Gas Engine Controls Division Tel: (417) 720 –47951934 S. Stewart Ave. www.gasenginecontrols.com

Springfield, MO 65804 www.kraftpower.com

Features

IGNITIONA3 Conversion Kit

Timing conversion Kit by GILL

Sample Base Drawing

Economical and Time-saving conversion

Allows for Ignition upgrade on engines withoutan existing cam timing disc

Eliminate Costly Magneto Overhauls and increaseengine performance and efficiency

Coil

Ignition Module

Massachusetts ■ New Jersey ■ New York ■ Ohio ■ Michigan ■ Georgia ■ North Carolina ■ Missouri ■ Texas

NOTE: A 2 Pin inductive pickup cable isrequired and available at Kraft Power

Altronic® is a registered Trademark of Altronic LLC

Part No. See Below

4, 6 and various 8 cylinders models havea 1 inch diameter primary connector.

Part No. 1609-PK –070

Various 8 cylinder and 12 cylinder modelshave a 1 ¼ inch diameter primary connector.

Part No. 1609-PK-071

The A conversion kit allows for easy conversion of the Altronic® III magnetos to a simplified and accurate timing device

for Gill ignition systems. This eliminates the labor-intensive expense to install a cam disc onto the engine. The kits are

available in two versions – depending on the size of the existing primary connector on the Altronic® III. This time-

saving and economical kit will reduce the costs of the complete retrofit, and allow the engine to now operate at maxi-

mum performance and efficiency with all the advantages of inductive ignition technology.