height safety - stainless steel worx€¦ · height safety height • harnesses • lanyards •...

h e i g h tSAFETYh e i g h tSAFETY

• Harnesses• Lanyards• Height Safety Kits• Fall Prevention• Anchor Points• Chemical Anchoring• Safety Lines• Rope Accessories & Hardware

www.stainlesssteelworx.com.auPh 02 4751 9266 Fax 02 4751 9233

SSW

-HS-

10-1

2-1

ELEVATEDWORK PLATFORM

LADDER CLIMBING

TREESURGEON

TOWERHARNESS

ABSEILING

RESCUE ROOFING SCAFOLDING& RIGGING

CONSTRUCTION& MAINTENANCE

ELECTRICALUTILITIES

FREE FALLARREST

RETRIEVALCONFINED SPACES

RESTRAINED FALLPOLE STRAP

Attachment Points and ApplicationsHARNESSES

All B-Safe Harnesses are designed and manufactured to exceed the requirements of AS/NZS 1891.1 2007. Utilising only the finest components we have forged a hard earned reputation for the design, manufacture and supply of superior fall prevention and rescue equipment.

Beaver Brands have a broad range of Harnesses designed with the requirements of an end user in mind, allowing for maximum comfort and to ensure an even distribution of fall arrest forces.

Prior to the final inspection each product is individually proof loaded to 7.5KN (750Kg) to verify the integrity of the construction and configuration. All metal hardware used on B-Safe products are batch numbered, tested and fully traceable. It is this attention to detail that allows B-Safe to provide peace of mind to our valued clients.

Beaver Brands produces a wide range of specialty harnesses for a wide range of applications. For your convenience weicons have been derived, to readily identify each harnesses’ attachment points and its applications.


Online Ordering is Here!For the easiest way to browse and buy your

Height Safety products & more, visit our websiteonline at: www.ssworx.com.au/products

. beaver.com.au

Computer controlled stitchpattern gives uniformity

All metal components batchnumbered for full traceability

High tenacity UV stabilisedpolyester webbing

Chest strap keeps shoulderstraps correctly located

Fall arrest attachment pointsshown in park position

Sub pelvic strap preventsharness ‘peeling’ off the bodyin the event of a backwards,crouched fall position

All buckles adjust easily

Webbing tidies (Keepers)

Breathable mesh panel givesthe harness form and aids incorrect donning

ATTACHMENTPOINTS

HARNESSESALL PRICES EX GST

ITEMCode MET-030000 $148.00

EA TopSeller!

Trauma Suspension Straps

FeaturesLightweight and comfortable.Rear attachment point.Front attachment points.Fully adjustable leg, shoulder and chest straps.

Applications and UsageFall Arrest – Use in conjunction with an energyabsorbing lanyard or inertia reel device attached tothe Front Loops or rear Dee ring.Restraint Technique – Use in conjunction with anenergy absorbing lanyard to rear Dee ring or frontloops to limit access to fall situations.Recovery & Rescue – Using both front loopsconnected together.



HARNESSES



Adjustable waist belt, fittedwith work positioning sideDees rings for working withpole straps








ATTACHMENTPOINTS

Computer controlled stitch patterngives uniformity








Fall arrest indicator

Extension strap on large“stand off” rear Dee


ATTACHMENTPOINTS

FeaturesLightweight and comfortable.Rear attachment point with extension strap.Front attachment loops.Fully adjustable leg, shoulder and cheststraps.Applications and UsageFall Arrest – Use in conjunction with anenergy absorbing lanyard or inertia reeldevice attached to the Front Loops, rear Deering or rear extension.Restraint Technique – Use in conjunction with energy absorbing lanyard torear Dee ring, rear extension or front loops to limit access to fall situations.Recovery & Rescue – Using both front loops connected together.

FeaturesLightweight and comfortable.Front & rear attachment points.Side ‘Dee’ for work positioning.Fully adjustable leg, shoulder, chest andwaist straps.Applications and UsageFall Arrest – Use in conjunction with anenergy absorbing lanyard or inertia reeldevice attached to the Front Loops or rearDee ring.Restraint Technique – Use in conjunction with an energy absorbing lanyardto rear Dee ring or front loops to limit access to fall situations.Work Positioning – Side Dees for use with a Pole Strap.Recovery & Rescue – Using both front loops connected together.

