inverters · inverters hsa 'ezdanz ita>z fzance :apan c,ina iszae> asta>ia solaredge...
TRANSCRIPT
Inve
rter
s
www.solaredge.usUSA - GermAny - ItAly - FrAnce - JApAn - chInA - ISrAel - AUStrAlIA
SolarEdge Single Phase Inverters For north America se3000A-Us / se3800A-Us / se5000A-Us / se6000A-Us / se7600A-Us / se10000A-Us / se11400A-Us
12-25
The best choice for SolarEdge enabled systems Integratedarcfaultprotection(Type1)forNEC2011690.11compliance Superiorefficiency(98%) Small,lightweightandeasytoinstallonprovidedbracket Built-inmodule-levelmonitoring InternetconnectionthroughEthernetorWireless Outdoorandindoorinstallation Fixedvoltageinverter,DC/ACconversiononly Pre-assembledAC/DCSafetySwitchforfasterinstallation
© SolarEdge Technologies, Inc. All rights reserved. SOLAREDGE, the SolarEdge logo, OPTIMIZED BY SOLAREDGE are trademarks or registered trademarks of SolarEdge Technologies, Inc. All other trademarks mentioned herein
are trademarks of their respective owners. Date: 02/2014. V.02. Subject to change without notice.
Single Phase Inverters for north America se3000A-Us / se3800A-Us / se5000A-Us / se6000A-Us / se7600A-Us / se10000A-Us / se11400A-Us
SE3000A-US SE3800A-US SE5000A-US SE6000A-US SE7600A-US SE10000A- US SE11400A-USOUTPUT
NominalACPowerOutput 3300 3840 5000 6000 7680 9980@208V10000@240V 11520 VA
Max.ACPowerOutput 3650 4150 5400@208V5450@240V 6000 8350 10800@208V
10950@240V 12000 VA
ACOutputVoltageMin.-Nom.-Max.* 183-208-229Vac - - 3 - - 3 -
ACOutputVoltageMin.-Nom.-Max.* 211-240-264Vac 3 3 3 3 3 3 3
ACFrequencyMin.-Nom.-Max.* 59.3-60-60.5(withHIcountrysetting57-60-60.5) Hz
Max.ContinuousOutputCurrent 14 16 24@208V 21@240V 25 32 48@208V
42@240V 48 A
GFDI 1 AUtilityMonitoring,Islanding Protection,CountryConfigurable Thresholds
Yes
InPUT RecommendedMax.DCPower**(STC) 4100 4800 6250 7500 9600 12400 14400 W
Transformer-less,Ungrounded YesMax.InputVoltage 500 VdcNom.DCInputVoltage 325@208V/350@240V Vdc
Max.InputCurrent*** 11 13 16.5@208V 15.5@240V 18 23.5 33@208V
30.5@240V 35 Adc
Max.InputShortCircuitCurrent 30 45 AdcReverse-PolarityProtection YesGround-FaultIsolationDetection 600k SensitivityMaximumInverterEfficiency 97.7 98.2 98.3 98.3 98 98 98 %
CECWeightedEfficiency 97.5 98 97.5@208V98@240V 97.5 97.5 97@208V
97.5@240V 97.5 %
NighttimePowerConsumption <2.5 <4 WADDITIOnAL FEATURESSupportedCommunicationInterfaces RS485,RS232,Ethernet,ZigBee(optional)STAnDARD COmPLIAnCESafety UL1741,UL1699B,UL1998,CSA22.2 GridConnectionStandards IEEE1547 Emissions FCCpart15classBInSTALLATIOn SPECIFICATIOnS ACoutputconduitsize/AWGrange 3/4”minimum/24-6AWG 3/4”minimum/8-3AWG DCinputconduitsize/#ofstrings/AWGrange 3/4”minimum/1-2strings/24-6AWG 3/4”minimum/1-2strings/14-6AWG
DimensionswithAC/DCSafetySwitch(HxWxD)
30.5x12.5x7/ 775x315x172
30.5x12.5x7.5/ 775x315x191 30.5x12.5x10.5/775x315x260 in/
mmWeightwithAC/DCSafetySwitch 51.2/23.2 54.7/24.7 88.4/40.1 lb/kgCooling NaturalConvection Fans(userreplaceable) Noise <25 <50 dBAMin.-Max.OperatingTemperatureRange -13to+140/-25to+60(CANversion****-40to+60) ˚F/˚C
