loosening the insert screws similar to Sandvik ordering code 5680 046 - 03 - Qty - 04 Nos. Note : Since the item is being procured in kit , the whole kit should be procured from one source only.


Class P03CL012387 72991070 Expandable Two Cutters Block (Cam Boring

Enlarged Size) As per Drg. No. M-0119.1. Sunrise Tooling Systems Faridabad

Class P03CL015388 72991082 Kit for Tapping Attachment for 7/8*9UNC

having Shank Dia 16 mm and Square Size 12.5 mm similar to Sandvik ordering code comprising of the following : a) Basic Holder for ISO 50 spindle taper Sandvik ordering code C6-390.140-50 030 - Qty - 01 No. b) Tap Adaptor similar to Sandvik ordering code 393.03-SES3-D160*125 - Qty - 02 Nos. c) TAP Holder for above similar to Sandvik ordering code C6-391.61-03 196 - Qty - 01 No. Note : Since the item is being procured in kit , the whole kit should be procured from one source only.


Class P03CL012

April-2011 of 63


389 72991094 Kit for Tapping Attachment for 1'3/8*12UNF having Shank Dia 25 mm and Square Size 20 mm similar to Sandvik ordering code comprising of the following : a) Basic Holder for ISO 50 spindle taper Sandvik ordering code C6-390.140-50 030 - Qty - 01 No. b) Tap Adaptor similar to Sandvik ordering code 393.03-SES3-D250*200 - Qty - 02 Nos. c) TAP Holder for above similar to Sandvik ordering code C6-391.61-03 196 - Qty - 01 No. Note : Since the item is being procured in kit , the whole kit should be procured from one source only.

1. Seco Tools India(P) Ltd Pune


having Shank Dia 09 mm and Square Size 7.1 mm similar to Sandvik ordering code comprising of the following : a) Basic Holder for ISO 50 spindle taper Sandvik ordering code C6-390.140-50 030 - Qty - 01 No. b) Tap Adaptor similar to Sandvik ordering code 393.03-SES2-D090*071 - Qty - 02 Nos.c) TAP Holder for above similar to Sandvik ordering code C6-391.61-02 131 - Qty - 01 No. Note : Since the item is being procured in kit , the whole kit should be procured from one source only.



having Shank Dia 12.5 mm and Square Size 10 mm similar to Sandvik ordering code comprising of the following : a) Basic Holder for ISO 50 spindle taper Sandvik ordering code C6-390.140-50 030 - Qty - 01 No. b) Tap Adaptor similar to Sandvik ordering code 393.03-SES2-D125*100 - Qty - 02 Nos.c) TAP Holder for above similar to Sandvik ordering code C6-391.61-02 131 - Qty - 01 No. Note : Since the item is being procured in kit , the whole kit should be procured from one source only.


Class P03CL012

April-2011 of 63


392 72991124 Kit for Tapping Attachment for 1'1/8*12 having Shank Dia 20 mm and Square Size 16 mm similar to Sandvik ordering code comprising of the following : a) Basic Holder for ISO 50 spindle taper Sandvik ordering code C6-390.140-50 030 - Qty - 01 No. b) Tap Adaptor similar to Sandvik ordering code 393.03-SES3-D200*160 - Qty - 02 Nos.c) TAP Holder for above similar to Sandvik ordering code C6-391.61-03 196 - Qty - 01 No. Note : Since the item is being procured in kit , the whole kit should be procured from one source only.


Class P03CL012393 72991136 Kit for Milling Cutter consisting of Cutter ,

Inserts , Cassattes , Insert screws , Insert Keys , Wedges , Wedge Screws & Wedge Keys as detailed below : a) Milling cutter similar to Sandvik ordering code N331.32-125S40FM Qty - 01 No. b) Coated insert similar to Sandvik ordering code N331.1A-08 45 08H - PM 4230 Qty - 100 Nos. c) Cassate for Right Side similar to Sandvik ordering code 5321 240-03 Qty - 05 Nos. d) Cassate for Left Side similar to Sandvik ordering code 5321 240-04 Qty - 05 Nos. e) Insert screws similar to Sandvik ordering code 5513 020 - 24 Qty - 25 Nos. f) Insert key similar to Sandvik ordering code 5680 046 - 04 Qty - 06 Nos. g) Wedge similar to Sandvik ordering code 5431 105 - 02 Qty - 10 Nos. h) Wedge Screw similar to Sandvik ordering code339 - 831 Qty - 10 Nos. i) Wedge Key similar to Sandvik ordering code 265.2 - 817 Qty - 04 Nos.Note : Since the item is being procured in kit , the whole kit should be procured from one source only.


