ics cutting tools, inc · ics cutting tools, inc 511 main street † casco, wi 54205-0125 usa (920)...

ICS CUTTING TOOLS, INC511 Main Street • Casco, WI 54205-0125 USA

(920) 837-2526 • Fax (920) 837-2530www.icscuttingtools.com • [email protected]

SAWING TOOLS INDEX

ABRASIVE CUT-OFF WHEELS ......................................................15 MASONRY CUTTING ..............................................................15 METAL CUTTING ....................................................................15AIR SAW BLADES - 1/2" SHANK ....................................................2 METAL CUTTING - BI-METAL ...................................................2 METAL SCROLL CUTTING - BI-METAL ...................................2CIRCULAR SAW BLADES .............................................................15DIAMOND SAW BLADES - DRY CUTTING ASPHALT & GREEN CONCRETE BLADE ...............................13 BLOCK BLADE .......................................................................13 BRICK & BLOCK BLADE ........................................................13 CONTINUOUS RIM TILE BLADE ............................................14 CURED CONCRETE BLADE ...................................................13 SEGMENTED TURBO BLADE ................................................14 SMALL DIAMETER LASER WELDED BLADE .........................14 SMALL DIAMETER SEGMENTED BLADE ..............................14 TUCK POINTING BLADE ........................................................13 TURBO BLADE .......................................................................14DIAMOND SAW BLADES - WET CUTTING ASPHALT & GREEN CONCRETE BLADE ...............................12 ASPHALT OVER CONCRETE BLADE ....................................12 CURED CONCRETE BLADE ...................................................12HACKSAW FRAMES CLOSE QUARTER FRAME .....................................................10 HIGH TENSION FRAME ..........................................................10 JUNIOR (MINI) FRAME ...........................................................10HAND HACKSAW BLADES BI-METAL (8% COBALT) ...........................................................9 CARBIDE GRIT EDGED ............................................................9 HIGH SPEED STEEL .................................................................9HANDSAWS COMPASS SAWS .....................................................................8 CROSSCUT SAWS - plastic handle .........................................8 CROSSCUT SAWS - wood handle ...........................................8 DRYWALL SAWS ......................................................................8 DRYWALL/WALLBOARD SAWS ...............................................8 PVC SAWS ................................................................................8 Replacement Blade .................................................................8 TOOL BOX SAW .......................................................................8HOLE SAW ARBOR ADAPTER ......................................................20HOLE SAW ARBORS .....................................................................20HOLE SAW DRIVING PLATES .......................................................21HOLE SAW EXTENSIONS .............................................................21HOLE SAW KITS BI-METAL FRACTIONAL .........................................................16 BI-METAL FRACTIONAL built in arbor ....................................18 BI-METAL METRIC ..................................................................17 BI-METAL METRIC built in arbor ............................................19 CARBIDE GRIT EDGED ..........................................................24 CARBIDE TIPPED ...................................................................22HOLE SAW MANDREL (ARBOR) ADAPTER ..................................21HOLE SAW PILOT DRILLS CARBIDE TIPPED ...................................................................21 HIGH SPEED STEEL ...............................................................21HOLE SAWS BI-METAL FRACTIONAL .........................................................16

HOLE SAWS BI-METAL FRACTIONAL built in arbor ....................................18 BI-METAL METRIC ..................................................................17 BI-METAL METRIC built in arbor ............................................19 CARBIDE GRIT EDGED ..........................................................24 CARBIDE TIPPED ...................................................................22HOLE SAWS - “D” DRIVE .............................................................25 “D” DRIVE ARBOR/PILOT DRILLS .........................................25HOLE SAWS - RECESSED LIGHTING ..........................................25PORTABLE BAND SAW BLADES BI-METAL ................................................................................11 HARD BACK ...........................................................................11POWER HACK SAW BLADES .......................................................11RECIPROCATING SAW BLADES - 1/2" SHANK ABRASIVE MATERIALS CUTTING - CARBIDE GRIT EDGE .....6 METAL CUTTING - COBALT BI-METAL ....................................6 METAL CUTTING - HIGH SPEED STEEL ..................................5 METAL SCROLL CUTTING - BI-METAL ...................................6 METAL SCROLL CUTTING - HIGH SPEED STEEL ..................5 NAIL-EMBEDDED WOOD CUTTING - BI-METAL .....................6 NAIL-EMBEDDED WOOD CUTTING - HIGH ALLOY STEEL ....5 NAIL-FREE WOOD CUTTING - HIGH CARBON .......................5 PLASTER CUTTING - HIGH ALLOY STEEL .............................5 WOOD SCROLL [CONTOUR] CUTTING - BI-METAL ...............6 WOOD SCROLL [CONTOUR] CUTTING - HIGH CUTTING ......5ROD SAWS ......................................................................................7SABER/JIG SAW BLADES - 1/4" SHANK ABRASIVE MATERIALS CUTTING - CARBIDE GRIT EDGE .....2 ALUMINUM &NON-FERROUS METAL CUTTING - HSS ..........1 FIBERGLASS CUTTING - HIGH SPEED STEEL .......................1 METAL CUTTING - BI-METAL ...................................................2 METAL CUTTING - HIGH SPEED STEEL ..................................1 PLASTER CUTTING - HIGH CARBON .....................................1 WOOD CUTTING - BI-METAL ...................................................2 WOOD CUTTING - HIGH CARBON ..........................................1 WOOD SCROLL CUTTING - HIGH CARBON ...........................1SABER/JIG SAW BLADES - BAYONET SHANK METAL CUTTING - BI-METAL ...................................................3 METAL SCROLL CUTTING - BI-METAL ...................................3 WOOD CUTTING - BI-METAL ...................................................3SABER/JIG SAW BLADES - BOSCH STYLE SHANK ABRASIVE MATERIALS CUTTING - CARBIDE GRIT EDGE .....4 FIBERGLASS CUTTING - COBALT BI-METAL .........................4 METAL CUTTING COBALT BI-METAL ......................................4 METAL CUTTING HIGH SPEED STEEL ....................................4 NAIL EMBEDDED WOOD CUTTING - COBALT BI-METAL ......4 NAIL EMBEDDED WOOD CUTTING - HIGH SPEED STEEL ....4 WOOD CUTTING - HIGH CARBON ..........................................4 WOOD SCROLL CUTTING - COBALT BI-METAL .....................4 WOOD SCROLL CUTTING - HIGH CARBON ...........................4SABER/JIG SAW BLADES - MAKITA SHANK ABRASIVE MATERIALS CUTTING - CARBIDE GRIT EDGE .....3 METAL CUTTING - HIGH SPEED STEEL ..................................3 NAIL EMBEDDED WOOD CUTTING - HIGH SPEED STEEL ....3 WOOD CUTTING - HIGH CARBON ..........................................3SCROLL/JIGSAW BLADES .............................................................7

ICS

ICS

ICS

ICS

ICS

ICS

ICS

ICS

ICS

ICS

ICS

SABER/JIG SAW BLADES - 1/4" SHANK

Fits all Saber Saws using universal 1/4" shank.

ICS WIS MILLED TEETH

2-3/4 5/16 14 Medium - Fast Wavy SSB-M-314 $ .90 $ .82 Metals 1/4" - 3/8" Set 2-3/4 5/16 18 Smooth - Medium Wavy SSB-M-318 .90 .82 Metals 1/8" - 1/4" Set 2-3/4 5/16 24 Fine - Slow Wavy SSB-M-324 .90 .82 Metals 1/16" - 3/16" Set 2-3/4 5/16 32 Extra Fine - Slow Wavy SSB-M-332 .90 .82 Set

2-3/4 5/16 6 Coarse - Fast Wavy SSB-W-306 .48 .44 Wood up to 1-1/2" Set 3-1/8 5/16 8 Medium - Medium Alt. SSB-W-308 .48 .44 Wood up to 2" Set 3-1/8 5/16 10 Smooth - Medium Alt. SSB-W-310 .48 .44 Wood up to 2" Set

4 5/16 6 Smooth - Fast Taper SSB-TG-406 1.52 1.34 Wood up to 2-3/8" Ground

4 5/16 10 Fine - Medium Taper SSB-TG-410 1.52 1.34 Wood up to 2-3/8"

6 9/16 6 Rough - Fast Alt. SSB-W-606 1.92 1.72 Wood up to 4" Set

3-5/8 1-3/8 8 Medium - Medium Alt. SSB-WF-308 1.92 1.72 Flush cuts to wall Set

3-1/8 1/4 10 Medium - Medium Alt. SSB-TE-310 1.18 1.06 Cuts wood both directions Set

2-3/4 5/32 12 Smooth - Medium Wavy SSB-S-312 .80 .72 Scroll cuts wood to 1" Set

2-3/4 5/16 14 Fine - Very Fast Wavy SSB-F-314 1.24 1.12 Special Angle cuts 30% faster Set

3-1/8 5/16 8 Medium - Fast Skip SSB-A-308 1.76 1.58 Special teeth eject chips Tooth

3-5/8 5/16 9 Rough - Fast V- SSB-P-309 1.08 .96 V-Tooth prevents clogging Tooth

ILLUSTRATIONAND COLOR

ITEMNO.

CUT - SPEEDAPPLICATION

TYPETEETH

TEETHPERINCH

PRICE EACH

LENGTH WIDTH

RED BLADE

BLACK BLADE

BLUE BLADE

BLUE BLADE

RED BLADE

BLACK BLADE

SILVER GROUND FINISH

BLACK BLADE

BLACK BLADE

BLACK BLADE

POUCH5 PCS.

BOX100 PCS.

METAL CUTTING - HIGH SPEED STEEL

WOOD CUTTING - HIGH CARBON

FIBERGLASS CUTTING - HIGH SPEED STEEL

ALUMINUM & NON-FERROUS METAL CUTTING - HIGH SPEED STEEL

PLASTER CUTTING - HIGH CARBON

WOOD SCROLL CUTTING - HIGH CARBON

ST-1

ICS BI-METAL

ICS - CARBIDE GRIT EDGE

ICS BI-METAL

ICS

ICS

ICS

ICS

ICS



AIR SAW BLADES - 1/2" SHANK


Fits Florida Pneumatic, Snap On, Mag Tools and most popular pneumatic reciprocating saws.


ICS USA

ICS USA

ICS USA

MILLED TEETH

MILLED TEETH

CARBIDE GRIT EDGE

3-5/8 5/16 14 Medium - Fast Wavy SSB-BM-314 $1.94 $1.76 Metals 1/4" - 3/8" Set

2-3/4 5/16 18 Smooth - Medium Wavy SSB-BM-318 1.72 1.56 Metals 1/8" - 1/4" Set 2-3/4 5/16 24 Fine - Slow Wavy SSB-BM-324 1.72 1.56 Metals 1/16" - 3/16" Set

4-1/8 1/4 6 Coarse - Fast Alt. SSB-BW-406 2.12 1.92 Wood up to 2-3/8" Set

4-1/8 1/4 10 Smooth - Medium Alt. SSB-BW-410 2.12 1.92 Wood up to 2-3/8" Set

2-7/8 3/8 30 Grit Coarse SSB-CE-2C $3.36 $3.02 2-7/8 3/8 40 Grit Medium SSB-CE-2M 3.36 3.02 2-7/8 3/8 50 Grit Fine SSB-CE-2F 3.36 3.02 3-5/8 3/8 30 Grit Coarse SSB-CE-3C 3.36 3.02 3-5/8 3/8 40 Grit Medium SSB-CE-3M 3.36 3.02

3-1/2 1/2 18 Smooth - Medium Wavy ASB-BM-318 $2.30 $2.08 Metals 1/8" - 1/4" Set 3-1/2 1/2 24 Fine - Slow Wavy ASB-BM-324 2.30 2.08 Metals 1/16" - 3/16" Set 3-1/2 1/2 32 Extra Fine - Slow Wavy ASB-BM-332 2.30 2.08 Metals 1/32" - 1/8" Set

4 1/2 18 Smooth - Medium Wavy ASB-BM-418 2.40 2.16 Metals 1/8" - 1/4" Set 4 1/2 32 Extra Fine - Slow Wavy ASB-BM-432 2.40 2.16 Metals 1/32" - 1/8" Set 5 1/2 18 Heavy Gauge Metals Wavy ASB-BM-518 2.80 2.56 Set

Plywood, cast iron,stainless steel, fiberglass,ceramic tile, slate, brick,marble, etc. Cuts manymaterials conventional steel blades cannot cut.


