introduction of smh
TRANSCRIPT
www.smh.co.kr www.smh.co.kr
S-Material Handling Co., Ltd.
For
Material Handling
Equipment
Introduction of SMH
[2020]
Since July 2007,
www.smh.co.kr
Table of Contents
I. Corporation Overview
II. Business Area
III. Engineering – Softwares, R&D, Patents & References
IV. Manufacturing
V. Sea-Transportation
Ⅵ. Track Record
Ⅶ. Appendix – Cerificates, News & CSR
VI. Site Erection & Commissioning
VII. Track Record with Photos
Appendix – Cerificates, News & CSR
VIII. Certificates
Appendix – Corporate News, CSR & Facilities,
www.smh.co.kr
I. Corporation Overview
Background
SMH had been established in accordance with the laws of the Republic of Korea in 2007 by being SEPARATED from Samsung Heavy Industries Co. Ltd. with succession of all supply record & technology in their Material Handling Equipment Business Sector (MHE Business Sector).
Since founded in 2007, SMH has been active hard enough to be the World’s Best MHE Supplier and growing-up as one of Korea's Foremost Company in the supply of all kinds of material handling equipment.
Today, SMH specializes in Engineering, Manufacturing, Erection, Commissioning, After-Sales Service and Repair/Renovation/Replacing/Upgrading Works for the equipment of the leading Coal-Fired Power Plants, Steel Mills, Container/Bulk Terminals and General Cargo Handling Facilities over the world.
Especially SMH has been proven in its excellent technology and best quality in the material handling equipment business through the past successful experiences by the qualified engineers having been in charge of this area over 25 years.
www.smh.co.kr
I. Corporation Overview
Corporate Profile
Established July 11th 2007 (by spun off from Samsung Heavy Industries Co., Ltd.)
President & CEO Jang-Young Chung / Ph.D. in Engineering
Address
[Head Office] 501, Dream Bldg., Changwon TechnoValley, Sogye-ro 12 (Paryong-dong 215), Uichang-gu, Changwon-si, Gyeongsangnam-do, Korea Tel. : 82-55-289-6455, 6456, Fax. : 82-55-289-6457
[Seoul Office] 411, 6th Byucksan Digitalvalley, Gasan-dong, Geumcheon-gu, Seoul, 153-803, Korea
[Factory] Masan New Port, Changwon,si, Gyeongsangnam-do, Korea
[Factory_SMHC] Gasan-ro 96, Jinyeong-eup, Kimhae-si, Gyeongsangnam-do, Korea
Authorized Capital 1,000 Million KRW (USD 1,000,000)
Products (Major Activities)
Harbor Crane, Bulk Material Handling Machine, Shipyard machine etc. (Design/Fabrication/Installation/Erection/Commissioning based on EPC)
SMH’s Goal is to become a World’s Best MHE Supplier through the highest grade of service based on Our Own High-Technology and Best-Quality Management.
www.smh.co.kr
I. Corporation Overview
Brief History of SMH (since the year of 2007)
2007.07.11 •SMH had been established for MHE Business by spun off from SHI.
2007.07.19 • Conclude the Cooperation Agreement with TRF (Subsidiary Company of TATA Group in India)
2007.09.28 • Acquire “ISO9001: 2000 Certificate” by BSI
2008.01.08 • Open the 2nd Plant (Jingyoung-eup, Kimhae-si, Gyeongsangnam-do)
2008.03.14 • Authorized as the “Maintenance Company by Korea Western Power Co.”
2008.03.28 • Registered as the “Venture Corporation”
2008.04.01 • Licensed for “Korea Mechanical Construction Business”
2009.06.29 • Authorized as the “Maintenance Company by Korea South East Power Co.”