ALL PRICES EX GSTITEMCode MET-030001 $183.00

EA


EA


HARNESSES

.




Integrated 2.5m Pole Strap

Waist belt with side Dee’s &Large back/lumbar support for comfort

Buckles fully open forunhindered first aid


Extension strap on the large “standoff” rear Dee

Fall arrest indicator



Buttock strap for comfortablesuspended support




Confined space tab / loops

ATTACHMENTPOINTS

Computer controlled stitch pattern gives consistent uniformity

All metal components batch numbered for full traceability


Tool loops (on the outside ofthe back support pad)

Fall Arrest Dee’s

Padded thigh straps



Breathable mesh panel gives the harness form and aids in correct donning

Side ‘D’ rings

Large back/lumber support for comfort

Adjustable leg height straps

ATTACHMENTPOINTS

Extension strap with Dee attachment point

Confined space rescue loops / tabs

FeaturesBuilt in padded back support.2.5m pole strap.Built in bum strap.Rear ‘Dee’ ring rear connection on extension strap.Side ‘Dee’ rings for attachment devices.Fully adjustable leg, shoulder, waist andchest straps.Applications and UsageFall Arrest – Use in conjunction with an energy absorbing lanyard or inertia reel device attached to the Front Loops, rear extension or rear Dee ring.Restraint Technique – Use in conjunction with an energy absorbinglanyard to rear Dee ring, rear extension or front loops to limit access to fall situations.Work Positioning – via side Dees using a pole strap.Confined Space – Rescue & recovery.Recovery & Rescue – Using both front loops connected together.

ALL PRICES EX GST

FeaturesBuilt in padded back support.Padded thigh straps. Tool Loops.Fall arrest rated attachment Dee incorporatedonto long extension strap for ease of connection.Side ‘Dee’ rings. Front fall arrest Dees.Confined space recovery loops.Fully adjustable thigh, shoulder, and waist straps.Applications and UsageAbseiling – Use the front Fall Arrest Dee rings.Fall Arrest – Use in conjunction with shock absorbing lanyard or inertia reel device attached to the front Dees or rear extension.Restraint Technique – Use in conjunction with energy absorbing lanyard to front or rearattachment points.Work Positioning – Use in conjunction with pole strap or adjustable lanyard attached to both side Dee rings.Confined Space – Work in conjunction with shoulder loops and spreader bar.Available with Stainless Steel fittings on requestAlso available in fire proof, cut resistant Nomex/Kevlar webbing


EA


EA


ENERGY ABSORBING LANYARDS

ALL PRICES EX GST

ITEM CODE DESCRIPTION MATERIAL LENGTH ATTACHMENT HARDWARE PRICE

MET-015414 Energy Absorbing Lanyard 11mm Kermantle Rope 2.0m 2x BSM0007 Snap Hook $124.50



MET-015415 Energy Absorbing Lanyard 11mm Kermantle Rope 2.0m 1x BSM0007 Snap Hook $124.50 1x BSM0008 Scaffold Hook

MET-030043 Energy Absorbing Lanyard 11mm Kermantle Rope 1.5m 1x BSM0007 Snap Hook $124.50 1x BSM0008 Scaffold Hook

MET-015416 Energy Absorbing Lanyard 11mm Kermantle Rope 2.0m 2x BSK0001 Karabiner $106.00

MET-030044 Energy Absorbing Lanyard 11mm Kermantle Rope 1.2m 2x BSK0001 Karabiner $93.00

Options also available with Triple action Karabiners

ROPE LANYARDS

MET-015407 Energy Absorbing Lanyard 45mm Polyester Webbing 2.0m 2x MET-017903 Snap Hook $124.00




MET-015410 Energy Absorbing Lanyard 45mm Polyester Webbing 2.0m 1x MET-017903 Snap Hook $115.25 1x MET-017904 Scaffold Hook

MET-015409 Energy Absorbing Lanyard 45mm Polyester Webbing 1.5m 1x MET-017903 Snap Hook $115.00 1x MET-017904 Scaffold Hook

MET-015412 Energy Absorbing Lanyard 45mm Polyester Webbing 2.0m 2x MET-017900 Karabiner $96.00




WEBBING LANYARDSITEM CODE DESCRIPTION MATERIAL LENGTH ATTACHMENT HARDWARE PRICE

Energy Absorbing Lanyards are tested to AS/NZS1891.1 2007 and are proven to reduce forces in a free fall arrest situation to be in various lengths and different configurations to suit various applications. (Available in webbing, rope and PVC coated wire)




