high breakdown voltage - sanyu-usa.com · what does tpm stand for? rust romise ovement trust in the...
TRANSCRIPT
SANYU ELECTRIC, INC. is a California corporation established in November of 1995, selling reed relays to companies in the U.S. and all over the world.
Its parent company, SANYU SWITCH CO., LTD., a Japanese corporation, is headquartered in Tokyo, Japan and has extensive experience in developing various types of reed relay since 1972. Today, SANYU SWITCH CO., LTD. has a factory located in Kumamoto, Japan and Shanghai, China. SANYU SWITCH CO., LTD and its Japanese subsidiary are certified ISO9001 and operate in accordance with ISO quality standard.
SANYU ELECTRIC PTE. LTD., is a subsidiary of SANYU ELECTRIC, INC. located in Singapore. It was established in September of 2007 to enable closest customer relations and to focus business in Singapore, Malaysia, Thailand, the Philippines, Vietnam, Indonesia and the China territories. SANYU ELECTRIC PTE. LTD. provides technical and sales support to S.E. Asia businesses.
70,000 reed relays are produced each day at SANYU SWITCH CO., LTD. and its Japanese subsidiary. The Kumamoto factory established fully automated manufacturing lines, from incoming inspection to final shipment inspection, including packaging. The factory of SANYU SWITCH CO., LTD. and subsidiaries are certified ISO9001 and have adopted TQM, Manage Preventative Action, Corrective Action, Failure Mode and Effect Analysis, Production Part Approval Process and more.
SANYU SWITCH CO., LTD. and its subsidiaries use the “Toyota way”, emulating the company known for Japanese quality management.Technically advanced environmental tests include Kelvin Contact Test, Paschen Test and more.
SANYU SWITCH CO., LTD. and its subsidiaries utilize the latest in high-end measurement equipment: 70G/50GHz digital sampling oscilloscope with TDR module 20G/50GHz, S-parameter 13.5G/40G/50G/65GHz and BERT 13.5Gbps/40Gbps, including error detector. All SMT products are 100% tested with fully automated test equipment.SANYU SWITCH CO., LTD. and its subsidiaries use CST//ADS simulation software in its design process to reduce development time, and maintain the upper edge in high speed technology. They have used this technology, not only in reed relays, but in microwave products, cable assemblies and interconnect products since 2003. Technology never stops, and SANYU SWITCH CO., LTD. and its subsidiaries continually create advanced technologies and products.
What does TPM stand for?
rust
romise
ovement
Trust in the products we offer
Promises we make, we keep
By incorporating TPM as a part of our slogans, we are reminded of the importance of our core valuesand spirit.
Prompt correspondence and support we provide for our customers
Provide society with superior products and services by developing innovations and solutions that improve thequality of life and satisfy customer needs, and to provide employees with meaningful work and advancement opportunities, and investors with a superior rate of return.
Our Mission
Technology
HFSS/CST Simulation Technology
Measurement Analysis
SANYU SWITCH CO., LTD and its subsidiaries’ technology-driven product development philosophyand strong research background ensure a broad selection of products ranging from high frequencyreed relay to interconnect products. Both mechanical and electrical aspects of the company’s product characterization and design are backed by strong production engineeringand manufacturing capabilities, assuring the highest quality products.
Turning Concept into Reality
ADS Analysis
Fundamental Research, combined with the latest simulation tools and measerment equipment, ensuressolid product development.
The latest simulation software, such as CST, HFSS, ADS and fast proto type manufacturing capability,shorten R&D time.
DFMEA and PFMEA are utilized to eliminate a potential problem. This process perfects the productdesign for superior product function, reliability and manufacturability.
Test & R&D capability:
- S-Parameter Agilent N5230A 10MHz-40GHz
- TDR/TDT Tektronix TDS/CSA8000 with 80E04 20GHz and 80E10 50GHz/Iconnect S-Parameter capability up to 50GHz BERT Agilent N4901B-200 13.5GB/s
Through a company-wide training program, all employees are taught to use this equipment effeciently.
Design Guide for High Frequency Application
Notes: All specifications on this datasheet and production status are subject to change without notice. Prior to the purchase, please contact Sanyu Electric, Inc. for updated product specifications and request specification sheets for detailed product data.
Table of Contents
High Breakdown Voltage
HA700 Series -----------------------------------------------------
HA701 Series -----------------------------------------------------
HA702 Series -----------------------------------------------------
HA703 Series ----------------------------------------------------
HA704 Series ----------------------------------------------------
HA705 Series ----------------------------------------------------
HA706 Series ----------------------------------------------------
HA707 Series ----------------------------------------------------
HA708 Series ----------------------------------------------------
1
3
5
9
11
13
15
17
19
HA702 18KV Series ---------------------------------------------- 7
Notes: All specifications on this datasheet and production status are subject to change without notice. Prior to the purchase, please contact Sanyu Electric, Inc. for updated product specifications and request specification sheets for detailed product data.
