introduction to group
TRANSCRIPT
Introduction to group
Marko Vučković
Where do I come from?
Zaječar - City center
The river Black Timok
“Felix Romuliana”
Model of Roman architecture Felix Romuliana
It was commissioned by Emperor Gaius Valerius Galerius Maximianus, in the late 3rd and early 4th centuries.
The view from the main gate
Estern part of Felix Romuliana
I finished elementary and high school in Zajecar and the Faculty of Electronic Engineering in Nis on department of automatic control 2007.
Faculty of Electronic Engineering in Niš
During my studies I was interested in many things concerning programming as well as Ethernet and wireless technologies.
Also I have been evolved in preparing the lecture book for Control Process course also in many laboratory activities.
Working on Festo, Omron, Allen-Bradley PLC
Clip was made in Technical school laboratory
Working on Temperature Controllers
Robot programming (Mitsubishi Industrial Robot RV-2AJ)
Clip was made in Technical school laboratory
Working knowledge of various programming languages:
(C, C++, C#, LabView, MatLab)
From May 2008. – Sep. 2009 I was working on EU project: ''RADDOS – Joint research on various types of radiation dosimeters''
MG and CP circuit configuration for three-pin MOSFETs
The midgap-subthreshold (MG) technique for the determination of densities of traps created in the gate oxide (fixed traps) (FT) and close to the oxide/supstrate interface (SiO2/Si) interface (slow switching traps) (SST).
The charge pumping (CP) technique for the determination of the trap density at the SiO2/Si interface (fast switching traps) (FST).
C# program for measuring transfer characteristic of MOSFETs
During March 2009. – June 2009. I was working at Jožef Stefan Institute, Ljubljana, Slovenia on for the automatisation of a 3D-TCT set up and its adaptation for RAD FET measurements. 3D-TCT is a novel technique for semiconductor detector characterization pioneered at J. Stefan Institute. My work included software and hardware integration of a relatively complicated multichannel measurement set-up.
3D-TCT setup
I was working as Teaching fellow in information technology and electronics-oriented subjects as well as robotics science and PLC
TRANSMIT - Training Research and Applications Network to Support the Mitigation of Ionospheric Threats
Characterisation of effects on future GNSS systems (new Galileo and modernized GPS signals)
TRANSMIT project
TRANSMIT Summer School
“Underlying causes of ionospheric effects on radio wave propagation”
and SB Meeting Konstancin - Jeziorna by Warsaw, 19 – 23 September 2011
Summer school program: Introduction to GNSS New GNSS Signals and Systems GNSS receivers GNSS and the Ionosphere Space Weather Climatology of Scintillation Theories of Ionospheric Scintillation Scintillation Data Analysis GNSS Scintillation Receivers and Monitoring
Networks
EISCAT mission in Kiruna
32m UHF antenna, Kiruna
Kiruna:EISDEV terminal
Some of the transmited power will be returned from the ionosphere.
A nice spectrum from the ionosphere.
The RTG (real time graph) displays
Program for analysing the data
My future plans Goal
Modeling ionospheric scintilations Building an antenna and making setup for
polarimeter (ETTUS bords) Spirent, UK
My web page: http://sabotin.ung.si/~mv0029/
Thanks for listening