igcse notes numbered
TRANSCRIPT
-
8/13/2019 iGCSE Notes Numbered
1/245
-
8/13/2019 iGCSE Notes Numbered
2/245
-
8/13/2019 iGCSE Notes Numbered
3/245
Contents
Topic Page NumberTopic 1 General Physics 2 Past Paper Questions 26
Topic 2 Thermal Physics 70 Past Paper Questions 83Topic 3 Waves 108 Past Paper Questions 120
Topic 4 Electricity & Magnetism 146 Past Paper Questions 173Topic 5 Atomic Physics 214
Past Paper Questions 221
Appendix
Syllabus 234
1
-
8/13/2019 iGCSE Notes Numbered
4/245
Topic 1:General Physics
Length
Length is a distance measurement and its SI unit isthe metre !!".
Length is usually measured with a rule, a tape or atrundle wheel.
Small lengths are measured with a micrometer or
callipers where a greater precision is available.
In certain circumstances, averag!lengths can befound be measuring a number of distances togetherthen dividing by the number of objects eg a ream ofpaper.
Time
Time is usually measured with a stopclock. Humantiming is not precise because of reaction times.
The SI unit for time is seconds !s".
For repeated events, an averag!time can be foundby measuring a number of repeats then dividing bythe number of cycles eg. a pendulum.
1
2
3
2
-
8/13/2019 iGCSE Notes Numbered
5/245
Speed
Speed tells us how fast something is moving.
It is measured in m/s.
Average speed is calculated using:
Average Speed (m s) =Distance moved (m)
time taken (s)
Examples A sprinter runs 100!in 10s. Calculate his average speed.
A bird flies 60!in 5s. Calculate its average speed.
Pupils measured their times taken to travel di#erentdistances doing various exercises. Their results are recordedin the table. Complete the table.
Exercise Distance !!" Time !s" Speed !m/s"
Running 70 12
Walking 10 35
Hopping 50 110
Acceleration Acceleration tells us how quickly something is changing
its speed.
It is measured in m/s2.
Acceleration is calculated using:
Average Acceleration (m s2) =
Change in speed ( m s )
time taken (s)
Example:
A motorbike goes from 10m/sto 35m/sin 8s. Calculatehis acceleration
4
5
6
3
-
8/13/2019 iGCSE Notes Numbered
6/245
Distance/time graphs
A Distance/time graph is a way of representingmotion.
time
distance
stationaryConstant speed !fast"
Constant speed !slow"
Acceleration
Calculations with distance/time graphs
Speed is given by the gradient of the distance/timegraph.
Distance/time graph questions
Describe the motion of the following bodies:
t
d!a"
t
d
!b"
t
d
!c"
7
8
9
4
-
8/13/2019 iGCSE Notes Numbered
7/245
Distance/Time Graphquestions
Calculate the speeds of the car and the bikebelow:
CarBike
0
125
250
375
500
0 5 10 15 20 25
Distance(m)
Time (s)
Speed/time graphs
A Speed/time graph is an alternative wayof representing motion.
time
speed
Constant speed
Rapid acceleration
Gradual acceleration
Non$UniformAcceleration
Stationary
Calculations with speed/timegraphs
Acceleration is given by the gradient of the speed/time graph.
Distance is given by the Area under the speed/timegraph.
10
11
12
5
-
8/13/2019 iGCSE Notes Numbered
8/245
Speed/time graph questions
Describe the motion of the followingbodies:
t
v!a"
t
v
!b"
t
v
!c"
Speed/time calculation.
!a"Find the acceleration of the bike in the first 10s.
!b"Find the distance moved by the bike in the first 20s.
0
3.75
7.50
11.25
15.00
0 5 10 15 20
Motion of a bike
Speed(m
/s)
time (s)
The Ticker$Timer
The ticker$timer runs at 50Hz. It puts 50 dots onthe tape every second.
If the tape moves quickly, the dots are widelyspaced.
If the tape moves slowly, the dots are close
Ticker Timer
Ticker Tape
13
14
15
6
-
8/13/2019 iGCSE Notes Numbered
9/245
Ticker TapeSlow moving ticker-tape
Fast moving ticker-tape
Charts
By cutting the tape into 5 space strips and arranging themside$by$side we can get a chart representing the motion.
Each strip will represent 0.1sof motion.
Typical Shapes of Charts
16
17
18
7
-
8/13/2019 iGCSE Notes Numbered
10/245
Calculations
Since each strip represents 0.1s of motion, and wecan measure the length of the strips in cm, we canuse speed=distance/time to calculate the speeds.
Scalars and Vectors
A SCALAR quantity has a size !Magnitude", but no direction.
Examples of scalar Quantities are temperature, time, energy and power.
A VECTOR quantity has both a magnitude and a direction. Vectorsare often represented with an arrowed line. The direction of the arrowis the direction of the vector and the length of the line represents thesize of the vector.
Examples of vectors are force, momentum and velocity.
F
BigStone
SandBucket
SmallStone
1
SmallStone
PaperTray
SandBucket
2
Vacuum
Paper Coin
3
19
20
21
8
-
8/13/2019 iGCSE Notes Numbered
11/245
Gravity
Experiment 1
Both Stones Land at the same time.
Gravity makes them fall at the same rate. Experiment 2
Stone landed first.
Air Resistance slowed down the paper tray.
Experiment 3
Both coin & paper land at the same time.
Weight and Mass
Weight is a force. It tells us how heavy somethingis. It is measured in newtons !N". It changesdepending upon the size of gravity. !Trip to themoon"
Mass tells us how much substance there is in anobject. It is measured in kilograms !kg". It never
changes.
On Earth we multiply mass by 10 to get weight.
Density
Density tells us how compact the mass is in a material.
It is given by:
or
Stick to one set of units.
Water has a density of 1000kg/!3or 1g/c!3.
Materials with a smaller density than water will float,materials with a higher density than water will sink.
Density ( kg m3) =
mass(kg)
volume(m3)
Density ( g cm3) =
mass(g)
volume(cm3)
22
23
24
9
-
8/13/2019 iGCSE Notes Numbered
12/245
Density CalculationComplete the following table:
ObjectDensity !kg/
m3"Mass !kg" Volume !m3"
A 4000 2
B 8000 4
C 2000 1000
D 2000 4
a"Which object has the greatest mass?
b"Which has the smallest volume?
c"Which objects could be made of the same substance?
d"Which object would float on water?
Irregular objects The volume of a liquid can be determined using a
measuring cylinder.
The volume of irregular objects has to be found bydisplacement.
Hookes Law
Hookes Law states that the extension in a spring isproportional to the load applied.
The constant of proportionality is called the SpringConstant.
load !extension
or
F = kx
25
26
27
10
-
8/13/2019 iGCSE Notes Numbered
13/245
Extension/Force Graphs
A graph can be plotted to show how Force varieswith extension for a spring.
The graph shows proportionality up to a pointcalled the proportionality limit.
With increased extension, the spring will reach apoint at which it will not return to its original shape.This is called the elastic limit. The spring showsplastic behaviour beyond here.
Load/Extension Graphs
A graph can be plotted to show how extension varieswith load for a spring.
The graph shows proportionality up to a pointcalled the proportionality limit.
With increased load, the spring will reach a point atwhich it will not return to its original shape. This iscalled the elastic limit. The spring shows plasticbehaviour beyond here.
Extension/Force Graphs
extension
Load0
ProportionalityLimit
Linear Region
28
29
30
11
-
8/13/2019 iGCSE Notes Numbered
14/245
Newtons 1stLaw
If the forces around an object balance !resultant0N", then it will either:
Remain at rest
or
Move at a constant speed in a straight line.
!This is the same as saying constant velocity".
Exam les of 1stLaw
Remains at rest Moves at aconstant speed
in a straightline
Normal
Air Air
Gravity
Normal
Gravity
Oil Tube Experiment
Gravity
FluidResistance
Falls at aconstant
speed in astraight line.
31
32
33
12
-
8/13/2019 iGCSE Notes Numbered
15/245
Unbalanced Forces
If the forces around an object do not balance, thenthey will cause the object to accelerate !ordecelerate".
The rate of the acceleration depends upon themass of the object.
The quantities are linked by the followingequation:
F(N) =m(kg)!a(m s2)
Questions
1. What will be the Force needed to produce anacceleration of 2m/s2on a mass of 4kg?
2. What will be the Force needed to produce anacceleration of 5m/s2on a mass of 42kg?
3. What will be the acceleration produced when aForce of 50N acts upon a mass of 10kg?
Newtons Laws Calculation
A front wheel drive car is travelling at constant velocity. Q is the force of the air on the moving car.P is the total upward force on both front wheels.
