iso update · iso update, supplement to iso focus -- june 2016 3. iso 7010:2011/cd amd 232...
TRANSCRIPT
ISO Update Supplement to ISOfocus
June 2016
ISO Update, Supplement to ISO Focus -- June 2016 1
International Standards in process
An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an Interna-tional Standard takes the form of a committee draft (CD) - this is cir-culated for study within an ISO technical committee. When consensus has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same.
CD registered
Period from 01 May to 31 May 2016
These documents are currently under consideration in the technical committee.
They have been registred at the Central Secretariat.
TC 10 Technical product documentation
ISO/CD 21143 Requirements of virtual assembly test for me-chanical products
ISO/CD 21600 Technical product documentation (TPD) — General requirements of mechanical product digital manual
TC 17 Steel
ISO/CD 4954 Steels for cold heading and cold extruding
ISO/CD 15835-1
Steels for the reinforcement of concrete — Reinforcement couplers for mechanical splices of bars — Part 1: Requirements
ISO/CD 15835-2
Steels for the reinforcement of concrete — Reinforcement couplers for mechanical splices of bars — Part 2: Test methods
TC 22 Road vehicles
ISO/CD 6469-2 Electrically propelled road vehicles — Safety specifications element — Part 2: Vehicle opera-tional safety
ISO/CD 12405-4
Electrically propelled road vehicles --Test spec-ification for lithium-ion traction battery packs and systems — Part 4: Performance testing
TC 23 Tractors and machinery for agriculture and forestry
ISO/CD 4254-6 Agricultural machinery — Safety — Part 6: Sprayers and liquid fertilizer distributors
ISO/CD 10625 Equipment for crop protection — Sprayer noz-zles — Colour coding for identification
ISO/CD 19932-1
Equipment for crop protection — Knapsack sprayers — Part 1: Safety and environmental requirements
ISO/CD 19932-2
Equipment for crop protection — Knapsack sprayers — Part 2: Test methods
TC 31 Tyres, rims and valves
ISO/CD 4250-1 Earth-mover tyres and rims — Part 1: Tyre designation and dimensions
ISO/CD 4250-2 Earth-mover tyres and rims — Part 2: Loads and inflation pressures
TC 34 Food products
ISO/CD 6888-3 Microbiology of the food chain — Horizontal method for the enumeration of coagulase-posi-tive staphylococci (Staphylococcus aureus and other species) — Part 3: Detection and MPN technique for low numbers
ISO/CD 16140-3
Microbiology of the food chain — Method validation — Part 3: Protocol for the verification of reference and validated alternative methods implemented in a single laboratory
TC 43 Acoustics
ISO/DTS 11819-3
Acoustics — Measurement of the influence of road surfaces on traffic noise — Part 3: Refer-ence tyres
ISO/CD 12913-2
Acoustics — Soundscape — Part 2: Data collection
ISO/CD 13471-1
Acoustics — Temperature influence on tyre/road noise measurement — Part 1: Correction for temperature when testing with the CPX method
ISO/CD 19488 Acoustics — Acoustic classification scheme for dwellings
TC 45 Rubber and rubber products
ISO/CD 2004 Natural rubber latex concentrate — Centri-fuged or creamed, ammonia-preserved types — Specifications
TC 58 Gas cylinders
ISO/CD 10460 Gas cylinders — Welded carbon-steel gas cylinders — Periodic inspection and testing
TC 85 Nuclear energy, nuclear technologies, and radiological protection
ISO/CD 12749-5
Nuclear energy, nuclear technologies, and radiological protection — Vocabulary — Part 5: Reactors
TC 92 Fire safety
ISO/CD 1716 Reaction to fire tests for products — Deter-mination of the gross heat of combustion (calorific value)
ISO/CD 19677 Guidelines for assessing the adverse impact of wildland fires on the environment
TC 106 Dentistry
ISO/CD 7405 Dentistry — Evaluation of biocompatibility of medical devices used in dentistry
ISO/CD 19023 Dentistry — Orthodontic anchor screws
TC 108 Mechanical vibration, shock and condi-tion monitoring
ISO/DTR 19664
Human response to vibration - Guidance and terminology for instrumentation and equipment for the assessment of daily vibration exposure in the workplace according to the requirements of health and safety
TC 114 Horology
ISO/CD 18684 Timekeeping instruments — Watch external parts made of hard materials — General re-quirements and test methods
TC 127 Earth-moving machinery
ISO/CD 20474-15
Earth-moving machinery — Safety — Part 15: Requirements for compact tool carriers
TC 145 Graphical symbols
2 ISO Update, Supplement to ISO Focus -- June 2016
ISO/CD 28564-3
Public information guidance systems — Part 3: Guidelines for the design and use of informa-tion index signs
ISO 7010:2011/CD Amd 199
Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 199: Safety sign W043: Crushing of foot by force applied from above
ISO 7010:2011/CD Amd 200
Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 200: Safety sign W044: Crushing of hand by force applied from above
ISO 7010:2011/CD Amd 201
Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 201: Satefy sign W045: Crushing of hand by force applied from side
ISO 7010:2011/CD Amd 202
Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 202: Safety sign W046: Crushing of leg by force applied from side
ISO 7010:2011/CD Amd 203
Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 203: Safety sign W047: Crushing of whole body by excavator
ISO 7010:2011/CD Amd 204
Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 204: Safety sign W048: Crushing of whole body by loader bucket
ISO 7010:2011/CD Amd 205
Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 205: Safety sign W049: Crushing of whole body by machine rollover (no ROPS)
ISO 7010:2011/CD Amd 206
Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 206: Safety sign W050: Crushing of whole body by machine rollover (with ROPS)
ISO 7010:2011/CD Amd 207
Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 207: Safety sign W051: Crushing of whole body by runaway bale
ISO 7010:2011/CD Amd 208
Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 208: Safety sign W052: Crushing of whole body by runover or backover by excavator
ISO 7010:2011/CD Amd 209
Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 209: Safety sign W053: Crushing of whole body by runover or backover by tractor
ISO 7010:2011/CD Amd 210
Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 210: Safety sign W054: Crushing of whole body and pinning by force applied from above
ISO 7010:2011/CD Amd 211
Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 211: Safety sign W055: Dismemberment by front engine mower or lawn tractor operat-ing in forward direction
ISO 7010:2011/CD Amd 212
Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 212: Safety sign W056: Dismemberment by front engine mower or lawn tractor operat-ing in rearward direction
ISO 7010:2011/CD Amd 213
Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 213: Safety sign W057: Entanglement of arm in belt drive
ISO 7010:2011/CD Amd 214
Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 214: Safety sign W058: Entanglement of arm in machinery, general
ISO 7010:2011/CD Amd 215
Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 215: Safety sign W059: Entanglement of arm in rotating gears
ISO 7010:2011/CD Amd 216
Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 216: Safety sign W060: Entanglement of arm in rotating horizontal auger
ISO 7010:2011/CD Amd 217
Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 217: Safety sign W061: Entanglement of arm in rotating vertical auger
ISO 7010:2011/CD Amd 218
Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 218: Safety sign W062: Entanglement of fingers and hand in cotton stripper cleaner drive
ISO 7010:2011/CD Amd 219
Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 219: Safety sign W063: Entanglement of hand in belt drive
ISO 7010:2011/CD Amd 220
Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 220: Safety sign W064: Entanglement of hand in chain drive
ISO 7010:2011/CD Amd 221
Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 221: Safety sign W065: Entanglement of hand in toothed belt drive
ISO 7010:2011/CD Amd 222
Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 222: Safety sign W066: Entanglement of leg in cotton picker spindles
ISO 7010:2011/CD Amd 223
Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 223: Safety sign W067: Entanglement of leg in rotating horizontal auger
ISO 7010:2011/CD Amd 224
Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 224: Safety sign W068: Entanglement or severing of leg or foot in trencher
ISO 7010:2011/CD Amd 225
Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 225: Safety sign W069: Entanglement of whole body by rotating shaft
ISO 7010:2011/CD Amd 226
Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 226: Safety sign W070: High pressure fluid injection into flesh
ISO 7010:2011/CD Amd 227
Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 227: Safety sign W071: High pressure spray, erosion of flesh
ISO 7010:2011/CD Amd 228
Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 228: Safety sign W072: Loss of tractor-implement control
ISO 7010:2011/CD Amd 229
Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 229: Safety sign W073: Severing of fingers by fan blade
ISO 7010:2011/CD Amd 230
Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 230: Safety sign W074: Severing of fingers by impeller blade
ISO 7010:2011/CD Amd 231
Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 231: Safety sign W075: Severing of fingers by mower blade
ISO Update, Supplement to ISO Focus -- June 2016 3
ISO 7010:2011/CD Amd 232
Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 232: Safety sign W076: Severing of fingers or hand by sharp object
ISO 7010:2011/CD Amd 233
Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 233: Safety sign W077: Severing of leg by saw blade
ISO 7010:2011/CD Amd 234
Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 234: Safety sign W078: Severing of foot by mover blade
ISO 7010:2011/CD Amd 235
Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 235: Safety sign W079: Severing of toes or foot by sharp object
ISO 7010:2011/CD Amd 236
Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 236: Safety sign W080: Thrown or flying objects, exposure of face
ISO 7010:2011/CD Amd 237
Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 237: Safety sign W081: Thrown or flying objects, exposure of whole body
ISO 7010:2011/CD Amd 238
Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 238: Safety sign W082: Ballasted tire
TC 147 Water quality
ISO/CD 7027-2 Water quality — Determination of turbidity — Part 2: Semi-quantitative methods
ISO/CD 16266-2
Water quality — Detection and enumeration of Pseudomonas aeruginosa — Part 2: Most probable number method
TC 150 Implants for surgery
ISO/CD 14117 Active implantable medical devices — Electro-magnetic compatibility — EMC test protocols for implantable cardiac pacemakers, implant-able cardioverter defibrillators and cardiac resynchronization devices
ISO/CD 14708-2
Implants for surgery — Active implantable medical devices — Part 2: Cardiac pacemakers
ISO/CD 14708-6
Implants for surgery — Active implantable medical devices — Part 6: Particular require-ments for active implantable medical devices intended to treat tachyarrhythmia (including implantable defibrillators)
TC 165 Timber structures
ISO/DTR 19623
Timber structures — Glued laminated timber — Assigned of glued laminated timber character-istic values from laminate propoerties
TC 171 Document management applications
ISO/CD 18759 Document management — Trusted WORM functional and technical requirements
TC 172 Optics and photonics
ISO/CD 11981 Ophthalmic optics — Contact lenses and contact lens care products — Determination of physical compatibility of contact lens care products with contact lenses
TC 188 Small craft
ISO/CD 12215-5
Small craft — Hull construction and scantlings — Part 5: Design pressures for monohulls, design stresses, scantlings determination
TC 194 Biological and clinical evaluation of medical devices
ISO/DTR 10993-22
Biological evaluation of medical devices — Part 22: Guidance on nanomaterials
TC 198 Sterilization of health care products
ISO/CD 13408-2
Aseptic processing of health care products — Part 2: Filtration
TC 206 Fine ceramics
ISO/CD 19604 Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of ceramic composites at elevated temperature in air atmospheric pressure — Testing method for creep behavior under tensile loading
ISO/CD 19628 Fine Ceramics (advanced ceramics, advanced technical ceramics) - Thermophysical proper-ties of ceramic composites - Determination of specific heat capacity
ISO/CD 20323 Fine ceramics (advanced ceramics, advanced technical ceramics) — Mecanical properties of ceramic composites at ambient temperature in air atmospheric pressure — Determination of tensile properties of tubes
ISO/CD 26602 Fine ceramics (advanced ceramics, advanced technical ceramics) — Silicon nitride materials for rolling bearing elements
TC 211 Geographic information/Geomatics
ISO/CD 19123-2
Geographic information — Schema for cover-age geometry and functions — Part 2: Cover-age implementation schema
ISO 19157:2013/CD Amd 1
Geographic information — Data quality — Amendment 1
TC 213 Dimensional and geometrical product specifications and verification
ISO/CD 21204 Geometrical product specifications (GPS) — Edges of defined shape
JTC 1 Information technology
ISO/IEC CD 24787
Information technology — Identification cards — On-card biometric comparison
ISO/IEC CD 27007
Information technology — Security techniques — Guidelines for information security manage-ment systems auditing
ISO/IEC PDTR 27008
Information technology — Security techniques — Guidelines for the assessment of informa-tion security controls
ISO/IEC CD 27019
Information technology — Security techniques — Information security management guidelines based on ISO/IEC 27002 for process control systems specific to the energy utility industry
ISO/IEC CD 27021
Information technology — Security techniques — Competence requirements for information security management systems professionals
ISO/IEC PDTS 29167-15
Information technology — Automatic identi-fication and data capture techniques — Part 15: Crypto suite XOR security services for air interface communications
DIS circulated
Period from 01 May to 31 May 2016
These documents have obtained substantial support within the ap-propriate ISO technical committee.