2009.07.01 • Authorized to establish the R&D Center by Korea Industrial Tech. Association
2009.11.30 • Awarded the “Minister of Knowledge Economy Prize” • Awarded the “1 Million Dollar Tower of Export Prize”
2010.03.12 • Conclude the Iran Agency Agreement
2010.06.08 • Open the Seoul Branch
www.smh.co.kr
I. Corporation Overview
2010.11.16 • Authorized as the “Stacker/Reclaimer Sourcing Group by Poscoenc”
2010.11.30 • Awarded the “3 Million Dollar Tower of Export Prize”
2011.01.12 • Registered for the “INNO-BIZ”
2011.07.14 • Awarded the “Great Place to Work”
2012.12.11 • Awarded the “5 Million Dollar Tower of Export Prize”
2013.04.16 • Conclude the Business Alliance between HAMADA Heavy Ind. (Japan)
2013.08.16 • Conclude the Philippines Agency Agreement
2013.10.10 • Awarded the “2013 ASPA(Asian Science Park Association) Excellence Prize”
2014.11.27 • Awarded the “Prime Minister Citation of Vitalizing Venture”
2015.04.21 • Participate in the WETEX Exhibition In Dubai
2016.01.15 • Awarded the “Enterprises Management Awards” (Bulk Material Handling Machine)
2016.03.07 • Open the Vietnam Office in Hanoi
Brief History of SMH (since the year of 2007)
www.smh.co.kr
I. Corporation Overview
2016.11.05 • Participate in the International Electricity Exhibition(IEE) In Iran
2018.02.01 • Conclude the Technical and Sales Cooperation Agreement with Claudius Peters Technologies SAS (CPTSAS) for Portal Type Reclaimer
2018.03.05 • Designated as the “Exemplary Taxpayer” from the Director of National Tax Service
2018.05.18 • Licensed for “Korea Electrical Construction Business”
2018.10.24 • Awarded the “Technological Innovation" from Minister of Ministry of SMEs and Startups
2019.07.24 • Demag has appointed SMH as a Korean sales partner.
2019.12.19 • Acquire “NET: New Excellent Technology” by Ministry of Trade, Industry and Energy of Korea.
Brief History of SMH (since the year of 2007)
www.smh.co.kr
I. Corporation Overview
[Billion KRW]
Corporate Sales Revenue & Credit Rating (as of April 2020)
Credit Rating : BBB
Cash Flow Grade : CR-2
www.smh.co.kr
I. Corporation Overview
Organization Chart Jang-Young Chung President & CEO
Ph.D. in Engineering
Sales
J. S. Song
Director
Division CEO Admin. Sales Engineering
QA/OS PM R&D Total Mech. E&I
Man Power 1
(Ph.D.) 2
(MBA. 1)
5 (M.Sc. 2)
10 (M.Sc. 3)
4
4
(M.Sc. 1)
2
4 (Ph.D. 1)
(M.Sc. 2)
32
Man Power
Administration
N.Y. Kim
Director
E-mail : [email protected]
Mech. Engineering
Team 1 & 2 E & I
Engineering QA/OS PM R&D
Y. H. Park
Director
G.C. Cho
Director H.S. Kim
G.M
C.H. Hahm
Director K.Y. Kim
G.M
E-mail : [email protected]
www.smh.co.kr
II. Business Area
Product Lines
Quay Side Facilities
Bulk Material Handling
• Continuous Ship Unloader
(CSU)
• Grab Type Ship-Unloader
(GTSU)
• Ship Loader(SL)
General Cargo Handling
• Bridge Type Crane(BTC)
Plant Yard Facilities Utility Facilities
Yard Machine
• Stack/Reclaimer
• Stacker
• Reclaimer
• Blending Reclaimer
Belt Conveyor (BC)
• Jetty and Yard BC
• Long Distance Belt Conveyor
Slag Handling Facility
Crushing & Screening
Car Dumping Facility
Yard Water Treatment System
• Water Spray/Drainage
• Foul Water Treatment
Environmental Facility
• Dust Collector
• Dust Suppression System
Goliath Crane
(Kone & Sumitomo model)
LLC
(Sumitomo & TRF model)
Ship Yard Facilities
www.smh.co.kr
II. Business Area
Demag Hoist & Cranes
www.smh.co.kr
II. Business Area
Mini Dozer
Specification - Weight : 1130kg - Dimension(mm) : W950xL2780xH675 - Travelling Speed : 22m/min - Lifting Capacity : 250kg - Operating : Remote Control
www.smh.co.kr
II. Business Area
Ceramic Ball Grooved Pulley
[installation ‘17.6] [After 1Year‘18.6] [After 2.5 Year ‘19.12]
Paitent NET
www.smh.co.kr
Major Activities
Engineering
Basic Design
• Feasibility Study
• Loading Capacity Cal.
