inta commercial collection april 2011

SPRING/SUMMER 2011

THE COMMERCIAL COLLECTION FROM

CONTENTS

Introduction 3.

Less abled 4.

Doc M shower pack 10.

Doc M low level 14.

Doc M closed coupled 18.

Thermostatic mixing valves 22.

Intatherm taps 30.

Sequential/Lever operated taps 34.

Non concussive taps 38.

Perfect time taps 46.

Infrared 54.

Shower panels 60.

Timed flow 66.

Vandal resistant 70.

Commercial showers 76.

Spout taps 84.

Knee/Pedal operated taps 90.

HTM64 Hospital valves 98.

Intajet 104.

Radiator valves 110.

General information 114.

WWW.INTATEC.CO.UK2. 3.

Part G Legislation came into force April 2010 states:‘the hot water supply temperature to a bath should be limited to a maximum of 48°C by use of an in line blending valve or other appropriate temperature control device, with a maximum temperature stop and a suitable arrangement of pipework’.

THIS MEANS ALL NEW BATHS MUST BE THERMOSTATICALLY PROTECTED.In order to comply with this new building legislation, Intatec, the anti scald specialists, has a range of solutions which comply with BS EN1111 and BS EN1287 for under and over the bath.

Each thermostatic shower, bath mixer or bath/shower mixer supplied by inta which bears the TMV2 or TMV3 logo is designed to protect people using the bathroom and comply with the new legislation. Make sure that when you fit a bath or change your taps that you protect those you care about by fitting an inta anti scald bath mixer or bath/shower mixer.

Building Regulations

Compliant Products

SAFETY, QUALITY AND STYLE INSPIRING CONFIDENCEIntatec offers a range of superbly designed products which has been designed and developed to bring style and more importantly safety to both bath and shower room.The introduction of legislation relating to the compulsory fitting of anti scald thermostatically controlled products will mean the TMV2 and TMV3 approved Intatec range will be essential for installation in domestic, care, hospital, health, leisure and institutional applications.Our shower and bath/shower mixers are guaranteed for 5 years from the date of purchase* when fitted in accordance with installation instructions and best working practice (including local water bylaws).

*Replacement products or replacement parts are available in the unlikely event of a manufacturing fault occurring. Liability does not cover consequential loss or damage.

THE COMMERCIAL AND LESS ABLE SHOWER ROOM RANGE

There is an ever increasing market for washroom product for the less able, in both commercial and private sectors. Inta offers a range of grab rails, shower risers and peripherals that are both hard wearing and practical.

Include a Vista sequential shower mixer and you have all of the elements of a hard working bathroom.

COMMERCIAL AND LESS ABLED SHOWERS

5.


WWW.INTATEC.CO.UK6.

LESS ABLED SHOWER KITwith 900mm rail kit, multifunction head and 2m hose

DESCRIPTION CODE PRICE

less abled shower kit with 900mm rail kit, multifunction head and 2m hose

LA1003WH £106.64

VISTA CONCEALED THERMOSTATIC SEQUENTIAL CONTROL SHOWERDESCRIPTION CODE PRICE

vista concealed thermostatic sequential control shower 90032CP £319.30

VISTA EXPOSED THERMOSTATIC SEQUENTIAL CONTROL SHOWERwith top and bottom outlet


vista exposed thermostatic sequential control showerwith top and bottom outlet

90033CP £335.52

LEISURE THEROMSTATIC SHOWER VALVEDESCRIPTION CODE PRICE

leisure thermostatic shower valve 10019CP £146.44

VISTA EXPOSED THERMOSTATIC SEQUENTIAL CONTROL SHOWERDESCRIPTION CODE PRICE

vista exposed thermostatic sequential control shower 90030CP £319.30

TECHNOLOGY BUILT IN

TECHNOLOGY BUILT IN

TECHNOLOGY BUILT IN

All prices are exclusive of VAT All prices are exclusive of VAT

TECHNOLOGY BUILT IN

WWW.INTATEC.CO.UK8.

145

40 5 19.5

82

45CTR

LEISURE THERMOSTATIC SHOWER VALVE 10019CPMax inlet pressure static 10 barMin inlet pressure 0.25 barMax inlet temperature 65°CFactory pre-set temperature 38°C with max temp stopInlet connections G½˝ M BSP (valve body)Outlet connections G½˝ BSPMin temp to achieve hot or cold failsafe 10°C

System installation Unvented, pressurised, gravity and combi boilers

LESS ABLED SHOWER KIT WITH 900MM RAIL KIT, MULTIFUNCTION HEAD AND 2M HOSE

VISTA EXPOSED THERMOSTATIC SEQUENTIAL CONTROL SHOWERWITH TOP AND BOTTOM OUTLET 90033CPMax inlet pressure static 5 barMin inlet pressure 0.2 barMax inlet temperature 85°CFactory pre-set temperature 38°C with max temp stopInlet connections 15mm compression elbowsOutlet connections G½˝ BSPMin temp to achieve hot or cold failsafe 15°C


VISTA CONCEALED THERMOSTATIC SEQUENTIAL CONTROL SHOWER 90032CPMax inlet pressure static 5 barMin inlet pressure 0.2 barMax inlet temperature 85°CFactory pre-set temperature 41°C with max temp stopInlet connections 15mm compression elbowsOutlet connections 15mm compressionMin temp to achieve hot or cold failsafe 15°C


VISTA EXPOSED THERMOSTATIC SEQUENTIAL CONTROL SHOWERWITH TOP AND BOTTOM OUTLET 90030CPMax inlet pressure static 5 barMin inlet pressure 0.2 barMax inlet temperature 85°CFactory pre-set temperature 38°C with max temp stopInlet connections 15mm compression elbowsOutlet connections G½˝ BSPMin temp to achieve hot or cold failsafe 15°C


125

142

150

220 124

35

900 Ø32

150

150 125

E&OE. All dimensions quoted are in mm unless otherwise stated


THE DOC M SHOWER PACK

Wherever you need assistance in a washroom environment, Inta can help by supplying high quality affordable solutions that perform as well as they look. Add thermostatic protection that you know and trust from Inta and

you can be assured of the best possible fit for your washroom.

DOC M

11.

SHOWER PACK

DOC M SHOWER PACK

WWW.INTATEC.CO.UK12.

DOC M SHOWER ROOM PACK with white rails and white suite


doc m shower room pack with white rails and white suite

DMPS902WH £1798.51

DOC M SHOWER ROOM PACK with blue rails and white suite


doc m shower room pack with blue rails and white suite

DMPS902BL £1798.51

TECHNOLOGY BUILT INTECHNOLOGY BUILT IN

500

2200

22

00

12

00

32

05

00

250 600

650

100 300 600

BACK REST

ALARM PULL CORD, SHOWER CURTAIN RAILAND TOWEL RAIL NOT SHOWN FOR CLARITY

ELEVATION PLAN

1200MM - 1400MM RANGE FOR ADJUSTABLEAND DETACHABLE SHOWER HEAD

750MM - 1000MRANGE FOR SHOWERCONTROLS

DROP DOWN GRAB RAILS800

680

480

SHOWER CONTROL ANDADJUSTABLE SHOWER SEAT

SHOWERCURTAIN

TIP-UPSEAT

FLOOR DRAIN

ALARM PULL CORD

1500 X 1500 WHEELCHAIR TURNING SPACE

TOWEL RAIL

FALL OF FLOOR

DROP DOWNGRAB RAILS

CLOTHES HOOK

The second shower curtain is not shown for clarity.The above layout shows a left hand room. For a right hand room simply mirror the layout drawing

All prices are exclusive of VAT


THE DOC M LOW LEVEL BATHROOM RANGE



DOC M

15.