Class P03CL012

April-2011 of 63


394 72991148 Kit for Boring consisting of Tool Holder , Inserts , Shim , Shim screws , Keys , Wedges & Clamp Set as detailed below :a) Tool Holder similar to Sandvik ordering code DCLNL - 3232 P19 Qty - 02 Nos. b) Coated insert similar to Sandvik ordering code CNMG - 190612 - PR CNMG 643 - PR 4225 Qty - 40 Nos. c) SHIM similar to Sandvik ordering code 5322 236 - 01 Qty - 10 Nos. d) SHIM SCREW similar to Sandvik ordering code 5513 020 - 07 Qty - 10 Nos. e) KEY similar to Sandvik ordering code 5680 043 - 14 Qty - 02 Nos. f) CLAMP SET similar to Sandvik ordering code 5412 028 - 041 Qty - 02 Nos. Note : Since the item is being procured in kit , the whole kit should be procured from one source only.


Class P03CL012

April-2011 of 63


395 72991150 Kit for Milling Cutter consisting of Cutter , Inserts , Cassattes , Wedge Screws , Insert Screw Driver , Insert Screw Torx Plus , Wedges , Wedge Torque Wrench & Insert Screws as detailed below : a) Milling cutter similar to Sandvik ordering code N331.32-250S50LM20.0 Qty - 01 No. b) Coated insert similar to Sandvik ordering code N331.1A-11 50 08H PM 4230 Qty - 80 Nos. c) Cassate for Right Side similar to Sandvik ordering code 5321 240-07 Qty - 10 Nos. d) Cassate for Left Side similar to Sandvik ordering code 5321 240-08 Qty - 10 Nos. e) Wedge Screw similar to Sandvik ordering code 339 - 831 Qty - 10 Nos. f) Key for Insert Screw similar to Sandvik ordering code 5680.046-02 Qty - 05 Nos. g) Wedge similar to Sandvik ordering code 5431 105-04 Qty - 10 Nos. h) WEDGE TORQUE WRENCH similar to Sandvik ordering code 265.2-817 Qty - 05 Nos. i) Insert screws similar to Sandvik ordering code 5513 020 - 29 Qty - 30 Nos. Note : Since the item is being procured in kit , the whole kit should be procured from one source only.

No records available

Class P03CL012396 72991161 Kit for Chamfering Cutter consisting of Cutter ,

Inserts , Insert Screws & Key for Insert Screws as detailed below : a) Chamfering Cutter similar to Sandvik ordering code R215.64-32A32-4512 Qty - 01 No. b) Coated insert similar to Sandvik ordering code SPMT 12 04 08-WH 4030 Qty - 30 Nos. c) Insert screws similar to Sandvik ordering code 5513 020 - 29 Qty - 30 Nos. d) Key for Insert Screws similar to Sandvik ordering code 5680 100 - 06 Qty - 05 Nos. Note : Since the item is being procured in kit , the whole kit should be procured from one source only.


Class P03CL012

April-2011 of 63


397 72991173 Kit for High shear face Milling Cutter consisting of Cutter , Inserts , Seats , Seat Screws , Key for Seat Screws , Screws , Key for Screws , Nuts , Clamps , Springs , Bayonet Washer , Indexing Lever , Seat for Wiper , Clamp Removal Key for Bayonet Washer & Locking Key as detailed below : a) Milling cutter similar to Sandvik ordering code R260.7 - 125 - 30 Qty - 01 No. b) Coated insert similar to Sandvik ordering code LNCX 18 06 AZ R - 11 2040 Qty - 50 Nos. c) SEAT similar to Sandvik ordering code 260.7-830M Qty - 05 Nos. d) SEAT SCREW similar to Sandvik ordering code 3212 010 - 310 Qty - 10 Nos. e) KEY FOR SEAT SCREW similar to Sandvik ordering code 265.2 - 821 Qty - 02 Nos. f) SCREW similar to Sandvik ordering code 3214 010 - 409 Qty - 10 Nos. g) KEY FOR S.No.(f) similar to Sandvik ordering code 3021 010 - 040 Qty - 02 Nos. h) NUT similar to Sandvik ordering code 260.7 - 842 Qty - 05 Nos. i) SCREW similar to Sandvik ordering code 3214 010 - 408 Qty - 10 Nos.


