installation of securew2 software for ne - unknown

7/30/2019 Installation of SecureW2 Software for Ne - Unknown

http://slidepdf.com/reader/full/installation-of-securew2-software-for-ne-unknown 1/32

Installation of SecureW2 software for Network

connection

Supported OS

Window XP

Window Vista

Window 7

Window 2000

Window 2003

Lets’ Start

•

Double Click on UIC_SecureW2.exe

1

STEP-1 Download the Radius-UIC SecureW2 software.

STEP-2 Installation of Radius-UIC SecureW2 software.



• Click OK

• Click NEXT

2



• Click I Agree

• Check the components TTLS 4.1.0 & GTC 1.1.0,

Then Click Install

• Write in SecureW2 configuration window

UIC NetID : user3



Common password : 123

Re-enter password : 123

• Then Click OK [note: - If this window doesn’t appear

then directly click finish in the next step to complete the

installation.]

• Click Finish

• Now make Your DESKTOP/LAPTOP Reboot

4



• Right Click on My Network Place, Then click on

properties.

• If you are Wireless user continuous with page 6

• If you are LAN (Wired) user then goto page number 20

• Wireless user-- Right click on wireless network

connection, Then click on properties

5

STEP – 3 Configuring Your

Desktop/Laptop for Network

Connection



• Click on Internet protocol (TCP/IP), Then click on

properties

• Check the components obtain an ip address

automatically & obtain DNS server address

automatically, Then click Ok

6



• Click on Wireless Networks Tab

• Check the components use windows to configure my

wireless network setting

7



• Double click on your access point

8



• Click on Network Authentication drop down menu &

select WPA2

• Click on Data encryption drop down menu & select

TKIP

9



• Click on authentication Tab

• Click on EAP Type drop down menu & select SecureW2

EAP-TTLS

10



• Check the components authenticate as computer

when computer information is available

• Click on EAP Type properties

11



• Click on configure Tab of SecureW2 configuration

window

12



• Click on connect Tab—uncheck the use alternate outer

identity

• Click on Certificates Tab – Uncheck the verify server

certificates

13



• Click on Authentication Tab, Then select

authentication method drop down menu & select PAP

14



• Click on User account Tab, Then check the

components prompt user of credentials

• Click on Advance Tab, Then check the components

Allow users to setup new connections

15



• Now finish your configuration, click OK close your all

window

• Again Go to my network place-> right click on my

network place -> right click on wireless network

connection -> click on view available wireless

networks

16



• Click on Refresh network list

• Select your access point, then click on connect

button

17



• Click on color point “Wireless Network connection”18



• When you click on “Wireless Network connect” you

have appear a window for you user name and

password, Now you put cyberoam/NITRKL mail user

name & password-> then click ok

• NOTE- Domain not required

19



• Wired [LAN] user-- Right click on Local Area

connection, Then click on properties

20



• Click on Internet protocol (TCP/IP), Then click on

properties

• Check the components obtain an IP address

automatically & obtain DNS server address

automatically, Then click Ok

21



note: - In the Local Area Connection Properties

window there should be a authentication tab after

general tab. If it’s not present as in this picture

shown above then do the following.

1. Goto start->run or press window+R to open the run

window.

2. Type services.msc and press OK to open the

Services window.

22



3. Scroll down to ‘Wired AutoConfig’ service and right

click on it and click on properties.

23



4. Click on the startup type drop down box and select

automatic. Now, press the start button and the OK

24



button and close the Services window.

25



• Now, again right click on Local Area Connection, then

properties.

• Click on Authentication tab and select SecureW2 EAP-

TTLS from the drop down box.

• Click on the Settings button to open the SecureW2

Configuration window.

26



• Click on configure Tab of SecureW2 configuration

window

27



• Click on connect Tab—uncheck the use alternate outer

identity

28



• Click on Certificates Tab – Uncheck the verify server

certificates

29



• Click on Authentication Tab, Then select

authentication method drop down menu & select PAP

• Click on User account Tab, then uncheck the

components prompt user for credentials and now put

your cyberoam/NITRKL mail user name & password.

30



• NOTE- Domain not required.

• Click on Advance button, then check the components

Allow users to setup new connections

• Now finish your configuration by clicking OK thrice to

close all windows.31



******************

installation of securew2 software for ne - unknown

Documents