ip-66 (iec-529) polymel...8 himel wall mounting polyester enclosures polymel ip-66 (iec-529) a 310...
TRANSCRIPT
We at Himel take pridein leading the pace inthe design andmanufactureof glass reinforcedpolyester enclosures,ideal for protection ofpeople andinstallations in theworst environmentalconditions.As well as for beingrecognised world-wideas first class serviceproviders.
Bureau
Veritas
Instituto
Italiano del
Marchio di
Qualità
Lloyd’s
Register
Laboratori
General
d’Assaigs i
Investigacions
Underwriters
Laboratories
Germanischer
Lloyd
product certifications
POLYMEL remainsimmutable over the timewhilst it protects yourinstallation against thetoughest workingconditions.
solu
timeless
POLYMEL makes your workeasy. It can be equipped andcustomised with differentcolours, cut-outs, locks, etc.at the factory just followingyour requirement.
Himel offers the widest rangeof GRP enclosures. More than30 Modular boxes, 16 solutionsfor meter enclosures, 20 wall mounted enclosures, more than 330 floor standing enclosures, and our constant aim for innovation, provide a great range of solutions.
Expanding our possibilitiestions
POLYMEL adapts whatever yourapplication is. Thanks to itsflexible configuration and awide range of accessories.
HIMEL4
general product chart POLYMEL
depth adjustablesupports
mounting plates
glazed doorenclosuresplain door
enclosures
locknormal three-pointheight width depth
externaldimensions
mmlock
normal three point universalmetalinsulating
310 215 160 PLM-32 - PLM-32/KT - MB-32 MM-32 MF-32 MR-32 -
430 330 200 PLM-43 - PLM-43/KT - MB-43 MM-43 MF-43 MR-43 DPLM-200
530 430 200 PLM-54 - PLM-54/KT - MB-54 MM-54 MF-54 MR-54 DPLM-200
647 436 250 PLM-64 PLM-64/CME PLM-64/KT PLM-64 KT/CME MB-64 MM-64 MF-64 MR-64 DPLM-250
747 536 300 PLM-75 PLM-75/CME PLM-75/KT PLM-75 KT/CME MB-75 MM-75 MF-75 MR-75 DPLM-300N
847 636 300 PLM-86 PLM-86/CME PLM-86/KT PLM-86 KT/CME MB-86 MM-86 MF-86 MR-86 DPLM-300N
1000 800 350 PLM-108* - PLM-108/KT* - MB-108 MM-108 MF-108 MR-108 DPLM-350
308 255 160 PLM-3025 - PLM-3025/KT - MB-3025 MM-3025 MF-3025 MR-3025 -
* 4 point locking system enclosures
perforated
5HIMEL
referenceno. of 18 mm
modulesqty. no. of
plates
rails
internaldoor
pole fixingset
supportingpole
DINIMEL chassis
no. ofrows
4 3 66 14 4 88 -
DLA-84DLA-112
240
4 3 84 14 4 112 -
4 3 66 14 4 88 -
- - - - - - - -
DLA-24 2 2 24 - PIP-43 SFP-300 -
DLA-48 3 3 48 - PIP-54 SFP-400 SFS/PLM
DLA-48P 3 3 48 - PIP-64 SFP-400 SFS/PLM
DLA-66 PIP-75 SFP-500 -
PIP-86 SFP-600 -
DLA-240 6 6 240 - PIP-108 - -
DL/PLM18 2 2 18 - PI-3025/PLM - -
6 HIMEL
models, dimensions and references
plaindoor
transparentdoor
three-point lock withhandle lock metal insul. perf.
with insulatingmounting plates
height(A)
width(B)
externaldimensions (mm)
standard lock
transparentdoor
plaindoor
depth(C)
310 215 160 PLM-32* PLM-32/KT* - - PLM-32MB -
308 255 160 PLM-3025PLM-3025/KT - - PLM-3025MB - - -
430 330 200 PLM-43 PLM-43/KT - - PLM-43MB
530 430 200 PLM-54 PLM-54/KT - - PLM-54MB
647 436 250 PLM-64 PLM-64/KT PLM-64/CME PLM-64 KT/CME PLM-64MB
747 536 300 PLM-75 PLM-75/KT PLM-75/CME PLM-75 KT/CME PLM-75MB
847 636 300 PLM-86 PLM-86/KT PLM-86/CME PLM-86 KT/CME PLM-86MB
1056 852 350 PLM-108(1) PLM-108KT(1) - - PLM-108MB
plaindoor
c Prepared for double insulated boards inaccordance with ICE 439-1 (EN 60.439.1)standard.c High resistance to mechanical impactsIK-10 (20 J) in accordance with EN 50.102.c UL approval in accordance with UL 50,grades Nema 4X and 12.c Lock transformations on page 16.
