icr chrome surface system - english
TRANSCRIPT
Sprint Chrome Surface System has been designed by ICR Research & Development Lab. It has outstanding performances, very high chemical/ physical outdoor resistance and can guarantee excellent long-lasting chrome effect to surfaces.
Excellent stability to light
Decor / design
High resistance to detergents
Helmets
High surface hardness(both glossy and matt)
Lighting
Perfect adhesion on different substrates (metal, plastic, glass)
General items
High resistance to solvents
Automotive (TUNING)
Easy application
Household appliances
MAIN FEATURES
MAIN SECTORS
POLYURETHANIC SOLVENT-BASED PRIMER,BASED ON ACRYLIC HYDROXYLATED RESINS
MET-CHROME EFFECT 1K BASECOAT, BASED ON MODIFIED POLYMERIC RESINS
FINISHING 2K CLEARCOAT,BASED ON ACRYLIC HYDROXYLATED RESINS
Our primer and finishing clearcoat are specifically designed to achieve the best results Other basecoats/clearcoats can’t guarantee the same results
2K BLACKPRIMER
BASECOATCHROME
2K SPECIALCLEARCOAT
For the application of Chrome Surface System on glass and metal, it is necessary to apply a specific primer
Excellent quality chrome effect Value for money
DELIVERY CHARACTERISTICSDelivery viscosity 100 ±10” DIN4 20°C (s)
Specific gravity 1,000 ±0,030 Kg/l
Solid by weight 49 ±2 (3 hrs at 105°C) % in weight
Film thickness 25 - 35 Microns
Stability/Storage temperature 12 months (+5°C/+35°C)
SUPPORT/APPLICATION
Hardener 100 parts of 3A01NNR0150 / 50 parts of CA008
Thinner 50-60% 8P022
Application viscosity 16 - 18 DIN4 20°C (s)
Oven drying time 120’ at 60°C or 24hrs in air-dry
Pot life 3 hours
FILM CHARACTERISTICSColour Black
DELIVERY CHARACTERISTICSDelivery viscosity 14 ± 2” CF/4 20°C (s)
Specific gravity 0,900 ±0,030 Kg/l
Solid by weight 2 ±0,2 (3hrs at 105°C) % in weight
Film thickness 1 ±0,3 Microns
Stability/Storage temperature 12 months (+5°C/+35°C)
SUPPORT/APPLICATIONHardener 1K
Thinner Not necessary
Application viscosity Ready-to-use product
Oven drying time Not applicable
FILM CHARACTERISTICSColour Chrome-effect
2K BLACK PRIMER / PRE-METALLIZATION CODE: 3A010NNR0106306 - 1l package
ACRY-HARD MS STANDARD CODE: CA00816106 - 0.5l package
SPECIAL THINNER CODE: 8P02278106 - 1l package
BASECOAT CHROME SURFACE 9S99 CODE: 4A30ON9S9906306 - 1l package
DELIVERY CHARACTERISTICSDelivery Viscosity 40 ±5” CF/4 20°C (s)
Specific gravity 1,044 ±0,030 Kg/l
Solid by weight 44 ±2 (3hrs at 105°C) % in weight
Film thickness 25 - 35 Microns
Stability/Storage temperature 12 months (+5°C/+35°C)
SUPPORT/APPLICATION
Hardener 100 parts of 4A31LQ9T01 /30 parts of 7PN08
Thinner 30-40% 8P015
Application viscosity 18 ±2 CF4 20°C (s)
Oven drying time 45’ at 60°C
Pot life 3 hours at 20°C
FILM CHARACTERISTICSColour Colourless
Gloss ≥90 Gloss angle 60°
SPECIAL CLEAR 2K GLOSS CODE: 4A31LQ9T0106306 - 1l package
ACRY-HARDENER CR CODE: CA01216106 - 0.5l package
SPECIAL CLEAR THINNER CODE: 8P01578106 - 1l package
CAUTIONS
- The surface must be even and without imperfections.
- The black primer coat must be fully dry before the application of the following coats.
- Avoid touching/sanding the primer surface before the application of the following coats.
- Chrome Surface basecoat must be thoroughly homogenized inside the original container before use.
- Chrome Surface basecoat must be applied with spray guns with nozzle 0.8-1.0 at Air pressure from 2.5 to 3.0 bar, by means of several consecutive light coats, until getting the desired effect.
- Wait 3/5 minutes at air temperature after the application of Chrome Surface basecoat and later apply the specific transparent finishing clearcoat.
- After the transparent clearcoat has dried for 10 minutes at air temperature, dry the other elements of Chrome Surface System for at least 45 minutes at 60° C.
- The full physical-chemical resistances are achieved few days after the physical drying of the surface.
INDUSTRIA CHIMICA REGGIANA - I.C.R. S.p.A - Headquarter and Plant: 42124 Reggio Emilia - Via M. Gasparini 7, Italy - Tel. +39 0522 517803 - Fax +39 0522 514384Lodi Plant: 26817 S. Martino in Strada (LO) - Via del Commercio 1, Italy - Tel. +39 0371 475313 - Fax +39 0371 475370 - [email protected] - www.icrsprint.itICR Ibérica S.A. - Pol. Ind. Sta. Magdalena, C/ Guillem Rovirosa 18-24 - 08800 Vilanova i la Geltrú, España - Tel. +34 93 8932695 - Fax +34 93 8143495 - [email protected]