!a"Explain why P= 4 000N, Q= 400N
!b"Calculate the mass of the car.
!c"The 400 N driving force to the left is suddenly doubled.
!i"Calculate the resultant forward driving force.
!ii"Calculate the acceleration of the car.
!iii"Sketch a graph showing how the velocity of the car changes with time !start the graph justbefore the driving force is doubled."
400 N
P 6000 N
Q
10 000 N
34
35
36
13
-
8/13/2019 iGCSE Notes Numbered
16/245
Circular Motion When an object is moving in a circle, it must be experiencing a
force TOWARDS THE CENTRE of the circle.
We call this the CENTRIPETAL Force.
This should not be confused with CENTRIFUGAL Force.
The centripetal force is directed at right angles to the objectsvelocity.
objects path
direction of force
Questions
For each of the following examples, draw a sketch toshow the situation, name the force providing thecircular motion, and indicate its direction:
A" The Earth orbiting the Sun.
B" A car rounding a bend.
C"A hammer$thrower winding into his throw.
Moments
A moment is a turning force.
It is given by:
Moment(Nm) =Force(N)!distance(m)
37
38
39
14
-
8/13/2019 iGCSE Notes Numbered
17/245
Example
Calculate the moment produced:
0.1m
100N
The Principle of Moments If a lever is balanced !in equilibrium"then the total
clockwise moments equal the total anti$clockwisemoments. It will not move.
Because of Newtons 1st Law, the forces must alsobalance.
Anti$clockwisemoments
Clockwisemoments
Results
Left-Hand Side Right-Hand Side
Weight Distance W x d Weight Distance W x d
2 8 4 ?
3 4 ? 6
5 2 2 ?
6 3 ? 2
40
41
42
15
-
8/13/2019 iGCSE Notes Numbered
18/245
Moments Questions
1. Explain why a mechanic would choose a long$armspanner to undo a tight nut.
2. In the following diagram, what is the weight of X ?
X 4N
20 cm 25 cm
Uses of Levers
Spanner
Nutcracker
Scissors
Centre of Mass
Centre of mass is the point on an object that is theaverage position of the mass of the object.
The centre of gravity is a point on all objects throughwhich forces appear to act.
The two points are the same.
The centres of mass of regular objects are obvious. Theyalways lie on a line of symmetry.
They are the point under which we place a pivot to balancethe object.
43
44
45
16
-
8/13/2019 iGCSE Notes Numbered
19/245
Regular Objects
Stability
Stability tells us how secure something is on the ground.
If something is stable, then it will not topple easily.
There are two factors to consider when changing thestability of an object:
The area of the objects base. The position of the centre of mass of the object.
A stable object will have a BIG base, and a LOW centre ofgravity.
Simple Addition
If two vectors are parallel, then they can be simplyadded or subtracted to give a resultant.
3N 5N
2N
RESULTANT
46
47
48
17
-
8/13/2019 iGCSE Notes Numbered
20/245
2D$Addition
If the vectors are not parallel we have to draw a scalediagram and add the vectors to give a resultant.
3m/s 2m/s
RESULTANT
3m/s
2m/s
Examples
1. A plane flies North at 40m/s. The windblows to the East at 15m/s. Calculate theoverall velocity.
2i". A falling ball has a weight of 10Nand
and air resistance of 2N. What the e#ectivedownward force on it?
ii"A wind blows to the left with a force of2N. Using a vector diagram, calculate theresultant force on the ball.
EnergyForms
ElasticPotentialEnergy
Heat
Kinetic
Electricity
Sound
GravitationalPotentialEnergy
Chemical
PotentialEnergy
Light
49
50
51
18
-
8/13/2019 iGCSE Notes Numbered
21/245
Energy Transfers
When any physical process takes place, there is a transferof energy from one form to another.
This can be shown in an energy flow diagram:
T.VElectricity
Light
Sound
Heat
Examples of Energy Transfers
A burning match
A lightbulb
A petrol lawnmower
A car
Headphones
A microphone
A waterfall
Kinetic Energy
All objects that are moving have kinetic energy.
It depends on the mass of the object and its speed.
It is measured in joules.
KE =1
2
mv2
52
53
54
19
-
8/13/2019 iGCSE Notes Numbered
22/245
Gravitational Energy
Gravitational energy is stored in objects thatare at a height.
It depends upon the mass of the object, andhow high the object is.
It measured in joules.
GPE =mgh
The Principle of theConservation of Energy
Energy cannot be created or destroyed, it simplymoves from one form to another.
When energy moves from one form to another, thetotal AMOUNT of energy remains the same.
A certain amount of heat energy is always lost to thesurroundings in any process.
E&ciency E&ciency tells us how e#ective a process or energy transfer is.
The more useful energy that is produced, for the least input energy, themore e&cient the process is.
E&ciency has no unit, and can be expressed as a decimal or percentage.
It can be the ratio of power output to input, or energy output to inputfor a process
Efficiency =output
input(!100)
55
56
57
20
-
8/13/2019 iGCSE Notes Numbered
23/245
Work Done
Work is a type of energy change and is measuredin Joules.
For work to be done, a force must be acting uponan object as it moves through a distance.
The Work Done is given by:
Work Done (J)=Force(N)! Distance(m)
Power Power is the rate at which energy is transferred.
It is also the rate at which Work is done.
The unit for Power is Watts !W".
Power is calculated from either:
or
Power(W)= Energy Change(J)Time Taken(s)
Power(W)=Work Done(J)
Time Taken(s)
Calculating Personal Power
Measure your weight in newtons.
Measure the height of the steps in metres.
Measure the time taken to climb the steps in seconds.
Calculate the Work Done in joules.
Calculate the Power of your legs in Watts.
heighttime
weight
58
59
60
21
-
8/13/2019 iGCSE Notes Numbered
24/245
Pressure
Pressure tells us how concentrated a force is.
It is calculated from:
or
Stick to one set of units
Pressure(N m2)=Force(N)
Area(m2)
Pressure(N cm2)=
Force(N)
Area(cm2)
Examples
1. Calculate the Volume of the block.
2. Calculate the blocks density.
3. Calculate the blocks weight.
4. Calculate the area in contact with the ground.
1c!
1c!
2c!
20g
Examples
Why do camels have large flat feet?
Why is it easier to walk in snow shoes in the snow?
61
62
63
22
-
8/13/2019 iGCSE Notes Numbered
25/245
Pressure in Liquids
Pressure in a liquid is due tothe weight of the liquidabove a point.
Pressure increases withdepth.
Pressure will also increasewith density of liquid!more weight".
We can calculate pressurefrom:
P = !gd
Direction
The pressure in a liquid actsin ALL directions equally at apoint.
This is why bubbles arespherical.
Questions
1a". Draw a diagram of the cross section of a dam.
b" Explain why it has this shape.
2. Calculate the pressure on a scuba diver at a depthof 20!. !The density of water is 1000kg/!3"
3. Describe a demonstration to show that Pressureincreases with depth in a liquid.
64
65
66
23
-
8/13/2019 iGCSE Notes Numbered
26/245
Non$Renewable EnergyResources
Non$Renewable resources are resources that areused up and cannot be easilyreplaced. Examples arefossil fuels and Nuclear fuels.
Renewable Energy Resources
Renewable Energy Resources are energy resourcesthat keep running and do not run$out easily.
The EnergyCrisis
Transport
Electricity
Fossil Fuels
Pollution
Depletion
Energy usage
Energy
Density
Pollution
Safety
Nuclear Fission
Renewable
Alternatives
Advantages
Unrel iable
Not Controllable
Energy Density
Nuclear Fusion
Safety Pollution
Problems
67
68
69
24
-
8/13/2019 iGCSE Notes Numbered
27/245
General PhysicsQuantity and
symbolDefinition/Word equation
Symbol
equationUnits
Scalar Quantities Scalar quantities only have a magnitude.
Vector Quantities Vector quantities have a magnitude, a directionand a point of application.
Average Speed, s
Speed is the rate of change of distance. It is ascalar quantity.
Speed = Total distance
Total time
For constant acceleration situations, the
average speed is also equal to the average of
the initial and final speeds.
s = initial speed + final speed
2
s = dt
s = u + v
2
m/s
cm/s
km/h
Velocity
Velocity is the rate of change of displacement.
It is speed in a given direction. A vector
quantity.
m/s
cm/s
km/h
Acceleration, a
Acceleration is the rate of change of velocity.
