0903

-068

With the scientific collaboration of the European Commission DG JRC

Institute for the Energy Renewable Energies Unit

End-use Energy Efficiency Activity

Organised by :In partnership with :

MenP-EEMODS09.indd 1 27/04/09 11:25:32

Monday 14 September18:00 20:00 Opening Plenary Session

• Jacques Auxiette - President of Pays de la Loire Region • Representative of European Commission DG TREN• Representative of US DoE

• Michel Laroche - President of Cetim• Jean-Maurice Beurrier - Director of Cetim Nantes• Representative of ADEME

20:30 22:00 Welcome Party

Tuesday 15 September09:00 10:15 Plenary Session

1. « Understanding Companies' Investment Decisions for Energy Efficiency » - Paolo Bertoldi, European Commission DG JRC 2. « Standard range of permanent magnet synchronous motor » - Eric Moreau, LEROY SOMER, France 3. « Energy management and pump CEN/ISO standardisation » - Robert Pozzoli, CEN TC197 chairman

10:15 10:45 Coffee Break

10:45 12:50 Policies and programmes 1

1. « Global Motor Systems Network: the IEA 4E EMSA project » Conrad U. Brunner, A+B International, Switzerland 2. « Update on the Asia Pacific Partnership ‘Harmonization of Test Procedures » - Sarah Hatch, Department of the Environment, Water, Heritage and the Arts, Australia 3. « Three phases of motor efficiency in North America: 1] Epact 2] NEMA Premium and 3] System Efficiency » - Robert Boteler, Emerson motors, USA 4. « Beyond NEMA Premium: An Overview of Efforts to Boost & Promote Motor Efficiency in the US » - Richard E. deFay, Copper Development Association, USA 5. « Energy Saving Program and Standards for 3-Phase Induction Motor in Korea » - P-W. Han, Korea Electrotechnology Research Institute, KERI, Korea

Motors 1 1. « Voltage Unbalance Impact on the Performance of Line-Start Permanent-Magnet Synchronous Motors » - Fernando J. T. E. Ferreira, University of Coimbra, Portugal 2. « In - Situ Induction motor Efficiency Determination: an alternative for the implementation of maintenance focused on efficiency » Rosaura Castrillón,

Universidad Autónoma de Occidente, Colombia 3. « Devices Multi-Sensors (D.M.S.) for electric motors » Thierry Jacq, Electricité De France, France 4. « The Keppe Motor – 80% Reduction In Power Consumption » - Pérsio Burkinski, Brazil 5. « A numerical design platform for induction motor efficiency enhancement under cost and performance optimization constraints » - Alfredo Contin,, University

of Trieste, ItalyEnergy Management 1

1. « EMS as a policy instrument for energy efficiency in Ireland, Sweden and Denmark » Erik Gudbjerg, Lokalenergi, Denmark 2. « Overview of industrial energy management and its place in promoting industrial energy efficiency » - Aimee McKane, LBNL, USA 3. « Examples of the implementation of national energy management policies (Japan, Korea, Thailand, China, US) » - NN 4. « International- UNIDO Market transformation programmes in SE Asia, Russia, S. Africa, Turkey, Egypt » NN, Unido

12:50 14:10 Lunch

14:10 15:50 Policies & Programmes 2

1. « Status and Outlook for Motor System Energy Conservation in China » - Xin Sheng, China Energy Conservation Association (CECA), China 2. « Brazilian Experiences in Industrial Induction Motor’s MEPS Implementation » George Alves Soares, ELETROBRÀS SA, Brazil 3. « Energy savings in French industry: an overview of the potential on electric motors » Maxime Dupont, Electricité De France, France 4. « French Industry Potential of Energy Saving in Electrical Motors » Bruno Millet, Ceren, France

Motors 2 1. « Guide for the selection and application of energy-efficient motors » Martin Doppelbauer, SEW Eurodrive GmbH, Germany 2. « Switched Reluctance Motors for Compressors » Robert Boteler, Emerson motors, USA 3. « Optimisation of a range permanent magnet synchronous machines for a wide range of industrial applications » - Alban Marino, LEROY SOMER, France 4. « Large-Scale Downsizing of Induction Motors Requiring Stator Rewinding as a Low-Cost Strategy to Save Energy and Extend Motors Lifetime » Fernando J. T. E.