ALL PRICES EX GST

MET-030045 Energy Absorbing Lanyard PVC coated wire 2.0m 2x MET-017903 Snap Hook $124.50




MET-015419 Energy Absorbing Lanyard PVC coated wire 2.0m 1x MET-017903 Snap Hook $120.80 1x MET-017904 Scaffold Hook

MET-030048 Energy Absorbing Lanyard PVC coated wire 1.5m 1x MET-017903 Snap Hook $127.00 1x MET-017904 Scaffold Hook

MET-015420 Energy Absorbing Lanyard PVC coated wire 2.0m 2x MET-017900 Karabiner $112.00

E $134.00NO N ralveK eveelS ralveK


WIRE ROPE LANYARDSWire Rope Lanyards are ideal for use in hot works and when working in other adverse conditions.

MET-015500 Energy Absorbing 45mm Polyester 2.0m 2x MET-017903 Snap Hook $127.00 Adjustable Lanyard Webbing

MET-030050 Energy Absorbing 45mm Polyester 2.0m 1x MET-017903 Snap Hook $124.50 x1gnibbeW draynaL elbatsujdA

MET-030051 Energy Absorbing 45mm Polyester 2m 2x MET-017902 $207.00 renibaraK noitcA elpirTgnibbeWdraynaL elbatsujdA

MET-030052 Energy Absorbing 11mm Kermantle 2m 2x MET-017901 $199.00renibaraK etaG wercS raePepoR draynaL elbatsujdA

MET-030053 Energy Absorbing 11mm Kermantle 2m 2x MET-017902 $246.60 renibaraK noitcA elpirTepoR draynaL elbatsujdA

MET-030054 Energy Absorbing 11mm Kermantle 2.0m 2x MET-017900 $171.00 renibaraK etaG wercSepoR draynaL elbatsujdA

ADJUSTABLE LANYARDSB-Safe’s range of adjustable lanyards are proven to be effective in affording convenient adjustment to alanyard length, allowing a reduction in the free fall distance.


MET-030049

MET-017904 Scaffold Hook


Attachment Points and Applications


WEBBING & ELASTICISED LANYARDS

ITEM CODE WEBBING LANYARDS - TWIN LEG PRICE

MET-015421 1m Webbing Twin Access Energy Absorbing Lanyard c/w 3 x MET-017903 $106.00

MET-030055 1.5m Webbing Twin Access Energy Absorbing Lanyard c/w 3 x MET-017903 $115.00


MET-015423 1.2m Webbing Twin Access Energy Absorbing Lanyard c/w MET-017903 & 2 x MET-017904 $120.00


MET-015425 2m Webbing Twin Access Energy Absorbing Lanyard c/w MET-017903 & 2 x MET-017904 $132.00

MET-030057 2m Webbing Twin Access Energy Absorbing Lanyard c/w MET-017900 & 2 x MET-017904 $129.00



ITEM CODE ELASTICISED LANYARDS - SINGLE LEG PRICE

MET-030060 1m Elasticised Energy Absorbing Lanyard c/w 2 x MET-017903 $105.00

MET-030061 1.5m Elasticised Energy Absorbing Lanyard c/w 2 x MET-017903 $112.00


MET-015427 2m Elasticised Energy Absorbing Lanyard c/w 1 x MET-017903 & 1 x MET-017904 $125.00

MET-030062 1.4m Elasticised Fluoro Yellow Energy Absorbing Lanyard c/w 2 x MET-030082 $100.00

MET-030063 2m Elasticised Violet Energy Absorbing Lanyard c/w 2 x MET-030082 $108.00

ITEM CODE ELASTICISED LANYARDS - TWIN LEG PRICE

MET-030064 2m Elasticised Twin Access Lanyard c/w MET-017903 all ends $162.00

MET-030065 1.5m Elasticised Twin Access Lanyard c/w MET-017903 & 2 x MET-017904 $171.00

MET-015428 2m Elasticised Twin Access Lanyard c/w MET-017903 & 2 x MET-017904 $177.00