ITEMNO.


TEETHPERINCH

PRICE EACH

LENGTH WIDTH

WHITE BLADE

WHITE BLADE


ITEMNO.


GRITLEVEL

GRITSTYLELENGTH WIDTH

BLACK BLADE


ITEMNO.


TEETHPERINCHLENGTH WIDTH

WHITE BLADE

WHITE BLADE

TYPETEETH

PRICE EACH

PRICE EACHTYPE

TEETH

METAL CUTTING - BI-METAL

POUCH5 PCS.

BOX100 PCS.

POUCH5 PCS.

BOX100 PCS.

POUCH5 PCS.

BOX100 PCS.

METAL SCROLL CUTTING - BI-METAL

WOOD CUTTING - BI-METAL

ABRASIVE MATERIALS CUTTING - CARBIDE GRIT EDGE


ST-2

ICS

ICS

ICS

ICS

ICS

ICS

ICS

ICS

ICS

ICS

SABER/JIG SAW BLADES - BAYONET SHANK

SABER/JIG SAW BLADES - MAKITA SHANK

For Makita® Models JG 1600, JV 2000, 4300BV, 4301BV

ICS USA

ICS USA

MILLED TEETH

MILLED TEETH

For Porter Cable® or Rockwell® Machines Models 348, 548, 648

3-1/8 5/16 40 Grit Medium - Slow Medium SSBM-CE-3M 3.36 3.02 Ceramic Tile, Fiberglass, Plastic, Cast Iron Pipe, etc.

3-1/4 3/8 14 Medium - Fast Wavy SSBM-M-314 $1.62 $1.46 Metals 3/16" - 3/8" Set 3-1/4 3/8 24 Fine - Slow Wavy SSBM-M-324 1.62 1.46 Metals 1/16" - 3/16" Set

2 3/8 14 Medium - Fast Wavy SSBP-BM-214 $1.80 $1.62 Metals 1/4" - 3/8" Set

2 3/8 24 Fine - Slow Wavy SSBP-BM-224 1.80 1.62 Metals 1/16" - 3/16" Set

3 3/8 18 Smooth - Medium Wavy SSBP-BM-318 2.10 1.88 Metals 1/8" - 1/4" Set

3-5/8 3/8 18 Smooth - Medium Wavy SSBP-BM-318L 2.20 1.98 Metals 1/8" - 1/4" Set

2 1/4 18 Fine - Slow Wavy SSBP-BMS-218 1.86 1.86 Metals 1/8" - 1/4" Set


ITEMNO.


TEETHPERINCH

PRICE EACH

LENGTH WIDTH

3 3/8 6 Coarse - Fast Alt. SSBP-BW-306 2.10 1.88 Wood up to 2" Set 3 3/8 10 Smooth - Medium Alt. SSBP-BW-310 2.10 1.88 Wood up to 2" Set

3-1/4 3/8 10 Smooth - Medium Raker SSBM-NW-310 1.62 1.46 Wood up to 2" Set

3-1/4 3/8 8 Medium - Medium Alt. SSBM-W-308 1.06 .96 Wood up to 2" Set

3-1/4 3/8 10 Smooth - Fast Taper SSBM-TG-310 2.00 1.80 Wood up to 2" Ground

TYPETEETH

POUCH5 PCS.

BOX100 PCS.

RED BLADE

RED BLADE

BLACK BLADE

BLACK BLADE

WHITE BLADE

WHITE BLADE

WHITE BLADE

NAIL EMBEDDED WOOD CUTTING - HIGH SPEED STEEL




WOOD CUTTING - BI-METAL



GROUND FINISH


ITEMNO.


TEETHPERINCH

PRICE EACH

LENGTH WIDTHTYPE

TEETHPOUCH5 PCS.

BOX100 PCS.

ST-3

ICS

ICS

ICS

ICS

ICS

ICS

ICS

ICS

ICS

ICS

ICS

SABER/JIG SAW BLADES - BOSCH STYLE SHANK

For Bosch® Machines with T-Shank design.

ICS USA MILLED TEETH


ITEMNO.


TEETHPERINCH

PRICE EACH

LENGTH WIDTHTYPE

TEETHPOUCH5 PCS.

BOX100 PCS.

3-5/8 5/16 40 Grit Medium - Slow Medium SSBB-CE-300 3.36 3.02 Ceramic Tile, Fiberglass, Plastic, Cast Iron Pipe, etc.

4 5/16 8 Medium - Medium Alt. SSBB-NW-408 2.18 1.96 Wood up to 2-1/4" Set 5 5/16 14 Smooth - Medium Alt. SSBB-NW-514 2.88 2.58 Wood up to 2-1/4" Set

4 5/16 6 Coarse - Fast Alt. SSBB-W-406 1.86 1.68 Wood up to 2-1/4" Set 4 5/16 10 Smooth - Medium Alt. SSBB-W-410 1.38 1.24 Wood up to 2-1/4" Set 4 5/16 10 Fine - Medium Taper SSBB-TG-410 2.58 2.34 Wood up to 2-1/4" Ground

3 5/16 14 Medium - Fast Wavy SSBB-M-314 2.24 2.00 Metals 1/4" - 3/8" Set

3 5/16 18 Smooth - Medium Wavy SSBB-M-318 2.24 2.00 Metals 1/8" - 1/4" Set

3 5/16 24 Fine - Slow Wavy SSBB-M-324 2.24 2.00 Metals 1/16" - 3/16" Set

5 5/16 21 Fine - Slow Wavy SSBB-M-521 2.88 2.58 Pipe and Channels up to 3" Set

3 5/16 12 Fine - Fast Special SSBB-BMF-312 3.50 3.14 Special tooth and coating

3-5/8 5/16 14 Medium - Fast Wavy SSBB-BM-314 $2.24 $2.02 Metals 1/4" - 3/8" Set 3-5/8 5/16 18 Smooth - Medium Wavy SSBB-BM-318 2.24 2.02 Metals 1/8" - 1/4" Set 3-5/8 5/16 24 Fine - Slow Wavy SSBB-BM-324 2.24 2.02 Metals 1/16" - 3/16" Set

4 5/16 6 Coarse - Fast Alt. SSBB-BW-406 2.58 2.34 Wood up to 2-1/4" Set 4 5/16 8 Medium - Medium Alt. SSBB-BW-408 2.58 2.34 Wood up to 2-1/4" Set 4 5/16 10 Smooth - Medium Alt. SSBB-BW-410 2.58 2.34 Wood up to 2-1/4" Set

4 1/4 10 Smooth - Medium Alt. SSBB-BMS-410 2.58 2.34 Scroll cuts wood up to 2-1/4" Set

4 1/4 6 Coarse - Fast Alt. SSBB-S-406 1.86 1.68 Scroll cuts wood up to 2-1/4" Set

WHITE BLADE

RED BLADE

RED BLADE

BLACK BLADE

BLACK BLADE

SILVER GROUND FINISH

BLACK BLADE

WHITE BLADE

WHITE BLADE

WHITE BLADE




WOOD SCROLL CUTTING - HIGH CARBON

METAL CUTTING - COBALT BI-METAL

NAIL EMBEDDED WOOD CUTTING - HIGH SPEED STEEL

NAIL EMBEDDED WOOD CUTTING - COBALT BI-METAL

WOOD SCROLL CUTTING - COBALT BI-METAL

FIBERGLASS CUTTING - COBALT BI-METAL

ST-4

PLASTER CUTTING - HIGH ALLOY STEEL

ICS

ICS

ICS

ICS

ICS

ICS

ICS

ICS


METAL SCROLL CUTTING - HIGH SPEED STEEL

NAIL-EMBEDDED WOOD CUTTING - HIGH ALLOY STEEL

NAIL-FREE WOOD CUTTING - HIGH CARBON

WOOD SCROLL [CONTOUR] CUTTING - HIGH CUTTING

RECIPROCATING SAW BLADES - 1/2" SHANKMILLED TEETH

Fits any Reciprocating Saw using 1/2" universal shank.

ICS USA

4 5/8 12 Medium - Fast Raker RSB-M-412 $1.56 $1.40 Metals 1/8" and over Set 4 5/8 18 Smooth - Medium Raker RSB-M-418 1.56 1.40 Metals 1/8" and under Set 4 5/8 24 Fine - Slow Raker RSB-M-424 1.56 1.40 Metals 3/64" and under Set 6 5/8 10 Medium - Fast Raker RSB-M-610 1.90 1.52 Metals 1/4" and over Set 6 5/8 14 Medium - Fast Raker RSB-M-614 1.90 1.52 Metals 1/8" and over Set 6 5/8 18 Smooth - Medium Raker RSB-M-618 1.90 1.52 Metals 1/8" and under Set 8 5/8 10 Medium - Fast Raker RSB-M-810 2.64 2.36 Metals - Deep cuts Set

4 5/16 18 Smooth - Medium Wavy RSB-MS-418 1.62 1.46 Metals 3/64" and over Set

6 5/8 6 Coarse - Fast Alt. RSB-NW-606 1.30 1.18 Roughing work Set 6 5/8 10 Medium - Medium Alt. RSB-NW-610 1.30 1.18 Standard work Set 6 5/8 18 Smooth - Medium Wavy RSB-NW-618 1.30 1.18 Finish work Set 12 5/8 3 Coarse - Very Fast Alt. RSB-NW-123 2.36 2.14 Heavy work Set 12 5/8 6 Coarse - Fast Alt. RSB-NW-126 2.36 2.14 Roughing work Set 12 5/8 10 Medium - Medium Alt. RSB-NW-1210 2.36 2.14 Standard work Set

6 5/8 3 Coarse - Very Fast Alt. RSB-W-603 1.30 1.08 Heavy work Set 9 5/8 3 Coarse - Very Fast Alt. RSB-W-903 2.08 1.86 Heavy work Set

6 5/8 6 Coarse - Fast Alt. RSB-W-606 1.68 1.54 Roughing work Set 9 3/4 6 Coarse - Fast Alt. RSB-W-906 2.52 2.28 Roughing work Set 12 3/4 6 Coarse - Fast Alt. RSB-W-126 3.36 3.04 Roughing work Set

6 1/2 6 Coarse - Fast Alt. RSB-S-606 1.60 1.44 Cutting irregular curves Set

6 3/4 6 Rough - Fast V- RSB-P-606 1.72 1.54 V-Tooth prevents clogging Tooth

RED BLADE

BLACK BLADE

BLACK BLADE

BLACK BLADE

RED BLADE

BLACK BLADE

WHITE BLADE


ITEMNO.


TEETHPERINCH

PRICE EACH

LENGTH WIDTHTYPE

TEETHPOUCH5 PCS.