They have been submitted to the ISO member bodies for voting by the date shown.
* Available in English only
4 ISO Update, Supplement to ISO Focus -- June 2016
Vote terminates
IIW International Institute of Welding
ISO/DIS 18785-1
* Friction stir spot welding — Alu-minium — Part 1: Terminology
2016-08-30
ISO/DIS 18785-2
* Friction stir spot welding — Aluminium — Part 2: Design of weld joints
2016-08-30
ISO/DIS 18785-3
* Friction stir spot welding — Alu-minium — Part 3: Qualification of welding operators
2016-08-30
ISO/DIS 18785-4
* Friction stir spot welding — Aluminium — Part 4: Specifica-tion and qualification of welding procedures
2016-08-30
ISO/DIS 18785-5
* Friction stir spot welding — Aluminium — Part 5: Quality and inspection requirements
2016-08-30
COPOLCO Committee on consumer policy
ISO/IEC DGuide 46
* Comparative testing of consum-er products and related services — General principles
2016-09-16
(Revision of ISO/IEC Guide 46:1985)
PC 273 Customer contact centres
ISO/DIS 18295-1
* Customer contact centres — Part 1: Requirements for cus-tomer contact centres
2016-09-12
ISO/DIS 18295-2
* Customer contact centres — Part 2: Requirements for using the services of customer contact centres
2016-09-12
TC 6 Paper, board and pulps
ISO/DIS 9416 * Paper — Determination of light scattering and absorption coef-ficients (using Kubelka-Munk theory)
2016-08-09
(Revision of ISO 9416:2009)
TC 20 Aircraft and space vehicles
ISO/DIS 10537 * Space data and information transfer systems — Encapsula-tion service
(Revision of ISO 10537:2010, ISO 10537:2010/Amd 1:2015)
TC 22 Road vehicles
ISO/DIS 6626-2
* Internal combustion engines — Piston rings — Part 2: Coil-spring-loaded oil control rings of narrow width made of cast iron
2016-08-30
(Revision of ISO 6626-2:2013)
ISO/DIS 8535-1
* Diesel engines — Steel tubes for high-pressure fuel injection pipes — Part 1: Requirements for seamless cold-drawn single-wall tubes
2016-08-16
(Revision of ISO 8535-1:2011)
TC 24 Particle characterization including sieving
ISO/DIS 21501-4
* Determination of particle size distribution — Single particle light interaction methods — Part 4: Light scattering airborne parti-cle counter for clean spaces
2016-08-17
(Revision of ISO 21501-4:2007)
TC 30 Measurement of fluid flow in closed conduits
ISO/DIS 20456 * Measurement of fluid flow in closed conduits — Guidance for the use of electromagnetic flow-meters for conductive liquids
2016-08-04
(Revision of ISO 13359:1998, ISO 6817:1992, ISO 9104:1991)
TC 34 Food products
ISO/DIS 19660 * Cream — Determination of fat content — Acido-butyrometric method
2016-08-16
ISO/DIS 19662 * Milk — Determination of fat content — Acido-butyrometric (Gerber method)
2016-08-16
ISO/DIS 13722 * Microbiology of the food chain — Enumeration of Brochothrix spp. — Colony-count technique
2016-08-18
(Revision of ISO 13722:1996)
TC 35 Paints and varnishes
ISO/DIS 12944-4
* Paints and varnishes — Corro-sion protection of steel struc-tures by protective paint systems — Part 4: Types of surface and surface preparation
2016-08-19
(Revision of ISO 12944-4:1998)
ISO/DIS 12944-5
* Paints and varnishes — Corro-sion protection of steelstructures by protective paint systems — Part 5: Protective paint systems
2016-08-19
(Revision of ISO 12944-5:2007)
ISO/DIS 12944-8
* Paints and varnishes — Corro-sion protection of steel struc-tures by protective paint systems — Part 8: Development of specifications for new work and maintenance
2016-08-19
(Revision of ISO 12944-8:1998)
ISO/DIS 12944-9
* Paints and varnishes — Corro-sion protection of steel struc-tures by protective paint systems — Part 9: Protective paint systems and laboratory perfor-mance test methods for offshore and related structures
2016-08-19
(Revision of ISO 20340:2009)
TC 45 Rubber and rubber products
ISO/DIS 11237 * Rubber hoses and hose as-semblies — Compact wire-braid-reinforced hydraulic types for oil-based or water-based fluids — Specification
2016-08-23
(Revision of ISO 11237:2010)
ISO/DIS 19984-1
* Rubber and rubber products — Determination of biobased con-tent — Part 1: General principles and calculation methods using formulation
ISO Update, Supplement to ISO Focus -- June 2016 5
ISO/DIS 19984-2
* Rubber and rubber products — Determination of biobased content — Part 2: Biobased carbon content
ISO/DIS 19984-3
* Rubber and rubber products — Determination of biobased content — Part 3: Biobased mass content
ISO/DIS 20851 * Synthetic rubber latex — Exami-nation for micro-organisms
2016-08-18
ISO/DIS 2321 * Rubber threads — Methods of test
2016-08-30
(Revision of ISO 2321:2006)
TC 61 Plastics
ISO/DIS 16620-5
* Plastics — Biobased content — Part 5: Declaration of biobased carbon content, biobased synthetic polymer content and biobased mass content
2016-08-09
ISO/DIS 19929 * Plastics — Determination of average molecular mass and mixture ratio of poly (ethylene glycol) and its derivatives by MALDI-TOF-MS
2016-08-09
ISO/DIS 19935-1
* Plastics — Temperature modu-lated DSC — Part 1: General principles
2016-08-09
TC 67 Materials, equipment and offshore structures for pe-troleum, petrochemical and natural gas industries
ISO/DIS 17781.2
Petroleum, petrochemical and natural gas industries — Test methods for quality control of microstructure of ferritic/ austen-itic (duplex) stainless steels
2016-07-12
TC 68 Financial services
ISO/DIS 12812-1.2
* Core banking — Mobile financial services — Part 1: General framework
2016-07-13
TC 96 Cranes
ISO/DIS 8566-5
* Cranes — Cabins and control stations — Part 5: Overhead travelling and portal bridge cranes
2016-08-11
(Revision of ISO 8566-5:1992)
TC 105 Steel wire ropes
ISO/DIS 2408 * Steel wire ropes — Minimum requirements
2016-08-16
(Revision of ISO 2408:2004)
ISO/DIS 3108 * Steel wire ropes — Test method — Determination of measured breaking force
2016-08-16
(Revision of ISO 3108:1974)
TC 106 Dentistry
ISO/DIS 9917-2
* Dentistry — Water-based ce-ments — Part 2: Resin-modified cements
2016-08-19
(Revision of ISO 9917-2:2010)
ISO/DIS 28319 * Dentistry — Laser welding
2016-08-05
(Revision of ISO 28319:2010)
ISO/DIS 19490 * Dentistry — Sinus membrane elevator
2016-08-30
ISO/DIS 11609 * Dentistry — Dentifrices — Re-quirements, test methods and marking
(Revision of ISO 11609:2010)
TC 107 Metallic and other inorgan-ic coatings
ISO/DIS 20267 * Thermal spraying — Determina-tion of interfacial toughness of ceramic coatings by indentation
2016-08-16
TC 123 Plain bearings
ISO/DIS 6279 * Plain bearings — Aluminium al-loys for solid bearings
(Revision of ISO 6279:2006)
ISO/DIS 10129 * Plain bearings — Testing of bearing metals — Resistance to corrosion by lubricants under static conditions
(Revision of ISO 10129:2006)
TC 126 Tobacco and tobacco products
ISO/DIS 13276 * Tobacco and tobacco products — Determination of nicotine purity — Gravimetric method using tungstosilicic acid
2016-08-23
(Revision of ISO 13276:1997)
TC 130 Graphic technology
ISO/DIS 19593-1
* Graphic technology — Use of PDF to associate processing steps and content data — Part 1: Processing steps 2016
2016-08-18
TC 131 Fluid power systems
ISO/DIS 6301-1
* Pneumatic fluid power — Com-pressed-air lubricators — Part 1: Main characteristics to be in-cluded in supplier's literature and product-marking requirements
2016-08-04
(Revision of ISO 6301-1:2009)
ISO/DIS 23309 * Hydraulic fluid power systems — Assembled systems — Methods of cleaning lines by flushing
2016-08-09
(Revision of ISO 23309:2007)
TC 138 Plastics pipes, fittings and valves for the transport of fluids
ISO/DIS 19469-1
* Plastic piping systems for non pressure underground drainage — Single wall corrugated piping systems of polyethylene (PE), polypropylene (PP) and unplasti-cized poly(vinyl chloride) (PVC-U) — Part 1: General requirements and performance characteristics
2016-08-03
6 ISO Update, Supplement to ISO Focus -- June 2016
ISO/DIS 19469-3
* Plastic piping systems for non pressure underground drainage - Single wall corrugated piping systems of polyethylene (PE), polypropylene (PP) and unplasti-cized poly(vinyl chloride) (PVC-U) — Part 3: Pipes and fittings for deep burial installations
2016-08-03
TC 145 Graphical symbols
ISO 7001:2007/DAmd 96
* Graphical symbols — Public information symbols — Amend-ment 96: PI TF 042: Meeting point
2016-08-18
ISO 7001:2007/DAmd 97
* Graphical symbols — Public information symbols — Amend-ment 97: PI TF 043: Tour group meeting point
2016-08-18
ISO 7001:2007/DAmd 98
* Graphical symbols — Public information symbols — Amend-ment 98: Symbol PI PF 074: Automatic sensor faucet
2016-08-18
ISO 7001:2007/DAmd 99
* Graphical symbols — Public information symbols — Amend-ment 99: PI PF 075: Hand dryer
2016-08-18
ISO 7001:2007/DAmd 100
* Graphical symbols — Public information symbols — Amend-ment 100: PI PF 076: Toilet paper
2016-08-18
TC 147 Water quality
ISO/DIS 20595 * Water quality — Determina-tion of selected easily volatile organic compounds in water — Method using gas chroma-tography and mass spectrometry by static headspace technique (HS-GC-MS)
2016-08-26
TC 158 Analysis of gases
ISO/DIS 16664 * Gas analysis — Handling of cali-bration gases and gas mixtures — Guidelines
2016-08-26
(Revision of ISO 16664:2004)
TC 159 Ergonomics
ISO/DIS 9241-125
* Ergonomics of human-system interaction — Part 125: Guid-ance on visual presentation of information
2016-08-12
(Revision of ISO 9241-12:1998)
TC 164 Mechanical testing of metals
ISO/DIS 15653 * Metallic materials — Method of test for the determination of quasistatic fracture toughness of welds
2016-08-12
(Revision of ISO 15653:2010)
TC 165 Timber structures
ISO/DIS 12122-6
* Timber structures — Determina-tion of characteristic values — Part 6: Large components and assemblies
2016-08-03
TC 172 Optics and photonics
ISO/DIS 11554 * Optics and photonics — Lasers and laser-related equipment — Test methods for laser beam power, energy and temporal characteristics
2016-08-19
(Revision of ISO 11554:2006)
TC 182 Geotechnics
ISO/DIS 18674-3
* Geotechnical investigation and testing — Geotechnical monitoring by field instrumenta-tion — Part 3: Measurement of displacements across a line: inclinometers
2016-08-26
TC 184 Automation systems and integration
ISO/DIS 15531-44
* Industrial automation systems and integration — Industrial manufacturing management data — Part 44: Information modelling for shop floor data acquisition
2016-08-30
(Revision of ISO 15531-44:2010)
TC 190 Soil quality
ISO/DIS 11272 * Soil quality — Determination of dry bulk density
2016-08-12
(Revision of ISO 11272:1998)
TC 198 Sterilization of health care products
ISO/DIS 15883-4
* Washer-disinfectors — Part 4: Requirements and tests for washer-disinfectors employing chemical disinfection for thermo-labile endoscopes
2016-08-05
(Revision of ISO 15883-4:2008)
TC 199 Safety of machinery
ISO/DIS 14118 * Safety of machinery — Preven-tion of unexpected start-up
2016-08-25
(Revision of ISO 14118:2000)
TC 206 Fine ceramics
ISO/DIS 19613 * Fine ceramics (advanced ceram-ics, advanced technical ceram-ics) — Measurement of viscosity of ceramic slurry by use of a rotational viscometer
2016-07-26
TC 211 Geographic information/Geomatics
ISO/DIS 19155-2
* Geographic information — Place Identifier (PI) architecture — Part 2: Place Identifier (PI) linking
2016-08-23
TC 220 Cryogenic vessels
ISO/DIS 20421-2.2
* Cryogenic vessels — Large transportable vacuum-insulated vessels — Part 2: Operational requirements
2016-07-05
(Revision of ISO 20421-2:2005)
ISO/DIS 21028-2.2
* Cryogenic vessels — Toughness requirements for materials at cryogenic temperature — Part 2: Temperatures between -80 degrees C and -20 degrees C