Acceleration = Final velocity initial velocity
Time
a = v u
tm/s
2
Mass, mMass is a property of a body that resists change
in motion.
Weight, W, F
Weight is the force on a mass due to the
gravitational field of the Planet. It changes
from planet to planet. Weights can becompared using a balance.
Weight = mass x acceleration due to gravityWeight = mass x gravitational field strength
W = m x g Newtons,N
Density, !
Density is the mass per unit volume.Density = mass
volume
!= m
V
Kg/m3
g/cm3
Force, F
A force is a push or a pull; it can change the
shape, direction, and/or speed of an object.Force = mass x acceleration
F = m aNewtons,
N
Load, (Hookes
law)
Load = spring constant x extension
Load "extension
F = k l
F " l
Newtons,
N
Moment
A moment is the turning affect of a force.
Moment = force x perpendicular distance from
the pivot
Moment = F d Nm
Equilibrium
When there is no resultant force AND no
resulting turning affect, a system is in
equilibrium.
Work done, W, EWork done = Force x distance in the direction
of the force = change in energyW = F d = #E Joules, J
Kinetic energy,
KE
Kinetic energy is the energy of a body due to
its motion.
Kinetic energy = $x mass x velocity2KE = $m v
2 Joules, J
25
-
8/13/2019 iGCSE Notes Numbered
28/245
Gravitational
energy, GPE
Gravitational potential energy is the energy of
a body due to its position in the gravitational
field.
Gravitational energy =mass x acceleration due
to gravity x height gained/lost
GPE = m g h Joules, J
Efficiency Efficiency = useful output x 100%total input
%
Power, P
Power is the rate at which energy is converted.
Power = work done
time takenPower = energy change
time taken
P = E
tWatts, W
Pressure, p, PPressure = force
area
P = F
A
N/m2
Pascals,Pa
millibar
Fluid Pressure, p,
P
Pressure = density of fluid x acceleration due
to gravity x height of fluid aboveP = !g h
N/m2
Pascals,Pa
Millibar
26
-
8/13/2019 iGCSE Notes Numbered
29/245
iGCSE Physics
Past Paper Questions
Paper 1 Compilation
General Physics
27
-
8/13/2019 iGCSE Notes Numbered
30/245
2
0625/1/M/J/02
1 The diagram shows the level of liquid in a measuring cylinder.
What is the volume of the liquid?
A 24 cm3 B 28 cm3 C 29 cm3 D 32 cm3
2 A cylindrical can is rolled along the ruler shown in the diagram.
The can rolls over twice.
What is the circumference (distance all round) of the can?
A 13 cm B 14 cm C 26 cm D 28 cm
0cm 5 10 15 20 25 30cm
mark oncan
can rolled
starting position final position
30
20
cm3
liquid
1.
2.
28
-
8/13/2019 iGCSE Notes Numbered
31/245
3
0625/1/M/J/02 [Turn over
3 The graph shows how the speed of a car changes with time.
Which of the following gives the distance travelled in time interval OR?
A the area OPQR
B the length PQ
C the length (QR PO)
D the ratio QR/PO
4 A snail crosses a garden path 30 cm wide at a speed of 0.2 cm/s.
How long does the snail take?
A 0.0067s B 6.0 s C 15 s D 150s
5 What are correct units used for mass and for weight?
30cmmovementof snail
snail
speed
P
Q
RO time
mass weight
A kg kg
B kg N
C N kg
D N N
3.
4.
5.
29
-
8/13/2019 iGCSE Notes Numbered
32/245
4
0625/1/M/J/02
6 Two objects X and Y are placed on a beam as shown. The beam balances on a pivot at itscentre.
What does this show about X and Y?
A They have the same mass and the same density.
B They have the same mass and the same weight.
C They have the same volume and the same density.
D They have the same volume and the same weight.
7 A shop-keeper places two identical blocks of cheese on a set of scales and notices that theircombined mass is 240 g. Each block measures 2.0cm x 5.0 cm x 10.0 cm.
What is the density of the cheese?
A 0.42g/cm3 B 0.83g/cm3 C 1.2g/cm3 D 2.4g/cm3
8 The table shows the length of a wire as the load on it is increased.
Which subtraction should be made to find the extension caused by the 20 N load?
A 54.1 cm 0cm
B 54.1 cm 50.0cm
C 54.1 cm 52.1cm
D 56.3 cm 54.1cm
g
X
Y
pivot
load / N 0 10 20 30
length / cm 50.0 52.1 54.1 56.3
6.
7.
8.
30
-
8/13/2019 iGCSE Notes Numbered
33/245
5
0625/1/M/J/02 [Turn over
9 A child tries to push over a large empty oil drum.
Where should the drum be pushed to topple it over with least force?
10 Which device is designed to convert chemical energy into kinetic energy (energy of motion)?
A an a.c. generator
B a battery-powered torch
C a car engine
D a wind-up mechanical clock
11 A ball is released from rest and rolls down a track from the position shown.
What is the furthest position the ball could reach?
ball
startshere
A
B
C
D
A B C D
9.
10.
11.
31
-
8/13/2019 iGCSE Notes Numbered
34/245
6
0625/1/M/J/02
12 Two sharp nails and two blunt nails are held on a piece of wood. Each nail is hit with the samehammer with the same amount of force.
When it is hit, which nail causes the greatest pressure on the wood?
13 The diagram shows a manometer connected to a container of carbon dioxide.
Which statement correctly describes the pressure exerted by the carbon dioxide?
A It is equal to the atmospheric pressure.
B It is equal to 5cm of mercury.
C It is equal to 5 cm of mercury above atmospheric pressure.
D It is equal to 5 cm of mercury below atmospheric pressure.
carbon dioxide
container
mercury
manometer
5cm
A B
hammer
sharp nails
C Dhammer
blunt nails
12.
13.
32
-
8/13/2019 iGCSE Notes Numbered
35/245
2
0625/01/M/J/03
1 A glass tank contains some water.
The length QR and the width RS of the tank are known.
What other distance needs to be measured in order to be able to calculate the volume of the
water?
A ST B SV C TU D TV
2 A stopwatch is used to time a race. The diagrams show the watch at the start and at the end of therace.
How long did the race take?
A 45.7s B 46.0s C 46.5s D 47.0s
45
30
15
seconds
start
50
55 60 5
10
20
2535
40
45
30
15
seconds
end
50
55 60 5
10
20
2535
40
water
Q
R
S
T
V
U
14.
15.
33
-
8/13/2019 iGCSE Notes Numbered
36/245
3
0625/01/M/J/03 [Turn over
3 The diagram shows a speed-time graph for a body moving with constant acceleration.
What is represented by the shaded area under the graph?
A acceleration
B distance
C speed
D time
4 A tunnel has a length of 50km. A car takes 20min to travel between the two ends of the tunnel.
What is the average speed of the car?
A 2.5km/h
B 16.6km/h
C 150km/h
D 1000km/h
5 Which statement is correct?
A Mass is a force, measured in kilograms.
B Mass is a force, measured in newtons.
C Weight is a force, measured in kilograms.
D Weight is a force, measured in newtons.
speed
time0
0
16.
17.
18.
34
-
8/13/2019 iGCSE Notes Numbered
37/245
4
0625/01/M/J/03
6 Three children, X, Y and Z, are using a see-saw to compare their weights.
Which line in the table shows the correct order of the childrens weights?
7 What apparatus is needed to determine the density of a regularly-shaped block?
A a balance and a ruler
B a balance and a forcemeter (spring balance)
C a measuring cylinder and a ruler
D a measuring cylinder and a beaker
8 A spring is suspended from a stand. Loads are added and the extensions are measured.
Which graph shows the result of plotting extension against load?
00
extension
load
A
00
extension
load
B
00
extension
load
C
00
extension
load
D
spring
stand
loadsrule
X Y Y Z X Z
heaviest lightest
A X Y Z
B X Z Y
C Y X Z
D Y Z X
19.
20.
21.
35
-
8/13/2019 iGCSE Notes Numbered
38/245
5
0625/01/M/J/03 [Turn over
9 A student uses a stand and clamp to hold a flask of liquid.
Which diagram shows the most stable arrangement?
10 What is the source of the energy converted by a hydro-electric power station?
A hot rocks
B falling water
C oil
D waves
11 A labourer on a building site lifts heavy concrete blocks onto a lorry. Lighter blocks are now lifted
the same distance in the same time.
What happens to the work done in lifting each block and the power exerted by the labourer?
A B C D
work done in power exerted bylifting each block labourer
A decreases decreases
B decreases remains the same
C increases increases
D remains the same increases
22.
