Low cost online means of monitoringvelocity and temperature with thecapability of interfacing direct intoPLC, BMS or any 4-20mA inputmodule.Proven use in vibration monitoring foroffline applications using commerciallyavailable data collectors.

Protecting...Fans, Motors, Pumps, Compressors,Centrifuges, Conveyers, Air Handlers,Gearboxes, Rolls, Dryers, Presses,Cooling, HVAC, Spindles, Machine Tooling,Process Equipment and many more.

Case MaterialSensing Element/ConstructionMounting TorqueWeightMaximum Cable lengthMating Connector / Cable Assembly

Mounting ThreadsOptions

Stainless SteelPZT/Compression8 Nm150 gms (nom)See System drawingM12 Straight or Right Angle- requires screened cable assemblySee 'How to order' table Various cable assemblies,other sensitivities

Certified Temperature Range

Sensor Temperature RangeSealingMaximum ShockEmissionsImmunity

Ex ia IIC T6 Ga (-40°C < Ta < +60°C) (Gas)Ex ia IIIC T80°C IP65 Da ( -40°C < Ta < +60°C) (Dust)Ex ia I Ma ( -40°C < Ta < +60°C) (Mining)-25 to +90°CIP675000 gEN61000-6-4:2001EN61000-6-2:1999

Mounted Base ResonanceAcceleration Ranges

Frequency ResponseIsolationMeasurement RangeTemperature OutputTransverse Sensitivity

Electrical

10 kHz min.0-2 to 0-100 g ±10%Nominal 80 Hz at 22°C10 Hz to 5 kHz ±5 % - ISO10816Base isolated50 g peak10 mV/°CLess than 5%

e

Typical Applications

HS-422IT Series Vibration SensorIntrinsically Safe, M12, 4-20mA Velocity Transducer with Temperature output

Technical Performance

Environmental

Mechanical

Outputs - Acceleration - Temperature

Supply VoltageSettling TimeOutput ImpedanceCase Isolation

4-20 mA DC proportional to RMS Acceleration Range0-1 V proportional to 0-100°C(To convert this to 4-20 mA, use HS-540 Module)15 - 30 Volts DC (for 4-20 mA)2 secondsLoop Resistance 600 Ohms max. at 24 Volts>10 Ohms at 500 Volts8

Türkiye: info@imbelectric.com Tel: +9 212 544 59 59 www.imbelectric.com

Manufactured at :-Hansford Sensors Ltd.Artisan, Hillbottom RoadSands Industrial EstateHigh WycombeBucks. HP12 4HJUnited Kingdom

Maximum Cable LengthSystem Connections for Zener Barrier

System Connections for Galvanic Isolator

Certificate details: Group I + II

Accelerometer System Certificate

Terminal Parameters

500V Isolation

Barrier

Notes:

See System DrawingsM06-011-A (Armoured)M06-013-A (FR Polyurethane)M06-012-A (Silicone)M06-018-A (PUR with M12 connector)M06-031-A (Armoured)M06-33-A (FR Polyurethane)M06-032-A (Silicone)M06-034-A (PUR with M12 connector)

IECEx BAS08.0034XBaseefa08ATEX0086XEII 1GDEx ia IIC T6 GaEx ia IIIC T80°C IP65 Da(-40ºC < Ta < +60ºC)

Baseefa08Y0087Ex ia IIC T6 (-40°C < Ta < +60°C)

Ui = 28V, Ii = 115mA, Pi = 0.65W Group IIUi = 16.5V Pi = 0.65Wor Ui = 28V li = 115mA Pi = 0.65W Group I

Units Will Pass A 500V Isolation Test

1 x Pepperl + Fuchs Galvanic Isolator KFD2-STC4-Ex1, which has supersededKFD2-CR-Ex1.30300 (BAS00ATEX7164)See M06-031-A, M06-033-A, M06-032-Aand M06-034-A

1 x MTL Zener Barrier MTL7787 (BAS01ATEX7217)or Pepperl + Fuchs Zener Barrier Z787 (BAS01ATEX7005) or any other barrier thatconforms to note 2 of sheet 2 of M06-011-A,M06-012-A, M06-013-A and M06-018-A.

Special conditions of safe use for Group II dust.The free end of the cable on the integral cableversion of the apparatus must be terminated inan appropriately certified dust-proof enclosure.The unit has no serviceable parts. e

HS-422IT Series Vibration Sensor

Intrinsically Safe Requirements

Intrinsically Safe, M12, 4-20mA Velocity Transducer with Temperature output

Türkiye: info@imbelectric.com Tel: +9 212 544 59 59 www.imbelectric.com

HS-422IT Series Vibration Sensor

Frequency Response

Ref: HS422IT-M12-Atex-1012

Mounting of sensor to achieve good repeatable readings.Vibration sensor should be firmly fixed to a flat surface (spotface surface may be needed to be produced and cable anchoredto sensor body.)

TS077 Iss06

Please contact our Sales Office for information on sensor accessories (mounting studs, etc) and multichannel switch boxes.

We reserve the right to alter the specification of this product without prior notice.

For full Installation details,see System Connection M06-023-A Sheet 2 M06-035-A

Pin 1 - Temperature output (Brown)Pin 2 - +18 to 30 V (White)Pin 3 - Temperature output 0 V (Blue)Pin 4 - 0 V (Black)

How to order

Dimensions

Türkiye: info@imbelectric.com Tel: +9 212 544 59 59 www.imbelectric.com