2016-07-04
(Revision of ISO 21028-2:2004)
ISO/DIS 23208 * Cryogenic vessels — Cleanliness for cryogenic service
2016-08-16
(Revision of ISO 23208:2005)
TC 244 Industrial furnaces and associated processing equipment
ISO Update, Supplement to ISO Focus -- June 2016 7
ISO/DIS 13578 * Industrial furnaces and as-sociated processing equip-ment — Safety requirements for machinery and equipment for production of steel by electric arc furnaces
2016-08-12
TC 249 Traditional chinese medicine
ISO/DIS 18662-1
* Traditional Chinese medicine — Vocabulary — Part 1: Chinese Materia Medica
2016-08-04
ISO/DIS 19611 * Traditional Chinese medicine — Air exhaust cupping apparatus for medical use
2016-08-11
TC 269 Railway applications
ISO/DIS 19659-1
* Railway applications — Heating, ventilation and air conditioning systems for rolling stock — Part 1: Terms and definitions
2016-08-09
CASCO Committee on conformity assessment
ISO/IEC DIS 17021-2
* Conformity assessment — Re-quirements for bodies provid-ing audit and certification of management systems — Part 2: Competence requirements for auditing and certification of envi-ronmental management systems
2016-08-06
(Revision of ISO/IEC TS 17021-2:2012)
JTC 1 Information technology
ISO/IEC DIS 20741
* Systems and Software Engineer-ing — Guideline for the evalu-ation and selection of software engineering tools
2016-08-23
ISO/IEC DIS 7812-1
* Identification cards — Iden-tification of issuers — Part 1: Numbering system
2016-08-30
(Revision of ISO/IEC 7812-1:2015)
ISO/IEC DIS 7812-2
* Identification cards — Identifica-tion of issuers — Part 2: Applica-tion and registration procedures
2016-08-30
(Revision of ISO/IEC 7812-2:2015)
ISO/IEC 10373-6/DAmd 4
* Identification cards — Test meth-ods — Part 6: Proximity cards — Amendment 4: Conformance test plan
2016-08-25
ISO/IEC 14496-3:2009/DAmd 6
* Information technology — Cod-ing of audio-visual objects — Part 3: Audio — Amendment 6: Profiles, levels and downmix-ing method for 22.2 channel programs
2016-08-23
ISO/IEC DIS 23000-17
* Information technology — Mul-timedia application format (MPEG-A) — Part 17: Multiple sensorial media application format
2016-08-23
ISO/IEC DIS 24707
* Information technology — Com-mon Logic (CL) — A framework for a family of logic-based languages
2016-08-17
(Revision of ISO/IEC 24707:2007)
ISO/IEC 19794-6:2011/DAmd 2
* Information technology — Bio-metric data interchange formats — Part 6: Iris image data — Amendment 2: XML Encoding and clarification of defects
2016-08-04
FDIS circulated
Period from 01 May to 31 May 2016
These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the date shown
* Available in English only
Vote terminates
TC 6 Paper, board and pulps
ISO/FDIS 2470-1
* Paper, board and pulps — Measurement of diffuse blue reflectance factor — Part 1: Indoor daylight conditions (ISO brightness)
2016-07-21
(Revision of ISO 2470-1:2009)
ISO/FDIS 9197 * Paper, board and pulps — Determination of water-soluble chlorides
2016-07-11
(Revision of ISO 9197:2006)
ISO/FDIS 11476
* Paper and board — Determi-nation of CIE whiteness, C/2° (indoor illumination conditions)
2016-07-11
(Revision of ISO 11476:2010)
TC 17 Steel
ISO/FDIS 14590
* Cold-reduced steel sheet of high tensile strength and low yield point with improved formability
2016-06-28
(Revision of ISO 14590:2005)
TC 22 Road vehicles
ISO/FDIS 12619-4
* Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 4: Check valve
2016-07-17
ISO/FDIS 12619-5
* Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 5: Manual cylinder valve
2016-07-17
ISO/FDIS 14469
* Road vehicles — Compressed natural gas (CNG) refuelling connector
2016-07-21
(Revision of ISO 14469-1:2004, ISO 14469-2:2007, ISO 14469-3:2006)
TC 29 Small tools
ISO/FDIS 4230 * Hand- and machine-operated circular screwing dies for taper pipe threads — R series
2016-07-19
(Revision of ISO 4230:1987)
8 ISO Update, Supplement to ISO Focus -- June 2016
ISO/FDIS 4231 * Hand- and machine-operated circular screwing dies for parallel pipe threads — G series
2016-07-19
(Revision of ISO 4231:1987)
ISO/FDIS 10898
* Spot drills
2016-07-16
(Revision of ISO 10898:1992)
TC 31 Tyres, rims and valves
ISO/FDIS 18106
* Passenger car, commercial vehicle, truck and bus tyres — Methods for measuring snow grip performance — Loaded new tyres
2016-07-04
TC 38 Textiles
ISO/FDIS 18264
* Textile slings — Lifting slings for general purpose lifting opera-tions made from fibre ropes — High Modulus PolyEthylene (HMPE)
2016-07-16
ISO/FDIS 1144 * Textiles — Universal system for designating linear density (Tex System)
2016-07-24
(Revision of ISO 1144:1973)
TC 43 Acoustics
ISO/FDIS 10140-1
* Acoustics — Laboratory meas-urement of sound insulation of building elements — Part 1: Application rules for specific products
2016-07-13
(Revision of ISO 10140-1:2010, ISO 10140-1:2010/Amd 1:2012, ISO 10140-1:2010/Amd 2:2014)
TC 45 Rubber and rubber products
ISO/FDIS 6235 * Rubber, raw — Determination of block polystyrene content — Ozonolysis method
2016-07-17
(Revision of ISO 6235:1995)
TC 61 Plastics
ISO/FDIS 11357-1
* Plastics — Differential scanning calorimetry (DSC) — Part 1: General principles
2016-08-05
(Revision of ISO 11357-1:2009)
ISO/FDIS 18830
* Plastics — Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sandy sediment interface — Method by measur-ing the oxygen demand in closed respirometer
2016-07-09
ISO/FDIS 19679
* Plastics — Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface — Method by analysis of evolved carbon dioxide
2016-07-09
TC 67 Materials, equipment and offshore structures for pe-troleum, petrochemical and natural gas industries
ISO/FDIS 16440
* Petroleum and natural gas indus-tries — Pipeline transportation systems — Design, construction and maintenance of steel cased pipelines
2016-07-06
ISO/FDIS 20088-1
* Determination of the resistance to cryogenic spillage of insula-tion materials — Part 1: Liquid phase
2016-07-04
TC 76 Transfusion, infusion and injection, and blood processing equipment for medical and pharmaceuti-cal use
ISO/FDIS 1135-3
* Transfusion equipment for medi-cal use — Part 3: Blood-taking sets for single use
2016-07-23
(Revision of ISO 1135-3:1986)
ISO/FDIS 8871-5
* Elastomeric parts for parenterals and for devices for pharmaceuti-cal use — Part 5: Functional requirements and testing
2016-07-06
(Revision of ISO 8871-5:2005)
TC 83 Sports and other rec-reational facilities and equipment
ISO/FDIS 20957-9
* Stationary training equipment — Part 9: Elliptical trainers, additional specific safety require-ments and test methods
2016-07-13
(Revision of ISO 20957-9:2005)
TC 85 Nuclear energy, nuclear technologies, and radio-logical protection
ISO/FDIS 16645
* Radiological protection — Medi-cal electron accelerators — Re-quirements and recommenda-tions for shielding design and evaluation
2016-07-17
TC 106 Dentistry
ISO/FDIS 3964 * Dentistry — Coupling dimen-sions for handpiece connectors
2016-07-06
(Revision of ISO 3964:1982)
ISO/FDIS 9173-1
* Dentistry — Extraction forceps — Part 1: General requirements
2016-07-19
(Revision of ISO 9173-1:2006)
ISO/FDIS 16409
* Dentistry — Oral hygiene products — Manual interdental brushes
2016-07-13
(Revision of ISO 16409:2006, ISO 16409:2006/Amd 1:2010)
ISO/FDIS 14801
* Dentistry — Implants — Dynamic fatigue test for endosseous dental implants
2016-07-27
(Revision of ISO 14801:2007)
TC 121 Anaesthetic and respiratory equipment
ISO/FDIS 5366 * Anaesthetic and respiratory equipment — Tracheostomy tubes and connectors
2016-07-19
(Revision of ISO/DIS 5366-1, ISO/DIS 5366-3)
ISO/FDIS 18190
* Anaesthetic and respiratory equipment — General require-ments for airways and related equipment
2016-07-14
TC 131 Fluid power systems
ISO Update, Supplement to ISO Focus -- June 2016 9
ISO/FDIS 1219-3
* Fluid power systems and com-ponents — Graphical symbols and circuit diagrams — Part 3: Symbol modules and connected symbols in circuit diagrams
2016-07-18
ISO/FDIS 11171
* Hydraulic fluid power — Cali-bration of automatic particle counters for liquids
2016-07-04
(Revision of ISO 11171:2010)
TC 138 Plastics pipes, fittings and valves for the transport of fluids
ISO 17885:2015/FDAmd 1
* Plastics piping systems — Mechanical fittings for pressure piping systems — Specifications — Amendment 1
2016-07-04
TC 149 Cycles
ISO/FDIS 6699 * Cycles — Handlebar centre and stem dimensions
2016-07-01
(Revision of ISO 6699:1990)
TC 164 Mechanical testing of metals
ISO/FDIS 148-1
* Metallic materials — Charpy pendulum impact test — Part 1: Test method
2016-07-19
(Revision of ISO 148-1:2009)
ISO/FDIS 148-2
* Metallic materials — Charpy pendulum impact test — Part 2: Verification of testing machines
2016-07-19
(Revision of ISO 148-2:2008)
ISO/FDIS 148-3
* Metallic materials — Charpy pendulum impact test — Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
2016-07-19
(Revision of ISO 148-3:2008)
ISO/FDIS 27306
* Metallic materials — Method of constraint loss correction of CTOD fracture toughness for fracture assessment of steel components
2016-07-19
(Revision of ISO 27306:2009)
TC 172 Optics and photonics
ISO/FDIS 12870
* Ophthalmic optics — Spectacle frames — Requirements and test methods
2016-07-11
(Revision of ISO 12870:2012)
TC 182 Geotechnics
ISO/FDIS 22476-15
* Geotechnical investigation and testing — Field testing — Part 15: Measuring while drilling
2016-07-06
ISO/FDIS 22477-10
* Geotechnical investigation and testing — Testing of geotechni-cal structures — Part 10: Testing of piles: rapid load testing
2016-07-06
TC 201 Surface chemical analysis
ISO/FDIS 15471
* Surface chemical analysis — Au-ger electron spectroscopy — De-scription of selected instrumental performance parameters
2016-07-12
(Revision of ISO 15471:2004)
ISO/FDIS 17973
* Surface chemical analysis — Medium-resolution Auger electron spectrometers — Calibration of energy scales for elemental analysis
2016-07-12
(Revision of ISO 17973:2002)
TC 209 Cleanrooms and associat-ed controlled environments
ISO/FDIS 14644-14
* Cleanrooms and associated con-trolled environments — Part 14: Assessment of suitability for use of equipment by airborne particle concentration
2016-07-13
TC 213 Dimensional and geometri-cal product specifications and verification
ISO/FDIS 1 * Geometrical product speci-fications (GPS) — Standard reference temperature for the specification of geometrical and dimensional properties
2016-07-06
(Revision of ISO 1:2002)
ISO/FDIS 10360-12
* Geometrical product specifica-tions (GPS) — Acceptance and reverification tests for coordinate measuring systems (CMS) — Part 12: Articulated arm coor-dinate measurement machines (CMM)
2016-07-26
ISO/FDIS 18391
* Geometrical product specifi-cations (GPS) — Population specification
TC 220 Cryogenic vessels
ISO/FDIS 21028-1
* Cryogenic vessels — Toughness requirements for materials at cryogenic temperature — Part 1: Temperatures below -80 degrees C
2016-07-06
(Revision of ISO 21028-1:2004)
TC 224 Service activities relating to drinking water supply systems and wastewater systems - Quality criteria of the service and perfor-mance indicators
ISO/FDIS 24521
* Activities relating to drinking water and wastewater services — Guidelines for the manage-ment of basic onsite domestic wastewater services
2016-07-08
TC 238 Solid biofuels
ISO/FDIS 18846
* Solid biofuels — Determination of fines content in quantities of pellets
2016-07-06
ISO/FDIS 18847
* Solid biofuels — Determination of particle density of pellets and briquettes
2016-07-16
TC 249 Traditional chinese medicine
ISO/FDIS 18746