• Material Balance Analysis
• Yard Stock Volume Cal.
• Lay-out Design
• Equipment Sizing
• PID & PFD
• E & I Data Sheet
• Control System
Detail Design
• Local Analysis
• Detail Design
• Fabrication Drawing
• Construction Drawing
• Purchasing Spec.
• Manufacturing Procedure
• Fab. & Assembly Manual
• Commissioning Manual
• Operating Manual
Project Management Fabrication & Construction
Project Control
• Planning (Schedule)
• Cost Control
• Delivery Control
• M’tl & Document Control
Coordination
• Internal Divisions
• Engineering/Fabrication/
Erection/Commissioning
• Purchasing Partners
Maintenance & A/S
• Customer Service
• Structural Fabrication
(With Cooperative Comp.)
• Machining Items
• Mechanical & Electrical
Equipment
• Piping & Acc’ y
• Construction & Erection
• Fabrication & Machining
• Sub-Acc’y & Assembly
• Construction & Erection
• Commissioning &
Commercial Operating
• Performance Management
Supervision & Consulting
Quality Management
• Quality Assurance
• QA/QC Manual (ITP & QIP)
according to ISO9001
II. Business Area
www.smh.co.kr
III. Engineering - Software
NAME DEVELOPER VERSION USAGE
Autocad Autodesk 2009, 2010, 2014, 2016 Drawing
Microstation Bently Powerdraft Drawing
Solid edge Siemens PLM Software ST2 3D Modeling
Staad Pro Bentley Systems, lnc. V8i 20.07.06.23 Main Structure Analysis
GT Strudl Georgia Institute of
Technology GT Strudl 29 Main Structure Analysis
Midas Gen Midas IT Gen 2017 Main Structure Analysis
Nastran NFX Midas IT 2014 FEM Analysis
MD Nastran Midas IT 2007r3 Transient Response Analysis for Seismic Action Analysis
Ansys (Structure, CFD)
ANSYS 2018 FEM Analysis
Matlab MathWorks 2013 Numerical Analysis
Mathcad PTC 14 Basic Calculation
Microsoft Office
Microsoft
2007 2010
Basic Calculation <Mechanical> - Capacity & Motor Power Cal. - Wheel Load & Stability Cal. <Electrical> - Short Circuit Current Cal. - Cable Sizing
www.smh.co.kr
III. Engineering - Software (Inhouse)
Plate Buckling Analysis (DIN 4114)
Pulley Calculation & Autocad Drawing
www.smh.co.kr
<Result of Simulation> <Implementation of Optimization of Drive Torque>
Long Distance Belt Tension Simulation
Motor Power & Mechanical Calculation (CEMA 7th, JIS B 8805, ISO 5048)
III. Engineering - Software (Inhouse)
www.smh.co.kr
CODE/STANDARD TITLE USAGE
JIS
B 8821 Calculation Standards for Steel Structures of Cranes
CSU, GTSU, ST/RE, S/L
B 8830 Wind Load Assessment
B 8831 Design Principles for Loads and Load Combinations
JSME Japan Society Mechanical Engineers
FEM
Section I Rules for the Design of Hoisting Appliances C/C, Goliath Crane
Section II Rules for the Design of Mobile Equipment for Continuous Handling of Bulk Materials
CSU, GTSU, ST/RE, S/L
IBC 2015 International Building Code Tower, Gallery, Trestle
UBC 1997 Uniform Building Code CSU, GTSU, ST/RE, S/L Tower, Gallery, Trestle
CEMA 7th Belt Conveyors for Bulk Materials Belt Conveyor Power & Tension
JIS B 8805 Rubber Belt Conveyors with Carrying Idlers- Calculation of Operating Power and Tensile Forces
Belt Conveyor Power & Tension
Chilean Std.
