himss15 pharmacy script 4/2015 - intelligent...

DRAFT ::: document.docx

HIMSS15 Pharmacy Script 4/2015

ContentsHIMSS15 Pharmacy Script 4/2015.................................................................................................1

Introduction...................................................................................................................................3

1-Main Pharmacy Part 1.............................................................................................................3

1.1_ID badge authentication (HID.1)~....................................................................................3

1.2_Alaris Infusion Viewer (Carefusion.1)..............................................................................3

1.3_networking infrastructure (Extreme Networks.1)~..........................................................4

1.4_Central Controlled Substance Storage (AutoVault Mini & Autocool – Talyst.1)..............4

1.5_ADC Replenishment (AutoCarousel Mini – Talyst.2)........................................................5

1.6_Temp monitoring (Arista.1)~...........................................................................................6

2-Sterile Compounding Room....................................................................................................7

2.1_Compounding (Talyst.3)~.................................................................................................7

2.2_labeling (Zebra.1)~...........................................................................................................7

2.3_Real Time Status View of IVs for Pharmacy (BBraun.1)~.................................................7

2.4_TPN Compounding (BBraun.2)~.......................................................................................8

2.5_ Optimized IV Compounding (Carefusion.2)....................................................................9

3-Main Pharmacy Part 2...........................................................................................................10

3.1_ Medication Tracking and Delivery (CareFusion)...........................................................10

3.2_Video Visit (Skylight.1)~.................................................................................................10

4-Outpatient Pharmacy............................................................................................................11

4.1_E-prescribing (HID.2)~~..................................................................................................11

4.2_M5000 Robot (Omnicell.1)............................................................................................12

4.3_retail security (Cbord.1).................................................................................................13

4.4_Medication Compliance (eMedonline.1).......................................................................14

Conclusion................................................................................................................................15

Appendices.................................................................................................................................. 16

Page | 1


A-Setup procedures for Next Tour...........................................................................................16

B-Sample Labels to be Printed.................................................................................................16

C. Map of Room (not to scale)..................................................................................................17

D-Furniture & Fixtures To Obtain.............................................................................................18

E-Furniture & Props:.................................................................................................................19

Page | 2


[any text in blue or red will not be SPOKEN in the script, red text is for actor performance, blue text is for organizing/structuring the script, green is directorial for the voice. This script requires a minimum of 5 actors:

1. Central pharmacya. tech (Actor 1)b. pharmacist (Actor 2)

Introduction [Prop Listi]

Hello, welcome to the Intelligent Hospital Pharmacy. In this demonstration you’ll see a Pharmacy staffed with pharmacists and pharmacy technicians perform important and complex tasks and see examples of technology improving efficiency and accuracy to help ensure the 5 Rights of medication safety are made possible <brief pause> the right medication, to the right patient, at the right time, via the right route, and at the right dose.

[Slide: _________]

1-Main Pharmacy Part 1

1.1_ID badge authentication (HID.1)~ {Suggest leveraging this quick use case to increase awareness of increased cyber security in every demo room where a tablet is being used}.

[Hardware: NFC Tablet, Mobile Phone, ID Badge]

[Actor #1: Picks up/ Holds out the Tablet]

We begin our tour in the pharmacy by demonstrating the importance of security in this ever increasing world of mobility. To address this issue, the intelligent pharmacy employs <emphasis> two factor authentication to log in to any systems and application.

[Slide 1: Screen shot of ActivID Tap Application]

[Actor #1: Enters there reduced complexity domain password and then Taps their ID Badge to the back of the Tablet for a second factor]

With a single tap of this smart identification card, the innovative technology inside the card both generates and transmits a One-Time- password without the inconvenience of re-keying. Elevated security that’s efficient is a must-have in the environment of care and because this card is ‘bound’ to the device, should a user lose their card, there’s never a risk of someone else being able use it to access any of the pharmacy applications.

