installation & operation guide...page 3 note: for installation on doors with pre-drilled holes...
TRANSCRIPT
Page 1
Model DDBKP
Read this manual carefully before installing and operating!
ENGLISH
Installation & Operation Guide
Digital Deadbolt
Page 2
IndexINSTALLATION INSTRUCTIONS
Package Contents / Tools Required..........................................................
Prepare Door and Jamb.............................................................................
Adjusting Deadbolt Latch Set..................................................................
Installing Deadbolt Latch Set.....................................................................
Installing Exterior Assembly........................................................................
Installing Interior Assembly........................................................................
OPERATION INSTRUCTIONS
Digital Keypad Overview.............................................................................
Locking and Unlocking / Changing Programming Code / Adding User Codes......................................................................................
Deleting User Codes / Automatic Lock Function / Sound On and Off........................................................................................
Secure Lock-out Period / Restore Factory Settings / Low Battery Warning / Consumer Friendly Message Guide....................
Installation Trouble Shooting...............................................................
Customer Service........................................................................................
Template....................................................................................................... Programming Record..................................................................................
Limited Warranty.................................................................................
Page 1
Page 2
Page 3
Page 4
Page 5
Page 6-8
Page 9
Page 10
Page 11
Page 12
Page 13
Page 14
Page 15-16
Page 17
BackCover
Page 1
INSTALLATION INSTRUCTIONS
Package Contents
Tools Required
Tools Required for Installation on Pre-drilled Doors:•PhillipsScrewdriver
Tools Required for Installation on Doors That Require Drilling:•Drill•TapeMeasure•Pencil•2-1/8”(54mm)DrillHoleSaw•1”(25mm)Drill•1/16”(2mm)Drill•Chisel•Hammer•PhillipsScrewdriver
DO NOT RETURN TO STORE! If any parts are missing or damaged, pleasecallCustomerServicetollfreeat1-877-354-5457(M-F7am–5pmPST)
Deadbolt Strike Plate
DeadboltLatchSet(Adjustable)2-3/8”(60mm)to2-3/4”(70mm)
5/16”(8mm)Screws-2ea. 1”(25mm)Screws-2ea.
3/4”(19mm)Screws-5ea. 1-3/8”(35mm)Screws-1ea.
InteriorAssembly
Mounting Plate
ExteriorAssembly
Entrykeys(2ea.)
Page 2
ADJUSTABLEDEADBOLTLATCHSET
NOTE: Deadbolt Latch Set is shipped with the backset set at 2-3/8” (60mm)Measurethebackset(backsetisdistancebetweenedgeofthedoorandthecenterofLock).
1. TO CONVERT FROM 2-3/8” (60mm) BACKSET TO 2-3/4” (70mm) BACKSET a.Holdlatchwithnumbersfacingforwardandthumbpressingonthebolt(Figure1a). b.Rotatethecylindercoverclockwise(Figure1b). c.Pullandtwisttheextensionplateallthewayout(Figure1c). d.Rotatethecylindercovercounterclockwisesothatthemarkingalignswith the2-3/4”(70mm)positionindicator(Figure1d).
2. TO CONVERT FROM 2-3/4” (70mm) BACKSET TO 2-3/8” (60mm) BACKSET a.Holdlatchwithnumbersfacingforwardandthumbpressingonthebolt(Figure2a).
b.Rotatethecylindercoverclockwise(Figure2b). c.Pushandtwisttheextensionplateallthewayin(Figure2c). d.Rotatethecylindercovercounterclockwisesothatthemarkingalignswith the2-3/8”(60mm)positionindicator(Figure2d).
Figure1a
Figure2a
Figure1b
Figure2b
Figure1c
Figure2c
Figure1d
Figure2d
Extension plate
Extension plate
Cylindricalcover
Cylindricalcover
Yourlatchisnowset2-3/8”(60mm)backset
Yourlatchisnowset2-3/4”(70mm)backset
2-3/8”(60mm)
2-3/8”(60mm)
2-3/4”(70mm)
2-3/4”(70mm)
2-3/8”(60mm)
NOTE: Do not extend Cylindrical Cover past 2-3/4” (70mm)
Page3
NOTE: For installation on doors with pre-drilled holes skip to page 4.
