hartner ts-drills en druckdaten 240816

Precision Cutting Tools

TS-DRILLSCARBIDE SPECIAL PROGRAMME

+ Edition 2016

EN

2

F

F 3

F 3

F 3

F 3

F 11

F 11

F 11

F 11

F 18

F 18

21

F 23

26

29

F 29

29

F 29

TS-Drills, Solid carbide high performance drills

Application recommendations see page 34

bright FIRE with internal coolant

Standard Type Toolmaterial

Surfacefi nisch

Cuttingdirection Coolant Shank

formDrilling depth Diameter range Article no. Page

DIN 6537K TS 100 U Sol. carb. rh HA 3 x D 3,00 - 20,00 89413

DIN 6537K TS 100 U Sol. carb. rh HE 3 x D 3,00 - 20,00 89402

DIN 6537L TS 100 U Sol. carb. rh HA 5 x D 3,00 - 20,00 89414

DIN 6537L TS 100 U Sol. carb. rh HE 5 x D 3,00 - 20,00 89417

DIN 6537K TS 100 U Sol. carb. rh HA 3 x D 3,00 - 20,00 89410

DIN 6537K TS 100 U Sol. carb. rh HE 3 x D 3,00 - 20,00 89415

DIN 6537L TS 100 U Sol. carb. rh HA 5 x D 3,00 - 20,00 89411

DIN 6537L TS 100 U Sol. carb. rh HE 5 x D 3,00 - 20,00 89408

Hartner std. TS 100 U Sol. carb. rh HA 7 x D 3,00 - 20,00 89412

Hartner std. TS 100 U Sol. carb. rh HE 7 x D 3,00 - 20,00 89416

Hartner std. TS 150 GG Sol. carb. rh HA 10 x D 3,00 - 16,00 89293

Hartner std. TS 100 U Sol. carb. rh HA 12 x D 3,00 - 20,00 89418

DIN 6537L TS 3 G Sol. carb. rh HA 5 x D 3,00 - 20,00 89247

DIN 6539 N Sol. carb. rh DZ 3 x D 2,00 - 12,00 89235

DIN 6539 N Sol. carb. rh DZ 3 x D 1,00 - 16,00 89253

Hartner std. N Sol. carb. rh DZ 5 x D 2,00 - 12,00 89244

Hartner std. N Sol. carb. rh DZ 5 x D 1,00 - 12,00 89261

F FIRE

3

3 x D

F

3 x D

F

5 x D

F

5 x D

F

TS-Drills without oil feed

bright

Article no. 89413

alignment accuracy with small diameter toleranceand excellent surface finish. Excellentself-centering qualities as well as producingshort chips thanks to straight cutting pointgeometry with special point grind andweb thinning. Preconditions for use:Powerful machines. No play in spindle bearings. Alignment accurate tool holders. Max. concentricity error of clamped tools: 0.02 mm. Chatterfree, mechanical feeds. The tool is available without whistle notch flat for application in shrink fit or hydraulic chucks.

Standard DIN 6537K

Tool material Solid carbideHigh-performance drill for the drilling of long and short-chipping materials such as structural and case hardened steels, cast steels, heat-treatable steels and alloyed steels with a tensile strength of up to 1200 N/mm², including carbon steels, cast iron and high-alloyed AlSi-alloys. For drilling depths up to 3 x D. Advantages:Highest speed and feed rates (see application recommendations page 40) possible, high

Surface finish

Type TS 100 U

Shank HA

Cutting direction rh

Point grinding 2-facet

Point angle ° 140

Tolerance on Ø m7

Article no. 89402

alignment accuracy with small diameter tolerance and excellent surface finish. Excellent self-centering qualities as well as producing short chips thanks to a straight cutting point geometry with special point grind and web thinning.

Preconditions for use:Powerful machines. No play in spindle bearings. Alignment accurate tool holders. Max. concentricity error of clamped tools: 0.02 mm. Chatterfree, mechanical feeds.

Standard DIN 6537K


Surface finish

Type TS 100 U

Shank HE



Point angle ° 140

Tolerance on Ø m7

Article no. 89414

alignment accuracy with tight tolerance and excellent surface finish. Excellent self-centering qualities as well as producing short chips thanks to a straight cutting point geometry with special point grind and web thinning.

Preconditions for use:Powerful machines. No play in spindle bearings. Alignment accurate tool holders.Max. concentricity error of clamped tools: 0.02 mm. Chatterfree, mechanical feeds. The The tool is available without whistle notch flat for application in shrink fit/hydraulic chucks.

Standard DIN 6537L

Tool material Solid carbideHigh-performance drill for the drilling of long- and short-chipping materials such as structural and case hardened steels, cast steels, heat-treatable steels and alloyed steels with a tensile strength of up to 1200 N/mm², including carbon steels, cast iron and high-alloyed AlSi-alloys. For drilling depths up to 5 x D.Advantages:Highest speed and feed rates (see application recommendations page 40) possible, high

Surface finish

Type TS 100 U

Shank HA



Point angle ° 140

Tolerance on Ø m7

Article no. 89417


Preconditions for use:Powerful machines. No play in spindle bearings. Alignment accurate tool holders.Max. concentricity error of clamped tools: 0.02 mm. Chatterfree, mechanical feeds.