1
PRODUCT DESCRIPTIONS
Since 1990, the HA700 series has been a worldwide standard for highbreakdown voltage PCB mount reed relays. With coil voltage options of5.0/12.0/24.0V and dielectric strength options of 5.0/10.0/15.0KV, theHA700 series can be adopted to follow our customer’s specific designrequirements.
- Breakdown Voltage 5.0/10.0/15.0KV- Contact Rating 50W- Switching Voltage up to 10.0KV- Carry Current 4.0A- Reliability 10 Cycle
HA700 Series PCB Mount / High Breakdown
SPECIFICATIONS
HA700 Series HA700-105
HA700-110
HA700-115
Parameters Units 1 Form A Test Conditions Coil Specifications Nominal Coil Voltage Coil Resistance Operate Voltage Release Voltage
VDC Ω
VDC Max VDC Min
5.0 45
3.75 0.7
12.0 250 8.8 1.2
24.0 1000 17.6 2.4
5.0 45
3.75 0.7
12.0 250 8.8 1.2
24.0 1000 17.6 2.4
5.0 30
3.75 0.7
12.0 150 8.8 1.2
24.0 600 17.6 2.4
±10% @ 20˚C @ 20˚C @ 20˚C
Contact Ratings Switching Voltage Switching Current Carry Current
Contact Rating Life Expectancy Contact Resistance Contact Resistance Stability
Volts Amps Amps
Watts x106 Cycle
mΩ mΩ
3500 3.0 4.0
50 100 200 20
7500 3.0 4.0
50 100 200 20
10000 3.0 4.0
50 100 200 20
Max DC/Peak AC resistance Max DC/Peak AC resistance Max DC/Peak AC resistance(@30˚C) Max DC/Peak AC resistance @ 1V 10mA Max initial @ operate voltage Max initial @ operate voltage
Relay Specifications
Insulation Resistance Dielectric Strength (Static) Operate Time (Including Bounce) Release Time
Ω Min Ω Min
VDC Min VDC Min
msec Max
msec Max
1010
1012
5000 5000
3.0
1.5
1010
1012
10000 10000
3.0
1.5
1010
1012
15000* 15000
3.0
1.5
Between contacts Contacts to coil @ 100V 20˚C 65%RH Between contacts Contacts to coil @ nominal coil voltage 100 Hz square wave Diode suppression
Measurement Reference Conditions Environmental Ratings Temp: 15˚C to 35˚C Humidity: 25% to 75%RH Atmospheric Pressure: 860 to 1060hpa
Storage temp: -40˚C to +85˚C Operate temp: -20˚C to +80˚C Vibration: 20G’s to 2000Hz Shock: 50G’s
HA700-105, HA700-110 HA700-115 = 05(5.0VDC), 12(12.0VDC), 24(24.0VDC)
Ordering Code:
8
* Terms/Conditions of Dielectric Strength: Polarity required as pin#1(+) and pin#2(-) for 15KV dielectric strength between contacts.
,
2
HA700-105/110/115
(2.697)68.5
MAX
1 2
All Dimensions are mm (inch)
(4-Ø0.031)4-Ø0.8
P1
(1.181)30.0
+0.3-0.3
P2
(0.768)19.5
MAX
)787. 0(0. 02
MAX
) 420. 0(6. 0
)621.0(2.3
(1.181)30.0
+0.3-0.3
(2-0.295)2-7.5
+0.3-0.3
21
P2
P1
3
PRODUCT DESCRIPTIONS
The HA701 series have unique design features such as signal pins that extend beyond the top of the relay’s surface. With only coil pins, these fixed PCB mounts do not require high voltage signals to pass through the PCB allowing for improved safety. The HA701 series has coil voltageoptions of 5.0/12.0/24.0V and dielectric strength options of 5.0/10.0/15.0KV. Thus, it can be adopted to follow our customer’s specific designrequirements.
