instructions for dp approval slides i plots: – fonts large for readability standard fonts : –...
TRANSCRIPT
Instructions for DP Approval Slides I• Plots:
– Fonts• Large for readability• Standard fonts :
– Arial , Times New Roman, or similar
– Do not use Comic Sans MS
– Add “Preliminary” label• CMS Preliminary MC • CMS Preliminary 2009 900
GeV etc• Date
– Label Axes and units. E.g.• E [GeV]• pT [GeV/c]
• M [GeV/c2]
• Plot Captions:– In a separate text box include
a very succinct summary of the key info
– Include also:• Contact person/email• Link to talk given for the
approval• Link to more detailed
information on event selection etc.
• Link to a reasonably high resolution copy of the plot(s) in useful formats like jpeg or gif and eps
• Date of plot if not on plot
Instructions for DP Approval Slides II• Event displays:
– Include 2 copies of each display – one with dark and one with light background
– Include • CMS Experiment at the LHC, CERN• Date Recorded• Run/Event • One line description (optional)
– Fonts (same as for plots)• Large for readability• Standard fonts :
– Arial , Times New Roman, or similar
– Do not use Comic Sans MS
• Include information regarding the displays in a separate text box or separate slide.
– Label info box or slide with run/event number
– Contact person/email– Include succinct description of
display– Link to talk given for the approval– Include link to more detailed info
when necessary– Include link to high resolution jpeg or
other standard electronic format of display
Instructions for DP Approval Slides III• Multiple plots and or
displays:– When several plots and
displays are shown from a single analysis, all the information about the plots and displays could be condensed on a single slide following the instructions on the previous pages
• Examples are given in the next few slides
Tracking PT
• Information– Contact: Thomas Speer
[email protected] – Presented for approval
December 16, 2010• http://indico.cern.ch/conferenceDisplay.py?
confId=76852
– Events with 5 to 100 tracks • Tracks with "highPurity" flag
– at lease 8 hits – relative error on pT < 10%
• No cut on or pT • More details of the analyses for
Tracking results in this and next slide are found at
– https://twiki.cern.ch/twiki/bin/viewauth/CMS/TRKApprovedResults900GeV
– High resolution copies of plots are available at the same link
(GeV/c)
Data samples and cuts: Slides 6-8 Contact Mikko Voutilainen [email protected] Presented for approval december 16, 2010 see: http://indico.cern.ch/conferenceDisplay.py?confId=76852 Minimum Bias @900 GeV and 2.36 TeV re-reconstructed with CMSSW 3.3.2 and new beam spot (prompt reco,
official PD, SD and P. Janot's PF skim) Require technical bit 40||41, BSC hits, Physics Declared Good vertex with ntracks>1 & |z_vtx|<20cm, “halo” removal Look at two leading JEC-corrected jets with DeltaPhi(jet1,jet2) > 2.1 passing loose JetID at |eta| < 2.4 and
pT(corr) > 10 GeV
Loose JetID for CaloJets
EMF>0.01 (!HCAL noise)
fHPD<0.98 (!HCAL noise)
Loose JetID for PFJets
ChargedMultiplicity>0 (track-confirmed)
ChargedHadronFraction>0
NeutralHadronFraction<1 (!HCAL noise)
NeutralEmFraction<1 (!photon, !ECAL noise)
ChargedEmFraction<1 (!electron)
Good Runs for JETS:123596, 123615, 123732, 123815, 123818, 124006, 124009, 124017, 124018, 124019, 124020, 124021, 124022, 124023, 124024, 124025, 124028, 124029
Good Runs for MET:124020, 124022, 124023
Multijet at 2.36 TeV
PFJet 1 of 29.9 GeV
PFJet 3 of 13.3 GeV
PFJet 2 of 24.2 GeV
* Contains a candidate (see subsequent slides)
Multijet at 2.36 TeV
PFJet 1 of 29.9 GeV
PFJet 3 of 13.3 GeV
PFJet 2 of 24.2 GeV
PFJet 1 of 29.9 GeV
PFJet 3 of 13.3 GeV
PFJet 2 of 24.2 GeV
Dijet events - Calorimeter
(GeV/c)