Ferreira, University of Coimbra, PortugalPump and Pump Systems 1

1. « Improving Efficiency and Quality of a Steel Production by using Centrifugal Pumps with Retrofitted Integrated Speed Control » - Gerhard Berge, KSB AG, Germany 2. « Energy-efficiency in Variable Speed Drive (VSD) controlled parallel pumping » Juha Viholainen, Lappeenranta University of Technology, Finland 3. « Optimizing life cycle costs (LCC) in water segment pumps » Giorgio Brianza, ABB S.p.A., Italy 4. « Hydraulic efficiency on Pumps: essential criteria to enhance global efficiency » Corinne Arpin, Salmson, France

15:50 16:20 Coffee break

16:20 18:25 Policies & Programmes 3

1. « The Australian Compliance and Testing Program – energy efficiency » - Sarah Hatch, Department of the Environment, Water, Heritage and the Arts, Australia 2. « Energy Conservation Standards and Energy Labelling for Electric Motors in China » - Zhao Yuejin, China National Institute of Standardization, China 3. « Strategy and Promotion for High Efficiency Motor System in Taiwan » Gwo-Jou Huang, Industrial Technology Research Institute (ITRI), Taiwan 4. « Technical and Economical Analysis of Elevators and Escalators Technologies » Aníbal de Almeida, University of Coimbra, Portugal 5. « The Energy Efficient Company Programme in Austria » Konstantin Kulterer, Austrian Energy Agency, Austria

Test Methods 1. « Comparison of Existing Standard Methods of Determining Energy Efficiency for Three-Phase Cage Induction Motors » - Pierre Angers, Hydro-Québec, Canada 2. « Comparison of Four Efficiency Estimation Methods » Enrique Quispe, Universidad Autónoma de Occidente, Colombia 3. « The effect of stray losses on direct and indirect methods of induction motor efficiency measurement » - Emanuel B. Agamloh, Advanced Energy Corp., USA 4. « Comparisons of Efficiency Testing Standards of Three-Phase Induction Machines » M-J. Kim, Korea Electrotechnology Research Institute, Korea 5. « Motors with Adjustable Speed Drives: Testing Protocol and Efficiency Standard » Anibal de Almeida, University of Coimbra Portugal

Pump and Pump Systems 2 1. « Auditing pumping systems to unveil hidden energy saving potential » J. Nagesh Kumar, National Productivity Council, India 2. « Results of EuP Lot 11: Pumps and Circulators » Hugh Falkner, Atkins PLC, UK 3. « ASME EA-2-2008 Energy Assessment for Pumping Systems », Gunnar Hovstadius, Gunnar Hovstadius Consulting LLC, USA 4. « Intelligent System for fluidic monitoring in order to improve life cycle cost and system safety » - Samuel Plumejault, CETIM, France 5. « Innovative containment shell » Nicolas Weibel, Greene, Tweed & Co. Switzerland

19:00 22:00 Dinner: Les Machines de l’Ile Museum

Wednesday 16 September09:00 10:40 Gestion de Energy Management 2

1. « Energy management for Austria » Konstantin Kulterer, Austrian Energy Agency, Austria 2. « MGIE, The Colombian Energy Management Model: Development, Methodology, Strategies for the Promotion and Implementation » Enrique Quispe,

Universidad Autónoma de Occidente, Colombia 3. « Regarding energy management of motor systems. Anecdotal evidence and practise from Long Term Agreement » - Frank Hartkamp, SenterNovem, Netherlands 4. « ECO Responsible Maintenance » - Frederic Nectoux, LEROY SOMER, France

Other Motor Applications 1. « High Efficiency PM Synchronous Motor for Electrical City Scooter » Francesco Parasiliti, University of L’Aquila, Italy 2. « Constructing High Efficiency Motors with Cost-Effective Materials » John Petro, NovaTorque, Inc., USA 3. « Autonomous reluctance generator for simultaneous ac and dc loads » Emeka S. Obe, Technische Universität Darmstadt, Germany 4. « Task G – New Motor Technologies for the IEA 4E EMSA project » Charles Gaisford, WSP Energy, UK

Compressors 1. « Categorising the Efficiency of Industrial Air Compressors » Hugh Falkner, Atkins PLC, UK 2. « Benchmarks for efficient compressed air systems » Horst Singer, BEKO Technologies GmbH, Germany 3. « A Bottom-up Monitoring and Validation Procedure to Assess Energy Savings with Variable Speed Drive rotating air compressors » - Norma Anglani, University

of Pavia, Italy 4. NN, Atlascopco

10:40 11:10 Coffee Break

11:10 12:50 Audits 1

1. « Internet-Based Tools for Developing & Implementing Energy Saving Projects (ECP) in Motor-Driven Systems »Sridharan Raghavachari, Online Energy Manager, USA 2. « State of the art in energy consumption monitoring » Thierry Dupont, AERGY sarl, France 3. « Beyond MEPS: Getting Premium Efficiency Motors Installed in Your Plant » Gilbert A. McCoy, Washington State University, USA 4. « Small Changes - Big Savings! » Claus M Hvenegaard, Danish Technological Institute, Denmark