Glass-fibre reinforced polyester cabinets.c One-piece monoblock body.c Colour grey, RAL 7032.c Completely reversible.c Designed for use both indoors andoutdoors.c Wide range of accessories allowing fortheir use in distribution, control andmeasurement panels for industrial andrecreational installations.
c Inserts located at the front of the cabinetfor fixing of distribution chassis and internaldoor.c Self-extinguishing.c Maximum working temperature rangesfrom –50 to 150 oC.c Resistant to principal chemical andatmospheric agents.c Corrosion resistant.c Stable to ultra-violet rays.
POLYMELwall mounting polyester enclosuresIP-66 (IEC-529)
internaldoor
mounting plates modularchassis
depthadjustable
support
* Model PLM-32 in polycarbonate.(1) 4- point locking system enclosure.
universal
7HIMEL
POLYMELwall mounting polyester enclosuresIP-66 (IEC-529)
Built-in canopy which protects the door andits gasket. Lock are located outside thegasketed area.
Internal stainless steel hinges, built in thedoor with safety pins.
Maximum usable space, door provided witha grid pattern for centreing of equipment.Door opening over 180°.
Self-ventilation windows at the rear of thecabinet.
Cabinet with transparent templated glassdoor ref: PLM/KT, maintaining the IP-65and IK-8 (5J) degrees of protection.
4-point locking system enclosure.
8 HIMEL
POLYMELwall mounting polyester enclosuresIP-66 (IEC-529)
A 310 430 530 647 747 847 1056B 215 330 430 436 536 636 852C 160 200 200 250 300 300 350D 310 280 380 480 580 680 864E 215 200 300 300 400 500 694F 270 380 480 580 680 780 980G 170 260 360 360 460 560 760H 225 325 425 525 625 725 925I 125 225 325 325 425 525 725J 275 375 475 575 675 775 975K 75 150 250 250 350 450 650L 8 13 13 13 15 15 15M 144 181 181 228 278 278 327N 2.3 2.7 2.9 2.9 3 3 4P 132 179 279 279 379 479 684Q 129 168 168 212 261 261 304R 186 247 347 388 487 587 776S 121 150 150 192 241 241 267
dimensions (mm)
reference PLM-...43 54 64 75 8632 108
B
Ø 8
5 C
S
N
HRJ
M8
D
A E
16
Q
ML
I
K
P
G
I
F H
❃ three point lock forenclosures PLM-108.
PLM 3025
❃
9HIMEL
metal insulating perforated
mounting platesA complete range of plates which can bedirectly fixed to the enclosure supports or tothe depth adjustable supports provides thesolution to this type of installation.c Made of galvanized steel.c Bakelite insulating plates.c Perforated plates for quick fixingof equipment made of bichromatedzinc-coated steel. The perforated plate withfixing nuts ensures that equipment can befixed in any position.c Perforated plates for quick fixingof equipment made of bichromatedzinc-coated steel plates.
11 � 26 mm
30 30
1515
fixing accessories for perforated plates
type ofthread
fixing bolt with washerfixing nut
M3 TFP 3 100M4 TFP 4 100 TOR 10/4 A 10 100M4 TOR 16/4 A 16 100M5 TFP 5 100 TOR 12/5 A 12 100M5 TOR 18/5 A 18 100M6 TFP 6 100 TOR 12/6 A 12 100M6 - - TOR 18/6 A 18 100
PLM-32 MM-32 2 0.6 MB-32 4 0.3 MF-32 MR-32 0,4 255 154PLM-3025 MM-3025 2 0.8 MB-3025 4 0.3 MF-3025 2 0.5 265 200 MR-3025 0,4 255 201PLM-43 MM-43 2 1.6 MB-43 4 0.6 MF-43 2 1.5 365 250 MR-43 0,7 349 251PLM-54 MM-54 2 2.5 MB-54 4 1.2 MF-54 2 2.4 465 350 MR-54 1,3 450 351PLM-64 MM-64 2 3.1 MB-64 4 1.4 MF-64 2 3 565 350 MR-64 1,6 555 351PLM-75 MM-75 2 4.6 MB-75 4 2.1 MF-75 2 4.3 665 450 MR-75 2,3 645 451PLM-86 MM-86 3 9.9 MB-86 4 3 MF-86 2,5 9 765 550 MR-86 3,2 750 551PLM-108 MM-108 3 16.9 MB-108 5 5.2 MF-108 2,5 16 965 750 MR-108 5 945 751
universal
S EDweight
(kg)
metalto fit to
enclosures reference thickness(mm)
weight(kg)
referencethickness
(mm)weight
(kg) P
POLYMELwall mounting polyester enclosuresIP-66 (IEC-529)
reference referencepack qty. length (mm)packqty.