ProtectionRating NEMA3R*ForotherregionalsettingspleasecontactSolarEdgesupport**Limitedto125%forlocationswheretheyearlyaveragehightemperatureisabove77ºF/25ºCandto135%forlocationswhereitisbelow77ºF/25ºC.Fordetailedinformation,refertohttp://www.solaredge.us/files/pdfs/inverter_dc_oversizing_guide.pdf ***Ahighercurrentsourcemaybeused;theinverterwilllimititsinputcurrenttothevaluesstated.****CANP/NsareeligiblefortheOntarioFITandmicroFIT(microFITexc.SE11400A-US-CAN)
HSL 60 | Poly
Dimensions 1636mm ×988mm ×40 mm
Weight 19±0.5kg
Frame Aluminum-alloy
Front 3.2mm tempered glass with anti reflective coating
Encapsulant EVA
Back Cover Composite sheet
Cell Technology Polycrystalline
Cell Size 156 mm × 156 mm (6 in ×6 in)
Number of Cells (Pieces) 60 (6 × 10)
Junction Box Protection class IP 67; with 3 bypass diodes (or 3 pairs,2 each)
Output Cables Solar cable: 4 mm2; length: 1000 mm
Connector Amphenol H4
Mechanical Characteristics
Electrical Characteristics
Operating Temperature – 40 °C to 85 °C
Hail Safety Impact Velocity 25 mm at 23 m/s
Fire Safety Classification (IEC 61730)
Class C
Static Load Wind / Snow 4000Pa/7000Pa
Storage Temperature – 40 °C to 85 °C
Packaging Configuration 24 pieces per pallet
Loading Capacity (40 ft. HQ Container)
672 pieces
System Design Packaging and Storage
Performance at Low Irradiance:The typical relative change in module efficiency at an irradiance of 200 W/m2
in relation to 1000 W/m2 (both at 25 °C and AM 1.5 spectrum) is less than 5 %.
Nomenclature:HSL 60 Poly: HSL60P6-PB-1-xxxHSL 60 Black Poly: HSL60P6-PB-1-xxxBxxx represents the power class
Electrical Characteristics at Standard Test Conditions (STC)Power Class 235 W 240 W 245 W 250 W 255 W*
Maximum Power (Pmax) 235 W 240 W 245 W 250 W 255 W
Open Circuit Voltage (Voc) 36.7 V 37.0 V 37.4 V 37.7 V 38.0 V
Short Circuit Current (Isc) 8.53 A 8.63 A 8.70 A 8.79 A 8.89 A
Voltage at Maximum Power (Vmpp) 29.2 V 29.6 V 30.1 V 30.4 V 30.8 V
Current at Maximum Power (Impp) 8.05 A 8.11 A 8.15 A 8.23 A 8.29 A
Module Efficiency (%) 14.5 % 14.8 % 15.1 % 15.5 % 15.8 %Pmax, Voc, Isc, Vmpp and Impp tested at Standard Testing Conditions (STC) defined as irradiance of 1000W/m² at AM 1.5 solar spectrum and a temperature of 25±2°C. Module power class have positive power sorting: 0 to +5W. Measurement tolerance: +/- 3% (Pmax)* 255W is only applicable for the module with white back sheet
©Hanwha SolarOne Co., Ltd. Specifications are subject to change without notice, Release: 2013-04-01
Electrical Characteristics at Normal Operating Cell Temperature (NOCT)Power Class 235 W 240 W 245 W 250 W 255 W*
Maximum Power (Pmax) 172 W 175 W 179 W 183 W 186 W
Open Circuit Voltage (Voc) 34.4 V 34.6 V 34.8 V 35.0 V 35.2 V
Short Circuit Current (Isc) 6.89 A 6.97 A 7.05 A 7.13 A 7.22 A
Voltage at Maximum Power (Vmpp) 26.5 V 26.8 V 27.3 V 27.6 V 27.9 V
Current at Maximum Power (Impp) 6.50 A 6.53 A 6.56 A 6.64 A 6.67 A
Module Efficiency (%) 13.3 % 13.5 % 13.8 % 14.2 % 14.4 %Pmax, Voc, Isc, Vmpp and Impp tested at Normal Operating Cell Temperature (NOCT) defined as irradiance of 800W/m²; 20°C; Wind speed 1m/s. Measurement tolerance: +/- 3% (Pmax)*255W is only applicable for the module with white back sheet