[Slide 1: Screen shot of Authentication]

1.2_Alaris Infusion Viewer (Carefusion.1 ) [Hardware: ______________]

Page | 3

Shannon John Johnson, 03/05/15,

QuestionsArista fridge? Don’t need now, we can use Talyst autocoolExtreme Networks. this is just a standard para about networking infrastructure - will get it for you


This is in direct competition to Brauns viewer; the use case focus here is dosing limits, unlike Braun which can be around iv productions


What does bound mean?


Is re-keying the same as “typing” ?


[Props: ______________]

[Slides: ______________]

Pharmacists can now view near real-time infusion status data for all large volume and syringe infusions administered throughout their hospital or health system. Using information provided by this infusion viewer, Pharmacists can make timely, informed decisions to improve medication safety, as well as infusion preparation and management.

[Pharmacist Actor comes back to computer workstation / power-point Screenshots of Infusion Viewer displayed on screen]

For example, shortly after an infusion begins anywhere in the hospital, the IV pump will communicate wirelessly to a central server that will update the “Infusion Viewer” you see here on the monitors.

From this web-based dashboard, the pharmacist now has visibility to patient-specific infusion data, due to the dashboard’s integration with the hospital’s Admission, Discharge, and Transfer system (or ADT). This helps the pharmacist by providing key patient demographic and location information, such as patient name and room number, to each infusion that is currently being administered. In addition, the dashboard clearly identifies all infusions that are violating a safety software “soft” limit and the violation that occurred, as well as identifies those infusions that are not being protected by dose error reduction software at all, which show up as “Unknown” in the Infusion drug name column.

[Pharmacist Actor points to yellow G badge in the Infusion Name column, as well as an infusion with the name ‘Unknown’ in the same column]

This gives the pharmacist the opportunity to review the current dose, rate, concentration, and duration of running infusions - as well as review overall safety software compliance – to help identify potential medication errors and ensure optimal care coordination between both Nursing and Pharmacy.

1.3_networking infrastructure (Extreme Networks.1)~ [____________________]

[Slide 1]

< insert copy about networking infrastructure >

1.4_Central Controlled Substance Storage (AutoVault Mini & Autocool – Talyst.1) [Pharmacist 1: Selects an item from the pick queue using the mouse to select. A label prints from the barcode printer. The appropriate AutoVAULT door opens (this could be an AutoVAULT door or a door on the refrigerated AutoCool +H (Helmer). Validates the picking location. Picks the appropriate number of items from the bin. Scans the barcode of the item. Attaches the label to the product. May or may not perform blind cycle count]

[Slide 1]

Page | 4

John Johnson, 03/10/15,

Anne to send blurb


As just demonstrated with medications picked from pharmacy shelving for remote ADC replenishment, the same concept applies to the replenishment of refrigerated or non-refrigerated medications that require computer controlled storage. Orders for remote pharmacies, satellite pharmacies, outpatient clinics and specialty clinics can be automatically queued up from the pharmacy system. A controlled access vault or locking refrigerator like this uses barcode scanning to ensure control and recording of every transaction into and out of these controlled access devices.

[Slide 2]

For this demonstration, the technician selects an item for picking. The appropriate door is unlocked, the technician scans the item to confirm the right medication is picked and the door is then re-locked. All transactions, including user access are recorded, the inventory is updated, labels are printed, and the picking can continue.

[Slide 3]

With the integration to a perpetual inventory system and remotely located ADC's, workflows can be automated to help manage the restocking of controlled medications and ensure closed loop replenishment while documenting chain-of-custody at each step of the way.

[Slide 4]

And in the case of dealing with a controlled substance like morphine or vicodin, if a discrepancy were to occur signifying potential diversion, the investigation into the reason can easily occur to ensure an appropriate and accurate resolution.

1.5_ADC Replenishment (AutoCarousel Mini – Talyst.2) [PHARMACIST 2: Technician signs into AutoPharm.]

[Slide 1]

Automated dispensing cabinets, or ADC’s for short, located throughout the hospital need frequent refilling. Just like the refill process being done at the Central Pharmacy for the fast movers, this pharmacy also refills the ADC’s and the focus here is on refiling the slow-movers and specialty medications that the Central pharmacy didn’t carry.