23.
24.
36
-
8/13/2019 iGCSE Notes Numbered
39/245
6
0625/01/M/J/03
12 The diagram shows an instrument used to measure gas pressure.
What is the instrument called?
A ammeter
B barometer
C manometer
D thermometer
13 The diagrams show two divers swimming in the sea and two divers swimming in fresh water. Seawater is more dense than fresh water.
On which diver is there the greatest pressure?
14 When water evaporates, some molecules escape.
Which molecules escape?
A the molecules at the bottom of the liquid with less energy than others
B the molecules at the bottom of the liquid with more energy than others
C the molecules at the surface with less energy than others
D the molecules at the surface with more energy than others
fresh waterC
D
2m
0m
4m
6m
sea waterA
B
2m
0m
4m
6m
liquid
25.
26.
27.
37
-
8/13/2019 iGCSE Notes Numbered
40/245
2
U CLE S 2004 0625/01/M/J/04
1 The diagram shows a measuring cylinder.
10
20
30
40
50
60
70
80
90
100
Which unitwou ld be mostsuitable for its sca le?
A mm2 B mm3 C cm2 D cm 3
2 A piece ofcotton is measured between two points on a ruler .
1cm 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
cotton
When the leng th ofcotton is wound clos e ly around a pen ,itgoe s round six times.
pen six turns of cotton
Wha tis the distance once round the pen?
A 2.2 cm B 2.6 cm C 13 .2 cm D 15 .6 cm
28.
29.
38
-
8/13/2019 iGCSE Notes Numbered
41/245
3
UCLES 2004 0625/01/M/J/04 [Turn over
3 The diagram shows the speed-time graph for an object moving at constant speed.
2
00 3 4
time/s
speed
m / s
1
1 2
What is the distance travelled by the object in the first 3 s?
A 1.5m B 2.0m C 3.0m D 6.0m
4 A small steel ball is dropped from a low balcony.
Ignoring air resistance, which statement describes its motion?
A It falls with constant acceleration.
B It falls with constant speed.
C It falls with decreasing acceleration.
D It falls with decreasing speed.
5 Which statement about the mass of a falling object is correct?
A It decreases as the object falls.
B It is equal to the weight of the object.
C It is measured in newtons.
D It stays the same as the object falls.
30.
31.
32.
39
-
8/13/2019 iGCSE Notes Numbered
42/245
4
UCLES 2004 0625/01/M/J/04
6 The weights of four objects, 1 to 4, are compared using a balance.
1
2
3
2 4
2
Which object is the lightest?
A object 1 B object 2 C object 3 D object 4
7 Which of the following is a unit of density?
A cm3 / g
B g/cm2
C g/cm3
D kg/m2
8 A piece of card has its centre of mass at M.
Which diagram shows how it hangs when suspended by a thread?
A B C D
M M
M
M
9 An experiment is carried out to measure the extension of a rubber band for different loads.
The results are shown below.
load /N 0 1 2 3
length / cm 15.2 16.2 18.6
extension / cm 0 1.0 2.1 3.4
Which figure is missing from the table?
A 16.5 B 17.3 C 17.4 D 18.3
33.
34.
35.
36.
40
-
8/13/2019 iGCSE Notes Numbered
43/245
5
UCLES 2004 0625/01/M/J/04 [Turn over
10 The diagram shows a man d iving into water .
Which form ofenergy is increasing as he fa lls?
A chemica l
B gravitation a l
C kine tic
D stra in
11 A boy and a girlrun up a hill in the same time .
boy weighs 600 N girl weighs 500 N
The boy we ighs more than the girl.
Which statementis true aboutthe power produced?
A The boy produces more power.
B The girlproduces more power.
C They both produce the same power.
D Itis impossible to te llwho produces more power.
36.
37.
38.
41
-
8/13/2019 iGCSE Notes Numbered
44/245
6
U CLE S 2004 0625/01/M/J/04
12 The diagram shows a s imp le mercury barometer .The barome ter rea ding is h cm ofmercury.
mercury
S
h
Whatis the pressure a tS?
A approximate ly zero
B atmospheric pressure
C atmospheric pressure + h cm ofmercury
D h cm ofmercury
13 Two boys X and Y e ach have the same tota lwe igh tand are stand ing on softground.
X Y
Which boy is more like ly to sink into the softground and why?
boy more
like ly to sink
pressure on softground
A X larger than Y
B X sma ller than Y
C Y larger than X
D Y sma ller than X
39.
40.
41.
42
-
8/13/2019 iGCSE Notes Numbered
45/245
2
UCLES 2005 0625/01/M/J/05
1 A decorator wishes to calculate the area of a bathroom tile so that he can estimate the amount ofadhesive that he needs to buy.
What must he use?
A a measuring cylinder only
B a ruler only
C a measuring cylinder and a clock only
D a measuring cylinder and a ruler only
2 The three balls shown are dropped from a bench.
aluminium lead wood
Which balls have the same acceleration?
A aluminium and lead only
B aluminium and wood only
C lead and wood only
D aluminium, lead and wood
3 A car accelerates from traffic lights. The graph shows how the cars speed changes with time.
time/s
20
100 0
speed
m/s
How far does the car travel before it reaches a steady speed?
A 10m B 20m C 100m D 200m
42.
43.
44.
43
-
8/13/2019 iGCSE Notes Numbered
46/245
3
UCLES 2005 0625/01/M/J/05 [Turn over
4 Which statement is correct?
A The mass of a bottle of water at the North Pole is different from its mass at the Equator.
B The mass of a bottle of water is measured in newtons.
C The weight of a bottle of water and its mass are the same thing.
D The weight of a bottle of water is one of the forces acting on it.
5 Two blocks X and Y are placed on a beam as shown. The beam balances on a pivot at its centre.
XY
pivot
What does this show about X and Y?
A They have the same mass and the same density.
B They have the same mass and the same weight.
C They have the same volume and the same density.
D They have the same volume and the same weight.
6 The masses of a measuring cylinder before and after pouring some liquid into it are shown in thediagram.
200
100
cm3
mass = 80 g
200
100
cm3
mass = 180 g
liquid
What is the density of the liquid?
A120
100g/cm3 B
140
100g/cm3 C
120
180g/cm3 D
140
180g/cm3
45.
46.
47.
44
-
8/13/2019 iGCSE Notes Numbered
47/245
4
UCLES 2005 0625/01/M/J/05
7 A girl and a boy are pulling in opposite directions on a rope. The forces acting on the rope areshown in the diagram.
200N
rope
150N
girl boy
Which single force has the same effect as the two forces shown?
A 50N acting towards the girl
B 350N acting towards the girl
C 50N acting towards the boyD 350N acting towards the boy
8 Objects with different masses are hung on a 10 cm spring. The diagram shows how much thespring stretches.
100g
M
10cm
20cm
30cm
The extension of the spring is directly proportional to the mass hung on it.
What is the mass of object M?
A 110g B 150g C 200g D 300g
48.
49.
50.
45
-
8/13/2019 iGCSE Notes Numbered
48/245
5
UCLES 2005 0625/01/M/J/05 [Turn over
9 What is designed to change electrical energy into kinetic energy?
A capacitor
B generator
C motor
D transformer
10 A power station uses nuclear fission to obtain energy.
In this process, nuclear energy is firstchanged into
A chemical energy.
B electrical energy.
C gravitational energy.
D internal energy.
11 A ball is released from rest and rolls down a track from the position shown.
What is the furthest position the ball could reach?
A
B
C
D
ball
starts
here
51.
52.
53.
46
-
8/13/2019 iGCSE Notes Numbered
49/245
6
UCL ES 2005 0625/01/M/J/05
12 A water manometer is used to measure the pressure of a gas supply to a house. It gives areading of hcm of water.
gassupply
hcm
Why is it better to use water rather than mercury in this manometer?
A hwould be too large if mercury were used.
B hwould be too small if mercury were used.
C The tube would need to be narrower if mercury were used.
D The tube would need to be wider if mercury were used.
13 A farmer has two carts. The carts have the same weight, but one has four narrow wheels and theother has four wide wheels.
narrow wheel wide wheel
In rainy weather, which cart sinks l essinto soft ground, and why?
cart wheels why
A narrow greater pressure on the ground
B narrow less pressure on the ground
C wide greater pressure on the ground
D wide less pressure on the ground
54.
55.
56.