1. TEMPLATE a.Cutouttemplateprintedonpage15ofthisManual (Figure1a).
b. Foldtemplateandplaceondoor36”(925mm)from thegroundasmarked(Figure1b).
2. MARK THE DOOR FOR DRILLING b. Mark center hole on door edge through guide on templatefor1”(25mm)latchbolt(Figure2a). a. Mark center hole on door face through guide on templatefor2-3/8”(60mm)or2-3/4”(70mm) backset(Figure2b).
3. DRILL AND CHISEL DOOR a.Drill2-1/8”(54mm)holethroughdoorfaceasmarked forlockset(Figure3a). b.Drill1”(25mm)holeincenterofdooredgefor DeadboltLatchAssembly(Figure3b). c.InsertDeadboltLatchAssemblyinholekeepingit paralleltofaceofdoor.Markoutlineandremovelatch (Figure3c). d.Chisel1/8”(3mm)deeporuntillatchfaceisflush withdooredge(Figure3d).
4. MARK AND DRILL DOOR JAMB a. MarkcenterholeonedgeofjambevenwiththecenteroftheLatchBoltondoor edge.(Figure4a).
b.Drill1”(25mm)hole1-3/16”(30mm)deepindoorjamboncentermark (Figure4b).
c.OutlineoutsideedgesofStrikePlate(Figure4c). d.Chisel1/8”(3mm)deepforStrikePlateoruntilflush(Figure4d). e.InstallStrikePlateusingtwo3/4”(19mm).screwsprovided(Figure4e).
PREPAREDOORANDJAMB
Figure4a Figure4b Figure4c Figure4eFigure4d
NOTE: For Drive in Latch, drill hole size indicated on template and press until it is flush with door edge.
UP
Figure1a
Figure2a Figure2b
Figure3a
Figure3c
Figure1b
Figure3b
Figure3d
Page4
1. INSTALLING THE DEADBOLT LATCH SET (need phillips head screwdriver) a.InsertDeadboltLatchSetintodooredgeholewiththeword “UP”andthearrowontheextensionplatefacingUP.Cross shapedspindleconnectorwillbeatthebottomoftheDeadbolt LatchSet(Figure1a). b.Makesurethefaceplatesitsflushwiththedoor.Donotforce thelatchintothemortiseflush.Chiseloutexcessmaterialif
necessaryforaflushfit. c.Usingtwo3/4”(19mm).screwsprovided,screwthelatchintothe doorwithahandheldscrewdriver.DONOTOVERTIGHTEN.
2. IDENTIFYING YOUR DOOR HANDING Stand outside the door a.IfthehingesareontheleftyourdoorisLeftHanded(Figure2a). b.IfthehingesareontherightyourdoorisRightHanded(Figure2b).
NOTE: Deadbolt Latch must be retracted when installing
NOTE: You are standing outside the door
INSTALLINGDEADBOLTLATCHSET
OUT SWING DOOR IN SWING DOOR
Figure2a
Left Handed DoorHinges are on the left side
Left Handed DoorHinges are on the left side
Right Handed DoorHinges are on the right side
Right Handed DoorHinges are on the right side
Figure2b
Figure1a
Deadbolt Latch Extended
Deadbolt Latch Retracted
Page5
2. SECURING THE EXTERIOR ASSEMBLY TO THE DOOR a.Fromthesidemarked“Thissideagainst door”,routetheControlWirethroughthe rectangular slot in the Mounting Plate (Figure2a). b.PlaceMountingPlateagainstdoorwithtailpiecepassing throughthecenterholeinthethreeholeset(Figure2b). c.SecuretheMountingPlatetotheExteriorAssemblyusing two1”(25mm)Screws(Figure2c). d.HandtightenwithaPhillipsScrewdriverleavinglooselyconnected(Figure2d). e. Check that the Rubber Gasket is properly aligned and correct as necessary (Figure2e). f.Checkverticalalignmentofthelock(Figure2f). g.TightensecurelywithahandheldPhillipsScrewdriver.DO NOT OVER TIGHTEN
3. OPTIONAL INSTALLATION a.Usinga1/16”(2mm)drillbit,drillapilotholeinyourdoorusingthe MountingPlateupperholeasaguide(Figure3a). b. Insert one 3/4”(19mm)screwandtighten.
