3 [وضع التوافق]...chapter 3 — mechanical testing longitudinal and ransverse test...
TRANSCRIPT
![Page 1: 3 [وضع التوافق]...Chapter 3 — Mechanical Testing Longitudinal and ransverse test specimens taken from cold-rolled plate material exhibit different mechanical properties](https://reader033.vdocuments.us/reader033/viewer/2022041700/5e412c5648932e4948387a55/html5/thumbnails/1.jpg)
![Page 2: 3 [وضع التوافق]...Chapter 3 — Mechanical Testing Longitudinal and ransverse test specimens taken from cold-rolled plate material exhibit different mechanical properties](https://reader033.vdocuments.us/reader033/viewer/2022041700/5e412c5648932e4948387a55/html5/thumbnails/2.jpg)
PowerPoint® PresentationPowerPoint® Presentation
Chapter 3Chapter 3Mechanical TestingMechanical Testing
Mechanical Testing • Dynamic Mechanical Tests • Static Mechanical
Tests • Hardness Testing
Mechanical Testing • Dynamic Mechanical Tests • Static Mechanical
Tests • Hardness Testing
![Page 3: 3 [وضع التوافق]...Chapter 3 — Mechanical Testing Longitudinal and ransverse test specimens taken from cold-rolled plate material exhibit different mechanical properties](https://reader033.vdocuments.us/reader033/viewer/2022041700/5e412c5648932e4948387a55/html5/thumbnails/3.jpg)
Chapter 3 — Mechanical TestingChapter 3 — Mechanical Testing
A mechanical force or load may be applied using five different methods.
A mechanical force or load may be applied using five different methods.
![Page 4: 3 [وضع التوافق]...Chapter 3 — Mechanical Testing Longitudinal and ransverse test specimens taken from cold-rolled plate material exhibit different mechanical properties](https://reader033.vdocuments.us/reader033/viewer/2022041700/5e412c5648932e4948387a55/html5/thumbnails/4.jpg)
Chapter 3 — Mechanical TestingChapter 3 — Mechanical Testing
Longitudinal and ransverse test specimens taken from cold-rolled plate material exhibit different mechanical properties.
Longitudinal and ransverse test specimens taken from cold-rolled plate material exhibit different mechanical properties.
![Page 5: 3 [وضع التوافق]...Chapter 3 — Mechanical Testing Longitudinal and ransverse test specimens taken from cold-rolled plate material exhibit different mechanical properties](https://reader033.vdocuments.us/reader033/viewer/2022041700/5e412c5648932e4948387a55/html5/thumbnails/5.jpg)
Chapter 3 — Mechanical TestingChapter 3 — Mechanical Testing
There are four classifications of cyclic stresses in atigue. A cycle is each complete application of the stress.
There are four classifications of cyclic stresses in atigue. A cycle is each complete application of the stress.
![Page 6: 3 [وضع التوافق]...Chapter 3 — Mechanical Testing Longitudinal and ransverse test specimens taken from cold-rolled plate material exhibit different mechanical properties](https://reader033.vdocuments.us/reader033/viewer/2022041700/5e412c5648932e4948387a55/html5/thumbnails/6.jpg)
Chapter 3 — Mechanical TestingChapter 3 — Mechanical Testing
The magnitude of the atigue limit depends on he stress repetition pattern, which is plotted on an S-N curve.
The magnitude of the atigue limit depends on he stress repetition pattern, which is plotted on an S-N curve.
![Page 7: 3 [وضع التوافق]...Chapter 3 — Mechanical Testing Longitudinal and ransverse test specimens taken from cold-rolled plate material exhibit different mechanical properties](https://reader033.vdocuments.us/reader033/viewer/2022041700/5e412c5648932e4948387a55/html5/thumbnails/7.jpg)
Chapter 3 — Mechanical TestingChapter 3 — Mechanical Testing
Metal tested at a low strain rate is ductile compared with the same metal tested at a high strain rate.
Metal tested at a low strain rate is ductile compared with the same metal tested at a high strain rate.
![Page 8: 3 [وضع التوافق]...Chapter 3 — Mechanical Testing Longitudinal and ransverse test specimens taken from cold-rolled plate material exhibit different mechanical properties](https://reader033.vdocuments.us/reader033/viewer/2022041700/5e412c5648932e4948387a55/html5/thumbnails/8.jpg)
Chapter 3 — Mechanical TestingChapter 3 — Mechanical Testing
A universal pendulum mpact tester can perform both the Charpy and Izod mpact tests.
A universal pendulum mpact tester can perform both the Charpy and Izod mpact tests.