- Breakdown Voltage 5.0/10.0/15.0KV- Contact Rating 50W- Switching Voltage up to 10.0KV- Carry Current 4.0A- Reliability 10 Cycle
HA701 Series PCB Mount / High Breakdown
SPECIFICATIONS
HA701 Series HA701-105
HA701-110
HA701-115
Parameters Units 1 Form A Test Conditions Coil Specifications Nominal Coil Voltage Coil Resistance Operate Voltage Release Voltage
VDC Ω
VDC Max VDC Min
5.0 45
3.75 0.7
12.0 250 8.8 1.2
24.0 1000 17.6 2.4
5.0 45
3.75 0.7
12.0 250 8.8 1.2
24.0 1000 17.6 2.4
5.0 30
3.75 0.7
12.0 150 8.8 1.2
24.0 600 17.6 2.4
±10% @ 20˚C @ 20˚C @ 20˚C
Contact Ratings Switching Voltage Switching Current Carry Current
Contact Rating Life Expectancy Contact Resistance Contact Resistance Stability
Volts Amps Amps
Watts x106 Cycle
mΩ mΩ
3500 3.0 4.0
50 100 200 20
7500 3.0 4.0
50 100 200 20
10000 3.0 4.0
50 100 200 20
Max DC/Peak AC resistance Max DC/Peak AC resistance Max DC/Peak AC resistance(@30˚C) Max DC/Peak AC resistance @ 1V 10mA Max initial @ operate voltage Max initial @ operate voltage
Relay Specifications
Insulation Resistance Dielectric Strength (Static) Operate Time (Including Bounce) Release Time
Ω Min Ω Min
VDC Min VDC Min
msec Max
msec Max
1010
1012
5000 5000
3.0
1.5
1010
1012
10000 10000
3.0
1.5
1010
1012
15000* 15000
3.0
1.5
Between contacts Contacts to coil @ 100V 20˚C 65%RH Between contacts Contacts to coil @ nominal coil voltage 100 Hz square wave Diode suppression
Measurement Reference Conditions Environmental Ratings Temp: 15˚C to 35˚C Humidity: 25% to 75%RH Atmospheric Pressure: 860 to 1060hpa
Storage temp: -40˚C to +85˚C Operate temp: -20˚C to +80˚C Vibration: 20G’s to 2000Hz Shock: 50G’s
HA701-105, HA701-110, HA701-115
Ordering Code:
=05(5.0VDC), 12(12.0VDC), 24(24.0VDC)
8
* Terms/Conditions of Dielectric Strength: Polarity required as pin#1(+) and pin#2(-) for 15KV dielectric strength between contacts.
4
HA701-105/110/115
(2.697)68.5
MAX
1 2
All Dimensions are mm (inch)
(4-Ø0.031)4-Ø0.8
P1
(2.362)60.0
+0.3-0.3
P2
(0.768)19.5
MAX
(0.591)15.0
+0.3-0.3
)787. 0(0. 02
MAX
) 420. 0(6. 0
)621.0(2.3
) 831. 0(5. 3
1 2
P1
P2
5
PRODUCT DESCRIPTIONS
The HA702 series of relays are enhanced from the HA701 series with thehigh breakdown cables protruding from on top of the relay’s surface inorder to help achieve assembly cost reductions. The HA702 series has coilvoltage options of 5.0/12.0/24.0V and dielectric strength of 5.0/10.0/15.0KVand can be adopted to meet our customer’s specific design requirements.
- Breakdown Voltage 5.0/10.0/15.0KV- Contact Rating 50W- Switching Voltage up to 10.0KV- Carry Current 4.0A- Reliability 10 Cycle
HA702 Series PCB Mount / High Breakdown
SPECIFICATIONS
HA702 Series HA702-105
HA702-110
HA702-115
Parameters Units 1 Form A Test Conditions Coil Specifications Nominal Coil Voltage Coil Resistance Operate Voltage Release Voltage
VDC Ω
VDC Max VDC Min
5.0 45
3.75 0.7
12.0 250 8.8 1.2
24.0 1000 17.6 2.4
5.0 45
3.75 0.7
12.0 250 8.8 1.2
24.0 1000 17.6 2.4
5.0 30
3.75 0.7
12.0 150 8.8 1.2
24.0 600 17.6 2.4
±10% @ 20˚C @ 20˚C @ 20˚C
Contact Ratings Switching Voltage Switching Current Carry Current
Contact Rating Life Expectancy Contact Resistance Contact Resistance Stability
Volts Amps Amps
Watts x106 Cycle
mΩ mΩ
3500 3.0 4.0
50 100 200 20
7500 3.0 4.0
50 100 200 20
10000 3.0 4.0
50 100 200 20
Max DC/Peak AC resistance Max DC/Peak AC resistance Max DC/Peak AC resistance(@30˚C) Max DC/Peak AC resistance @ 1V 10mA Max initial @ operate voltage Max initial @ operate voltage
Relay Specifications
Insulation Resistance Dielectric Strength (Static) Operate Time (Including Bounce) Release Time
Ω Min Ω Min
VDC Min VDC Min
msec Max
msec Max
1010
1012
5000 5000
3.0
1.5
1010
1012
10000 10000
3.0
1.5
1010
1012
15000* 15000
3.0
1.5
Between contacts Contacts to coil @ 100V 20˚C 65%RH Between contacts Contacts to coil @ nominal coil voltage 100 Hz square wave Diode suppression
Measurement Reference Conditions Environmental Ratings Temp: 15˚C to 35˚C Humidity: 25% to 75%RH Atmospheric Pressure: 860 to 1060hpa
Storage temp: -40˚C to +85˚C Operate temp: -20˚C to +80˚C Vibration: 20G’s to 2000Hz Shock: 50G’s
HA702-105, HA702-110, HA702-115
Ordering Code:
=05(5.0VDC), 12(12.0VDC), 24(24.0VDC)
8
* Terms/Conditions of Dielectric Strength: Polarity required as pin#1(+) and pin#2(-) for 15KV dielectric strength between contacts.