1. INSTALLING THE EXTERIOR ASSEMBLY WorkwiththeDoorOpenforeasyaccess. a.UnpacktheExteriorAssembly.Usecaretonotscratchthegreencircuitboard
during handling and installation. b.CheckthattheRubberGasketisproperlyseatedontheExteriorAssembly (Figure1a).
c.InserttheExteriorAssemblyontothedoorwiththetailpiecegoingthroughthe Deadbolt Latch Set cross shaped spindle connector in the VERTICAL POSITION. RoutetheControlWirethroughthedoorovertheDeadboltLatchSet(Figure1b).
NOTE: Deadbolt Latch must be retracted when installing NOTE: Tailpiece must be positioned vertically
NOTE: You are standing outside the door
INSTALLINGEXTERIORASSEMBLY
Right handed door view
Rubber Gasket
Control Wire
Tailpiece(Vertical)
Latch Hole
Mounting Plate3/4”(19mm)screw(OptionalInstallation)
1”(25mm)screws
Control Wire
Figure1a Figure1b
Figure3a
Figure2a-2f
NOTE: Lock and unlock using the key to see if the Deadbolt Latch is opening and closing easily.
Page6
INSTALLINGINTERIORASSEMBLY
1. SET THE ENTRY SWITCH FOR LEFT OR RIGHT HANDED DOOR a.Gentlymovetheswitchto“L”forLeftHandedDoor(Figure1a). b.GentlymovetheSwitchto“R”forRightHandedDoor(Figure1b).
2. SET THE INTERIOR KNOB POSITION FOR LEFT OR RIGHT HAND HINGED DOORS a.TheInteriorKnobgoesintheVerticalpositionforRightHandedDoors(Figure2a). b.TheInteriorKnobgoesintheHorizontalpositionforLeftHandedDoors(Figure2b).
3. ATTACH THE CONTROL WIRE TO THE INTERIOR ASSEMBLY a.UsecaretoattachtheControlWiremaleplugtotheInteriorAssemblyfemale socket connector. b.DonotforcetheControlWiremaleplugintotheInteriorAssemblyfemale socket connector. c.TheControlWiremaleplughastwoalignmenttabsonthesmoothsideofthe plugwhichisthetopoftheplug. d.TheControlWiremaleplugisinsertedwiththesmoothsideupintotheInterior Assemblyfemalesocketconnector.
NOTE: Make sure deadbolt Latch is retracted
Left Handed Door(Horizontal)
Entry Switch(Left or Right)
Right Handed Door(Vertical)
UnpacktheInteriorAssembly.Removethebatterycoverbyslidingthecoverupward.LocatethescrewsholdingtheMountingPlatetotheInteriorAssembly.RemovethescrewstoreleasetheMountingPlatefromtheInteriorAssembly.
Figure1a-1b
Figure2a-2b
Page7
INSTALLINGINTERIORASSEMBLY(CONT.)
4. ATTACH THE INTERIOR ASSEMBLY TO DOOR a.PositiontheInteriorAssemblyoverthetailpieceandpushtheInteriorAssembly againstthedoor(Figure4a).
b.Usingtwo5/16”(8mm)screws and one 1-3/8”(35mm)screw, attach theInteriorAssemblytotheMountingPlate.DO NOT OVER TIGHTEN SCREWS
(Figure4b).