Standard DIN 6537L


Surface finish

Type TS 100 U

Shank HE



Point angle ° 140

Tolerance on Ø m7

4

F

l1

d1 d2

l2 l3

tmax

tmax=l2-1,5 x d1

F F

1/8

9/64

5/32

11/64

3/16

13/64

7/32

15/64

1/4

17/64

TS-Drills without oil feed, 3 x D

bright FIRE

89413 89402

Solid carbide

155 155

HA HE

TS 100 U TS 100 U

d1 d2 l1 l2 l3Availability

mm inch mm mm mm mm

3.000 6.000 62.00 20.00 36.003.100 6.000 62.00 20.00 36.003.170 6.000 62.00 20.00 36.003.200 6.000 62.00 20.00 36.003.250 6.000 62.00 20.00 36.003.300 6.000 62.00 20.00 36.003.400 6.000 62.00 20.00 36.003.500 6.000 62.00 20.00 36.003.570 6.000 62.00 20.00 36.003.600 6.000 62.00 20.00 36.003.700 6.000 62.00 20.00 36.003.800 6.000 66.00 24.00 36.003.900 6.000 66.00 24.00 36.003.970 6.000 66.00 24.00 36.004.000 6.000 66.00 24.00 36.004.100 6.000 66.00 24.00 36.004.200 6.000 66.00 24.00 36.004.300 6.000 66.00 24.00 36.004.370 6.000 66.00 24.00 36.004.400 6.000 66.00 24.00 36.004.500 6.000 66.00 24.00 36.004.600 6.000 66.00 24.00 36.004.650 6.000 66.00 24.00 36.004.700 6.000 66.00 24.00 36.004.760 6.000 66.00 28.00 36.004.800 6.000 66.00 28.00 36.004.900 6.000 66.00 28.00 36.005.000 6.000 66.00 28.00 36.005.100 6.000 66.00 28.00 36.005.160 6.000 66.00 28.00 36.005.200 6.000 66.00 28.00 36.005.300 6.000 66.00 28.00 36.005.400 6.000 66.00 28.00 36.005.500 6.000 66.00 28.00 36.005.550 6.000 66.00 28.00 36.005.560 6.000 66.00 28.00 36.005.600 6.000 66.00 28.00 36.005.700 6.000 66.00 28.00 36.005.800 6.000 66.00 28.00 36.005.900 6.000 66.00 28.00 36.005.950 6.000 66.00 28.00 36.006.000 6.000 66.00 28.00 36.006.100 8.000 79.00 34.00 36.006.200 8.000 79.00 34.00 36.006.300 8.000 79.00 34.00 36.006.350 8.000 79.00 34.00 36.006.400 8.000 79.00 34.00 36.006.500 8.000 79.00 34.00 36.006.600 8.000 79.00 34.00 36.006.700 8.000 79.00 34.00 36.006.750 8.000 79.00 34.00 36.006.800 8.000 79.00 34.00 36.006.900 8.000 79.00 34.00 36.007.000 8.000 79.00 34.00 36.00

5

F

l1

d1 d2

l2 l3

tmax

tmax=l2-1,5 x d1

F F

9/32

19/64

5/16

21/64

11/32

23/64

3/8

25/64

13/32

7/16


bright FIRE

89413 89402

Solid carbide

155 155

HA HE

TS 100 U TS 100 U


mm inch mm mm mm mm

7.100 8.000 79.00 41.00 36.007.140 8.000 79.00 41.00 36.007.200 8.000 79.00 41.00 36.007.300 8.000 79.00 41.00 36.007.400 8.000 79.00 41.00 36.007.500 8.000 79.00 41.00 36.007.540 8.000 79.00 41.00 36.007.600 8.000 79.00 41.00 36.007.700 8.000 79.00 41.00 36.007.800 8.000 79.00 41.00 36.007.900 8.000 79.00 41.00 36.007.940 8.000 79.00 41.00 36.008.000 8.000 79.00 41.00 36.008.100 10.000 89.00 47.00 40.008.200 10.000 89.00 47.00 40.008.300 10.000 89.00 47.00 40.008.330 10.000 89.00 47.00 40.008.400 10.000 89.00 47.00 40.008.500 10.000 89.00 47.00 40.008.600 10.000 89.00 47.00 40.008.700 10.000 89.00 47.00 40.008.730 10.000 89.00 47.00 40.008.800 10.000 89.00 47.00 40.008.900 10.000 89.00 47.00 40.009.000 10.000 89.00 47.00 40.009.100 10.000 89.00 47.00 40.009.130 10.000 89.00 47.00 40.009.200 10.000 89.00 47.00 40.009.250 10.000 89.00 47.00 40.009.300 10.000 89.00 47.00 40.009.400 10.000 89.00 47.00 40.009.500 10.000 89.00 47.00 40.009.520 10.000 89.00 47.00 40.009.600 10.000 89.00 47.00 40.009.700 10.000 89.00 47.00 40.009.800 10.000 89.00 47.00 40.009.900 10.000 89.00 47.00 40.009.920 10.000 89.00 47.00 40.0010.000 10.000 89.00 47.00 40.0010.100 12.000 102.00 55.00 45.0010.200 12.000 102.00 55.00 45.0010.300 12.000 102.00 55.00 45.0010.320 12.000 102.00 55.00 45.0010.400 12.000 102.00 55.00 45.0010.500 12.000 102.00 55.00 45.0010.600 12.000 102.00 55.00 45.0010.700 12.000 102.00 55.00 45.0010.800 12.000 102.00 55.00 45.0010.900 12.000 102.00 55.00 45.0011.000 12.000 102.00 55.00 45.0011.100 12.000 102.00 55.00 45.0011.110 12.000 102.00 55.00 45.0011.200 12.000 102.00 55.00 45.0011.300 12.000 102.00 55.00 45.00