BOX100 PCS.

ST-5

ICS

ICS

ICS

ICS

ICS

ICS

ICS

ICS

ICS

NAIL-EMBEDDED WOOD CUTTING - BI-METAL



WOOD SCROLL [CONTOUR] CUTTING - BI-METAL


METAL CUTTING - COBALT BI-METAL

RECIPROCATING SAW BLADES - 1/2" SHANKMILLED TEETH

Fits any Reciprocating Saw using 1/2" universal shank.

ICS USA

6 3/4 10 Medium - Fast Raker RSB-BMC-610 $2.66 $2.38 Metals 1/4" and over Set 6 3/4 14 Medium - Fast Raker RSB-BMC-614 2.66 2.38 Metals 1/8" and over Set

6 3/4 18 Smooth - Medium Raker RSB-BMC-618 2.66 2.38 Metals 1/8" and under Set

6 3/4 24 Fine - Slow Raker RSB-BMC-624 2.66 2.38 Metals 3/64" and under Set 8 3/4 10 Medium - Fast Raker RSB-BMC-810 4.26 3.84 Metals - Deep Cuts Set

4 5/8 10 Medium - Fast Raker RSB-BM-410 1.76 1.58 Metals 1/4" and over Set 4 5/8 14 Medium - Fast Raker RSB-BM-414 1.76 1.58 Metals 1/8" and over Set 4 5/8 18 Smooth - Medium Raker RSB-BM-418 1.76 1.58 Metals 1/8" and under Set 4 5/8 24 Fine - Slow Wavy RSB-BM-424 1.76 1.58 Metals 3/64" and under Set 6 5/8 10 Medium - Fast Raker RSB-BM-610 2.46 2.20 Metals 1/4" and over Set 6 5/8 14 Medium - Fast Raker RSB-BM-614 2.46 2.20 Metals 1/8" and over Set

6 5/8 18 Smooth - Medium Raker RSB-BM-618 2.46 2.20 Metals 1/8" and under Set

6 5/8 24 Fine - Slow Wavy RSB-BM-624 2.46 2.20 Metals 3/64" and under Set 8 5/8 10 Medium - Fast Raker RSB-BM-810 3.82 3.44 Metals - Deep Cuts Set

6 3/4 5-7 Coarse - Fast Variable RSB-BM-607 3.70 3.34 Metals 1/4" and over Tooth 9 3/4 10-14 Medium - Fast Variable RSB-BM-914 5.60 5.04 Pipe & Channels up to 6" Tooth

3-1/2 5/16 18 Smooth - Medium Raker RSB-BMS-318 1.76 1.58 Cutting irregular curves Set

6 1/2 6 Coarse - Fast Alt. RSB-BS-606 3.36 3.04 Cutting irregular curves Set

6 3/4 6 Coarse - Fast Alt. RSB-BW-606 3.70 3.34 Roughing work Set 9 3/4 6 Coarse - Fast Alt. RSB-BW-906 4.26 3.84 Roughing work Set 12 3/4 6 Coarse - Fast Alt. RSB-BW-126 6.06 5.46 Roughing work Set 6 5/8 10 Medium - Medium Alt. RSB-BW-610 2.36 2.14 Standard work Set

4 3/4 30 Grit Coarse - Medium Coarse RSB-CE-04 4.06 3.66

6 3/4 30 Grit Ceramic Tile, Fiberglass, Coarse RSB-CE-06 4.58 4.08

8 3/4 30 Grit Plastic, Cast Iron Pipe, Coarse RSB-CE-08 5.60 5.04

9 3/4 30 Grit Stainless Steel, etc. Coarse RSB-CE-09 6.68 6.02

WHITE BLADE

WHITE BLADE

WHITE BLADE

WHITE BLADE

WHITE BLADE

WHITE BLADE

BLACK BLADE

WHITE BLADE


ITEMNO.


TEETHPERINCH

PRICE EACH

LENGTH WIDTHTYPE

TEETHPOUCH5 PCS.

BOX100 PCS.

ST-6

SCROLL/JIGSAW BLADESMILLED TEETH

Scroll/Jigsaw Blades are designed for precise, internal and external cutting of wood, plastic, and non ferrousmetals. Plain end styles fit virtually any scroll saw, as well as hand held fret and jewelers saw frames.

* With 6 Reverse Teeth

ICS USA SPECIAL PURPOSE

HIGH CARBON

ROD SAW

Carbide grit edged sawing wire cuts tile, glass, marble, hardened tool steel, fiber board and many other hard tocut materials. Cuts in both directions. Can cut curves and change cutting direction without altering the saw angle.Self sharpening. Fits all standard hacksaw frames.

ICS UK SPECIAL PURPOSE

CARBIDE GRIT EDGED

5" PLAIN END-REG. TEETH

ITEM NO.

PRICE EACH

LENGTH

6" RS-CE-06 $3.08 $2.76 10" RS-CE-10 3.80 3.42 12" RS-CE-12 4.52 4.14

TEETH PER INCH WIDTH THICKNESS ITEM NO.PRICE EACH

9.5 .062 x .024 SJB-509 $0.46 11 .053 x .018 SJB-511 0.40 12.5 .038 x .016 SJB-512* 0.40

1 PC. POUCH 10 PC. POUCH

5 PACK

ST-7

HANDSAWSWOOD CUTTING

ICS Handsaws are available in a variety of styles for all hand cutting needs. Each handsaw is designed for a specificcutting application. The descriptions below will assist the user in selecting the handsaw needed for their particularapplication.

ICS USA ALL PURPOSE

LENGTH CUTITEMNO.DESCRIPTION

POINTSPER INCH PRICE

CROSSCUT SAWS

Wood Handle

CROSSCUT SAW

Plastic Handle

TOOL BOX SAW

Plastic Handle

COMPASS SAW

Plastic Handle

DRYWALL/WALLBOARD SAW

Wood Handle

DRYWALL SAW

Plastic Handle

PVC SAWS

Aluminum Handle

Replacement Blade

26" 8 Crosscut - Medium H-CCH-1 $30.60 26" 10 Crosscut - Fine H-CCH-2 30.06

For high quality wood cutting. Chrome-nickel alloy steel blade teeth are bevel-filed and accurately set.

26" 8 Crosscut - Medium H-CC-1 11.52

For general purpose wood cutting. Polished steel blade. Teeth are filed andaccurately set.

15" 9 Push-Pull Crosscut H-TB-1 18.20

For general purpose wood cutting. New 9-point triangular tooth design cuts inboth directions and twice as fast as regular handsaws. Handle designed with45° and 90° angles for layout and marking. Polished steel blade. Teeth arebevel-filed and accurately set.

12" 8 Crosscut - Medium H-C-1 5.30

For cutting out curved shapes and freehand cutting in wood, plasterboard,plywood and plastic. Polished steel blade teeth are filed and accurately set.

6" 8 Ripsaw - Medium H-DW-1 5.30

For making cutouts for electrical outlets in drywall, wallboard, plasterboardand similar materials. Blade has self-starting point for plunge cutting. Polishedsteel blade. Teeth are filed and accurately set.

15" 5 Ripsaw - Coarse H-D-1 15.12

For cutting quickly through drywall, wallboard, plasterboard, and similarmaterials. Polished steel blade. Teeth are filed and accurately set.

12" 10 Push-Pull Crosscut H-PVC-1 12.46 18" 10 Push-Pull Crosscut H-PVC-2 15.80

For cutting PVC/ABS plastic pipe, wallboard, nail embedded wood, fiberglasspanels, brass and copper tubing, and general purpose woodcutting.Tempered steel blade. Teeth are milled and accurately set.

PVC REPLACEMENT BLADES

12" PVC Blade PVCB12 8.3018" PVC Blade PVCB12 11.64

HEAVY DUTY

GENERAL PURPOSE

HEAVY DUTY

SPECIAL PURPOSE

SPECIAL PURPOSE

SPECIAL PURPOSE

SPECIAL PURPOSE

ST-8

ICS-HSS

HAND HACKSAW BLADESMILLED TEETH

Flexible Molybdenum High Speed Steel Blades are double heat treated to provide a hard cutting edge on the teethand a flexible, shatter resistant back. Used where accuracy and high cutting rates are required. Recommended whenwork cannot be firmly secured. Ideal for specialized sawing of tool steel, alloy steel and other tough materials.

ICS USA HEAVY DUTY

HIGH SPEED STEEL

HAND HACKSAW BLADESMILLED TEETH

Bi-Metal Blades have a Molybdenum High Speed Steel cutting edge electronically welded to a tough alloy spring steelback. The full tooth hardness, combined with a flexible back, provides the highest possible cutting efficiency. Shatterproofblades may last twice as long as other HSS blades. Ideal for cutting stainless, pipe, conduit - almost any material.

ICS USA HEAVY DUTY

BI-METAL (8% COBALT)

HAND HACKSAW BLADESCARBIDE GRIT EDGE ICS USA SPECIAL PURPOSE

TOOTH SELECTION

CARBIDE GRIT EDGED

ICS Hand Hacksaw Blades can be used to cut a variety of materials and shapes. The proper blade will provide maximum blade life and high cuttingefficiency. Selection depends on several considerations.

TEETH PER INCH 14 TOOTH BLADE - COARSE - 1" or greater cross section cutting 18 TOOTH BLADE - MEDIUM - 1/4" to 1" cross section cutting 24 TOOTH BLADE - FINE - Sheet metal cutting and tubing 32 TOOTH BLADE - VERY FINE - Up to 1/16" Thickness cutting

TOOTH SELECTION: Selecting a blade with the correct number of teeth is dependent on the thickness and type of material to be cut. The teeth mustnever straddle the material and at least 3 teeth must always be in contact. For thin sections, the highest number of teeth should be selected.

BLADES ARE PAINTED RED

BLADES ARE PAINTED WHITE

Carbide Grit Edged Hacksaw Blades are extra-wide to help maintain a straight cut and to cut very difficult work: Thin gaugestainless steel, perforated metal, wire rope. Cuts in both directions. Self sharpening. Fits all standard hacksaw frames.

BLADES ARE PAINTED BLACK

12 1/2 14 HSB-HS-12X14T $2.00 $1.80 $1.62 12 1/2 18 HSB-HS-12X18T 2.00 1.80 1.62 12 1/2 24 HSB-HS-12X24T 2.00 1.80 1.62 12 1/2 32 HSB-HS-12X32T 2.00 1.80 1.62

10 1/2 HSB-CE-10 $3.92 $3.54 12 1/2 HSB-CE-12 4.48 4.04 12 3/4 HSB-CE-12A 4.48 4.04

LENGTH WIDTHTEETH

PER INCHPRICE EACH

ITEM NO. 10 PCS. POUCH2 PCS. POUCH 100 PCS. BOX

12 1/2 14 HSB-BM-12X14T $2.00 $1.80 $1.62 12 1/2 18 HSB-BM-12X18T 2.00 1.80 1.62 12 1/2 24 HSB-BM-12X24T 2.00 1.80 1.62 12 1/2 32 HSB-BM-12X32T 2.00 1.80 1.62

LENGTH WIDTHTEETH

PER INCHPRICE EACH

ITEM NO. 10 PCS. POUCH2 PCS. POUCH 100 PCS. BOX

LENGTH WIDTHPRICE EACH

ITEM NO. 1 PC. POUCH 10 PCS. POUCH

ST-9

HACKSAW FRAMESMETAL CUTTING

ICS Hack Saws are available in a variety of styles for all hand metal cutting needs. Each Hack Saw is designed for aspecific cutting application. The description below will assist the user in selecting the Hack Saw needed for theirparticular application.