[Slide 2]

For the sake of this demonstration….

[PHARMACIST 2 starts the picking process – replenishment for Pyxis order. The AutoCarousel spins to the proper location and the tic-bar lights up to identify the location of the bin to pick the item. Barcode prints. Technician picks and scans the item to insure the proper medication. The technician packs and labels medication.]

[Slide 3]

Page | 5


…we are utilizing an automated mini carousel that is more typical in small environments. Larger carousels can be seen on the main floor of the show.

[Slide 4]

Additionally, medications and components to support pharmacy workflows such as IV compounding and kitting can also be handled here for storage and picking.

[Video: show 15 second video without sound]

[actor: interacting with carousel, showing light to pick, barcode scanning]

High-density storage systems like these can be configured with multiple widths, depths, and heights, depending on the physical constraints of your pharmacy and the work activities that you perform. Integrated with an enterprise wide perpetual inventory system, all orders can be queued for an efficient workflow. Once the technician selects the order, the AutoCarousel will spin to the designated location, the light will light up on the correct bin from which the technician will pick the medication from. The technician uses the medical grade barcode scanner to scan the product and the label to confirm the proper item is picked. The carousel is then ready to rotate to the next pick, and the sequence starts again.

With an automated carousel like this, pharmacy stock can be stored in the carousel for better inventory management & tracking with the intent of keeping just-in-time inventory on hand, thereby preventing stock outs while avoiding overstocking. This carousel can be used to send patient specific first-doses and receives refill data from an ADC if ever there’s a stock out needing immediate attention. The system will also send order recommendations to the pharmacy buyer which will then be sent to the wholesale distributor, ensuring this machine has the desired “just in time” inventory at all times.

1.6_Temp monitoring (Arista.1)~ [Hardware: put module on Talyst autocool]

[Props: ______________]

[Slides: actor can receive an alert that temperature or humidity has deviated within the room or within an asset and go to the screenshot for dashboard notifications]

Real Time monitoring of room/refrigerator/freezer/deep freezer environmental conditions with real time display of data via dashboards and other user interfaces. The temperature tags utilize existing Wi-Fi infrastructure to transmit the data for storing and processing. Alerting of abnormal conditions is achieved via email, SMS or other API.

Page | 6


refer to temp on autocool fridge; need copy from them


###transition1 from main room to IV Compounding room

We will now shift your attention to the compounding area to your right. This area represents a clean-room area designed to adhere to USP797 standards for anticipatory batch compounding of sterile preparations for the entire health-system.

2-Sterile Compounding Room

2.1_Compounding (Talyst.3)~ [Props: ______________]

[Slides: ______________]

The next solution you see is aimed at streamlining sterile and non-sterile compounding within your pharmacy. This solution provides a process for medication preparation, verification and inventory management, all bar coded to manage complex multicomponent orders for the IV Room compounding needs. This module offers a preparation, verification, and check software component to your compounding areas while also tying into the inventory management and reporting capabilities of. It can be used in your inpatient pharmacy or satellite compounding locations and can be integrated to existing compounding solutions.

###transition2 from main IV Compounding room to Patient Care Area

We will now shift your attention from the compounding area to the monitors.

2.2_labeling (Zebra.1)~ [Technician 1 holds a zebra scanner and interacts with a printer or print label; presses scanner button and outputs a label from a zebra printer, applies to a medication, and then scans the medication to note when the meds were prepared. ]

[slide ##]

The use of barcode scanning is very important throughout the intelligent hospital. Many different processes rely on barcode scanning to help ensure accuracy and simplify documentation. To achieve accuracy and efficiency, scanners need barcodes printed clearly with a high degree resolution. And when working inside a clean room like this, it is especially important that barcode scanners and printers are produced with medical grade plastics to ensure a clean and sterile pharmacy environment and use power supplies built specifically for hospital environments.

2.3_Real Time Status View of IVs for Pharmacy (BBraun.1 ) ~ [Hardware: ______________]

[Props: ______________]

The pharmacist working here in this IV Room has a special system that provides us with real-time infusion information on when IVs are due for our patients.