6

F

l1

d1 d2

l2 l3

tmax

tmax=l2-1,5 x d1

F F

15/32

1/2

9/16


bright FIRE

89413 89402

Solid carbide

155 155

HA HE

TS 100 U TS 100 U


mm inch mm mm mm mm

11.400 12.000 102.00 55.00 45.0011.500 12.000 102.00 55.00 45.0011.600 12.000 102.00 55.00 45.0011.700 12.000 102.00 55.00 45.0011.800 12.000 102.00 55.00 45.0011.900 12.000 102.00 55.00 45.0011.910 12.000 102.00 55.00 45.0012.000 12.000 102.00 55.00 45.0012.200 14.000 107.00 60.00 45.0012.500 14.000 107.00 60.00 45.0012.700 14.000 107.00 60.00 45.0013.000 14.000 107.00 60.00 45.0013.500 14.000 107.00 60.00 45.0013.700 14.000 107.00 60.00 45.0014.000 14.000 107.00 60.00 45.0014.200 16.000 115.00 65.00 48.0014.290 16.000 115.00 65.00 48.0014.500 16.000 115.00 65.00 48.0014.700 16.000 115.00 65.00 48.0015.000 16.000 115.00 65.00 48.0015.200 16.000 115.00 65.00 48.0015.500 16.000 115.00 65.00 48.0015.700 16.000 115.00 65.00 48.0016.000 16.000 115.00 65.00 48.0016.500 18.000 123.00 73.00 48.0017.000 18.000 123.00 73.00 48.0017.500 18.000 123.00 73.00 48.0018.000 18.000 123.00 73.00 48.0018.500 20.000 131.00 79.00 50.0019.000 20.000 131.00 79.00 50.0019.500 20.000 131.00 79.00 50.0020.000 20.000 131.00 79.00 50.00

7

F

l1

d1 d2

l2 l3

tmax

tmax=l2-1,5 x d1

F F

1/8

9/64

5/32

11/64

3/16

13/64

7/32

15/64

1/4

17/64


bright FIRE

89414 89417

Solid carbide

155 155

HA HE

TS 100 U TS 100 U


mm inch mm mm mm mm

3.000 6.000 66.00 28.00 36.003.100 6.000 66.00 28.00 36.003.170 6.000 66.00 28.00 36.003.200 6.000 66.00 28.00 36.003.250 6.000 66.00 28.00 36.003.300 6.000 66.00 28.00 36.003.400 6.000 66.00 28.00 36.003.500 6.000 66.00 28.00 36.003.570 6.000 66.00 28.00 36.003.600 6.000 66.00 28.00 36.003.700 6.000 66.00 28.00 36.003.800 6.000 74.00 36.00 36.003.900 6.000 74.00 36.00 36.003.970 6.000 74.00 36.00 36.004.000 6.000 74.00 36.00 36.004.100 6.000 74.00 36.00 36.004.200 6.000 74.00 36.00 36.004.300 6.000 74.00 36.00 36.004.370 6.000 74.00 36.00 36.004.400 6.000 74.00 36.00 36.004.500 6.000 74.00 36.00 36.004.600 6.000 74.00 36.00 36.004.650 6.000 74.00 36.00 36.004.700 6.000 74.00 36.00 36.004.760 6.000 82.00 44.00 36.004.800 6.000 82.00 44.00 36.004.900 6.000 82.00 44.00 36.005.000 6.000 82.00 44.00 36.005.100 6.000 82.00 44.00 36.005.160 6.000 82.00 44.00 36.005.200 6.000 82.00 44.00 36.005.300 6.000 82.00 44.00 36.005.400 6.000 82.00 44.00 36.005.500 6.000 82.00 44.00 36.005.550 6.000 82.00 44.00 36.005.560 6.000 82.00 44.00 36.005.600 6.000 82.00 44.00 36.005.700 6.000 82.00 44.00 36.005.800 6.000 82.00 44.00 36.005.900 6.000 82.00 44.00 36.005.950 6.000 82.00 44.00 36.006.000 6.000 82.00 44.00 36.006.100 8.000 91.00 53.00 36.006.200 8.000 91.00 53.00 36.006.300 8.000 91.00 53.00 36.006.350 8.000 91.00 53.00 36.006.400 8.000 91.00 53.00 36.006.500 8.000 91.00 53.00 36.006.600 8.000 91.00 53.00 36.006.700 8.000 91.00 53.00 36.006.750 8.000 91.00 53.00 36.006.800 8.000 91.00 53.00 36.006.900 8.000 91.00 53.00 36.007.000 8.000 91.00 53.00 36.00