Normal Operating Cell
Temperature (NOCT)45°C + / - 3°C
Temperature Coefficients of P - 0.43 % / °C
Temperature Coefficients of V - 0.31 % / °C
Temperature Coefficients of I +0.05%/ °C
Maximum System Voltage 1000 V (IEC)
Series Fuse Rating 15 A
Maximum Reverse CurrentSeries fuserating multipliedby 1.35
Temperature Characteristics Maximum Ratings
Various Irradiance Levels
Five Key FeaturesHighly Bankable: Proven field performance with strong company financials
Industry-Leading Warranty: 12 year workmanship warranty, 25 year linear performance warranty*
Positive Power Sorting: Predictable output of 0 to +5W, in 220, 225, 230, and 235W power bands.
Robust Design: Certified to withstand high snow loads, up to 5400 Pa**.
Made in Ontario: Reliable solar modules that meet domestic content requirements
* Please refer to Hanwha Solar Canada Inc Product Warranty for details.** Please refer to Hanwha Solar Canada Inc module Installation Guide.
HSC-230-ON
Quality and Environmental CertificatesHanwha SolarOne, Hanwha Solar Canada's parent is a vertically integrated manufacturer of photovoltaic modules designed to meet the needs of the global energy consumer.
High reliability, guaranteed quality, and excellent cost-efficiency due to vertically integrated production and control of the supply chain;
Optimization of product performance and manufacturing processes through a strong commitment to research and development;
Global presence throughout Europe, North America, and Asia, offering regional technical and sales support.
About Hanwha Solar
1
2
3
4
5
Made in Ontario, Canada
[email protected] wwww.hanwha-solarone.comwww.hanwhasolarcanada.com
ISO9001 quality standards and ISO 14001 environmental standards
CSA Certified to UL1703/ULC - US and Canada
Five Key Features
1 Highly Bankable: Proven field performance with strong company financials
2 Industry-Leading Warranty: 12 year workmanship warranty, 25 year linear performance warranty*
3 Positive Power Sorting: Predictable output of 0 to+5W
4 Robust Design: Module certified to withstand highsnow loads, up to 5400 Pa**
5 Made in Ontario: Reliable solar modules that meetdomestic content requirements
* Please refer to Hanwha Solar Canada Inc Product Warranty for details.** Please refer to Hanwha Solar Canada Inc module Installation Guide.
Quality and Environmental CertificatesISO9001 quality standards and ISO 14001 environmental standards
IEC 61215 and IEC 61730 Class B certifications
CSA Certified for use in the US and Canada
About Hanwha Solar CanadaHanwha SolarOne, Hanwha Solar Canada's parent is a verticallyintegrated manufacturer of photovoltaic modules designed to meetthe needs of the global energy consumer.
High reliability, guaranteed quality, and excellent cost-efficiency due to vertically integrated production and control of the supply chain;
Optimization of product performance and manufacturing processesthrough a strong commitment to research and development;
Global presence throughout Europe, North America, and Asia, offering regional technical and sales support.
t.
f.
e.