6
HA702-105/110/115
(2.697)68.5
MAX
1 2
All Dimensions are mm (inch)
(2-Ø0.031)2-Ø0.8
P1
(2.362)60.0
P2
(0.768)19.5
MAX
)478.7(0.002
MIN
(0.787
)20
.0MA
X
)420.0(6.0
) 621. 0(2. 3
(0.591)15.0
+0.3-0.3
)811. 0(0. 3
UL 3239 AWG22Silicone High-Voltage wire
P1
P2
21
7
PRODUCT DESCRIPTIONS
The ultra breakdown relay, HA702 18KV series, is added to Sanyu high breakdown products line. This HA702 series achieves the highest specamong this product family, 18KV breakdown voltage between contacts(max)and 12KV switching voltage(max). In order to reduce assembly cost anddifficulties, this series adopts structure with the high breakdown signalcables protruding from the top of the relay’s surface and underneath coillead for relay positioning and anchoring. We continue to support the fields of electrical safety-related validation, testing, inspection, and services.
- Ultra Breakdown Voltage 18.0KV Between Contacts- Unique Assembly Design- Switching Voltage 12.0KV
HA702 18KV Series PCB Mount / Super High Breakdown
SPECIFICATIONS
* Terms/Conditions of Dielectric Strength: Polarity required as pin#1(+) and pin#2(-) for 18KV dielectric strength
HA702 18KV HA702-118
Parameters Units 1 Form A Test Conditions Coil Specifications Nominal Coil Voltage Coil Resistance Operate Voltage Release Voltage
VDC Ω
VDC Max VDC Min
5.0 30
3.75 0.7
12.0 150 8.8 1.2
24.0 600 17.6 2.4
±10% @ 20˚C @ 20˚C @ 20˚C
Contact Ratings Switching Voltage Switching Current Carry Current Contact Rating Life Expectancy Contact Resistance Contact Resistance Stability
Volts Amps Amps Watts
x106 Cycle mΩ mΩ
12000 3.0 4.0 50 100 200 20
Max DC/Peak AC resistance Max DC/Peak AC resistance Max DC/Peak AC resistance(@30˚C) Max DC/Peak AC resistance @ 1V 10mA Max initial @ operate voltage Max initial @ operate voltage
Relay Specifications
Insulation Resistance
Dielectric Strength (Static) Operate Time (No Bounce) Release Time
Ω Min Ω Min
VDC Min VDC Min
msec Max
msec Max
1010
1012
18000* 18000
3.0
1.5
Between contacts Contacts to coil @ 100V 20˚C 65%RH Between contacts Contacts to coil @ nominal coil voltage 100 Hz square wave Diode suppression
Measurement Reference Conditions Environmental Ratings Temp: 15˚C to 35˚C Humidity: 25% to 75%RH Atmospheric Pressure: 860 to 1060hpa
Storage temp: -40˚C to +85˚C Operate temp: -20˚C to +80˚C Vibration: 20G’s to 2000Hz Shock: 50G’s
Ordering Code:
HA702-118
between contacts.
=05(5.0VDC), 12(12.0VDC), 24(24.0VDC)
8
(2.697)68.5
MAX
1 2
All Dimensions are mm (inch)
(2-Ø0.031)2-Ø0.8
P1
(2.362)60.0
P2
(0.768)19.5
MAX
)478.7(0.002
MIN
(0.787
)20
.0MA
X
)420.0(6.0
) 621. 0(2. 3
(0.591)15.0
+0.3-0.3
)811. 0(0. 3
UL 3239 AWG22Silicone High-Voltage wire
P1
P2
21
9
PRODUCT DESCRIPTIONS
The HA703 series provides a small form factor size of 65.5x15.0mm.It is designed with standard signal pins and coil pins layout. The HA703series also has coil voltage options of 5.0/12.0/24.0V and dielectric strength options of 10.0/15.0KV and can be adopted to meet our customer’sspecific design requirements.
