how to prepare a dect installation - webinar 2016, english
TRANSCRIPT
Your Host
Markus Ehlers Thomas Kopowski
Welcome
DECT IP specialisation
partner.gigasetpro.com
Specialisation
IP PBX systems
Gigaset pro Product Overview
DECT basestations
DECT handsets
Other devices
N510 IP PRO N720IP PRO N720DM PRO
SL750H PRO R650H PRO
Maxwell 10
S650H PRO
Maxwell basic Maxwell 3
The predecessor of the current DECT handsets are still supported.
These are: SL610H, S510H, R630H
Askozia IP PBX system
IP Desktop phones
The Gigaset N720 DECT IP multicell system
Handover & roaming
LAN
Configuration via web browser
8 calls at once
Total of30 calls
Askozia IP PBX Autoprovisioning
DECT Manager N720 DM PRO
DECT base station N720 IP PRO
1–30 Base stations
Up to 100 handsetsGigaset
handsets
N720 SPK PRO measuring kit
Criteria for an optimum DECT wireless network — cell distance
Synchronisation overlap –65 dBm Handover overlap
3 2
Synchronisation planning
54321Incorrect:
321Correct:
5 levels
3 levels
Criteria for an optimum DECT wireless network — capacity
8X
Base Station
Cell
Overlap area
Hotspot
Criteria for an optimum DECT wireless network — capacity
8X
Large overlap areas
Criteria for an optimum DECT wireless network — capacity
Reception power Evaluation of the quality
- 50 dBm Very good
- 60 dBm Good
- 65 dBm Satisfactory (recommended)
- 70 dBm Sufficient
- 73 dBm Weak, not suitable
- 76 dBm Poor, not suitableReception power Frame quality Evaluation of the quality
- 60 dBm 100% Good
- 60 dBm 99% Satisfactory
- 60 dBm 98% Sufficient
- 60 dBm 97% Weak, not suitable
Criteria for an optimum DECT wireless network — quality
Installation instructions for the base stations
Min. 1.80 m
Min. 0.50 m
Min. 0.50 m
Min. 5-10 mOperating temperature +5° to +40°C
How do you go about measuring for a DECT multicell installation?
Determine the requirements of the telephone network
Draw up an installation plan
Take measurements and log the results
Install the Gigaset pro DECT multicell system
Example of a DECT multicell installation
Determine the requirements of the telephone network
26
2
2
2222
1
1
Determine environmental conditions
Reinforced concrete
Lift
Supply lines
Fire door
Indoor area
Outside area
Tinted glass
Interference factors for DECT
Planning and measuring required!
Loss of range through building materials in comparison with a free wireless field:
Material Loss of range
Glass, wood, untreated Approx. 10%
Wood, treated Approx. 25%
Plasterboard Approx. 27–41%
Brick wall, 10 to 12 cm Approx. 44%
Brick wall, 24 cm Approx. 60%
Aerated concrete wall Approx. 78%
Wired glass wall Approx. 84%
Reinforced concrete ceiling Approx. 75–87%
Metal-coated glass Approx. 75–87%
Take measurement
GF
1st UFA
B
C DEGF7
UF1
UF2
UF3
UF4
UF5UF6
UF7
Determine synchronisation plan
A B C D E F
A X X X X X X
B -60 dBm/100% X X X X X
C -68 dBm/100% -69 dBm/98% X X X X
D -63 dBm/100% -60 dBm/100% -45 dBm/100% X X X
E --- -58 dBm/100% -62 dBm/100% -43 dBm/100% X X
F --- --- --- -73 dBm/98% -63 dBm/100% X
A/2
C/2 F/3
B/2
E/2D/1
Synchronisation level
Measuring the synchronisation field strength
• Signal strength between base stations (synchronisation measurement). • Frame quality between basestations • No active connection
Measuring the wireless coverage
• Signal strength between the base stations and defined measurement points
• With active connection
Value Meaning
-30dBm RSSI value
1 Frequency
04 Slot pair
50H RPN
100 Fr. quality
Enter sequence on the keypad and press the talk key.
N720 DECT IP — synchronisation
Cluster installation
DECT Manager
Cluster 2Cluster 1
LAN
N720 DECT IP — synchronisation
3 2 321
N720 DECT IP — system log
N720 DECT IP — troubleshooting
Gigaset pro Wiki pages
N720 DECT IP — troubleshooting
LEDs on the DECT Manager
N720 DECT IP — troubleshooting
LEDs on the base stations
N720 DECT IP — troubleshooting
Hidden firmware update page
N720 DECT IP — troubleshooting
N720 DECT IP — troubleshooting
Switch handset to metering modeHold down the OFF key to switch off the handset
Hold down keys 1 and 4 and then press the ON key
Enter the five-digit service PIN. Default: 76200
From the Service menu, activate Metering Mode and briefly press the end
call key.
076.5.00.04.100
Frame quality RPN Channel Frequency Field strength
Quit metering mode
Thank you for your attention
Questions? Time to wake up!