Class P03CL012

April-2011 of 63


398 72991185 Kit for Boring of Magnet Frames as detailed below : a) BASIC HOLDER / ISO ADAPTER similar to Sandvik ordering code C8-390.140 - 50 070 Qty - 01 No. b) ADAPTER similar to Sandvik ordering code C8-391.05HD - 40 040 Qty - 01 No. c) BAR similar to Sandvik ordering code R391. B01R - 40D 053A Qty - 01 No. d) SLIDE similar to Sandvik ordering code R391. B01F - 020 Qty - 01 No. e) FINE BORING HEAD similar to Sandvik ordering code 391.38A-2-046 28 043A Qty - 01 No. f) CARTRIDGE similar to Sandvik ordering code 391.38A - 2 - C09A Qty - 02 Nos. g) INSERT similar to Sandvik ordering code CCMT 09 T3 04 PF CCMT 3 (2.5) 1 PF 4015 Qty - 100 Nos. h) INSERT SCREW similar to Sandvik ordering code 5513 020 - 10 Qty - 20 Nos. i) KEY TORX similar to Sandvik ordering code 416.1 - 864 Qty - 04 Nos. j) SCREW FOR CARTRIDGES similar to Sandvik ordering code 5514 020 - 07 Qty - 10 Nos. i) KEY similar to Sandvik ordering code 265.2 - 821 Qty - 04 Nos. i) LOCKING SCREW similar to Sandvik ordering code 5519 026 - 06 Qty - 10 Nos. Note : Since the item is being


Class P03CL012399 72991197 Solid Carbide Cylinderical Shank End Mill

Cutter - Dia. 20mm similar to Sandvik ordering code R216.34 - 20 030 - AC 26 N 1020

1.Taegutec India (P) Ltd. Banglore

Class P03CL012400 72991203 HSS Counter Sunk 45 deg. Cutter Similar to Titex

ordering code TITEX PLUS HSS E7819 * 50 5fa

Walter India Tools & Machines Pvt. Ltd. Pune

Class P03CL012401 72991215 HSS Counter Sunk 45 deg. Cutter Similar to Titex

ordering code TITEX PLUS E6819 TIN * 31 90 Deg HSS

1. Iscar Ltd

Class P03CL012

April-2011 of 63


402 72991227 Kit for Tapping Attachment for M20 & M24 taps similar to SANDVIK ordering code comprising of the following : (a) Basic Holder for ISO 50 spindle taper similar to Sandvik ordering code C6-390.140-50 030 - Qty - 01 No. (b) Tap Adaptor similar to Sandvik ordering code C6-391.61-03 196 - Qty - 01 No. (c) TAP Holder for above similar to Sandvik ordering code 393.03-SES 3 D160x120 - Qty - 02 Nos. (d) TAP Holder for above similar to Sandvik ordering code 393.03-SES3 D140X112 - Qty - 02 Nos. (e) TAP Holder for above similar to Sandvik ordering code 393.03-SES 3 D180x140- Qty - 02 Nos. (f) TAP Holder for above similar to Sandvik ordering code 393.03-SES 3 D180x145 - Qty - 02 Nos. Note : Since the item is being procured in kit , the whole kit should be procured from one source only.


Class P03CL012

April-2011 of 63


403 72991239 Kit for Milling Cutter consisting of Cutter , Inserts , Protection Insert Screw ,Insert Screw , Key (Torx Plus) , Adaptor for the cutter & Molykote as detailed below : a) Milling cutter similar to Sandvik ordering code SRA216-32M32 -070 Qty - 01 No. b) Coated insert similar to Sandvik ordering code APMT 16 04 08 M-4240 Qty - 50 Nos. c) Coated insert similar to Sandvik ordering code RA216-32 06 M-M 1030 Qty - 50 Nos.d) Protection Insert screw similar to Sandvik ordering code 5513 020-09 Qty - 20 Nos.e) Insert screw similar to Sandvik ordering code 5513 020-07 Qty - 20 Nos.f) Key (Torx Plus) similar to Sandvik ordering code 5680 046-02 Qty - 5 Nos.g) Key (Torx Plus) similar to Sandvik ordering code 5680 048-04 Qty - 5 Nos.h) Adaptor for the cutter similar to Sandvik ordering code A392.45 20 - 50 32 101 Qty - 01 No.i) Molykote similar to Sandvik ordering code 5683 010-01 Qty - 5 Nos. Note : The whole kit should be procured from one source