ICS USA ALL PURPOSE

NOTE All saws come with a metal cutting hack saw blade.

HSF-HT-1

HSF-HT-2

HSF-JM-1

HSF-CQ-2

$21.78

17.26

3.52

3.14

• Die cast aluminum and steel frame• Uses 12" bi-metal blade• Blade adjusts to cut at either 45° or 90°• Blade storage compartment in frame• Lever tensions blade to 28,000 psi• Use frame as Jab or key hole saw• Cutting depth is 3-3/4"

• Die cast aluminum and steel frame• Uses 12" bi-metal blade• Blade adjusts to cut at either 45° or 90°• Blade storage compartment in frame• Lever tensions blade to 28,000 psi• Use frame as Jab or key hole saw• Cutting depth is 4"

• Heavy duty ABS frame• Uses 6" pin end blade• Blade cuts in one direction• Tapered nose design for tight spots• Cutting depth is 2"

• Unbreakable nylon frame• Uses any size blade, even broken ones• Blade position can be adjusted or reversed• Cuts flush to surface

FEATURES ITEM NO.DESCRIPTION PRICE

HIGH TENSION FRAME

HIGH TENSION FRAME

JUNIOR (MINI) FRAME

CLOSE QUARTER FRAME

HEAVY DUTY

HEAVY DUTY

HEAVY DUTY

HEAVY DUTY

ST-10

POWER HACK SAW BLADESMILLED TEETH

All Hard Molybdenum High Speed Steel Blades are fully heat treated throughout for rigidity and exceptional blade life. Theall hard feature assures straight cuts and gives excellent results on tough materials.

ICS USA HEAVY DUTY

HIGH SPEED STEEL

PACKAGING: 10 Pcs. / BoxCALL FOR PRICE

PORTABLE BAND SAW BLADESMILLED TEETH

Hard Back Carbon ensures fast and accurate cuts.Excellent for cutting mild steel.

ICS USA GENERAL PURPOSE / HEAVY DUTY

Bi-Metal for cutting stainless steel and other tough jobs.Full tooth hardness and flexible back for long blade life.

HARD BACK BI-METAL

NOTE Carbide Grit Edge Portable Band Saw Blades are available upon request.

12 x 1 x .050 10 PHSB12X100X10 12 x 1 x .050 14 PHSB12X100X14 14 x 1 x .050 10 PHSB14X100X10 14 x 1 x .050 14 PHSB14X100X14 14 x 1-1/4 x .062 6 PHSB14X116X.6 14 x 1-1/4 x .062 10 PHSB14X116X10 14 x 1-1/2 x .079 4 PHSB14X132X04 14 x 1-1/2 x .079 6 PHSB14X132X06 17 x 1 x .050 10 PHSB17X100X10 17 x 1 x .050 14 PHSB17X100X14 17 x 1-1/4 x .062 4 PHSB17X100X04 17 x 1-1/4 x .062 6 PHSB17X100X06

44-7/8 1/2 10 RAKER PB-HB44-10TR 44-7/8 1/2 14 RAKER PB-HB44-14TR 44-7/8 1/2 18 RAKER PB-HB44-18TR 44-7/8 1/2 24 RAKER PB-HB44-24TR

DIMENSIONS: INCHESLENGTH x WIDTH x THICK

TEETHPER INCH

ITEMNO.

DIMENSIONS: INCHESLENGTH x WIDTH x THICK

TEETHPER INCH

ITEMNO.

LENGTH WIDTHTEETH

PER INCHTOOTH

SETTOOTH

SET

44-7/8 1/2 10 RAKER PB-BM44-10TR 44-7/8 1/2 14 RAKER PB-BM44-14TR 44-7/8 1/2 18 RAKER PB-BM44-18TR 44-7/8 1/2 24 RAKER PB-BM44-24TR 44-7/8 1/2 10 COMBO PB-BM44-10TV

LENGTH WIDTHTEETH

PER INCHTOOTH

SETTOOTH

SET

17 x 1-1/4 x .062 10 PHSB17X116X10 18 x 1-1/4 x .062 6 PHSB18X116X06 18 x 1-1/4 x .062 10 PHSB18X116X10 18 x 1-1/2 x .079 4 PHSB18X132X04 18 x 1-1/2 x .079 6 PHSB18X132X06 18 x 1-3/4 x .088 4 PHSB18X148X04 18 x 1-3/4 x .088 6 PHSB18X148X06 21 x 1-3/4 x .088 4 PHSB21X148X04 21 x 1-3/4 x .088 6 PHSB21X148X06 24 x 1-3/4 x .088 6 PHSB24X148X06 24 x 1-3/4 x .088 4 PHSB24X148X04 24 x 2 x .100 4 PHSB24X200X04

CALL FOR PRICEPACKAGING: 3 Pcs. / Box – 10 Pcs. / Box – 100 Pcs. / Box

ST-11

ICS USA

DESCRIPTIONDIA. x THICKNESS

x ARBORITEMNO.

SEG.HEIGHT PRICE


x ARBORITEMNO.

SEG.HEIGHT PRICE


x ARBORITEMNO.

SEG.HEIGHT PRICE

Roc-Edge™ Premium Grade Asphalt Over Concrete Diamond Saw Blades are laser welded and designed for wetcutting asphalt over cured concrete, abrasive asphalt, and very hard aggregate asphalt. Deep drop segments forundercut protection is standard for cutting abrasive asphalt. Blades cut 30% faster and last up to 40% longer. Lengthof cuts: 10,000 to 15,000 inch feet. They are used on hand held high speed power saws and low horse power (20 hp)walk behind saws. Blades meet or exceed DOT and professional concrete/asphalt cutter specifications. HARD BOND.

Roc-Edge™ Premium Grade Asphalt and Green Concrete Diamond Saw Blades are laser welded and designed forwet cutting asphalt, green concrete, and hard aggregate asphalt. All sizes have a 42% diamond concentration and a10mm (.395) segment height. Deep drop segments for undercut protection is standard for cutting abrasive asphalt.Blades cut 30% faster and last up to 40% longer. Length of cuts: 20,000 to 60,000 inch feet. They are used on handheld high speed power saws and low horse power (20 hp) walk behind saws. Blades meet or exceed DOT andprofessional concrete/asphalt cutter specifications. HARD BOND.

Roc-Edge™ Premium Grade Cured Concrete Diamond Saw Blades are designed for wet cutting cured and reinforcedconcrete, brick, concrete block, bluestone, limestone, roof tile, and all other aggregates. They are laser welded witha special matrix bond on both sides of the segments for strength and long life. Length of cuts: 6,000 to 18,000 inchfeet. They are used on hand held high speed power saws and low horse power (20 hp) walk behind saws. Bladesmeet or exceed DOT and professional concrete/asphalt cutter specifications. SOFT BOND.

ASPHALT OVER CONCRETE

PREMIUM STEEL

CURED CONCRETE

PREMIUM STEEL

ASPHALT AND GREEN CONCRETE

PREMIUM STEEL

12 x .142 x 1 .395 DSB-WP-AC-12B $ 269.10 12 x .155 x 1 .395 DSB-WP-AC-12C 269.10 12 x .250 x 1 .395 DSB-WP-AC-12E 490.90 12 x .375 x 1 .395 DSB-WP-AC-12F 683.64 14 x .142 x 1 .395 DSB-WP-AC-14B 327.28 14 x .250 x 1 .395 DSB-WP-AC-14E 538.18 14 x .375 x 1 .395 DSB-WP-AC-14F 734.54 16 x .125 x 1 .433 DSB-WP-AC-16A 418.18 18 x .142 x 1 .433 DSB-WP-AC-18A 629.10 20 x .142 x 1 .433 DSB-WP-AC-20A 716.36 24 x .155 x 1 .433 DSB-WP-AC-24A 985.46 26 x .155 x 1 .433 DSB-WP-AC-26A 1134.54 30 x .187 x 1 .433 DSB-WP-AC-30A 1327.28 36 x .187 x 1 .433 DSB-WP-AC-36A 1781.82

12 x .125 x 1-20mm .395 DSB-WP-AGC-12 $ 203.64 14 x .125 x 1-20mm .395 DSB-WP-AGC-14 225.46 12 x .125 x 1-20mm .395 DSB-WS-AGC-12 203.64 14 x .125 x 1-20mm .395 DSB-WS-AGC-14 225.46

ASPHALT OVER CONCRETE DIAMOND SAW BLADES

CURED CONCRETE DIAMOND SAW BLADESDIAMOND SEGMENTSSPECIAL PURPOSE

ASPHALT & GREEN CONCRETE DIAMOND SAW BLADES

12 x .155 x 1 .395 DSB-WP-CC-12A $ 243.64 12 x .250 x 1 .395 DSB-WP-CC-12E 443.64 12 x .375 x 1 .395 DSB-WP-CC-12F 618.18 14 x .155 x 1 .395 DSB-WP-CC-14C 360.00 14 x .250 x 1 .395 DSB-WP-CC-14E 610.90 14 x .375 x 1 .395 DSB-WP-CC-14F 825.46 16 x .155 x 1 .395 DSB-WP-CC-16A 374.54 18 x .142 x 1 .433 DSB-WP-CC-18A 563.64 20 x .142 x 1 .433 DSB-WP-CC-20A 643.64 24 x .155 x 1 .433 DSB-WP-CC-24A 861.82 26 x .155 x 1 .433 DSB-WP-CC-26A 978.18 30 x .187 x 1 .433 DSB-WP-CC-30A 1254.54 36 x .187 x 1 .433 DSB-WP-CC-36A 1683.64

ST-12

DRY CUTTING DIAMOND SAW BLADESDIAMOND SEGMENTS ICS USA SPECIAL PURPOSE

12 x .110 x 1-20mm .264 DSB-DP-CC-12A $282.6812 x .110 x 1-20mm .315 DSB-DP-CC-12B 315.5614 x .110 x 1-20mm .264 DSB-DP-CC-14A 319.6614 x .125 x 1-20mm .315 DSB-DP-CC-14B 351.4212 x .110 x 1-20mm .315 DSB-DS-CC-12A 322.5012 x .125 x 1-20mm .378 DSB-DS-CC-12B 483.2014 x .110 x 1-20mm .315 DSB-DS-CC-14A 358.4014 x .125 x 1-20mm .378 DSB-DS-CC-14B 518.78

12 x .125 x 1-20mm .315 DSB-DP-AGC-12 371.2014 x .125 x 1-20mm .315 DSB-DP-AGC-14 441.2412 x .125 x 1-20mm .378 DSB-DS-AGC-12 460.4614 x .125 x 1-20mm .378 DSB-DS-AGC-14 537.26

12 x .110 x 1-20mm .315 DSB-DP-BB-12 311.4814 x .110 x 1-20mm .315 DSB-DP-BB-14 357.0012 x .110 x 1-20mm .378 DSB-DS-BB-12 390.4214 x .110 x 1-20mm .378 DSB-DS-BB-14 442.32

12 x .125 x 1-20mm .315 DSB-DP-BLK-12 339.2214 x .125 x 1-20mm .315 DSB-DP-BLK-14 385.4220 x .125 x 1-20mm .315 DSB-DP-BLK-20 686.2412 x .125 x 1-20mm .378 DSB-DS-BLK-12 418.8414 x .125 x 1-20mm .378 DSB-DS-BLK-14 470.7620 x .142 x 1 .378 DSB-DS-BLK-20 814.22

4 x .250 x 7/8-5/8 .275 DSB-DP-TP-04 129.44 7 x .250 x 7/8-5/8 .275 DSB-DP-TP-07 270.94

4 x .250 x 7/8-5/8 .354 DSB-DS-TP-04 151.12 5 x .250 x 7/8-5/8 .354 DSB-DS-TP-05 200.20 7 x .250 x 7/8-5/8 .354 DSB-DS-TP-07 283.18


x ARBOR PRICESEG.