dimensions (mm)
12.5
P
S
10.5 10.5
MM-1010,MM-1012, MM-128 and MM-1210
P
S
12.5
PS
MF-1010,MF-1012, MF-128 and MF-1210
E
D
15
B-75
A-7
5
12.5
12.5
12.5
12.5
ø3.6
12.5 25 25
2525
20
B-75
A-7
5
ø6.5
ø8.5
universal
reference thickness(mm)
weight(kg)
insulating perforated
reference
10 HIMEL
POLYMELwall mounting polyester enclosuresIP-66 (IEC-529)
* Models DLA-48P, 66, 88, 84 and 112.
Dinimel A distributionchassisDistribution chassis assembly for modularequipment, ref. DLA-... with adjustabledistance between the 35 mm. symmetricalprofile and cover plate from 40 up to85 mm.c Chassis made of galvanized steel.c Cover plate and frame made ofself-extinguishing material to RAL-7035.Quick fixing without screws.c Circuit identification system supplied asstandard.c Terminal blocks for earth and neutralwiring ref. RBLZ/21656 supplied asstandard.
DLA-112 DLA-240
PLM-3025 PLM-3025/KT DL/PLM18 2 2 18 - - - - - -PLM-43 PLM-43/KT DLA-24 2 2 24 - 216 115 137 38 88PLM-54 PLM-54/KT DLA-48 3 3 48 - 288 90 112 38 88PLM-64 PLM-64/KT DLA-48P 3 3 48 - 288 140 170 80 130PLM-75 PLM-75/KT DLA-66 4 3 66 1 395 115 145 129 179PLM-75 PLM-75/KT DLA-88 4 4 88 - 395 115 145 129 179PLM-86 PLM-86/KT DLA-84 4 3 84 1 504 165 195 129 179PLM-86 PLM-86/KT DLA-112 4 4 112 - 504 165 195 129 179PLM-108 PLM-108/KT DLA-240 6 6 240 - 704 115 146 170 220
plaindoor E min.D min.CB
row lay-out
quant.
transparentdoor
to fit to enclosures
referenceno. of
18 mm mod.
breaker railsno. ofplates
no. ofrows
dimensions
A
DLA-66 DLA-88 DLA-84
DLA-24 DLA-48 DLA-48P
11HIMEL
DLA-24 PMP300/DLA 215DLA-48 and 48P PMP400/DLA 315DLA-66 and 88 PMP500/DLA 415DLA-84 and 112 PMP600/DLA 514DLA-240 PMP800/DLA 714
POLYMEL
ATP6/DTM 108 6ATP24/DTM 432 24
referenceL
(mm)no. of
modules
L
55
DLA-24 CTL300/DLA 256DLA-48 and 48P CTL400/DLA 356DLA-66 and 88 CTL500/DLA 456DLA-84 and 112 CTL600/DLA 555DLA-240 CTL800/DLA 755
for fixingto chassis reference width
widthfor fixingto chassis reference
RBLZ/21656 2 � 16 mm2 + 5 � 6 mm2
RBLZ/21686 2 � 16 mm2 + 8 � 6 mm2
RBLZ/216146 2 � 16 mm2 + 14 � 6 mm2
RBLZ/216296 2 � 16 mm2 + 29 � 6 mm2
number of terminals× section in mm2
reference
wall mounting polyester enclosuresIP-66 (IEC-529)
Dinimel A blank cover platePS self-extinguishing insulating cover plate toRAL-7035 for protection of non-modularequipment height 150 mm (1 row).
Dinimel A mounting plateGalvanised steel mounting plate for fixing ofnon-modular equipment height 150 mm(1 row).
blanking plateSelf-extinguishing insulating blanking platesto RAL-7035 to cover totally or partiallywindows for circuit breakers. Can easily becut to desired size.
terminal blocksInsulating base block for earth and neutralwiring. Direct fixing to 12 � 2 mm profile.