LOW LEVEL

DOC M LOW LEVEL


STANDARD DOC M 6LT LOW LEVEL PACKintacare 6lt low level pack


doc m 6ltr low level pack with white rails DM600WH £436.74

doc m 6ltr low level pack with blue rails DM600BL £436.74

DOC M 6LTR LOW LEVEL PACKwith tmv3 approval


doc m 6ltr low level pack with white rails and tmv3 approved thermostatic tap

DMX600WH £730.85

doc m 6ltr low level pack with blue rails and tmv3 approved thermostatic tap

DMX600BL £730.85

doc m 6ltr low level pack with white rails and 15mm tmv3 approved mixing valve

DM600WH3 £504.00

doc m 6ltr low level pack with blue rails and 15mm tmv3 approved mixing valve

DM600BL3 £504.00

TECHNOLOGY BUILT IN

750

800

190

60

0

1070

680

ALARM PULL CORD WITH 2 RED BANGLES

60

0

COLOSTOMY SHELF

2200

1000MM SINGLELEAF DOOR


60

0

SHELF

ALARM PULL CORD

200 600

MIRROR 400 WIDE X 1000 HIGH FIXED 600 ABOVE FLOOR

19

0

60

08

00

750

48

0 72

0-7

40

10

40

ALARM PULL CORD

WITH 2 RED BANGLES

600

15

03

20

50

0

15

00

COLOSTOMY SHELF


2200

60

0

SHELF

ALARM PULL CORD

200 600

10

40

15

00

15

03

20

50

0

480

720 -

740

500

2200

22

00

12

00

32

05

00

250 600

650

100 300 600

BACK REST


ELEVATION PLAN




0

68

0

48

0


SHOWERCURTAIN

TIP-UPSEAT

FLOOR DRAIN

ALARM PULL CORD


TOWEL RAIL

FALL OF FLOOR

DROP DOWN GRAB RAILS

CLOTHES HOOK

All prices are exclusive of VAT Please Note: WC and basin models may vary


THE DOC M CLOSED COUPLED BATHROOM RANGE



19.

DOC M CLOSED COUPLED

DOC M CLOSED COUPLED


STANDARD DOC M 6LT CLOSED COUPLED PACKintacare 6lt closed coupled pack


doc m 6ltr close coupled pack with white rails

DM601WH £436.74

doc m 6ltr close coupled pack with blue rails

DM601BL £436.74

DOC M 6 LTR CLOSE COUPLED PACKwith tmv3 approval


doc m 6ltr close coupled pack with white rails and tmv3 approved thermostatic mixing tap

DMX601WH £747.20

doc m 6ltr close coupled pack with blue rails and tmv3 approved thermostatic mixing tap

DMX601BL £747.20

doc m 6ltr closed coupled pack with white rails and a 15mm tmv3 appoved mixing valve

DM601WH3 £612.16

doc m 6ltr closed coupled pack with blue rails and a 15mm tmv3 appoved mixing valve

DM601BL3 £622.39

TECHNOLOGY BUILT IN

750

80

0

19

0

60

0

10

70

68

0

ALARM PULL CORD WITH 2 RED BANGLES

60

0

COLOSTOMY SHELF

2200



60

0

SHELF

ALARM PULL CORD

200 600


190

60

0800

750

480 720-7

40

10

40

ALARM PULL CORD

WITH 2 RED BANGLES

600

15

03

20

50

0

15

00

COLOSTOMY SHELF


2200

60

0

SHELF

ALARM PULL CORD

200 600

10

40

15

00

15

03

20

50

0

48

0

72

0 -

74

0

500

2200

22

00

12

00

32

05

00

250 600

650

100 300 600

BACK REST


ELEVATION PLAN




0

68

0

48

0


SHOWERCURTAIN

TIP-UPSEAT

FLOOR DRAIN

ALARM PULL CORD


TOWEL RAIL

FALL OF FLOOR

DROP DOWN GRAB RAILS

CLOTHES HOOK

All prices are exclusive of VAT Please Note: WC and basin models may vary


THE THERMOSTATIC MIXING VALVE RANGE

We believe that the Inta range of thermostatic mixing valves is the best available today, whatever the application. Whether a basin, bathroom, or communal shower room, Inta can provide you with a solution. All of the valves

are WRAS and either TMV2 or TMV3 certified, which means they are trusted for use in both domestic and commercial applications.

MIXING VALVES

23.

INTAMIXtmv2 and tmv3 approved thermostatic failsafe mixing valves


intamix 15mm 40015CP £56.68

intamix 22mm 40022CP £64.83

intamix 15mm with service valve 400MX15CP £74.79

intamix 22mm with service valve 400MX22CP £86.94

intamix 15mm with intasphere mx valvesand compression top connector

400MS15CP £83.17

intamix 22mm with intasphere mx valvesand compression top connector

400MS22CP £123.17

intamix 15mm with intasphere mx valves and test point 400MZ15CP £79.97

intamix 22mm with intasphere mx valves and test point 400MZ22CP £91.17

INTAMIXlow pressure under bath thermostatic mixing valve with 22mm compression


intamix low pressure under bath thermostatic mixing valve 22mm compression

60007CP £117.02

INTAMIX PRO Vthermostatic failsafe mixing valves


intamix pro v ½˝ with screwed iron M x M x M and check valves

60001CP £314.60

intamix pro v ¾˝ with screwed ironM x M x M and check valves

60003CP £400.16

intamix pro v 1˝ with screwed ironM x M x M and check valves

60004CP £499.28

intamix pro v 1¼˝ with screwed ironM x M x M and check valves

60005CP £539.74

intamix pro v 1½˝ with screwed iron M x M x M and check valves

60006CP £846.44

intamix pro v 2˝ with screwed iron M x M x M and check valves

60023CP £1340.18

intamix pro v 22mm with isolating unions 61022CPB £417.19

intamix pro v 28mm with isolating unions 61028CPB £398.00

Note: The 1¼˝, 1½˝ and 2˝ are now also supplied complete with check valves

L MIXthermostatic failsafe mixing valves


L mix 15mm 60010CP £85.97

L mix 22mm 60011CP £95.82

MIXING VALVES


TECHNOLOGY BUILT IN

TECHNOLOGY BUILT INTECHNOLOGY BUILT IN


MIXING VALVES

THE NEW INTAMIX II 15MM/22MM TMV2 AND TMV3 APPROVED THERMOSTATIC FAILSAFE MIXING VALVE 40015CP/40022CPTemperature adjustment range 30°C - 50°CTemperature stability ±2°CMax inlet temperature 85°CMax working pressure 10 bar : staticMin inlet pressure 0.2 bar : dynamicMin temp to achieve hot or cold failsafe 10°CMax pressure inlet differential 5 : 1

THE NEW INTAMIX II 15MM/22MM TMV2 AND TMV3 APPROVED THERMOSTATIC FAILSAFE MIXING VALVE SERVICE VALVE 400MX15CP/400MX22CPTemperature adjustment range 30°C - 50°CTemperature stability ±2°CMax inlet temperature 85°CMax working pressure 10 bar : staticMin inlet pressure 0.2 bar : dynamicMin temp to achieve hot or cold failsafe 10°CMax pressure inlet differential 5 : 1

THE NEW INTAMIX II15MM/22MM WITH INTASPHERE MX VALVES AND TEST POINT 400MZ15CP/400MZ22CPTemperature adjustment range 30°C - 50°CTemperature stability ±2°CMax inlet temperature 85°CMax working pressure 10 bar : staticMin inlet pressure 0.2 bar : dynamicMin temp to achieve hot or cold failsafe 10°CMax pressure inlet differential 5 : 1

THE NEW INTAMIX II 15MM/22MM WITH INTASPHERE MX VALVES AND COMPRESSION TOP CONNECTOR 400MS15CP/400MS22CPTemperature adjustment range 30°C - 50°CTemperature stability ±2°CMax inlet temperature 85°CMax working pressure 10 bar : staticMin inlet pressure 0.2 bar : dynamicMin temp to achieve hot or cold failsafe 10°CMax pressure inlet differential 5 : 1

INTAMIX LOW PRESSURE UNDER BATH MIXING VALVE 60007CPTemperature adjustment range 25°C - 55°CTemperature stability ±2°CMax inlet temperature 85°CMax working pressure 14 bar : staticMin inlet pressure 0.2 bar : dynamicMin temp to achieve hot or cold failsafe 10°CMax pressure inlet differential 2 : 1