* Traditional Chinese medicine — Sterile intradermal acupuncture needles for single use
2016-07-01
TC 260 Human resource management
10 ISO Update, Supplement to ISO Focus -- June 2016
ISO/FDIS 30405
* Human resource management — Guidelines on recruitment
2016-07-07
ISO/FDIS 30408
* Human resource manage-ment — Guidelines on human governance
2016-07-07
TC 266 Biomimetics
ISO/FDIS 18457
* Biomimetics — Biomimetic materials, structures and components
2016-07-01
TC 299 Robotics
ISO/FDIS 18646-1
* Robots and robotic devices — Performance criteria and related test methods for service robots — Part 1: Locomotion for wheeled robots
2016-07-22
JTC 1 Information technology
ISO/IEC FDIS 11770-6
Information technology — Secu-rity techniques — Key manage-ment — Part 6: Key derivation
2016-07-19
ISO/IEC FDIS 27011
Information technology — Se-curity techniques — Code of practice for Information secu-rity controls based on ISO/IEC 27002 for telecommunications organizations
2016-07-13
(Revision of ISO/IEC 27011:2008)
ISO/IEC 19794-14:2013/FDAmd 1
* Information technology — Bio-metric data interchange formats — Part 14: DNA data — Amend-ment 1: Conformance testing and clarification of defects
2016-07-06
Standards published
New International Standards published between 01 May and 31 May 2016
* Available in English only
** French version of standard previously published in English only
Price
group
REMCO Committee on reference materials
ISO/TR 16476:2016
* Reference materials — Establishing and expressing metrological trace-ability of quantity values assigned to reference materials
D
TC 6 Paper, board and pulps
ISO 11093-4:2016
Paper and board — Testing of cores — Part 4: Measurement of dimensions
B
ISO 16260:2016
Paper and board — Determination of internal bond strength
C
TC 17 Steel
ISO 6931-1:2016
* Stainless steels for springs — Part 1: Wire
D
TC 20 Aircraft and space vehicles
ISO 7257:2016 * Aircraft — Hydraulic tubing joints and fittings — Rotary flexure test
B
TC 21 Equipment for fire protection and fire fighting
ISO 7076-6:2016
* Fire protection — Foam fire extinguish-ing systems — Part 6: Vehicle mounted compressed air foam systems
D
TC 22 Road vehicles
ISO 12619-2:2014/Amd 1:2016
* Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blend fuel system components — Part 2: Performance and general test methods — Amendment 1
XZ
TC 34 Food products
ISO 16634-2:2016
Food products — Determination of the total nitrogen content by combustion according to the Dumas principle and calculation of the crude protein content — Part 2: Cereals, pulses and milled cereal products
D
ISO 12966-3:2016
Animal and vegetable fats and oils — Gas chromatography of fatty acid methyl esters — Part 3: Preparation of methyl esters using trimethylsulfonium hydroxide (TMSH)
A
ISO 21033:2016
Animal and vegetable fats and oils — Determination of trace elements by inductively coupled plasma optical emission spectroscopy (ICP-OES)
C
TC 35 Paints and varnishes
ISO 4628-10:2016
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appear-ance — Part 10: Assessment of degree of filiform corrosion
B
TC 38 Textiles
ISO 105-D02:2016
Textiles — Tests for colour fastness — Part D02: Colour fastness to rubbing: Organic solvents
A
ISO 105-G01:2016
* Textiles — Tests for colour fastness — Part G01: Colour fastness to nitrogen oxides
B
ISO 105-G04:2016
* Textiles — Tests for colour fastness — Part G04: Colour fastness to nitrogen oxides in the atmosphere at high humidities
B
ISO 105-X12:2016
Textiles — Tests for colour fastness — Part X12: Colour fastness to rubbing
A
ISO 105-X16:2016
Textiles — Tests for colour fastness — Part X16: Colour fastness to rubbing — Small areas
A
ISO Update, Supplement to ISO Focus -- June 2016 11
TC 39 Machine tools
ISO 2407:1997/Amd 1:2016
Test conditions for internal cylindrical grinding machines with horizontal spin-dle — Testing of accuracy — Amend-ment 1
XZ
TC 42 Photography
ISO 20087:2016
* Photography — Digital still cameras — Battery life measurement
B
TC 43 Acoustics
ISO 16254:2016
Acoustics — Measurement of sound emitted by road vehicles of category M and N at standstill and low speed operation — Engineering method
F
TC 44 Welding and allied processes
ISO 17777:2016
Welding consumables — Covered electrodes for manual metal arc welding of copper and copper alloys — Classification
B
ISO 19288:2016
Welding consumables — Solid wire electrodes, solid wires and rods for fusion welding of magnesium and magnesium alloys — Classification
A
ISO 10656:2016
* Resistance welding equipment — Transformers — Integrated transform-ers for welding guns
B
TC 45 Rubber and rubber products
ISO 813:2016 Rubber, vulcanized or thermoplastic — Determination of adhesion to a rigid substrate — 90 degree peel method
B
ISO 14558:2016
Rubber — Determination of residual unsaturation of hydrogenated nitrile butadiene rubber (HNBR) by infrared spectroscopy
B
TC 58 Gas cylinders
ISO 16148:2016
Gas cylinders — Refillable seamless steel gas cylinders and tubes — Acoustic emission examination (AT) and follow-up ultrasonic examination (UT) for periodic inspection and testing
E
TC 67 Materials, equipment and off-shore structures for petroleum, petrochemical and natural gas industries
ISO 24817:2015
Petroleum, petrochemical and natural gas industries — Composite repairs for pipework — Qualification and de-sign, installation, testing and inspection
H
TC 70 Internal combustion engines
ISO 8528-8:2016
Reciprocating internal combustion engine driven alternating current gener-ating sets — Part 8: Requirements and tests for low-power generating sets
B
ISO 8528-13:2016
Reciprocating internal combustion engine driven alternating current gen-erating sets — Part 13: Safety
F
TC 71 Concrete, reinforced concrete and pre-stressed concrete
ISO 17785-1:2016
* Testing methods for pervious concrete — Part 1: Infiltration rate
A
TC 72 Textile machinery and accessories
ISO 11111-1:2016
Textile machinery — Safety re-quirements — Part 1: Common requirements
G
ISO 11111-2:2005/Amd 2:2016
Textile machinery — Safety require-ments — Part 2: Spinning preparatory and spinning machines — Amendment 2
XZ
ISO 11111-3:2005/Amd 2:2016
Textile machinery — Safety require-ments — Part 3: Nonwoven machinery — Amendment 2
XZ
ISO 11111-4:2005/Amd 2:2016
Textile machinery — Safety require-ments — Part 4: Yarn processing, cordage and rope manufacturing machinery — Amendment 2
XZ
ISO 11111-5:2005/Amd 2:2016
Textile machinery — Safety require-ments — Part 5: Preparatory machin-ery to weaving and knitting — Amend-ment 2
XZ
ISO 11111-6:2005/Amd 2:2016
Textile machinery — Safety require-ments — Part 6: Fabric manufacturing machinery — Amendment 2
XZ
ISO 11111-7:2005/Amd 2:2016
Textile machinery — Safety require-ments — Part 7: Dyeing and finishing machinery — Amendment 2
XZ
TC 92 Fire safety
ISO 3008-3:2016
* Fire resistance tests — Part 3: Door and shutter assemblies horizontally oriented
C
ISO/TS 29761:2015
Fire safety engineering — Selection of design occupant behavioural scenarios
D
TC 94 Personal safety -- Protective clothing and equipment
ISO 16900-10:2015
Respiratory protective devices — Methods of test and test equipment — Part 10: Resistance to ignition, flame, radiant heat and heat
D
ISO 16900-12:2016
Respiratory protective devices — Methods of test and test equipment — Part 12: Determination of volume-averaged work of breathing and peak respiratory pressures
C
ISO/TS 16973:2016
Respiratory protective devices — Classification for respiratory protec-tive device (RPD), excluding RPD for underwater application
E
ISO/TS 16975-2:2016
* Respiratory protective devices — Se-lection, use and maintenance — Part 2: Condensed guidance to establishing and implementing a respiratory protec-tive device programme
C
ISO/TS 16976-1:2015
Respiratory protective devices — Hu-man factors — Part 1: Metabolic rates and respiratory flow rates
D
TC 106 Dentistry
ISO/TR 18130:2016
* Dentistry — Screw loosening test using cyclic torsional loading for implant body/implant abutment connection of endosseous dental implants
B
TC 108 Mechanical vibration, shock and condition monitoring
12 ISO Update, Supplement to ISO Focus -- June 2016
ISO 16063-17:2016
* Methods for the calibration of vibration and shock transducers — Part 17: Primary calibration by centrifuge
B
TC 110 Industrial trucks
ISO 18479-2:2016
* Rough-terrain trucks — Non-integrated personnel work platforms — Part 2: User requirements
C
TC 119 Powder metallurgy
ISO 4499-3:2016
Hardmetals — Metallographic deter-mination of microstructure — Part 3: Measurement of microstructural fea-tures in Ti (C, N) and WC/cubic carbide based hardmetals
D
TC 121 Anaesthetic and respiratory equipment
IEC 80601-2-35:2009/Amd 1:2016
* Medical electrical equipment — Part 2-35: Particular requirements for the basic safety and essential performance of heating devices using blankets, pads or mattresses and intended for heating in medical use — Amendment 1
XZ
TC 127 Earth-moving machinery
ISO 13031:2016
* Earth-moving machinery — Quick couplers — Safety
B
TC 130 Graphic technology
ISO 12641-1:2016
* Graphic technology — Prepress digital data exchange — Colour targets for input scanner calibration — Part 1: Colour targets for input scanner calibration
D
ISO/TS 15311-1:2016
* Graphic technology — Requirements for printed matter for commercial and industrial production — Part 1: Measurement methods and reporting schema
C
ISO 17972-2:2016
* Graphic technology — Colour data exchange format (CxF/X) — Part 2: Scanner target data (CxF/X-2)
B
ISO 19445:2016
* Graphic technology — Metadata for graphic arts workflow — XMP meta-data for image and document proofing
B
TC 131 Fluid power systems
ISO 3601-5:2015
* Fluid power systems — O-rings — Part 5: Specification of elastomeric materi-als for industrial applications
C
TC 133 Clothing sizing systems - size designation, size measurement methods and digital fittings
ISO 18163:2016
Clothing — Digital fittings — Vo-cabulary and terminology used for the virtual garment
C
ISO 18831:2016
Clothing — Digital fittings — Attributes of virtual garments
C
TC 135 Non-destructive testing
ISO 18081:2016
Non-destructive testing — Acoustic emission testing (AT) — Leak detection by means of acoustic emission
E
TC 138 Plastics pipes, fittings and valves for the transport of fluids
ISO 18489:2015
* Polyethylene (PE) materials for piping systems — Determination of resistance to slow crack growth under cyclic load-ing — Cracked Round Bar test method
B
TC 145 Graphical symbols
ISO 7001:2007/Amd 3:2016
* Graphical symbols — Public informa-tion symbols — Amendment 3
E
TC 164 Mechanical testing of metals
ISO 9649:2016 * Metallic materials — Wire — Reverse torsion test
A
TC 168 Prosthetics and orthotics
ISO 10328:2016
Prosthetics — Structural testing of lower-limb prostheses — Requirements and test methods
H
ISO 22675:2016
Prosthetics — Testing of ankle-foot devices and foot units — Requirements and test methods
H
TC 172 Optics and photonics
ISO 9022-9:2016
* Optics and photonics — Environmental test methods — Part 9: Solar radiation and weathering
B
ISO 14133-1:2016
* Optics and photonics — Specifications for binoculars, monoculars and spot-ting scopes — Part 1: General purpose instruments
A
ISO 14133-2:2016
* Optics and photonics — Specifications for binoculars, monoculars and spot-ting scopes — Part 2: High perfor-mance instruments
A
ISO 10685-2:2016
Ophthalmic optics — Spectacle frames and sunglasses electronic catalogue and identification — Part 2: Commer-cial information
C
ISO 18189:2016
