preliminary
preliminary iC-MHL200 EVAL MHL2MEVALUATION KIT DESCRIPTION
Rev A2, Page 1/4
ORDERING INFORMATION
Type Order Designation Description Options
Evaluation Kit iC-MHL200 EVAL MHL2M Evaluation kit with PCB, magnetic code disc;kit includes board MHL2M populated withiC-MHL200 TSSOP20 and an two index sensors;magnetic code disc MHL1S 30-20 (see Figure 3)
BOARD MHL2M
Figure 1: Component side
TERMINAL DESCRIPTION
J1 Signal output connector(pin configuration designed to connectto board MHL200 EVAL MH2D)
Copyright © 2013, 2016 iC-Haus http://www.ichaus.com
preliminary
preliminary iC-MHL200 EVAL MHL2MEVALUATION KIT DESCRIPTION
Rev A2, Page 2/4
CIRCUIT DESCRIPTION
The MHL2M board features a 20-pin connector. A ribbon cable is part of the kit to connected to the evaluationboard iC-MHL200 EVAL MH2D
J111
J115
J11
J15
C1100nF
14
J113
J16
J14
20
J19
J116
A
A
J1
2
R110k
J1
U2A1101
GND3
VCC1
2VOUT
R20R
2
J17
C310μF
3GND
1VCC
VOUT 2
100nFC2
J1
12
J118
J119
A1101U3
VNA4 11
VND
3VPA VPD
12
VZAP7
15W
Z 10
J110 J1
8B 9
ENZ19
18 GAIN
MA2
NERR17
16 PTE
SLI1
20 SLO
13U14V
100nFC4
U1
iC-MHL200
A
J13
J1174k7R3
J18J1
100nFC1
J1
J1
J1J1
J1
R34k7
C4100nF
linear
B
B
B
Hall iC
B
iC-MHL200
U1
J1 J1
J1
J1
B
U3A1101
C2100nF
J1
J1
10μFC3
B
A1101U2
0RR2
10kR1
J1
J1
J1
A
A
J1
J1
J1
J1J1
Figure 2: Circuit diagram MHL2M
preliminary
preliminary iC-MHL200 EVAL MHL2MEVALUATION KIT DESCRIPTION
Rev A2, Page 3/4
APPLICATION EXAMPLE
MHL1S 30-20
iC-MHL200 EVAL MHL2M
Ribbon Cable
MHL2M
iC-MB3 iCSY MB3U-I2CMHL200 EVAL MH2D
Figure 3: iC-MHL200 eval kit parts
Required eval kit parts:
1. iC-MHL200 EVAL MHL2M (this document)
2. iC-MHL200 EVAL MH2D
3. iC-MB3 iCSY MB3U-I2C
Figure 4: iC-MHL200 evaluation kit connected
preliminary
preliminary iC-MHL200 EVAL MHL2MEVALUATION KIT DESCRIPTION
Rev A2, Page 4/4
RELATED PRODUCTS AND DOCUMENTATION
Item Description Documentation andInformation
iC-MHL200 TSSOP20 Magnetic off-axis absolute position encoder http://www.ichaus.de/product/iC-MHL200
MHL1S 30-20 Magnetic code disc suitable for iC-MHL200
iC-MHL200 EVAL MH2D Evaluation board suitable for MHL2M
iC-MB3 iCSY MB3U-I2C BiSS/SSI and I2C-to-PC adapter (USB) http://www.ichaus.de/product/MB3U-I2C
REVISION HISTORY
Rev Notes Pages affectedA1 Initial versionA2 Figure 3 corrected 3
iC-Haus expressly reserves the right to change its products and/or specifications. An Infoletter gives details as to any amendments and additions made to therelevant current specifications on our internet website www.ichaus.com/infoletter and is automatically generated and shall be sent to registered users by email.Copying – even as an excerpt – is only permitted with iC-Haus’ approval in writing and precise reference to source.
The data specified is intended solely for the purpose of product description and shall represent the usual quality of the product. In case the specifications containobvious mistakes e.g. in writing or calculation, iC-Haus reserves the right to correct the specification and no liability arises insofar that the specification was froma third party view obviously not reliable. There shall be no claims based on defects as to quality in cases of insignificant deviations from the specifications or incase of only minor impairment of usability.No representations or warranties, either expressed or implied, of merchantability, fitness for a particular purpose or of any other nature are made hereunderwith respect to information/specification or the products to which information refers and no guarantee with respect to compliance to the intended use is given. Inparticular, this also applies to the stated possible applications or areas of applications of the product.
iC-Haus products are not designed for and must not be used in connection with any applications where the failure of such products would reasonably beexpected to result in significant personal injury or death (Safety-Critical Applications) without iC-Haus’ specific written consent. Safety-Critical Applicationsinclude, without limitation, life support devices and systems. iC-Haus products are not designed nor intended for use in military or aerospace applications orenvironments or in automotive applications unless specifically designated for such use by iC-Haus.iC-Haus conveys no patent, copyright, mask work right or other trade mark right to this product. iC-Haus assumes no liability for any patent and/or other trademark rights of a third party resulting from processing or handling of the product and/or any other use of the product.
Software and its documentation is provided by iC-Haus GmbH or contributors "AS IS" and is subject to the ZVEI General Conditions for the Supply of Productsand Services with iC-Haus amendments and the ZVEI Software clause with iC-Haus amendments (www.ichaus.com/EULA).