47
-
8/13/2019 iGCSE Notes Numbered
50/245
2
UCLES 2006 0625/01/M/J/06
1 A measuring cylinder contains some water. When a stone is put in the water, the level rises.
150
100
50
cm3
150
100
50
cm3
200 200
stone
What is the volume of the stone?
A 50cm3 B 70cm3 C 75cm3 D 125cm3
2 The graph represents the movement of a body accelerating from rest.
1 2 3 4 5
10
8
6
4
2
0
time/s
speed
m/s
After 5 seconds how far has the body moved?
A 2m B 10m C 25m D 50m
3 A child is standing on the platform of a station, watching the trains.
A train travelling at 30m/s takes 3s to pass the child.
What is the length of the train?
A 10m B 30m C 90m D 135m
57.
58.
59.
48
-
8/13/2019 iGCSE Notes Numbered
51/245
3
UCLES 2006 0625/01/M/J/06 [Turn over
4 Below are four statements about the effects of forces on objects.
Three of the statements are correct.
Which statement is incorrect?
A A force can change the length of an object.B A force can change the mass of an object.
C A force can change the shape of an object.
D A force can change the speed of an object.
5 A simple balance has two pans suspended from the ends of arms of equal length. When it isbalanced, the pointer is at 0.
0
pointer
pan X pan Y
armpivot
Four masses (in total) are placed on the pans, with one or more on pan X and the rest on pan Y.
Which combination of masses can be used to balance the pans?
A 1g, 1g, 5g, 10g
B 1g, 2g, 2g, 5g
C 2g, 5g, 5g, 10g
D 2g, 5g, 10g, 10g
6 A person measures the length, width, height and mass of a rectangular metal block.
Which of these measurements are needed in order to calculate the density of the metal?
A mass only
B height and mass only
C length, width and height only
D length, width, height and mass
60.
61.
62.
49
-
8/13/2019 iGCSE Notes Numbered
52/245
4
UCLES 2006 0625/01/M/J/06
7 Two forces act on an object.
In which situation is it impossiblefor the object to be in equilibrium?
A The two forces act in the same direction.
B The two forces act through the same point.
C The two forces are of the same type.
D The two forces are the same size.
8 The diagram shows four models of buses placed on different ramps.
centre
of mass
centre
of mass
centre
of mass
centre
of mass
How many of these models will fall over?
A 1 B 2 C 3 D 4
9 Which form of energy do we receive directly from the Sun?
A chemical
B light
C nuclear
D sound
10 A labourer on a building site lifts a heavy concrete block onto a lorry. He then lifts a light block thesame distance in the same time.
Which of the following is true?
work done in lifting theblocks
power exerted by labourer
A less for the light block less for the light block
B less for the light block the same for both blocks
C more for the light block more for the light block
D the same for both blocks more for the light block
63.
64.
65.
66.
50
-
8/13/2019 iGCSE Notes Numbered
53/245
5
UCL ES 2006 0625/01/M/J/06 [Turn over
11 The diagram shows a thick shee to fg lass .
Which edge mustits tand on to cause the greatestpressure?
A
D
C
B
12 A manometer is be ing used to measure the pressure of the gas ins ide a tank . A, B, C and Dshow the manometer atd ifferenttimes.
A twhich time is the ga s pressure ins ide the tank grea test?
gas
A B C D
13 Brownian motion is seen by looking atsmoke particles through a m icroscope .
How do the smoke particles move in Brownian motion?
A a llin the same dire ction
B a trandomC in circ les
D vibrating aboutfixed points
67.
68.
51
-
8/13/2019 iGCSE Notes Numbered
54/245
iGCSE Physics
Past Paper Questions
Paper 3 Compilation
General Physics
52
-
8/13/2019 iGCSE Notes Numbered
55/245
2
0625/3/M/J/02
1 A group of students attempts to find out how much power each student can generate. Thestudents work in pairs in order to find the time taken for each student to run up a flight ofstairs.The stairs used are shown in Fig. 1.1.
Fig. 1.1
(a) Make a list of all the readings that would be needed. Where possible, indicate how theaccuracy of the readings could be improved.
..........................................................................................................................................
..........................................................................................................................................
..........................................................................................................................................
..........................................................................................................................................
..........................................................................................................................................
..................................................................................................................................... [4]
(b) Using words, not symbols, write down all equations that would be needed to work outthe power of a student.
..........................................................................................................................................
..........................................................................................................................................
..................................................................................................................................... [2]
(c) (i) When the student has reached the finishing point and is standing at the top of thestairs, what form of energy has increased to its maximum?
...................................................................................................................................
(ii) Suggest why the total power of the student is greater than the power calculated bythis method.
...................................................................................................................................
...................................................................................................................................[3]
starting point
finishing point
For
Examiners
Use
1.
53
-
8/13/2019 iGCSE Notes Numbered
56/245
3
0625/3/M/J/02 [Turn over
2 A small rubber ball falls vertically, hits the ground and rebounds vertically upwards.Fig. 2.1 is the speed-time graph for the ball.
Fig. 2.1
(a) Using information from the graph, describe the following parts of the motion of the ball.
(i) part AB
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
(ii) part DE
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................[3]
(b) Explain what is happening to the ball along the part of the graph from B through C to D.
..........................................................................................................................................
..........................................................................................................................................
..................................................................................................................................... [2]
(c) Whilst the ball is in contact with the ground, what is the
(i) overall change in speed,
change in speed = ........................................
(ii) overall change in velocity?
change in velocity = ......................................[2]
10
8
6
4
2
00
0.5 1.0 1.5 2.0time/s
speed
m/ s
B
D
C EA
For
Examiners
Use
2.
54
-
8/13/2019 iGCSE Notes Numbered
57/245
4
0625/3/M/J/02
(d) Use your answer to (c) to explain the difference between speed and velocity.
..........................................................................................................................................
..........................................................................................................................................
..................................................................................................................................... [2]
(e) Use the graph to calculate the distance travelled by the ball between D and E.
distance travelled = ..................................[2]
(f) Use the graph to calculate the deceleration of the ball between D and E.
deceleration = ..................................[2]
For
Examiners
Use
55
-
8/13/2019 iGCSE Notes Numbered
58/245
2
0625/3/M/J/03
1 Fig. 1.1 shows apparatus that may be used to compare the strengths of two springs of thesame size, but made from different materials.
Fig. 1.1
(a) (i) Explain how the masses produce a force to stretch the spring.
...................................................................................................................................
(ii) Explain why this force, like all forces, is a vector quantity.
...................................................................................................................................
...................................................................................................................................[2]
(b) Fig. 1.2 shows the graphs obtained when the two springs are stretched.
Fig. 1.2
00
5
10
15
20force/N
10 20 30 40
extension/mm
spring 1pringspring 2pring
spring 1
spring 2
spring
masses
scale
For
Examiners
Use
3.
56
-
8/13/2019 iGCSE Notes Numbered
59/245
3
0625/3/M/J/03 [Turn over
(i) State which spring is more difficult to extend. Quote values from the graphs tosupport your answer.
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
(ii) On the graph of spring 2, mark a point P at the limit of proportionality. Explain yourchoice of point P.
...................................................................................................................................
...................................................................................................................................
...................................................................................................................................
(iii) Use the graphs to find the difference in the extensions of the two springs when aforce of 15N is applied to each one.
difference in extensions = ..................................[6]
2 The speed of a cyclist reduces uniformly from 2.5 m/s to 1.0m/s in 12 s.
(a) Calculate the deceleration of the cyclist.
deceleration = ..................................[3]
(b) Calculate the distance travelled by the cyclist in this time.
distance = ..................................[2]
For
Examiners
Use
4.
57
-
8/13/2019 iGCSE Notes Numbered
60/245
4
0625/3/M/J/03
3 Fig. 3.1 shows the arm of a crane when it is lifting a heavy box.
Fig. 3.1
(a) By the use of a scale diagram (not calculation) of the forces acting at P, find the weightof the box. [5]
40 30
950N
1220N
P
box
For
Examiners
Use
5.
58
-
8/13/2019 iGCSE Notes Numbered
61/245
5
0625/3/M/J/03 [Turn over
(b) Another box of weight 1500 N is raised vertically by 3.0m.
(i) Calculate the work done on the box.
work done = ..................................
(ii) The crane takes 2.5 s to raise this box 3.0 m. Calculate the power output of thecrane.
power = ..................................
[4]
4 Fig. 4.1 shows a sealed glass syringe that contains air and many very tiny suspended dustparticles.
Fig. 4.1
(a) Explain why the dust particles are suspended in the air and do not settle to the bottom.
..........................................................................................................................................
..........................................................................................................................................
..........................................................................................................................................
