ig engineering capability statement (2019)
TRANSCRIPT
Engineering Services
1300 232 017 | [email protected] | www.inductiongroup.com.au
Signage, Audit & Engineering Services
1300 232 017 | [email protected] | www.inductiongroup.com.au
2Signage, Audit & Engineering Services 2
ProfileInduction Group specialises in multidisciplinary technical services focused on failure anaysis and
prevention in materials, components, assemblies, systems and infrastructure. Our Materials and
Structural Engineers each have 25+ years of deep experience predicting failure modes and
degredation behaviour, with particular attention to specialised applications, complicated or extreme
service environments and critical assets of high consequence.
Root Cause Forensic Failure Analysis
Incident Investigations
Compliance & Condition Evaluations
Maintenance Program Management
Specification & Remediation
Audit Services
Technical Engineering Assessments and Compliance Reviews – Interpretation of results, standards and codes – Wide array of relevant infrastructure, complex & noteworthy projects
Forensic Failure Analysis / Root Cause Determination – Material, manufacturing, installation, maintenance and service environment – Corrosion modes – Recommendations to prevent recurrence; remediation advice & provision of recovery procedures
Condition Assessments – Corrosion, coatings, structural, materials, concrete & reinforcing, erosion – Building structures, plumbing systems and components
Public and Product Liability Investigations
Structural Design and Forensic Investigations – Residential, industrial and commercial buildings – Site inspection, investigation and determination of cause(s) and extent of building / structural distress – Urgent response for Immediate Make Safe issues – Engineering reports, Scope of Works & tender documents, including upgrade and reinstatements works – Project management and construction phase services
All Engineered Materials, Components, Assemblies, Systems and Infrastructure
1300 232 017 | [email protected] | www.inductiongroup.com.au
3
Core Competencies
Australian, International, Defence & Industry Standards and Codes
1300 232 017 | [email protected] | www.inductiongroup.com.au
Signage, Audit & Engineering Services4 4
Core CompetenciesCorrosion & Erosion Assessment, Identification and Remediation
Concrete & Reinforcing Assessments
Coating Assessments
Testing Services
– Materials, chemical & mechanical; destructive and non destructive (NDT) methods
– Weld procedure verification & integrity testing
Assessment of Suitability for Use
Specification for New or Existing Designs
– Materials, finishes, products, standards, test methods and acceptance criteria
Review & Recommendations on Manufacturing Optimisation
– Forming, machining, thermal treatment, special processing, NDT and surface finishing
Investigations into Aircraft Material and Component Defects & Failures
Expert Witness Services to All Courts
Systems, Assemblies & Components
1300 232 017 | [email protected] | www.inductiongroup.com.au
5
Clear knowledge of the condition of your assets and how they are performing is critical for making intelligent decisions regarding safety, maintenance, rehabilitation and renewal. Condition data and understanding asset failure modes, as well as determination of appropriate frequency and method of inspection relevant to the service provided by the particular asset is key.
– Ascertain state, condition and suitability – Identify potential failure modes, and their likelihood of occurrence – Impact of failure or disrepair, – Take service delivery impact into account
Building Age, Condition & Elements
Plant & Equipment
Some Reticulation Systems
All piped services (sewer, water, & gas)
Paint, powder coating & surface finishing systems
Energy Infrastructure
Classification Body Approved Surveys
– Lloyds Register Approved Service Supplier
Slip Resistance Testing
Asset Registry
Power & Lighting Audits
Signage Audits
Asset Auditing & Condition Monitoring
6Signage, Audit & Engineering Services6
ExperiencePrincipals within the group build on decades of deep experience:
Legal - FM Global, Moray & Agnew, Hall & WIlcox, Suncorp, McLarens Aviation, Hunt & Hunt HWL Ebsworth, Barry Nilsson, Slater & Gordon, Ligeti Partners, Turks Legal, DLA Piper, Maddocks Lawyers, Norton Rose Fulbright, Maddens, Wotton & Kearney, Cunningham Lindsey, Sparke Helmore, Meridian Lawyers and many others.
Buildings and Building Materials - Industrial complexes, High rises, apartment complexes, Aquatic centres, shoppping centres, buildings, bridges, water treatment, food processing, refineries and other structures - Corrosion assessment for mode, mechanism and root cause of bare or galvanized steel pipes, surface corrosion,.concrete reinforcing, structural steel and all other metallic components - Concrete, mortar, paving and plaster failures including concrete cancer, efflorescence, analysis of composition and assessment of fitness for purpose - Forensic assessment of fire and water damaged infrastructure and determination of suitability and durability - Condition assessments on reinforced concrete, exposed steel beams and fasteners - Plastic, steel, stainless steel, copper, brass and ceramic plumbing components and systems, including pressure/non-pressure piping, connectors, valves and brackets - Structural steel assessment for mechanical and material properties - Paint, powder coating and surface finishing systems - Adhesive and sealant characterisation and fitness for purpose determination for building construction, tiles and textured pavers - Ceramic failures, including floor and aquatic centre pool tiles, stone paving and tiling, sanitary ware, piping and windows - Specification of suitable surface finishing - Flooring surfaces
6
Infrastructure, Machinery & Equipment - Healthcare Infrastructure - Manufacturing - Energy - Industrial plants, infrastructure and pipelines - Electrical transmission towers & distribution lines; hardware - Storm Water, Water and Sewerage Infrastructure - Waste Management - Component failures in cranes, machines and pumps including determination of mechanism and cause, and weld assessment to applicable standards - Failure analysis of multiple platform components and coatings, including mining, oil and gas, aircraft and marine
Public and Product Liability - Incident investigations involving machines and equipment and determination of contributing factors - Mechanical failure of equipment such as ladders, playground equipment and chairs - Product recalls, compliance testing and failure analysis - Determination of public lighting conditions, stairs, handrails and balustrades - Wet pendulum and dry floor friction testing of pedestrian surfaces to determine slip resistance, and contribution to slips, trips and falls
Transportation (Rail, Roads, Shipping, Motor Vehicle) - Mechanical failure of all components, including fasteners, suspension, hitch assemblies, wheels, tyres and engine components including pistons, connecting rods, cam shafts, crank shafts, bearings, and transmission and braking systems - Corrosion and erosion failure analysis of engine blocks and cylinder heads Aerospace & Defence - Defence & civil aircraft platforms including Lockheed P3/AP3C Orion, C-130 Hercules, McDonnell Douglas F/A-18, General Dynamics F-111, Boeing 737, 767 & 777, Airbus A320, A330 and A340
1300 232 017 | [email protected] | www.inductiongroup.com.au
7
Experience
Head Office - Australia27 Plunkett Rd, Dandenong VIC 3175
T: 1300 232 017 E: [email protected]
We are very interested in working with you to deliver quality outcomes,and will do whatever it takes to ensure that you want to continue to workwith us.
Should you require any clarification or additional information as to our capabilities, systems, work methodology etc., please do not hesitate to contact us at your convenience.
Signage, Audit & Engineering Services