INTAMIX PRO V 1˝/ 1¼˝ WITH SCREWED IRON M X M X M AND CHECK VALVES 60004CP/60005CPTemperature adjustment range 30°C - 65°CTemperature stability ± 2°CMax inlet temperature 85°CMax working pressure 14 bar : static | 5 bar : dynamicMin working pressure 0.2 bar: dynamicMin temp to achieve hot or cold failsafe 10°CMax pressure inlet differential 2 :1Connections ½˝ M x M x M


169

74

95

170

85 85

164

8282

Ø22

Ø22

49

60

- 7

0

10

9 -

11

9

47

51

98

73 73

Ø15/22

Ø15/22

140/146

Ø15/22

47

51

98

6666

132

Ø15/22

Ø15/22 Ø15/22


47

51

98

6666

132

Ø15/22

Ø15/22

Ø15/22

DN10

47

51

98

6666

132

Ø15/22

Ø15/22 Ø15/22

DN10 DN10

MIXING VALVES

INTAMIX PRO V 22MM/28MM 61022CP/61028CPTemperature adjustment range 30°C - 65°CTemperature stability ±2°CMax inlet temperature 85°CMax working pressure 14 bar : staticMin inlet pressure 0.2 bar : dynamicMin temp to achieve hot or cold failsafe 10°CMax pressure inlet differential 2 : 1

Max flow rate at 1 bar differential 22mm compression28mm compression

L MIX 15MM/22MMTemperature adjustment range 30°C - 50°CTemperature stability ±2°CMax inlet temperature 85°CMax working pressure 10 bar : staticMin inlet pressure 0.2 bar : dynamicMin temp to achieve hot or cold failsafe 10°CMax pressure inlet differential 5 : 1

Max flow rate at 1 bar differential 15mm 1500 l/hr (25 l/m)22mm 1700 l/hr (28.3 l/m)


Ø22/Ø28

Ø22/Ø28

99

74

304

200

2 MAXMIN 71

INTAMIX PRO V ½˝/ ¾˝ 60001CP/60003CPTemperature adjustment range 30°C - 65°CTemperature stability ± 2°CMax inlet temperature 85°CMax working pressure 14 bar : static | 5 bar : dynamicMin working pressure 0.2 bar: dynamicMin temp to achieve hot or cold failsafe 10°CMax pressure inlet differential 2:1Connections ½˝ M x M x M

INTAMIX PRO V 1¼˝ / 2˝ WITH SCREWED IRON M X M X M 60006CP/60023CPTemperature adjustment range 30°C - 60°CTemperature stability ± 2°CMax inlet temperature 85°CMax working pressure 14 bar : static | 5 bar : dynamicMin working pressure 0.2 bar: dynamicMin temp to achieve hot or cold failsafe 10°CMax pressure inlet differential 2:1Connections ½˝ M x M x M

169

74

95

170

85 85

169

74

95

170

85 85

H

C

MIX

15/22

158/160

15/22

64 70/71

134

79

79


Safe blended water to

the hot tap to the cold tap

Cold supplyHot supply

THE INTATHERM TAP RANGE

A completely integrated solution to prevent hand scalding, the Intatherm is a sequential Thermostatic Basin Mixer Tap, suitable for use with basins in public areas and DOC M. There is no need for a separate Thermostatic

Mixing Valve (TMV), as temperature is regulated internally, making Intatherm the obvious solution.INTATHERM

31.

INTATHERMtmv3 thermostatic basin mixer tap


intatherm tmv3 thermostatic basin mixer tap IT1001CP £242.96

INTATHERM IItmv3 thermostatic basin mixer tap


intatherm II tmv3 thermostatic basin mixer tap IT1003CP £242.96

INTATHERM

INTATHERM TMV3 THERMOSTATIC BASIN MIXER TAP IT1001CPMax inlet temperature 85°CFactory set temperature 43°CTemperature stability ±2°CMax working pressure 10 bar : staticMin inlet pressure 0.2 bar : dynamicMin temp to achieve hot or cold failsafe to achieve hot or cold fail safe

10°C

Max pressure inlet differential 5 : 1Connections G ½” flexible tails

Ø61152.5

118

215

145

150


INTATHERM II TMV3 THERMOSTATIC BASIN MIXER TAP IT1003CPMax inlet temperature 85°CFactory set temperature 43°CTemperature stability ±2°CMax working pressure 10 bar : staticMin inlet pressure 0.2 bar : dynamicMin temp to achieve hot or cold failsafe 10°CMax pressure inlet differential 5 : 1Connections G ½” flexible tails

TECHNOLOGY BUILT IN

TECHNOLOGY BUILT IN

165

Ø61

220

152.5

118

150



THE SEQUENTIAL AND LEVER OPERATED TAP RANGE

SEQUENTIALAND LEVER OPERATEDTAPS

35.

LEVER OPERATEDbasin mixer tap


lever operated basin mixer tap LO980CP £79.75

MINIMALISTIC LEVER TAPminimalistic lever operated basin taps


standard (75mm) lever minimalistic basin tap (single) LO990CP £82.79

LEVER BASIN TAPlever operated basin taps


standard lever operated basin taps (pairs) LO994CP £54.74

extended (150mm) lever operated basin taps (pairs) LO998CP £100.87

CONTEMPORARY LEVER OPERATEDspray mixer tap


contemporary sequential spray tap LO985CP £125.61

SEQUENTIAL/LEVER OPERATED TAPS


LEVER OPERATED BASIN MIXER TAP LO980CPMin operating pressure 1 barMax operating pressure 5 barPrefered operating range 2 - 5 barMax basin thickness 36mmConnections G ½˝ flexible tails

LEVER BASIN TAP LEVER OPERATED BASIN TAPS LO994CPEXTENDED LEVER BASIN TAP LEVER OPERATED BASIN TAPS LO998CPMin operating pressure 0.2 bar dynamicMax operating pressure 10 bar staticMax basin thickness 26mmConnections G ½˝ BSP

CONTEMPORARY LEVER OPERATED SPRAY MIXER TAP LO985CPMin operating pressure 0.5 barMax operating pressure 5 barMax basin thickness 45mmMax basin thickness G ½˝ flexible tails

STANDARD (75MM) LEVER MINIMALISTIC BASIN TAP (SINGLE) LO990CPMin operating pressure 0.2 bar dynamicMax operating pressure 10 bar staticMax basin thickness 26mmConnections G ½˝ BSP

105

42

132

75

60

95

144



150

105

170

55

75

150

110

THE NON CONCUSSIVE TAP RANGE

Water saving is increasingly important and in public amenities where taps may be left running a simple, stylish and cost effective solution can be found with the Inta range of non concussive taps.

NON CONCUSSIVE39.