5/16”(8mm)screws
1-3/8”(35mm)screw
NOTE: Lock and unlock using Interior Knob to see if the latch is opening and closing easily.
INSTALLATION OVERVIEW
Strike Plate
BatteryCover
InteriorAssembly
Key
ExteriorAssembly
Rubber Gasket
Mounting Plate
Latch
5/16”(8mm)screws
Optional 3/4”(19mm)screw
3/4”(19mm)screws
1-3/8”(35mm)screws
1”(25mm)Screw
Figure4a-4b
Page8
INSTALLINGINTERIORASSEMBLY(CONT.)
5. Installing Batteries a.Insert4AAhighqualityAlkalinebatteriesintotheBatteryCompartmentinthe directionnoted+/-ontheCompartment.TheLockwillbeep2times,thekeypad willilluminateblue,andtheHoneywellbuttonwillflashgreentwicetosignifythat ithasreceivedpower(Figure5a).
b.SlidetheBatteryCoverdownintothetrackontheInteriorAssemblytocoverthebatteries(Figure5b).
6. Testing Lock With the Door Open a.TesttheLockusingtheinteriorKnob.Theboltshouldmovesmoothly. b.TestthelockusingtheKeypad.Tolockpressandthenpress“1234” to unlock.
OverrideAccessKey
ExteriorAssembly InteriorAssembly
Interior Knob
Battery Cover
Light Indicator
Keypad
NOTE: Do not touch the keypad until the blue light turns off.Do not use rechargeable batteries or non-alkaline batteries.
Figure5a-5b
Page9
OPERATION INSTRUCTIONS
ExteriorAssemblyOverview
Indicator light
Green •IndicatesSuccessfulProgrammingStep•IndicatesUnlockingisSuccessfulRed •IndicatesFailedProgrammingStep•IndicatesLockingisSuccessful
Electronic lock requires (4) High Quality AA Alkaline batteries. When all 4 batteries are installed in the correct position, hear 2 beeps and the keypad will illuminate blue. DO NOT TOUCH the keypad until the keypad stops illuminating.
Lock-UsedtolockdoorClear -Usedtoclearwrongkeypadentries
Unlock-UsedtounlockdoorProgramming -Usedinprogrammingsteps
5 Seconds -Completealltheprogrammingstepsintheprogrammingmodewithin5seconds.
Clear -Usethekeytoclearentriesincaseawrongbuttonispushed.
Lock button
Unlock button
FactorySettings
The lock comes factory preset with a:
Please change the ProgrammingCode and the User Codeas soon as possible after installation to insure security.
Programming code - 123456
User code - 1234
User ID - 01ID
PC
PC
UC
UC
Batteries(notincluded)
Programming Symbols
Lock/Clear
Unlock/Programming
Programming Code
User Code (4-8 digits)
User ID (01-50, 2 digits) ID
PC
UC
Programming Tips
Page10
TO UNLOCK THE LOCKUsingKeypad:EnteravalidUserCode(defaultcodeis1234)andpressandhear1 beep and lights green.
TO LOCK THE LOCKUsing Keypad: Press and then hear 2 beeps and lights red.
CHANGECURRENTORPRESETPROGRAMINGCODEFactorydefaultProgrammingCode=123456,thisisthemasterpasswordforyourlock.Allprogrammingfunctionsrequirethiscode.FollowthebelowsequencetochangetheProgrammingCodetoyourcustom6digitcombination.
TOADDANEWUSERCODE(youcanaddupto50newusercodes)TheUserCodemustbea4-8digitcombination.EachUserCodeisthenlinkedtoaUserID(whichisanynumberbetween01-50)toidentifyanindividualUserCode.(UserID1-9shouldbeenteredas01-09sotheyare2digits).
Hear 1 beep and Light Indicator illuminates greenRecordNewandChangedCodesonProgrammingRecordlocatedonPage17
Hear 1 beep and Light Indicator illuminates green
NOTE:WhenaNEWUSERCODEisset,thedefaultfactorycode(1234)isdeletedfor safety.
