€¦ · in every refinery, oil & gas plant… ocs is there! page : 6 trust in our long...
TRANSCRIPT
OIL
GAS
POWER
50 YEARS OF EXPERIENCE
Engineering & Manufacturing
P R E S S U R E E Q U I P M E N TF O R P O W E R ,O I L & G A S
www.ocs. it
Page : 2
INTRODUCINGO U R C O N C E P T O F B U S I N E S S
OCS pays close attention to the quality of its products with the
guarantee of made in Italy manufacturing and using Italian and
European row materials. Thanks to the rational and efficient use
of the company resources, OCS is a very flexible and dynamic
company.
CONTENTS
04MISSION
10EQUIPMENT
14OCS ENGINEERING
05VISION
08WORKSHOPS
06LONG EXPERIENCE
12OUR PRODUCTS
17INSPECTIONS AND TESTS
18QUALITY SYSTEM
19HEALTH, SAFETY & ENVIRONMENT
16STRONG POINTS
Page N : Page : 3
OCS manufactures
the highest quality of
Pressure Equipment,
required by the global
market.
Page : 4
MISSION
Delivering quality,
custom made products,
manufactured within
project schedule
commitments, in safety
conditions.
T H E P R O J E C T
Ou
r skills
at y
ou
r se
rvic
e!
Page N : Page : 5
VISIONO U R C U L T U R E
THE SOLUTION
from the project to the manufacturing
in every Refinery, Oil & Gas plant…
OCS is there!
Page : 6
TRUST IN OUR LONGEXPERIENCE
O.C.S. OFFICINE COSTRUZIONI SPECIALI was founded in
1970 by the engineer Giancarlo Ravagnan, with activities
focused on design, engineering and fabrication of special
machines required by clients, offering personalized solutions
and taking into account the special situations and workplaces
where the machines had to work.
Resulting from the technical competence developed
during these years, OCS is nowadays competitive
and known all over the world!
Page N : Page : 7
Since XXI century OCS has increased
its competitiveness in the design and
fabrication of Pressure Equipment
for the Oil & Gas / Petrochemical
sector, expecially in heavier and
higher thickness vessels fabrication.
550TONS
Page : 8
WORKSHOPSD E V E L O P M E N T S I T E
OCS workshops are located in the North of Italy, with an easy
access to the major Adriatic sea ports.
Albignasego Plant: 33,000 sq. m.
Marghera Plant: 24,000 sq. m.
Transport restriction to the nearest harbor (Venice): 50x8.5x8.5 m
Our plants are fully equipped with the most updated
machineries, enabling us to manufacture Pressure Equipment
up to 550 tons.
Sandblasting & Painting shops with PWHT Furnaces are
available in both plants.
HIGHPERFORMANCE
Page N : Page : 9
Experience and Technology in Manufacturing Pressure Equipment
ALBIGNASEGO PLANT MARGHERA PLANT
Strategic Locations
BESTEQUIPMENT FOR BESTRESULTS!
Page : 10
OCS facilities include in-house rolling machines, plasma cutting
machines vertical / horizontal lathes, milling machines and
hydraulic presses, with a computer numeric control system.
OCS is also equipped with different types of cutting, sawing,
bevelling, drilling, bending, baring, shearing, grinding, milling,
tube expanding and cleaning machines.
Different types of welding machines are available to meet
every customer’s needs, such as:
SAW, SMAW, ESW, TIG, MIG, MAG.
EF
FIC
IEN
CY
Page N : Page : 11
Page : 12
50 YEARS EQUIPPING YOU
WITH PRESSURE ITEMS
In-house fabrication
and assembly
OCS offers
its customers
a complete service
of Pressure
Equipment for
Power, Oil & Gas
Industry.
FL
EX
IBIL
ITY
Page N : Page : 13
OCS product range encompasses engineering and
fabrication of Pressure Vessels, Shell & Tube Heat
Exchangers, Decomposers, Columns, Reactors and
Boilers – Waste Heat Recovery Units (including thermal
design), Desalters and PSA (Pressure Swing Adsorption
Process).
OUR PRODUCTS
Key-forces:
experience, reliability,
on time deliveries,
according to customers
specifications.
THREE SPECILITIES ONE WORD: OCS ENGINEERING
Page : 14
OCS can provide engineering, technologies
and management for the Oil & Gas Industry.
OCS staff is able to manage mechanical calculations of Pressure
Equipment:
➢POWER (PGB and WHB) – Process & Thermal Design
➢OIL(Desalter)–ProcessEngineering
➢GAS(PressureSwingAdsorptionProcess)
Process Technology with personalized solutions built
accordingtotheclient’sspecifications
Page N : Page : 15
Internal
professional
engineers carry
out mechanical
calculations
in accordance
with the latest and
major
international
codes and
software
INTERNATIONAL CODES
ASME, EN-13445, VSR/VSG, AD2000, MERKBLATTER, PD-5500, CODAP, STOOMWEZEN, IBR, TEMA, EAC, API
SOFTWARE
Thermal/Process Design: PROPRIETORY Mechanical Design: COMPRESS CODEWARE Preparation of Drawings: AUTOCAD Finite Elements Analysis: CREO
BIG DIMENSIONSHIGH THICKNESS
STRONG POINTS
Page : 16
PRESSURE EQUIPMENTS
PRESSURE VESSELS • Drums & Columns • Reactors • Vessels • Steam Drums • Dampeners • Separators
HEAT EXCHANGERS • Shell & Tube Heat Exchangers • TLE (Transfer Line Exchangers) • Decomposers
OCS ENGINEERING & TECHNOLOGY
BOILERS – with Thermal Design • Fire Tube Boilers (PGB - Process Gas Boiler and WHB – Waste Heat Boiler) • Water Tube Boilers
CONSTRUCTION MATERIALS
We are more competitive on high thickness and big dimensions and we are able to fabricate vessels in:
• Carbon steel • Low alloy steel • Nickel alloys • Stainless steel • Cladded steel • Aluminum
APPLICATION FIELDS
We fabricate Pressure equipments for the Oil & Gas sector:
• Onshore Oil & Gas • Offshore Oil & Gas • Refineries • Petrochemical Plants • Chemical Plants • Power Generation Plants • Hydrogen, Ammonia and Methanol Plants
OCS Capabilities:
Maximum thickness: --> 250mm
Maximum diameter: --> ø 8500 mm
Maximum shipping weight: --> 550 tons
INSPECTIONS AND TESTS
Page N : Page : 17
Tests are performed by OCS personnel with national
and international qualifications.
