helutop easy
DESCRIPTION
Helutop easyTRANSCRIPT
Perfect for cabinets –Simplify your installations!
HELUTOP® EasyThreadless cable gland for simple and quick assemblywithout any tools
Cable Accessories
Available in Ø16 and Ø20Coming soon: Ø25 and Ø32
HELUTOP® Easy
Advantages
Assembly - so easy Disassembly - almost as easy
With the new HELUTOP® Easy cable gland conventional
fastening techniques like threaded holes and locknuts are
unnecessary. A unique, patented spring/snap system allows
for quick and easy installation in hard-to-reach areas and in
no-access spaces where locknuts can’t be used. No tools are
required.
Fastening the gland by hand achieves the same tight fi t com-
pared to traditional glands held in place with locknuts.
Thanks to short installation times and no need for threaded
holes and locknuts, the HELUTOP® Easy offers substantial
savings.
No tools required for installation
No threaded holes required
No locknuts required
Same clamping range as HELUTOP HT-Series
VDE-according to DIN EN 62444
Gland and cable will be fi xed with clockwise thread
Installation in tight areas and no-access spaces (locknut side)
Assembly: push cable gland in and turn clockwise – can be done by hand
Cable gland fi ts as tightly as traditional gland held in place with threaded hole or locknut
Hexagon of body and cap are same SW
Large wall thickness range: 0,5 - 4,0 mm
Quick and easy disassembly with seperate tool. No damage to cable gland or wall.
1 Push gland into opening
2 Tighten gland clockwise – fi nished
1 Loosen the gland by pressing the disassembly tool
on the closure
2 Pull out gland – fi nished
1
1
2
Technical DataMaterial
Body: PA 6
Cap: PA 6
Seal: CR
Washer: CR
Quick fi tting lower body: PA 6
Flammability: V2 (acc. to UL 94)
Protection class: IP66 / IP68 - 5 Bar
Operating temperature: -20°C up to +100°C
(intermittent: -30°C up to +150°C)
Approval: VDE acc. to DIN EN 62444
Other colours on request
Grey RAL 7001, black RAL 9005, red RAL 3020,
white RAL 9003, blue RAL 5015
Part No. Hole ømm
Wall thick-ness EMin-Max mm
Clamping range øMin-Maxmm
TLmm
TDmm
SW1mm
SW2mm
Max. Hmm
Unit
908054 16,3 +/-0,1 0,5 - 4,0 5,0 - 10,0 9,0 16,0 22 22 42,3 100
908055 20,3 +/-0,1 0,5 - 4,0 6,0 - 12,0 9,0 20,0 24 24 40,8 50
908056 Disassembly tool for Ø16 and Ø20
Available in Ø16 and Ø20 (corresponds to M16 and M20)
More sizes coming soon: Ø25 and Ø32
HELUKABEL® GmbH · Headquarters · Dieselstraße 8-12 · 71282 Hemmingen · Tel. +49 7150 9209-0 · Fax +49 7150 81786 · [email protected]
WM
/HEL
UTO
P Ea
sy/1
0.20
14/2
.500
/EN
/CEW
E
helukabel-group.com
Company
Contact
Customer number (optional)
Street, No.
Zip, City
Telephone / Fax
Your message
Yes, please include me in the mailing list for the HELUKABEL® e-mail newsletter.(please check)
Find your local HELUKABEL offi ce at www.helukabel-group.com
Part No. Required amount /unit
908054
908055
908056
Get a quote