EQCO Seismic Design Criteria for Equipment (by Earthquake Engineering Consultants)
Seismic Design in Chilean Equipment Project
III. Engineering - Code Application
www.smh.co.kr
Mobile Harbor Crane Scraper Type Reclaimer
III. Engineering - R&D
Automatic Container Terminal
www.smh.co.kr
Greater Wear Resistence (Longer Life Time)
Superior Friction Factor (To reduce Belt Slip)
Economic Belt Sizing
Easy Shedding of Accumulated
Slurry Material and Water (Self-Cleaning of Pulley)
Enhancement of Belt Tracking
Ceramic Ball Groove Pulley Removable Impact & Slide Bar
Easy Checking Wear (2 color Weal Plate)
Easy Maintenance (Slide type)
Low Replacement Rate (Slide plate Replacement)
Prevention of Spillage
III. Engineering - R&D & Patent
www.smh.co.kr
Traverser being able to move on Curved Rail
Pitching Tensioner Apparatus
Korea : 10-0940538 (2010)
Korea : 10-1145253 (2012)
III. Engineering - Patent
www.smh.co.kr
Shifting Device of Hoisting
Guide Sheave
Bucket Ass’y of Reclaimer
Korea : 10-
1145254 (2012)
Korea : 10-
1342531 (2013)
III. Engineering - Patent
Digging Device of Continuous Ship Unloader
Bucket Ass’y of Continuous Ship Unloader
Korea : 10-
1357796 (2014)
Korea : 20-
0472262 (2014)
www.smh.co.kr
Device for Controlling Container Sway
Testing Device for Long Pitch type Roller Chain Assembly
Korea : 10-1553822 (2015)
Korea : 10-1631693 (2016)
10-1647333 (2016)
III. Engineering - Patent
www.smh.co.kr
Rotary Feeder of Bucket Elevator Type Continuous Ship Unloader
Skirt Apparatus for Belt Conveyor
Korea : 10-1675953 (2016)
Korea : 10-1680040 (2016)
III. Engineering - Patent
www.smh.co.kr
ANGAMOS(CHILE) 1500t/h Stacker Dynamic Analysis (2009) Code : FEM II, UBC, Chilean code Software : MD Nastran , Patran (pre/post process)
III. Engineering - Reference
www.smh.co.kr
POSCO 1500t/h Blending Reclaimer Analysis (2009) Code : KBC, JIS B 8821, 8830, 8831, FEM II Software : Staad Pro
III. Engineering - Reference
POSCO 2000t/h GTSU Analysis (2009) – KBC, JIS B 8821, 8830, 8831, FEM II Software : Staad Pro
www.smh.co.kr
GHAENAT(IRAN) 1500/600t/h ST/RE Analysis (2011) Code : FEM II, JIS B 8821, 8830, 8831 Software : Staad Pro
III. Engineering - Reference
www.smh.co.kr
KOMIPO 2700t/h CSU Analysis (2017)
Code : KBC, JIS B 8821, 8830, 8831, FEM II Software : GT Strudl, Ansys (FEM)
FEM Analysis Structure Analysis
III. Engineering - Reference
www.smh.co.kr
NSSMC(JAPAN) Reclaimer Analysis (2018)
Code : JIS B 8821, 8830, 8831, JSME Software : Staad Pro, Ansys (FEM)
FEM Analysis
Structure Analysis
III. Engineering - Reference
www.smh.co.kr
GOSEONG 350t/h Ship Loader Analysis (2018) Code : KBC, JIS B 8821, 8830, 8831, FEM II Software : Midas Gen
III. Engineering - Reference
www.smh.co.kr
• Travelling Parts • Portal Frame • L-Frame Machining
• Sea Transportation • Boom Frame • Ballast Frame & Tank
IV. Manufacturing
Continuous Ship Unloader
www.smh.co.kr
• Travelling Balance • Portal Frame • Portal Frame Machining
• Sea Transportation • Inland Transportation • Bucket Wheel Assembly
IV. Manufacturing
Stacker, Reclaimer & Stacker cum Reclaimer
www.smh.co.kr
V. Sea-Transportation & Engineering
Fully Erected or Sub-Assembled Sea-Transportation
Lift-On/Off & Rail-On/Off Engineering
www.smh.co.kr
VI. Site Erection & Commissioning
Continuous Ship Unloader
www.smh.co.kr
VI. Site Erection & Commissioning
Stacker, Reclaimer & Stacker cum Reclaimer
www.smh.co.kr
Goliath Gantry Crane
• Lift & Leg Connection • Lifting 2 • Lifting 3
• Commercial Operation • Load Test • Completion of Lifting
VI. Site Erection & Commissioning
www.smh.co.kr
VII. Track Record (Before SMH Establishment)
Succession Confirmation
of Samsung Heavy Industries Co.,Ltd.
