hlv series “lo vac” vacuum dehydrator · 2015. 10. 1. · hlv series “lo-vac” vacuum...

2
HLV Series “Lo-Vac” Vacuum Dehydrator For rapid water removal on all mineral based and synthetic lube oils, including turbine, hydraulic, paper machine, gear, cutting, and heat transfer oils, Morgoil to ISO 680. HLV-1200 HLV-360 Explosion Proof Removes free, emulsified and dissolved water to less than 50ppm. Up to 2% single pass removal rate. Systems custom designed to meet your processing needs ISO codes down to 12/10/7 per ISO 4406:1999 Simple controls for manual or automatic operation NEMA 4 weatherproof or NEMA 7 explosion proof available Modular design for easy monitoring and maintenance Fully pre-piped, pre-wired, factory wet tested for immediate installation Proven reliability backed by more than 82 years of combined design experience Features & Benefits Reliable, low maintenance “Water Miseras standard vacuum source. Water cooled & air cooled condenser options Flow rates from 30 GPH to 3,000 GPH (higher capacities upon request) Optional vacuum pump capacity to 3,000 CFM (higher capacities upon request) Typical operating vacuum pressure range during oil purification from 25 inches HG to 28 inches HG Pre-filter and polishing filter options with a full range of heater capacities Available in a variety of voltages to meet your specific operating Compact H-Framed Design Low vacuum dehydrators with the same outstanding performance as our traditional design with half the footprint. Specifications HENEK Fluid Purity Systems, Inc. • Houston, Texas 77075 • Ph: 713-644-5558 • Fax: 713-943-3213 • www.henekfpscom • sales@henekfps.com 888-910-7543 www.HENEKMFG.com Description Our unique thermal vacuum assisted process safely purifies industrial oils which are contaminated with water, particulates, and gases. Henek’s Lo-Vac units will degas, dehydrate, and cleanse all types of lubricating and hydraulic oils quickly and easily to a safe operational standard reducing costly failures due to contaminated oil. With the higher cost of oils and ever increasing environmental regulation/liability, and manpower constraints, it is no longer economical to replace your lubricating, turbine, and hydraulic oils when contamination occurs. Restoring these oils to their original strength through purification is more economical and most beneficial to “in service” machinery. Our HLV Series of Low Vacuum (LoVac) Oil Purification Systems are designed specifically to meet the operational, economical, and environmental needs for purifying lubricating oils. HENEK’s Lo-Vac Systems can be used as stationary units or portable with casters. Systems also custom manufactured within a variety of trailer configurations to be completely portable or selfcontained. Water Miser illustrated in gray color

Upload: others

Post on 29-Aug-2020

2 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: HLV Series “Lo Vac” Vacuum Dehydrator · 2015. 10. 1. · HLV Series “Lo-Vac” Vacuum Dehydrator For rapid water removal on all mineral based and synthetic lube oils, including

HLV Series “Lo-Vac” Vacuum Dehydrator

For rapid water removal on all mineral based and synthetic lube oils, including turbine,

hydraulic, paper machine, gear, cutting, and heat transfer oils, Morgoil to ISO 680.

HLV-1200

HLV-360 Explosion Proof

•Removes free, emulsified and

dissolved water to less than 50ppm.

Up to 2% single pass removal rate.

•Systems custom designed to meet

your processing needs

•ISO codes down to 12/10/7 per ISO

4406:1999

•Simple controls for manual or

automatic operation

•NEMA 4 weatherproof or NEMA 7

explosion proof available

•Modular design for easy monitoring

and maintenance

•Fully pre-piped, pre-wired, factory

wet tested for immediate installation

•Proven reliability backed by more

than 82 years of combined design

experience

Features & Benefits

•Reliable, low maintenance “Water

Miser” as standard vacuum source. Water cooled & air cooled condenser options

•Flow rates from 30 GPH to 3,000

GPH (higher capacities upon request)

•Optional vacuum pump capacity to

3,000 CFM (higher capacities upon request)

•Typical operating vacuum pressure

range during oil purification from 25 inches HG to 28 inches HG

•Pre-filter and polishing filter options

with a full range of heater capacities

•Available in a variety of voltages to

meet your specific operating

Compact H-Framed Design

Low vacuum dehydrators with the same outstanding performance as our traditional design with half the footprint.