12 HIMEL
reference features
TCO/PLM to fit all enclosures
TCO-M6/PLM M6
25
POLYMELwall mounting polyester enclosuresIP-66 (IEC-529)
B
A
B
A
C
D
to fit toenclosures
PLM-43 and 54 DPLM-200 156 94PLM-64 DPLM-250 200 100PLM-75 and 86 DPLM-300N 250 100PLM-108 DPLM-350 306 106
reference
* Internal plain door, A dud B being dimensions ofthe usable surface.
reference
PI-3025/PLM* 248 165 62 76PIP-43 315 205 152 26PIP-54 415 305 152 26PIP-64 515 305 194 32PIP-75 615 405 244 32PIP-86 715 505 244 32PIP-108 850 650 269 37
dimensions (mm)
A B C D
A B
depth adjustable supportsSupports designed to fit 200, 250, 300 and350 mm deep enclosures.Self-positioning slots allowing foradjustment every 12.5 mm.c Made of bichromated zinc coated steel.c Quick fixing to the enclosure.
internal doorsInternal fibre glass reinforced polyester doorassembly.c Self-extinguishing.c Grid pattern on the inside for quickerpositioning of equipment.c Quick locking through 1/4 turn sealablescrews.c Right or left opening.
rail fixing insertInsert nut specially designed to fit to theback of the enclosure for quick fixing of35 mm rails (see page 8) throughself-tapping screws (supplied as standard).c Made of insulating material.
13HIMEL
POLYMELwall mounting polyester enclosuresIP-66 (IEC-529)
wall mounting setAssembly for fixing the cabinet to the wall.It is attached from the outside to the rear ofthe cabinet using inserts and M8 screws(included in the standard supply).The PLM-32 model is fixed by self-tappingscrews.The fixing pieces can be located eithervertically or horizontally.The assembly is not included in thestandard supply.
draining deviceTo remove water from condensation.Fixed to the ø 9 mm housing on the bottomof the enclosure. Protection degree IP-55.
air ventsTo equalize external and internaltemperatures and thus preventcondensation within the enclosure.Can be fixed on the internal sidesconnected with the rear self-ventilatingwindow, ref: VM-35.Protection degree IP 44 when installed.
to fit toenclosures
cable gland plateFlat cable gland plates made of fully-gasketed polyester with fixing screws.
VEA-9
referencefor fitting toenclsoures
PLM 75/86/108 TLA-4420PLM 108 TLA-6420
reference characteristics
for fitting to allcabinets
PLM-32 PF/PLM-32 - 247 239 334 152 - - - - PLM-3025 PF/PLM PFI/PLM 250 332 385 197 250 266 319 197 PLM-43 PF/PLM PFI/PLM 355 360 490 225 355 294 424 225 PLM-54 PF/PLM PFI/PLM 455 460 590 325 455 394 524 325 PLM-64 PF/PLM PFI/PLM 555 465 690 330 555 399 624 330 PLM-75 PF/PLM PFI/PLM 655 565 790 430 655 499 724 430 PLM-86 PF/PLM PFI/PLM 755 665 890 530 755 599 824 530 PLM-108 PF/PLM PFI/PLM 995 885 1090 750 995 819 1064 750
height(H1)
width(H2)
vertical position
height(V1)
width(V2)
dimensions PF/PLM
reference horizontal position
insulation stainlesssteel
height(H1)
width(H2)
vertical position
height(V1)
width(V2)
dimensions PFI/PLM
horizontal position
35 mm symmetric rail35 mm symmetrical rails for the support ofswitchgear, especially adapted to the widthof the cabinets.Fixing to the back of the enclosure bymeans of set TCO/PLM.
PLM-32 CO-200/PLM 180PLM-43 CO-300/PLM 280PLM-54 and 64 CO-400/PLM 380PLM-75 CO-500/PLM 480PLM-86 CO-600/PLM 580PLM-108 CO-800/PLM 795
to fit toenclosures reference width
PF/PLM
15H1
V2H2
V1
8*
* modelo PLM-32y PFI/PLM
*PLM-32 andPFI/PLMmodels
14 HIMEL
POLYMELwall mounting polyester enclosuresIP-66 (IEC-529)
doorsDoor for replacement on PLM enclosures.c Made of glass reinforced polyester toRAL-7032 grey.