NON CONCUSSIVE basin mounted contemporary tap


non concussive basin mounted contemporary tap (pairs) NC162CP £58.41

non concussive basin mounted contemporary tap (single) NC162CP(S) £31.72

NON CONCUSSIVEbasin mounted manual mixer tap


non concussive basin mounted manual mixer tap NC230CP £138.49

NON CONCUSSIVEbasin mounted mixer tap with temperature control


non concussive basin mounted mixer tap with temperature control

NC180CP £94.77

NON CONCUSSIVEbasin mounted standard tap


non concussive basin mounted standard tap (pairs) NC160CP £48.93

non concussive basin mounted standard tap (single) NC160CP(S) £27.24

NON CONCUSSIVEwall mounted tap (pairs)


non concussive wall mounted tap (pairs) NC170CP £56.38

NON CONCUSSIVEbasin mounted angled tap (pair)


non concussive basin mounted angled tap (pair) NC150CP £72.69

NON CONCUSSIVE



NON CONCUSSIVE


MULTI DIRECTIONAL NON CONCUSSIVEbasin mounted tap


multi directional basin mounted tap (single) NC200CP £59.75

MULTI DIRECTIONAL NON CONCUSSIVEwall mounted tap


multi directional non concussive wall mounted tap NC190CP £43.33

NON CONCUSSIVE BASIN MOUNTED CONTEMPORARY TAP (PAIRS) NC162CPMin operating pressure 0.5 bar dynamicMax operating pressure 10 bar staticTimed flow at 1 bar 15 seconds ± 3Basin thickness 26mmConnections G ½˝ BSP

NON CONCUSSIVE BASIN MOUNTED MANUAL MIXER TAP NC230CP

Min operating pressure 0.5 bar dynamicMax operating pressure 10 bar staticTimed flow at 1 bar 15 seconds ± 3Basin thickness 45mmConnections G ½˝ flexible tails

100

50

110

97

60

157

40Ø

NON CONCUSSIVE BASIN MOUNTED MIXER TAP WITH TEMPERATURE CONTROL NC180CPMin operating pressure 0.5 bar dynamicMax operating pressure 10 bar staticTimed flow at 1 bar 15 seconds ± 3Basin thickness 38mmConnections G ½˝ flexible tails

NON CONCUSSIVE BASIN MOUNTED STANDARD TAP (PAIRS) NC160CPMin operating pressure 0.5 bar dynamicMax operating pressure 10 bar staticTimed flow at 1 bar 15 seconds ± 3Basin thickness 26mmConnections G ½˝ BSP

105

95

55

110

110



NON CONCUSSIVE

MULTI DIRECTIONAL NON CONCUSSIVE WALL MOUNTED TAP NC190CPMin operating pressure 0.5 bar dynamicMax operating pressure 10 bar staticTimed flow at 1 bar 15 seconds ± 3Connections G ½˝ flexible tails

MULTI DIRECTIONAL BASIN MOUNTED TAP (SINGLE) NC200CPMin operating pressure 0.5 bar dynamicMax operating pressure 10 bar staticTimed flow at 1 bar 15 seconds ± 3Basin thickness 26mmConnections G ½˝ BSP


NON CONCUSSIVE WALL MOUNTED TAP (PAIRS) NC170CPMin operating pressure 0.5 bar dynamicMax operating pressure 10 bar staticTimed flow at 1 bar 15 seconds ± 3Basin thickness 26mmConnections G ½˝ BSP

NON CONCUSSIVE BASIN MOUNTED ANGLED TAP (PAIR) NC150CPMin operating pressure 0.5 bar dynamicMax operating pressure 10 bar staticTimed flow at 1 bar 15 seconds ± 3Basin thickness 26mmConnections G ½˝ BSP

101

129 61

116

83

73

40

15

114

20°


110

195

40

25°

70

40

225

THE PERFECT TIME RANGE

Perfect Time is part of Inta’s range of electronic time controlled faucets operated by ‘piezo technology’. The self closing fitting avoids the risk of taps being left on and also allows the users to open and close the faucet

according to their needs. The Perfect Time is an electronic time controlled faucet, operated by ‘piezo technology’. With a 20 second factory preset, installation or maintenance staff can easily change the preset manually

according to individual needs.

PERFECT TIME

47.

PERFECT TIMEelectronic tap


perfect time electronic tap (battery operated) IR162CP £174.16

perfect time electronic tap (mains operated) IR163CP £174.16

PERFECT TIME WALL MOUNTEDelectronic tubular tap


perfect time wall mounted electronic tubular tap(battery operated)

IR253CP £204.20

perfect time wall mounted electronic tubular tap(mains operated)

IR254CP £204.20

TOUCH SENSEelectronic tap


touch sense electronic tap (battery operated) IR800CP £214.92

touch sense electronic tap (mains operated) IR803CP £214.92

PERFECT TIME


TOUCH SENSEprogrammable flush


touch sense programmable flush 24 hours (mains operated)

IR80024 £217.34

PERFECT TIME INCLINEDelectronic tap


perfect time inclined electronic tap (mains operated) IR268CP £392.14


PERFECT TIME


LED PERFECT TIMEelectronic tap (mains operated only)


LED perfect time electronic tap - white IR900CP £352.53

LED perfect time electronic tap - green IR901CP £352.53

LED perfect time electronic tap - orange IR902CP £352.53

LED perfect time electronic tap - royal blue IR903CP £352.53

LED perfect time electronic tap - amber IR904CP £352.53

LED perfect time electronic tap - green chatreuse IR905CP £352.53

LED perfect timeelectronic tap - red IR906CP £352.53

LED perfect time electronic tap - red and green IR907CP £352.53

LED perfect time electronic tap - red and royal blue IR908CP £352.53

LED PERFECT TIME WALL MOUNTEDelectronic tubular tap (mains operated only)


LED perfect time wall mounted tubular tap - white IR910CP £395.98

LED perfect time wall mounted tubular tap - green IR911CP £395.98

LED perfect time wall mounted tubular tap - orange IR912CP £395.98

LED perfect time wall mounted tubular tap - royal blue IR913CP £395.98

LED perfect time wall mounted tubular tap - amber IR914CP £395.98

LED perfect time wall mounted tubular tap - green chartreuse IR915CP £395.98

LED perfect time wall mounted tubular tap - red IR916CP £395.98

LED perfect time wall mounted tubular tap - red and green IR917CP £395.98

LED perfect time wall mounted tubular tap - red and royal blue

IR918CP £395.98

GREENRED AND

GREENAMBER

ORANGERED AND

ROYAL BLUEGREEN

CHARTREUSE

ROYAL BLUE WHITERED

LED PERFECT TIME COLOUR OPTIONS


PERFECT TIME

PERFECT TIME INCLINED ELECTRONIC TAP IR268CPPower source mains operatedMin operating pressure 0.5 bar dynamicMax operating pressure 8 bar staticFactory set flow time 8 secondsFlow time adjustment range 8 - 60 secondsMax inlet temperature 70°CMax basin thickness 26mmConnections G½˝ BSP / 15mm compression

LED PERFECT TIME WALL MOUNTED ELECTRONIC TUBULAR TAPIR910 - IR916CPPower source mains operatedMin operating pressure 0.5 bar dynamicMax operating pressure 8 bar staticFactory set flow time 8 secondsFlow time adjustment range 8 - 60 secondsMax inlet temperature 70°CConnections G½˝ BSP / 15mm compression

LED PERFECT TIME ELECTRONIC TAP IR900CP - IR906CPPower source mains operatedMin operating pressure 0.5 bar dynamicMax operating pressure 8 bar staticFactory set flow time 8 secondsFlow time adjustment range 8 - 60 secondsMax inlet temperature 70°CMax basin thickness 26mmConnections G½˝ BSP / 15mm compression


PERFECT TIME ELECTRONIC TAP IR162CP/IR163CP

Power sourceIR162CP: battery operatedIR163CP: mains operated

Min operating pressure 0.5 bar dynamicMax operating pressure 8 bar staticFactory set flow time 8 secondsFlow time adjustment range 8 - 60 secondsMax inlet temperature 70°CMax basin thickness 26mmConnections G½˝ BSP / 15mm compression

PERFECT TIME WALL MOUNTED ELECTRONIC TUBULAR TAPIR253CP/ IR254CP


Min operating pressure 0.5 bar dynamicMax operating pressure 8 bar staticFactory set flow time 8 secondsFlow time adjustment range 8 - 60 secondsMax inlet temperature 70°CConnections G½˝ BSP / 15mm compression

TOUCH SENSE ELECTRONIC TAP IR800CP/IR803CP


Min operating pressure 0.5 bar dynamicMax operating pressure 8 bar staticFactory set flow time 15 secondsFlow time adjustment range 3 - 60 secondsMax inlet temperature 70°CMax basin thickness 26mmConnections G½˝ BSP

TOUCH SENSE PROGRAMABLE FLUSH IR80024Power source mains operatedMin operating pressure 0.5 bar dynamicMax operating pressure 8 bar staticFactory set flow time 15 secondsFlow time adjustment range 3 - 60 secondsMax inlet temperature 70°CMax basin thickness 26mmConnections G½˝ BSP

100

95

58

100

95

58

170

Ø50

139

Ø38

170

Ø50

139

Ø38

50

105

100

50

105

100


95

50°

130

85

THE INFRARED RANGE

Delivering water without contact with the spout is an ideal solution where hygiene is important, such as public toilets and washrooms. The presence of a limb is detected by an Infra Red sensor which controls a solenoid valve

to turn on a timed flow of water. This is operated by either a 6V lithium battery or mains electricity.

