interface probes - qa tech · 36 | qa technology company, inc. | | all specifications subject to...
TRANSCRIPT
36 | QA Technology Company, Inc. | www.qatech.com | All specifications subject to change without notice. All dimensions are in [mm]. All spring forces are oz [gm/newtons]. © 2020 QA Technology Company, Inc.
INTERFACE PROBES
Ø.0538[1.367]
1.460[37.08]
.315 [8.00]Full Stroke
1.000 [25.40]
Ø.025 [0.64]
Ø.040 [1.02]Ø.056 [1.42]
Ø.0538[1.367]
1.310[33.27]
.250 [6.35]Full Stroke
Ø.122 [3.10]
.060 [1.52]
1.000 [25.40]
Ø.115 [2.92]
KEYSIGHT/AGILENT100-PRP4070L
KEYSIGHT/AGILENT100-PRP2519L
Ø.0538[1.367]
1.310[33.27]
.250 [6.35]Full Stroke
.040 [1.02]
1.000 [25.40]
Ø.062 [1.57]
.036 [0.91]
KEYSIGHT/AGILENT100-PRP2562L
Ø.070 [1.78] (typ)100-SDN253W3-HØ.074 [1.88] (typ) Stop Ring
.139 [3.53] (typ).079 [2.01] (typ)
.039 [0.99] (typ)
1.080 [27.43] (typ)
.164 [4.17]
100-SDN253R5-H
.947 [24.05]
�.025 [0.63]
Ø.025 [0.63]
Ø.070 [1.78] (typ)
100-
SDN2
53W
3-H
Ø.074 [1.88] (typ) Stop Ring
.139 [3.53] (typ).079 [2.01] (typ)
.039 [0.99] (typ)
1.080 [27.43]
(typ)
.164 [4.17]
100-
SDN2
53R5
-H
.947[24.05]
�.025[0.63]
Ø.025 [0.63]
Interface Probes are used in testers for electromechanical contact between the fixture and tester. QA Technology has listed the part numbers that correspond with the applicable testers. These part numbers are QA’s recommended direct replacements.
KEYSIGHT/AGILENT QA PROBE/SOCKET PART NUMBERAll 3070 ICT Testers 100-PRP2519L/100-SDN253R5-H
Polarity Check 100-PRP2562L/100-SDN253W3-H
Test Jet 100-PRP4070L/100-SDN253W3-H
P/N: 100-PRP2519L
Tube Letter Material/Finish Average
ResistanceCurrent Rating1
SS @ 204°CP Nickel silver/ID precious metal clad < 15 mOhms 16.2 Amps
Tip
Styl
e Digit Material/Finish
19 Heat treated BeCu/gold plated over nickel
Sprin
g Letter Spring Force Preload @ .167 [4.24] Stroke Material Cycle Life @
.167 [4.24] StrokeL Low 1.3 [37g/0.36N] 3.5 [99g/0.97N] SS 1,000,000
P/N: 100-PRP2562L
Tube Letter Material/Finish Average
ResistanceCurrent Rating1
SS @ 204°CP Nickel silver/ID precious metal clad < 15 mOhms 16.2 Amps
Tip
Styl
e Digit Material/Finish
62 Heat treated BeCu/gold plated over nickel
Sprin
g Letter Spring Force Preload @ .167 [4.24] Stroke Material Cycle Life @
.167 [4.24]StrokeL Low 1.3 [37g/0.36N] 3.5 [99g/0.97N] SS 1,000,000
P/N: 100-PRP4070L
Tube Letter Material/Finish Average
ResistanceCurrent Rating1
SS @ 120°CP Nickel silver/ID precious metal clad < 20 mOhms 10.2 Amps
Tip
Styl
e Digit Material/Finish
70 Heat treated BeCu/gold plated over nickel
Sprin
g Letter Spring Force Preload @ .317 [8.05] Stroke Material Cycle Life @ .317 [8.05] Stroke
L Low 0.8 [23g/0.22N] 3.0 [85g/0.83N] MW 1,000,000
P/N: 100-PRG2503L
Tube Letter Material/Finish Average
ResistanceCurrent Rating1
SS @ 204°CG Nickel silver/OD gold plated < 15 mOhms 17.3 Amps
Tip
Styl
e Digit Material/Finish
03 Heat treated BeCu/gold plated over nickel
Sprin
g Letter Spring Force Preload @ .167 [4.24] Stroke Material Cycle Life @ .167 [4.24]Stroke
L Low 1.3 [37g/0.36N] 3.5 [99g/0.97N] SS 1,000,000
| www.qatech.com | QA Technology Company, Inc. | 37 All specifications subject to change without notice. All dimensions are in [mm]. All spring forces are oz [gm/newtons]. © 2020 QA Technology Company, Inc.