866. 258. 0110
866. 437. 5531
HSC-250-60P
HSL 60 | Poly
Dimensions 1636mm ×988mm ×40 mm
Weight 19±0.5kg
Frame Aluminum-alloy
Front 3.2mm tempered glass with anti reflective coating
Encapsulant EVA
Back Cover Composite sheet
Cell Technology Polycrystalline
Cell Size 156 mm × 156 mm (6 in ×6 in)
Number of Cells (Pieces) 60 (6 × 10)
Junction Box Protection class IP 67; with 3 bypass diodes (or 3 pairs,2 each)
Output Cables Solar cable: 4 mm2; length: 1000 mm
Connector Amphenol H4
Mechanical Characteristics
Electrical Characteristics
Operating Temperature – 40 °C to 85 °C
Hail Safety Impact Velocity 25 mm at 23 m/s
Fire Safety Classification (IEC 61730)
Class C
Static Load Wind / Snow 4000Pa/7000Pa
Storage Temperature – 40 °C to 85 °C
Packaging Configuration 24 pieces per pallet
Loading Capacity (40 ft. HQ Container)
672 pieces
System Design Packaging and Storage
Performance at Low Irradiance:The typical relative change in module efficiency at an irradiance of 200 W/m2
in relation to 1000 W/m2 (both at 25 °C and AM 1.5 spectrum) is less than 5 %.
Nomenclature:HSL 60 Poly: HSL60P6-PB-1-xxxHSL 60 Black Poly: HSL60P6-PB-1-xxxBxxx represents the power class
Electrical Characteristics at Standard Test Conditions (STC)Power Class 235 W 240 W 245 W 250 W 255 W*
Maximum Power (Pmax) 235 W 240 W 245 W 250 W 255 W
Open Circuit Voltage (Voc) 36.7 V 37.0 V 37.4 V 37.7 V 38.0 V
Short Circuit Current (Isc) 8.53 A 8.63 A 8.70 A 8.79 A 8.89 A
Voltage at Maximum Power (Vmpp) 29.2 V 29.6 V 30.1 V 30.4 V 30.8 V
Current at Maximum Power (Impp) 8.05 A 8.11 A 8.15 A 8.23 A 8.29 A
Module Efficiency (%) 14.5 % 14.8 % 15.1 % 15.5 % 15.8 %Pmax, Voc, Isc, Vmpp and Impp tested at Standard Testing Conditions (STC) defined as irradiance of 1000W/m² at AM 1.5 solar spectrum and a temperature of 25±2°C. Module power class have positive power sorting: 0 to +5W. Measurement tolerance: +/- 3% (Pmax)* 255W is only applicable for the module with white back sheet
©Hanwha SolarOne Co., Ltd. Specifications are subject to change without notice, Release: 2013-04-01
Electrical Characteristics at Normal Operating Cell Temperature (NOCT)Power Class 235 W 240 W 245 W 250 W 255 W*
Maximum Power (Pmax) 172 W 175 W 179 W 183 W 186 W
Open Circuit Voltage (Voc) 34.4 V 34.6 V 34.8 V 35.0 V 35.2 V
Short Circuit Current (Isc) 6.89 A 6.97 A 7.05 A 7.13 A 7.22 A
Voltage at Maximum Power (Vmpp) 26.5 V 26.8 V 27.3 V 27.6 V 27.9 V
Current at Maximum Power (Impp) 6.50 A 6.53 A 6.56 A 6.64 A 6.67 A
Module Efficiency (%) 13.3 % 13.5 % 13.8 % 14.2 % 14.4 %Pmax, Voc, Isc, Vmpp and Impp tested at Normal Operating Cell Temperature (NOCT) defined as irradiance of 800W/m²; 20°C; Wind speed 1m/s. Measurement tolerance: +/- 3% (Pmax)*255W is only applicable for the module with white back sheet
Normal Operating Cell
Temperature (NOCT)45°C + / - 3°C
Temperature Coefficients of P - 0.43 % / °C
Temperature Coefficients of V - 0.31 % / °C
Temperature Coefficients of I +0.05%/ °C
Maximum System Voltage 1000 V (IEC)
Series Fuse Rating 15 A
Maximum Reverse CurrentSeries fuserating multipliedby 1.35
Temperature Characteristics Maximum Ratings
Various Irradiance Levels
HSL 60 | Poly
Dimensions 1636mm ×988mm ×40 mm
Weight 19±0.5kg
Frame Aluminum-alloy
Front 3.2mm tempered glass with anti reflective coating
Encapsulant EVA
Back Cover Composite sheet
Cell Technology Polycrystalline
Cell Size 156 mm × 156 mm (6 in ×6 in)
Number of Cells (Pieces) 60 (6 × 10)
Junction Box Protection class IP 67; with 3 bypass diodes (or 3 pairs,2 each)
Output Cables Solar cable: 4 mm2; length: 1000 mm
Connector Amphenol H4
Mechanical Characteristics
Electrical Characteristics
Operating Temperature – 40 °C to 85 °C
Hail Safety Impact Velocity 25 mm at 23 m/s
Fire Safety Classification (IEC 61730)
Class C
Static Load Wind / Snow 4000Pa/7000Pa
Storage Temperature – 40 °C to 85 °C
Packaging Configuration 24 pieces per pallet
Loading Capacity (40 ft. HQ Container)
672 pieces
System Design Packaging and Storage
Performance at Low Irradiance:The typical relative change in module efficiency at an irradiance of 200 W/m2
in relation to 1000 W/m2 (both at 25 °C and AM 1.5 spectrum) is less than 5 %.