- Breakdown Voltage 10.0/15.0KV- Contact Rating 50W- Switching Voltage up to 10.0KV- Carry Current 4.0A- Reliability 10 Cycle
HA703 Series PCB Mount / High Breakdown
SPECIFICATIONS
8
HA703 Series HA703-110 HA703-115
Parameters Units 1 Form A Test Conditions Coil Specifications Nominal Coil Voltage Coil Resistance Operate Voltage Release Voltage
VDC Ω
VDC Max VDC Min
5.0 45
3.75 0.7
12.0 250 8.8 1.2
24.0 1000 17.6 2.4
5.0 30
3.75 0.7
12.0 120 8.8 1.2
24.0 465 17.6 2.4
±10% @ 20˚C @ 20˚C @ 20˚C
Contact Ratings Switching Voltage Switching Current Carry Current Contact Rating Life Expectancy Contact Resistance Contact Resistance Stability
Volts Amps Amps Watts
x106 Cycle mΩ mΩ
7500 3.0 4.0 50 100 200 20
10000 3.0 4.0 50 100 200 20
Max DC/Peak AC resistance Max DC/Peak AC resistance Max DC/Peak AC resistance(@30˚C) Max DC/Peak AC resistance @ 1V 10mA Max initial @ operate voltage Max initial @ operate voltage
Relay Specifications
Insulation Resistance
Dielectric Strength (Static) Operate Time (Including Bounce) Release Time
Ω Min Ω Min
VDC Min VDC Min
msec Max
msec Max
1013
1013
10000 10000
3.0
1.5
1013
1013
15000* 10000
3.0
1.5
Between contacts Contacts to coil @ 100V 20˚C 65%RH Between contacts Contacts to coil @ nominal coil voltage 100 Hz square wave Diode suppression
Measurement Reference Conditions Environmental Ratings Temp: 15˚C to 35˚C Humidity: 25% to 75%RH Atmospheric Pressure: 860 to 1060hpa
Storage temp: -40˚C to +85˚C Operate temp: -20˚C to +80˚C Vibration: 20G’s to 2000Hz Shock: 50G’s
Ordering Code: HA703-110 , HA703-115
=05(5.0VDC), 12(12.0VDC), 24(24.0VDC)
* Terms/Conditions of Dielectric Strength: Polarity required as pin#1(+) and pin#2(-) for 15KV dielectric strength between contacts.
10
HA703-110/115
(2.579)65.5
MAX
(1.0)25.4
+0.3-0.3
1 2
All Dimensions are mm (inch)
(1.0)25.4
+0.3-0.3
(4-Ø0.031)4-Ø0.8
(0.591)15.0
MAX
(0.2)5.08
+0.3-0.3
(0.2)5.08
+0.3-0.3
)20.0(5. 0
)16.0(5.51
MAX
(0.125
)3.2
P1
P2
P1
P2
1 2
11
PRODUCT DESCRIPTIONS
The HA704 series provides a small form factor size of 65.5x15.0mmand has non-standard signal pins with coil pins layout. With coil voltageoptions of 5.0/12.0/24.0V and dielectric strength options of 10.0/15.0KV,the HA704 series can be adopted to meet our cutomer’s specific designrequirements.
- Breakdown Voltage 10.0/15.0KV- Contact Rating 50W- Switching Voltage up to 10.0KV- Carry Current 4.0A- Reliability 10 Cycle
HA704 Series PCB Mount / High Breakdown
SPECIFICATIONS
8
Ordering Code: HA704-110 , HA704-115
HA704 Series HA704-110 HA704-115
Parameters Units 1 Form A Test Conditions Coil Specifications Nominal Coil Voltage Coil Resistance Operate Voltage Release Voltage
VDC Ω
VDC Max VDC Min
5.0 45
3.75 0.7
12.0 250 8.8 1.2
24.0 1000 17.6 2.4
5.0 30
3.75 0.7
12.0 120 8.8 1.2
24.0 465 17.6 2.4
±10% @ 20˚C @ 20˚C @ 20˚C
Contact Ratings Switching Voltage Switching Current Carry Current Contact Rating Life Expectancy Contact Resistance Contact Resistance Stability
Volts Amps Amps Watts
x106 Cycle mΩ mΩ
7500 3.0 4.0 50 100 200 20
10000 3.0 4.0 50 100 200 20
Max DC/Peak AC resistance Max DC/Peak AC resistance Max DC/Peak AC resistance(@30˚C) Max DC/Peak AC resistance @ 1V 10mA Max initial @ operate voltage Max initial @ operate voltage
Relay Specifications
Insulation Resistance
Dielectric Strength
(Static) Operate Time (Including Bounce) Release Time
Ω Min Ω Min
VDC Min VDC Min
msec Max
msec Max
1013
1013
10000 10000
3.0
1.5
1013
1013
15000* 10000
3.0
1.5
Between contacts Contacts to coil @ 100V 20˚C 65%RH Between contacts Contacts to coil @ nominal coil voltage 100 Hz square wave Diode suppression
Measurement Reference Conditions Environmental Ratings Temp: 15˚C to 35˚C Humidity: 25% to 75%RH Atmospheric Pressure: 860 to 1060hpa
Storage temp: -40˚C to +85˚C Operate temp: -20˚C to +80˚C Vibration: 20G’s to 2000Hz Shock: 50G’s
=05(5.0VDC), 12(12.0VDC), 24(24.0VDC)
* Terms/Conditions of Dielectric Strength: Polarity required as pin#1(+) and pin#2(-) for 15KV dielectric strength between contacts.