![Page 9: 3 [وضع التوافق]...Chapter 3 — Mechanical Testing Longitudinal and ransverse test specimens taken from cold-rolled plate material exhibit different mechanical properties](https://reader033.vdocuments.us/reader033/viewer/2022041700/5e412c5648932e4948387a55/html5/thumbnails/9.jpg)
Chapter 3 — Mechanical TestingChapter 3 — Mechanical Testing
The V-notch is the most common Charpy and zod impact test specimen.
The V-notch is the most common Charpy and zod impact test specimen.
![Page 10: 3 [وضع التوافق]...Chapter 3 — Mechanical Testing Longitudinal and ransverse test specimens taken from cold-rolled plate material exhibit different mechanical properties](https://reader033.vdocuments.us/reader033/viewer/2022041700/5e412c5648932e4948387a55/html5/thumbnails/10.jpg)
Chapter 3 — Mechanical TestingChapter 3 — Mechanical Testing
The swing of the pendulum after it strikes he test specimen ndicates the energy absorbed on impact.
The swing of the pendulum after it strikes he test specimen ndicates the energy absorbed on impact.
![Page 11: 3 [وضع التوافق]...Chapter 3 — Mechanical Testing Longitudinal and ransverse test specimens taken from cold-rolled plate material exhibit different mechanical properties](https://reader033.vdocuments.us/reader033/viewer/2022041700/5e412c5648932e4948387a55/html5/thumbnails/11.jpg)
Chapter 3 — Mechanical TestingChapter 3 — Mechanical Testing
The main differences between he Charpy and Izod impact tests are the position of the notch and he method of support of the test specimen.
The main differences between he Charpy and Izod impact tests are the position of the notch and he method of support of the test specimen.
![Page 12: 3 [وضع التوافق]...Chapter 3 — Mechanical Testing Longitudinal and ransverse test specimens taken from cold-rolled plate material exhibit different mechanical properties](https://reader033.vdocuments.us/reader033/viewer/2022041700/5e412c5648932e4948387a55/html5/thumbnails/12.jpg)
Chapter 3 — Mechanical TestingChapter 3 — Mechanical Testing
The sharper the inflection of the curve, the easier he estimation of the NDT emperature.
The sharper the inflection of the curve, the easier he estimation of the NDT emperature.
![Page 13: 3 [وضع التوافق]...Chapter 3 — Mechanical Testing Longitudinal and ransverse test specimens taken from cold-rolled plate material exhibit different mechanical properties](https://reader033.vdocuments.us/reader033/viewer/2022041700/5e412c5648932e4948387a55/html5/thumbnails/13.jpg)
Chapter 3 — Mechanical TestingChapter 3 — Mechanical Testing
The drop weight test is more eliable than the Charpy when
determining ductility.
The drop weight test is more eliable than the Charpy when
determining ductility.
![Page 14: 3 [وضع التوافق]...Chapter 3 — Mechanical Testing Longitudinal and ransverse test specimens taken from cold-rolled plate material exhibit different mechanical properties](https://reader033.vdocuments.us/reader033/viewer/2022041700/5e412c5648932e4948387a55/html5/thumbnails/14.jpg)
Chapter 3 — Mechanical TestingChapter 3 — Mechanical Testing
A universal testing machine can be mechanical or hydraulic.A universal testing machine can be mechanical or hydraulic.
![Page 15: 3 [وضع التوافق]...Chapter 3 — Mechanical Testing Longitudinal and ransverse test specimens taken from cold-rolled plate material exhibit different mechanical properties](https://reader033.vdocuments.us/reader033/viewer/2022041700/5e412c5648932e4948387a55/html5/thumbnails/15.jpg)
Chapter 3 — Mechanical TestingChapter 3 — Mechanical Testing
A fillet is used on the ensile test specimen to minimize stress concentrations, and the gauge marks are always an equal distance from he center of the length of the reduced section.
A fillet is used on the ensile test specimen to minimize stress concentrations, and the gauge marks are always an equal distance from he center of the length of the reduced section.
![Page 16: 3 [وضع التوافق]...Chapter 3 — Mechanical Testing Longitudinal and ransverse test specimens taken from cold-rolled plate material exhibit different mechanical properties](https://reader033.vdocuments.us/reader033/viewer/2022041700/5e412c5648932e4948387a55/html5/thumbnails/16.jpg)
Chapter 3 — Mechanical TestingChapter 3 — Mechanical Testing
A variety of tensile test specimen ends are used o ensure secure and uniform gripping by the est machine.
A variety of tensile test specimen ends are used o ensure secure and uniform gripping by the est machine.