Nomenclature:HSL 60 Poly: HSL60P6-PB-1-xxxHSL 60 Black Poly: HSL60P6-PB-1-xxxBxxx represents the power class
Electrical Characteristics at Standard Test Conditions (STC)Power Class 235 W 240 W 245 W 250 W 255 W*
Maximum Power (Pmax) 235 W 240 W 245 W 250 W 255 W
Open Circuit Voltage (Voc) 36.7 V 37.0 V 37.4 V 37.7 V 38.0 V
Short Circuit Current (Isc) 8.53 A 8.63 A 8.70 A 8.79 A 8.89 A
Voltage at Maximum Power (Vmpp) 29.2 V 29.6 V 30.1 V 30.4 V 30.8 V
Current at Maximum Power (Impp) 8.05 A 8.11 A 8.15 A 8.23 A 8.29 A
Module Efficiency (%) 14.5 % 14.8 % 15.1 % 15.5 % 15.8 %Pmax, Voc, Isc, Vmpp and Impp tested at Standard Testing Conditions (STC) defined as irradiance of 1000W/m² at AM 1.5 solar spectrum and a temperature of 25±2°C. Module power class have positive power sorting: 0 to +5W. Measurement tolerance: +/- 3% (Pmax)* 255W is only applicable for the module with white back sheet
©Hanwha SolarOne Co., Ltd. Specifications are subject to change without notice, Release: 2013-04-01
Electrical Characteristics at Normal Operating Cell Temperature (NOCT)Power Class 235 W 240 W 245 W 250 W 255 W*
Maximum Power (Pmax) 172 W 175 W 179 W 183 W 186 W
Open Circuit Voltage (Voc) 34.4 V 34.6 V 34.8 V 35.0 V 35.2 V
Short Circuit Current (Isc) 6.89 A 6.97 A 7.05 A 7.13 A 7.22 A
Voltage at Maximum Power (Vmpp) 26.5 V 26.8 V 27.3 V 27.6 V 27.9 V
Current at Maximum Power (Impp) 6.50 A 6.53 A 6.56 A 6.64 A 6.67 A
Module Efficiency (%) 13.3 % 13.5 % 13.8 % 14.2 % 14.4 %Pmax, Voc, Isc, Vmpp and Impp tested at Normal Operating Cell Temperature (NOCT) defined as irradiance of 800W/m²; 20°C; Wind speed 1m/s. Measurement tolerance: +/- 3% (Pmax)*255W is only applicable for the module with white back sheet
Normal Operating Cell
Temperature (NOCT)45°C + / - 3°C
Temperature Coefficients of P - 0.43 % / °C
Temperature Coefficients of V - 0.31 % / °C
Temperature Coefficients of I +0.05%/ °C
Maximum System Voltage 1000 V (IEC)
Series Fuse Rating 15 A
Maximum Reverse CurrentSeries fuserating multipliedby 1.35
Temperature Characteristics Maximum Ratings
Various Irradiance Levels
HSL 60 | Poly UL
Dimensions 1636mm ×988mm ×40 mm
Weight 19±0.5kg
Frame Aluminum alloy, available in silver or black finish
Front Tempered glass
Encapsulant EVA
Back Cover White or black back sheet
Cell Technology Polycrystalline (Taiwan)
Cell Size 156 mm × 156 mm (6 in ×6 in)
Number of Cells (Pieces) 60 (6 × 10)
Junction Box Protection class IP67 with bypass-diode
Output Cables Solar cable: 4 mm2; length: 1000 mm
Connector Amphenol H4
Mechanical Characteristics
Electrical Characteristics
Operating Temperature – 40 °C to 85 °C
Hail Safety Impact Velocity 25 mm at 23 m/s
Fire Safety Classification (IEC 61730)
Class C
Static Load Wind / Snow 4000Pa/7000Pa
Storage Temperature – 40 °C to 85 °C
Packaging Configuration 24 pieces per pallet
Loading Capacity (40 ft. HQ Container)
672 pieces
System Design Packaging and Storage
Performance at Low Irradiance:The typical efficiency at 200 W/m² in relation to 1000 W/m², (25°C, AM 1.5) is at least 96 % of STC efficiency.