INFRARED

55.

INFRARED CONTEMPORARYbasin mounted tap


infrared contemporary basin mounted tap (battery operated)

IR120CP £266.18

infrared contemporary basin mounted tap (mains operated)

IR121CP £267.92

infra red advanced remote control IR303CP £64.66

INFRARED MINIMALISTICbasin mounted tap


infrared minimalistic basin mounted tap (battery operated) IR180CP £453.93

INFRARED CONCEALEDwall mounted tap


infrared concealed wall mounted tap (battery operated) IR140CP £371.91

infrared concealed wall mounted tap (mains operated) IR141CP £371.91


INFRARED FLUSH VALVEfor toilets with manual overide


infrared flush valve for toilet with manual overide(battery operated)

IR230CP £340.86

infrared flush valve for toilet with manual overide(mains operated)

IR231CP £340.76


INFRARED FLUSH VALVEfor urinals


infra red flush valve for urinals (battery operated) IR210CP £256.47

infra red flush valve for urinals (mains operated) IR211CP £266.99


INFRARED TOUCH FREE SOAP DISPENSERwall mounted


Infra red touch free soap dispenser wall mounted (battery operated)

IR400WH £228.76

INFRARED



INFRARED


INFRARED CONCEALEDshower control


infrared concealed shower control (battery operated) IR130CP £306.91

infrared concealed shower control (mains operated) IR131CP £300.99


INFRARED CONTEMPORARY BASIN MOUNTED TAP IR120CP/IR121CP


Min operating pressure 1.0 bar dynamicMax operating pressure 8 bar staticFactory set flow time 8 secondsflow time adjustment range 0 - 60 secondsMax inlet temperature 70°CMax basin thickness 26mmConnections G½˝ BSP / 15mm compression

INFRARED MINIMALISTIC BASIN MOUNTED TAP IR180CP

Power source battery operated

Min operating pressure 1.0 bar dynamicMax operating pressure 8 bar staticFactory set flow time 8 secondsflow time adjustment range 0 - 60 secondsMax inlet temperature 70°CMax basin thickness 26mmConnections G½˝ BSP

INFRARED TOUCH FREE SOAP DISPENSER WALL MOUNTED (BATTERY OPERATED) IR400CPPower source battery operatedInstallation wall mountedSensor activation range 50mmSoap container 800ml refillableSoap drop portions 1 - 1.5 cc

Connectionsinlet: G 1˝ F BSPoutlet: G 1½˝ F BSP

INFRARED CONCEALED WALL MOUNTED TAP IR140CP/IR141CP


Min operating pressure 1.0 bar dynamicMax operating pressure 8 bar staticFactory set flow time 8 secondsflow time adjustment range 8 - 60 secondsMax inlet temperature 70°CMax basin thickness 26mmConnections G½˝ BSP / 15mm compression

INFRARED CONCEALED SHOWER CONTROL IR130CP/ IR131CP


Min operating pressure 1 bar dynamicMax operating pressure 8 bar staticFactory set flow time 8 secondsflow time adjustment range 8-60 secondsMax inlet temperature 70°C

Connectionsinlet: G 1˝ F BSPoutlet: G 1½˝ F BSP

140

109

163

135

189

80

158

100

136

100

110

135

189

80136


INFRARED FLUSH VALVES FOR TOILETS WITH MANUAL OVERIDE IR230CP/IR231CP

INFRARED FLUSH VALVES FOR URINALS IR210CP/IR211CP

Power source

IR230CP: battery operatedIR231CP: mains operatedIR210CP: battery operatedIR211CP: mains operated

Min operating pressure 1 bar dynamicMax operating pressure 8 bar staticFactory set flow time 8 secondsflow time adjustment range 8 - 60 secondsMax inlet temperature 70°C

Connections IR230CP/IR231CPinlet: G 1˝ F BSPoutlet: G 1½˝ F BSP

Connections IR230CP/IR231CPinlet: G ½˝ F BSPoutlet: G ½˝ F BSP

100 110

260

THE SHOWER PANEL RANGE

An all in one showering solution for public amenities such as schools, leisure centres and prisons. The Inta range of shower panels can incorporate a timed flow push button, shower head, thermostatic mixing valves, infrared

and grab rails in one vandal resistant unit.SHOWER PANELS61.

SHOWER PANEL STAINLESS STEELwith time flow control, tmv3 mixing valve


shower panel stainless steel with time flow control, tmv3 mixing valve

SP9200CP £924.32

SHOWER PANEL STAINLESS STEELwith infra red control and vandal resistant shower head


shower panel stainless steel with infra red control and vandal resistant shower head

SP9203CP £1529.07

SHOWER PANEL STAINLESS STEELwith single entry, non concussive, and vandal resistant head


shower panel stainless steel with single entry, non concussive and vandal resistant head

SP9202CP £698.08

SHOWER PANEL STAINLESS STEELwith thermostatic temperature control, timed flow control and vandal resistant shower head


shower panel stainless steel with thermostatic temperature control, timed flow control and vandal resistant shower head

SP9210CP £1132.69

SHOWER PANELS


TECHNOLOGY BUILT IN

TECHNOLOGY BUILT IN


SHOWER PANELS

SHOWER PANEL STAINLESS STEEL WITH TIME FLOW CONTROL, TMV3 MIXING VALVE SP9200CPMin operating pressure 0.5 bar dynamicMax operating pressure 10 bar staticMax inlet temperature 65°CTemperature adjustment range 30°C - 50°CMin temperature differential to achieve hot or cold failsafe 10°C

Max pressure inlet differential 5:1Temperature stability ±2°CInlet connections 15mm compession

SHOWER PANEL STAINLESS STEEL WITH SINGLE ENTRY, NON CONCUSSIVE AND VANDAL RESISTANT HEAD SP9202CPMin operating pressure 0.5 bar dynamicMax operating pressure 10 bar staticMax inlet temperature 65°CInlet connections 15mm compession

10

50

250 75

97

0

125

¯15 - 1/2"

28

0

10

50

250 75

97

0

125

28

0

SHOWER PANEL STAINLESS STEEL WITH THERMOSTATIC TEMPERATURE CONTROL, TIMED FLOW CONTROL AND VANDAL RESISTANT SHOWER HEAD SP9210CPMin operating pressure 0.5 bar dynamicMax operating pressure 10 bar staticMax inlet temperature 65°CFactory pre-set temperature 38°CMin temperature differential to achieve hot or cold failsafe 15°C

Max pressure inlet differential 5:1Temperature stability ±2°CInlet connections 15mm compession

SHOWER PANEL STAINLESS STEEL WITH INFRA RED CONTROL AND VANDAL RESISTANT SHOWER HEAD SP9203CPPower source 6V batteryMin operating pressure 0.5 bar dynamicMax operating pressure 10 bar staticMax inlet temperature 65°CInlet connections G½˝

1050

250 75

970

125

28

0

980

28

0

1050

250 75

125

980

28

0

1050

250 75

125

E&OE. All dimensions quoted are in mm unless otherwise statedWWW.INTATEC.CO.UK64.

THE TIMED FLOW SHOWER RANGE

Water conservation is essential, and in some public establishments where multiple water outlets are used, our range of timed flow control systems are an eco-friendly, stylish and economical solution to the problem of water wastage. All Inta timed flow valves are designed to work with the intamix range of thermostatic mixing valves.TIMED FLOW

67.

