how to connect a laptop to a dlink router
TRANSCRIPT
How to Connect a Laptop to a D-Link Router
SummeryWithout a D-Link router, you would not be able to create a
wireless Internet connection within your home. Your D-Link router can easily be connected to your laptop, but
for that you will need a cable or DSL modem, which should be provided by your Internet service provider. If
the laptop is directly connected to the router by an Ethernet cable, it will be able to access the Internet via a "hard-wired" connection. Moreover, the D-Link router will allow other computers to connect to the Internet
wirelessly. You can use the following steps for connecting a laptop to your router. If you will face any difficulty while following these steps then dial Dlink support phone number to get an online assistance
from our experts.
Step1Connect the Ethernet cable that was provided with your D-Link router to the back of the D-Link Ethernet port labeled "Internet" and connect the other end of the Ethernet cable into the back of your
cable or DSL modem (also labeled "Internet"). The Ethernet cable is slightly
larger than a telephone cord
Step2 Plug both your D-Link router and cable or DSL modem into the wall outlet. Both units
will have a green indication light letting you know it is powered on and connecting
to the Internet.
Step3Obtain an additional Ethernet cable
(included with your cable modem and D-Link router) and connect it into the port labeled "LAN" on the back of the D-Link router, (choose any of of the four ports
available). Plug the other end of the Ethernet cable into the back of your
laptop's Ethernet port
Step4 Reboot your laptop. Open your web browser, type "192.168.0.1" into the
address bar and press "Enter" on your keyboard. An administration portal will open to access your D-Link router. Type
"admin" for the username, leave the password field blank and click "Login."
Step5Change your D-Link router password when
prompted. Contact your Internet service provider to determine if you are paying for a static IP (Internet protocol) address or a dynamic IP address. IP addresses identify your specific computer and its connection to the Internet. The IP can either remain
the same (static) or change each time you access the Internet (dynamic).
Step6Change the SSID (Service Set Identifier) for
your network (optional). An SSID identifies the name of your wireless
network. Change the name to a unique wireless network ("Joey's network,"
"Tony's garage"). D-Link will ask you to reboot the router, which is done so
automatically through the administration portal. Attempt to access the Internet on
your laptop.
You don’t need to worry in case of any difficulty you can get the
complete Router solutionat Dlink modem support Australia .
Contact us
Dlink Router Helpline Number +(61) 386580446Original source:
http://bit.ly/2eAs0LA