MET-030067 2m Elasticised Twin Access Lanyard c/w MET-030076 all ends $217.00


ITEM CODE ELASTICISED LANYARDS - SINGLE LEG C/W TRIPLE ACTION KARABINERS PRICE


ITEM CODE WEBBING LANYARDS C/W TRIPLE ACTION KARABINERS PRICE

MET-030070 1.5m Webbing Energy Absorbing Lanyard c/w MET-017902 each end $149.00

MET-030071 2m Webbing Energy Absorbing Lanyard c/w MET-017902 each end $171.00

MET-030072 2m Kevlar Webbing Energy Absorbing Lanyard c/w MET-017902 each end $310.00

MET-030073 2m Webbing Energy Absorbing Lanyard c/w MET-030076 Karabiner each end $103.00

ITEM CODE TWIN ACCESS WEBBING LANYARDS C/W TRIPLE ACTION KARABINERS PRICE




Twin lanyard permits the user to move around to different anchoring points being attached at all times. All the rules regarding the use of energy absorbing lanyards must be maintained. (Available in webbing, rope & PVC coated wire)

Stainless Steel Worx also provides a range of lanyards fitted with triple action karabiners.

ALL PRICES EX GST


. beaver.com.au

Kit Components: MET-030007 Harness MET-015600 Retracting Lanyard MET-017001 Tie Off Adaptor

Executive Height Safety Kit– suitable for the occasional user to haveall necessary safety equipment to work atheights.

Roofers Kits (For use in all domestic commercial and industrial roof working applications)

Kit Components: MET-030011 HarnessMET-015600 Retracting Lanyard

MET-017302 Pole StrapMET-017305 Attachment Strap

Electrical Safety Kit –for users involved in tower, pole, orelectrical work.

Kit Components: MET-030000 Harness MET-015407 S/A Lanyard MET-030078 140mm Manulink

ConstructionHeight Safety Kit

Kit Components: MET-030000 Harness MET-015407 2m energy absorbing Lanyard MET-016308 Rope and Grab

MET-017204 Attachment Strap MET-017900 Karabiner

– 15m rope,

Roofers Kit

manual rope adjuster, 2m energyabsorbing lanyard and full body harness.


EA


EA


EA


EA

HEIGHT SAFETY KITS

ALL PRICES EX GST


MoreKits Ava

ilable

Please Call!

MET-017901 Steel Screwgate Karabiner Rated to 42kN Gate Opening: 26mm

$12.00

EA

MET-017900 Screwgate Steel Karabiner Minimum breaking load 23kN Gate Opening: 16mm $7.00

EA

FALL PREVENTION

MET-018001 Alloy Screwgate Karabiner Rated to 27kN

Gate Opening: 23mm

MET-018002 Alloy Triplelock Karabiner Rated to 30kN

Gate Opening: 27mm

MET-018004 Alloy Double Action Scaffold HookRated to 22.2kNGate Opening: 60mm

To comply with the requirements of AS/NZS1891.1 all hooks andkarabiners used within height safety systems must have the following features:

• Be self closing

• Requires two deliberate actions to open

• Be rated in excess of 20kN

MET-017903 Double Action hook with safetyguard to prevent accidental opening ofsecond action Minimum breaking load 23kNGate Opening: 19mm

$16.00

EA

MET-017902 Steel Triplelock Karabiner Rated to 50kN Gate Opening: 27mmAlso available in stainless steel $18.00

EA

MET-017904 Steel Double Action Scaffold HookMinimum breaking load 23kN Gate Opening: 55mm

$17.80

EA

MET-030077 Steel Twist Lock Scaffold Hook KarabinerRated to 22kNGate Opening: 56mm $50.00

EA

MET-030076 Steel Triple-lock Karabinerc/w Retaining Pin Minimum breaking load 35kN $22.00

EA

MET-018003 Alloy Double Action hook withsafety guard to prevent accidental opening ofsecond actionRated to 22.5kNGate Opening: 20mm

$56.00

EA

MET-018000 Alloy Screwgate Karabiner Rated to 30kNGate Opening: 22mm $46.00

EA

$50.00

EA

$80.00

EA

$80.00

EA

ALL PRICES EX GST


ANCHOR POINTS

B-Safe 316 Grade Stainless Steel PointsRated at 22kN B-Safe anchor points are designed as permanent purlin mounted anchors. Affording quick and easy installation, B-Safe Anchors aresuitable for commercial, industrial and residential applications. It is important to ensure the structure, to which any anchor is installed, hassufficient strength (refer AS/NZS1891.4) to sustain any applied load.