www.smh.co.kr
No. Project Name Contract
Date Kinds of Machine
Specification
1 SHI 2-Dock Goliath Gantry Crane (600Ton)
‘07.08 Goliath Crane
- Basic & Detail Engineering, SV
- Capacity : 600t x 2sets (300x2, 400x1) - Span : 175/163m - Lift : +65 ~ -15m
2 POSCO Pohang CSU & Belt Conveyor
‘07.07 CSU, B.C
- Basic & Detail Engineering, SV
- Capacity : 1,500t/h, Span : 30.0m, Slewing radius : 35m - Material : Limestone, Coal, Ore
3 Kwanjin E.O.C Maint. ‘07.07 E.O.C - Maintenance
4 Youngheung Power plant Shiploader Engineering
‘07.07 S/L - Electrical Engineering - Capacity : 600t/h
5 POSCO Kwangyang 3rd Blending RE & ST Upgrade
‘07.07 BL. RE BL. ST
- Engineering, Bucket & Main structure, SV - Capacity : 800t/h -> 1,000t/h - Span : 34m
6 Hyundai Steel Pulley ‘07.10 B.C - Pulley Engineering
7 Kwanjin Moving Car ‘07.10 Moving
Car - Capacity : 10ton (2sets) - Major Specification : Curved Rail
8 Hyundai Steel Coal/Coke ‘07.11 B.C - Basic & Detail Engineering, SV
9 KAI - RGV Moving Car ‘08.01 Moving
Car
- Capacity : 20.3ton(1set)
- Major Specification : Table Lifting
VII. Track Record
www.smh.co.kr
No. Project Name Contract
Date Kinds of Machine
Specification
10 POSCO Pohang CSU ‘08.01 CSU - Shuttle Frame Design/Manufacturing
11 Kwanjin E.O.T.C ‘08.01 EOC - EOTC Travelling, Rail
12 POSCO Pohang CSU ‘08.04 CSU - Bucket 0.3m3 .
13 Indonesia KIDECO 5th Upgrade
‘08.05 BC - Basic/Detail Engineering, SV
14 POSCO Kwangyang BC upgrade
‘08.09 BC - Basic/Detail Engineering, SV - BC 62 Line
15 POSCO Pohang
Yard Machine ’08.10
ST RE
BL. RE
- Basic/Detail Engineering, Manufacturing, SV - Stacker 6000t/h x 3, Reclaimer 2000t/h x 4,
- Blending Re 1000t/h x 1, Blending Stacker 1000t/h x1 - Stacker/Reclaimer 4500/2000t/h x 1
16 POSCO Kwangyang CSU ‘09.01 CSU - Basic/Detail Engineering, Manufacturing, Erection & Commissioning - Luffing Cylinder x 2 (Dia 532x7200ST)
17 POSCO Pohang GTSU ‘09.01 GTSU - Basic/Detail Engineering, SV - GTSU 2000t/h x 1
18 Chile Angamos CHP Stacker ‘09.03 ST - Basic/Detail Engineering, Manufacturing, Commissioning, SV - Stacker1500t/h x 1
VII. Track Record
www.smh.co.kr
No. Project Name Contract
Date Kinds of Machine
Specification
19 POSCO Kwangyang 4th Blending RE Upgrade
‘09.04 BL RE - Basic/Detail Engineering, Manufacturing, SV - Capacity : 1000t/h -> 1,500t/h
20 POSCO Kwangyang
Reclaimer Upgrade
‘08.10
‘08.11 ‘09.04
RE - Basic/Detail Engineering, Manufacturing, SV
- Reclaimer 2000t/h x 7
21 POSCO Kwangyang Sinter Plant Belt Conveyor
‘09.09 BC - Basic/Detail Engineering, Manufacturing, SV - Belt Conveyor 9 Line
22 POSCO Kwangyang CSU ‘09.09 CSU - Basic/Detail Engineering, Manufacturing, Erection & Commissioning
- CSU BE Drive Cover Ass’y,
23 Mobile Harbor Crane System ‘09.11 CC - Development of High speed Crane system for Mobile Harbor
24 Korea Western Power Co. CSU-02A/B Bucket Chain
‘09.11 CSU - CSU 2000t/h Bucket chain, Sprocket Replacement