......................................................................................................................................[3]
(b) The air in the syringe is at a pressure of 2.0 105 Pa. The piston is slowly moved into thesyringe, keeping the temperature constant, until the volume of the air is reduced from80cm3 to 25 cm3. Calculate the final pressure of the air.
pressure = ..................................[3]
syringe
seal
dust particles
piston
For
Examiners
Use
59
-
8/13/2019 iGCSE Notes Numbered
62/245
2
0625/03 M/J/04
1 Fig. 1.1 shows a cycle track.
Fig. 1.1
A cyclist starts at A and follows the path ABCDEB.
The speed-time graph is shown in Fig. 1.2.
Fig. 1.2
(a) Use information from Fig. 1.1 and Fig.1.2 to describe the motion of the cyclist
(i) along AB,
...................................................................................................................................
(ii) along BCDEB.
...................................................................................................................................
...................................................................................................................................[4]
0
1
0
2
3
4
5
6
30 40 5010 20 60 70 80 90 100
time/s
speed
m/s
A
B C D E B
A B
E C
D
v= 6 m/s
For
Examiners
Use
UCLES 2004
6.
60
-
8/13/2019 iGCSE Notes Numbered
63/245
3
0625/03 M/J/04 [Turn over
(b) The velocity v of the cyclist at C is shown in Fig.1.1.
State one similarity and one difference between the velocity at C and the velocity at E.
similarity ...........................................................................................................................
difference ......................................................................................................................[2]
(c) Calculate
(i) the distance along the cycle track from A to B,
distance =
(ii) the circumference of the circular part of the track.
circumference = [4]
For
Examiners
Use
UCLES 2004
61
-
8/13/2019 iGCSE Notes Numbered
64/245
4
0625/03 M/J/04
2 Fig. 2.1 shows a rock that is falling from the top of a cliff into the river below.
Fig. 2.1
(a) The mass of the rock is 75 kg. The acceleration of free fall is 10m/s2.Calculate the weight of the rock.
weight = [1]
(b) The rock falls from rest through a distance of 15 m before it hits the water.Calculate its kinetic energy just before hitting the water. Show your working.
kinetic energy = [3]
(c) The rock hits the water. Suggest what happens to the kinetic energy of the rock duringthe impact.
..........................................................................................................................................
..........................................................................................................................................
......................................................................................................................................[3]
cliff
fallingrock
river
For
Examiners
Use
UCLES 2004
7.
62
-
8/13/2019 iGCSE Notes Numbered
65/245
5
0625/03 M/J/04 [Turn over
3 A large spring is repeatedly stretched by an athlete to increase the strength of his arms.Fig. 3.1 is a table showing the force required to stretch the spring.
Fig. 3.1
(a) (i) State Hookes law.
...................................................................................................................................
...............................................................................................................................[1]
(ii) Use the results in Fig. 3.1 to show that the spring obeys Hookes law.
[1]
(b) Another athlete using a different spring exerts an average force of 400 N to enable herto extend the spring by 0.210 m.
(i) Calculate the work done by this athlete in extending the spring once.
work done =
(ii) She is able to extend the spring by this amount and to release it 24 times in 60 s.Calculate the power used by this athlete while doing this exercise.
power = [4]
For
Examiners
Use
UCLES 2004
extension of spring/m 0.096 0.192 0.288 0.384
force exerted to produce extension/N 250 500 750 1000
8.
63
-
8/13/2019 iGCSE Notes Numbered
66/245
2
0625/03/M/J/05
1 A solid plastic sphere falls towards the Earth.
Fig. 1.1 is the speed-time graph of the fall up to the point where the sphere hits the Earthssurface.
Fig. 1.1
(a) Describe in detail the motion of the sphere shown by the graph.
..........................................................................................................................................
..........................................................................................................................................
..........................................................................................................................................
..........................................................................................................................................
..................................................................................................................................... [3]
0
20
P
Q
R S T
40
60
80
100
120
140
speedm/s
100 20 30 40 50 60 70 80 90 100 110
time/s
For
Examiners
Use
UCLES 2005
9.
64
-
8/13/2019 iGCSE Notes Numbered
67/245
3
0625/03/M/J/05 [Turn over
(b) On Fig. 1.2, draw arrows to show the directions of the forces acting on the sphere whenit is at the position shown by point S on the graph. Label your arrows with the names ofthe forces. [2]
Fig. 1.2
(c) Explain why the sphere is moving with constant speed at S.
..........................................................................................................................................
..........................................................................................................................................
..................................................................................................................................... [2]
(d) Use the graph to calculate the approximate distance that the sphere falls
(i) between R and T,
distance = . [2](ii) between P and Q.
distance = . [2]
For
Examiners
Use
UCLES 2005
65
-
8/13/2019 iGCSE Notes Numbered
68/245
4
0625/03/M/J/05
2 Fig. 2.1 shows a simple pendulum that swings backwards and forwards between P and Q.
Fig. 2.1
(a) The time taken for the pendulum to swing from P to Q is approximately 0.5 s.
Describe how you would determine this time as accurately as possible.
..........................................................................................................................................
..........................................................................................................................................
..................................................................................................................................... [2]
(b) (i) State the two vertical forces acting on the pendulum bob when it is at position R.
1. ...............................................................................................................................
2. .......................................................................................................................... [1]
(ii) The pendulum bob moves along the arc of a circle. State the direction of theresultant of the two forces in (i).
.............................................................................................................................. [1]
(c) The mass of the bob is 0.2 kg. During the swing it moves so that P is 0.05 m higher
than R.
Calculate the increase in potential energy of the pendulum bob between R and P.
potential energy = . [2]
support
string
pendulum bobP
R Q
For
Examiners
Use
UCLES 2005
10.
66
-
8/13/2019 iGCSE Notes Numbered
69/245
5
0625/03/M/J/05 [Turn over
3 A mass of 3.0kg accelerates at 2.0m/s2 in a straight line.
(a) State why the velocity and the acceleration are both described as vector quantities.
..........................................................................................................................................
..................................................................................................................................... [1]
(b) Calculate the force required to accelerate the mass.
force = . [2]
(c) The mass hits a wall.
The average force exerted on the wall during the impact is 120 N.The area of the mass in contact with the wall at impact is 0.050 m2.Calculate the average pressure that the mass exerts on the wall during the impact.
pressure = . [2]
For
Examiners
Use
UCLES 2005
11.
67
-
8/13/2019 iGCSE Notes Numbered
70/245
2
0625/03/M/J/06
For
Examiners
Use
UCLES 2006
1 A bus travels from one bus stop to the next. The journey has three distinct parts. Stated inorder they are
uniform acceleration from rest for 8.0 s, uniform speed for 12 s, non-uniform deceleration for 5.0 s. Fig. 1.1 shows only the deceleration of the bus.
5
0
10
15
50 10 15 20 25
speed
m/s
time/s
Fig. 1.1
(a) On Fig. 1.1, complete the graph to show the first two parts of the journey. [3]
(b) Calculate the acceleration of the bus 4.0 s after leaving the first bus stop.
acceleration = ........................ [2]
(c) Use the graph to estimate the distance the bus travels between 20 s and 25 s.
estimated distance = ........................ [2]
(d) On leaving the second bus stop, the uniform acceleration of the bus is 1.2 m / s2. Themass of the bus and passengers is 4000 kg.
Calculate the accelerating force that acts on the bus.
force = ........................ [2]
(e) The acceleration of the bus from the second bus stop is less than that from the first busstop.
Suggest two reasons for this.
1. ......................................................................................................................................
..........................................................................................................................................
2. ......................................................................................................................................
......................................................................................................................................[2]
12.
68
-
8/13/2019 iGCSE Notes Numbered
71/245
3
0625/03/M/J/06 [Turn over
For
Examiners
Use
UCLES 2006
2 A student sets up the apparatus shown in Fig. 2.1 in order to find the resultant of the twotensions T1and T2acting at P. When the tensions T1, T2and T3are balanced, the anglesbetween T1and the vertical and T2and the vertical are as marked on Fig. 2.1.
vertical
board
pulley
pulley
6944
P
T1= 6.0N T2= 8.0N
T3
Fig. 2.1
In the space below, draw a scale diagram of the forces T1and T2. Use the diagram to find theresultant of the two forces.
State
(a) the scale used, scale = ........................................
(b) the value of the resultant, value = ........................................
(c) the direction of the resultant. direction = ........................................
[6]
13.