Electrical Characteristics at Standard Test Conditions (STC)Power Class 235 W 240 W 245 W 250 W 255 W
Maximum Power (Pmax) 235 W 240 W 245 W 250 W 255 W
Open Circuit Voltage (Voc) 36.8 V 37.1 V 37.2 V 37.4 V 37.5 V
Short Circuit Current (Isc) 8.65 A 8.75 A 8.80 A 8.89 A 8.95 A
Voltage at Maximum Power (Vmpp) 29.1 V 29.5 V 29.7 V 30.0 V 30.1 V
Current at Maximum Power (Impp) 8.08 A 8.14 A 8.25 A 8.34 A 8.48 A
Module Efficiency (%) 14.5 % 14.8 % 15.2 % 15.5 % 15.8 %
Pmax, Voc, Isc, Vmpp and Impp tested at Standard Testing Conditions (STC) defined as irradiance of 1000W/m² at AM 1.5 solar spectrum and a temperature of 25±2°C. Module power class have positive power sorting: 0 to +5W. Measurement tolerance: +/- 3% (Pmax)
©Hanwha SolarOne Co., Ltd. Specifications are subject to change without notice, Release: 2013-09-01
Electrical Characteristics at Normal Operating Cell Temperature (NOCT)Power Class 235 W 240 W 245 W 250 W 255 W
Maximum Power (Pmax) 170 W 174 W 178 W 181 W 185 W
Open Circuit Voltage (Voc) 34.2 V 34.5 V 34.6 V 34.8 V 34.9 V
Short Circuit Current (Isc) 6.98 A 7.07 A 7.11 A 7.18 A 7.23 A
Voltage at Maximum Power (Vmpp) 26.3 V 26.7 V 26.9 V 27.1 V 27.2 V
Current at Maximum Power (Impp) 6.47 A 6.52 A 6.62 A 6.68 A 6.81 A
Module Efficiency (%) 13.1 % 13.5 % 13.8 % 14.0 % 14.3 %
Pmax, Voc, Isc, Vmpp and Impp tested at Normal Operating Cell Temperature (NOCT) defined as irradiance of 800W/m²; 20°C; Wind speed 1m/s. Measurement tolerance: +/- 3% (Pmax)
Normal Operating Cell
Temperature (NOCT)45°C + / - 3°C
Temperature Coefficients of P - 0.43 % / °C
Temperature Coefficients of V - 0.32 % / °C
Temperature Coefficients of I +0.05%/ °C
Maximum System Voltage 600V or 1000 V (UL)
Series Fuse Rating 15 A
Maximum Reverse CurrentSeries fuserating multipliedby 1.35
Temperature Characteristics Maximum Ratings
Various Irradiance Levels
Nomenclature:eg. HSL60P6-PB-0-245TW
HSL60P6-PB- -xxx
0 600V (UL) T Silver / White
4 1000V (UL) TW Black / White
TB Black / Black
xxx represents the power class
HSL 60 | Poly UL
Dimensions 1636mm ×988mm ×40 mm
Weight 19±0.5kg
Frame Aluminum alloy, available in silver or black finish
Front Tempered glass
Encapsulant EVA
Back Cover White or black back sheet
Cell Technology Polycrystalline (Taiwan)
Cell Size 156 mm × 156 mm (6 in ×6 in)
Number of Cells (Pieces) 60 (6 × 10)
Junction Box Protection class IP67 with bypass-diode
Output Cables Solar cable: 4 mm2; length: 1000 mm
Connector Amphenol H4
Mechanical Characteristics
Electrical Characteristics
Operating Temperature – 40 °C to 85 °C
Hail Safety Impact Velocity 25 mm at 23 m/s
Fire Safety Classification (IEC 61730)
Class C
Static Load Wind / Snow 4000Pa/7000Pa
Storage Temperature – 40 °C to 85 °C
Packaging Configuration 24 pieces per pallet
Loading Capacity (40 ft. HQ Container)
672 pieces
System Design Packaging and Storage
Performance at Low Irradiance:The typical efficiency at 200 W/m² in relation to 1000 W/m², (25°C, AM 1.5) is at least 96 % of STC efficiency.