8

F

l1

d1 d2

l2 l3

tmax

tmax=l2-1,5 x d1

F F

9/32

19/64

5/16

21/64

11/32

23/64

3/8

25/64

13/32

7/16


bright FIRE

89414 89417

Solid carbide

155 155

HA HE

TS 100 U TS 100 U


mm inch mm mm mm mm

7.100 8.000 91.00 53.00 36.007.140 8.000 91.00 53.00 36.007.200 8.000 91.00 53.00 36.007.300 8.000 91.00 53.00 36.007.400 8.000 91.00 53.00 36.007.500 8.000 91.00 53.00 36.007.540 8.000 91.00 53.00 36.007.600 8.000 91.00 53.00 36.007.700 8.000 91.00 53.00 36.007.800 8.000 91.00 53.00 36.007.900 8.000 91.00 53.00 36.007.940 8.000 91.00 53.00 36.008.000 8.000 91.00 53.00 36.008.100 10.000 103.00 61.00 40.008.200 10.000 103.00 61.00 40.008.300 10.000 103.00 61.00 40.008.330 10.000 103.00 61.00 40.008.400 10.000 103.00 61.00 40.008.500 10.000 103.00 61.00 40.008.600 10.000 103.00 61.00 40.008.700 10.000 103.00 61.00 40.008.730 10.000 103.00 61.00 40.008.800 10.000 103.00 61.00 40.008.900 10.000 103.00 61.00 40.009.000 10.000 103.00 61.00 40.009.100 10.000 103.00 61.00 40.009.130 10.000 103.00 61.00 40.009.200 10.000 103.00 61.00 40.009.250 10.000 103.00 61.00 40.009.300 10.000 103.00 61.00 40.009.400 10.000 103.00 61.00 40.009.500 10.000 103.00 61.00 40.009.520 10.000 103.00 61.00 40.009.600 10.000 103.00 61.00 40.009.700 10.000 103.00 61.00 40.009.800 10.000 103.00 61.00 40.009.900 10.000 103.00 61.00 40.009.920 10.000 103.00 61.00 40.0010.000 10.000 103.00 61.00 40.0010.100 12.000 118.00 71.00 45.0010.200 12.000 118.00 71.00 45.0010.300 12.000 118.00 71.00 45.0010.320 12.000 118.00 71.00 45.0010.400 12.000 118.00 71.00 45.0010.500 12.000 118.00 71.00 45.0010.600 12.000 118.00 71.00 45.0010.700 12.000 118.00 71.00 45.0010.800 12.000 118.00 71.00 45.0010.900 12.000 118.00 71.00 45.0011.000 12.000 118.00 71.00 45.0011.100 12.000 118.00 71.00 45.0011.110 12.000 118.00 71.00 45.0011.200 12.000 118.00 71.00 45.0011.300 12.000 118.00 71.00 45.00

9

F

l1

d1 d2

l2 l3

tmax

tmax=l2-1,5 x d1

F F

15/32

1/2

9/16

3/4


bright FIRE

89414 89417

Solid carbide

155 155

HA HE

TS 100 U TS 100 U


mm inch mm mm mm mm

11.400 12.000 118.00 71.00 45.0011.500 12.000 118.00 71.00 45.0011.600 12.000 118.00 71.00 45.0011.700 12.000 118.00 71.00 45.0011.800 12.000 118.00 71.00 45.0011.900 12.000 118.00 71.00 45.0011.910 12.000 118.00 71.00 45.0012.000 12.000 118.00 71.00 45.0012.200 14.000 124.00 77.00 45.0012.500 14.000 124.00 77.00 45.0012.700 14.000 124.00 77.00 45.0013.000 14.000 124.00 77.00 45.0013.500 14.000 124.00 77.00 45.0013.700 14.000 124.00 77.00 45.0014.000 14.000 124.00 77.00 45.0014.200 16.000 133.00 83.00 48.0014.290 16.000 133.00 83.00 48.0014.500 16.000 133.00 83.00 48.0014.700 16.000 133.00 83.00 48.0015.000 16.000 133.00 83.00 48.0015.200 16.000 133.00 83.00 48.0015.500 16.000 133.00 83.00 48.0015.700 16.000 133.00 83.00 48.0016.000 16.000 133.00 83.00 48.0016.500 18.000 143.00 93.00 48.0017.000 18.000 143.00 93.00 48.0017.500 18.000 143.00 93.00 48.0018.000 18.000 143.00 93.00 48.0018.500 20.000 153.00 101.00 50.0019.000 20.000 153.00 101.00 50.0019.500 20.000 153.00 101.00 50.0020.000 20.000 153.00 101.00 50.00

TM MULTI VENDING

MACHINE

Intelligent tool management around the clock


F FIRE

11

3 x D

F

3 x D

F

5 x D

F

5 x D

F

TS-Drills with oil feed

bright

Article no. 89410


Preconditions for use:Powerful machines. No play in spindle bearings. Alignment accurate tool holders. Max. concentricity error of clamped tools: 0.02 mm. Chatterfree, mechanical feeds. The tool is available without whistle notch flat for application in shrink fit or hydraulic chucks.