25 POSCO Kwangyang CSU ‘10.01 CSU - Basic/Detail Engineering, Manufacturing, Erection & Commissioning - CSU BE Ass’y & BE Drive Ass’y
26 Tokyo Power CSU (Japan) ‘10.06 CSU - Engineering, Manufacturing, Erection, Transportation - Capacity : 1400t/h (The Korea’s First Export CSU to Japan)
27 Hyundai Steel #4 CSU Recovery
‘10.08 CSU - Engineering, Manufacturing, Erection, Commissioning - Capacity : 1600t/h
VII. Track Record
www.smh.co.kr
No. Project Name Contract
Date
Kinds of
Machine Specification
28 Steel Plant (Iran) Stacker/Reclaimer
’10.10 ST/RE - Basic/Detail Engineering, SV - Capacity : 1,500/600t/h
29 POSCO Kwangyang #1 CSU ‘12.06 CSU - Basic/Detail Engineering, Manufacturing, Erection & Commissioning - CSU BE Post
30 Korea Western Power Co. ST/RE Bush Replace
‘11.03 ST/RE - Basic/Detail Engineering, Manufacturing, Erection & Commissioning - Capacity : 3,200/3,400t/h
31 POSCO Pohang
Cokes Reclaimer ’11.05 RE
- Basic/Detail Engineering, Manufacturing, SV
- Reclaimer 500t/h x 2
32 SES CSU (Japan) Transportation Support
’11.06 CSU - Engineering, Manufacturing
33 Hyundai Steel 3rd Coal/Coke Plant
‘11.07 BC - Basic & Detail Engineering, SV
34 SES GTSU (Japan) ‘11.12 GTSU - Manufacturing (Travelling, Hopper, B.C) - Capacity : 1,800t/h
35 Korea South-East Power Co. CSU & ST/RE
‘12.01 CSU ST/RE
- Basic/Detail Engineering, Manufacturing, SV - CSU 2,400t/h x 2, ST/RE 4,800t/h x 2
36 Ssangyong shipping #1 CSU ‘12.04 CSU - Turnkey Base - Capacity : 1,500t/h
VII. Track Record
www.smh.co.kr
No. Project Name Contract
Date Kinds of Machine
Specification
37 Korea Western Power Co. ST/RE B/W Drive Replace
‘12.04 ST/RE - Basic/Detail Engineering, Manufacturing, Erection & Commissioning - Capacity : 3,200/3,400t/h
38 POSCO Kwangyang #2 CSU ‘12.06 CSU - Basic/Detail Engineering, Manufacturing, Erection & Commissioning - CSU Rotary Feeder Replacement
39 Korea Western Power Co. CSU-02A Hyd. System
Replace ‘12.08 CSU - CSU 2,000t/h Hydraulic System Replacement
40 Ssangyong shipping #2 CSU & Belt Conveyor
‘13.01 CSU BC
- 1,500 t/h CSU & 3,600t/h Belt conveyor 5Lines - Turnkey Base
41 Ssangyong shipping ST/RE ‘13.09 ST/RE - 3,000/1,000t/h Stacker/Reclaimer, Turnkey Base
42 Korea Midland Power CSU ‘13.09 CSU - Basic/Detail Engineering, Manufacturing, SV - CSU 2,700t/h x 2 (The World’s Biggist CSU)
43 SMH 10ton E.O.T.C ‘13.10 EOC - 10ton Electric Overhead Travelling Crane
44 2th Work reinforcing ground for Ssangyong Shipping BC
‘13.10 BC - Civil Engineering Works
VII. Track Record
www.smh.co.kr
No. Project Name Contract
Date Kinds of Machine
Specification
45 #A BE Post Tube maintenance for ship unloader of Tae-an #2 wharf
‘14.04 CSU - Capacity : 2,000t/h
46 Ssangyong shipping Spare Parts
‘14.11 CSU ST/RE
- Additional Supplying Spare Parts
47 Yeongheung Thermal Power Plant CSU Hinge Upgrade
‘15.03 CSU - Hinge Pin Upgrade work (#B, #C)
48 Korea Western Power Co. CSU #B Hyd. System Replace