Electrical Characteristics at Standard Test Conditions (STC)Power Class 235 W 240 W 245 W 250 W 255 W
Maximum Power (Pmax) 235 W 240 W 245 W 250 W 255 W
Open Circuit Voltage (Voc) 36.8 V 37.1 V 37.2 V 37.4 V 37.5 V
Short Circuit Current (Isc) 8.65 A 8.75 A 8.80 A 8.89 A 8.95 A
Voltage at Maximum Power (Vmpp) 29.1 V 29.5 V 29.7 V 30.0 V 30.1 V
Current at Maximum Power (Impp) 8.08 A 8.14 A 8.25 A 8.34 A 8.48 A
Module Efficiency (%) 14.5 % 14.8 % 15.2 % 15.5 % 15.8 %
Pmax, Voc, Isc, Vmpp and Impp tested at Standard Testing Conditions (STC) defined as irradiance of 1000W/m² at AM 1.5 solar spectrum and a temperature of 25±2°C. Module power class have positive power sorting: 0 to +5W. Measurement tolerance: +/- 3% (Pmax)
©Hanwha SolarOne Co., Ltd. Specifications are subject to change without notice, Release: 2013-09-01
Electrical Characteristics at Normal Operating Cell Temperature (NOCT)Power Class 235 W 240 W 245 W 250 W 255 W
Maximum Power (Pmax) 170 W 174 W 178 W 181 W 185 W
Open Circuit Voltage (Voc) 34.2 V 34.5 V 34.6 V 34.8 V 34.9 V
Short Circuit Current (Isc) 6.98 A 7.07 A 7.11 A 7.18 A 7.23 A
Voltage at Maximum Power (Vmpp) 26.3 V 26.7 V 26.9 V 27.1 V 27.2 V
Current at Maximum Power (Impp) 6.47 A 6.52 A 6.62 A 6.68 A 6.81 A
Module Efficiency (%) 13.1 % 13.5 % 13.8 % 14.0 % 14.3 %
Pmax, Voc, Isc, Vmpp and Impp tested at Normal Operating Cell Temperature (NOCT) defined as irradiance of 800W/m²; 20°C; Wind speed 1m/s. Measurement tolerance: +/- 3% (Pmax)
Normal Operating Cell
Temperature (NOCT)45°C + / - 3°C
Temperature Coefficients of P - 0.43 % / °C
Temperature Coefficients of V - 0.32 % / °C
Temperature Coefficients of I +0.05%/ °C
Maximum System Voltage 600V or 1000 V (UL)
Series Fuse Rating 15 A
Maximum Reverse CurrentSeries fuserating multipliedby 1.35
Temperature Characteristics Maximum Ratings
Various Irradiance Levels
Nomenclature:eg. HSL60P6-PB-0-245TW
HSL60P6-PB- -xxx
0 600V (UL) T Silver / White
4 1000V (UL) TW Black / White
TB Black / Black
xxx represents the power class