Install Domain Controller and DNS server in the new server .Edited and tested by : QuangTM

Install Domain Controller

At the Run box, type dcpromoand then press enter

At the Active DirectoryInstallation click next

At the next windows, click next

Check the Domain Controllerfor a new domain box clicknext

Check the Domain in a newforest and click next

Give the full DNS name andclick next. Ex : dc02.com.vn

Give the NetBIOS name andclick next. Ex : DC02

In the next windows, click nextto make dafault Database andlog folder path, click next tocontinue

Click next to make dafaultshared folder location

At the DNS RegistrationDiagnostics, check Install andconfigure DNS server on thisserver….and click next

At the next step, check thePermissions compatible onlywith windows 2000 or windows2003…click next to continue

Give the resotore modepassword and click next

Click next and wait until theinstallation completed

When the installationcompleted, click Restart now torestart the server

Configure the DNS server

The first step is set thePreferred DNS server tothe IP address of server.Ex : 192.168.1.2

Open AdministrativeTools and open theDNS. Right click on theReverse Lookup Zoneand click New Zone…

At the New zone wizardwindow, click next tocontinue

Check the Primary Zonebox and click next

Check the To alldomains controllerin…and click next

Give the network ID andclick next to continue.Ex : 192.168.1

In the next window,check the Allow bothnonsecure andsecure…and click next

The next step is to setthe default gateway,Preferreed DNS serverand Alternative DNSserver address. Ex :Preferred DNS server :192.168.1.2 AlternativeDNS server :210.245.32.130 anddefault gateway :192.168.1.254

Right click the networkicon under the rightcorner and choose repairto reset the networksettings

Open DNS server,expand the ReverseLookup Zone, then rightclick on the zone nameand choose Reload.

After this step, DNSserver will create areverse pointerautomatically

From Run box, typenslookup command tosure that the DNS serveris OK