RecordNewandChangedCodesonProgrammingRecordlocatedonPage17
123456 08 56785678
Forexample:toaddtheUserID-08toUserCode-5678,enterthefollowing:
4newRe-enter
1Re-enter
Locking and Unlocking
Changing Programming Code
AddingUserCodes
ID
ID
ID
UC UC
UC UC
UC
PC
PC
PC PC
PC
PC
PC
Page 11
DELETE ONE EXISTING OR PRESET USER CODETheunitcomeswithafactoryUserID=01forUserCode=1234.IMPORTANT:Todelete1UserCode,thelockmusthavemorethan1UserCodein its database.
SET OR CANCEL AUTO LOCK You can set the lock to automatically close after each time the lock is opened. Time valuerange=20-900seconds,enterthefollowing:
Youcan“mute”orturnthe“soundon”onyourlockbyenteringthefollowing.(Factorysettingissoundon).
DELETE ALL USER CODESIMPORTANT:thiswilldeletetheusercodesbutnottheprogrammingcode,enterthefollowing
Hear 1 beep and Light Indicator illuminates green
SetAutoLock:
Hear 1 beep and Light Indicator illuminates green
SoundOff(1)-LightIndicatorilluminatesgreenSoundOn(2)-Hear1beepandLightIndicatorilluminatesgreen
To cancel Auto Lock set the time to 00, enter the following:
CancelTimeValueAutoLock:
Hear 1 beep and Light Indicator illuminates green
Hear 1 beep and Light Indicator illuminates green
2Existing re-enter
5TimeValue
61or2
500
3re-enter
Deleting User Codes
AutomaticLockFunction
Sound On and Off
PC
PC
PC
PC
PC PC
ID UC
UCUC
ID ID
1=SoundOff2=SoundOn
Page 12
WarningsoundsandLEDflashesredafter4incorrectcodeattempts:Keypadshutsdownfor30seconds.
To reset the lock to the original factory settings including the Programming Code andallUserCodesremoveonebatteryfor10seconds.Reinsertthebatteryandwaitforalongandshortbeep.Press3timeswithin3seconds.Thelockwillbeepandthelightindicatorwillturngreen.
BeepsandLEDflashesredfor5seconds.Pleasereplacewithgoodqualityalkaline batteries.Note:RomovingbatteriesdoesnoteraseactiveProgrammingorUserCodes.
NOTE:Whenbatteryisunderlowvoltage,thelockwillgivethe(LowBatteryWarning:BeepsandLEDashesredfor5seconds).Duringthistimeyourlockcanstillwork.Howeveroncethevoltageislowerthan4.3V(calledSuper-LowVoltage),theoperationofthelockingandunlockingwillnotwork,usermustreplacebatteriesimmediately.
Secure Lock out Period
RestoreFactorySettings
LowBatteryWarning
ConsumerFriendlyMessageGuide
UC
PC
Unlock/Validprogramming: 1 long beep and LED illuminates green
Lock: 2 short beeps and LED illuminates red
InvalidProgramming: 2shortbeepsandLEDflashesredtwice
LowVoltage: Beepsfor5seconds(7/9timesdependsonoperationisunlock/lock)
SuperLowVoltage: 4shortbeepsandLEDashesredfourtimes
4Incorrectcodeentryattempts: 2 short beeps and LED illuminates red each attempt
Poweron: 1 long beep and 1 short beep and LED illuminates green
Chip Reset: 1 long beep and 1 short beep and LED illuminates green (mayoccurseveraltimesoronceinawhile)
Lock Error: 3longbeepsLEDashesredthreetimes
Repeat operation after Lock Error: 2 short beeps three times LED ashes red six times
Page13
INSTALLATIONTROUBLESHOOTING
Issue Solution
LatchWorkingBackwards-Lockunlockswhenlockbutton is pushed or locks whenunlockbuttonorcodeispushed.