* Ophthalmic optics — Contact lenses and contact lens care products — Cytotoxicity testing of contact lenses in combination with lens care solution to evaluate lens/solution interactions
B
TC 188 Small craft
ISO 14895:2016
Small craft — Liquid-fuelled galley stoves and heating appliances
B
TC 193 Natural gas
ISO/TR 14749:2016
* Natural gas — Online gas chromato-graph for upstream area
D
TC 197 Hydrogen technologies
ISO 17268:2012
Gaseous hydrogen land vehicle refuel-ling connection devices
E
TC 199 Safety of machinery
ISO 14122-1:2016
Safety of machinery — Permanent means of access to machinery — Part 1: Choice of fixed means and general requirements of access
B
ISO Update, Supplement to ISO Focus -- June 2016 13
ISO 14122-2:2016
Safety of machinery — Permanent means of access to machinery — Part 2: Working platforms and walkways
C
ISO 14122-3:2016
Safety of machinery — Permanent means of access to machinery — Part 3: Stairs, stepladders and guard-rails
D
ISO 14122-4:2016
Safety of machinery — Permanent means of access to machinery — Part 4: Fixed ladders
F
TC 201 Surface chemical analysis
ISO/TR 18394:2016
* Surface chemical analysis — Auger electron spectroscopy — Derivation of chemical information
D
TC 204 Intelligent transport systems
ISO 13184-2:2016
* Intelligent transport systems (ITS) — Guidance protocol via personal ITS station for advisory safety systems — Part 2: Road guidance protocol (RGP) requirements and specification
H
ISO/TS 17425:2016
* Intelligent transport systems — Co-operative systems — Data exchange specification for in-vehicle presentation of external road and traffic related data
H
ISO/TS 21219-1:2016
* Intelligent transport systems — Traffic and travel information (TTI) via trans-port protocol experts group, genera-tion 2 (TPEG2) — Part 1: Introduction, numbering and versions (TPEG2-INV)
B
ISO/TS 21219-10:2016
* Intelligent transport systems — Traffic and travel information (TTI) via trans-port protocol experts group, genera-tion 2 (TPEG2) — Part 10: Conditional access information (TPEG2-CAI)
B
ISO/TS 21219-14:2016
* Intelligent transport systems — Traffic and travel information (TTI) via trans-port protocol experts group, generation 2 (TPEG2) — Part 14: Parking informa-tion application (TPEG2-PKI)
F
ISO/TS 21219-15:2016
* Intelligent transport systems — Traffic and travel information (TTI) via trans-port protocol experts group, genera-tion 2 (TPEG2) — Part 15: Traffic event compact (TPEG2-TEC)
G
TC 213 Dimensional and geometrical product specifications and verification
ISO 17450-3:2016
Geometrical product specifications (GPS) — General concepts — Part 3: Toleranced features
D
TC 215 Health informatics
ISO/TS 19256:2016
* Health informatics — Requirements for medicinal product dictionary systems for health care
F
IEC/TR 80001-2-8:2016
* Application of risk management for IT-networks incorporating medical devices — Part 2-8: Application guid-ance — Guidance on standards for establishing the security capabilities identified in IEC 80001-2-2
F
TC 217 Cosmetics
ISO/TR 19838:2016
Microbiology — Cosmetics — Guide-lines for the application of ISO stand-ards on Cosmetic Microbiology
C
TC 220 Cryogenic vessels
ISO 21013-3:2016
Cryogenic vessels — Pressure-relief accessories for cryogenic ser-vice — Part 3: Sizing and capacity determination
E
TC 238 Solid biofuels
ISO 17827-2:2016
Solid biofuels — Determination of par-ticle size distribution for uncompressed fuels — Part 2: Vibrating screen method using sieves with aperture of 3,15 mm and below
B
TC 257 Evaluation of energy savings
ISO 17743:2016
* Energy savings — Definition of a methodological framework applicable to calculation and reporting on energy savings
C
TC 265 Carbon dioxide capture, trans-portation, and geological storage
ISO/TR 27912:2016
* Carbon dioxide capture — Carbon dioxide capture systems, technologies and processes
H
JTC 1 Information technology
ISO/IEC 14651:2016
Information technology — Interna-tional string ordering and comparison — Method for comparing character strings and description of the common template tailorable ordering
F
ISO/IEC/IEEE 8802-22:2015
* Information technology — Telecom-munications and information exchange between systems — Local and metropolitan area networks — Specific requirements — Part 22: Cognitive Wireless RAN Medium Access Control (MAC) and Physical Layer (PHY) Speci-fications: Policies and Procedures for Operation in the TV Bands
H
ISO/IEC TR 19759:2015
* Software Engineering — Guide to the software engineering body of knowl-edge (SWEBOK)
H
ISO/IEC/IEEE 24748-4:2016
* Systems and software engineering — Life cycle management — Part 4: Systems engineering planning
G
ISO/IEC 7816-15:2016
* Identification cards — Integrated circuit cards — Part 15: Cryptographic infor-mation application
H
ISO/IEC 14443-3:2016
* Identification cards — Contactless integrated circuit cards — Proxim-ity cards — Part 3: Initialization and anticollision
G
ISO/IEC 14443-4:2016
* Identification cards — Contactless integrated circuit cards — Proximity cards — Part 4: Transmission protocol
G
ISO/IEC 18041-4:2016
* Information technology — Computer graphics, image processing and envi-ronmental data representation — En-vironmental Data Coding Specification (EDCS) language bindings — Part 4: C
G
ISO/IEC 11770-3:2015/Cor 1:2016
* Information technology — Security techniques — Key management — Part 3: Mechanisms using asymmetric techniques — Technical Corrigendum 1
free
ISO/IEC 27033-6:2016
* Information technology — Security techniques — Network security — Part 6: Securing wireless IP network access
D
14 ISO Update, Supplement to ISO Focus -- June 2016
ISO/IEC 14496-5:2001/Amd 39:2016
* Information technology — Coding of audio-visual objects — Part 5: Refer-ence software — Amendment 39: Ref-erence software for the Multi-resolution Frame Compatible Stereo Coding with Depth Maps of AVC
XZ
ISO/IEC 23008-5:2015/Amd 2:2016
* Information technology — High ef-ficiency coding and media delivery in heterogeneous environments — Part 5: Reference software for high efficiency video coding — Amendment 2: Refer-ence Software for the Multiview Main Profile of HEVC
XZ
ISO/IEC 29167-19:2016
* Information technology — Automatic identification and data capture tech-niques — Part 19: Crypto suite RA-MON security services for air interface communications
G
ISO/IEC 13249-1:2016
* Information technology — Data-base languages — SQL multimedia and application packages — Part 1: Framework
C
ISO/IEC TR 29195:2015
* Traveller processes for biometric rec-ognition in automated border control systems
D
ISO/IEC 18384-1:2016
* Information technology — Reference Architecture for Service Oriented Archi-tecture (SOA RA) — Part 1: Terminol-ogy and concepts for SOA
G
ISO/IEC 20933:2016
* Information technology — Distributed Application Platforms and Services (DAPS) — Access Systems
C
Standards confirmed
The following International Standards are confimred for a five year period:
TC 4 Rolling bearings
ISO 281:2007 (reconfirmed)
TC 5 Ferrous metal pipes and metallic fittings
ISO 8180:2006 (reconfirmed)
ISO 10804:2010
TC 8 Ships and marine technology
ISO 6043:1985 (reconfirmed)
ISO 6044:1985 (reconfirmed)
ISO 8146:1985 (reconfirmed)
ISO 8147:1995 (reconfirmed)
ISO 8148:1985 (reconfirmed)
TC 10 Technical product documentation
IEC 82045-1:2001 (reconfirmed)
IEC 82045-2:2004
ISO 11005:2010
TC 22 Road vehicles
ISO 4082:1981 (reconfirmed)
ISO 4148:2004 (reconfirmed)
ISO 5898:1997 (reconfirmed)
ISO 6255:1997 (reconfirmed)
ISO 6797:1982 (reconfirmed)
ISO 7397-1:1993 (reconfirmed)
ISO 7397-2:1993 (reconfirmed)
ISO 7591:1982 (reconfirmed)
ISO 10604:1993 (reconfirmed)
ISO/PAS 16898:2012
ISO 6725:1981 (reconfirmed)
ISO 7398:1990 (reconfirmed)
ISO 7399:1990 (reconfirmed)
ISO 9565:1990 (reconfirmed)
ISO 9987:1990 (reconfirmed)
ISO 10355:2004 (reconfirmed)
ISO/TS 16951:2004
(reconfirmed)
TC 27 Solid mineral fuels
ISO 1928:2009
ISO 23873:2010
TC 28 Petroleum products and related prod-ucts of synthetic or biological origin
ISO 2977:1997 (reconfirmed)
ISO 8943:2007 (reconfirmed)
TC 34 Food products
ISO 23391:2006 (reconfirmed)
ISO 23392:2006 (reconfirmed)
ISO 23393:2006 (reconfirmed)
ISO 23394:2006 (reconfirmed)
ISO 4112:1990 (reconfirmed)
ISO 6322-2:2000 (reconfirmed)
ISO 6322-3:1989 (reconfirmed)
ISO 15793:2000 (reconfirmed)
ISO 3890-1:2009
ISO 3890-2:2009
ISO 11865:2009
ISO 11870:2009
ISO 12078:2006 (reconfirmed)
ISO 12080-1:2009
ISO 12080-2:2009
ISO 14378:2009
ISO 18252:2006 (reconfirmed)
ISO/TS 6579-2:2012
ISO 20838:2006 (reconfirmed)
ISO 21871:2006 (reconfirmed)
TC 37 Terminology and other language and content resources
ISO 639-2:1998 (reconfirmed)
ISO 639-3:2007 (reconfirmed)
ISO 639-4:2010
ISO 1951:2007 (reconfirmed)
TC 38 Textiles
ISO 12952-1:2010
ISO 12952-2:2010
TC 39 Machine tools
ISO 3190:1975 (reconfirmed)
ISO Update, Supplement to ISO Focus -- June 2016 15
ISO 5734:1986 (reconfirmed)
TC 46 Information and documentation
ISO 17933:2000 (reconfirmed)
ISO 15706-2:2007 (reconfirmed)
TC 63 Glass containers
ISO 7348:1992 (reconfirmed)
ISO 9100-4:2005 (reconfirmed)
ISO 9100-8:2005 (reconfirmed)
ISO 9100-9:2005 (reconfirmed)
TC 67 Materials, equipment and offshore structures for petroleum, petrochemi-cal and natural gas industries
ISO 15590-2:2003
ISO 15590-3:2004
ISO 13535:2000
ISO 13678:2010
TC 79 Light metals and their alloys
ISO 2128:2010
ISO 6719:2010
ISO 7759:2010
TC 92 Fire safety
ISO 834-8:2002 (reconfirmed)
ISO 3008:2007 (reconfirmed)
TC 120 Leather
ISO 2821:1974 (reconfirmed)
ISO 2822-1:1998 (reconfirmed)
ISO 4683-1:1998 (reconfirmed)
ISO 4683-2:1999 (reconfirmed)
TC 127 Earth-moving machinery
ISO 5005:1977 (reconfirmed)
ISO 6483:1980 (reconfirmed)
ISO 6485:1980 (reconfirmed)
ISO 7451:2007 (reconfirmed)
ISO 10268:1993 (reconfirmed)
ISO 10532:1995 (reconfirmed)
ISO 21507:2010
TC 155 Nickel and nickel alloys
ISO 6501:1988 (reconfirmed)
TC 161 Control and protective devices for gas and/or oil burners and appliances
ISO 23551-3:2005 (reconfirmed)
TC 163 Thermal performance and energy use in the built environment
ISO 9251:1987 (reconfirmed)
TC 171 Document management applications
ISO 29861:2009
TC 173 Assistive products for persons with disability
ISO 11199-1:1999 (reconfirmed)
ISO 24415-1:2009
TC 184 Automation systems and integration
ISO 10303-1:1994 (reconfirmed)
ISO 10303-46:2011
ISO 13584-20:1998
(reconfirmed)
TC 189 Ceramic tile
ISO 10545-16:2010
TC 190 Soil quality
ISO 23611-3:2007 (reconfirmed)
TC 204 Intelligent transport systems
ISO 17572-2:2015
JTC 1 Information technology
ISO/IEC 9796-2:2010
ISO/IEC 9798-1:2010
ISO/IEC 9798-4:1999
(reconfirmed)
ISO/IEC 9798-6:2010
ISO/IEC 11770-1:2010
ISO/IEC 13888-2:2010
ISO/IEC 18033-3:2010
Standards withdrawn
Period from 01 May to 31 May 2016
TC 6 Paper, board and pulps
ISO 5636-1:1984 (replaced by )
TC 21 Equipment for fire protection and fire fighting
ISO 6790:1986 (replaced by )
TC 34 Food products
ISO/TS 16634-2:2009
(replaced by ISO 16634-2:2016)
ISO/TS 21033:2011
(replaced by ISO 21033:2016)
ISO/TS 21033:2011/Amd 1:2012
(replaced by ISO 21033:2016)
TC 46 Information and documentation
ISO/TR 15489-2:2001
(replaced by )
TC 108 Mechanical vibration, shock and condi-tion monitoring
ISO 5347-7:1993 (replaced by ISO 16063-17:2016)
TC 213 Dimensional and geometrical product specifications and verification
ISO 14660-2:1999 (replaced by ISO 17450-3:2016)
JTC 1 Information technology
ISO/IEC 26702:2007
(replaced by ISO/IEC/IEEE 24748-4:2016)
16 ISO Update, Supplement to ISO Focus -- June 2016
Meeting calendar
(update at 01 May 2016)
Meetings called for the month of April are not in this edition.