TIMED FLOW

TIMED FLOW SHOWER CONTROL EXPOSED TF992CPMax operating pressure 10 bar staticMin operating pressure 0.5 bar dynamicMax inlet temperature 65°CTimed flow at 1 bar 15 ± 3 secondsInlet connections 15mm compressionOutlet connections 15mm compression

TIMED FLOW SHOWER CONTROL CONCEALED TF997CPMax operating pressure 10 bar staticMin operating pressure 0.5 bar dynamicMax inlet temperature 65°CTimed flow at 1 bar 15 ± 3 secondsInlet connections 15mm compressionOutlet connections 15mm compression

TIMED FLOW SHOWER CONTROL FOR PRISONS WITH EXTENDED SPINDLE TF222CP150/ TF222CP200/ TF222CP250Max operating pressure 10 bar staticMin operating pressure 0.5 bar dynamicMax inlet temperature 65°CTimed flow at 1 bar 15 ± 3 secondsInlet connections 15mm compressionOutlet connections 15mm compression

TIMED FLOW SHOWER CONTROL WITH TEMPERATURE ADJUSTMENT NC140CPMax operating pressure 5 bar staticMin operating pressure 1 bar dynamicMax inlet temperature 65°CTimed flow at 1 bar 35 ± 15 secondsInlet connections G ½˝ FOutlet connections 15mm compression

55

38

88

15

35 95

88

38

15

MIN15 - MAX36

0.5

55 35 95 130

WWW.INTATEC.CO.UK68. E&OE. All dimensions quoted are in mm unless otherwise stated


Ø30 Ø50

15

150 / 200 / 250

36

TIMED FLOW SHOWER CONTROLexposed


timed flow shower control exposed TF992CP £57.35

TIMED FLOW SHOWER CONTROL FOR PRISONSwith extended spindle


timed flow shower control for prisons with 150mm spindle TF222CP150 £150.63



TIMED FLOW SHOWER CONTROLconcealed


timed flow shower control concealed TF997CP £57.35

TIMED FLOW SHOWER CONTROLwith temperature adjustment


timed flow shower control with temperture adjustment NC140CP £250.39

134 - 166

148

Ø45

THE VANDAL RESISTANT SHOWER RANGE

A wide range of applications such as schools, hospitals and sports and leisure facilities makes the Intatec range of shower heads essential.

VANDAL RESISTANT

71.

VANDAL RESISTANT STANDARD HEADDESCRIPTION CODE PRICE

vandal resistant standard head VR991CP £53.96

VANDAL RESISTANT PRISON HEADDESCRIPTION CODE PRICE

vandal resistant prison head VR992CP £50.19

VANDAL RESISTANT CROSSWALL PRISON HEADDESCRIPTION CODE PRICE

vandal resistant crosswall prison head VR993CP £97.85

VANDAL RESISTANT COMPACT HEADDESCRIPTION CODE PRICE

vandal resistant compact head VR994CP £48.29

ANTI LIGATURE VANDAL RESISTANT SHOWER HEADDESCRIPTION CODE PRICE

anti ligature vandal resistant shower head VR995CP £65.08

VANDAL RESISTANT



VANDAL RESISTANT

VANDAL RESISTANT STANDARD HEAD VR991CPMax operating pressure 10 bar staticMin operating pressure 0.2 bar dynamicMax inlet temperature 65°CInlt connections G½˝ M/15mm compression

VANDAL RESISTANT PRISON HEAD VR992CPMax operating pressure 10 bar staticMin operating pressure 0.2 bar dynamicMax inlet temperature 65°CInlt connections G½˝ BSP

VANDAL RESISTANT COMPACT HEAD VR994CPMax operating pressure 10 bar staticMin operating pressure 0.2 bar dynamicMax inlet temperature 65°CInlt connections G½˝ M/15mm compression

VANDAL RESISTANT CROSSWALL PRISON HEAD VR993CPMax operating pressure 10 bar staticMin operating pressure 0.2 bar dynamicMax inlet temperature 65°CInlt connections G½˝ M/15mm compression

ANTI LIGATURE VANDAL RESISTANT SHOWER HEAD VR995CPMax operating pressure 10 bar staticMin operating pressure 0.2 bar dynamicMax inlet temperature 65°CInlt connections G½˝ M/15mm compression

129.86

97.54

57.43

45.8

94

42.3

75

170 MAX


7.5

52

95

250


THE COMMERCIAL SHOWER ARMS RANGE

The Inta range of commercial shower arms and heads is an ideal solution for showering facilities in schools, leisure centres and public shower rooms.

COMMERCIAL SHOWER ARMS

77.

INTACEPT TOP ENTRY SHOWER ARMDESCRIPTION CODE PRICE

intacept top entry shower arm IN902CP £48.90

INTACEPT BOTTOM ENTRY EXTENDED SHOWER ARMDESCRIPTION CODE PRICE

intacept bottom entry extended shower arm IN904CP £60.50

INTACEPT OVERHEAD SHOWER HEADwith anti scale shower head


intacept overhead antiscale shower head (standard) IN9100CP £31.05

INTACEPT BOTTOM ENTRY SHOWER ARMwith mini anti scale shower head


intacept bottom entry shower with rub clean shower head IN930CP £65.78

INTACEPT BOTTOM ENTRY EXTENDED SHOWER ARMwith anti scale shower head


intacept bottom entry extended shower arm with anti scale shower head (mini)

IN940CP £69.80

INTACEPT OVERHEAD MINI SHOWER HEADDESCRIPTION CODE PRICE

intacept overhead rub clean shower head IN9200CP £16.59




SHOWER ARM KITexposed


shower arm kit exposed 60061CP £125.39

shower arm kit concealed 60063CP £51.48

Note: exposed shower arm kit (60061CP) shown. vertical pipe is not supplied with 60063CP



INTACEPT TOP ENTRY SHOWER ARM IN902CP INTACEPT BOTTOM ENTRY EXTENDED SHOWER ARM IN904CP

INTACEPT BOTTOM ENTRY SHOWER ARM WITH MINI ANTI SCALE SHOWER HEAD IN930CP

INTACEPT OVERHEAD STANDARD SHOWER HEAD IN9100CP

122

56

Ø50

32

29

Ø25Ø20

24.75

36

192

68

Ø50

32

37

Ø25Ø20

24.75

36

54

70

88

24



175

56

Ø50

32

29

Ø25Ø20

24.75

155



INTACEPT BOTTOM ENTRY EXTENDED SHOWER ARM WITH ANTI SCALE SHOWER HEAD IN940CP

INTACEPT OVERHEAD MINI SHOWER HEAD IN9000CP

SHOWER ARM KIT CONCEALED 60063CPSHOWER ARM KIT EXPOSED 60061CP

82

65

2330 57

180

68

Ø50

32

37

Ø25Ø20

24.75

155

300±5


300±5

THE INTA SPOUTS RANGE

The Inta range of spouts is designed to suit a wide variety of applications.

SPOUTS

85.