HEIGHT GRADE ITEM NO.

CURED CONCRETE BLADE

ASPHALT & GREENCONCRETE BLADE

BRICK & BLOCK BLADE

BLOCK BLADE

TUCK POINTING BLADE

PREMIUM

SUPERPREMIUM

PREMIUM

SUPERPREMIUM

Premium

SuperPremium

Premium

SuperPremium

Premium

SuperPremium

Recommended for cutting cured concrete, brick, and non-abrasive materials.General purpose, soft to medium aggregate.

Recommended for cutting asphalt and soft green concrete. General purpose,medium aggregate asphalt.

Recommended for cutting regular brick and concrete light weight block.

Recommended for cutting concrete light weight block, soft brick, and limestone.

Recommended for routing old mortar between brick and block joints. Can beused on circular saws or angle grinders.

ST-13

DRY CUTTING DIAMOND SAW BLADESDIAMOND SEGMENTS ICS USA SPECIAL PURPOSE

12 x .125 x 1-20mm .315 DSB-DP-ST-12 $383.3014 x .125 x 1-20mm .315 DSB-DP-ST-14 460.80

12 x .125 x 1-20mm .354 DSB-DS-ST-12 413.8814 x .125 x 1-20mm .354 DSB-DS-ST-14 486.04

4 x .090 x 7/8 - 5/8 .295 DSB-DP-T-04 41.244.5 x .090 x 7/8-5/8 .295 DSB-DP-T-045 48.02 5 x .090 x 7/8-5/8 .295 DSB-DP-T-05 55.12 7 x .100 x ◆-5/8 .295 DSB-DP-T-07 83.92 8 x .100 x ◆-5/8 .295 DSB-DP-T-08 99.22 9 x .105 x ◆-5/8 .295 DSB-DP-T-09 125.1610 x .110 x ◆-5/8 .295 DSB-DP-T-10 179.2012 x .118 x 1-20mm .295 DSB-DP-T-12 277.3414 x .125 x 1-20mm .295 DSB-DP-T-14 317.52

4 x .080 x 7/8-5/8 .275 DSB-DP-SDS-04 46.584.5 x .080 x 7/8-5/8 .275 DSB-DP-SDS-045 52.98 5 x .088 x 7/8-5/8 .275 DSB-DP-SDS-05 61.52 7 x .088 x ◆-5/8 .275 DSB-DP-SDS-07 91.02 8 x .095 x ◆-5/8 .275 DSB-DP-SDS-08 117.70 9 x .100 x ◆-5/8 .275 DSB-DP-SDS-09 152.20

4 x .060 x 7/8-5/8 .236 DSB-DP-CRT-04 25.984.5 x .060 x 7/8-5/8 .236 DSB-DP-CRT-045 29.86 6 x .060 x 5/8 .236 DSB-DP-CRT-06 38.40 7 x .060 x 5/8 .236 DSB-DP-CRT-07 49.42 8 x .060 x 5/8 .236 DSB-DP-CRT-08A 50.14 8 x .087 x 5/8 .374 DSB-DP-CRT-08B 106.3210 x .060 x 5/8 .236 DSB-DP-CRT-10A 67.2010 x .087 x 5/8 .374 DSB-DP-CRT-10B 129.8012 x .087 x 1 .275 DSB-DP-CRT-12 120.5414 x .087 x 1 .275 DSB-DP-CRT-14 157.52

4 x .090 x 7/8-5/8 .315 DSB-DP-SDL-04 57.964.5 x .090 x 7/8-5/8 .315 DSB-DP-SDL-045 66.50 5 x .090 x 7/8-5/8 .315 DSB-DP-SDL-05 83.20 7 x .090 x ◆-5/8 .315 DSB-DP-SDL-07 113.78 8 x .100 x ◆-5/8 .315 DSB-DP-SDL-08 142.58 9 x .100 x ◆-5/8 .315 DSB-DP-SDL-09 177.4410 x .100 x ◆-5/8 .315 DSB-DP-SDL-10 212.64


x ARBOR PRICESEG.

HEIGHT GRADE ITEM NO.

SEGMENTED TURBO BLADE

TURBO BLADE

SMALL DIAMETERSEGMENTED BLADE

CONTINUOUS RIMTILE BLADE

SMALL DIAMETERLASER WELDED BLADE

Recommended for cutting hard aggregates and hard masonry materials.

Recommended for cutting concrete, brick, and paving stones.

Recommended for cutting concrete, brick, stone, and hard materials.

Recommended for cutting ceramic tile, slate, glazed tile, and marble.

Recommended for cutting concrete, brick, and other hard materials.

PREMIUM

SUPERPREMIUM

PREMIUM

PREMIUM

PREMIUM

PREMIUM

ST-14

CIRCULAR SAW BLADESCARBIDE TIPPED ICS USA HEAVY DUTY

ICS Carbide Tipped Circular Saw Blades are designed for heavy duty construction work. They are manufactured withgenuine Tungsten Carbide Tips and will last up to 60 times longer than steel blades. Blades are precision balancedand have sharp cutting edges for fast, smooth cuts.

ABRASIVE CUT-OFF WHEELSRESIN BONDED ICS USA HEAVY DUTY

CARBIDE TIPPED

Crosscuts and rips in solid wood, plywood, particle board, chipboard and otherheavy duty sawing. This is a workhorse blade for the construction trade.

DESCRIPTIONNO. OF TEETH

PRICE EACHARBORDIAMETER ITEM NO.

COMBINATION RIP

STANDARD KERF

6-1/2 12 5/8” UNIV CTCB-SK-06512 $11.84 - $10.98 6-1/2 20 5/8” UNIV CTCB-SK-06512 10.38 - 9.70 7-1/4 16 5/8” UNIV CTCB-SK-0716 8.82 - 8.14 7-1/4 20 5/8” UNIV CTCB-SK-0720 9.76 - 9.08 7-1/4 24 5/8” UNIV CTCB-SK-0724 9.26 - 8.58 7-1/4 40 5/8” UNIV CTCB-SK-0740 15.12 - 14.46 8-1/4 24 5/8” CTCB-SK-0824 18.48 17.82 - 8-1/4 40 5/8” CTCB-SK-0840 20.58 19.90 - 10 28 5/8” CTCB-SK-1028 21.04 20.38 - 10 40 5/8” CTCB-SK-1040 21.34 20.66 - 10 60 5/8” CTCB-SK-1060 25.44 24.76 - 12 60 1” CTCB-SK-1260 47.16 - -

DESCRIPTIONPRICE EACHDIA. x THICKNESS

x ARBOR

METAL CUTTING 6-1/2 x 3/32 x ◆-5/8 8600 ACW-M-632 $4.22 7 x 3/32 x ◆-5/8 8600 ACW-M-700 4.14 8 x 3/32 x ◆-5/8 7500 ACW-M-800 4.38

6-1/2 x 1/8 x ◆-5/8 8600 ACW-MAS-632 3.26 7 x 1/8 x ◆-5/8 8600 ACW-MAS-700 3.70 8 x 1/8 x ◆-5/8 7500 ACW-MAS-800 4.58

MASONRY CUTTING

MAXR.P.M.

ITEMNO.

1 PC. 10 PC. 25 PC.

This wheel is designed for use with electric circular saws to cut most ferrousmetals, e.g., structural steel, sheet metal, etc.

10 PC.

This wheel is designed for use with electric circular saws to cut most masonrymaterials, e.g., concrete, masonry, brick, block, stone, aluminum, non-ferrousmetals.

ST-15

HOLE SAWSVARIABLE PITCH

Bi-Metal Hole Saws have a high speed steel cutting edge, electron-beam welded to a tough alloy steel back. They cutclean and accurate holes 1-1/2" deep in virtually any machinable material - steel, cast iron, stainless steel, non-ferrousmetals, wood, or plastics. Arbor is sold separately. Extra Large Hole Saws are any hole saw larger than 6 inches.

ICS USA HEAVY DUTY

HOLE SAW KITSPLASTIC CASES

(M3) BI-METAL

SEPARATEARBOR STYLE

RED FINISH

(M3) BI-METAL

MECHANIC’S HOLE SAW KIT - 1 ea. 7/8, 1, 1-1/8, 1-1/4, HSK-BM-06M $ 77.881-1/2 Hole Saws, HSM-6 Arbor.

DESCRIPTION ITEM NO. PRICE

MAINTENANCE HOLE SAW KIT - 1 ea. 3/4, 7/8, 1-1/8, 1-3/8, HSK-BM-13M 206.521-1/2, 1-3/4, 2, 2-1/4, 2-1/2 Hole Saws, HSM-3, HSM-4, HSM-6 Arbors and 12" extension.PLUMBER’S HOLE SAW KIT- 1 ea. 3/4, 7/8, 1-1/8, 1-1/2, HSK-BM-09P 139.281-3/4, 2-1/4 Hole Saws, HSM-3 and HSM-4 Arbors, and HSPD-3S Pilot Drill.

ELECTRICIAN’S HOLE SAW KIT - 1 ea. 7/8, 1-1/8, 1-3/8, HSK-BM-09E 151.921-3/4, 2, 2-1/2 Hole Saws, HSM-3 and HSM-4 Arbors, and HSPD-3S Pilot Drill.

SIZE

PIPETAPSIZE

PIPEENTRANCE

SIZE

USEARBOR

NO.ITEMNO. PRICE SIZE

PIPETAPSIZE

PIPEENTRANCE

SIZE

USEARBOR

NO.ITEMNO. PRICE

9/16 3/8 1/4 HS-BM036 $ 6.605/8 - - HS-BM040 6.2011/16 - - HS-BM044 6.203/4 1/2 3/8 HS-BM048 6.2013/16 - - HS-BM052 6.207/8 3/4 1/2 HS-BM056 6.3615/16 - - HS-BM060 6.361 - - HS-BM100 6.361-1/16 - - HS-BM104 6.481-1/8 1 3/4 HS-BM108 6.481-3/16 - - HS-BM112 6.481-1/4 - - HS-BM116 6.601-5/16 - - HS-BM120 6.601-3/8 - 1 HS-BM124 7.021-7/16 - - HS-BM128 7.021-1/2 1-1/4 - HS-BM132 7.321-9/16 - - HS-BM136 7.321-5/8 - - HS-BM140 7.321-11/16 - - HS-BM144 7.641-3/4 1-1/2 1-1/4 HS-BM148 9.001-13/16 - - HS-BM152 9.001-7/8 - - HS-BM156 9.002 - 1-1/2 HS-BM200 9.002-1/16 - - HS-BM204 11.182-1/8 - - HS-BM208 11.182-1/4 2 - HS-BM216 11.182-5/16 - - HS-BM220 11.182-3/8 - - HS-BM224 11.182-1/2 - 2 HS-BM232 12.00

2-9/16 - - HS-BM236 $12.002-5/8 2-1/2 - HS-BM240 12.002-3/4 - - HS-BM248 12.002-7/8 - - HS-BM256 12.003 - 2-1/2 HS-BM300 12.363-1/8 - - HS-BM308 12.363-1/4 3 - HS-BM316 13.643-3/8 - - HS-BM324 13.643-1/2 - - HS-BM332 13.643-5/8 - 3 HS-BM340 14.743-3/4 3-1/2 - HS-BM348 17.103-7/8 - - HS-BM356 17.244 - - HS-BM400 17.804-1/8 - 3-1/2 HS-BM408 18.484-1/4 4 - HS-BM416 23.104-3/8 - - HS-BM424 25.424-1/2 - 4 HS-BM432 25.424-3/4 - - HS-BM448 27.725 - - HS-BM500 30.045-1/2 - - HS-BM532 32.345-3/4 - - HS-BM548 43.906 - - HS-BM600 50.82

6-5/16 - - HS-BM620 73.246-1/2 - - HS-BM632 76.246-5/8 - 6 HS-BM640 82.487 - - HS-BM700 82.487-7/8 - - HS-BM756 90.568-1/4 - - HS-BM816 90.56

HSM-3HSM-6

orHSM-9

HSM-4HSM-5

orHSM-7

HSM-4or

HSM-5

HSM-4or

HSM-5

EXTRA LARGE HOLE SAWS

ST-16

METRIC HOLE SAWSVARIABLE PITCH

Metric Bi-Metal Hole Saws have a high speed steel cutting edge, electron-beam welded to a tough alloy steel back. Theycut clean and accurate holes 1-1/2" (38.1mm) deep in virtually any machinable material - steel, cast iron, stainless steel,non-ferrous metals, wood, or plastics. Arbor is sold separately. Extra Large Hole Saws are any hole saw larger than 152mm.

