BASIC METAL LATHE OPERATION VOL. 1Steve Chellis discusses and demonstrates metal lathe fundamentals. Includes use of dial indicators, center finders, and recommended tools. Includes drawings and chart. DVD #VT-BMLO1-DVD $49.50

BASIC METAL LATHE OPERATIONS VOL. 2 Continuation of the first lathe video. Demonstrates many additional techniques such as: soft chuck jaws usage, how to make springs, gear cutting, use of grinders, collet application and Much More! DVD#VT-BMLO2-DVD $49.50

BASIC MILLING MACHINE OPERATIONSteve Chellis demonstrates and discusses the basic operation of a vertical milling machine. Notes and drawings are included. DVD#VT-BMMO-DVD $49.50

BUILDING THE PM RESEARCH #2 STEAM ENGINEThe Sherline Lathe and Milling machineare used to demonstrate the building of this kit. All major stages are shown with emphasis on setup and logical sequence of steps. DVD #VT-BST2-DVD only $24.95 #VT-BPM2 DVD & #2 steam kit $70.00

Learn Basic Lathe And Milling Machine Operation On DVD

FOR MORE INFORMATION OR TO PLACE AN ORDER CALL TOLL FREE 800-872-6500PAGE 13

TAP & DRILL, DECIMALCONVERSION POCKET CHART

Handy plastic 3-1/2” x 5-3/4” size. Fits neatly into your shirt pocket. Decimal equivalentson one side and tap/drill sizes on the other.

#20413 $1.00

PLASTIC WALL CHART 25” X 21”TAP & DRILL, DECIMAL

CONVERSION#01650 $7.25

MACHINIST’S GUIDE FOR TAPSAll the information for correct tapping work including thread forms anddimensions, fits and limits, hole preparationand size, type of taps, speeds and lubricants, tap sharpening, and trouble shooting hints. #20404 $6.50

MACHINIST’S PRACTICAL GUIDEThe original concept of a pocket size manualcovering a wide variety of practicalinformation for the machinist, toolmaker,engineer and student. This complete 108 page handbook fits handily into shop coats, toolboxes, desk drawers, etc. #20402 $6.50

MACHINISTS’S GUIDE FOR CARBIDE TOOLINGCarbide and its many applications are explained in this handy booklet including Design, Application,Geometrics, Troubleshooting, Speedsand Feeds.#20408 $6.50

PALMGREN LATHE MILLING ATTACHMENTSThese fit on toolpost and are bolted down like a toolholder.

Order # 250V 400VToolpost dia 1¼” 2”Jaw width 2½” 4”Jaw opening 2½” 4”Weight 12 lbs 36 lbsPrice POR POR

HOW-TO DVD’S, DECIMAL CHARTS, MACHINIST GUIDES, BORING HEAD, MOUNTS

SHANKS FOR BORING HEAD#220-1500

Model Type Price220-1508 R-8 $29.50220-1510 1/2” Straight 20.95220-1515 MT-2 Drawbar 44.95

Other Sizes Available

Toolmex Carbide Tipped Boring Bar Sets Stocked in 2 grades: C-6 for steel, C-2 for cast iron

and non-ferrous metals, 9 pc sets1/2” SHANK

Range of overall length - 2-¼ to 4-½ ” Bore Depth - 3/4” to 3.0” Minimum Bore - 5/16”, 7/16”, 9/16”

#6-072-120 C-2 1/2” shank $29.95 #6-076-120 C-6 1/2” shank $29.95

12 PC Needle File SetModel Description Length Price4-130-060 #0 Coarse 6” $10.554-130-062 #2 Medium 6” 8.25

COLTONS FILE CLEANERfrom LUTZ

#382-6980 $8.95 EACH

EASY BORE STRAIGHT SHANK BORING BARSDouble End Combination Style: 45? and 90?

Prices do not include tool bitsBarDia. OAL Model #

Boring Bar Price Bit Dia. Model#Toolbit

PriceEach

1/4” 5” BD1 $12.65 5/32”rnd 700532 $2.255/16” 5” BD2 14.40 3/16”rnd 700316 2.503/8” 6” BD3 15.60 3/16”rnd 700316 2.501/2” 6” BD4 20.40 3/16” sq 5-092-007 1.105/8” 10” BD6 24.00 1/4” sq 5-092-012 1.353/4” 12” BD7 27.60 1/4” sq 5-092-012 1.351” 12” BD9 34.40 5/16” sq 5-092-017 1.65

#BD459 5 pc set includes one each BD1, BD3, BD4, BD6, BD7 $100.00

STANDARD DUTY BORING HEADS

Model Actual Size OAL Boring bar

hole SizeCross

hole dia. Offset Price

220-1500 2” 2-7/16” 1/2” 1/2” 5/8” $99.50Larger Sizes Available

Galvanized SteelMachine Mounts

Dampen vibrations, 3-1/8”diameter, 1-7/16” height, ½”

level adjustment, 5-1/8”overall height, load range 100

to 1110 lbsModel #27001 POR