INTA BASIN MOUNTED FIXED SPOUT TAPDESCRIPTION CODE PRICE

inta basin mounted fixed spout tap 5160CP £61.28

INTA WALL MOUNTED FIXED BASIN SPOUT TAPDESCRIPTION CODE PRICE

inta wall mounted fixed basin spout tap 5161CP £37.63

INTA BASIN MOUNTED SWIVEL TUBE SPOUT TAPDESCRIPTION CODE PRICE

inta basin mounted swivel tube spout tap 5162CP £55.24

INTA BASIN MOUNTED FIXED CAST SPOUT TAPDESCRIPTION CODE PRICE

inta basin mounted fixed cast spout tap 5163CP £47.17

INTA WALL MOUNTED FIXED MINIMALISTIC SPOUT TAPDESCRIPTION CODE PRICE

inta wall mounted fixed minimalistic spout tap 5164CP £44.13

SPOUTS



SPOUTS

INTA BASIN MOUNTED FIXED SPOUT TAP 5160CPMax operating pressure 10 bar staticMin operating pressure 0.5 bar dynamicMax inlet temperature 65°CInlet connections G½˝ BSP

INTA WALL MOUNTED FIXED BASIN SPOUT TAP 5161CPMax operating pressure 10 bar staticMin operating pressure 0.5 bar dynamicMax inlet temperature 65°CInlet connections G½˝ BSP

INTA BASIN MOUNTED FIXED CAST SPOUT TAP 5163CPMax operating pressure 10 bar staticMin operating pressure 0.5 bar dynamicMax inlet temperature 65°CInlet connections G½˝ BSP

INTA BASIN MOUNTED SWIVEL TUBE SPOUT TAP 5162CPMax operating pressure 10 bar staticMin operating pressure 0.5 bar dynamicMax inlet temperature 65°CInlet connections G½˝ BSP

INTA WALL MOUNTED FIXED MINIMALISTIC SPOUT TAP 5164CPMax operating pressure 10 bar staticMin operating pressure 0.5 bar dynamicMax inlet temperature 65°CInlt connections G½˝ BSP

Ø26

160

65

Ø65

12


16223

61

85

125

57

24

150

160

9

36

57

77

1559

38


THE KNEE/PEDAL TAPS RANGE

Knee and pedal operated taps are easy to install and durable. Ideal for commercial kitchens, hospitals, and applications where delivery of water is necessary in a controlled and hygienic way.

KNEE/PEDAL TAPS

91.

INTA FLOOR MOUNTED VALVEwith multi directional lever


inta floor mounted valve with multi directional lever LO800CP £104.78

INTA FOOT OPERATED FLOOR MOUNTED MIXING VALVEwith stop for continuous flow


inta foot operated floor mounted mixing valvewith stop for continuous flow

LO801CP £266.89

INTA FOOT OPERATED FLOOR MOUNTED VALVEDESCRIPTION CODE PRICE

inta foot operated floor mounted valve LO802CP £107.33

INTA FOOT OPERATED FLOOR MOUNTED MIXING VALVEDESCRIPTION CODE PRICE

inta foot operated floor mounted mixing valve LO803CP £180.03

INTA FOOT OPERATED WALL MOUNTED VALVEDESCRIPTION CODE PRICE

inta foot operated wall mounted valve LO804CP £138.60

INTA FOOT OPERATED WALL MOUNTED MIXING VALVEDESCRIPTION CODE PRICE

inta foot operated wall mounted mixing valve LO805CP £252.45

KNEE/PEDAL TAPS



INTA KNEE OPERATED EXPOSED VALVEwith 350mm lever


inta knee operated exposed valve with 350mm lever LO810CP £96.73

INTA KNEE OPERATED CONCEALED VALVEwith 350mm lever


inta knee operated exposed valve with 350mm lever LO820CP £85.33

KNEE/PEDAL TAPS

INTA FLOOR MOUNTED VALVE WITH MULTI DIRECTIONAL LEVER LO800CPMax inlet pressure 10 bar staticMin inlet pressure 0.5 bar dynamicMax inlet temperature 65°CTimed flow 15 ± 3 secondsInlet connetions G½˝ F BSPOutlet connetions G½˝ F BSP

INTA FOOT OPERATED FLOOR MOUNTED MIXING VALVE WITH STOP FOR CONTINUOUS FLOW LO801CPMax inlet pressure 10 bar staticMin inlet pressure 0.5 bar dynamicMax inlet temperature 65°CTimed flow 15 ± 3 secondsInlet connetions G½˝ F BSPOutlet connetions G½˝ F BSP

INTA FOOT OPERATED FLOOR MOUNTED MIXING VALVE LO803CPMax inlet pressure 10 bar staticMin inlet pressure 0.5 bar dynamicMax inlet temperature 65°CInlet connetions G½˝ F BSPOutlet connetions G½˝ F BSP

INTA FOOT OPERATED FLOOR MOUNTED VALVE LO802CPMax inlet pressure 5 barMin inlet pressure 0.5 barMax inlet temperature 65°CInlet connetions G½˝ F BSPOutlet connetions G½˝ F BSP

20015

62

104




225

225280

KNEE/PEDAL TAPS

INTA FOOT OPERATED WALL MOUNTED VALVE LO804CPMax inlet pressure 10 bar staticMin inlet pressure 0.5 bar dynamicMax inlet temperature 65°CInlet connetions G½˝ F BSPOutlet connetions G½˝ F BSP

INTA FOOT OPERATED WALL MOUNTED MIXING VALVE LO805CPMax inlet pressure 10 bar staticMin inlet pressure 0.5 bar dynamicMax inlet temperature 65°CInlet connetions G½˝ F BSPOutlet connetions G½˝ F BSP

INTA KNEE OPERATED CONCEALED VALVEWITH 350MM LEVER LO820CPMax inlet pressure 10 barMin inlet pressure 0.5 barMax inlet temperature 65°CTimed flow 15 ± 3 seconds at 1 barInlet connetions 15mm compressionOutlet connetions 15mm compression

INTA KNEE OPERATED EXPOSED VALVE WITH 350MM LEVER LO810CPMax inlet pressure 10 barMin inlet pressure 0.5 barMax inlet temperature 65°CTimed flow 15 ± 3 seconds at 1 barInlet connetions 15mm compressionOutlet connetions 15mm compression


250

200

MIXER HOT/COLD

370


260

215

370

THE HTM64 HOSPITAL TAP RANGE

Issues of hygiene and flexibility are as important as product quality and durability. The Intatec healthcare product range has been specifically designed following extensive research into the needs of healthcare managers and

specifying professionals. This is a product range that combines innovation with practical attention to detail giving specifiers the total plumbing solution across all sectors of the healthcare market. Intatec leads the market with

products that enable healthcare managers to provide a safer environment for staff, patients and the general public.

HTM64

99.

HTM64 (TBH 2a)thermostatic sequential wall mounted tap


HTM64 (TBH 2a) thermostatic sequential wall mounted tap HTM09025CP.1 £345.99

HTM64 (TB H6)infrared thermostatic wall mounted tap


HTM64 (TB H6) infrared thermostatic wall mounted tap(battery operated)

HTM09030CP £741.37

HTM64 (TB H6) infrared thermostatic wall mounted tap(mains operated)

HTM09031CP £839.70

HTM64 (TBH 2a)thermostatic sequential extended wall mounted tap


HTM64 (TBH 2a) thermostatic sequential extended wall mounted tap

HTM09050CP £443.28

HTM64 (TBH 2a)thermostatic sequential extended deck mounted tap


HTM64 (TBH 2a) thermostatic sequential extended deck mounted tap

HTM09051CP £443.28

HTM64


TECHNOLOGY BUILT IN

TECHNOLOGY BUILT IN

TECHNOLOGY BUILT IN

TECHNOLOGY BUILT IN

HTM64 CODE HTM64 DESCRIPTION INTATEC CODE

TB H2a Hospital pattern integral thermostatic bib mixer tap HTM09025CP.1

TB H6Hospital pattern integral thermostatic bib mixer tap proximity

sensor, timed flow HTM9030CP / HTM9031CP

TP6 General basin ½˝ thermostatic mixer tap IT1001CP / IT1003CP

TPP1 General basin ½˝ self closing mixer NC230CP

TM1 Thermostatic shower mixer, flexible hose and handset 90032CP / LA014CP


HTM64

HTM64 (TBH 2a) THERMOSTATIC SEQUENTIAL WALL MOUNTED TAP HTM09025CPMax operating pressure 5 bar dynamicMin operating pressure 0.2 bar dynamicMax inlet temperature 85°CMin temperature differential to achieve hot or cold failsafe 10°C

Max pressure inlet differential 5:1Temperature stability ± 2°CInlet connections G½˝ BSP

HTM64 (TB H6) INFRARED THERMOSTATIC WALL MOUNTED TAP HTM09030CP/ HTM09031CPMax operating pressure 5 bar dynamicMin operating pressure 1.0 bar dynamicMax inlet temperature 85°CMin temperature differential to achieve hot or cold failsafe 10°C


HTM64 (TBH 2a) THERMOSTATIC SEQUENTIAL EXTENDED DECK MOUNTED TAP HTM09051CPMax operating pressure 5 bar dynamicMin operating pressure 0.2 bar dynamicMax inlet temperature 85°CMin temperature differential to achieve hot or cold failsafe 10°C


HTM64 (TBH 2a) THERMOSTATIC SEQUENTIAL EXTENDED WALL MOUNTED TAP HTM09050CPMax operating pressure 5 bar dynamicMin operating pressure 0.2 bar dynamicMax inlet temperature 85°CMin temperature differential to achieve hot or cold failsafe 10°C


120

Ø55

9

220

225

Ø50

50

Ø50

120

Ø55

9Ø80

225

50

120

190

302

Ø55

200

Ø50

264

Ø30

220

120

190200

288

Ø55

200

169

Ø30

Ø50

220


THE INTAJET WASH STATION RANGE

Using a pre-rinse spray is essential in many commercial and professional establishments.