ICS USA HEAVY DUTY

METRIC HOLE SAW KITSPLASTIC CASES

(M3) BI-METAL

SEPARATEARBOR STYLE

(M3) BI-METAL

RED FINISH

SIZE(mm)

PIPETAPSIZE

PIPEENTRANCE

SIZE

USEARBOR

NO.ITEMNO. PRICE

SIZE(mm)

PIPETAPSIZE

PIPEENTRANCE

SIZE

USEARBOR

NO.ITEMNO. PRICE

14mm 3/8 1/4 HS-BMM014.00 $ 6.60 16mm - - HS-BMM016.00 6.20 17mm - - HS-BMM017.00 6.20 19mm 1/2 3/8 HS-BMM019.00 6.20 20mm - - HS-BMM020.00 6.20 21mm - - HS-BMM021.00 6.20 22mm 3/4 1/2 HS-BMM022.00 6.36 24mm - - HS-BMM024.00 6.36 25mm - - HS-BMM025.00 6.36 27mm - - HS-BMM027.00 6.48 29mm 1 3/4 HS-BMM029.00 6.48 30mm - - HS-BMM030.00 6.48 32mm - - HS-BMM032.00 6.60 33mm - - HS-BMM033.00 6.60 35mm - 1 HS-BMM035.00 7.02 37mm - - HS-BMM037.00 7.02 38mm 1-1/4 - HS-BMM038.00 7.32 40mm - - HS-BMM040.00 7.32 41mm - - HS-BMM041.00 7.32 43mm - - HS-BMM043.00 7.64 44mm 1-1/2 1-1/4 HS-BMM044.00 9.00 46mm - - HS-BMM046.00 9.00 48mm - - HS-BMM048.00 9.00 51mm - 1-1/2 HS-BMM050.00 9.00 52mm - - HS-BMM052.00 11.18 54mm - - HS-BMM054.00 11.18 57mm 2 - HS-BMM057.00 11.18 59mm - - HS-BMM059.00 11.18 60mm - - HS-BMM060.00 11.18 64mm - 2 HS-BMM064.00 12.00

65mm - - HS-BMM065.00 $12.00 67mm 2-1/2 - HS-BMM067.00 12.00 70mm - - HS-BMM070.00 12.00 73mm - - HS-BMM073.00 12.00 76mm - 2-1/2 HS-BMM076.00 12.36 79mm - - HS-BMM079.00 12.36 83mm 3 - HS-BMM083.00 13.64 86mm - - HS-BMM086.00 13.64 89mm - - HS-BMM089.00 13.64 92mm - 3 HS-BMM092.00 14.74 95mm 3-1/2 - HS-BMM095.00 17.10 98mm - - HS-BMM098.00 17.24102mm - - HS-BMM102.00 17.80105mm - 3-1/2 HS-BMM105.00 18.48108mm 4 - HS-BMM108.00 23.10111mm - - HS-BMM111.00 25.42114mm - 4 HS-BMM114.00 25.42121mm - - HS-BMM121.00 25.42127mm - - HS-BMM127.00 27.72133mm - - HS-BMM133.00 30.04140mm - - HS-BMM140.00 32.34146mm - - HS-BMM146.00 43.90152mm - - HS-BMM152.00 50.82

160mm - 6 HS-BMM160.00 73.24165mm - - HS-BMM165.00 76.24168mm - - HS-BMM168.00 82.48177mm - - HS-BMM177.00 82.48200mm - - HS-BMM200.00 90.56210mm - - HS-BMM210.00 90.56

HSM-3HSM-6

orHSM-9

HSM-4HSM-5

orHSM-7

HSM-4or

HSM-5

HSM-4or

HSM-5

HSM-4or

HSM-5


MECHANIC’S METRIC HOLE SAW KIT - 1 ea. 22mm, HSK-BMM-06M $ 77.8825mm, 29mm, 32mm, 38mm Hole Saws, HSM-6 Arbor.

MAINTENANCE METRIC HOLE SAW KIT - 1 ea. 19mm, 22mm, HSK-BMM-13M 206.5229mm, 35mm, 38mm, 44mm, 51mm, 57mm, 64mm Hole Saws, HSM-3, HSM-4, HSM-6 Arbors and 12" extension.PLUMBER’S METRIC HOLE SAW KIT - 1 ea. 19mm, 22mm, HSK-BMM-09P 139.2829mm, 38mm, 44mm, 57mm Hole Saws,HSM-3 and HSM-4 Arbors, and HSPD-3S Pilot Drill.

ELECTRICIAN’S METRIC HOLE SAW KIT - 1 ea. 22mm, HSK-BMM-09E 151.9229mm, 35mm, 44mm, 51mm, 64mm Hole Saws,HSM-3 and HSM-4 Arbors, and HSPD-3S Pilot Drill.


ST-17

HOLE SAWSVARIABLE PITCH

Bi-Metal Hole Saws have a high speed steel cutting edge, electron-beam welded to a tough alloy steel back. They cutclean and accurate holes 1-1/2" deep in virtually any machinable material - steel, cast iron, stainless steel, non-ferrousmetals, wood, or plastics.

ICS USA HEAVY DUTY

HOLE SAW KITS (BUILT-IN ARBOR)

(M3) BI-METAL

(M3) BI-METAL

BUILT-IN 7/16”ARBOR STYLE

PLASTIC CASES

RED FINISH

7/16”

MECHANIC’S HOLE SAW KIT - 1 ea. 7/8, 1, 1-1/8, 1-1/4, HSK-BMA-06 $ 82.881-1/2 Hole Saws, and 1 Pilot Drill

ELECTRICIAN’S HOLE SAW KIT - 1 ea. 7/8, 1-1/8, 1-3/8, HSK-BMA-09E 116.941-3/4, 2, 2-1/2 Hole Saws, and 3 Pilot Drills

PLUMBER’S HOLE SAW KIT - 1 ea. 3/4, 7/8, 1-1/8, 1-1/2, HSK-BMA-09P 110.941-3/4, 2-1/4 Hole Saws, and 3 Pilot Drills

LOCKSMITH’S HOLE SAW KIT- 1 ea. 3/4, 7/8, 1, 1-3/8, HSK-BMA-13L 152.701-1/2, 1-5/8, 1-3/4, 2-1/8 Hole Saws, 4 Pilot Drills and 1 Screwdriver

MAINTENANCE HOLE SAW KIT - 1 ea. 3/4, 7/8, 1-1/8, 1-3/8, HSK-BMA-15M 192.161-1/2, 1-3/4, 2, 2-1/4, 2-1/2 Hole Saws, 4 Pilot Drills, 12" Extension, and 1 Screwdriver


SIZE

PIPETAPSIZE

PIPEENTRANCE

SIZEITEMNO. PRICE SIZE

PIPETAPSIZE

PIPEENTRANCE

SIZEITEMNO. PRICE

9/16 3/8 1/4 HS-BMA036 $ 8.685/8 - - HS-BMA040 8.6811/16 - - HS-BMA044 8.683/4 1/2 3/8 HS-BMA048 8.6013/16 - - HS-BMA052 9.247/8 3/4 1/2 HS-BMA056 9.2415/16 - - HS-BMA060 9.241 - - HS-BMA100 9.241-1/16 - - HS-BMA104 9.241-1/8 1 3/4 HS-BMA108 9.241-3/16 - - HS-BMA112 9.241-1/4 - - HS-BMA116 9.241-5/16 - - HS-BMA120 9.241-3/8 - 1 HS-BMA124 9.841-7/16 - - HS-BMA128 9.841-1/2 1-1/4 - HS-BMA132 9.841-9/16 - - HS-BMA136 9.841-5/8 - - HS-BMA140 9.841-11/16 - - HS-BMA144 9.841-3/4 1-1/2 1-1/4 HS-BMA148 11.561-13/16 - - HS-BMA152 11.561-7/8 - - HS-BMA156 11.562 - 1-1/2 HS-BMA200 11.562-1/16 - - HS-BMA204 13.862-1/8 - - HS-BMA208 13.862-1/4 2 - HS-BMA216 13.862-5/16 - - HS-BMA220 13.862-3/8 - - HS-BMA224 13.862-1/2 - 2 HS-BMA232 15.60

2-9/16 - - HS-BMA236 $15.602-5/8 2-1/2 - HS-BMA240 15.602-3/4 - - HS-BMA248 15.602-7/8 - - HS-BMA256 15.603 - 2-1/2 HS-BMA300 16.183-1/8 - - HS-BMA308 16.183-1/4 3 - HS-BMA316 18.483-3/8 - - HS-BMA324 18.483-1/2 - - HS-BMA332 18.483-5/8 - 3 HS-BMA340 20.803-3/4 3-1/2 - HS-BMA348 24.843-7/8 - - HS-BMA356 25.424 - - HS-BMA400 27.724-1/8 - 3-1/2 HS-BMA408 27.724-1/4 4 - HS-BMA416 32.344-3/8 - - HS-BMA424 39.284-1/2 - 4 HS-BMA432 48.524-3/4 - - HS-BMA448 53.145 - - HS-BMA500 57.765-1/2 - - HS-BMA532 69.306 - - HS-BMA600 74.74

6-5/16 - - HS-BMA620 79.366-1/2 - - HS-BMA632 81.786-5/8 - 6 HS-BMA640 83.427 - - HS-BMA700 88.047-7/8 - - HS-BMA756 96.248-1/4 - - HS-BMA816 96.24


ST-18

METRIC HOLE SAW KITS (BUILT-IN ARBOR)

METRIC HOLE SAWSVARIABLE PITCH

Metric Bi-Metal Hole Saws have a high speed steel cutting edge, electron-beam welded to a tough alloy steel back. Theycut clean and accurate holes 1-1/2” (38.1mm) deep in virtually any machinable material - steel, cast iron, stainless steel,non-ferrous metals, wood, or plastics.