Drives 1. « Saving energy while promoting power quality » Guoxing Wang, Shanghai Energy Conservation Service Center, China 2. « Return on natural capital analyses with ABB drives » Timo Miettinen, ABB, Finland 3. « Using Sinusoidal Waveform Technology to Improve Overall Motor Efficiency A Technological Breakthrough for Motor Controllers » Amir Broshi, Power Electronics, Israel 4. « Ultracapacitors for Energy Storage in Industrial Grid-connected Systems » A. Di Napoli, University Roma Tre, Italy

Fans 1 1. « Overall efficiency and Carbon emissions »,Geoff Lockwood, Ebm-papst UK ltd, United Kingdom 2. « Fan efficiency, what does it mean? » Tony Breen, Nuaire ltd, United Kingdom 3. « The EuP Directive and the possible Implementation Measures for Fans », Peter Radgen, E.ON Energie AG, Germany 4. « Comparison of energy efficiency of refrigeration systems » Michele Merchat, Climespace, France

12:50 14:10 Lunch

14:10 15:50 Audits 2

1. « Replacement of electric motors in Chilean copper mining: A case study », Ingeborg Mahla, University of Santiago, Chile 2. « Condition Monitoring of Induction motors using Vibration and Electrical signature analysis » - Frédéric Champavier, Metravib (AREVA group), France 3. « Life cycle costing of valves systems » - Jean-Yves Benaiteau, Cetim, France 4. « Energy Audits: University Approach With ABB 3 ».Niina Aranto, Lappeenranta University of Technology, Finland

Motors 3 1. « Recent development of Copper Rotor Motor in China » Daniel Liang, International Copper Association, China 2. « Comparison of numerical and analytical simulation of saturated zig-zag flux in induction machines » - R. Hagen, Darmstadt University of Technology, Germany 3. « Energy Savings in the Minerals Industry with Copper-Rotor “Super-Premium” Electric Motors » - R. Olcott, NYCO Minerals, Inc., USA 4. « Overview and Novel Proposals on In-Field Load Estimation Methods for Three-Phase Squirrel-Cage Induction Motors » Fernando J. T. E. Ferreira, University of Coimbra, Portugal

Fans 2 1. « Implementation of the European EuP Directive for fans » Alain Guedel, Cetiat, France 2. « Fan Efficiency: Is a single minimum energy efficiency level for fans a practical objective? » Geoff Lockwood, ebm-papst UK ltd, United Kingdom 3. « A standard for the Energy classification for Fans » Tony Breen, Nuaire ltd, United Kingdom

15:50 16:20 Coffee break

16:20 17:15 Closing Plenary

Thurday 17 September

09:00 12:30 Company Visit : Cetim Nantes

Interventions of EEMODS’09 will be presented exclusively in English. In addition, the organizers reserve the right to change this program if necessary.

EEMODS ’09 will provide a forum to discuss and debate the latest developments in the impacts of elec-trical motor systems on energy and the environment, the policies and programmes adopted and planned, and the technical and commercial advances made in the dissemination and penetration of energy-efficient motor systems. Particular attention will be dedicated to energy management, international harmonisations and standards, policies, and innovative financial schemes for motor systems.

Registration fees* : Are included: access to the conference, attendee's file, coffee breaks, lunch, welcome dinner, gala dinner, shuttle service, site tour.

HT TTC

Participant 680 euros 813,28 euros

Speaker 490 euros 586,04 euros

Registration on www.eemods09.frFind on this site all the practical information about the event

Contact : Rodolphe Beaugrand registration@eemods09.fr Tél. : +33(0)3 44 67 36 82 Fax : +33(0)3 44 67 36 94

Gala diner – Machine de l’Ile Museum the 15th september Extraordinary machines, installed in the "Big Naves” of former shipyards.Visit the gallery of the Machines

Company visit CETIM Nantes the 17th september

Conference and Accomodation : *** WESTOTEL Nantes-Atlantique, located on the outskirts of Nantes, has modern facilities that meet the comfort requirements of business and individual, for a stay combining work and rest.

Rates

91,71 euros TTC per night for a single room

117,27 euros TTC per night for a double room

Situation: A free shuttle service will be organized for transfers between airport / train station and Westotel.

D 723PORNICNoirmoutier

D 249CHOLETPoitiers

A 83NIORTBordeaux

A 11PARISAngersLe MansTours

NANTES

Airport Nantes-Atlantique

La Chapelle-sur-Erdre

NANTES ATLANPOLE

Universities

N 137RENNESCaenSt-MaloSt-Brieuc

& stade de la BeaujoireParc des Expositions

D’ACCESPLAN

Train station

N 165LA BAULESt-NazaireVannesLorientBrest

La Loire

Créd

its p

hoto

s : ©

SAS

Wes

t-Ev

ents

- ©

Nau

tilus

Nan

tes

- © C

. Bar

ret C

etim

Réf.

0904

-069