Directionswitchissettoincorrectsetting.RemovetheInteriorAssemblyandmovetheswitchtotheoppositedirection.•Checkthatyourswitchissetinthecorrect
position Left or Right Handed door.If Correct•RotateTurnknobandreinstallInteriorAssembly.RetestagainwhileholdingInteriorAssemblyinplace.
InteriorAssemblyknobwillnot turn.
Knoborverticaltailpieceisinstalledinincorrectposition.RemoveInteriorAssem-bly and reposition the Interior Knob. With the DeadboltLatchretractedverifythatthetailpieceisvertical.
Lockwillnotfunctionelectronically.
•CheckthatallbatteriesarefreshhighqualityAlkalineBatteries.•Checkforproperpolarity(+-)ofallbatteries.•CheckthattheControlWireisattachedtotheInteriorAssembly.
Lockgiveserrorsignalwhenopening or locking and Dead-boltLatchwillnotextendorretractcompletelywhendooris closed.
Unlock door using key or interior knob. While door is open, check that the Deadbolt Latch operates smoothly. Check for proper alignment ofthestrikeplate,adjustasneededtoassurethere is no binding against the Deadbolt Latch.
Deadbolt Latch is sticking. Installationscrewsofthelockmaybetootightandhavetobeloosened.•RemoveInteriorAssembly.•SlightlyloosentheMountingPlatescrews.•LockandunlockusingtheKey.•ReattachControlWireandInteriorAssembly.
Page14
EMAIL:[email protected]
WEBSITE:www.honeywellsafes.com
ADDRESS:ConsumerAssistanceDept.LHLicensedProducts,Inc.860EastSandhillAvenueCarson,CA90746USA
TELEPHONE:US/Canada1-877-354-5457(TollFree)
Mexico01-800-288-2872AfterEnglishvoicerecordingstopsyoumustthenenter800-860-1677tocompleteyourcall.(TollFree)
Australia0011-800-5325-7000(TollFree)
Germany/NewZealand00-800-5325-7000(TollFree)
OtherCountriesXX*-310-323-5722(TollChargesApply)XX*-DialU.S.CountryCodefirst
CALLCENTERHOURS:US/Canada7am–5pm(PST**)Mon–Fri(Subjecttochange)CALLBACKHOURS:OtherCountries7am–8pm(PST**)Mon–Fri(Subjecttochange)PST**-LocaltimeinLosAngeles,CA,USA INTERNATIONALCALLBACKHOURS:IfyouneedtospeakwithaconsumerassistantandcannotcontactusduringtheCallCenterhoursabove,pleasesendanemailorleaveatelephonemessage,includingyourName, Telephone Number and the best time for us to contact you during the Call Back hoursaboveandwewillmakeoureveryefforttocontactyouandhelpansweranyofyour questions or concerns.
*InsertcorrectCountryCode**LocalTimebasedonLosAngelesCaliforniaUSA
CONSUMERASSISTANCE
Page15
2-3/
8” (6
0mm
) BA
CK
SET
2-3/
4” (7
0mm
) BA
CK
SET
THENDRILL1”(25mm)HOLE
INCENTERDOOROFEDGE
2”(50mm)INDEPTH
MARK
FOR1-3/4”
(45mm)
DO
OR
DR
ILL
2-1/8”(54mm)
HO
LE
MARK
FOR1-3/8”
(35mm)
DO
OR
IMP
OR
TANT!