Standard in-house NDT – Non destructive tests:
radiographic, magnetic particle examination, ultrasonic,
dye penetrant examination, visual and physical, hydraulic
and helium tests.
Upon request, other tests can be performed in accordance
with International standards.
Destructive Tests DT (such as tensile and bending, impact
tests)arecarriedoutbyexternalqualifiedlaboratories.
IT IS HEREBY CERTIFIED THAT THE QUALITY MANAGEMENT SYSTEM OF
EA:18EA:17
8030/02/S
O.C.S. OFFICINE COSTRUZIONI SPECIALI SPA
STRADA BATTAGLIA, 167 35020 ALBIGNASEGO (PD) ITALIA
STRADA BATTAGLIA, 167 35020 ALBIGNASEGO (PD) ITALIA
DESIGN AND PRODUCTION OF PRESSURE VESSELS FOR CHEMICAL AND PETROCHEMICAL PLANTS, FORENERGY PRODUCTION AND GAS TREATMENT AND OF EQUIPMENT AND SYSTEMS TO RECOVER FLOATING
HYDROCARBONS (DISCOIL® OIL SKIMMER).
PROGETTAZIONE E PRODUZIONE DI CALDARERIA PER IMPIANTI CHIMICI E PETROLCHIMICI, PER PRODUZIONEENERGIA, PER TRATTAMENTO GAS E DI APPARECCHIATURE E SISTEMI PER IL RECUPERO DI IDROCARBURI
GALLEGGIANTI (DISCOIL®).
24.12.2002
07.01.2015
Per informazioni sulla validitàdel certificato, visitare il sito
www.rina.org
For information concerningvalidity of the certificate, you
can visit the sitewww.rina.org
CISQ è la Federazione Italiana diOrganismi di Certificazione dei
sistemi di gestione aziendale
CISQ is the ItalianFederation of managementsystem Certification Bodies
CERTIFICATE No.
CERTIFICATO N.
SI CERTIFICA CHE IL SISTEMA DI GESTIONE PER LA QUALITÀ DI
PER I SEGUENTI CAMPI DI ATTIVITÀ / FOR THE FOLLOWING FIELD(S) OF ACTIVITIES
NELLE SEGUENTI UNITÀ OPERATIVE / IN THE FOLLOWING OPERATIONAL UNITS
L'uso e la validità del presente certificato sono soggetti al rispetto del documento RINA: Regolamento per la Certificazione di Sistemi di Gestione per la Qualità
La validità del presente certificato è subordinata a sorveglianza periodica annuale / semestrale ed al riesame completo del sistema di gestione con periodicità triennale
The validity of this certificate is dependent on an annual / six monthly audit and on a complete review, every three years, of the management system
Prima emissioneFirst Issue
Emissione correnteCurrent Issue
RINA Services S.p.A.
È CONFORME ALLA NORMA / IS IN COMPLIANCE WITH THE STANDARD
Riferirsi al Manuale della Qualitàper i dettagli delle esclusioni ai
requisiti della norma
Data scadenzaExpiry Date 22.12.2017
SGQ N° 002 A SSI N° 001 GSGA N° 002 D DAP N° 001 HPRD N° 002 B PRS N° 066 CSCR N° 003 F LAB N° 0832
Ing. Michele Francioni
(Chief Executive Officer)
Reference is to be made to theQuality Manual for details
regarding the exemptions from therequirements of the standard
ISO 9001:2008
Membro degli Accordi di MutuoRiconoscimento EA, IAF e ILAC
Signatory of EA, IAF and ILAC MutualRecognition Agreements
The use and validity of this certificate are subject to compliance with the RINA document : Rules for the certification of Quality Management Systems
Via Corsica 12 - 16128 Genova Italy
RE
LIA
BIL
ITY
Page : 18
QUALITY SYSTEM
OCS Quality System is certified by ISO9001
The Quality Program is continuously
implemented throughout all the
fabrication processes, in accordance
with our customers’ needs.
QUALITY MANUAL
In-house Quality Staff
ensures that our Products
are in line with the major
Standard Regulations in the
Oil & Gas sector as well as
with the Certifications to
export everywhere!
Page N : Page : 19
HEALTH, SAFETY & ENVIRONMENT
OCS is firmly committed to provide its personnel, and whoever involved
in its business, with a safe and heathly workplace.
Protecting the environment is another key issue for us.
In compliance with
Legislation and
Regulations, OCS has
adopted an HSE Policy
and system.
OIL GASPOWER
Albignasego PlantHeadquarter & First Manufacturing plant
S.S.16 - Strada Battaglia 167
35020 Albignasego
(PD) – Italy
Ph. +39 0498671511
Fax. +39 0498671512
E-mail: [email protected]
Marghera PlantSecond Manufacturing plant
Via delle Querce 45
30175 Marghera
(VE) – Italy
www.ocs. it