Class P03CL012

April-2011 of 63


404 72991240 Kit for Boring consisting of Catridge, Slide Extension , Adaptor , Insert , Screw for Catridge , Locking Screw , Key for the Fine boring head , Insert Screw & Molykote as detailed below :a) Catridge similar to Sandvik ordering code R825B-AF17STUC0902A Qty - 04 No.b) Slide Extension similar to Sandvik ordering code 825B-036A Qty - 01 No.c) Adaptor similar to Sandvik ordering code C4-R825B-AAC066A Qty - 01 No.d) Coated insert similar to Sandvik ordering code TCMT 09 02 04-UM 1515 Qty - 100 Nos.e) Screw for Catridge similar to Sandvik ordering code 5513 010-07 Qty - 20 Nosf) Locking Screw similar to Sandvik ordering code 5519 026-11 Qty - 20 Nos.. g) Key for the Fine boring head similar to Sandvik ordering code 265.2-817 Qty - 5 Nos.g) Key for the Fine boring head similar to Sandvik ordering code 265.2-817 Qty - 5 Nos.h) Insert Screw similar to Sandvik ordering code 5513 020-05 Qty - 40 Nos.i) Molykote similar to Sandvik ordering code 5683 010-01 Qty - 05 Nos.Note : (a) Above items should be compatible with Basic


Class P03CL012405 72991252 Basic Holder for CNC Horizontal Boring and

Milling Machine Similar to Sandvik Ordering code 392.14042-50 02 060

1. Kennametal India Ltd. Banglore



1. Kennametal India Ltd. Banglore 1. Kennametal India Ltd. Banglore








Milling Machine Similar to ISCAR Ordering code DIN 69871 50 MT1 X 45


Class P03CL012

April-2011 of 63


410 72991306 Carbide drill dia 17/32" having overall length of 134 mm , Flute Length of 59 mm with cylindrical shank 0f 18 mm with chamfer at 59mm of flute length and through coolant facility Similar to Sandvik Ordering code TM840.2-449 776 Note : Above items should be compatible with Basic Holder for ISO 7388/1 ISO 50 spindle taper similar to Sandvik Ordering Code No. A1B20-50 18 063. Class P03CL012

411 72991318 Carbide drill dia 27/64" having overall length of 116 mm , Flute Length of 42 mm with cylindrical shank 0f 16 mm with Chamfer at 42mm of flute length and through coolant facility Similar to Sandvik Ordering code TM840.2-449758 Note : Above items should be compatible with Basic Holder for ISO 7388/1 ISO 50 spindle taper similar to Sandvik Ordering Code No. A1B20-50 16 063.


Class P03CL012412 72991320 Kit 30degree chamfering cutter consisting of

cutter, inserts, key(Torx Driver) & insert as detailed below:- (a) 30 degree chamfering as per Drg. No. M-0111 Qty./ Set - 01 No. (b) Coated insert compatible to the above as per Drg. No. M - 0111Qty/Set - 100 Nos. (c) Key(Torx Driver) for the above Qty/Set - 03Nos. (d) Insert Screw for the Qty/Set - 25 Nos. Note :- All the components of the set should be compatible to ech other.


Class P03CL012

April-2011 of 63


413 72991331 Kit Square Shoulder Milling Cutter Dia 100 mm for Machining of welded material for the manufacturing of ALCO Engine Blocks consisting of cutter inserts, clamp screw and Key as detailed below:- (a) Square Shoulder Milling Cutter Dia 100 mm similar to Kennametal ordering code 80 541 108 qty/Set - 01 No. (b) Coated Insert compatible to the above cutter similar to Kennametal ordering code TPAN 1603 AER TN7536 Qty/Set 100Nos. (c) Axial support for the above cutter similar to Kennametal ordering code 73 084 704 qty/Set - 10 Nos. (d) Wedge for the above cutter similar to Kennametal ordering code 73 084 734 qty/Set - 10 Nos. (e) Wedge for insert similar to Kennametal ordering code 73 084 724 qty/Set - 10 Nos. (f) Wedge screw similar to Kennametal ordering code 214 85 740 Qty/Set - 25 Nos. (g) Key for the above Qty/Set - 03 Nos. Note - All the components of the set should be compatible to ech other.


Class P03CL012

April-2011 of 63


414 72991343 Kit grooving operation in the MB cap consisting of the constituents as detailed mentioned below:- (a) Milling cutter with serrated cassettes similar to Sandvik ordering code N331.32-082S27EMQ Qty/Set - 01 No. (b) Coated insert similar to Sandvik Medium geometry for steel and P30 grade ordering code RCKT 10T3M0-PM4230 Qty./Set-150 Nos. (c) Varilock Adaptor for above similar to Sandvik ordering code 391.10-2763030 Qty/Set - 01No. (d) Insert Screw similar to Sandvik ordering code 5513020-09 Qty/Set - 20Nos. (e) Key for above similar to Sandvik ordering code 5680 046-02 Qty/Set - 02 Nos. (f) Spacer set similar to Sandvik ordering code 5549 091-031 Qty/Set - 01 No. Note (1)Above should be compatible to Basic Holder No. 390.140-50 63 027 (2) All the components of the should be compatible to each other.