12
HA704-110/115
(2.579)65.5
MAX
1 2
All Dimensions are mm (inch)
(1.181)30.0
+0.3-0.3
(4-Ø0.031)4-Ø0.8
(0.591)15.0
MAX
(0.197)5.0
+0.3-0.3
)20.0(5. 0
)16.0(5.51
MAX
(0.125
)3.2
P1
P2
(1.083)27.5
+0.3-0.3
(0.197)5.0
+0.3-0.3
P1
P2
21
13
PRODUCT DESCRIPTIONS
The HA705 series is similar in design with the HA700 series with a dimension of 68.5x19.5mm. Differential signal pins and coil pins aredesigned in an inch layout with coil voltage options of 5.0/12.0/24.0Vand dielectric strength options of 10.0/15.0KV. Thus, it can be adoptedto follow our customer’s specific design requirements.
- Breakdown Voltage 10.0/15.0KV- Contact Rating 50W- Switching Voltage up to 10.0KV- Carry Current 4.0A- Reliability 10 Cycle
HA705 Series PCB Mount / High Breakdown
SPECIFICATIONS
8
Ordering Code: HA705-110 , HA705-115
HA705 Series HA705-110 HA705-115
Parameters Units 1 Form A Test Conditions Coil Specifications Nominal Coil Voltage Coil Resistance Operate Voltage Release Voltage
VDC Ω
VDC Max VDC Min
5.0 45
3.75 0.7
12.0 250 8.8 1.2
24.0 1000 17.6 2.4
5.0 30
3.75 0.7
12.0 150 8.8 1.2
24.0 600 17.6 2.4
±10% @ 20˚C @ 20˚C @ 20˚C
Contact Ratings Switching Voltage Switching Current Carry Current Contact Rating Life Expectancy Contact Resistance Contact Resistance Stability
Volts Amps Amps Watts
x106 Cycle mΩ mΩ
7500 3.0 4.0 50 100 200 20
10000 3.0 4.0 50 100 200 20
Max DC/Peak AC resistance Max DC/Peak AC resistance Max DC/Peak AC resistance(@30˚C) Max DC/Peak AC resistance @ 1V 10mA Max initial @ operate voltage Max initial @ operate voltage
Relay Specifications
Insulation Resistance
Dielectric Strength
(Static) Operate Time (Including Bounce) Release Time
Ω Min Ω Min
VDC Min VDC Min
msec Max
msec Max
1013
1013
10000 10000
3.0
1.5
1013
1013
15000*
15000
3.0
1.5
Between contacts Contacts to coil @ 100V 20˚C 65%RH Between contacts Contacts to coil @ nominal coil voltage 100 Hz square wave Diode suppression
Measurement Reference Conditions Environmental Ratings Temp: 15˚C to 35˚C Humidity: 25% to 75%RH Atmospheric Pressure: 860 to 1060hpa
Storage temp: -40˚C to +85˚C Operate temp: -20˚C to +80˚C Vibration: 20G’s to 2000Hz Shock: 50G’s
=05(5.0VDC), 12(12.0VDC), 24(24.0VDC)
* Terms/Conditions of Dielectric Strength: Polarity required as pin#1(+) and pin#2(-) for 15KV dielectric strength between contacts.
14
HA705-110/115
(2.697)68.5
MAX
(1.0)25.4
+0.3-0.3
1 2
All Dimensions are mm (inch)
(1.0)25.4
+0.3-0.3
(4-Ø0.031)4-Ø0.8
(0.768)19.5
MAX
(0.2)5.08
+0.3-0.3
(0.2)5.08
+0.3
)621. 0(3.2
P1
P2
-0.3
)420.0(6.0
) 787. 0(0. 02
MAX
P1
P2
21
15
PRODUCT DESCRIPTIONS
The HA706 series with dimensions of 68.5x19.5mm are designed withsignal pins, with high breakdown voltage cables, extending out from theside of its body. This series has coil voltage options of 5.0/12.0/24.0V and dielectric strength options of 10.0/15.0KV and can be adopted tofollow our customer’s specific design requirements.
