HEVAC COMES UP TOPS FOR HSEwith a complete packaged boiler solution!

HEVAC’S PACKAGED PLANT ROOM YOUR ONE STOP SOLUTION FOR....

• Heating plant

• Hot water generation

• Pumps, boosters and pressurisation sets

• Generator plant

• Gas detection and pressure proving

• Steam plant for heating or process systems

• Combined heat & power (CHP)

• Industrial chimney design and installation

• District heating, design and supply

For information on a Hevac Packaged Plant Room for your next job talk to the Hevac team:

Muirfield Drive, Naas Road, Dublin 12, Ireland. T: +353 1 419 1919 F: +353 1 458 4806

Unit L, Furry Park Industrial Estate, Santry, Dublin 9. T: +353 1 842 7037 F: +353 1 842 7045

South Ring West Business Park, Tramore Road, Cork. T: +353 21 432 1066 F: +353 21 432 1068

E: info@hevac.ie

www.hevac.ie

Your number one heating supplierPartners with

ALIGNED WITH THE BESTThe plant room incorporates two De Dietrich Innovens MCA 90 wall hung gas boilers c/w Duomo Gas Detection, Wilo circulating pumps and pressurisation unit, all pipe and fittings supplied from Hevac’s warehouse in Dublin.

DE DIETRICHThe number one and largest brand in the BDR Thermea Group, De Dietrich has been delivering pioneering heating technology solutions for nearly 250 years. Their products include residential, commercial and industrial boilers, solar and a full range of renewable equipment. Tailor-made solutions for all commercial heating projects with a building approach developed hand in hand with the client. De Dietrich is committed to new heating technologies that can play a major role in tackling climate change.

Positioned

Build Delivery Offloading

PipeworkDe Dietrich Boilers

Pumps & Pipework Handover DocumentsDesign & Drawing

Hevac offers a comprehensive survey, design and installation service for all commercial and industrial flue systems that includes technical support,

chimney sizing and complete on-site installation.

THE TASKTo design and install a new boiler house for St. Mary’s Hospital, Phoenix Park, Dublin.

THE CHALLENGETo keep the hospital operating at peak capacity and efficiency throughout the project. Core facilities and heating system also to remain fully operational. To this end, the HSE appoint Hevac’s Commercial and Industrial Division. Aware that Hevac have over 40 years expertise in the industry, the HSE feel confident that they will deliver a highly efficient solution incorporating the very latest component innovation and energy saving technology.

THE SOLUTIONAfter careful consideration, Hevac’s Commercial & Industrial Division decide that their Boiler House Package Plant Room would work best for the St Mary’s project. Hevac’s internal design and engineering team produce AutoCAD drawings for client approval and complete the entire design and build program to client specifications. They demonstrate the advantages of opting for one complete plant room package to be delivered on-site.

KEY BENEFITS INCLUDE:• A reduction in on-site labour

• Less disruption from the usual general construction and elimination of possible damage by other trades

• Minimum downtime of plant productivity

• A reduction in the cost of premium site space

Work on building a Hevac Plant Room can also commence in tandem with main construction work and remain unaffected by on-site influences such as weather, health & safety issues and unforeseen disruptions. A construction site is far from ideal to construct and install a plant room and the benefits of undertaking work in a clean and dedicated factory environment invariably results in a better quality plant room.

“In our continued drive to be the number one in the industry, we are constantly extending our offer. The Package Plant Room is an obvious extension to this. More and more new build and refurbishment projects are being designed with pre-fabricated, off-site plant room which provides the optimum solution, is ultimately more cost effective and arrives fully tested and ready for final installation,”

Karl Carrick, Hevac Director

“The Packaged Plant Room allowed us to replace a costly temporary unit with an efficient modern solution without disruption to patients.”

Nicholas McGrath, HSE

THE CLIENT

Quality & Testing: After each stage of work the Package Plant Room is signed off, a final check on completion takes place and a certificate issued.

Delivery & Installation: The manufacturing programme is agreed and delivered on time to site, allowing site operations to run unaffected.

Handover & Commission: Plant operation and maintenance manuals and plant commission reports issued on completion of commission.

Top 5 reasons for choosing Hevac Package Plant Rooms:

1. Factory controlled quality

2. Speed of build through use of production efficiencies

3. Tailored specification to meet client requirements

4. Reduction in on-site waste, theft and accidental damage

5. Delivery of Package Plant Rooms to meet client’s construction schedule

PACKAGED PLANT ROOM SPECIFICATIONRef: TS 001 Equipment: LPHW BOILERS, HW HEATERS & FLUE

Issue Date: 18.04.12 Supplier: HEVAC Ltd.

GENERAL DESCRIPTION OF EQUIPMENT OFFERED FOR SPECIFICATION APPROVAL:HEVAC are delighted to offer a complete bespoke Packaged Plant Room designed to meet client site requirements.

Each Packaged Plant Room can be supplied with a range of quality mechanical products including DeDietrich, Hamworthy or ICI Caldaie boilers, Wilo pumps, State water heaters and Duomo gas detectors.

