How to Record with Panopto for Windows Content in this document from https://support.panopto.com/s/article/basic-recording-1 has been modified for University of Iowa users. See also this tutorial video. Overview

Panopto for Windows Versions

• The current version of the Panopto for Windows is 6.0. Starting in Panopto 7, all client updates can be found in our Recorder Client Updates Forum.

1. Installation & Setup

1.1. Panopto for Windows is very small and very easy to install. It can only be installed on computers using Windows 7, 8.1, or 10 (32 and 64 bit). Your computer should also have a large amount of free drive space to capture your video/recording. You can find the complete installation instructions here: Installing the Windows Recorder. 1.2. Once Panopto is installed, log into your ICON course and click on UICapture on the Course Navigation menu. Click on the Create button at the top of your page. Select Record a New Session (See Figure 1). (Students: if you do not see the Create button, your instructor may need to enable the Assignment folder for the course. )

Figure 1

1.3. Click on Open Panopto to launch the recorder (Fig. 2).

Figure 2 Note: You can also open the Recorder directly from your computer and login.

2. Introductory Tour

2.1. When you first log in to the recorder you will be prompted with three different tours that further explain all of the different areas of the recorder. 2.2. The first tour will go over the 3 steps to recording: (Fig. 3)

• Step 1: Name your recording • Step 2: Choose your sources • Step 3: Start recording

Figure 3 2.3. The second tour will go over the Primary source settings: (Fig. 4)

• Capture computer audio: Use this setting to capture audio from your PC applications • Audio volume: The color bars show the volume of the audio being captured. Too loud or

too quiet? Use the slider to adjust the volume

Figure 4 2.4. The third tour will go over the Secondary source settings: (Fig. 5)

• Video resolution: Controls the size of the video that is captured • Framerate: A higher number of frames per second (fps) that captures results in a

smoother motion • Bitrate: Controls the file size of the resulting video. Larger files are able to capture more

detail

Figure 5 2.5. You can skip the tours and always go back and click on the blue info button to get the

information again (Fig. 6). Figure 6

3. Folders

3.1. Click the drop-down arrow so that you can set the folder where the recording will be saved (Figs. 7 and 8).

Figure 7

Figure 8 3.2. You can have the option to name your video here as well. If you do not name your video, the title will automatically be the date and time it was recorded (Fig. 9).

Figure 9

4. Primary Input

4.1. Primary Audio: Under the Primary Sources, select the drop-down under Audio. Select a microphone that is connected to your computer. You must select a primary audio source for a successful recording (Fig.10).

Figure 10 4.2. Volume bar: After selecting your audio, test your audio by talking in a normal voice to test the volume. You should see a few green bars appear as you talk. If you don't see any or see the red and yellow bars highlighted, adjust the volume by using the slider (Fig. 11).

Figure 11 4.3. Primary Video Source: If you'd like to record a video of a presenter, you can select a primary video source under the Video drop-down. But you do not need to include this if you just want to record audio (Fig. 12).

Figure 12 4.4. Quality Setting: There are three different quality settings available to help you determine what will be best to record a high-quality video (Fig. 13). If you want to learn more about Pantopto for Windows Capture Resolutions, go to our Panopto for Windows documentation.

Standard Quality: Audio Only - 64 kbps Primary Video Resolution - Up to 640x480 Primary Video and Audio - 600 kbps Primary Video, Audio, and Secondary Video (640x480, 10 FPS, 340 kbps) - 1240 kbps High Quality: Audio Only - 96 kbps Primary Video Resolution - Up to 1024x600

Primary Video and Audio - 1000 kbps Primary Video, Audio, and Secondary Video (1024x768, 15 FPS, 1000 kbps) - 3031 kbps Ultra Quality:

Audio Only - 128 kbps Primary Video Resolution - Up to 1280x800 (typically 720p) Primary Video and Audio - 1500 kbps Secondary Video (1920x1080, 19 FPS, 1500 kbps) - 4664 kbps Note: Higher resolutions (1080p) are available when using the custom quality options. Enable custom quality settings under Settings > Advanced Settings; then, select the desired options from the quality menu.