Ø.0538[1.367]
1.310[33.27]
.250 [6.35]Full Stroke
Ø.062 [1.57]
50°(3)
1.000 [25.40]
TERADYNE 100-PRG2503L
45°(3)
Ø.040[1.02]
43 Chisel
60°
Ø.040[1.02]
41 Spear
Ø.0538[1.367]
.880[22.35]
.730[18.54]
.150 [3.81]Full Stroke
Ø.0407 [1.034](max)²
TERADYNE/GENRAD100-PLn15nnn-n
45°(3)
Ø.031[0.79]
43 Chisel
30°
Ø.031[0.79]
41 Spear
Ø.0538[1.367]
.970[24.64]
.730[18.54]
.240 [6.10]Full Stroke
Ø.0323 [0.821](max)²
TERADYNE/GENRAD100-PRG24nnS-n
Ø.0538[1.367]
.855[21.72]
.730[18.54]
.125 [3.18]Full StrokeØ.0407
[1.034](max)²
60°
TERADYNE/GENRAD 100-PL n1241n-n
TERADYNE/GENRAD QA PART NUMBER1800 Series 7878, 8852, 8855 100-PRG2503L See page 29 for sockets
2270, 2271, 2272, 2282 (any model), 2283, 2284, 2286, 2287 built before 7/95 100-PLP1241S and/or 100-PLP1241S-B See page 25 for sockets
TS121, TS124, TS128, TS81, TS84, TS86, TS87, 2280, 2281, 2281a, 2287a 228x ICA (any model), 2283, 2284, 2286, 2287 built after 7/95 100-PLP1541S and/or 100-PLP1541S-B See page 25 for sockets
2287L, 2287LX, TS87L, TS87LX, TS128L, TS124LX, TSLH, TSLX, TSH52, TSH51, TSMS, TSA, Tester model numbers ending in “L” (high density capacity) 100-PRG2441S and/or 100-PLP1541S See page 25 for sockets
100-PLn1241n-n 100-PLn15nnn-n 100-PRG24nnS-n
Tube
Letter Material/Finish Average Resistance
P Nickel silver/ID precious metal clad < 20 mOhms < 20 mOhms NA
G Nickel silver/OD gold plated < 25 mOhms < 25 mOhms < 15 mOhms
N Nickel silver/no finish < 45 mOhms < 45 mOhms NA
Tip
Styl
e Digits Material/Finish
41 Heat treated BeCu/gold plated over nickel, spear 41 41 41
43 Heat treated BeCu/gold plated over nickel, chisel NA 43 43
Sprin
g
Letter Spring Force Preload @ .107 Stroke Material Cycle Life @ .107 [2.70] Stroke Cycle Life @ .107 [2.70] Stroke Cycle Life @ .200 [5.08] Stroke
L Low 0.7 [20g/0.19N] 1.5 [43g/0.42N] SS 1,000,000 1,000,000 NA
S Standard 1.7 [48g/0.47N] 3.5 [99g/0.97N] SS 1,000,000 1,000,000 NA
S Standard 1.8 [51g/0.50N] 3.5 [99g/0.97N] SS NA NA 1,000,000
H High 2.2 [62g/0.61N] 5.5 [156g/1.53N] MW 1,000,000 1,000,000 NA
X Extra 3.0 [85g/0.83N] 8.0 [227g/2.22N] MW 1,000,000 1,000,000 NA
U Ultra 4.5 [128g/1.25N] 10.0 [283g/2.78N] MW 250,000 250,000 NA
B High Preload 2.0 [57g/0.56N] 2.6 [74g/0.72N] SS NA NA 1,000,000
Optio
n
Letter DescriptionB Curved tube (pylon replacement)
N No probe lubrication. Removing probe lubrication greatly reduces cycle life and should only be used in applications requiring operating temperatures below -55°C.
(Blank) No option required
Operating temp.: -55°C to 120°C1 Current Rating is affected by spring material and lubrication choices. Standard lubrication has a 204˚C maximum operating temperature limit. Before using probes near these current limits, please refer to Current Carrying Capacity and Operating Temperature Application Notes.
2 Maximum plunger OD should be used to calculate minimum guide plate clearance holes.
P/N:
INTE
RFAC
E PR
OBES