hs-100st series vibration sensorimbelectric.com/uploaded/ts004 (1).pdf · hs-100st series vibration...
TRANSCRIPT
Operating Temperature RangeSealingMaximum ShockEmissionsImmunity
-55 to 140 ºCIP675000 gEN61000-6-4:2001EN61000-6-2:1999
Case MaterialSensing Element/ConstructionMounting TorqueMounting Bolt provided
WeightMaximum Cable lengthMating ConnectorMounting ThreadsOptions
Stainless SteelPZT/Compression8 NmM6 x 33 mm long, ¼-28 UNF x 33 mm longor M8 x 33 mm long170 gms (nom)1000 metresHS-AA005See 'How to order' table Mounting cable assemblies, integral cableand other sensitivities
Mounted Base ResonanceSensitivityFrequency Response
IsolationMeasurement RangeTemperatureTransverse SensitivityElectrical
22 kHz (nominal)100 mV/g ±10% Nominal 80 Hz at 22 ºC2 Hz to 10 kHz ±5 %0.8 Hz to 15 kHz ±3 dBBase isolated±80 g10 mV/ºC STANDARD 100°C. Option 140°CLess than 5%
Typical Applications
Proven use in vibration monitoringfor offline applications using commerciallyavailable data collectors and onlinemonitoring systems in the fields ofBuilding Services, Civil Engineering,Paper and Pulp, Mining, Metals Manufacture,Utilities, Automotive, Water and WasteTreatment, Pharmaceutical, Aerospace, etc.
Protecting...Fans, Motors, Pumps, Compressors,Centrifuges, Conveyers, Air Handlers,Gearboxes, Rolls, Dryers, Presses,Cooling, HVAC, Spindles, Machine Tooling,Process Equipment and many more.
HS-100ST Series Vibration Sensor3 Pin MS Connector, Low Profile 100mV/g Industrial Accelerometer with Temperature Sensor
Technical Performance
Environmental
Mechanical
Electrical NoiseCurrent RangeBias VoltageSettling TimeOutput ImpedanceCase Isolation
0.1 mg max0.5 mA to 8 mA10 - 12 Volts DC2 seconds200 Ohms max.>10 Ohms at 500 Volts8
Türkiye: [email protected] Tel: +9 212 544 59 59 www.imbelectric.com
HS-100ST Series Vibration Sensor
TS004.2
Dimensions
Frequency Response
Ref: HS100ST-0109
Mounting of sensor to achieve good repeatable readings.Vibration sensor should be firmly fixed to a flat surface (spotface surface may be needed to be produced and cable anchoredto sensor body.)
How to order
Please contact our Sales Office for information on sensor accessories (mounting studs, etc) and multichannel switch boxes.
We reserve the right to alter the specification of this product without prior notice.
Türkiye: [email protected] Tel: +9 212 544 59 59 www.imbelectric.com