Standard DIN 6537K


Surface finish

Type TS 100 U

Shank HA



Point angle ° 140

Tolerance on Ø m7

Article no. 89415


Preconditions for use:Powerful machines. No play in spindle bearings. Alignment accurate tool holders. Max. concentricity error of clamped tools: 0.02 mm. Chatterfree, mechanical feeds.

Standard DIN 6537K


Surface finish

Type TS 100 U

Shank HE



Point angle ° 140

Tolerance on Ø m7

Article no. 89411


Preconditions for use:Powerful machines. No play in spindle bearings. Alignment accurate tool holders.Max. concentricity error of clamped tools: 0.02 mm. Chatterfree, mechanical feeds. The The tool is available without whistle notch flat for application in shrink fit/hydraulic chucks.

Standard DIN 6537L


Surface finish

Type TS 100 U

Shank HA



Point angle ° 140

Tolerance on Ø m7

Article no. 89408

recommendations page 40) possible, high alignment accuracy with tight tolerance and excellent surface finish. Excellent self-centering qualities as well as producing short chips thanks to a straight cutting point geometry with special point grind and web thinning.

Preconditions for use:Powerful machines. No play in spindle bearings. Alignment accurate tool holders.Max. concentricity error of clamped tools: 0.02 mm. Chatterfree, mechanical feeds.

Standard DIN 6537L

Tool material Solid carbideHigh-performance drill for the drilling of long- and short-chipping materials such as structural and case hardened steels, cast steels, heat-treatable steels and alloyed steels with a tensile strength of up to 1200 N/mm², including carbon steels, cast iron and high-alloyed AlSi-alloys. For drilling depths up to 5 x D.

Advantages:Highest speed and feed rates (see application

Surface finish

Type TS 100 U

Shank HE



Point angle ° 140

Tolerance on Ø m7

12

F

l1

d1 d2

l2 l3

tmax

tmax=l2-1,5 x d1

F F

1/8

9/64

5/32

11/64

3/16

13/64

7/32

15/64

1/4

17/64

TS-Drills with oil feed, 3 x D

bright FIRE

89410 89415

Solid carbide

155 155

HA HE

TS 100 U TS 100 U


mm inch mm mm mm mm

3.000 6.000 62.00 20.00 36.003.100 6.000 62.00 20.00 36.003.170 6.000 62.00 20.00 36.003.200 6.000 62.00 20.00 36.003.250 6.000 62.00 20.00 36.003.300 6.000 62.00 20.00 36.003.400 6.000 62.00 20.00 36.003.500 6.000 62.00 20.00 36.003.570 6.000 62.00 20.00 36.003.600 6.000 62.00 20.00 36.003.700 6.000 62.00 20.00 36.003.800 6.000 66.00 24.00 36.003.900 6.000 66.00 24.00 36.003.970 6.000 66.00 24.00 36.004.000 6.000 66.00 24.00 36.004.100 6.000 66.00 24.00 36.004.200 6.000 66.00 24.00 36.004.300 6.000 66.00 24.00 36.004.370 6.000 66.00 24.00 36.004.400 6.000 66.00 24.00 36.004.500 6.000 66.00 24.00 36.004.600 6.000 66.00 24.00 36.004.650 6.000 66.00 24.00 36.004.700 6.000 66.00 24.00 36.004.760 6.000 66.00 28.00 36.004.800 6.000 66.00 28.00 36.004.900 6.000 66.00 28.00 36.005.000 6.000 66.00 28.00 36.005.100 6.000 66.00 28.00 36.005.160 6.000 66.00 28.00 36.005.200 6.000 66.00 28.00 36.005.300 6.000 66.00 28.00 36.005.400 6.000 66.00 28.00 36.005.500 6.000 66.00 28.00 36.005.550 6.000 66.00 28.00 36.005.560 6.000 66.00 28.00 36.005.600 6.000 66.00 28.00 36.005.700 6.000 66.00 28.00 36.005.800 6.000 66.00 28.00 36.005.900 6.000 66.00 28.00 36.005.950 6.000 66.00 28.00 36.006.000 6.000 66.00 28.00 36.006.100 8.000 79.00 34.00 36.006.200 8.000 79.00 34.00 36.006.300 8.000 79.00 34.00 36.006.350 8.000 79.00 34.00 36.006.400 8.000 79.00 34.00 36.006.500 8.000 79.00 34.00 36.006.600 8.000 79.00 34.00 36.006.700 8.000 79.00 34.00 36.006.750 8.000 79.00 34.00 36.006.800 8.000 79.00 34.00 36.006.900 8.000 79.00 34.00 36.007.000 8.000 79.00 34.00 36.00