![Page 17: 3 [وضع التوافق]...Chapter 3 — Mechanical Testing Longitudinal and ransverse test specimens taken from cold-rolled plate material exhibit different mechanical properties](https://reader033.vdocuments.us/reader033/viewer/2022041700/5e412c5648932e4948387a55/html5/thumbnails/17.jpg)
Chapter 3 — Mechanical TestingChapter 3 — Mechanical Testing
An extensometer measures the extension of elongation of the ensile test specimen.
An extensometer measures the extension of elongation of the ensile test specimen.
![Page 18: 3 [وضع التوافق]...Chapter 3 — Mechanical Testing Longitudinal and ransverse test specimens taken from cold-rolled plate material exhibit different mechanical properties](https://reader033.vdocuments.us/reader033/viewer/2022041700/5e412c5648932e4948387a55/html5/thumbnails/18.jpg)
Chapter 3 — Mechanical TestingChapter 3 — Mechanical Testing
The load-extension curve shows load and extension mits for metals.
The load-extension curve shows load and extension mits for metals.
![Page 19: 3 [وضع التوافق]...Chapter 3 — Mechanical Testing Longitudinal and ransverse test specimens taken from cold-rolled plate material exhibit different mechanical properties](https://reader033.vdocuments.us/reader033/viewer/2022041700/5e412c5648932e4948387a55/html5/thumbnails/19.jpg)
Chapter 3 — Mechanical TestingChapter 3 — Mechanical Testing
ncreased gauge length and reduced diameter at he narrowest point are measured and used to calculate the percent elongation and percent eduction in area.
ncreased gauge length and reduced diameter at he narrowest point are measured and used to calculate the percent elongation and percent eduction in area.
![Page 20: 3 [وضع التوافق]...Chapter 3 — Mechanical Testing Longitudinal and ransverse test specimens taken from cold-rolled plate material exhibit different mechanical properties](https://reader033.vdocuments.us/reader033/viewer/2022041700/5e412c5648932e4948387a55/html5/thumbnails/20.jpg)
Chapter 3 — Mechanical TestingChapter 3 — Mechanical Testing
The yield strength, or 0.2% offset, is calculated by measuring the stress that causes a specific permanent strain (usually 0.2%).
The yield strength, or 0.2% offset, is calculated by measuring the stress that causes a specific permanent strain (usually 0.2%).
![Page 21: 3 [وضع التوافق]...Chapter 3 — Mechanical Testing Longitudinal and ransverse test specimens taken from cold-rolled plate material exhibit different mechanical properties](https://reader033.vdocuments.us/reader033/viewer/2022041700/5e412c5648932e4948387a55/html5/thumbnails/21.jpg)
Chapter 3 — Mechanical TestingChapter 3 — Mechanical Testing
Percent elongation is calculated rom the gauge length.Percent elongation is calculated rom the gauge length.
![Page 22: 3 [وضع التوافق]...Chapter 3 — Mechanical Testing Longitudinal and ransverse test specimens taken from cold-rolled plate material exhibit different mechanical properties](https://reader033.vdocuments.us/reader033/viewer/2022041700/5e412c5648932e4948387a55/html5/thumbnails/22.jpg)
Chapter 3 — Mechanical TestingChapter 3 — Mechanical Testing
The guided bend test is an inexpensive and rapid method to check the quality of a weld.
The guided bend test is an inexpensive and rapid method to check the quality of a weld.
![Page 23: 3 [وضع التوافق]...Chapter 3 — Mechanical Testing Longitudinal and ransverse test specimens taken from cold-rolled plate material exhibit different mechanical properties](https://reader033.vdocuments.us/reader033/viewer/2022041700/5e412c5648932e4948387a55/html5/thumbnails/23.jpg)
Chapter 3 — Mechanical TestingChapter 3 — Mechanical Testing
Cupping tests provide an indication of the ormability of sheet metal.
Cupping tests provide an indication of the ormability of sheet metal.
![Page 24: 3 [وضع التوافق]...Chapter 3 — Mechanical Testing Longitudinal and ransverse test specimens taken from cold-rolled plate material exhibit different mechanical properties](https://reader033.vdocuments.us/reader033/viewer/2022041700/5e412c5648932e4948387a55/html5/thumbnails/24.jpg)
Chapter 3 — Mechanical TestingChapter 3 — Mechanical Testing
A torsion testing machine is used for determining a metal’s esistance to shear.
A torsion testing machine is used for determining a metal’s esistance to shear.