Specifications

HENEK Fluid Purity Systems, Inc. • Houston, Texas 77075 • Ph: 713-644-5558 • Fax: 713-943-3213 • www.henekfpscom • [email protected]

888-910-7543

www.HENEKMFG.com

Description

Our unique thermal vacuum assisted process safely purifies

industrial oils which are contaminated with water, particulates,

and gases. Henek’s Lo-Vac units will degas, dehydrate, and

cleanse all types of lubricating and hydraulic oils quickly and

easily to a safe operational standard reducing costly failures due

to contaminated oil.

With the higher cost of oils and ever increasing environmental

regulation/liability, and manpower constraints, it is no longer

economical to replace your lubricating, turbine, and hydraulic oils

when contamination occurs. Restoring these oils to their original

strength through purification is more economical and most beneficial

to “in service” machinery. Our HLV Series of Low Vacuum (LoVac)

Oil Purification Systems are designed specifically to meet the

operational, economical, and environmental needs for purifying

lubricating oils.

HENEK’s Lo-Vac Systems can be used as stationary units or

portable with casters. Systems also custom manufactured within a

variety of trailer configurations to be completely portable or

selfcontained.

Water Miser illustrated in gray color

Page 2: HLV Series “Lo Vac” Vacuum Dehydrator · 2015. 10. 1. · HLV Series “Lo-Vac” Vacuum Dehydrator For rapid water removal on all mineral based and synthetic lube oils, including

HENEK HLV SERIES CHART STANDARD SPECIFICATIONS

WEIGHTS AND DIMENSIONS

Skid Sizes Vary with Options

Unit comes standard with our proprietary Water Miser Vacuum System™. Vacuum pump options are available. Water cooled & Air

Cooled

All Power calculations are for 480 Volts, 3 Phase, 50/60 HZ.

MODEL NO. & FLOW GPH HLV-60 HLV-120 HLV-360 HLV-600 HLV-900 HLV-1200 HLV-1800 HLV-2400

Heater capacity KW 6 12 16 32 48 64 96 128

Total Power Required AMPS 15 20 30 45 70 90 130 175

Motor, HP, Oil Discharge Pump 1/3 1/3 1 1 2 2 3 3

Quantity Coalescers HC-3135 1 2 5 10 12 14 20 24

Oil Discharge Pressure Range Adjustable Standard Unit Range ————— ————— ————— ————— —————-

MODEL NO. HLV-60 HLV-120 HLV-360 HLV-600 HLV-900 HLV-1200 HLV-1800 HLV-2400

Oil Inlet size NPT 1/2 3/4 1 1 1/2 1 1/2 1 1/2 2 2

Oil Outlet Size NPT 1/2 1/2 3/4 1 1 1/2 1 1/2 2 2

Coolant Line Size NPT (Air cooled optional)

1/2 1/2 1/2 1/2 1/2 1/2 1 1

Approximate Height 81 81 84 84 84 84 84 94

Approximate Length 72 72 72 72 72 72 96 180

Approximate Width 48 48 48 48 48 48 60 72

Approximate Weight 1350 1350 3750 3850 4250 4350 Consult Factory

SIGNIFICANT NUMBERING SYSTEM - Notes

- The Model Number identifies these major “Characteristics” and separates them with a dash mark for clarity.

- Use the chart below to identify your specific HENEK Low Vacuum Purifier

HLV - Series Major Characteristics Identification

Product Series - Flow (US GPH) - Vacuum System - Electrical Enclosure - Heat (KW) - Options - Options - Options

HLV 600 W W 32 XX - XX - XX

See Chart W= Water Miser System ™

W= Weather Proof See Chart List Options Alphabetically

A= Water Ejector X = Explosion Proof

C= Vacuum Pump

L=Liquid Ring Vacuum Pump

HENEK • Houston, Texas 77075 • Ph: 713-943-7543 • Fax: 713-943-3213 • www.henekmfg.com • [email protected]

HLVR12121201