69
-
8/13/2019 iGCSE Notes Numbered
72/245
4
0625/03/M/J/06
For
Examiners
Use
UCLES 2006
3 An electric pump is used to raise water from a well, as shown in Fig. 3.1.
pump
ground
well
Fig. 3.1
(a) The pump does work in raising the water. State an equation that could be used tocalculate the work done in raising the water.
......................................................................................................................................[2]
(b) The water is raised through a vertical distance of 8.0 m. The weight of water raised in5.0 s is 100 N.
(i) Calculate the work done in raising the water in this time.
work done = ....................... [1]
(ii) Calculate the power the pump uses to raise the water.
power = ........................ [1]
(iii) The energy transferred by the pump to the water is greater than your answer to (i).Suggest what the additional energy is used for.
..............................................................................................................................[1]
14.
70
-
8/13/2019 iGCSE Notes Numbered
73/245
Topic 2:Thermal Physics
Solids
The particles in solids are tightly held together by strongforces.
They vibrate around mean positions.
The higher the temperature, the more vibrational kineticenergy the particles have.
Solids have a rigid shape.
Liquids
In liquids the forces are strong, but the vibratingparticles are not fixed in position.
The particles can move but they are held close to theirneighbours.
Liquids do not keep their shape.
1
2
3
71
-
8/13/2019 iGCSE Notes Numbered
74/245
Gases In gases the forces are very weak and they are virtually
free to move around their container.
The particles occasionally collide.
Gases expand to fill their container.
The collisions between the particles and the containerwalls provides pressure.
Changing State
When a material changes from one state to another,bonds are either broken or created.
When bonds are broken, heat must be supplied. Whenbonds are created, heat is released.
When materials change state there is no change in the
temperature.
Phase Changes
The phase change from solid to liquid is called fusion.
The phase change from liquid to gas is calledvaporisation.
The energy required to effect the phase change is calledthe Latent Heat.
The Latent Heat required per kg is called the SpecificLatent Heat.
4
5
6
72
-
8/13/2019 iGCSE Notes Numbered
75/245
Phases Changes !Graphical"
Temperature
Time
fusion
vaporisation
liquid
water
Latent Heat Calculations
The Specific Latent Heat of a material is given the symbol l.
From the definition, we have the following relationship:
H - J
m - kg
l - J/kg
H = ml
Heat Capacity
Whilst a material is being heated within a certain stateof matter, its temperature will rise.
The temperature rise depends upon the mass of thematerial, the type of material and the amount of heatsupplied.
The property of a material that represents how muchheat is needed to raise its temperature is called itsSpecific Heat Capacity and is given the symbol c.
7
8
9
73
-
8/13/2019 iGCSE Notes Numbered
76/245
Calculations To calculate heat required we use:
H - J
m - kg
C - J/kg/C
!T - C
H = mc!T
Constant Volume
If we increase the temperature of a gas in acontainer at a constant volume, the particles
will move with more energy, and so there willbe more collisions, and so greater pressure:
Pressure increases with Temperature
Constant Pressure
If we increase the temperature of a gas in a container ata constant pressure, the particles will move with moreenergy, but they need more space to keep the collisionsconstant and so there will be a greater volume:
Volume increases with Temperature
10
11
12
74
-
8/13/2019 iGCSE Notes Numbered
77/245
Constant Temperature If we keep the temperature of a gas constant, we
keep the kinetic energy of the particles constant.
Decreasing the volume of the gas container willincrease the number of collisions of the particles withthe container.
The pressure of the gas will increase.
Pressure and Volume changes are described by thefollowing relationship:
P1V1 = P
2V2
Brownian Motion
When pollen grains are placed on the surface of aliquid and a strong light source is used to illuminatethe pollen, the pollen is seen to move randomly.
This movement is called Brownian Motion andcause by the invisible water particles hitting thepollen grains.
Expansion
When particles are heated they gain energy.
They become more spaced#out, and the material gets bigger.
We say that the material expands.
Generally, objects expand as they get hotter and contract as they get cooler.
Liquids expand more than solids on heating, and gases expand more than liquids.
Solids expand with the greatest force. Gases expand with the least force.
13
14
15
75
-
8/13/2019 iGCSE Notes Numbered
78/245
Questions on Expansion
Why do walls have expansion joints?
Why are pylon electrical cables tighter in winter?
Why do railway lines leave regular gaps betweenthem?
Temperature Scales
The most common temperature scale that is used is theCelsius scale. This has its zero at the freezing point of water,and the boiling point of water is 100C.
In Physics, the Kelvin scale !or Absolute Temperature scale"isoften used.
This is often more sensible as the zero is defined as the pointat which the particles have no kinetic energy !Absolute Zero".
To convert between Celsius and Kelvin, we add 273C.
A rise of 1K is the same as a rise of 1C.
Internal Energy
The Kelvin Temperature is proportional tothe average kinetic energy of the particles.
16
17
18
76
-
8/13/2019 iGCSE Notes Numbered
79/245
Evaporation
Evaporation is a process by which a liquidcools due to the fact that particles are lostfrom its surface.
The higher energy particles will be morelikely to leave the liquid, so lowering theaverage KE of the particles remaining in theliquid. The temperature will thus belowered.
Increasing the exposed surface area of theliquid, or increasing the movement of air willincrease the rate of evaporation.
Changing State
When a material changes from one state to another,bonds are either broken or created. This involves anassociated Internal Energy change.
When bonds are broken, heat must be supplied.
When bonds are created, Heat is released.
Since the energy changes are entirely Internal, thereis no change in kinetic energy of the particles, andhence no change in the temperature of the material.
Thermometry
To make a thermometer, we need a property thatchanges with temperature in a linear fashion.
We then need to calibrate the thermometer bychoosing two fixed points.
The fixed points for calibration are the boiling pointof water !100C"and the freezing point of water!0C".
The scale is then divided into 100 equal parts forinterpolation.
19
20
21
77
-
8/13/2019 iGCSE Notes Numbered
80/245
Liquid in Glass Thermometers
Liquid in glass thermometers have liquid ina glass bulb. As the liquid is heated itexpands and its level rises up the scale.
The choice of liquid, the thinness of thebore or the size of the bulb will a$ect thesensitivity of the thermometer.
The choice of liquid will a$ect the range ofthe thermometer.
Thermocouple
A thermocouple is a junction of two di$erent metals.
Electrons will move across the junction creating a measurable voltage.
The higher the temperature, the more energy the electrons will have, moreelectrons will move and we get a greater voltage.
The voltage is then calibrated.
High temperatures can be quicklyrecorded.
Heat Transfer
Heat flows from hot areas to cold areas.
In solids, heat moves by conduction.
In liquids and gases !fluids", heat moves byconvection.
In a vacuum heat has to move by radiation.
22
23
24
78
-
8/13/2019 iGCSE Notes Numbered
81/245
Conduction
Heat moves from particle to particle as they collide.
Poor conductors are called insulators.
Solids are the best conductors !especially metals".
Gases are the best insulators.
HeatHeat
Questions on Conduction.
1. Why does a robin flu$up its feathers in Winter?
2. Why is a string vest warmer than a cotton vest?
3. Design an experiment to compare conductors.
Cool fluid ina beaker.
ConvectionWarm fluidexpands and
rises. !lowdensity"
Denser Cool
fluid sinks
Convectioncurrents
circulate theheat.
HeatHeat sourceis applied.
25
26
27
79
-
8/13/2019 iGCSE Notes Numbered
82/245
Questions on Convection
Why should you stay close to the ground in a smoke#filled room?
Why is the heating element at the bottom of a kettle?
Radiation
Infra#redlight energy
emitted..Coolerobject
Hot object!warmer thansurroundings".
Radiation
Black objects are better radiators and absorbers thanwhite or shiny objects.
Rough objects are better radiators and absorbers thanshiny or smooth objects.
28
29
30
80
-
8/13/2019 iGCSE Notes Numbered
83/245
Questions on Radiation
Why are houses often painted white in hotcountries?
Why do marathon runners wear an aluminiumblanket at the end of a race?
The Vacuum Flaskstopper
silversurface
vacuum
31
32
81
-
8/13/2019 iGCSE Notes Numbered
84/245
1
Thermal PhysicsQuantity and
symbolDefinition
Symbol
equationunits
Temperature, T, !
The temperature of a gas is related to the
motion of its particles. The faster, andtherefore the more energetic the particles
the hotter the gas.
oC, K
Brownian Motion
The random, jerky motion of particles
(pollen in water, smoke in air) in a
suspension is evidence for the kinetic model
of matter. The massive particles are moved
by light, fast moving molecules.
