inferno steam hose
DESCRIPTION
A new generation of steam hose that answers the 8 issues with the current steam hose available.TRANSCRIPT
Klant logoERIKS Hose Technology www.eriks.co.uk
The Goodall BR8 Inferno Steamhose
ERIKS Hose Technology - www.eriks.co.uk
Goodall BR8 Inferno
ERIKS Hose Technology - www.eriks.co.uk
8 Problems - 1 Solution
Common Problems The New Inferno Steam Hose
1. Inner subject to popcorning superior gas-tight and extruded inner
2. Outer layer blowing Outer layer extruded and pin-pricked
3. Metal braid rusting 2 layers of brass laminated steel braid
4. Hose markings unclear Clear spiral marking
5. Premature aging New heat and weather resistant cover
6. Hose kinking Double braid prevents kinking
7. Static charge build up Electrically conductive to allow discharge
8. Fittings leaking DINBO Couplings 100% leak-proof to EN ISO 14423
ERIKS Hose Technology - www.eriks.co.uk
1. Problem: Popcorning
ERIKS Hose Technology - www.eriks.co.uk
Problem: Popcorning
The expansion factor of a water
Droplet into steam.
ERIKS Hose Technology - www.eriks.co.uk
Solution
A mirror smooth, homogeneous, seamless extruded tube made of
a new butyl rubber with a very high gas density
– EPDM 1,0 cc/sec/m2
– Butyl 0,3 cc/sec/m2
ERIKS Hose Technology - www.eriks.co.uk
2. Problem: Outer layer blowing
ERIKS Hose Technology - www.eriks.co.uk
Solution
Pinpricking
Extruded outer
ERIKS Hose Technology - www.eriks.co.uk
3. Problem: Rusting braid
ERIKS Hose Technology - www.eriks.co.uk
Solution
Double braided steel inlays are brass-coated for optimum
corrosion resistance
Stainless Steel inlays also available
ERIKS Hose Technology - www.eriks.co.uk
4. Problem: Hose markings unclear
ERIKS Hose Technology - www.eriks.co.uk
Solution: Clear spiral marking
ERIKS Hose Technology - www.eriks.co.uk
5. Problem: Premature aging, Hardening
ERIKS Hose Technology - www.eriks.co.uk
Solution: extruded EPDM outer
• UV Resistant
• Wear Resistant
ERIKS Hose Technology - www.eriks.co.uk
6. Problem: Kinking of the hose
ERIKS Hose Technology - www.eriks.co.uk
Solution: Two layers of braid
ERIKS Hose Technology - www.eriks.co.uk
7. Problem: Static Generation
Static is created by the collision of the water and the vapour
molecules in the steam. This friction creates a static electricity
charge
ERIKS Hose Technology - www.eriks.co.uk
Solution
The BR8 Inferno steam hose is electrically conductive when
measured between the fittings (< 102 Ω )
The rubber compound has a resistance of less than 106 Ω
ERIKS Hose Technology - www.eriks.co.uk
8. Problem: Fittings leaking
ERIKS Hose Technology - www.eriks.co.uk
Solution: EN14423 Steam clamps
ERIKS Hose Technology - www.eriks.co.uk
The Advantage of DIN clamps
ERIKS Hose Technology - www.eriks.co.uk
Certification