Page | 7


This is in direct competition to Alaris viewer; the use case focus here is around IV production, unlike Alaris which can be around dosing limits


might want to beef this up, expand this a lot.


[Slide 1; TECH 2 point to last column with colors]

As you can see the color coding provides a quick visual as to what needs to be worked on first, allowing staff to anticipate what’s needed before the patient runs out. And because it ignores things like Piggybacks or Boluses, this system doesn’t direct staff to produce something that isn’t actually needed.

[Slide 2: Actor points to Time Thresholds on monitor]

This screen allows staff set preferred time thresholds to better achieve “just in time” production which will decrease waste. Warnings set for 30 minutes and less will appear in red. Reminders for 60 minutes and less, will appear in yellow. This approach allows you to proactively prepare IVs before they’re due the patient.

[Slide 3; actor point to last column with red colors]

As you can tell by the red indications on this screen, there are a lot of IVs now due. In a busy hospital it can be frustrating receiving phones calls from nursing asking for their IVs that about to run out. That will not happen with this system. Pharmacy technicians also appreciate not having to perform IV rounds anymore, allowing them to focus on more important duties.

2.4_TPN Compounding (BBraun.2)~ [Hardware: Jessica Pitt will again work with GermFree for a hood]

[Props: ______________]

[Slides: ______________]

[Technician #: garbed and gowned inside the compounding lab area, holds up label]

We will now show you another system that helps manage the production of “total parenteral nutrition”, also known as TPN. The set-up of the hood and compounder is a critical process. The hood cleaning has been documented, and this compounding pump has been accurately calibrated. The ingredients have also been hung inside the hoodii and connected to the compounder using this bar-code scanner. Because an accidental swap of the tubing is an easy mistake to make, this scanning step verifies the correct ingredients are hanging on the correct tubing line and helps ensure a proper line tracing is done for each connection. And with barcode scanning, the system will also capture the lot number and expiration date directly from the barcode to eliminate the need for manual transcription or data entry and will even alert the user if something is expirediii.

[Technician 1: hangs ingredients, scanning the bar codes on the lines of the transfer set and the corresponding source containers. Then holds up empty 2-liter bag with barcode label, scans the bar code, then presses the “Start” button on the compounder]

Page | 8


The pharmacist has just received electronic orders for a pediatric TPN. A patient specific bar-coded label has been printed and placed on the empty bag. With one simple scan of this patient specific label, the pump is queued with the exact formula that was ordered by the pediatrician, eliminating any opportunity for error with manual data-entry. All that’s left to do now is press START on the compounder and wait for the pumping to finish.

<brief pause>

Upon completion of pumping, the technician takes the completed bag off of the compounder and readies it for delivery to the pediatric wing across town. Later, we will see how an order like this is actually generated at the bedside using a tablet computer.

2.5_ Optimized IV Compounding (Carefusion.2) IV compounding isn’t complete once the IV has been compounded. Currently, most Pharmacies lack the visibility…

[Slide: CareFusion_Pharmacy2.5_visibility.png]

…into where the IV is going, was it used, what to do if it returns and can it be re-used?

[Screen shot: (1) questions asked bubble]

Through technology,…

[Slide: CareFusion_Pharmacy2.5_technology.jpg]

…patient specific medication can be tracked from the pharmacy to any patient care area.

[Screen shot: (2) Track/delivery screen]

When a patient specific IV is not administered because the IV orders have changed, been discontinued or the patient has been discharged, the medication can be returned to pharmacy. This results in thousands, if not millions for some health systems, of dollars going down the drain. This technology helps manage…

[Slide: CareFusion_Pharmacy2.5_manage.png]

[Actor points to monitor showing screen shot]

…unused IV medications returned to the pharmacy by storing them as inventory. If an identical IV medication is requested before its expiration date, the software will notify the technician of the already-existing IV medication and allow re-issue. If the medication is not usable, it can be appropriately documented and discarded as waste.

[Screen shot: (3) Pyxis Prep waste/return screen]

Page | 9


Confused, what slide is this?


Confused, how does this relate to technology slide?