398148
185
PLM-3025 PUPLM-3025 KTPLM-3025PLM-43 PUPLM-43 KTPLM-43PLM-54 PUPLM-54 KTPLM-54PLM-64 PUPLM-64 KTPLM-64PLM-75 PUPLM-75 KTPLM-75PLM-86 PUPLM-86 KTPLM-86PLM-108 PUPLM-108 KTPLM-108
transparent
doorto fitto enclosures blind
to fitto enclosures
PLM-75 and 86 lateral BU/PLM PLM-108 lateral BU-108/PLM PLM-86 vertical BU-4420 PLM-108 vertical BU-6420
type joining reference
c Maximum usable surface, plain door withgrill for centreing of components.c Door opening > 180°.
PLM-32 CE-PLM/APLM-43 and 54 CE-PLM/BPLM-64, 75 and 86 CE-PLM/C
referenceto fitto enclosures
expansible nutsExpansible metal nuts to be used in theholes prepared in enclosures.
M5 PLM 43 y 54 TEX 5ME PLM 64 y 108 TEX 6
referenceto fit to
enclosuresdescription
coupling frameFor side to side joining of enclosures.c Made of self-extinguishing fibre glassreinforced polyester.c Gasket to mantain the IP-66 ratingprovided.c Fixing by means of screws included asstandard supply.
rubber grommetsInsulating rubber grommets to cover up therear self-ventilating windows whenever totalprotection is required. Supplied optionally.
padlockingPadlocking of the double bar (standardsupply) triangle and square optionsref. KPLMc 1.5 mm thick stainless steel.c Easy fitting.c Sealable.
15HIMEL
POLYMEL
fixing to the cabinet
fixing to the ground
355 165
200405
800
PLM-43 SFP-300PLM-54 and PLM-64 SFP-400PLM-75 SFP-500PLM-86 SFP-600PLM-108 SFP-800
to fitto enclosures
reference
to fitto enclosures
reference
PLM-54
PLM-64SFS/PLM
pole fixing setAllows the fixing of the enclosure toconcrete, wooden or aluminium poles up to675 mm in perimeter.c For outside installations, building sites,public lighting panels...c Stainless steel clamps and galvanizedsteel profiles.c Fixing of profiles to the inserts on theback of the enclosure through M8 screwssupplied as standard.c Maximum weight recommended for theinstallation: 100 kg.
supporting poleFor protection of incoming and outgoingcables whenever the enclosure must bekept off the ground: outside installations,camping sites, marinas... Made of fibreglass reinforced polyester.c Steel frame for fixing to the ground.c Easy fitting.c High mechanical resistance.
130
200
160 x 100
160 x 100165
251
wall mounting polyester enclosuresIP-66 (IEC-529)
v 6 mm square lock LC-7 TC6/CRN
v 7 mm square lock LC-7 TC7/CRN
v 8 mm square lock LC-8 TC8/CRN
∆ 6.5 mm triangular lock LT-6,5 TT7/CRN
∆ 8 mm triangular lock LT-8 TT8/CRN
wing key lock TL/PLM
stainless steelpadlock KPLM
double back wing key CDB/PLM
optional lock inserts to transform the standard lock
type reference
v 6 mm square lock LC-7 TC 6/PL
v 7 mm square lock LC-7 TC 7/PL
v 8 mm square lock LC-8 TC 8/PL
∆ 7 mm triangular lock LT-8 TT 7/PL
∆ 8 mm triangular lock LT-8 TT 8/PL
padlock BC/PL
optional lock inserts to transform the standard lock
type reference
POLYMEL
optional lock inserts to transform the standard lock
double bar lock LDB 5 TDB/PLD
∆ 8 mm triangular lock LT-8 TT7/PLD
lock with 405 type key TCL/PLD
reinforced lockwith key TLR/PLD
padlock BCME/PL
push buttom lock TEM/PLD
handle for PLM-108 TEM/PL
type reference
key type /reference
key type /reference
key type /reference
locks for wallmounting enclosures
three point locksStandard handle locks without insert in thePLM 64/75/86 CME model.
locksDouble bar standard lock, with stainless zincalloy inserts.c Operation through:LDB 5 key (according to DIN 43668)
4 point locksDouble bar standard lock for the PLM-108model in the normal door or KT transparentdoor versions. They can be optionallysupplied in the PLM-64, PLM-75 y PLM-86models.c Operation through:LDB 5 key (according to DIN 43668)
HISPANO MECANO ELECTRICA, S.A.Aragón, 22408011 BARCELONA (España)Tel.: + 34 93 484 35 00Fax: + 34 93 484 34 89http://www.himelenclosures.com
900044 C01
We reserve the right to alter any detail of design shown inthis catalogue without previous notice. D
ep.
lega
l: B
. 7.
019-
2001