‘15.06 CSU - CSU 2,000t/h Hydraulic System Replacement
49 POSCO Kwangyang #1 CSU ‘15.07 CSU - Basic/Detail Engineering, Manufacturing, Erection & Commissioning - L-Frame, BE Upper part, Rotary Feeder Replacement
50 Korea Midland Power Bucket Elevator Casing Changing Construction
‘15.11 CSU - Basic/Detail Engineering, Manufacturing, Erection & Commissioning - Bucket Elevator Casing
51 NSSMC Stacker/Reclaimer (Japan)
‘15.11 ST/RE - 800/400t/h Stacker/Reclaimer - Basic/Detail Engineering, Manufacturing, Sea Transportation, Commissioning
VII. Track Record
www.smh.co.kr
No. Project Name Contract
Date Kinds of Machine
Specification
52 CJ Kunsan Coal Terminal ‘16.04 CSU BC
- 1920t/h CSU, 1920t/h Belt Conveyor 8Lines - Turnkey Base
53 NSSMC Pipe Conveyor (Japan)
‘16.09 BC - 250t/h Pipe Conveyor & Common BC - Engineering, Manufacturing, Sea Transportation
54 Korea Midland Power CSU (Boryeong Fire Plant, 3 Quay)
‘16.11 CSU - Basic/Detail Engineering, Manufacturing, SV - CSU 2,700t/h x 2 (The world’s biggist CSU)
55 Yeongheung Thermal Power Plant CSU Hinge Upgrade
‘16.12 CSU - Hinge Pin Upgrade work (#A, #D)
56 Korea Midland Power (Cable Tray Support 172m)
‘17.02 ETC - EPC
57 Goseong Hai Thermal Power Plant Shiploader
‘17.09 SL - SL 350t/h x 1 - Turnkey Base
58 NSSMC Reclaimer (Japan) ‘18.02 ST/RE - 600t/h Reclaimer - Basic/Detail Engineering, Manufacturing, Sea Transportation, Commissioning
59 NSSMC Nagoya Bulk Terminal GTSU On-Board Belt Conv.
‘18.05 BC - 3900t/h Grab Type Ship Unloader - Manufacturing, Sea Transportation, Commissioning
60 CJ Korea Express LLC Repair ‘18.07 LLC - 750 Ton Level Luffing Crane
- Engineering, Manufacturing, Erection, Commissioning
VII. Track Record
www.smh.co.kr
No. Project Name Contract
Date Kinds of Machine
Specification
61 JFE Chiba Coke Belt Conveyor (Japan)
‘18.12 BC - 25t/h, 300t/h Belt conveyor - Engineering, Manufacturing, Sea Transportation
62 Vietnam Nghi Son 2 CFPP Stacker cum Reclaimer
‘18.12 ST/RE - 2,600/1800t/h Stacker cum Reclaimer x 2 - Engineering, Manufacturing
63 JERA Taketoyo CSU (Japan) ‘19.07 CSU - 1500t/h CSU X 2 - Detail Engineering, Manufacturing, Sea Transportation
64 POSCO Kwangyang CSU #8 Boom Slewing Ring Gear Replace
’19.12 CSU - CSU 3,000t/h Boom Slewing Ring Gear Replacement
65 Mitubishi Chemical
Ship Loader ‘20.9 SL
- 800t/h Ship Loader
- Engineering, Manufacturing, Sea Transportation
VII. Track Record
www.smh.co.kr
VII. Track Record [Photo]
1. SHI 600Ton Goliath Crane (2008)
2. POSCO 1500T/H CSU (2008)
4. Yunghung Power Plant
600T/H Ship Loader
5. POSCO Kwangyang 3rd 1000T/H Blending Reclaimer [2008]
8. Hyundai Steel Coal & Coke Belt Conveyor [2009]
9. KAI 20.3 Ton RGV Moving Car [2008]
www.smh.co.kr
Korea Midland Power Boryeong CHP [2007]
VII. Track Record [Photo]
www.smh.co.kr
13. KIDECO Coal Mine & Terminal (2009]
VII. Track Record [Photo]
www.smh.co.kr
15. POSCO Pohang
2000T/H Reclaimer (2009)