Low Profile Anchor Bolts Standard Profile Anchor Bolts

MET-017401 Suitable for large flat

pan roof profiles

MET-017404 Suitable for large

flat pan roof profiles

MET-017403 Suitable for corrugate profiles

MET-017405 Suitable for long span profiles

MET-017501 Angle bracket for

timber rafter eyebolt installation

MET-017408 Concrete Anchor

16mm with 150mm thread length (supplied with chemical)

MET-030078 Manulink 140mm Minimum breaking load 22.2kN

MET-017700

Ladder Access Bracket

MET-017506 Anchor point label

MET-017502 Suitable for tile roofs with

timber rafters

MET-017400Suitable for corrugate roof profiles

$65.00

EA

$75.00

EA

$75.00

EA

$85.00

EA

$214.00

EA

$50.00

EA

MET-030900 Adhesive Capsule

for use with Concrete AnchorMET-017408

$16.00

EA

$228.00

EA

$183.00

EA

$168.00

EA

$11.00

EA

$260.00

EA

$52.00

EA

MET-017606

anchor bracket

Temporary roof

ALL PRICES EX GST

Use on its own, or combine with....


For tile or iron.• Engineer Certified to 22kN.• Helps you comply with Aus. Stds AS/NZS 1891, AS 2000.• Simple and quick to install.• Fits almost any beam size.• Includes all fixings and waterseal.• Available for sheet iron or tile roofs.


ANCHOR POINTS

ITEMCode MET-017604 ITEM

Code MET-017602

Vertical beam clamps102mm – 400mm

The Metrix Low Profile Anchor

The Metrix Easyfit Tile Roof Anchor

The Metrix Easyfit Metal Roof Anchor

The Metrix Permanent Timber Rafter Anchor

102mm – 650mm

Horizontal Beam Clamps90mm – 304mm

102mm – 309mm


EA

$928.00

EA


EAITEMCode MET-030507 $50.00

EA


EAITEMCode MET-030509 $65.00

EA


EA

$593.00

EA

• Tested and certified to 22kN.• Stainless steel.• Unobtrusive, low profile design.• Does not create possible leak spots and does not need any flashing.• Very fast and easy to install and doesn’t detract from the strength of the roof structure.

ALL PRICES EX GST


ITEM CODER DESCRIPTION PRICE

MET-030800 Ramset ChemsetTM 101 Single Cartridge $46.50

MET-030801 Ramset ChemsetTM 101 Twin Kit $78.00

MET-030802 Ramset ChemsetTM Pack of 5 Spare Nozzles $20.00

MET-030804 Ramset ChemsetTM 101 Jumbo 750ml $76.00

MET-030806 Ramset UltrafixTM Plus $43.00

. beaver.com.au

CHEMICAL INJECTION ANCHORING

101 Spare Nozzles 101 Single Cartridge 101 Twin Kit

ALL PRICES EX GST

Heavy Duty Silicone Gun


EA

Jumbo - 750ml with 1 x nozzle

Chemset Universal Applicator GunSuits 380ml & 750ml


EA

Includes 2 x nozzles Includes 4 x nozzlesRamset ChemsetTM 101

• 300ml handy size• 2 x nozzles• Suits normal silicone gun

Ramset UltrafixTM Plus

Ring, Faxor Email

Your Order!


Attachment Points

and Applications

VERTICAL SAFETY LINES

$21.00

EA$83.00

EA

LENGTH AND ROPE DIAMETER ROPE ONLY – DOUBLE ACTION HOOK ONE END ROPE WITH DOUBLE ACTION HOOK ONE END AND MANUAL ROPE GRAB

m5 – eltnamnreK mm11

m01– eltnamnreK mm11







m02 – retseyloP mm61

Manual rope grab11mm rope

Manual ropegrab 16mm rope

Auto Openablewith parking features rope grab 16mm rope

Rocker Autoopenable 11mm rope

Other styles are available

Vertical Safety Lines can be set up on a temporary or permanent basis. The purposes of these lines are for climbing structures and being attachedwhilst climbing or traversing the structure. It is important that the top attachment point is suitable for the application and rated accordingly. Whentaking the line off the direct vertical position, users have to be aware of the possible pendulum effect should a slip or fall occur. The safety lineshould be used under tension between the anchor and the rope grab device so that the fall distance is limited to the operational speed of the ropegrab. Various versions of the rope grab are available, types that slide on the end of the rope and require manual releasing to descend andautomatic openable devices that will freely travel up and down the rope.

