NovelisAerospace Aluminum Solutions

High performance rolled plate and sheet

About Novelis AerospaceWith more than 55 years of experience and know-how, we serve a variety of end-use industries, and are among the world’s leading suppliers of high-quality aluminum rolled products to the aerospace industry.

We specialize in the production of rolled aluminum plate and sheet materials for fuselage and wing structure components according to standard or customized specifications.

Novelis is helping our customers meet regional demand through two aerospace industry certified plants in Koblenz, Germany and Zhenjiang, China.

Novelis supplies the global aerospace industry with advanced aluminum materials of the highest quality, which meet not only the industry’s high standards but also all conceivable individual customer specifications.

NOVELIS’ ADVANTAGES AND CAPABILITIES INCLUDE

• Broad standard and advanced alloy portfolio

• Plate and sheet in a broad dimensional range

• Specialties: ultra-thick plates, extremely wide sheets, wing plates• Local production in Asia and Europe• Value added services: contour sawing,

pre-cutting/machining, drilling, sheet polishing, closed loop recycling

Zhenjiang,China

Koblenz,Germany

Global presence to enable efficient supply chains

Two aerospace sites –global supply chain – local for local

From its Koblenz facility, Novelis offers a broad range of aerospace sheet alloys and specifications, including wide sheets and further fabrication such as polished sheets.

High quality standards combined with unique state-of-the-art capabilities enables Novelis to provide:

• Broad portfolio (dimensions and alloys)• Excellent surface properties (mill finished, bare, one side

clad, both sides clad, polished skin quality)

• High formability• Best chemical milling quality• Minimum residual stress-quality

(MRS)

Dimensional capabilities sheetThickness 0.032” – 0.472” 0.8–12.00 mm

Width up to 136” up to 3,460 mm

Length up to 590” up to 15,000 mm

Other dimensions on request

2014

AMS 4029BS 2 L.93DMS 1580TH 5.313

2024

AIMS 03-02-004 AIMS 03-02-020ABM 1-1005AIR 9048AMS 4035AMS 4037AMS 4041AMS 4462AMS-QQ-A-250/4AMS-QQ-A-250/5ASN-A3011BS 2 L.97BS 2 L.98CMS-AL-103DGQT 1.1.0.0036DAN 422EN 2419MEP02-035SMS 3204TH 5.312WL 3.1354YS-X-9001

2024 ALCLAD

AIMS 03-04-009AIMS 03-04-010AIMS 03-04-011AIMS 03-04-012AIMS 03-04-013AIMS 03-04-014AIMS 03-04-037AMS 4040AMS 4041AMS 4461AMS-QQ-A-250/5BAMS 516-026SMS 3200TH 33.0173YS-X-9001

2124

AIMS 03-02-032AMS 4101AMS-QQ-A-250/29FMS 3002FMS 3008MMS 149MEP 02-029YS-X-9002YS-X-9004

2214

AIR 9048CR 1.1.031

2219

A5-SA-121-1039A5-SA-1331100-C-0019-MTAAMS 4031AMS 4295AMS-QQ-A-250/30DSN 1719.01MPS/2219/S&P/01SA-MU-42.549.04SMS 11920455 LV 09 003TS-AA2219

2219 ALCLAD

AMS 4096AMS 4600AMS 4613

2524

AMS 4296BMS 7-316MEP 02-019

2618

ABM 1-1006AIMS 03-02-021AIR 9048ASN-A 3355BAEM 1103DAN 422MEP02-020WL 3.1924

6061

AIR 9048AMS 4025AMS 4026AMS 4027AMS-QQ-A-250/11DAN 422WL 3.3214

7010

ABM 3-1029ABM 3-1030AMS 4204AMS 4205ASN-A3098ASN-A3101BAEM 1213BAEM 1218DAN 422DGQT 1.1.0.87D.T.D. 5120D.T.D. 5130EN 2684EN 2687OFWN 4017OFWN 4038SM 9102SMS 3206STD 113644TSM 42.03.66TSM 42.03.67TSM 42.03.71WL 3.4394

7020

AIR 9048

7050

AIMS 03-02-019AIMS 03-02-022AIMS 03-02-029ABM 3-1029ABM 3-1030AMS 4050AMS 4201ASNA 3048BAEM 1213BAMS 516-001BAMS 516-003 BAMS 516-035BMS 7-323 Type IBMS 7-323 Type IIICMMP 010DAN 26FDAN 422DGQT 1.1.0.97DGQT 1.1.0.0098DMS 2233DMS 2459DON 45DSN 1106EAC-MS-1004EAC-MS-MP-0162EN 3982EN 3983KMB-SK2102MEP02-014 Std Type

Sheet and plate – qualified to supply 90%+ ...

Aerospace aluminum sheet

Dimensional capabilities plateThickness up to 11.8” up to 300 mm

Width up to 138” up to 3,500 mm

Length up to 945” up to 24,000 mm

Other dimensions on request

MEP02-036MFM 0017MMS 1420MMS 1439M3184MM3184OFWN 4029OFWN 4037OFWN 4040STD 113643STM 0887TSM 42.03.69TSM 42.03.70WL 3.4144YS-X-9005YS-X-9006

7055

AIMS 03-02-024AMS 4206BAMS 516-017BMS 7-307MEP 02-048

7075

AIR 9048AMS 4044AMS 4045AMS 4078AMS 4315AMS-QQ-A-250/12AMS-QQ-A-250/13AMS-QQ-A-250/24ASN-A3009BS 2 L.95DAN 422EN 2126MMS 159STD 113627TH 5.316/3TH 5.316/5WL 3.4364