Figure 13 4.5. Custom Quality Setting: You also have the option to control your own quality settings, which you can find documentation for here.

5. Screen Capture and PowerPoint

5.1. Screen Capture: After you have selected your video and audio inputs, you can choose to capture what is displayed on your screen. And you can select the checkbox to preview your screen before recording (Fig. 14).

Figure 14 5.2. You can also add an additional video source here if you have more than one camera plugged into your computer (Fig. 15).

Figure 15 5.3. To adjust screen capture resolution, click the drop-down next to Resolution and choose the resolution you desire. Note: If you select a smaller resolution it will make items on the screen appear larger in the final recording (Fig. 16).

Figure 16 5.4. You can also adjust the fps (frame rate per second) by dragging the sliders (Fig. 17). For a

lot of movement on the screen an fps of 15 is recommended, and for showing a video during screen capture an fps of 30 is recommended. Not selecting a high enough fps can cause the secondary video to appear choppy.

Figure 17 5.5. The kbps (kilobyte per second) will adjust automatically based on the settings for recolution and fps (Fig. 18).

Figure 18 5.6. Click Apply to save changes. 5.7. PowerPoint: You can select a PowerPoint animations if you have once. Note: If your PowerPoint contains any motion on the slide, embedded video in the slide, or someone is annotating over the slide, then screen capture must be selected to be able to capture that content (Fig. 19).

Figure 19 5.8. You can also open a presentation from the recorder. Click on the PowerPoint tab in your secondary sources, then click on Open a Presentation to launch PowerPoint (Fig. 20).

Figure 20 5.9. After you open a presentation, you will be prompted with a selection box asking if you want PowerPoint to start presenting as soon as you click on Record (Fig. 21). Note: In order to properly record PowerPoint presentations, after you have launched PowerPoint, you must have it in full-screen presentation mode.

Figure 21

6. Starting, Stopping, and Pausing

6.1. You can now begin recording. Click on the red RECORD icon. Once your recording has started, that icon will change into PAUSE and STOP (Fig. 22).

Figure 22

6.2. Click STOP to stop the recording. You will have the option to upload the recording or delete it and start again. 6.3. Click the PAUSE button to have a section of your recording automatically edited out. When the recording is paused, Panopto is continuing to record, but that section will be edited out of the final version. You can always get this content back by using the editor. 6.4. Hotkeys: You can use Panopto for Windows hotkeys to start a recording, pause and stop, all with a few keys so you don't need to minimize the content you're recording to click the buttons. Record: F8 Key Pause: F9 Key Stop: F10 Key

7. Recording Status

7.1. Once everything has been recorded and you have stopped your recording, you will be taken to the Manage Recordings page (Fig. 23).

Figure 23

7.2. Offline Recordings are recordings that do not have a folder selected in Panopto, so they are only on your computer. You can select Upload to Server to select a folder and add them to your video library.

7.3. Currently Uploading Recordings will show the video that you just completed and its status.

7.4. Uploaded Recordings will show the recordings that you have already recorded, picked a folder for, and uploaded to the server. If you have access to the video in the library, you can open the video or settings using view, edit, or share. You can also continue recording to the same session by selecting resume. And if you need to make space on your computer, you can delete the local files, as long as you no longer need them.

Note: It is possible to delete recordings. If they have been uploaded already, you can delete local and the recording will still be located on the server. If you delete a recording that has not yet been uploaded, that recording will be lost.

8. Warnings

8.1. There are two different warnings that may appear while you are recording. These are for low audio and low disk space. For example, if your audio isn't working you will see a banner at the top of the recorder and a pop-up on the desktop (Figs. 24 and 25).

Figure 24

Figure 25 8.2. These notifications are to help you resolve the problem so you can go back to recording a high quality video.