$354.00

EA$804.00

EA


Code MET-018103 ITEMCode MET-018102 ITEM

Code MET-018104

MET-016300 $102.00

MET-016301 $119.00

MET-016302 $153.00

MET-016303 $161.50

MET-016304 $178.50

MET-016305 $195.50

MET-030080 $221.00

MET-016306 $280.50

MET-016312 $224.00

MET-016307 $127.00

MET-030085 $151.00

MET-016308 $198.00

MET-016309 $219.00

MET-016310 $243.00

MET-016311 $264.00

MET-030086 $287.00

MET-030087 $300.00

MET-016313 $341.00

ALL PRICES EX GST


. beaver.com.au

HORIZONTAL SAFETY LINES

Webbing Temporary Life Lines

An easily installed 20m webbing temporary lifeline provides the

operator the benefit of horizontal mobility. The UV stabilised heavy

duty webbing is tensioned by a ratchet, with any spare webbing

stored in the attached carry bag. Lightweight, easy to handle and its

versatility make the B-Safe Temporarily Horizontal lifeline ideal for

general construction, maintenance and contractors where the

worksite in constantly evolving.

Web Temp Life Line – Suitable for 1 person

Web temp Life Line – Suitable for 1 person, completewith tie off equipment. Easily installed and tensioned

Rope Temporary Life LineA temporary horizontal rope lifeline provides the operator thebenefit of horizontal mobility. Easily tensioned this rugged yetlightweight system is easy to install and suitable for generalconstruction, maintenance and contractors where the workconditions may vary day to day. Rated for two (2) operators. *

MET-030079 – 30m length



Web temporary life line, ratchet tensioning method.

Rope temporary life line being installed and tensioned.


EA


EA

$559.00

EA

$679.00

EA

$839.00

EA

ALL PRICES EX GST



ROPE ACCESSORIES &HARDWARE ITEMS


Code MET-030081


Code MET-018104 ITEMCode MET-017805 ITEM

Code MET-017808


Code MET-017204


Code MET-017800 ITEMCode MET-017801

Rocker Auto Rope Grab10.5 – 13mm 164g

Medium Eiger Pully for usewith 10 – 13mm Rope35kN 158g

Medium Double Eiger Pulleyfor use on 10mm– 13mm rope35kN 286g

Small Manual Rope Grabopenable for use with 10.5 – 13mm rope178g

1.5m Tie Off Adaptor

1.m Tie Off Adaptor

2m Tie Off Adaptor

50m Rope Bag Personal Gear Bag Large Gear Bag

Harness Tool Bag, multicompartment (will fit over padded waist bands)

1.5m Attachment StrapAvailable in lengths from 500mm to 2m

Bolt Bag single compartment

Tool Lanyards secured to wristwith Velcro with snap hook to hold tool.Lengths 500mm,1m, 1.5m and 2m

$85.00

EA

$140.80

EA

$150.00

EA$422.00

EA$7.00

EA$28.00

EA


EA


EA


EA

$17.00

EA

$20.00

EA$23.00

EA$30.00

EA

$30.00

EA

ALL PRICES EX GST


. beaver.com.au

ORDER TODAY


HEAD OFFICE & TRADE COUNTERUnit 2 / 1 Tayler Rd VALLEY HEIGHTS NSWPO Box 439 SPRINGWOOD NSW 2777

Visit us onlinewww.stainlesssteelworx.com.au

Valley Heights

Springwood

BUNNINGS

WE ARE HERE

Peninsula Rd

Peni

nsul

a Rd

Tayler Rd

Great Western Hwy

PHONE 1300 SSWORX

FAX 02 4751 9233EMAIL [email protected]

TRADING HOURS7.30am - 5.00pm Monday to Friday8.00am - 1.00pm Saturday

SALE

VISIT OUR SHOWROOM:

S HOTLINES

Online OrderingNow Available!

02 4751 9266

WORKING AT HEIGHTS

GENERAL TERMINOLOGY USED IN FALL PREVENTION

Restraint Technique – To control a persons movement by meansof a combination of a harness, and an energy absorbing lanyardthat will physically prevent the person from reaching a position at which there is a risk of a free fall.

Restrained Fall – A fall or the arrest of a fall where the personsuffering the fall is partially restrained by a restraining device suchas a pole strap or is sliding down a slope on which it is normallypossible to walk without the assistance of a hand rail or hand line.