13

F

l1

d1 d2

l2 l3

tmax

tmax=l2-1,5 x d1

F F

9/32

19/64

5/16

21/64

11/32

23/64

3/8

25/64

13/32

7/16


bright FIRE

89410 89415

Solid carbide

155 155

HA HE

TS 100 U TS 100 U


mm inch mm mm mm mm

7.100 8.000 79.00 41.00 36.007.140 8.000 79.00 41.00 36.007.200 8.000 79.00 41.00 36.007.300 8.000 79.00 41.00 36.007.400 8.000 79.00 41.00 36.007.500 8.000 79.00 41.00 36.007.540 8.000 79.00 41.00 36.007.600 8.000 79.00 41.00 36.007.700 8.000 79.00 41.00 36.007.800 8.000 79.00 41.00 36.007.900 8.000 79.00 41.00 36.007.940 8.000 79.00 41.00 36.008.000 8.000 79.00 41.00 36.008.100 10.000 89.00 47.00 40.008.200 10.000 89.00 47.00 40.008.300 10.000 89.00 47.00 40.008.330 10.000 89.00 47.00 40.008.400 10.000 89.00 47.00 40.008.500 10.000 89.00 47.00 40.008.600 10.000 89.00 47.00 40.008.700 10.000 89.00 47.00 40.008.730 10.000 89.00 47.00 40.008.800 10.000 89.00 47.00 40.008.900 10.000 89.00 47.00 40.009.000 10.000 89.00 47.00 40.009.100 10.000 89.00 47.00 40.009.130 10.000 89.00 47.00 40.009.200 10.000 89.00 47.00 40.009.250 10.000 89.00 47.00 40.009.300 10.000 89.00 47.00 40.009.400 10.000 89.00 47.00 40.009.500 10.000 89.00 47.00 40.009.520 10.000 89.00 47.00 40.009.600 10.000 89.00 47.00 40.009.700 10.000 89.00 47.00 40.009.800 10.000 89.00 47.00 40.009.900 10.000 89.00 47.00 40.009.920 10.000 89.00 47.00 40.0010.000 10.000 89.00 47.00 40.0010.100 12.000 102.00 55.00 45.0010.200 12.000 102.00 55.00 45.0010.300 12.000 102.00 55.00 45.0010.320 12.000 102.00 55.00 45.0010.400 12.000 102.00 55.00 45.0010.500 12.000 102.00 55.00 45.0010.600 12.000 102.00 55.00 45.0010.700 12.000 102.00 55.00 45.0010.800 12.000 102.00 55.00 45.0010.900 12.000 102.00 55.00 45.0011.000 12.000 102.00 55.00 45.0011.100 12.000 102.00 55.00 45.0011.110 12.000 102.00 55.00 45.0011.200 12.000 102.00 55.00 45.0011.300 12.000 102.00 55.00 45.00

14

F

l1

d1 d2

l2 l3

tmax

tmax=l2-1,5 x d1

F F

15/32

1/2

9/16


bright FIRE

89410 89415

Solid carbide

155 155

HA HE

TS 100 U TS 100 U


mm inch mm mm mm mm

11.400 12.000 102.00 55.00 45.0011.500 12.000 102.00 55.00 45.0011.600 12.000 102.00 55.00 45.0011.700 12.000 102.00 55.00 45.0011.800 12.000 102.00 55.00 45.0011.900 12.000 102.00 55.00 45.0011.910 12.000 102.00 55.00 45.0012.000 12.000 102.00 55.00 45.0012.200 14.000 107.00 60.00 45.0012.500 14.000 107.00 60.00 45.0012.700 14.000 107.00 60.00 45.0013.000 14.000 107.00 60.00 45.0013.500 14.000 107.00 60.00 45.0013.700 14.000 107.00 60.00 45.0014.000 14.000 107.00 60.00 45.0014.200 16.000 115.00 65.00 48.0014.290 16.000 115.00 65.00 48.0014.500 16.000 115.00 65.00 48.0014.700 16.000 115.00 65.00 48.0015.000 16.000 115.00 65.00 48.0015.200 16.000 115.00 65.00 48.0015.500 16.000 115.00 65.00 48.0015.700 16.000 115.00 65.00 48.0016.000 16.000 115.00 65.00 48.0016.500 18.000 123.00 73.00 48.0017.000 18.000 123.00 73.00 48.0017.500 18.000 123.00 73.00 48.0018.000 18.000 123.00 73.00 48.0018.500 20.000 131.00 79.00 50.0019.000 20.000 131.00 79.00 50.0019.500 20.000 131.00 79.00 50.0020.000 20.000 131.00 79.00 50.00