7075 ALCLAD

AMS 4048AMS 4049AMS-QQ-A-250/13AMS-QQ-A-250/25TH 33.0173

7150

ABM 3-1031AMS 4252BAEM 1219BAMS 516-006DMS 2308

7175

AIMS 03-02-008ASN-A3050CR 1.1.0.88DAN 26HDAN 422OFWN 4033SMS 003WL 3.4364

7475

AIMS 03-02-009AIR 9048AMS 4089AMS 4090AMS 4202BAMS 516-002DAN 422DMS 2184DMS 2234DON 45FMS-3004MEP 02-013 Std. TypeMEP 02-013 Type IM3188MM3188OFWN 4057STD 113637TSM 42.03.68WL 3.4384YS-X-9003199-19-005

7475 ALCLAD

AIMS 03-04-029AMS 4085DMS 2234

of today’s flying demand

The foundation of our aerospace plate expertise resides in Koblenz, Germany, where the plant began producing aerospace plate more than 35 years ago. Seizing the opportunity of projected growth in demand in Asia Pacific, we inaugurated our Zhenjiang facility in 2013. Since then, our dimensional and specification capabilities were continuously extended. Novelis is operating one of the world’s most powerful hot rolling mills in aluminium industry in both sites, in Koblenz and Zhenjiang.

WING PLATESBased on our capability to produce wide and long plates and our deep processing know-how, Novelis offers high strength upper wing and high damage tolerant lower wing alloys in plates of various sizes and gauges for integral and built-up wing solutions.

Advantages of Novelis’ aluminum rolled plates

• High strength and ductility• Extremely low level of porosity

for excellent fatigue performance• Minimal residual stresses,

practically no distortion after machining

Aerospace aluminum plate

Also qualified for supplies from Novelis Zhenjiang plant

Shape cutting and pre-machining can be offered to optimize cost efficiency and to minimize metal yield at the customer site. Closed loop recycling concepts are available upon request.

Novelis is specialized in pre-machining for long components such as wing plates which can be supplied in shaped, surface machined or even tapered format.

Improved buy-to-fly ratio via cut-to-shape, pre-machining and closed loop

Dimensional capabilitiesX-axis up to 1,771.70” up to 45,000 mm

Y-axis up to 157.5” up to 4,000 mm

Other dimensions on request

Certifications for the plants in Koblenz and Zhenjiang (aerospace related):

• DIN EN ISO 9001• EN 9100 / AS 9100 • ISO 14001• NADCAP – Heat Treating• NADCAP – Non-destructive Testing

OUR ENVIRONMENTAL, HEALTH AND SAFETY MANAGEMENT SYSTEM

We have a comprehensive Environmental, Health and Safety (EHS) management system, and all of our manufacturing sites are certified to the ISO 14001 Environmental Management Standard, as well as internationally recognized health, safety and quality standards.

RESEARCH & TECHNOLOGY CENTER: THE BASIS FOR INNOVATION

With focused Research & Development work we ensure that new products are continually introduced in order to help our customers achieve their performance targets. We have concentrated our R&D activities in different innovation centers around the world.

Shaping a Sustainable World Together

Sustainability is core to our business – from how we operate within our company to how we partner with our stakeholders across the aluminum value chain.

To reduce the need for primary aluminum as well as manufacturing waste, we work with customers to create closed loop processes, in which customers send their waste back to us to be recycled into new products.

We can develop and test all major production and processing stages as pilot processes at the production scale.

Safety. Commitment. Innovation. Forward-thinking.

Your reliable partner

Our Operational Excellence Processes set the basis for continuous improvement and ensures that production takes place under controlled conditions. This is essential to meet our goal to remain the reliable partner for the industry.

ContactNovelisSales Contact AsiaPlant ZhenjiangFloor 4, Building 24 (Tower i) , No.1618 Yishan Road, Minhang DistrictShanghai · China上海市闵行区宜山路1618号24幢（ i 栋）四层Tel: +86 (0) 21 6035 5178

Sales Contact Europe and AmericaPlant KoblenzAleris Rolled Products Germany GmbHCarl-Spaeter-Straße 1056070 Koblenz · GermanyTel: +49 (0) 261 891 0

Novelis is the world’s largest rolled aluminum producer and the global leader in aluminum recycling. Novelis is a subsidiary of Hindalco Industries Limited, an industry leader in aluminum and copper, and the metals flagship company of the Aditya Birla Group, a multinational conglomerate based in Mumbai, India.Driven by its purpose to shape a sustainable world together, Novelis partners with customers to supply valued-add aluminum solutions that maximize the benefits of sustainable lightweight aluminum throughout North America, Europe, Asia and South America. Novelis supplies its markets from a network of 34 production facilities in 10 countries and with approximately 15.000 employees. Through its worldwide operations, Novelis is a leader in premium focus areas, including aerospace, automotive, beverage can and specialty products, such as architecture and building, packaging, heat exchanger materials and other commercial products.

©2020 Aleris Rolled Products Germany GmbH · Issue 8/20 · 16th release · All rights reserved.

novelis.com

Visit novelis.com or contactaerospace@novelis.adityabirla.com to learn more.

Not just aluminum, Novelis Aluminum.TM

Social icon

SquareOnly use blue and/or white.

For more details check out ourBrand Guidelines.

Care has been taken to ensure that this information is accurate. Although any information or recommenda-tion contained herein is given in good faith, we make no warranty or guarantee, express or implied, (i) that our products meet your specific requirements, and (ii) that the results described herein will be obtained under end-use conditions, and (iii) as to the effectiveness or safety of our products, services or recommendations. Except as provided in our general terms of sale and delivery, we shall not be responsible for any loss or da-mage resulting from use of our products or services described herein. The materials, products and services described herein are sold subject to our general terms of sale and delivery.