Limited Free Fall – A fall or the arrest of a fall where the falldistance prior to the system taking the load, and the maximumdistance of any free fall component will not exceed 600mm.

Free Fall Arrest – A fall or the arrest of a fall where the falldistance before the fall-arrest system begins to take any loading, is in excess of 600mm either vertically or on a slope which is notpossible to walk without assistance of a handrail or hand line.Maximum Free Fall distance permitted is 2m, with a shockabsorbing lanyard. (Please note fall clearance requirements on page 6)

GENERAL PRINCIPLES OF SAFELY WORKING AT HEIGHTS

Work sites today pose hazards that can cause serious harm. The responsibility to end each and every day safely rests not only with your employer but more importantly with yourself. In today's workplace you need to be aware of the hazards that are present and look at the ways that these hazards can be identify.

This principle has been used in many very high risk occupations for some time, and the benefits have been rewarding with a noticeable reduction in accidents statistics. A risk assessment – hazard reduction programme is covered on the previous page and Beaver Brands recommend that all users of height safety equipment, should use a risk assessment programme to identify the hazards that could cause injury.


FALL ARREST CONSIDERATIONS

When using fall arrest type equipment, it is essential that there beadequate clearance under the area of work so that in the event of afall, the user will not strike the ground or any other hazardous objectsduring the fall.

If it is assessed that the occurrence of a fall would endanger the userthen other alternatives of fall protection systems must be considered.This may include the use of shorter shock absorbing lanyards,retracting lanyards or adjustable lanyards. In each case the fallclearance must be identified and the hazards associated with fallclearance eliminated.

With the reduction of free fall distances other benefits can occur, ifthe free fall distance is reduced then the load on the system and theperson could be reduced, also the recovery method and time may besignificantly reduced if the users fall distance is kept to a minimum.

Wherever possible the attachment point for a fall arrest systemshould be located above the users attachment point on the harness,when this is not possible the shock absorbing lanyard length must bereduced to ensure that the maximum fall distance of the user islimited to 2m. A user should never climb above the attachment pointusing a fall arrest shock absorbing lanyard as this only adds to thefree fall distance and consequently adds to the overall shock load onthe system, and the person.

2m shock absorbing lanyard


ORDER FORM

PAYMENT DETAILS:

Cheque - Please post to: PO Box 439 Springwood NSW 2777

Cash / EFTPOS Payment on Pick-up Only

I wish to pay Direct Deposit, BSB 032-837 Account Number 256135

I wish to apply for a 30 day Credit Account, please send application

Please charge my credit card: Visa Mastercard (Credit card payments will incur a 3% surcharge)

:etaD pxE:rebmuN draC

:erutangiS:eman s’redloh draC

CODE

FRT FREIGHT & HANDLING $25.00 STANDARD - ALL OTHER FREIGHT QUOTED

PRODUCT QTY PRICE EA TOTAL (EX. GST)

SEND INVOICE TOCompany Name: __________________________________

ABN: ___________________________________________

Contact Name:____________________________________

Invoice Address:__________________________________________________________________________________

Ph:____________________ Mob: ____________________

Fax: ___________________ Date: ___________________

THANK YOU - WE APPRECIATE YOUR BUSINESS

SUB TOTAL

GST

TOTAL (INC. 10% GST)

Subject to SSW Standard Terms & Conditions. Copy available on request.

ACCOUNT NAME. ORDER NO.

DELIVERY ADDRESS Company Name: __________________________________

Site Contact: _____________________________________

Site Address: _____________________________________

_______________________________________________

Ph:___________________ Mob:_____________________

Date Required: ___________________________________

PLEASE PHOTOCOPY FOR FUTURE USE

SPECIAL DELIVERY INSTRUCTIONS:

**

**

**

PLEASE CALL, FAX OR EMAIL YOUR ORDER TO:

✆

PHONE

02 4751 9266 FAX

EMAIL

Post

Or Pick Up From:

Trading Hours

Mon - Fri: 7.30am - 5pmSaturday: 8.30am - 1pm

02 4751 9233

Unit 2 / 1 Tayler RdValley Heights NSW 2777

[email protected]

Visit us at:www.stainlesssteelworx.com.au

PO Box 439 Springwood NSW 2777

height safety - stainless steel worx€¦ · height safety height • harnesses • lanyards •...

Documents