preliminary

preliminary iC-MHL200 EVAL MHL2MEVALUATION KIT DESCRIPTION

Rev A2, Page 1/4

ORDERING INFORMATION

Type Order Designation Description Options

Evaluation Kit iC-MHL200 EVAL MHL2M Evaluation kit with PCB, magnetic code disc;kit includes board MHL2M populated withiC-MHL200 TSSOP20 and an two index sensors;magnetic code disc MHL1S 30-20 (see Figure 3)

BOARD MHL2M

Figure 1: Component side

TERMINAL DESCRIPTION

J1 Signal output connector(pin configuration designed to connectto board MHL200 EVAL MH2D)

Copyright © 2013, 2016 iC-Haus http://www.ichaus.com

preliminary

preliminary iC-MHL200 EVAL MHL2MEVALUATION KIT DESCRIPTION

Rev A2, Page 2/4

CIRCUIT DESCRIPTION

The MHL2M board features a 20-pin connector. A ribbon cable is part of the kit to connected to the evaluationboard iC-MHL200 EVAL MH2D

J111

J115

J11

J15

C1100nF

14

J113

J16

J14

20

J19

J116

A

A

J1

2

R110k

J1

U2A1101

GND3

VCC1

2VOUT

R20R

2

J17

C310μF

3GND

1VCC

VOUT 2

100nFC2

J1

12

J118

J119

A1101U3

VNA4 11

VND

3VPA VPD

12

VZAP7

15W

Z 10

J110 J1

8B 9

ENZ19

18 GAIN

MA2

NERR17

16 PTE

SLI1

20 SLO

13U14V

100nFC4

U1

iC-MHL200

A

J13

J1174k7R3

J18J1

100nFC1

J1

J1

J1J1

J1

R34k7

C4100nF

linear

B

B

B

Hall iC

B

iC-MHL200

U1

J1 J1

J1

J1

B

U3A1101

C2100nF

J1

J1

10μFC3

B

A1101U2

0RR2

10kR1

J1

J1

J1

A

A

J1

J1

J1

J1J1

Figure 2: Circuit diagram MHL2M

preliminary

preliminary iC-MHL200 EVAL MHL2MEVALUATION KIT DESCRIPTION

Rev A2, Page 3/4

APPLICATION EXAMPLE

MHL1S 30-20

iC-MHL200 EVAL MHL2M

Ribbon Cable

MHL2M

iC-MB3 iCSY MB3U-I2CMHL200 EVAL MH2D

Figure 3: iC-MHL200 eval kit parts

Required eval kit parts:

1. iC-MHL200 EVAL MHL2M (this document)

2. iC-MHL200 EVAL MH2D

3. iC-MB3 iCSY MB3U-I2C

Figure 4: iC-MHL200 evaluation kit connected

preliminary

preliminary iC-MHL200 EVAL MHL2MEVALUATION KIT DESCRIPTION

Rev A2, Page 4/4

RELATED PRODUCTS AND DOCUMENTATION

Item Description Documentation andInformation

iC-MHL200 TSSOP20 Magnetic off-axis absolute position encoder http://www.ichaus.de/product/iC-MHL200

MHL1S 30-20 Magnetic code disc suitable for iC-MHL200

iC-MHL200 EVAL MH2D Evaluation board suitable for MHL2M

iC-MB3 iCSY MB3U-I2C BiSS/SSI and I2C-to-PC adapter (USB) http://www.ichaus.de/product/MB3U-I2C

REVISION HISTORY

Rev Notes Pages affectedA1 Initial versionA2 Figure 3 corrected 3

iC-Haus expressly reserves the right to change its products and/or specifications. An Infoletter gives details as to any amendments and additions made to therelevant current specifications on our internet website www.ichaus.com/infoletter and is automatically generated and shall be sent to registered users by email.Copying – even as an excerpt – is only permitted with iC-Haus’ approval in writing and precise reference to source.

The data specified is intended solely for the purpose of product description and shall represent the usual quality of the product. In case the specifications containobvious mistakes e.g. in writing or calculation, iC-Haus reserves the right to correct the specification and no liability arises insofar that the specification was froma third party view obviously not reliable. There shall be no claims based on defects as to quality in cases of insignificant deviations from the specifications or incase of only minor impairment of usability.No representations or warranties, either expressed or implied, of merchantability, fitness for a particular purpose or of any other nature are made hereunderwith respect to information/specification or the products to which information refers and no guarantee with respect to compliance to the intended use is given. Inparticular, this also applies to the stated possible applications or areas of applications of the product.

iC-Haus products are not designed for and must not be used in connection with any applications where the failure of such products would reasonably beexpected to result in significant personal injury or death (Safety-Critical Applications) without iC-Haus’ specific written consent. Safety-Critical Applicationsinclude, without limitation, life support devices and systems. iC-Haus products are not designed nor intended for use in military or aerospace applications orenvironments or in automotive applications unless specifically designated for such use by iC-Haus.iC-Haus conveys no patent, copyright, mask work right or other trade mark right to this product. iC-Haus assumes no liability for any patent and/or other trademark rights of a third party resulting from processing or handling of the product and/or any other use of the product.

Software and its documentation is provided by iC-Haus GmbH or contributors "AS IS" and is subject to the ZVEI General Conditions for the Supply of Productsand Services with iC-Haus amendments and the ZVEI Software clause with iC-Haus amendments (www.ichaus.com/EULA).