15. POSCO Pohang
6000T/H Stacker (2009)
VII. Track Record [Photo]
www.smh.co.kr
17. POSCO Pohang 2000T/H GTSU [2010]
VII. Track Record [Photo]
www.smh.co.kr
18. Chile Angamos 1500T/H Stacker [2010]
19. POSCO Kwangyang 4th
1500T/H Blending Reclaimer (2009)
VII. Track Record [Photo]
www.smh.co.kr
21. POSCO Kwangyang Sinter Belt Conveyor [2010]
VII. Track Record [Photo]
www.smh.co.kr
22. POSCO Kwangyang 3000/2100T/H CSU [2010]
VII. Track Record [Photo]
www.smh.co.kr
23. Mobile Harbor Crane MH A1250 (2009)
VII. Track Record [Photo]
www.smh.co.kr
26. JAPAN SES, Onahama 1400T/H CSU [2012]
VII. Track Record [Photo]
www.smh.co.kr
34. JAPAN SES(, Sumitomo 1800T/H GTSU [2012]
VII. Track Record [Photo]
www.smh.co.kr
35. Korea south-East Power 2,400T/H CSU & 4,800/4,800T/H ST/RE [2013]
VII. Track Record [Photo]
www.smh.co.kr
36. Ssangyong Shipping #1 1,800T/H CSU [2013]
VII. Track Record [Photo]
www.smh.co.kr
40 . Ssangyong Shipping #2 1,800T/H CSU & 3600T/H BC [2014]
41 . Ssangyong Shipping 3000/1000T/H ST/RE [2014]
VII. Track Record [Photo]
www.smh.co.kr
42 . Korea Midland Power 2,700T/H CSU x 2 [2015]
VII. Track Record [Photo]
www.smh.co.kr
43. SMH 10ton Electric Overhead Crane [2013]
VII. Track Record [Photo]
www.smh.co.kr
49. POSCO Kwangyang 3000/2100T/H CSU [2015]
VII. Track Record [Photo]
www.smh.co.kr
51. NSSMC 800/400T/H Stacker/ Reclaimer [2015, JAPAN]
VII. Track Record [Photo]
www.smh.co.kr
52. CJ Gunsan & Mokpo Coal Terminal [2015]
CJ Gunsan Coal
Terminal
VII. Track Record [Photo]
www.smh.co.kr
58. NSSMC 600T/H Reclaimer [2018, JAPAN]
VII. Track Record [Photo]
www.smh.co.kr
59. NSSMC Nagoya 3900T/H GTSU On-Board Belt Conv. [2018]
VII. Track Record [Photo]
www.smh.co.kr
60. CJ-KOREA EXPRESS 750T/H LLC REPAIR [2018]
VII. Track Record [Photo]
www.smh.co.kr
64. POSCO Kwangyang CSU #8 Boom Slewing Ring Gear Replace [2020]
VII. Track Record [Photo]
www.smh.co.kr
VIII. Certificates
[Business License] [Plant License] [Certificate of ISO 9001]
[License of Mechanical Construction Business]
[License of Electrical Construction Business]
[Certificate of INNO-BIZ] [Certificate of R&D Center]
www.smh.co.kr
[Certificates of Authorized Maintenance Co. by Korea Electric Power Corporation]
VIII. Certificates
www.smh.co.kr
Appendix - News for SMH
www.smh.co.kr
Appendix - News for SMH
www.smh.co.kr
Appendix - News for SMH
www.smh.co.kr
Appendix - CSR
www.smh.co.kr
Masan New Port
SMH’s New Factory Area (12,088m2)
in Masan New Port
SMH’s Head Office
in Chang-won
Appendix - Facilities
Busan Chang-won
Kimhae
SMHC in Gimhae
www.smh.co.kr
Appendix - Facilities
SMH’s Head Office in
Chang-won City
SMHC in Gimhae City
Seoul Office
www.smh.co.kr
Thank you for your attention!
S-Material Handling Co., Ltd.
Director/ Sales
JUNG-SUB SONG
Tel. 82-55-289-6455
Fax.82-55-289-6457
E-mail : [email protected]
President & CEO
JANG-YOUNG CHUNG
Tel. 82-55-289-6450
Fax.82-55-289-6457
E-mail : [email protected]