PLACETEMPLATE
ONHIGHEDGEOF
DOORBEVEL
Page16
BACK OF TEMPLATE
Page17
My Codes: Date Created
ProgrammingCode (6digits)//
UserCode01 (4-8digits)//
UserCode02 (4-8digits)//
UserCode03 (4-8digits)//
UserCode04 (4-8digits)//
UserCode05 (4-8digits)//
UserCode06 (4-8digits)//
UserCode07 (4-8digits)//
UserCode08 (4-8digits)//
UserCode09 (4-8digits)//
UserCode10 (4-8digits)//
UserCode11 (4-8digits)//
UserCode12 (4-8digits)//
UserCode13 (4-8digits)//
UserCode14 (4-8digits)//
UserCode15 (4-8digits)//
UserCode16 (4-8digits)//
UserCode17 (4-8digits)//
UserCode18 (4-8digits)//
UserCode19 (4-8digits)//
UserCode20 (4-8digits)//
UserCode21 (4-8digits)//
UserCode22 (4-8digits)//
UserCode23 (4-8digits)//
UserCode24 (4-8digits)//
UserCode25 (4-8digits)//
Programming Record
Page18
TheHoneywellTrademarkisusedunderlicensefromHoneywellInternationalInc.HoneywellInternationalInc.makesnorepresentationsorwarrantieswithrespecttothisproduct.
MDDBKPE-20160115www.honeywellsafes.com
Manufactured by:LH Licensed Products, Inc. 860EastSandhillAvenueCarson,CA90746
Lifetime Mechanical and Finish Warranty / 1 Year Limited Electronics Warranty
Thisproductcomeswithalifetimemechanicalandfinishwarrantyandaoneyearlimitedelectronicswarrantytotheoriginalresidentialconsumeragainstdefectsinmaterialandworkmanshipundernormaluseaslongastheoriginalresidentialpurchaseroccupiestheresidentialpremisesuponwhichtheproductwasoriginallyinstalled.
ORIGINALRESIDENTIALCONSUMERThiswarrantyisnottransferable,andappliestotheoriginalpurchaseronly,aslongastheoriginalpurchaseroccupiestheresidentialpremisesuponwhichtheproduct(s)wasoriginallyinstalled.Proofofpurchase(originalsalesreceipt)andownershipmustaccompanyallwarrantyclaims.Allnon-homeownerpurchasers(includingpurchasersforindustrial,commercialandbusinessuse)arenotcoveredunderthetermsofthiswarranty.
WHATISNOTCOVEREDThiswarrantyisnullandvoidiftheproductwasusedforpurposesforwhichitwasnotdesigned.ThiswarrantyDOESNOTCOVERnormalwearandtearofpartsordamageresultingfromanyofthefollowing:negligentuse,misuseorabuseoftheproduct,orusecontrarytoorinviolationofwritteninstructionsprovidedbyLHLicensedProducts,Inc.Further,thiswarrantydoesnotcoverActsofGod,suchasfire,flood,hurricanesandtornadoes.ThiswarrantyDOESNOTCOVERscratches,abrasions,deteriorationduetotheuseofpaints,solventsoruseofcleanerscontainingabrasives,alcoholorothersolvents,whetherperformedbyacontractor,servicecompany,oryourself.ThiswarrantyDOESNOTCOVERproduct(s)usedincommercialapplications, used in common area applications, disassembly, repair or alteration by anyone other than LH Licensed Products, Inc., improper installation or exposure to extremes of heat or humidity. ThiswarrantyDOESNOTCOVERanylosses,injuriestopersonsorlossofproperty,generaldamagesorcosts,andshippingandfreightexpensesrequiredtoreturnproduct(s)toLH Licensed Products, Inc. LH Licensed Products, Inc. shall not be liable for any indirect, incidental or consequential damages of any nature relating to this lock. LH Licensed Products, Inc. isalsonotresponsibleforcostsassociatedwithremovingorreinstallingtheproduct.
ADDITIONALTERMSLH Licensed Products, Inc. does not authorize any person to create for it any obligation or liabilityinconnectionwiththeProduct.LHLicensedProducts,Inc.’smaximumliabilityhereunder is limited to the original purchase price of the Product. No action arising out of any claimed breachofthiswarrantybyLHLicensedProducts,Inc.maybebroughtbytheoriginalresidentialpurchasermorethanone(1)yearafterthecauseofactionhasarisen.