15

F

l1

d1 d2

l2 l3

tmax

tmax=l2-1,5 x d1

F F

1/8

9/64

5/32

11/64

3/16

13/64

7/32

15/64

1/4

17/64


bright FIRE

89411 89408

Solid carbide

155 155

HA HE

TS 100 U TS 100 U


mm inch mm mm mm mm

3.000 6.000 66.00 28.00 36.003.100 6.000 66.00 28.00 36.003.170 6.000 66.00 28.00 36.003.200 6.000 66.00 28.00 36.003.250 6.000 66.00 28.00 36.003.300 6.000 66.00 28.00 36.003.400 6.000 66.00 28.00 36.003.500 6.000 66.00 28.00 36.003.570 6.000 66.00 28.00 36.003.600 6.000 66.00 28.00 36.003.700 6.000 66.00 28.00 36.003.800 6.000 74.00 36.00 36.003.900 6.000 74.00 36.00 36.003.970 6.000 74.00 36.00 36.004.000 6.000 74.00 36.00 36.004.100 6.000 74.00 36.00 36.004.200 6.000 74.00 36.00 36.004.300 6.000 74.00 36.00 36.004.370 6.000 74.00 36.00 36.004.400 6.000 74.00 36.00 36.004.500 6.000 74.00 36.00 36.004.600 6.000 74.00 36.00 36.004.650 6.000 74.00 36.00 36.004.700 6.000 74.00 36.00 36.004.760 6.000 82.00 44.00 36.004.800 6.000 82.00 44.00 36.004.900 6.000 82.00 44.00 36.005.000 6.000 82.00 44.00 36.005.100 6.000 82.00 44.00 36.005.160 6.000 82.00 44.00 36.005.200 6.000 82.00 44.00 36.005.300 6.000 82.00 44.00 36.005.400 6.000 82.00 44.00 36.005.500 6.000 82.00 44.00 36.005.550 6.000 82.00 44.00 36.005.560 6.000 82.00 44.00 36.005.600 6.000 82.00 44.00 36.005.700 6.000 82.00 44.00 36.005.800 6.000 82.00 44.00 36.005.900 6.000 82.00 44.00 36.005.950 6.000 82.00 44.00 36.006.000 6.000 82.00 44.00 36.006.100 8.000 91.00 53.00 36.006.200 8.000 91.00 53.00 36.006.300 8.000 91.00 53.00 36.006.350 8.000 91.00 53.00 36.006.400 8.000 91.00 53.00 36.006.500 8.000 91.00 53.00 36.006.600 8.000 91.00 53.00 36.006.700 8.000 91.00 53.00 36.006.750 8.000 91.00 53.00 36.006.800 8.000 91.00 53.00 36.006.900 8.000 91.00 53.00 36.007.000 8.000 91.00 53.00 36.00

16

F

l1

d1 d2

l2 l3

tmax

tmax=l2-1,5 x d1

F F

9/32

19/64

5/16

21/64

11/32

23/64

3/8

25/64

13/32

7/16


bright FIRE

89411 89408

Solid carbide

155 155

HA HE

TS 100 U TS 100 U


mm inch mm mm mm mm

7.100 8.000 91.00 53.00 36.007.140 8.000 91.00 53.00 36.007.200 8.000 91.00 53.00 36.007.300 8.000 91.00 53.00 36.007.400 8.000 91.00 53.00 36.007.500 8.000 91.00 53.00 36.007.540 8.000 91.00 53.00 36.007.600 8.000 91.00 53.00 36.007.700 8.000 91.00 53.00 36.007.800 8.000 91.00 53.00 36.007.900 8.000 91.00 53.00 36.007.940 8.000 91.00 53.00 36.008.000 8.000 91.00 53.00 36.008.100 10.000 103.00 61.00 40.008.200 10.000 103.00 61.00 40.008.300 10.000 103.00 61.00 40.008.330 10.000 103.00 61.00 40.008.400 10.000 103.00 61.00 40.008.500 10.000 103.00 61.00 40.008.600 10.000 103.00 61.00 40.008.700 10.000 103.00 61.00 40.008.730 10.000 103.00 61.00 40.008.800 10.000 103.00 61.00 40.008.900 10.000 103.00 61.00 40.009.000 10.000 103.00 61.00 40.009.100 10.000 103.00 61.00 40.009.130 10.000 103.00 61.00 40.009.200 10.000 103.00 61.00 40.009.250 10.000 103.00 61.00 40.009.300 10.000 103.00 61.00 40.009.400 10.000 103.00 61.00 40.009.500 10.000 103.00 61.00 40.009.520 10.000 103.00 61.00 40.009.600 10.000 103.00 61.00 40.009.700 10.000 103.00 61.00 40.009.800 10.000 103.00 61.00 40.009.900 10.000 103.00 61.00 40.009.920 10.000 103.00 61.00 40.0010.000 10.000 103.00 61.00 40.0010.100 12.000 118.00 71.00 45.0010.200 12.000 118.00 71.00 45.0010.300 12.000 118.00 71.00 45.0010.320 12.000 118.00 71.00 45.0010.400 12.000 118.00 71.00 45.0010.500 12.000 118.00 71.00 45.0010.600 12.000 118.00 71.00 45.0010.700 12.000 118.00 71.00 45.0010.800 12.000 118.00 71.00 45.0010.900 12.000 118.00 71.00 45.0011.000 12.000 118.00 71.00 45.0011.100 12.000 118.00 71.00 45.0011.110 12.000 118.00 71.00 45.0011.200 12.000 118.00 71.00 45.0011.300 12.000 118.00 71.00 45.00