ICS USA HEAVY DUTY

PLASTIC CASES

(M3) BI-METAL

(M3) BI-METAL

BUILT-IN 7/16”ARBOR STYLE

7/16”

RED FINISH

MECHANIC’S METRIC HOLE SAW KIT - 1 ea. 22mm, 25mm, HSK-BMMA-06 $ 82.8829mm, 32mm, 38mm Hole Saws, and 1 Pilot Drill

ELECTRICIAN’S METRIC HOLE SAW KIT - 1 ea. 22mm, HSK-BMMA-09E 116.9429mm, 35mm, 44mm, 51mm, 64mm Hole Saws, and 3 Pilot Drills

PLUMBER’S METRIC HOLE SAW KIT - 1 ea. 19mm, 22mm, HSK-BMMA-09P 110.9429mm, 38mm, 44mm, 57mm Hole Saws, and 3 Pilot Drills

LOCKSMITH’S METRIC HOLE SAW KIT- 1 ea. 19mm, 22mm, HSK-BMMA-13L 152.7025mm, 35mm, 38mm, 41mm, 44mm, 54mm Hole Saws,4 Pilot Drills and 1 Screwdriver

MAINTENANCE METRIC HOLE SAW KIT - 1 ea. 19mm, HSK-BMMA-15M 192.1622mm, 29mm, 35mm, 38mm, 44mm, 51mm, 57mm,64mm Hole Saws, 4 Pilot Drills, 12" Extension and 1 Screwdriver


SIZE

PIPETAPSIZE

PIPEENTRANCE

SIZEITEMNO. PRICE SIZE

PIPETAPSIZE

PIPEENTRANCE

SIZEITEMNO. PRICE

14mm 3/8 1/4 HS-BMMA014.00 $8.68 16mm - - HS-BMMA016.00 8.68 17mm - - HS-BMMA017.00 8.68 19mm 1/2 3/8 HS-BMMA019.00 8.68 20mm - - HS-BMMA020.00 9.24 21mm - - HS-BMMA021.00 9.24 22mm 3/4 1/2 HS-BMMA022.00 9.24 24mm - - HS-BMMA024.00 9.24 25mm - - HS-BMMA025.00 9.24 27mm - - HS-BMMA027.00 9.24 29mm 1 3/4 HS-BMMA029.00 9.24 30mm - - HS-BMMA030.00 9.24 32mm - - HS-BMMA032.00 9.24 33mm - - HS-BMMA033.00 9.24 35mm - 1 HS-BMMA035.00 9.24 37mm - - HS-BMMA037.00 9.24 38mm 1-1/4 - HS-BMMA038.00 9.24 40mm - - HS-BMMA040.00 9.24 41mm - - HS-BMMA041.00 9.24 43mm - - HS-BMMA043.00 9.24 44mm 1-1/2 1-1/4 HS-BMMA044.00 11.56 46mm - - HS-BMMA046.00 11.56 48mm - - HS-BMMA048.00 11.56 51mm - 1-1/2 HS-BMMA051.00 11.56 52mm - - HS-BMMA052.00 13.86 54mm - - HS-BMMA054.00 13.86 57mm 2 - HS-BMMA057.00 13.86 59mm - - HS-BMMA059.00 13.86 60mm - - HS-BMMA060.00 13.86 64mm - 2 HS-BMMA064.00 15.60

65mm - - HS-BMMA065.00 $15.60 67mm 2-1/2 - HS-BMMA067.00 15.60 70mm - - HS-BMMA070.00 15.60 73mm - - HS-BMMA073.00 15.60 76mm - 2-1/2 HS-BMMA076.00 16.18 79mm - - HS-BMMA079.00 16.18 83mm 3 - HS-BMMA083.00 18.48 86mm - - HS-BMMA086.00 18.48 89mm - - HS-BMMA089.00 18.48 92mm - 3 HS-BMMA092.00 20.80 95mm 3-1/2 - HS-BMMA095.00 24.84 98mm - - HS-BMMA098.00 25.42 102mm - - HS-BMMA102.00 27.72 105mm - 3-1/2 HS-BMMA105.00 27.72 108mm 4 - HS-BMMA108.00 32.34 111mm - - HS-BMMA111.00 39.28 114mm - 4 HS-BMMA114.00 48.52 121mm - - HS-BMMA121.00 53.14 127mm - - HS-BMMA127.00 57.76 140mm - - HS-BMMA140.00 69.30 146mm - - HS-BMMA146.00 - 152mm - - HS-BMMA152.00 74.74

160mm - - HS-BMMA160.00 79.36 165mm - - HS-BMMA165.00 81.78 168mm - 6 HS-BMMA168.00 83.42 177mm - - HS-BMMA177.00 88.04 200mm - - HS-BMMA200.00 96.24 210mm - - HS-BMMA210.00 96.24


ST-19

HOLE SAW ARBOR / 1/4" PILOT DRILLS

Fits all standard Bi-Metal Hole Saws.

ICS USA MANDRELS

PLUG EJECTING (HOLE SAW) ARBOR ADAPTER WITH 1/4" PILOT DRILL

HOW TO USE

Plug Ejecting Arbor Adapters convert all standard Hole Saws into plug ejecting style. Just screw adapter into holesaw, then insert Plug Ejecting Arbor, cut hole, put drill in reverse and plug is ejected. Speeds up production 400%.

ICS USA ADAPTERS

1. Drill Hole 2. Wedge Saw 3. Reverse Drill to Eject Plug 4. Spin Cup Forward to Reset Saw

ITEMNO.DESCRIPTION

FITS HOLESAWS

SHANKSIZE

THREADSIZE PRICE

HSMA-PE1 3/4 to 1-3/16 1/4 Hex 1/2-20 $18.26HSMA-PE2 1-1/4 to 6 3/8 Hex 5/8-18 18.26

ITEMNO.DESCRIPTION FITS HOLE SAWS

SHANKSIZE

THREADSIZE PRICE

HSM-39/16 to 1-3/16 7/16 Hex1/2-20 $12.02

HSM-41-1/4 to 6 7/16 Hex5/8-18 20.40

20.40

8.66

12.86

HSM-51-1/4 to 6 5/8 Hex5/8-18

HSM-69/16 to 1-1/2 1/4 Rd1/2-20

HSM-71-1/4 to 1-7/16 7/16 Hex5/8-18

HSM-99/16 to 1-3/16 5/16 Hex1/2-20

HSM-9QC9/16 to 1-3/16 1/4 HexQuick Change

1/2-20

CALLHSM-10QC1-3/4 to 3 1/4 HexQuick Change

5/8-18

CALLHSM-3SDS9/16 to 1-3/16 SDS Shank1/2-20

CALLHSM-4SDS1-1/4 to 7-7/8 SDS ShankQuick Change

5/8-18

CALLHSM4-SDSPD1-1/4 to 7-7/8 SDS ShankQuick Change

5/8-18

12.02

CALL

ST-20

SPECIAL PURPOSE

MANDREL (ARBOR) ADAPTER

Adapts Arbors with 1/2-20 threads to fit hole sawswith 5/8-18 threads.

HOLE SAW EXTENSIONS

For boring jobs requiring longer reach. Extensions can beconnected to one another for extra long reach. Hex wrenchincluded.

SPECIAL PURPOSE

SPECIAL PURPOSE

PILOT DRILL

For use in Hole Saws, Hole Cutters, and other Pilot Tools.

3 STEPS ON SHANK FOR SET SCREW

HOLE SAW PILOT DRILLSSPECIAL PURPOSE

ICS Hole Saw Pilot Drills fit all styles of Hole Saws and are available with a 118° point or 135° split point.

118° / 135° S/P ICS WIS

HIGH SPEED STEEL

CARBIDE TIPPED

3 STEPS ON SHANK FOR SET SCREW 3 FLATS ON SHANK

ITEM NO.DESCRIPTION PRICE

ITEM NO.HEX SHANK LENGTH PRICEITEM NO.SIZE DESCRIPTION PRICE

DESCRIPTIONITEMNO.

SIZEDIA. x LGTH.

DRILLPOINT PRICE

UNITPKG.

1/4 x 4 118° Point 3 Ground Steps on Shank for Set Screws HSPD-3S $2.80 10/12 1/4 x 4 135° Split Point 3 Ground Steps on Shank for Set Screws HSPD-3SH 2.80 10/12 1/4 x 4 118° Point 3 Ground Flats on Shank (3 Sides) HSPD-3F 2.80 10/12 1/4 x 4 135° Split Point 3 Ground Flats on Shank (3 Sides) HSPD-3FH 2.80 10/12

Fits HSM-3, HSM-6, and HSMA $5.00 HSM-9 Mandrels

7/16 12 HSX028 $12.32 1/4x4 3 Steps on Shank for Set Screw CTHSPD016 $6.72

ST-21

HOLE SAWS

Carbide Tipped Hole Saws retain their cutting edge up to 10 times longer than high speed steel hole saws. They cutclean and accurate holes 1-7/8" deep. Carbide tips withstand heat and abrasion extremely well and can be run at fasterspeeds, resulting in a reduction of cutting time and cost per cut. Carbide Tipped Hole Saws are not designed for cuttingconcrete, steel, or other ferrous materials. They are designed for cutting abrasive materials; i.e. fiberglass, particle board,aluminum castings, copper and asbestos board.

HOLE SAW KIT

CARBIDE TIPPED

CARBIDE TIPPED

CARBIDE TIPPED ICS USA SPECIAL PURPOSE

PLASTIC CASES

MAINTENANCE CARBIDE TIPPED HOLE SAW KIT - 1 ea. 3/4, 7/8, 1-1/8, 1-3/8, 1-1/2, 1-3/4, 2, HSK-CT-13M $280.002-1/4, 2-1/2 Hole Saws, HSM-3, HSM-4, HSM-6 Arbors and 12" extension.


SIZE

PIPETAPSIZE

PIPEENTRANCE

SIZE

USEARBOR


PIPETAPSIZE

PIPEENTRANCE

SIZE

USEARBOR

NO.ITEMNO. PRICE

3/4 1/2 3/8 HS-CT048 $ 17.2413/16 - - HS-CT052 16.877/8 3/4 1/2 HS-CT056 17.3815/16 - - HS-CT060 18.031 - - HS-CT100 18.541-1/16 - - HS-CT104 19.191-1/8 1 3/4 HS-CT108 19.651-3/16 - - HS-CT112 20.351-1/4 - - HS-CT116 20.441-5/16 - - HS-CT120 20.581-3/8 - 1 HS-CT124 20.761-7/16 - - HS-CT128 20.811-1/2 1-1/4 - HS-CT132 21.271-9/16 - - HS-CT136 22.061-5/8 - - HS-CT140 22.571-11/16 - - HS-CT144 23.081-3/4 1-1/2 1-1/4 HS-CT148 23.641-13/16 - - HS-CT152 24.151-7/8 - - HS-CT156 24.662 - 1-1/2 HS-CT200 25.352-1/16 - - HS-CT204 29.342-1/8 - - HS-CT208 29.852-1/4 2 - HS-CT216 30.872-5/16 - - HS-CT220 31.47

HSM-3HSM-6

orHSM-9

HSM-4HSM-5

orHSM-7

HSM-4or

HSM-5

HSM-4or

HSM-5

2-3/8 - - HS-CT224 $ 31.892-1/2 - 2 HS-CT232 33.372-9/16 - - HS-CT236 33.932-5/8 2-1/2 - HS-CT240 33.442-3/4 - - HS-CT248 35.502-7/8 - - HS-CT256 36.573 - 2-1/2 HS-CT300 37.593-1/8 - - HS-CT308 45.243-1/4 3 - HS-CT316 46.443-3/8 - - HS-CT324 49.363-1/2 - - HS-CT332 50.013-5/8 - 3 HS-CT340 51.083-3/4 3-1/2 - HS-CT348 52.513-7/8 - - HS-CT356 53.534 - - HS-CT400 55.814-1/8 - 3-1/2 HS-CT408 77.504-1/4 4 - HS-CT416 80.284-3/8 - - HS-CT424 81.304-1/2 - 4 HS-CT432 81.724-3/4 - - HS-CT448 88.995 - - HS-CT500 91.595-1/2 - - HS-CT532 96.455-3/4 - - HS-CT548 106.036 - - HS-CT600 112.42

ST-22

HOLE CUTTERSSPECIAL PURPOSE

CARBIDE TIPPED

ICS3 FLATSHANK

Carbide Tipped Fractional and Metric Hole Cutters are designed for cutting steel plate, stainless steel, galvanized iron,fiberglass, aluminum, and copper up to 3/16� thick. Built-in safety stopper prevents over penetration. Ejector spring ejectsslug to save production time. The center drill is a Titanium Nitride coated 135° split point drill. Used by electricians,plumbers, auto and truck repairmen, and general contractors. Outlasts hole saws 5 to 1.