Class P03CL012

April-2011 of 63


415 72991355 Set for 125 mm diameter Square Shoulder Milling Cutter for rough machining og welded material consisting of the following :- (a) Square Shoulder Milling Cutter dia 125 mm, arbor size -40 mm, No. of insert pockets - 8 Nos. with thicker carbide shim protected Qty/Set - 01 No. (b) Four Edged coated Insert with heavy roughing geometry and P30 grade compatible to the above cutter similar to Sandvik ordering Code R290.90-12T320M-PH 4230 Qty/Set - 150 Nos. (c) Insert Screw for the above similar to Sandvik ordering Code 5513 020 - 32 Qty/Set -20 Nos. (d) Insert Key (Torx Plus) for the above similar to Sandvik ordering Code 5680 048 - 01 Qty/Set - 2 Nos. (e) Shim for the above similar to Sandvik ordering Code 5322 470-01 Qty/Set - 30Nos. (f) Shim for the above similar to Sandvik ordering Code 5512 090-09 Qty/Set - 20Nos. (g) Key for shim screw for the above similar to Sandvik ordering Code 5680 010-01 Qty/Set-2 Nos. Note :- all the components of set should be compatible to ech other.


Class P03CL012416 72991367 Set for Long Edge type milling cutter Dia 80 mm

for rough machining of welded material consisting of cutter, Inserts, Insert Screw, Torque wrench (Torx plus) as detailed below:- (a) Long Edge type milling cutter Dia 80 mm similar to Sandvik ordering code R390-080C8-71L Qty/Set-01No. (b) Insert for the above cutter similar to Sandvik medium geometry for steel and P30 grade ordering code R390-180616M-PM 4230 Qty/set-150 Nos. (c) Insert Screw for above similar to Sandvik ordering code 5513020-29 qty/set-40 Nos. (d) Insert Key (Torx Plus) similar to Sandvik ordering code 5680 100-06 qty/set - 02 Nos. Note: above cutter should be compatible to basic holder No. C8-390.140-50 070.2 all the components of the set should be compatible to each other


Class P03CL012

April-2011 of 63


417 72991379 Set for forming tool consisting of Inserts, Insert Holders, Screws & key as detailed below: (a) Insert for forming tool similar to Premier Form tools ordering code F30 N4.0 ISO RS 21 qty/set -10 Nos. (b) Insert Holder with through collant facility similar to Premier Form Tools ordering code: F30 S 25 B 029 x 85-1 qty/set-01 No. (C) Screw for holding above forming Inserts Qty./set - 10 Nos. (d) Key for above screws qty/set - 2 Nos. Note: All the components of the sets should be compatible to each other

Class P03CL012418 72991380 Set for 160 mm Square Shoulder Milling Cutter for

rough machining of welded material for the remanufacturing of ALCO Engine Blocks consisting of the following: (a) Square Shoulder Face Milling Cutter dia -160 mm arbor size - 40 mm, No. of Inseert pocket - 8 Nos. with thicker carbide Shim protected qty/Set -01No. (b) Four Edged Coated Insert with heavy roughing geometary and P30 grade compatible to the above cutter similar to Sandvik ordering code: R290.90-12T320M-PH 4230 qty/set -150Nos. (c) Insert screw for the above similar to Sandvik ordering code 5513 020-32 qty/set-25 Nos. (d) Insert Key (Torx Plus) for the above similar to Sandvik ordering code 5680 048-01Qty/Set- 2 Nos. (e) Shim for the above similar to Sandvik ordering code 5322 470-01 qty/set - 30 Nos. (f) Shim screw for the above similar to Sandvik ordering code: 5512 090-09 qty/set - 25 Nos. (g) Key for shim screw for the above similar to Sandvik ordering code 5680 010-01 qty/set- 2 Nos. Note : All the component of the set should be compatible to each other.


Class P03CL012419 76981071 ENDLESS BIMETAL BAND SAW BLADE SIZE:

3910 X 12 X 0.9 MM THICK 10/14 TPI.1 Wikus- Niran Saws Mumbai

Class P03CL011

April-2011 of 63

item wise vendor directory - indian railway 03...banglore class p03cl013 50 72046120 coated carbide...

Documents