Evaporation
The more energetic molecules escape from
the surface of a liquid. This leaves the
liquid left behind with a lower average KE,
and hence a cooler liquid.
Boyles Law
For a fixed mass of gas, the pressure is
inversely proportional to the volume, (at
constant temperature)
P "1
V
PV = k
Charles Law
For a fixed mass of gas, the volume is
directly proportional to the temperature, (at
constant pressure)
V "T
V = k T
Pressure Law
For a fixed mass of gas, the pressure is
directly proportional to the temperature, (at
constant volume)
P "T
P = k T
Gas LawFor a fixed mass of gas, the
Pressure x Volume = a constant
Temperature
PV = kT
P1V1= P2V2T1 T2
Temperature
must be the
absolutetemperature
in Kelvin,K.
The other
quantities
must beconsistent.
Thermal Capacity, cThe amount of heat energy required tochange the temperature of a body by 1 oC
c = E
#TJ/
oC
Specific Heat
Capacity, c
The amount of heat energy required to
change the temperature of a unit mass of a
substance by 1oC
c = Q
m#T
J/kg oC
Jkg oC
Latent Heat, L
The amount of energy required to change
the state of a body without a change in
temperature
J
Specific Latent Heat
of Fusion, L
The amount of energy required to change
the state of unit mass of substance, from
solid to liquid without a change intemperature
L = Q
m
J/kg
J/g
Specific Latent Heat
of Vaporisation, L
The amount of energy required to change
the state of unit mass of a substance from
liquid to gas without a change intemperature
L = Q
m
J/kg
J/g
Conduction
The movement of heat energy by the
passing on of vibrations from particle to
particle.
82
-
8/13/2019 iGCSE Notes Numbered
85/245
2
Convection
The movement of heat energy by the mass
movement of fluids, due to expansion and
density changes due to heating.
RadiationThe movement of heat energy by the form
of an electromagnetic wave. (Infrared)
83
-
8/13/2019 iGCSE Notes Numbered
86/245
-
8/13/2019 iGCSE Notes Numbered
87/245
7
0625/1/M/J/02 [Turn over
14 The diagram represents molecules in a liquid.
A and C are molecules with a high amount of energy.
B and D are molecules with a low amount of energy.
Which molecule is most likely to be leaving the liquid by evaporation?
15 The size of a balloon increases when the pressure inside it increases.
The balloon gets bigger when it is left in the heat from the Sun.
Why does this happen?
A The air molecules inside the balloon all move outwards when it is heated.
B The air molecules inside the balloon are bigger when it is heated.
C The air molecules inside the balloon move more quickly when it is heated.
D The number of air molecules inside the balloon increases when it is heated.
16 What must expand in order to show the temperature rise in a mercury-in-glass thermometer?
A the glass bulb
B the glass stem
C the mercury
D the vacuum
cool balloon hot balloon
A
C D
B
1.
2.
3.
85
-
8/13/2019 iGCSE Notes Numbered
88/245
8
0625/1/M/J/02
17 The table shows the melting points and boiling points of four substances.
Which substance is a liquid at a room temperature of 20 oC?
18 A bar made of half wood and half copper has a piece of paper wrapped tightly round it.
The bar is heated strongly at the centre for a short time, and the paper goes brown on one side
only.
Which side goes brown, and what does this show about wood and copper?
wood paper copper
heat
substance melting point / oC boiling point / oC
A 101 35
B 39 357
C 30 2100
D 327 1750
brown side wood copper
A copper conductor insulator
B copper insulator conductor
C wood conductor insulator
D wood insulator conductor
4.
5.
86
-
8/13/2019 iGCSE Notes Numbered
89/245
9
0625/1/M/J/02 [Turn over
19 The diagrams show part of a water-heating system which is working by convection.
Which diagram shows the most likely flow of water in the system?
20 A drop of water from a tap falls onto the surface of some water of constant depth.
Water waves spread out on the surface of the water.
Which statement is true?
A The waves are longitudinal and travel at the same speed in all directions.
B The waves are longitudinal and travel more quickly in one direction than in others.
C The waves are transverse and travel at the same speed in all directions.
D The waves are transverse and travel more quickly in one direction than in others.
view from above
hotwatertank
boiler
heat
A
hotwatertank
boiler
heat
B
hotwatertank
boiler
heat
C
hotwatertank
boiler
heat
D
19 The diagram shows a heater used to heat a tank of cold water.
What is the main process by which heat moves through the water?
A conduction
B convection
C evaporation
D radiation
water
lagging
tank
heater
6.
7.
87
-
8/13/2019 iGCSE Notes Numbered
90/245
-
8/13/2019 iGCSE Notes Numbered
91/245
8
0625/01/M/J/03
17 The same quantity of heat energy is applied to four different blocks. The temperature riseproduced is shown on each block.
Which block has the highest thermal capacity?
18 A person holds a glass beaker in one hand and fills it quickly with hot water. It takes severalseconds before his hand starts to feel the heat.
Why is there this delay?
A Glass is a poor conductor of heat.
B Glass is a good conductor of heat.
C Water is a poor conductor of heat.
D Water is a good conductor of heat.
A B
C D
temperaturerise is3 C
temperaturerise is9 C
temperaturerise is18 C
temperature
rise is
6 C
10.
11.
89
-
8/13/2019 iGCSE Notes Numbered
92/245
7
UCLES 2004 0625/01/M/J/04 [Turn over
14 A student places his thumb firmly on the outlet of a bicycle pump, to stop the air coming out.
handle
trapped air
direction of
motion
What happens to the pressure and to the volume of the trapped air as the pump handle is pushedin?
pressure volume
A decreases decreases
B decreases remains the same
C increases decreases
D increases remains the same
15 A balloon is inflated in a cold room. When the room becomes much warmer, the balloon becomeslarger.
How does the behaviour of the air molecules in the balloon explain this?
A The molecules become larger.
B The molecules evaporate.
C The molecules move more quickly.
D The molecules repel each other.
19 The diagram shows a block of ice placed in a warm room.
At which point is the temperature the lowest?
!"#$%
&$"'()&%
!
"
#
$
A
CD
B
90
-
8/13/2019 iGCSE Notes Numbered
93/245
8
UCLE S 2004 0625/01/M/J/04
16 A substance is heated at a steady rate. It changes from a solid to a liquid, and then to a gas.
The graph shows how its temperature changes with time.
temperature
time
P
Q
R
S
Which parts of the graph show a change of state taking place?
A P and R
B P and S
C Q and R
D Q and S
17 An engineer wants to fix a steel washer on to a steel rod. The rod is just too big to fit into the holeof the washer.
steel rod
steel
washer
How can the engineer fit the washer onto the rod?
A cool the washer and put it over the rod
B cool the washer and rod to the same temperature and push them together
C heat the rod and then place it in the hole
D heat the washer and place it over the rod
13 Brownian motion is seen by looking at smoke particles through a microscope.
How do the smoke particles move in Brownian motion?
A all in the same direction
B at random
C in circles
D vibrating about fixed points
12.
13.
14.
91
-
8/13/2019 iGCSE Notes Numbered
94/245
9
UCLES 2004 0625/01/M/J/04 [Turn over
18 An experiment is set up to find out which metal is the best conductor of heat. Balls are stuck withwax to rods made from different metals, as shown in diagram X.
The rods are heated at one end. Some of the balls fall off, leaving some as shown in diagram Y.
Which labelled metal is the best conductor of heat?
before heating after heating
h e a t h e a t
diagram X diagram Y
A B C D
19 Thermometer X is held above an ice cube and thermometer Y is held the same distance belowthe ice cube. After several minutes, the reading on one thermometer changes. The ice cube doesnot melt.
ice cube
thermometer X
thermometer Y
Which thermometer reading changes and why?
thermometer reason
A X cool air rises from the ice cube
B X warm air rises from the ice cube
C Y cool air falls from the ice cube
D Y warm air falls from the ice cube
15.
16.
92
-
8/13/2019 iGCSE Notes Numbered
95/245
7
UCLES 2005 0625/01/M/J/05 [Turn over
14 Viewed through a microscope, very small particles can be seen moving with Brownian motion.
Which line in the table is correct?
type of motionof particles
particles aresuspended in
A vibration a liquid or a gas
B vibration a solid, a liquid or a gas
C random a liquid or a gas
D random a solid, a liquid or a gas
15 A measured mass of gas is placed in a cylinder at atmospheric pressure and is then slowlycompressed.
piston pushed in
pistongas
The temperature of the gas does not change.
What happens to the pressure of the gas?
A It drops to zero.
B It decreases, but not to zero.
C It