![Page 25: 3 [وضع التوافق]...Chapter 3 — Mechanical Testing Longitudinal and ransverse test specimens taken from cold-rolled plate material exhibit different mechanical properties](https://reader033.vdocuments.us/reader033/viewer/2022041700/5e412c5648932e4948387a55/html5/thumbnails/25.jpg)
Chapter 3 — Mechanical TestingChapter 3 — Mechanical Testing
A tropometer is used to measure the degree of wist during a torsion test.
A tropometer is used to measure the degree of wist during a torsion test.
![Page 26: 3 [وضع التوافق]...Chapter 3 — Mechanical Testing Longitudinal and ransverse test specimens taken from cold-rolled plate material exhibit different mechanical properties](https://reader033.vdocuments.us/reader033/viewer/2022041700/5e412c5648932e4948387a55/html5/thumbnails/26.jpg)
Chapter 3 — Mechanical TestingChapter 3 — Mechanical Testing
The scleroscope hardness tester uses the height of rebound of a diamond-tipped hammer rom the test specimen surface to determine hardness.
The scleroscope hardness tester uses the height of rebound of a diamond-tipped hammer rom the test specimen surface to determine hardness.
![Page 27: 3 [وضع التوافق]...Chapter 3 — Mechanical Testing Longitudinal and ransverse test specimens taken from cold-rolled plate material exhibit different mechanical properties](https://reader033.vdocuments.us/reader033/viewer/2022041700/5e412c5648932e4948387a55/html5/thumbnails/27.jpg)
Chapter 3 — Mechanical TestingChapter 3 — Mechanical Testing
The Equotip metal hardness tester can be used in five positions.
The Equotip metal hardness tester can be used in five positions.
![Page 28: 3 [وضع التوافق]...Chapter 3 — Mechanical Testing Longitudinal and ransverse test specimens taken from cold-rolled plate material exhibit different mechanical properties](https://reader033.vdocuments.us/reader033/viewer/2022041700/5e412c5648932e4948387a55/html5/thumbnails/28.jpg)
Chapter 3 — Mechanical TestingChapter 3 — Mechanical Testing
The Brinell hardness ester applies a load for a specific period of time and causes an ndentation that is used o calculate hardness.
The Brinell hardness ester applies a load for a specific period of time and causes an ndentation that is used o calculate hardness.
![Page 29: 3 [وضع التوافق]...Chapter 3 — Mechanical Testing Longitudinal and ransverse test specimens taken from cold-rolled plate material exhibit different mechanical properties](https://reader033.vdocuments.us/reader033/viewer/2022041700/5e412c5648932e4948387a55/html5/thumbnails/29.jpg)
Chapter 3 — Mechanical TestingChapter 3 — Mechanical Testing
Soft or hard metals require careful measurement of heir indentations in the Brinell test.
Soft or hard metals require careful measurement of heir indentations in the Brinell test.
![Page 30: 3 [وضع التوافق]...Chapter 3 — Mechanical Testing Longitudinal and ransverse test specimens taken from cold-rolled plate material exhibit different mechanical properties](https://reader033.vdocuments.us/reader033/viewer/2022041700/5e412c5648932e4948387a55/html5/thumbnails/30.jpg)
Chapter 3 — Mechanical TestingChapter 3 — Mechanical Testing
The Rockwell test uses two loads, a minor and a major, that are applied sequentially to determine hardness.
The Rockwell test uses two loads, a minor and a major, that are applied sequentially to determine hardness.
![Page 31: 3 [وضع التوافق]...Chapter 3 — Mechanical Testing Longitudinal and ransverse test specimens taken from cold-rolled plate material exhibit different mechanical properties](https://reader033.vdocuments.us/reader033/viewer/2022041700/5e412c5648932e4948387a55/html5/thumbnails/31.jpg)
Chapter 3 — Mechanical TestingChapter 3 — Mechanical Testing
The Rockwell designation system consists of the hardness number followed by HR, which is followed by the etter indicating the specific Rockwell scale.
The Rockwell designation system consists of the hardness number followed by HR, which is followed by the etter indicating the specific Rockwell scale.
![Page 32: 3 [وضع التوافق]...Chapter 3 — Mechanical Testing Longitudinal and ransverse test specimens taken from cold-rolled plate material exhibit different mechanical properties](https://reader033.vdocuments.us/reader033/viewer/2022041700/5e412c5648932e4948387a55/html5/thumbnails/32.jpg)
Chapter 3 — Mechanical TestingChapter 3 — Mechanical Testing
The microhardness measured by a microhardness tester is always higher than the bulk surface hardness.
The microhardness measured by a microhardness tester is always higher than the bulk surface hardness.