Confused, how does this relate to visibility slide?


With changing state board of pharmacy requirements and increased need for documentation, consider technology that provides a log…

[Slide: CareFusion_Pharmacy2.5_log.png]

[Actor points to monitor showing screen shot]

…with detailed information on all IV preparations compounded for administration to patients. Information captured includes complete IV preparation process: pick, prep, check and final check information. In addition, reports include the NDC, Lot # and expiration information. The latter is critical in managing recalled medications.

[Screen shot: (4) Pyxis Prep Status Log]

3-Main Pharmacy Part 2

3.1_ Medication Tracking and Delivery (CareFusion) In your typical pharmacy, the phones would be ringing non-stop! Here, there are no phone calls from Nursing down to Pharmacy for missing medications, thanks to a delivery system that uses barcodes to track and verify the delivery of medications to patient care areas.

[Actor: Show outbox full of medications ready to be delivered. Technician scans meds with handheld.]

When medications – like the IV that was just compounded and checked – are ready to leave the pharmacy, a technician simply scans…

[Slide CareFusion_Pharmacy3.1_scans.bmp]

…the meds ready for transport and a delivery list is automatically …

[Slide CareFusion_Pharmacy3.1_automatically.bmp]

…created, prioritized by order urgency.

[Screen shot: (1) Close up of handheld screen: Med scan, (2) then prioritized delivery list.]

They are now ready to head out the door… and Pharmacy management can review…

[Slide #: CareFusion_Pharmacy3.1_review.bmp]

…the status of all deliveries to help manage workflow and respond to Nursing if they do call.

[Screen shot: (3) Pyxis Enterprise Server Med Delivery tracking view.]

3.2_Video Visit (Skylight.1)~ [Hardware: ______________]

[Props: ______________]

Page | 10


What does this mean?


What does this mean?


Can we get an image of this?


Confused, what slide is this?


[Slides: ______________]

This interactive video visit system connects patients with people outside their room including family, friends, physicians and even the pharmacist. The HIPAA-compliant videoconference platform is the ideal tool to deliver a better patient experience while saving time for the hospital staff. While _____Interactive allows the patient to get prescriptions filled prior to discharge the Video Visit component allows the pharmacist to do a consultation for medication information and instructions via videoconference, creating better adherence to medication regimens, enhanced care coordination, and better prepared for transition of care.

###transition2 from main Patient Care Area to Outpatient Pharmacy

We will now shift your attention to outpatient pharmacy area to your left. This area represents a community pharmacy services operation where medications are being provided to patients, employees and walk in customers.

4-Outpatient Pharmacy

4.1_E-prescribing (HID.2)~~ [Hardware: PC/ workstation/ computer, ID Badge with contact chip and One Time Password generator, Desktop reader, Desktop bio sensor]

[Slide 1: Screen shot: Authentication session of an e-Prescribing E H R session]

[Actor#1: Sitting at a desk or counter to input the prescription electronically]

This busy pharmacy receives prescriptions for all types of medications and from anywhere throughout the medical system and surrounding community. And fewer and fewer prescriptions these days are being written on paper, rather they are being received electronically from electronic ordering systems. This intelligent hospital employs a system that enables physicians to prescribe controlled substances electronically right from the hospitals electronic medical record. This might sound straight forward, but because the DEA requirements to write an electronic prescription for a controlled substance require two factors of authentication to be established, the intelligent hospital uses a system that seamlessly integrates into the EMR and allows the prescriber to authenticate his or her identity in one of 3 ways:

[Actor#1: Holds up ID Badge, inserts it into desktop reader, types four digit PIN 1234]

The first way allows the prescriber to insert their ID credential for presentation of their digital certificate, and then they type in their personal PIN number.

[Slide 2: Screen shot: Identity accepted]

Page | 11


This needs to be re-written….


The second method, the prescriber can initiate a One-Time-Password from the certified credential, types in six numbers. 123456

[Actor#1: Holds up ID Badge, types six digit PIN 123456]


And lastly, the third option for authentication allows the prescriber to a use a biometric identifier like a fingerprint to matches the prescriber to their profile.