HOLE CUTTER SETSCARBIDE TIPPED

SIZESHANK

DIA.PILOTDRILL PRICEITEM NO.

9/16 3/8 6mm CTHC036 $18.20 5/8 3/8 6mm CTHC040 20.80 3/4 3/8 6mm CTHC048 24.60 7/8 3/8 6mm CTHC056 26.80 1 3/8 6mm CTHC100 32.60 1-1/8 3/8 6mm CTHC108 37.80 1-1/4 3/8 6mm CTHC116 41.60 1-3/8 3/8 6mm CTHC124 45.60 1-1/2 3/8 6mm CTHC132 49.40 1-5/8 3/8 6mm CTHC140 53.20 1-3/4 3/8 6mm CTHC148 57.20 1-7/8 3/8 6mm CTHC156 62.40 2 3/8 6mm CTHC200 66.40 2-1/8 3/8 6mm CTHC208 70.20 2-1/4 3/8 6mm CTHC216 74.20 2-3/8 3/8 6mm CTHC224 78.00 2-1/2 1/2 6mm CTHC232 83.20 2-5/8 1/2 6mm CTHC240 87.00 2-3/4 1/2 6mm CTHC248 91.00 2-7/8 1/2 6mm CTHC256 95.00 3 1/2 6mm CTHC300 98.80 3-1/8 1/2 6mm CTHC308 102.60 3-1/4 1/2 6mm CTHC316 106.00 3-3/8 1/2 6mm CTHC324 111.80 3-1/2 1/2 6mm CTHC332 115.60 3-5/8 1/2 6mm CTHC340 119.60 3-3/4 1/2 6mm CTHC348 123.40 3-7/8 1/2 6mm CTHC356 127.40 4 1/2 6mm CTHC400 132.60 4-1/8 1/2 6mm CTHC408 137.00 4-1/4 1/2 6mm CTHC416 140.40 4-1/2 1/2 6mm CTHC432 148.20

SIZESHANK

DIA.PILOTDRILL PRICEITEM NO.

14mm 10mm 6mm CTHCM014.0 $18.20 16mm 10mm 6mm CTHCM016.0 20.80 19mm 10mm 6mm CTHCM019.0 24.60 22mm 10mm 6mm CTHCM022.0 26.80 25mm 10mm 6mm CTHCM025.0 32.60 29mm 10mm 6mm CTHCM029.0 37.80 32mm 10mm 6mm CTHCM032.0 41.60 35mm 10mm 6mm CTHCM035.0 45.60 38mm 10mm 6mm CTHCM.38.0 49.40 41mm 10mm 6mm CTHCM041.0 53.20 44mm 10mm 6mm CTHCM044.0 57.20 48mm 10mm 6mm CTHCM048.0 62.40 51mm 10mm 6mm CTHCM051.0 66.40 54mm 10mm 6mm CTHCM054.0 70.20 57mm 10mm 6mm CTHCM057.0 74.20 60mm 10mm 6mm CTHCM060.0 78.00 64mm 13mm 6mm CTHCM064.0 83.20 67mm 13mm 6mm CTHCM067.0 87.00 70mm 13mm 6mm CTHCM070.0 91.00 73mm 13mm 6mm CTHCM073.0 95.00 76mm 13mm 6mm CTHCM076.0 98.80 79mm 13mm 6mm CTHCM079.0 102.60 83mm 13mm 6mm CTHCM083.0 106.00 86mm 13mm 6mm CTHCM086.0 111.80 89mm 13mm 6mm CTHCM089.0 115.60 92mm 13mm 6mm CTHCM092.0 119.60 95mm 13mm 6mm CTHCM095.0 123.40 98mm 13mm 6mm CTHCM098.0 127.40 102mm 13mm 6mm CTHCM102.0 132.60 105mm 13mm 6mm CTHCM105.0 137.00 108mm 13mm 6mm CTHCM108.0 140.40 114mm 13mm 6mm CTHCM114.0 148.20

Electrician’s Carbide Tipped Hole Cutter Set HCS-CT-6E $352.001 each 7/8�, 1-1/8�, 1-3/8�, 1-3/4�, 2�, 2-1/2� Packaged in a plastic case.

ICS WIS

Fractional Sizes 9/16 to 4-1/2 Dia. Metric Sizes 14mm to 114mm Dia.


ST-23

Carbide Grit Edged Hole Saws have no teeth to chip or dull and will last up to 10 times longer than High Speed SteelHole Saws. Cuts almost all the materials which diamond hole saws can cut at less than half the cost. Used to cut themost difficult work encountered: cast iron, ceramic tile, fiberglass (all types), plastic laminates, etc.

MECHANIC’S CARBIDE GRIT EDGED HOLE SAW KIT - HSK-CE-06M $214.161ea. 7/8, 1, 1-1/8, 1-1/4, 1-1/2 Hole Saws, HSM-6 Arbor.

MAINTENANCE CARBIDE GRIT EDGED HOLE SAW KIT - HSK-CE-13M 487.461 ea. 3/4, 7/8, 1-1/8, 1-3/8, 1-1/2, 1-3/4, 2, 2-1/4, 2-1/2 Hole Saws, HSM-3, HSM-4, HSM-6 Arbors and12" Extension.

PLUMBER’S CARBIDE GRIT EDGED HOLE SAW KIT - HSK-CE-09P 315.561 ea. 3/4, 7/8, 1-1/8, 1-1/2, 1-3/4, 2-1/4 Hole Saws, HSM-3 and HSM-4 Arbors, and HSPD-3S Pilot Drill.

ELECTRICIAN’S CARBIDE GRIT EDGED HOLE SAW KIT - HSK-CE-09E 340.641 ea. 7/8, 1-1/8, 1-3/8, 1-3/4, 2, 2-1/2 Hole Saws, HSM-3 andHSM-4 Arbors, and HSPD-3S Pilot Drill.

HOLE SAWSCARBIDE GRIT EDGE ICS USA SPECIAL PURPOSE

HOLE SAW KITSPLASTIC CASES

CARBIDE GRIT EDGED

CARBIDE GRIT EDGED


SIZE

PIPETAPSIZE

PIPEENTRANCE

SIZE

USEARBOR


PIPETAPSIZE

PIPEENTRANCE

SIZE

USEARBOR

NO.ITEMNO. PRICE

3/4 1/2 3/8 HS-CE048 $19.5013/16 - - HS-CE052 19.507/8 3/4 1/2 HS-CE056 19.6015/16 - - HS-CE060 20.501 - - HS-CE100 21.001-1/16 - - HS-CE104 21.501-1/8 1 3/4 HS-CE108 21.501-3/16 - - HS-CE112 22.001-1/4 - - HS-CE116 22.501-3/8 - 1 HS-CE124 23.301-1/2 1-1/4 - HS-CE132 24.501-9/16 - - HS-CE136 25.001-11/16 - - HS-CE144 25.001-3/4 1-1/2 1-1/4 HS-CE148 25.302 - 1-1/2 HS-CE200 27.802-1/8 - - HS-CE208 29.002-1/4 2 - HS-CE216 31.002-3/8 - - HS-CE224 32.302-1/2 - 2 HS-CE232 34.50

2-9/16 - - HS-CE236 $36.002-5/8 2-1/2 - HS-CE240 36.002-3/4 - - HS-CE248 36.602-7/8 - - HS-CE256 39.003 - 2-1/2 HS-CE300 40.103-1/8 - - HS-CE308 42.003-1/4 3 - HS-CE316 42.903-1/2 - - HS-CE332 45.503-5/8 - 3 HS-CE340 50.003-3/4 3-1/2 - HS-CE348 52.004 - - HS-CE400 54.004-1/8 - 3-1/2 HS-CE408 .-4-1/4 4 - HS-CE416 57.004-1/2 - 4 HS-CE432 60.004-3/4 - 4 HS-CE448 62.005 - 4 HS-CE500 67.005-1/2 - 4 HS-CE532 80.006 - 4 HS-CE600 93.20

HSM-3HSM-6

orHSM-9

HSM-4HSM-5HSM-7

HSM-4or

HSM-5

HSM-4or

HSM-5

ST-24

ICS ICS

Recessed Lighting Hole Saws are designed for electricians. They are used to drill holes in ceilings for recessed lightingfixtures. Carbide Grit Edged Hole Saws have no teeth to eliminate snagging. Will cut almost any ceiling materialencountered.

D-Drive Hole Saws are specifically designed to drill plumbing installation holes in fiberglass bathtubs, showers, spas,hot tubs etc. D-Drive Hole Saws derive their name from having a “D” shaped arbor hole.

For use in “D” Drive Hole Saws and other Hole Saws.

HIGH SPEED STEEL CARBIDE TIPPED

RECESSED LIGHTING HOLE SAWSCARBIDE GRIT EDGED ICS USA SPECIAL PURPOSE

CARBIDE GRIT EDGED

“D” DRIVE HOLE SAWSCARBIDE GRIT EDGED ICS USA SPECIAL PURPOSE

CARBIDE GRIT EDGED

“D” DRIVE ARBOR/PILOT DRILLS ICS USA SPECIAL PURPOSE

4-3/8 HSM-4 Mini Juno, Capri, Marco, Halo HS-RL424 $63.00 6-3/8 or Halo, Capri HS-RL624 71.00 6-5/8 HSM-5 Juno, Progress HS-RL640 71.00 6-7/8 Lithonia, Marco, Progress, Capri, Lightlolier, Preacolite HS-RL656 71.00

1-1/4 HSM-CT HS-DD116 $16.80 1-3/8 or HS-DD124 17.30 1-3/4 HSM-2 HS-DD148 18.72

3/8 Carb. Tip HSM-CT $14.68 1/4 HSS HSM-2 10.08

SIZEUSE

ARBOR NO.USE WITH THESE

LIGHTING FIXTURES PRICEITEM NO.

SIZE USE ARBOR NO. PRICEITEM NO.

PILOT DRILLSHANK SIZE PRICEITEM NO.

ST-25

(920) 837-2526 • FAX (920) 837-2530 • Toll Free 1-800-331-6043www.icscuttingtools.com • [email protected]

WISCONSIN

ICS CUTTING TOOLS, INC511 MAIN STREET • CASCO, WI 54205-0125 USA

DISTRIBUTED BY: OUR REPRESENTATIVE IS:

ics cutting tools, inc · ics cutting tools, inc 511 main street † casco, wi 54205-0125 usa (920)...

Documents