Drawing: Full CAD drawings Drawing Ref: 074 AB

SPECIFICATION TYPICAL MECHANICAL PLANT SPECIFICATION

CONSTRUCTIONPackaged Plant Room complete with architectural composite panel pitched roof with gutters and downpipes

Base frame: Built on galvanised U section construction. Base frame to be 150 x 75mm channel with support framework, 40 x 40mm

Main frame: Framework 50 x 50mm Steel construction

Flooring: 3mm checker plate floor

Outer panel: Kingspan Galfan panel, 0.4mm

Insulation: 45mm Kingspan insulated panel

Inner panel: Kingspan white Galfan panel, 0.4mm

Outer skin Colour: Goose wing grey

Lifting: 4 No. removable lifting eyes for transport and positioning

LIGHTINGInternal fluorescent tube electrical lighting. Emergency lighting as required

ACCESS Lockable door c/w ventilation grille and emergency push bar

VENTILATION Ventilation grilles and louvres

CONTROLBespoke MCC Control Panel for all plant and isolation. Panel complete with emergency push button

FIRE SUPPRESSION Fire extinguisher

Gas slam shut valve and detection sensors

External strobe and audible alarm

ID LABELSDirection labelling & aluminium cladding of all plant items, header kit and pipe work

Valve tags and laminated valve chart mounted

Laminated plant schematic and drawing mounted

MANUALS O&M Manuals and drawings fixed to plant room wall

SPECIFICATION TYPICAL MECHANICAL PLANT SPECIFICATION

BOILERS4 x De Dietrich MCA115, rated at 18.4-114kW 40/30°C or 16.6-107kW at 80/60°C

FLUE 4 x De Dietrich Vertical flue kits

4 x 1000mm flue extensions

PUMPS 4 x Wilo Shunt Pump, Top S 25/7 single phase

GAS DETECTION 1 x Duomo GS100M gas detection panel

1 x Duomo SGM595 natural gas sensor

1 x 1 1/2 inch 150SV gas slam shut valve

1 x audible flashing gas alarm

SYSTEM EXPANSION 1 x 500 litre expansion vessel

1 x 10 litre dosing pot

CONTROLS 4 x indoor sensors

1 x 3-way valve flow probe

1 x PCB 3-way valve and sensor

3 x AD134 bus cables

1 X AD218 cascade sensor

CIRCULATION 1 x Top SD 65/15 circulating pump (Three phase-400V) (Pre 2013)

SPECIFICATION NOTES

NOTE 1 Hevac will deliver and position the plant room on-site with qualified personnel responsible for craning where necessary. Cranage and specialist lifting available if required

NOTE 2 Full Health & Safety survey available on request for positioning

NOTE 3 Method Statement and Risk Assessment, issue on request

NOTE 4 Site survey and plinth dimensioning and drawings available

NOTE 5 Final connections and full commissioning available

NOTE 6 12 months defects and warranty post commissioning date

NOTE 7 Manufactured and supplied by HEVAC Ltd., Muirfield Drive, Naas Road, Dublin 12. T: +353 1 419 1919

Tel: 353 1 419 19 19 | Email: info@hevac.ie

Hevac’s reputation has always been one of strength in respect of the scope and diversity of our product portfolio, and is also complimented by a work force representing vast experience, practical know how and technical excellence.

Hevac, through our vast product range and in conjunction with our sister companies offer an unrivalled design and supply capability on projects from residential schemes through to large industrial steam systems to district heating and other renewable energy projects.

www.hevac.ie

Exclusive Agent of

Company Profile

Hevac Limited is one of Ireland’s leading heating suppliers, renewable energy and district heating specialists. We operate in offices and warehouse facilities in Dublin and Cork comprising over 10,000 square meters of space. We design and supply fully engineered heating systems and renewable energy solutions to the residential, commercial and industrial sectors and offer in house specialists including building services engineers, AutoCAD technicians and system specialists.

The focus of Hevac Limited is to provide quality solutions that lower energy costs, whilst offering maximum efficiency and comfort . We ensure both domestic and commercial projects are as energy efficient as possible and comply with all necessary energy regulations, guaranteeing a reduced carbon footprint.

Hevac Limited are part of the “Hevac Group” which comprises Origen Energy Limited, Tube Company of Ireland Limited and Polytherm Heating Systems Limited. Hevac have 40 year’s of market experience and is the number one independent heating supplier in Ireland. Hevac’s reputation has always been one of strength in respect of the scope and diversity of our product portfolio, and is also complimented by a work force representing vast experience, practical know how and technical excellence.

Hevac, through our vast product range and in conjunction with our sister companies offer an unrivalled design and supply capability on projects from residential schemes through to large industrial steam systems to district heating and other renewable energy projects and has the full backing and support of all group companies as it endeavors to build on the market leading position it occupies.

Hevac Services

• Expert customer service and technical support

• Comprehensive training on all our products

• Design and full AutoCAD service

District Heating

• Consultancy and technical assistance for design, sizing and selection of plant and network pipe, fittings, and components.

• Complete system tailoring of your district heating scheme matching client’s specific requirement.

• Number one supplier for the complete district heating system from design, heat generation and transmission pipework to final metering and billing of the energy / heat usage of the end-user.

Hevac Products • Condensing Gas & Oil Boilers

• Oil, Gas & Electric Steam Boilers

• Modular & Modulating Boilers

• Oil Gas & Dual Fuel Burners

• Gas Detection Equipment

• Gas Pressure Proving Equipment

• Air & Dirt Seperators

• Gas & Oil Fired Water Heaters

• Direct & Indirect Air Heaters

• Stainless Steel Flue Systems

• Pumps & Boosters

• Solar Thermal Heating

• District Heating

• Biomass Heating

• Geothermal Heating

• Air Source Heat Pumps

• Heat Recovery Ventilation

• Underfloor Heating Systems

• Controls, Actuators & Gauges

• Acoustic & Thermal Insulation

• Cast Iron, & Tubular Radiators

• Steel Panel Radiators & Valves

• Fan Coil Units

• Water & Heat Meters

• Temperature & Pressure Gauges

• Tools & Workwear