P. van Toi 10-01-2020

ITIS BV Columbusweg 64 NL-4462 HB Goes T +31 113568515 info@itis-nl.com www.itis-nl.com

Test certificate: 201900076-CQ02

ISO 15848-1 QUALIFICATION CERTIFICATE

Industrie Service

This certificate is to certify that the valve below has passed the fugitive emission requirements according to standard: Industrial valves - Measurement, test and qualification procedures for fugitive

emissions - Part 1: Classification system and qualification procedures for type testing of valves (ISO 15848-1:2015).

Test valve details Manufacturer Address Nominal size Pressure rating Type Valve design Drawing number Body material Stem material Gearbox

ERIKS Flow Control Cypresbaan 63, 2908 LT Capell aJd Ijssel, the Netherlands 1-1/2" / DN40 Class 600 Ball valve EN 12516-1 B37624 rev.C date: 20-12-2016 A351 CF8M AISI316 n.a.

pt Stem Seal Material a-ring Viton a-ring Viton

2nd Stem Seal Material R-PTFE R-PTFE

Stem Diameter (ODstem) 20mm 10mm up to 40mm

Stem motion Quarter turn Quarter turn

Body gaskets R-PTFE R-PTFE

Pressure Class Class 600 Class 600 and below

Endurance Class Cal Cal

Temperature Class tRT 5°C to 40°C

Tightness Class AH AH or less severe

Performance class: ISO FE AH - COI - SSA O - tRT - Class 600 - ISO 15848-1

This certificate refers to the above mentioned test valve. This certíñcate does not imply assessment of the production of the valves. This certificate is only valid in conjunction with the full ITIS BV test report number

201900076-R004.

I, Indu,:,ial iesting il. /,.;. =_ o Inspection 5€rV!C!!. ~

P. van Tal

ms BV Columbusweg 64 NL-4462 HB Goes T +31 113568515 info@itis-nl.com www.itis-nl.com

Test certificate: 201900076-CQOl

Industrie Service

ISO 15848-1 QUALIFICATION CERTIFICATE

This certificate is to certify that the valve below has passed the fugitive emission requirements according to standard: Industrial valves - Measurement, test and qualification procedures for fugitive

emissions - Part 1: Classification system and qualification procedures for type testing of valves (ISO 15848-1:2015).

Test valve details Manufacturer Address Nominal size Pressure rating Type Valve design Drawing number Body material Stem material Gearbox

ERIKS Flow Control Cypresbaan 63, 2908 LT Capell aJd Ijssel, the Netherlands 1-1/2" / DN40 Class 600 Ball valve EN 12516-1 B37624 rev.C date: 20-12-2016 A351 CF8M AISI316 n.a.

1 st Stem Seal Material a-ring Viton a-ring Viton

2nd Stem Seal Material R-PTFE R-PTFE

Stem Diameter (ODstem) 20mm 10mm up to 40mm

Stem motion Quarter turn Quarter turn

Body gaskets R-PTFE R-PTFE

Pressure Class Class 600 Class 600 and below

Endurance Class C03 C03 or less severe

Temperature Class tRT 5°C to 40°C

Tightness Class BH BH or less severe

Peñormance class: ISO FE BH - C03 - SSA O - tRT - Class 600 -ISO 15848-1

This certificate refers to the above mentioned test valve. This certificate does not imply assessment of the production of the valves. This certificate is only valid in conjunction with the full ITIS BV test report number

20 1900076-R003.

10-01-2020

Name Authority (TÜV SÜD)

P. van Tal

ITIS BV Columbusweg 64 NL-4462 HB Goes T +31 113568515 info@itis-nl.com www.itis-nl.com

Test certificate: 201900076-C004

Industrie Service

CERTIFICATE OF TESTING This certificate is to certify that the measured leak rates during the endurance test on the test valve below, were within the limits according to the requirements of TA LUFT (Technische Anleitung zur

Luft par. 5.2.6.4) Vom 24. Juli 2002 and VDI 2440 par. 3.3.1.3 November 2000, for 205 cycles at room temperature.

Test valve details Manufacturer Address Nominal size Pressure rating Type Valve design Drawing number Body material Stem material Stem seal material 1st Stem seal material 2nd Gland nut material Gland torque

ERIKS Flow Control Cypresbaan 63, 2908 LT Capell ajd Ijssel, the Netherlands 1-1/2" / DN40 Class 600 Ball valve EN 12516-1 B37624 rev.C date: 20-12-2016 A351 CF8M AISI316 O-ring Viton 70 GLT (brand: Chang Haring Rubber Co., Ltd) R-PTFE, FLON3010 (brand: Hontech) A194 Gr.8 20Nm

Stem motion

Stem (21 / Stem circumference 20mm / 62.8mm

Quarter turn

Valve size 1-1/2" / DN40

Test temperatures

Pressure Class Class 600

205 cycles Operational cycles

No thermal cycles Thermal cycles

16Nm

This certificate refers to the above mentioned test valve. This certî1iicate does not imply assessment of the production of the valves. This certificate may not be reproduced in whole or in part, without written approval of ITIS B.V. This certificate is only valid in conjunction with the full ITIS BV test report number 201900076-R006.

Maximum operation torque

Indust"j;:1 ic:sting & Inspection Services

10-01-2020

pproved signatory

ECON Premium FE-Test Certificate ISO 15848-1 CO3.pdfECON Premium FE-Test Certificate TA-Luft_RT.pdf