- Breakdown Voltage 10.0/15.0KV- Contact Rating 50W- Switching Voltage up to 10.0KV- Carry Current 4.0A- Reliability 10 Cycle
HA706 Series PCB Mount / High Breakdown
SPECIFICATIONS
Ordering Code: HA706-110 , HA706-115
HA706 Series HA706-110 HA706-115
Parameters Units 1 Form A Test Conditions Coil Specifications Nominal Coil Voltage Coil Resistance Operate Voltage Release Voltage
VDC Ω
VDC Max VDC Min
5.0 45
3.75 0.7
12.0 250 8.8 1.2
24.0 1000 17.6 2.4
5.0 30
3.75 0.7
12.0 150 8.8 1.2
24.0 600 17.6 2.4
±10% @ 20˚C @ 20˚C @ 20˚C
Contact Ratings Switching Voltage Switching Current Carry Current Contact Rating Life Expectancy Contact Resistance Contact Resistance Stability
Volts Amps Amps Watts
x106 Cycle mΩ mΩ
7500 3.0 4.0 50 100 200 20
10000 3.0 4.0 50 100 200 20
Max DC/Peak AC resistance Max DC/Peak AC resistance Max DC/Peak AC resistance(@30˚C) Max DC/Peak AC resistance @ 1V 10mA Max initial @ operate voltage Max initial @ operate voltage
Relay Specifications
Insulation Resistance
Dielectric Strength
(Static) Operate Time (Including Bounce) Release Time
Ω Min Ω Min
VDC Min VDC Min
msec Max
msec Max
1010
1012
10000 10000
3.0
1.5
1010
1012
15000*
15000
3.0
1.5
Between contacts Contacts to coil @ 100V 20˚C 65%RH Between contacts Contacts to coil @ nominal coil voltage 100 Hz square wave Diode suppression
Measurement Reference Conditions Environmental Ratings Temp: 15˚C to 35˚C Humidity: 25% to 75%RH Atmospheric Pressure: 860 to 1060hpa
Storage temp: -40˚C to +85˚C Operate temp: -20˚C to +80˚C Vibration: 20G’s to 2000Hz Shock: 50G’s
=05(5.0VDC), 12(12.0VDC), 24(24.0VDC)
8
* Terms/Conditions of Dielectric Strength: Polarity required as pin#1(+) and pin#2(-) for 15KV dielectric strength between contacts.
16
HA706-110/115
(2.697)68.5
MAX
1
All Dimensions are mm (inch)
(3-Ø0.031)3-Ø0.8
P1
(1.673)42.5
+0.3-0.3
P2
(0.768)19.5
MAX
)787.0(20.0
MAX
)420.0(6.0
) 621. 0(2. 3
(0.394)10.0
+0.3-0.3
UL 3239 AWG22Silicone High-Voltage wire
(11.811)300
MIN
(11.811)300
MIN
(0.64)16.25
2
NC
P1
P2
NC
21
17
PRODUCT DESCRIPTIONS
The HA707 series has a unique design for signal pins and coil pins whichare extending out from the relay’s body with cables. It has a screw mount for improved stability. The HA707 series has coil voltage options of5.0/12.0/24.0V and dielectric strength options of 10.0/15.0KV and can beadopted to follow our customer’s specific design requirements.
HA707 Series PCB Fix / High Breakdown
SPECIFICATIONS
8
Ordering Code: HA707-110 , HA707-115
HA707 Series HA707-110 HA707-115
Parameters Units 1 Form A Test Conditions Coil Specifications Nominal Coil Voltage Coil Resistance Operate Voltage Release Voltage
VDC Ω
VDC Max VDC Min
5.0 80
3.75 0.7
12.0 250 8.8 1.2
24.0 600 17.6 2.4
5.0 30
3.75 0.7
12.0 120 8.8 1.2
24.0 400 17.6 2.4
±10% @ 20˚C @ 20˚C @ 20˚C
Contact Ratings Switching Voltage Switching Current Carry Current Contact Rating Life Expectancy Contact Resistance
Volts Amps Amps Watts
x106 Cycle mΩ
7500 3.0 4.0 50 100 500
10000 3.0 4.0 50 100 500
Max DC/Peak AC resistance Max DC/Peak AC resistance Max DC/Peak AC resistance(@30˚C) Max DC/Peak AC resistance @ 1V 10mA Max initial @ operate voltage
Relay Specifications
Insulation Resistance
Dielectric Strength
(Static) Operate Time (Including Bounce) Release Time
Ω Min Ω Min
VDC Min VDC Min
msec Max
msec Max
1010
1010
10000 10000
5.0
5.0
1010
1010
15000*
15000
5.0
5.0
Between contacts Contacts to coil @ 100V 20˚C 65%RH Between contacts Contacts to coil @ nominal coil voltage 100 Hz square wave Diode suppression
Measurement Reference Conditions Environmental Ratings Temp: 15˚C to 35˚C Humidity: 25% to 75%RH Atmospheric Pressure: 860 to 1060hpa
Storage temp: -40˚C to +85˚C Operate temp: -20˚C to +60˚C Vibration: 20G’s to 2000Hz Shock: 50G’s
=05(5.0VDC), 12(12.0VDC), 24(24.0VDC)
- Breakdown Voltage 10.0/15.0KV- Contact Rating 50W- Switching Voltage up to 10.0KV- Carry Current 4.0A- Reliability 10 Cycle
* Terms/Conditions of Dielectric Strength: Polarity required as pin#1(+) and pin#2(-) for 15KV dielectric strength between contacts.
