iso 2285

ICS 83.060 Elastomere oder thermoplastische Elastomere – Bestimmung des Zugverformungsrestes unter konstanter Dehnung und des Zugver- formungsrestes, der Dehnung und des Fließens unter konstanter Zugbelastung (ISO 2285 : 2001) This standard incorporates International Standard ISO 2285 Rubber, vulcanized or thermoplastic – Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load. A comma is used as the decimal marker. National foreword This standard has been prepared by ISO/TC 45 ‘Rubber and rubber products’. The responsible German body involved in its preparation was the Normenausschuss Materialprüfung (Materials Testing Standards Committee), Technical Committee Prüfung der physikalischen Eigenschaften von Elastomeren. DIN ISO 471 and DIN ISO 4661-1 are the standards corresponding to International Standards ISO 471 and ISO 4661-1, respectively, referred to in clause 2 of the ISO Standard. Amendments This standard differs from the May 1994 edition in that two new methods of cooling the test pieces have been specified (cf. subclause 6.1.3) and the specifications for straining test pieces have been amended. Previous editions DIN 53518: 1965-09, 1979-03; DIN ISO 2285: 1994-05. Ref. No. DIN ISO 2285 : 2003-07 English price group 08 Sales No. 0408 11.03 DEUTSCHE NORM July 2003 ISO 2285 { Continued overleaf. ISO Standard comprises 11 pages. © No part of this standard may be reproduced without the prior permission of DIN Deutsches Institut für Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany, has the exclusive right of sale for German Standards (DIN-Normen). Rubber, vulcanized or thermoplastic Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load (ISO 2285 : 2001) Supersedes May 1994 edition.

Upload: selcuk-tosun

Post on 28-Oct-2015

75 views

Category:

Documents

4 download

Report

Download

Tags:

Embed Size (px):

TRANSCRIPT

ICS 83.060

Elastomere oder thermoplastische Elastomere – Bestimmung desZugverformungsrestes unter konstanter Dehnung und des Zugver-formungsrestes, der Dehnung und des Fließens unter konstanterZugbelastung (ISO 2285 : 2001)

This standard incorporates International StandardISO 2285 Rubber, vulcanized or thermoplastic – Determination of tension set under constant elongation,

and of tension set, elongation and creep under constant tensile load.

A comma is used as the decimal marker.

National forewordThis standard has been prepared by ISO/TC 45 ‘Rubber and rubber products’.The responsible German body involved in its preparation was the Normenausschuss Materialprüfung(Materials Testing Standards Committee), Technical Committee Prüfung der physikalischen Eigenschaftenvon Elastomeren.DIN ISO 471 and DIN ISO 4661-1 are the standards corresponding to International Standards ISO 471 andISO 4661-1, respectively, referred to in clause 2 of the ISO Standard.

AmendmentsThis standard differs from the May 1994 edition in that two new methods of cooling the test pieces have beenspecified (cf. subclause 6.1.3) and the specifications for straining test pieces have been amended.

Previous editionsDIN 53518: 1965-09, 1979-03; DIN ISO 2285: 1994-05.

Ref. No. DIN ISO 2285 : 2003-07English price group 08 Sales No. 0408

11.03

DEUTSCHE NORM July 2003

ISO 2285{

Continued overleaf.ISO Standard comprises 11 pages.

© No part of this standard may be reproduced without the prior permission ofDIN Deutsches Institut für Normung e.V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).

Rubber, vulcanized or thermoplasticDetermination of tension set under constant elongation, and oftension set, elongation and creep under constant tensile load

(ISO 2285 : 2001)

Supersedes May 1994 edition.

Rubber, vulcanized or thermoplasticDetermination of tension set under constant elongation, and oftension set, elongation and creep under constant tensile load

Page 1ISO 2285 : 2001