[Actor#1: Holds places index finger on the sensor]


[Slide 5: Prescription successfully sent to the Pharmacy]

And because any one of these three authentication methods meets the DEA requirement for authentication, users can choose their preferred authentication method to electronically prescribe medications right from their computer desktop.

4.2_M5000 Robot (Omnicell.1) [Hardware: The dimensions of the robot are 30 inches wide x 35 inches deep x 80 inches high and weighs 1000 pounds. The robot must be lifted and moved by forklift.The robot should be located near an air source against a wall if possible.]

We now shift your attention to this machine. Medication adherence and its role in readmissions is getting much attention as health care reform shifts the way services are measured and reimbursed. Providing…

[Video: 1:40-1:53]

…patients with medication adherence packaging is one proven way to address this issue. Multiple medication adherence blister cards are designed to improve patient adherence by clearly organizing and labeling medications by time of day, and day of the week, making it easy to know what to take and when.

[Video: :36- :47]

It takes time and resources for the pharmacy to prepare such cards. But now there’s an easier way. This robot here is the first pharmacy automation system that fully automates the fulfillment of these multiple medication adherence blister cards.

[NO VIDEO JUST PAUSE ON IMAGE OF M5000]

What you are seeing here is a demonstration of its integrated vision system. This is just one of the featured technologies that help verify the correct pills are being selected by the pick and place robot. As you can see here, the robot is selecting and sorting the pills by color.

Page | 12


This doesn’t make sense as written, please elaborate.


[Video 00:44-1:04]

The visioning system reads the size and shape of the pill and matches it to the NDC profile in the machine’s software. This is just one of features that audit the medication from the time it’s entered into a cassette until it leaves the machine in a filled, sealed, and labeled card.

4.3_retail security (Cbord.1) [Hardware: ______________]

[Props: ______________]

Every retail environment needs to keep close tabs on what is happening at the registers.

[Actor: holds up ID badge]

[slide 1]

This employee recently used their intelligent hospital identification badge to pay for her medication, a magazine, and a snack. While reviewing the receipt that was emailed to her after the transaction, she noticed she was overcharged

[Actor: Employee points to monitor showing screen shot of transaction history on phone in GET]

[slide 2]

Luckily, we have a full audit trail and surveillance of the transaction just a few clicks away.

[slide ##: Monitor shows FSD at computer querying transaction in POS Video Security]

After a quick search, a manager brings up video footage…

[slide 3]

…and a receipt for the transaction. Here you can see…

[slide 4]

…that she indeed only purchased one magazine, but…

[slide 5 – animation accentuates different parts of the screen shot]]

…the receipt shows two. The manager corrects the situation and credits her for the error. A cashless system with point-of-sale surveillance allows you to manage retail activity with tight security controls in place.

Page | 13


4.4_Medication Compliance (eMedonline.1) [Actor #1: Pharmacist looks at the desktop monitor to review the patient’s medication compliance record. Then walks over to the patient waiting to pick up his meds. They both check the patient record on the phone screen. (See Actor #2).]

[Actor #2: A patient waits at the counter, ready to pick up his medications. He is holding a smartphone with a medication compliance app on the screen showing his compliance history or body map or list of meds.]

[Props: Desktop monitor showing screen shot of clinical interface (depicted in Slide #2 and/or #3). Smartphone with a medication compliance app on the screen showing his compliance history or body map or list of meds (eMed can provide prop).]

Today, the Intelligent Pharmacy goes beyond the walls of the pharmacy or hospital by managing medication compliance for outpatients in the ambulatory and home setting.

[Slide 1: medication management platform]

Smartphones connect any medication event – pill, injection, inhaler, eyedrops – seamlessly to the pharmacy information system, an electronic medical record, or care management system, delivering codified, actionable data to the right place at the right time.

[Slide 2: Screen shot of patient medication compliance record]

These new digital platforms engage patients in self-efficacy and give the pharmacist an unprecedented view into the patient’s longitudinal care. Server based software delivers codified adherence and outcomes data

[Slide 2.1: animation fades in from Slide 2 to reveal the popup window depicted in the screen shot]

…in structured format that facilitates interoperability throughout the healthcare system.