18
HA707-110/115
1
All Dimensions are mm (inch)
P1 P2
2
85.7
17.4
150
9.0
2.0150
75.0
(0.354)
(5.906)
MIN
(3.374)
MAX
(0.68
3)
(5.906) (0.079)
(2.953)+0.3-0.3
P1 P2
MIN
2-Ø0.6(2-Ø0.024)
24.0
(0.94
5)+ 0.3
-0.3
34.7
(1.36
6)
19.7
(0.77
6)
3.5(0.138)
0.01 (0.39
4)+2.0 0. 2-
200)478.7(
MIN
10.0(0.394)
+2.0-2.0
1 2 2.81)717. 0(
MAX
2x15.0[2x0.591]
2-Ø4.5(2-Ø0.177)
*2 *3
MAX
5.35
(0.21
1)
5.35(0.211)
43.43.0(0.118) (1.707)
UP
*2
*1
*1
*1
*1 *1 10.0(0.394)
+2.0-2.0
*1 : REFERENCE VALUE*2 : UL 3239 AWG22 SILICONE HIGH-VOLTAGE WIRE *3 : FEP WIRE
19
PRODUCT DESCRIPTIONS
The HA708 series contains mercury and is thus suitable for ESD testcircuits. With no chattering/bounce during operation, the HA708 isable to meet the specifications for ESD wave analysis and waveanalysis equipment. The HA708 series has coil voltage options of5.0/12.0/24.0V.
- Breakdown Voltage 9.0KV- Contact Rating 250W- Switching Voltage up to 8.0KV- Carry Current 10.0A- Reliability 10 Cycle
HA708 Series PCB Fix/MercuryHigh Breakdown
SPECIFICATIONS
8
HA708 Series HA708-109
Parameters Units 1 Form A Test Conditions Coil Specifications Nominal Coil Voltage Coil Resistance Operate Voltage Release Voltage
VDC Ω
VDC Max VDC Min
5.0 20
3.75 0.7
12.0 100 8.8 1.2
24.0 300 17.6 2.4
±10% @ 20˚C @ 20˚C @ 20˚C
Contact Ratings Switching Voltage Switching Current Carry Current Contact Rating Life Expectancy Contact Resistance Contact Resistance Stability
Volts Amps Amps Watts
x106 Cycle mΩ mΩ
8000 5.0 10.0 250 1000 50 2
Max DC/Peak AC resistance Max DC/Peak AC resistance Max DC/Peak AC resistance(@30˚C) Max DC/Peak AC resistance @ 1V 10mA Max initial @ operate voltage Max initial @ operate voltage
Relay Specifications
Insulation Resistance Dielectric Strength (Static) Operate Time (No Bounce) Release Time
Ω Min Ω Min
VDC Min VDC Min
msec Max
msec Max
1010
1010
9000 9000
10.0
6.0
Between contacts Contacts to coil @ 100V 20˚C 65%RH Between contacts Contacts to coil @ nominal coil voltage 20 Hz square wave Diode suppression
Measurement Reference Conditions Environmental Ratings Temp: 15˚C to 35˚C Humidity: 25% to 75%RH Atmospheric Pressure: 860 to 1060hpa
Storage temp: -20˚C to +80˚C Operate temp: -10˚C to +60˚C Vibration: 20G’s to 2000Hz Shock: 50G’s
Ordering Code:
HA708-109
=05(5.0VDC), 12(12.0VDC), 24(24.0VDC)
85.7
17.4
150
9.0
2.0150
75.0
(0.354)
(5.906)
MIN
(3.374)
MAX
(0.68
3)
(5.906) (0.079)
(2.953)+0.3-0.3
P1 P2
1 2
P1 P2
Note: Hg wet contacts must be mounted within 30 of vertical plane.
20
MIN
All Dimensions are mm (inch)
2-Ø0.6(2-Ø0.024)
24.0
(0.94
5)+ 0.3
-0.3
34.7
(1.36
6)
19.7
(0.77
6)
3.5(0.138)
0.01 (0.39
4)+2.0 0. 2-
200)478.7(
MIN
10.0(0.394)
+2.0-2.0
1 2 2.81)717. 0(
MAX
UP
2x15.0[2x0.591]
2-Ø4.5(2-Ø0.177)
*2 *3
MAX
5.35
(0.21
1)
5.35(0.211)
43.43.0(0.118) (1.707)
UP
*2
*1
*1
*1
*1 *1 10.0(0.394)
+2.0-2.0
*1 : REFERENCE VALUE*2 : UL 3239 AWG22 SILICONE HIGH-VOLTAGE WIRE *3 : FEP WIRE