* Information definite but meeting not yet formally convened
** Provisional
June 2016
6-7 Heerbrugg (Switzerland)
TC 172/SC 6 Optics and photonics/Geodetic and survey-ing instruments
6-8 Paris (France) TC 220 Cryogenic vessels
6-9 Rome (Italy) TC 249 Traditional chinese medicine
6-10 Hokaido (Japan) JTC 1/SC 31 Information technol-ogy/Automatic iden-tification and data capture techniques
6-10 London (United Kingdom)
* TC 69/SC 1 Applications of statis-tical methods/Termi-nology and symbols
6-10 London (United Kingdom)
TC 69/SC 4 Applications of statistical methods/Applications of statistical methods in product and process management
6-10 London (United Kingdom)
TC 69/SC 5 Applications of sta-tistical methods/Ac-ceptance sampling
6-10 London (United Kingdom)
TC 69/SC 6 Applications of statis-tical methods/Meas-urement methods and results
6-10 London (United Kingdom)
* TC 69/SC 7 Applications of statistical methods/Applications of statistical and related techniques for the implementation of Six Sigma
6-10 London (United Kingdom)
TC 69/SC 8 Applications of sta-tistical methods/Ap-plication of statistical and related methodol-ogy for new technol-ogy and product development
7 Winterthur (Switzerland)
TC 5/SC 11 Ferrous metal pipes and metallic fittings/Metal hoses and expansion joints
7-9 Turin (Italy) TC 274 Light and lighting
7-10 Prague (Czech Republic)
TC 156 Corrosion of metals and alloys
9 Aachen (Germany)
TC 44/SC 13 Welding and allied processes/Braz-ing materials and processes
9-10 Seattle (USA) TC 214 Elevating work platforms
9-16 Portland, Oregon (USA)
JTC 1/SC 28 Information technol-ogy/Office equipment
10 Milan (Italy) TC 17/SC 19 Steel/Technical delivery conditions for steel tubes for pres-sure purposes
10 London (United Kingdom)
TC 69 Applications of statis-tical methods
11-17 Malmö (Sweden) * TC 251 Asset management
13 Geneva (Switzerland)
President's committee
President's committee
13 Stockholm (Sweden)
TC 242 Energy Management
13-17 Memphis (USA) JTC 1/SC 32 Information technolo-gy/Data management and interchange
13-17 Kyoto (Japan) TC 282/SC 1 Water reuse/Treated wastewater reuse for Irrigation
13-17 Kyoto (Japan) TC 282/SC 2 Water reuse/Water reuse in urban areas
13-17 Kyoto (Japan) TC 282/SC 3 Water reuse/Risk and performance evalu-ation of water reuse systems
13-17 Stockholm (Sweden)
TC 301 Energy management and energy saving
14-17 Ekaterinburg (Russian Federation)
REMCO Committee on refer-ence materials
15-16 Geneva (Switzerland)
TMB Technical Manage-ment Board
15-17 Berlin (Germany) TC 44/SC 14 Welding and allied processes/Weld-ing and brazing in aerospace
16 Virtual (Unknown)
CSC/SPC Council/Strategy and Policy Committee (CSC/SPC)
16-17 Geneva (Switzerland)
COPOLCO Committee on con-sumer policy
16-17 Tromsø (Norway) TC 211 Geographic in-formation/Geomatics
18 Munich (Germany)
TC 135/SC 4 Non-destructive testing/Eddy current methods
18 Munich (Germany)
TC 135/SC 8 Non-destructive test-ing/Infrared thermog-raphy for non-de-structive testing
19 Munich (Germany)
* TC 135/SC 2 Non-destructive test-ing/Surface methods
19 Munich (Germany)
TC 135/SC 3 Non-destructive test-ing/Ultrasonic testing
19 Munich (Germany)
TC 135/SC 5 Non-destructive testing/Radiation methods
19 Munich (Germany)
TC 135/SC 6 Non-destructive test-ing/Leak detection methods
20 Munich (Germany)
TC 135 Non-destructive testing
20 Munich (Germany)
TC 135/SC 7 Non-destructive testing/Personnel qualification
20 Munich (Germany)
TC 135/SC 9 Non-destructive test-ing/Acoustic emission testing
ISO Update, Supplement to ISO Focus -- June 2016 17
20-21 Berlin (Germany) TC 22/SC 32 Road vehicles/Elec-trical and electronic components and gen-eral system aspects
20-23 Delft (Netherlands)
TC 272 Forensic sciences
20-24 Frankfurt (Germany)
JTC 1/SC 39 Information technol-ogy/Sustainability for and by Information Technology
20-24 Tedding-ton (United Kingdom)
TC 43/SC 3 Acoustics/Underwa-ter acoustics
20-25 Prague (Czech Republic)
JTC 1/SC 36 Information tech-nology/Information technology for learn-ing, education and training
21 Istanbul (Turkey) TC 120 Leather
21 Istanbul (Turkey) TC 120/SC 3 Leather/Leather products
21-22 Düsseldorf (Germany)
TC 17/SC 10 Steel/Steel for pres-sure purposes
21-22 Berlin (Germany) TC 188/SC 1 Small craft/Personal safety equipment
22 Istanbul (Turkey) TC 120/SC 1 Leather/Raw hides and skins, including pickled pelts
22-23 Porto (Portugal) TC 17/SC 17 Steel/Steel wire rod and wire products
22-23 Porto (Portugal) TC 269 Railway applications
22-23 Porto (Portugal) TC 269/SC 1 Railway applications/Infrastructure
22-23 Porto (Portugal) TC 269/SC 2 Railway applications/Rolling stock
22-23 Porto (Portugal) * TC 269/SC 3 Railway applica-tions/Operations and services
23 Baltimore (USA) TC 8/SC 2 Ships and marine technology/Ma-rine environment protection
23 Schonach (Germany)
TC 29/SC 10 Small tools/Assem-bly tools for screws and nuts, pliers and nippers
23 Istanbul (Turkey) TC 120/SC 2 Leather/Tanned leather
24 Porto (Portugal) TC 17/SC 15 Steel/Railway rails, rails fasteners, wheels and wheelsets
24 Tokyo (Japan) TC 22/SC 41 Road vehicles/Spe-cific aspects for gase-ous fuels
27 Nicosia (Cyprus) * TC 193 Natural gas
27-28 Frankfurt (Germany)
TC 184 Automation systems and integration
29 London (United Kingdom)
TC 107/SC 4 Metallic and other inorganic coatings/Hot dip coatings (galvanized, etc.)
