ENGINEERING SERVICES PVT. LTD.

HEAVY CARGO LIFTERS MOVERS & ERECTION

Handling of Heavy Projects Works, Dismantling & Erection of heavy

machinery, & Forging Hammers & Press erection specialists . Store handling

systems, Transportation & Industrial Manpower & Rigging work.

Sangameshwar

We undertakes the following work:

• Handling of Heavy Machinery.

• Heavy Power & Forgings Project works.

• Dismantling, Erection & Assembly of Heavy

Machinery, Packers & Plant Movers .

• Loading And Unloading of Heavy Machinery.

• Store Handling System & Managements.

• Industrial Manpower .

• We have a specialty in Forging Sectors regarding

handling their heavy press & hammers for new

Installation or maintenance.

• Mechanical & Hydraulic Crane & Trailors Suppliers.

HAVE A LOOK AT OUR GREAT ACHIEVEMENTS

ALL WORK DONE MANUALLY.

ALL THE JOBS ARE HEAVY CARGO.

In 2011

VARROC ENGGINEERING PVT LTD. (PLANT VIII)

Walunj MIDC Aurangabad

Erection & commissioning of 8000 T forging Press.

Installation of 8000 T ATO

forging press at “ varroc

engg. Pvt. Ltd. (Aurangabad)”

Total Assembled Weight: 850

MT

Bed: 110 MT

Column: 60 Mt each (2 Nos.)

Tierods: 17 MT each (4 nos.)

Ram: 75 MT

Tie Plate: 45 MT

Crank Shaft: 38 MT

Fly Wheel: 36 MT

Shifting & Tossing & erection of bed on foundation.

We use 150MT capacity crane for Installation of Tierods (4 nos.),

columns (2nos.), Ram

ATO 8000 T Forging

press ready for

electrical work.

In 1993,

Unloading, shifting. Erection & Complete Installation of

2500 T Russian Forging Press

2500 T German Forging Press

1250 T Russian Forging Press

1600 T Sharing Machine

6 T Russian numatic Hammer

At Pradip Metal Ltd.

Navi Mumbai

2500 T Russian Forging Press 400 T Trimming Press

M/s Paramount Forge 32/11,32/5,32/4b,

Village Bhamni, Talika Khalapur,

Raigad Dist. Maharashtra India.

Installation of 3500 T Forging Hydraulic press at PARAMOUNT FORGE Khopoli. (2010)

Its Total Weight is 500 MT .

Bed: 110 MT

Crown: 145 MT (With Pistons 4Nos.

Moving Ram: 80 MT

Columns: 27 Mt Each ( 2 nos. )

Tie Rods: 14 MT. each (4 Nos.)

Pipeline & other Accessories weighted 50 MT

Crown (without pistons wt: 105MT)

was easy because pistons were not

installed . But it has to be lifted 18

feet up for installation of tie rods &

pistons.

Bed Erection was Little bit risky

110 MT has to be placed on

foundation which was deep around

3mtr.

Tie rods (14 Mt each ) were

installed for to maintained the

load balance.

Lifting of crown started

with 5 hydraulic jacks

(cap. 50 T). In 7 days the

desired height (18 ft.)

reach. But we want to

installed pistons at

(15ft.).

4 Nos. of pistons were installed at the height of 15 ft. Each wt. 11 MT.

After installing the pistons cown will be weighted 145 MT.

Erection of ram (80 MT) should be placed between crown and bed.

Tie rods should be lifted up at 33 meter height to install columns. And

again downed to connect columns', bed & crown together.

Installation of 3500 T Chinese hydraulic prees completed in

60 days.

Installation of D-53K 3500 CNC Ring Rolling Machine

MAHINDRA UGINE STEEL CO. LTD.

Village Kanhe, Pune-Mumbai Road, Tal: Maval

Dist: Pune Maharashtra India.

• Installation of 1000 T Russian press at Mahindra Stampings (Kanhe ). (2010)

• Its weighted 475 MT .

• Bed: 85 MT

• Crown: 130 MT (With Gears 4 Nos.)

• Moving Ram: 80 MT

• Columns: 25 Mt Each ( 2 nos. )

• Tie Rods: 6 MT. each (4 Nos.)

• Pipeline & other Accessories weighted 60 MT

Crown (without gear wt: 90 MT) After fixing gears with the crown its wt. will be 130 MT. And it has to be lifted 22 Ft. upward to install columns.

•Bed Erection was easy 85 MT has to be placed on foundation which was deep around 4 mtr.

• 4 nos of gears to be installed with the crown and lifted 22

ft. up for erection of columns.

•Crown lifted 22 ft height

within 6 days by our

Hydraulic jacking system

•Columns erection donenow its time to fixed them with crown and bed by tie rods.

•Tie rod erection with

column, bed & crown

• Erection of column. Bed, crown

& tie rod completed.

Moving Ram Installation with 1000 T press.

Installation of 1000 T

Russian mechanical

stamping press

erection/Installation

done within 30 days.

Shree Ganesh Forging Ltd.T.T.C. Indl. Area Navi Mumbai.

Smeral Forging press line Erection.

Press shop erection at Shree Ganesh Forgings Ltd.

Navi Mumbai.

Smeral 4000 T & Smeral

2500 Forging press

installation at Shree

Ganesh Forgings Ltd.

Navi Mumbai.

50 meter. Shifting of a Pier Leg

Of A Goliath Crane At Pipavav

Shipyard Pipavav, Gujarat.

(2010)

Its Size Details:

Length: 78 MTR.

Width: 50 MTR.

Weight: 750 Metric

Ton

i.e 7,50,000 KG

At

Press removed out of

foundation in 3 days &

Installed on Foundation

in 3 days.

We also work in Electricity & power project with

reputed & famous Govt. & Pvt. Companies

All the achivements were not possible without our

workmen & foreman.

For Any Enquiry please contact

SangameshwarEngineering Services Pvt. Ltd

Chinchwad Pune

Mr. B.S.Muley +919960866234

Mr. P.B.Muley +919860099326

Email: pbmuley@sespune.com

Web Site: www.sespune.webs.com