[Slide 3: Screen shot of NLP showing codified outcomes data]

Natural language processing is used to capture and codify symptoms and side effects in addition to the compliance data collected. This aggregate data can be mined to assess drug use and distribution, track supply chain of custody, identify adverse effects specific to a given indication, and compare drugs in a therapeutic class or formulation.

[Slide 4: Depiction of longitudinal care with actionable, codified data]

Such end-to-end solutions create a 24/7 touchpoint between the patient and prescription, make it easy to follow the prescribed therapy, and establish a positive relationship between the patient and the pharmacy. They can be used to manage transitional care, chronic disease, and aging-in-place patients. To date, they have been shown to be effective in reducing hospital admissions, in managing high-risk cancer and chronic disease populations, and in high-cost specialty pharmacy applications.

Page | 14


Conclusion This concludes this demonstration of the Pharmacy within the intelligent hospital pavilion. You’ve just seen how the integration of many different technologies can enhance patient care and safety, optimize staff workflow, and assist in management of pharmacy inventory. Please visit the other rooms in the Intelligent Hospital™ and visit our sponsors in the Pavilion kiosks to learn more about these dynamic technologies. And for more information about any of the technologies you’ve seen, pick up a copy of the Intelligent Hospital Handbook. Thank you.

Page | 15


Appendices

A-Setup procedures for Next Tour 1. Put props back to original location2. Reset movie to beginning

B-Sample Labels to be Printed

1) Scan events – Track & Delivera. Pharmacyb. Nursing Unit

Page | 16


C. Map of Room (not to scale) 0

Sign

age

Ven

dor E

quip

men

tIh

p eq

uipm

ent

Col

or K

ey

mon

itors

door

25 feet

20 feet

To the or à

Emerson long Wall fixture74" wide

25.25"deep

Emerson short Wall fixture50" wide

25.25"deep

Emerson long Wall fixture74" wide

25.25"deep

Emerson short Wall fixture50" wide

25.25"deep

TPN Compounder & HoodBraun

73” W x 34” D x 49 ½” H

Sterile Compounding Room

OmnicellM5000 30 inches wide x 35

inches deep x 80 inches high and

weighs 1000 pound

Inpa

tient

Pha

rmac

y

Floo

r mou

nted

50"

m

onito

r #1

(kne

e he

ight

)

Stand mounted 50" monitor #2

(head height)

AutoVault Mini

Talyst41.13"H x 52"W

x 29"D

Power: 120 VAC, 12 VD

C Supply (AutoVault), 110V

(computer)

AutoC

ool + H

Talyst79.5"H

x 29.5W x 32.5 D

Pow

er: 115 VA

C 7.5A

1-P

hase, 110V (com

puter)

AutoC

arousel Mini

Talyst78"H

x 82"W x 49.5"D

table for workstation next

to Carousel39"H x 28.5" W x 30.5"D

Island – need to make this

48" wide

30"deep

CBORD register

Floor mounted 50" monitor #1

(knee height)

Kitt

ing

&

Com

poun

ding

Taly

stW

orks

tatio

n on

tabl

e on

ly

39"H

x 2

8.5"

W x

30.

5"D

Pow

er: 1

10 V

(com

pute

r)

Pharmogistics /

Carefusion

Outpatient Pharmacy

Talyst to provide table

Wall graphic overlay

pwr

pwr

pwr

pwr

pwr

pwr

pwr

pwr

Air compressor for m5000

pwr

pwr

Page | 17

DRAFT ::: document.docxD-Furniture & Fixtures To Obtain

1. Outbox with meds for Carefusion

Page | 18


E-Furniture & Props:

Page | 19

i PROPS: Drugs (JJ); empty vials, Syringes, big, small, Supplies: Baggies, Counting tray?, Labels with barcodes, sharps container, Equipment (JJ) - graphics / postersii

iii

himss15 pharmacy script 4/2015 - intelligent...

Documents