29-30 Beijing (China) TC 20/SC 16 Aircraft and space vehicles/Unmanned aircraft systems
30 Geneva (Switzerland)
* CSC/FIN Council/Council Standing Committee on Finance (CSC/FIN)
30 Saskatoon (Canada)
TC 159/SC 1 Ergonomics/General ergonomics principles
June-July 2016
25-1 Copenhagen (Denmark)
TC 37 Terminology and other language and content resources
27-1 London (United Kingdom)
TC 188 Small craft
27-1 Nicosia (Cyprus) * TC 193/SC 1 Natural gas/Analysis of natural gas
27-1 Nicosia (Cyprus) * TC 193/SC 3 Natural gas/Upstream area
27-1 Hangzhou (China)
TC 268 Sustainable develop-ment in communities
27-1 Hangzhou (China)
** TC 268/SC 1 Sustainable develop-ment in communities/Smart community infrastructures
1st Semester 2016
New Delhi (India) ** TC 34/SC 7 Food products/Spic-es, culinary herbs and condiments
July 2016
5-8 Shanghai (China) TC 8/SC 8 Ships and marine technology/Ship design
7-8 Paris (France) TC 34 Food products
8 Delft (Netherlands)
TC 158 Analysis of gases
14 Tokyo (Japan) TC 261 Additive manufacturing
15 Greenville (USA) ** TC 94/SC 14 Personal safety -- Protective clothing and equipment/Fire-fighters' personal equipment
22 Seoul (Korea, Republic of)
JTC 1/SC 23 Information technolo-gy/Digitally Recorded Media for Informa-tion Interchange and Storage
26-27 Sydney (Australia)
TC 281 Fine Bubble Technology
29 Bologna (Italy) TC 23/SC 7 Tractors and machin-ery for agriculture and forestry/Equipment for harvesting and conservation
August 2016
1-5 Seoul (Korea, Republic of)
* JTC 1/SC 35 Information technol-ogy/User interfaces
19 Berlin (Germany) TC 206 Fine ceramics
22-26 Beijing (China) * JTC 1/SC 24 Information technol-ogy/Computer graph-ics, image processing and environmental data representation
24 Virtual (Unknown)
* CSC/FIN Council/Council Standing Committee on Finance (CSC/FIN)
25 Stockholm (Sweden)
TC 12 Quantities and units
31 Stockholm (Sweden)
TC 6/SC 2 Paper, board and pulps/Test methods and quality specifica-tions for paper and board
(USA) ** TC 91 Surface active agents
August-September 2016
18 ISO Update, Supplement to ISO Focus -- June 2016
29-3 Seoul (Korea, Republic of)
TC 207 Environmental management
31-1 Berlin (Germany) * TC 44/SC 10 Welding and allied processes/Quality management in the field of welding
September 2016
1 Stockholm (Sweden)
TC 6 Paper, board and pulps
5-9 Bilbao (Spain) TC 108/SC 4 Mechanical vibration, shock and condition monitoring/Human exposure to me-chanical vibration and shock
5-9 Edinburgh (Unit-ed Kingdom)
TC 292 Security and resilience
5-10 Changsha (China)
* TC 96/SC 6 Cranes/Mobile cranes
5-10 Sydney (Australia)
TC 147 Water quality
6 Xian (China) * TC 263 Coalbed methane (CBM)
9 Beijing (China) President's committee
President's committee
10 Beijing (China) TMB Technical Manage-ment Board
10-16 San José, Cali-fornia (USA)
* TC 130 Graphic technology
11 Beijing (China) * COUNCIL Council
11 Beijing (China) DEVCO Committee on devel-oping country matters
11-16 Tromsø (Norway) * TC 106/SC 1 Dentistry/Filling and restorative materials
11-16 Tromsø (Norway) * TC 106/SC 2 Dentistry/Prosthodon-tic materials
11-16 Tromsø (Norway) * TC 106/SC 3 Dentistry/Terminology
11-16 Tromsø (Norway) * TC 106/SC 4 Dentistry/Dental instruments
11-16 Tromsø (Norway) * TC 106/SC 6 Dentistry/Dental equipment
11-16 Tromsø (Norway) ** TC 106/SC 7 Dentistry/Oral care products
11-16 Tromsø (Norway) * TC 106/SC 8 Dentistry/Dental implants
11-16 Tromsø (Norway) * TC 106/SC 9 Dentistry/Dental CAD/CAM systems
12-13 Beijing (China) * GA General Assembly
12-13 Peterbor-ough (United Kingdom)
TC 23/SC 13 Tractors and machin-ery for agriculture and forestry/Powered lawn and garden equipment
12-13 Stavanger (Norway)
* TC 67/SC 7 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Offshore structures
13 Beijing (China) CSC/FIN Council/Council Standing Committee on Finance (CSC/FIN)
13 Beijing (China) ** CSC/SPC Council/Strategy and Policy Committee (CSC/SPC)
13 Sao Paulo (Brazil)
TC 173/SC 7 Assistive products for persons with disabil-ity/Accessible design
14-16 Peterbor-ough (United Kingdom)
TC 23/SC 17 Tractors and machin-ery for agriculture and forestry/Manu-ally portable forest machinery
19-20 Xian (China) TC 33 Refractories
19-22 Atlanta (USA) * TC 142 Cleaning equipment for air and other gases
19-23 Berlin (Germany) ** TC 61 Plastics
19-23 Sydney (Australia)
* TC 150 Implants for surgery
19-25 Melbourne (Australia)
* TC 165 Timber structures
19-30 Shanghai (China) ** TC 213 Dimensional and geometrical product specifications and verification
20-21 Seoul (Korea, Republic of)
* TC 221 Geosynthetics
20-21 Stockholm (Sweden)
TC 264 Fireworks
20-22 Yichang (China) ** TC 256 Pigments, dyestuffs and extenders
22-24 Beijing (China) TC 17/SC 1 Steel/Methods of de-termination of chemi-cal composition
23 Annapolis (USA) TC 194 Biological and clinical evaluation of medical devices
23 Barcelona (Spain)
* TC 254 Safety of amusement rides and amusement devices
26-29 Haarlem (Netherlands)
* TC 157 Non-systemic con-traceptives and STI barrier prophylactics
26-30 San José, Cali-fornia (USA)
JTC 1/SC 2 Information technol-ogy/Coded character sets
26-30 Seoul (Korea, Republic of)
** JTC 1/SC 34 Information tech-nology/Document description and pro-cessing languages
26-30 Beijing (China) TC 8 Ships and marine technology
26-30 Burlington, Ver-mont (USA)
** TC 146/SC 3 Air quality/Ambient atmospheres
26-30 Burlington, Ver-mont (USA)
TC 146/SC 6 Air quality/Indoor air
26-30 Berlin (Germany) ** TC 163 Thermal performance and energy use in the built environment
26-30 Berlin (Germany) ** TC 205 Building environment design
26-30 (Canada) ** TC 218 Timber
27 Beijing (China) * TC 8/SC 13 Ships and marine technology/Marine technology
27 Paris (France) TC 17/SC 20 Steel/General techni-cal delivery condi-tions, sampling and mechanical testing methods
27-29 Moscow (Rus-sian Federation)
* TC 232 Learning services outside formal education
ISO Update, Supplement to ISO Focus -- June 2016 19
28 Delft (Netherlands)
* TC 28/SC 5 Petroleum products and related products of synthetic or bio-logical origin/Meas-urement of refriger-ated hydrocarbon and non-petroleum based liquefied gaseous fuels
28-29 Delft (Netherlands)
* TC 28/SC 2 Petroleum products and related products of synthetic or bio-logical origin/Meas-urement of petroleum and related products
28-30 Berlin (Germany) TC 44/SC 3 Welding and allied processes/Welding consumables
29 Delft (Netherlands)
* TC 28/SC 4 Petroleum products and related prod-ucts of synthetic or biological origin/Classifications and specifications
29 Delft (Netherlands)
* TC 28/SC 7 Petroleum products and related products of synthetic or bio-logical origin/Liquid Biofuels
29 Burlington, Ver-mont (USA)
TC 146/SC 2 Air quality/Workplace atmospheres
29 Burlington, Ver-mont (USA)
TC 146/SC 4 Air quality/General aspects
29 Berlin (Germany) TC 266 Biomimetics
29-30 Courbevoie, Paris (France)
TC 17 Steel
30 Delft (Netherlands)
TC 28 Petroleum products and related products of synthetic or bio-logical origin
30 Milan (Italy) ** TC 39/SC 4 Machine tools/Wood-working machines
30 Burlington, Ver-mont (USA)
** TC 146/SC 1 Air quality/Stationary source emissions
Vienna (Austria) ** JTC 1/SC 22 Information technol-ogy/Programming languages, their envi-ronments and system software interfaces
(Asia) ** TC 31/SC 9 Tyres, rims and valves/Valves for tube and tubeless tyres
Sao Paulo (Brazil)
** TC 173 Assistive products for persons with disability
Sao Paulo (Brazil)
** TC 173/SC 1 Assistive products for persons with disability/Wheelchairs
Sao Paulo (Brazil)
** TC 209 Cleanrooms and as-sociated controlled environments
Singapore (Singapore)
** TC 260 Human resource management
3rd Quarter 2016
(Turkey) ** TC 34/SC 3 Food products/Fruits and vegetables and their derived products
Seoul (Korea, Republic of)
** TC 92/SC 1 Fire safety/Fire initia-tion and growth
October 2016
2-7 Seattle (USA) * TC 184/SC 4 Automation systems and integration/Indus-trial data
2-7 Auckland (New Zealand)
* TC 204 Intelligent transport systems
3-7 Pretoria (South Africa)
* PC 273 Customer contact centres
4-7 London (United Kingdom)
* TC 22/SC 34 Road vehicles/Propul-sion, powertrain and powertrain fluids
5 London (United Kingdom)
TC 70/SC 7 Internal combustion engines/Tests for lubricating oil filters
5 Helsinki (Finland) ** TC 82/SC 7 Mining/Mine closure and reclamation management
5-6 Paris (France) ** TC 79/SC 2 Light metals and their alloys/Or-ganic and anodic oxidation coatings on aluminium
5-6 Chicago (USA) * TC 105 Steel wire ropes
5-7 Madrid (Spain) * TC 225 Market, opinion and social research
5-10 Berlin (Germany) TC 59/SC 17 Buildings and civil en-gineering works/Sus-tainability in buildings and civil engineering works
6 Virtual (Unknown)
* President's committee
President's committee
6 Tokyo (Japan) * TC 67/SC 9 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Liquefied natural gas installations and equipment
6 Berlin (Germany) TC 119/SC 2 Powder metallurgy/Sampling and testing methods for powders (including powders for hardmetals)
6 Berlin (Germany) TC 119/SC 3 Powder metallurgy/Sampling and testing methods for sintered metal materials (ex-cluding hardmetals)
6 Matsue (Japan) TC 183 Copper, lead, zinc and nickel ores and concentrates
6-7 Helsinki (Finland) * TC 82 Mining
6-7 Berlin (Germany) TC 119 Powder metallurgy
7 Berlin (Germany) TC 119/SC 4 Powder metallurgy/Sampling and test-ing methods for hardmetals
10-13 Bucarest (Romania)
* TC 172/SC 1 Optics and photon-ics/Fundamental standards
10-14 Hoffman Estates, Illinois (USA)
* TC 58/SC 2 Gas cylinders/Cylin-der fittings
10-14 Tokyo (Japan) TC 153 Valves
11-12 Beijing (China) * TC 298 Rare earth
12-13 Hangzhou (China)
* TC 70/SC 8 Internal combus-tion engines/Ex-haust gas emission measurement
20 ISO Update, Supplement to ISO Focus -- June 2016
13-15 Seoul (Korea, Republic of)
TC 201 Surface chemical analysis
14 Hangzhou (China)
* TC 70 Internal combustion engines
17-21 Berlin (Germany) ** JTC 1/SC 38 Information technol-ogy/Cloud Comput-ing and Distributed Platforms
17-21 Moscow (Rus-sian Federation)
* TC 20 Aircraft and space vehicles
17-21 London (United Kingdom)
TC 58/SC 3 Gas cylinders/Cylin-der design
17-21 Kyoto (Japan) * TC 138 Plastics pipes, fittings and valves for the transport of fluids
17-21 Berlin (Germany) TC 154 Processes, data elements and documents in com-merce, industry and administration
17-21 Berlin (Germany) * TC 181 Safety of toys
17-21 Amman (Jordan) * TC 262 Risk management
18 Shanghai (China) * TC 2/SC 14 Fasteners/Surface coatings
18-19 Tokyo (Japan) * TC 17/SC 17 Steel/Steel wire rod and wire products
19 Shanghai (China) * TC 2/SC 7 Fasteners/Reference standards
19-21 Philadelphia (USA)
** TC 202 Microbeam analysis
20 Shanghai (China) * TC 2/SC 12 Fasteners/Fasteners with metric internal thread
20 (China) ** TC 5/SC 2 Ferrous metal pipes and metallic fittings/Cast iron pipes, fit-tings and their joints
20 (China) ** TC 5/SC 10 Ferrous metal pipes and metallic fittings/Metallic flanges and their joints
20-21 Tokyo (Japan) TC 17/SC 16 Steel/Steels for the reinforcement and prestressing of concrete
20-21 London (United Kingdom)
* TC 58 Gas cylinders
20-21 Vienna (Austria) * TC 227 Springs
21 Shanghai (China) * TC 2/SC 11 Fasteners/Fasteners with metric external thread
21 (China) ** TC 5 Ferrous metal pipes and metallic fittings