INTAJET

105.

INTAJET


INTA DECK MOUNTED WASH STATIONwith extended lever tap


kitchen wash station with dual jet spray 5280CP £259.86

INTA WALL MOUNTED WASH STATIONDESCRIPTION CODE PRICE

wall mounted wash station with extended lever tap (5260CP and 5286CP)

5296CP £515.17

wall mounted wash station with single lever tap(5260CP and 5280CP)

5298CP £444.38

wall mounted wash station with mono block(5260CP and 5283CP)

5297CP £506.18

wall mounted wash station with pull out spray 5260CP £440.08

wall mounted wash station with lever operated monoblock (5260CP and 5281CP)

5299CP £506.18

INTA DECK MOUNTED WASH STATIONDESCRIPTION CODE PRICE

deck mounted wash station with single lever tap(5270CP and 5282CP)

5275CP £489.72

deck mounted wash station with monoblock knob operated mixer (5270CP and 5283CP)

5278CP £537.45

deck mounted wash station with extended lever tap (5270CP and 5286CP)

5295CP £606.08

deck mounted wash station with pull out spray 5270CP £436.32

deck mounted wash station with lever operated monoblock (5270CP and 5281CP)

5294CP £537.45

INTA BASIN LEVER MIXERfor deck mounted wash station with pull out spray 5270CP


inta basin lever mixer for deck mounted wash station with pull out spray 5270CP

5286CP £179.75

BASIN SINGLE HOLE/SINGLE LEVER OPERATED DECK MOUNTED TAPDESCRIPTION CODE PRICE

basin single hole/single lever operated deck mounted tap 5282CP £59.60

BASIN MONOBLOCK KNOB OPERATED MIXER TAPwith non return valves


basin monoblock knob operated mixer tap with non return valves

5283CP £107.35

basin monoblock lever operated mixer with non return valves 5281CP £107.35

5260CP

5270CP


INTAJET

INTA DECK MOUNTED WASH STATION WITH EXTENDED LEVER TAP 5295CPMax inlet pressure 5 bar staticMin operating pressure 0.5 bar dynamicMax inlet temperature 65°C

INTA WALL MOUNTED WASH STATION WITH EXTENDED LEVER TAP 5260CPMax inlet pressure 5 bar staticMin operating pressure 0.5 bar dynamicMax inlet temperature 65°C

BASIN LEVER MIXER 5286CPMax inlet pressure 5 barMin operating pressure 0.5 barMax inlet temperature 65°C

SINGLE HOLE/SINGLE LEVER OPERATED DECK MOUNTED TAP 5282CPMax inlet pressure 5 barMin operating pressure 0.5 barMax inlet temperature 65°C

BASIN MONOBLOCK LEVER OPERATED MIXER WITH NON RETURN VALVE 5281CP Max inlet pressure 5 barMin operating pressure 0.5 barMax inlet temperature 65°C

~900 85

A

18

~900

A

18

225

75

130

62

88

50

62


THE DECORATIVE RADIATOR VALVE RANGE

Finish off your new bath or shower room with the Inta range of decorative radiator valves.

RADIATOR VALVES111.

MINIMALISTICdecorative radiator valves


minimalistic straight decorative radiator valve 1022CP £18.89

minimalistic angled decorative radiator valve 1023CP £18.89

MODERNdecorative radiator valves


modern straight decorative radiator valve 1024CP £15.74

modern angled decorative radiator valve 1025CP £15.74

RADIATOR VALVES

MINIMALISTIC ANGLED DECORATIVE RADIATOR VALVE 1022CP

MODERN STRAIGHT DECORATIVE RADIATOR VALVE 1024CP

15

15


MINIMALISTIC STRAIGHT DECORATIVE RADIATOR VALVE 1023CP

MODERN STRAIGHT DECORATIVE RADIATOR VALVE 1025CP

15

15



E&OE.

GENERAL INFORMATION

OFFICE HOURS Monday to Friday, 8.30 am to 5.00 pmPRICES Prices are exclusive of VAT, and are subject to change without notice. All prices displayed are recognised as list.TERMS A copy of Intatec’s terms and conditions is available on request.PROPERTY OF GOODS Until full payment is received, all goods supplied remain the property of Intatec Limited.ORDERING There is no minimum order value.DELIVERY Carriage paid 3 day service, UK mainland only. Overnight delivery available at extra cost: Please enquire at time of ordering. CUSTOMER CARE NOTICE In warranty claims and authorised good stock returns. • Collectedandprocessedwithin28daysofwrittennotification. • Warrantyforshowermixers,andbath/showermixersis5yearsfromthedateofpurchaseand is limited to replacement (product) value only. • Pleasenoterehandlingchargesareapplicableongoodstockreturns. IMPORTANT NOTES • Astandardrehandlingchargeof20%ofnettvalueofproductauthorisedforgoodstockreturns. • GoodsreturnedtoIntatecLimitedwithoutauthorisationorcorrectpaperwork,maynotbe accepted for processing. • Warrantyclaimsaresubjecttoproofthattheproducthasbeencorrectlyinstalled,inaccordance with the installation instructions and good working practice. • Warrantyclaimsexceeding£50.00canonlybeauthorisedbytheIntateccustomercare department. • Warrantycards,partofwhichshouldbereturnedtoIntatecLimited,areenclosedwithall shower and bath/shower mixers. • Aspartofourqualityprocedure,wevalidateawarrantyclaimbyproducttestprocedures. • Allshortagesanddamagesondeliverymustbeadvisedwithin3daysofreceiptofgoods. • Intatecreservestherighttosubstituteorchangeanyproductwithoutnotice.

G3 Compliant Products

Part

Sect

ion

Building Regulations

THE SHOWER COLLECTION.ONLY INTA HAS THE COMPLETE

FOR BUILDING REGULATION WE’VE GOT THE COMPLETE RANGE

L-MIX UNDER BATH MIXING VALVE

Part G Legislation came into force April 2010.

“The hot water supply temperature to a bath should be limited to a maximum of 48°C by use of an in-line blending valve or

other appropriate temperature control device, with a maximum temperature stop and a suitable arrangement of pipework.”

THIS MEANS ALL NEW BATHS MUST

BE THERMOSTATICALLY PROTECTEDIn order to comply with this new building legislation, Intatec, the

anti scald specialists, have a range of solutions which comply with BS EN1111 and BS EN1287 for under and over the bath.

TECHNOLOGY BUILT IN

SULIS THERMOSTATIC BATH SHOWER MIXER

TECHNOLOGY BUILT IN

RANGEFor our complete collection of anti scald and G3 compliant

products please call 01889 272180 for a

free copy of our shower collection brochure.

For more information please visit our web site

WWW.INTATEC.CO.UK | WWW.ANTISCALD.CO.UK

AIRFIELD INDUSTRIAL ESTATE, HIXON, STAFFORD, ST18 0PFT. 01889 272180 F. 01889 272181 E. [email protected]

WWW.INTATEC.CO.UK | WWW.ANTISCALD.CO.UK

IT’S ALL IN THE NAME.

inta commercial collection april 2011

Documents