22-23 Orlando (USA) TC 24/SC 4 Particle charac-terization includ-ing sieving/Particle characterization
23-27 Abu Dhabi (United Arab Emirates)
* JTC 1/SC 27 Information tech-nology/IT Security techniques
23-27 Abu Dhabi (United Arab Emirates)
* JTC 1/SC 27 Information tech-nology/IT Security techniques
24 Tokyo (Japan) * TC 79/SC 9 Light metals and their alloys/Symbolization
24-26 Tokyo (Japan) ** TC 79/SC 11 Light metals and their alloys/Titanium
24-28 Tokyo (Japan) ** TC 79 Light metals and their alloys
24-28 Tokyo (Japan) ** TC 164 Mechanical testing of metals
24-28 Sydney (Australia)
* TC 172/SC 7 Optics and photon-ics/Ophthalmic optics and instruments
24-28 Saint-Denis (France)
* TC 190/SC 4 Soil quality/Biological methods
24-28 Athens (Greece) * TC 258 Project, programme and portfolio management
25 Tokyo (Japan) * TC 79/SC 4 Light metals and their alloys/Unalloyed (refined) aluminium ingots
25 Tokyo (Japan) TC 79/SC 6 Light metals and their alloys/Wrought aluminium and alu-minium alloys
26 Abu Dhabi (United Arab Emirates)
* JTC 1/SC 27 Information tech-nology/IT Security techniques
26-27 Osaka (Japan) * TC 126 Tobacco and tobacco products
26-28 (United Kingdom)
** TC 123 Plain bearings
26-28 Tokyo (Japan) * TC 172/SC 5 Optics and photon-ics/Microscopes and endoscopes
27 Tokyo (Japan) TC 79/SC 5 Light metals and their alloys/Magnesium and alloys of cast or wrought magnesium
27-28 Orlando (USA) TC 17/SC 12 Steel/Continuous mill flat rolled products
Berlin (Germany) ** TC 59 Buildings and civil engineering works
(Greece) ** TC 180 Solar energy
October-November 2016
30-4 Kuala Lumpur (Malaysia)
** TC 45 Rubber and rubber products
31-4 Seoul (Korea, Republic of)
* TC 23/SC 6 Tractors and machin-ery for agriculture and forestry/Equipment for crop protection
November 2016
1-4 Arlington (USA) ** TC 22/SC 36 Road vehicles/Safety and impact testing
4 Mainz (Germany) * TC 291 Domestic gas cook-ing appliances
7-8 Seoul (Korea, Republic of)
* TC 159/SC 4 Ergonomics/Ergo-nomics of human-system interaction
7-8 London (United Kingdom)
* TC 241 Road traffic safety management systems
7-11 Sydney (Australia)
* TC 98 Bases for design of structures
7-12 Lillehammer (Norway)
** JTC 1 Information technology
8-10 Kobe (Japan) * TC 212 Clinical laboratory testing and in vitro di-agnostic test systems
10-11 Bern (Switzerland)
* TC 34/SC 12 Food products/Sen-sory analysis
13-17 (Norway) ** TC 215 Health informatics
ISO Update, Supplement to ISO Focus -- June 2016 21
14-15 Toronto (Canada) * TC 44/SC 10 Welding and allied processes/Quality management in the field of welding
14-18 Toronto (Canada) * TC 44 Welding and allied processes
15-16 Toronto (Canada) * TC 44/SC 7 Welding and allied processes/Represen-tation and terms
15-17 Boulogne sur Mer (France)
* TC 22/SC 39 Road vehicles/Ergonomics
16 Toronto (Canada) * TC 44/SC 5 Welding and allied processes/Testing and inspection of welds
16 Toronto (Canada) * TC 44/SC 9 Welding and allied processes/Health and safety
17 Hiroshima City (Japan)
* TC 244 Industrial furnaces and associated pro-cessing equipment
17-18 Orlando (USA) * TC 299 Robotics
22-24 Christchurch (New Zealand)
** TC 20/SC 1 Aircraft and space vehicles/Aerospace electrical requirements
24-25 London (United Kingdom)
* TC 281 Fine Bubble Technology
(China) ** TC 134 Fertilizers and soil conditioners
Tel Aviv (Israel) ** TC 282 Water reuse
Tel Aviv (Israel) ** TC 282/SC 1 Water reuse/Treated wastewater reuse for Irrigation
Tel Aviv (Israel) ** TC 282/SC 2 Water reuse/Water reuse in urban areas
Tel Aviv (Israel) ** TC 282/SC 3 Water reuse/Risk and performance evalu-ation of water reuse systems
November-December 2016
9-1 Tokyo (Japan) * PC 294 Guidance on unit pricing
December 2016
1-2 Sapporo (Japan) * TC 265 Carbon dioxide capture, transporta-tion, and geological storage
5-9 Sydney (Australia)
* TC 217 Cosmetics
6-9 Dublin (Ireland) * TC 275 Sludge recovery, recycling, treatment and disposal
8-9 Petten (Netherlands)
TC 197 Hydrogen technologies
9 Berlin (Germany) * TC 44/SC 6 Welding and allied processes/Resistance welding and allied mechanical joining
4th Quarter 2016
(India) ** TC 113 Hydrometry
2nd Semester 2016
(Europe) ** TC 31/SC 5 Tyres, rims and valves/Agricultural tyres and rims
(Europe) ** TC 31/SC 6 Tyres, rims and valves/Off-the-road tyres and rims
(Europe) ** TC 31/SC 7 Tyres, rims and valves/Industrial tyres and rims
Florence (Italy) ** TC 160 Glass in building
Florence (Italy) ** TC 160/SC 1 Glass in build-ing/Product considerations
Florence (Italy) ** TC 160/SC 2 Glass in building/Use considerations
January 2017
16-20 Tokyo (Japan) ** TC 107 Metallic and other inorganic coatings
February 2017
6-10 Berlin (Germany) ** JTC 1/SC 35 Information technol-ogy/User interfaces
6-12 (South Africa) ** TC 58/SC 4 Gas cylinders/Opera-tional requirements for gas cylinders
22-23 Kuala Lumpur (Malaysia)
** TMB Technical Manage-ment Board
March 2017
6 Kyoto (Japan) ** TC 60 Gears
16-17 Geneva (Switzerland)
** COUNCIL Council
27-31 Chengdu (China) * JTC 1/SC 38 Information technol-ogy/Cloud Comput-ing and Distributed Platforms
1st Quarter 2017
(Tunisia) ** JTC 1/SC 6 Information technol-ogy/Telecommunica-tions and information exchange between systems
April 2017
3-4 Chicago (USA) * TC 117 Fans
10 Guilin (China) ** TC 29/SC 8 Small tools/Tools for pressing and moulding
18-22 Hamilton (New Zealand)
* JTC 1/SC 27 Information tech-nology/IT Security techniques
24-25 Hamilton (New Zealand)
* JTC 1/SC 27 Information tech-nology/IT Security techniques
26 Milan (Italy) * TC 67/SC 2 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Pipeline transporta-tion systems
(Unknown) ** TC 34/SC 15 Food products/Coffee
(Côte-d'Ivoire) ** TC 34/SC 18 Food products/Cocoa
Hangzhou (China)
** TC 215 Health informatics
May 2017
8 Berlin (Germany) * TC 171/SC 1 Document manage-ment applications/Quality, preserva-tion and integrity of information
8-12 Stockholm (Sweden)
* TC 10 Technical product documentation
22 ISO Update, Supplement to ISO Focus -- June 2016
8-12 Vienna (Austria) * TC 39/SC 2 Machine tools/Test conditions for metal cutting machine tools
8-12 Seoul (Korea, Republic of)
* TC 161 Control and protec-tive devices for gas and/or oil burners and appliances
8-12 Berlin (Germany) ** TC 171 Document manage-ment applications
15-18 (USA) ** TC 85/SC 5 Nuclear energy, nuclear technolo-gies, and radiological protection/Nuclear in-stallations, processes and technologies
15-19 Washington, D.C (USA)
* TC 4 Rolling bearings
15-19 Seattle (USA) * TC 31 Tyres, rims and valves
15-19 Seattle (USA) * TC 31/SC 3 Tyres, rims and valves/Passenger car tyres and rims
15-19 Seattle (USA) * TC 31/SC 10 Tyres, rims and valves/Cycle, moped, motorcycle tyres and rims
18 Jeju (Korea, Republic of)
* TC 67/SC 5 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Casing, tubing and drill pipe
22-26 Pretoria (South Africa)
* TC 46/SC 4 Information and documentation/Tech-nical interoperability
22-26 (USA) ** TC 121/SC 1 Anaesthetic and res-piratory equipment/Breathing attach-ments and anaes-thetic machines
Stockholm (Sweden)
** TC 10/SC 6 Technical product documentation/Me-chanical engineering documentation
(Sweden) ** TC 29 Small tools
(Unknown) ** TC 226 Materials for the production of primary aluminium
May-June 2017
27-2 (Ireland) ** TC 238 Solid biofuels
31-2 Delft (Netherlands)
** TC 145 Graphical symbols
June 2017
14-15 Geneva (Switzerland)
** TMB Technical Manage-ment Board
19-23 Tokyo (Japan) ** TC 34/SC 9 Food products/Microbiology
19-23 (Portugal) ** TC 149/SC 1 Cycles/Cycles and major sub-assemblies
(Australia) ** JTC 1/SC 36 Information tech-nology/Information technology for learn-ing, education and training
(USA) ** TC 42 Photography
2nd Quarter 2017
Tsukuba (Japan) ** TC 92 Fire safety
July 2017
24-28 Paris (France) * JTC 1/SC 35 Information technol-ogy/User interfaces
(Unknown) ** JTC 1/SC 34 Information tech-nology/Document description and pro-cessing languages
September 2017
11-15 Chicago (USA) * JTC 1/SC 32 Information technolo-gy/Data management and interchange
11-15 San Francisco (USA)
* JTC 1/SC 38 Information technol-ogy/Cloud Comput-ing and Distributed Platforms
18 Berlin (Germany) * COUNCIL Council
19 Berlin (Germany) ** TMB Technical Manage-ment Board
20-22 Berlin (Germany) ** GA General Assembly
25-29 (Unknown) ** TC 58/SC 2 Gas cylinders/Cylin-der fittings
(China) ** JTC 1/SC 2 Information technol-ogy/Coded character sets
London (United Kingdom)
** JTC 1/SC 22 Information technol-ogy/Programming languages, their envi-ronments and system software interfaces
(Japan) ** TC 20/SC 1 Aircraft and space vehicles/Aerospace electrical requirements
Vienna (Austria) ** TC 165 Timber structures
(Japan) ** TC 213 Dimensional and geometrical product specifications and verification
(Nigeria) ** TC 260 Human resource management
3rd Quarter 2017
Vienna (Austria) ** TC 289 Brand evaluation
October 2017
2-7 Vladivostok (Russian Federation)
* JTC 1 Information technology
8 New Orleans (USA)
* TC 38 Textiles
9-13 New Delhi (India) ** TC 178 Lifts, escalators and moving walks
11 New Orleans (USA)
* TC 38/SC 1 Textiles/Tests for coloured textiles and colorants
11 New Orleans (USA)
* TC 38/SC 2 Textiles/Cleansing, finishing and water resistance tests
12 New Orleans (USA)
* TC 38/SC 23 Textiles/Fibres and yarns
12 New Orleans (USA)
* TC 38/SC 24 Textiles/Condition-ing atmospheres and physical tests for textile fabrics
22-27 Hawaii (USA) * TC 45 Rubber and rubber products
23-27 (China) ** TC 39/SC 2 Machine tools/Test conditions for metal cutting machine tools
November 2017
ISO Update, Supplement to ISO Focus -- June 2016 23
(India) ** TC 54 Essential oils
London (United Kingdom)
** TC 215 Health informatics
Month unknown 2017
(North America) ** JTC 1/SC 24 Information technol-ogy/Computer graph-ics, image processing and environmental data representation
Erlangen (Germany)
** TC 36 Cinematography
(South Africa) ** TC 46 Information and documentation
(South Africa) ** TC 46/SC 11 Information and doc-umentation/Archives/records management
(United Kingdom)
** TC 94/SC 13 Personal safety -- Protective clothing and equipment/Pro-tective clothing
(USA) ** TC 198 Sterilization of health care products
Milan (Italy) ** TC 206 Fine ceramics
February 2018
12-18 (Sweden) ** TC 58/SC 4 Gas cylinders/Opera-tional requirements for gas cylinders
1st Quarter 2018
(Netherlands) ** JTC 1/SC 35 Information technol-ogy/User interfaces
June 2018
(Korea, Repub-lic of)
** JTC 1/SC 36 Information tech-nology/Information technology for learn-ing, education and training
September 2018
(Japan) ** TC 61 Plastics
3rd Quarter 2018
(Japan) ** JTC 1/SC 35 Information technol-ogy/User interfaces
(Netherlands) ** TC 92 Fire safety
October 2018
(Malaysia) ** TC 215 Health informatics
Month unknown 2018
(Europe) ** JTC 1/SC 24 Information technol-ogy/Computer graph-ics, image processing and environmental data representation
(China) ** TC 45 Rubber and rubber products
(USA) ** TC 94/SC 13 Personal safety -- Protective clothing and equipment/Pro-tective clothing
Milan (Italy) ** TC 161 Control and protec-tive devices for gas and/or oil burners and appliances
Month unknown 2019
(Asia) ** JTC 1/SC 24 Information technol-ogy/Computer graph-ics, image processing and environmental data representation
Month unknown 2020
(North America) ** JTC 1/SC 24 Information technol-ogy/Computer graph-ics, image processing and environmental data representation