17

F

l1

d1 d2

l2 l3

tmax

tmax=l2-1,5 x d1

F F

15/32

1/2

9/16

3/4


bright FIRE

89411 89408

Solid carbide

155 155

HA HE

TS 100 U TS 100 U


mm inch mm mm mm mm

11.400 12.000 118.00 71.00 45.0011.500 12.000 118.00 71.00 45.0011.600 12.000 118.00 71.00 45.0011.700 12.000 118.00 71.00 45.0011.800 12.000 118.00 71.00 45.0011.900 12.000 118.00 71.00 45.0011.910 12.000 118.00 71.00 45.0012.000 12.000 118.00 71.00 45.0012.200 14.000 124.00 77.00 45.0012.500 14.000 124.00 77.00 45.0012.700 14.000 124.00 77.00 45.0013.000 14.000 124.00 77.00 45.0013.500 14.000 124.00 77.00 45.0013.700 14.000 124.00 77.00 45.0014.000 14.000 124.00 77.00 45.0014.200 16.000 133.00 83.00 48.0014.290 16.000 133.00 83.00 48.0014.500 16.000 133.00 83.00 48.0014.700 16.000 133.00 83.00 48.0015.000 16.000 133.00 83.00 48.0015.200 16.000 133.00 83.00 48.0015.500 16.000 133.00 83.00 48.0015.700 16.000 133.00 83.00 48.0016.000 16.000 133.00 83.00 48.0016.500 18.000 143.00 93.00 48.0017.000 18.000 143.00 93.00 48.0017.500 18.000 143.00 93.00 48.0018.000 18.000 143.00 93.00 48.0018.500 20.000 153.00 101.00 50.0019.000 20.000 153.00 101.00 50.0019.050 20.000 153.00 101.00 50.0019.500 20.000 153.00 101.00 50.0020.000 20.000 153.00 101.00 50.00

18

F

7 x D

F

7 x D

F

bright FIRE

TS-Drills with internal coolant

Article no. 89412

margins for high alignment accuracy with tight tolerance and excellent surface fi nish. Excellent self-centering qualities as well as producing short chips thanks to a optimised cutting point geome-try with special point grind and web thinning.

Preconditions for use: Powerful machines. No play in spindle bearings. Alignment accurate tool holders. Max. concentricity error of clamped tools: 0.02 mm. Chatterfree, mechanical feeds. The tool is available without whistle notch fl at for the application in hydraulic/shrink fi t chucks.

Standard Hartner std.

Tool material Solid carbideFor drilling of long- and short-chipping materials such as structural and case hardened steels, cast steels, heat-treatable and alloyed steels with tensile strength of up to 1200 N/mm², incl. carbon steels, bronze, cast iron and high-alloyed AlSi-alloys. For drilling depths up to 7 x D.

Advantages:Highest speed and feed rates (see application recommendations page 40) possible, double

Surface fi nish

Type TS 100 U

Shank HA



Point angle ° 140

Tolerance on Ø m7

Article no. 89416

margins for high alignment accuracy with tight tolerance and excellent surface fi nish. Excellent self-centering qualities as well as producing short chips thanks to a optimised cutting point geome-try with special point grind and web thinning.

Preconditions for use: Powerful machines. No play in spindle bearings. Alignment accurate tool holders. Max. concentricity error of clamped tools: 0.02 mm. Chatterfree, mechanical feeds.


Tool material Solid carbideFor drilling of long- and short-chipping materials such as structural and case hardened steels, cast steels, heat-treatable and alloyed steels with tensile strength of up to 1200 N/mm², incl. carbon steels, bronze, cast iron and high-alloyed AlSi-alloys. For drilling depths up to 7 x D.

Advantages:Highest speed and feed rates (see application recommendations page 40) possible, double

Surface fi nish

Type TS 100 U

Shank HE



Point angle ° 140

Tolerance on Ø m7

19

F

l1

d2

l3

d1

l2

tmax

tmax=l2-1,5 x d1

F F

1/8

9/64

5/32

11/64

3/16

13/64

1/4

89412 89416

Solid carbide

155 155

HA HE

TS 100 U TS 100 U


mm inch mm mm mm mm3.000 6.000 70.00 30.00 36.003.100 6.000 70.00 30.00 36.003.170 6.000 70.00 30.00 36.003.200 6.000 70.00 30.00 36.003.250 6.000 70.00 30.00 36.003.300 6.000 70.00 30.00 36.003.400 6.000 75.00 35.50 36.003.500 6.000 75.00 35.50 36.003.570 6.000 75.00 35.50 36.003.600 6.000 75.00 35.50 36.003.700 6.000 75.00 35.50 36.003.800 6.000 75.00 37.50 36.003.900 6.000 75.00 37.50 36.003.970 6.000 75.00 37.50 36.004.000 6.000 75.00 37.50 36.004.100 6.000 75.00 37.50 36.004.200 6.000 75.00 37.50 36.004.300 6.000 85.00 45.00 36.004.370 6.000 85.00 45.00 36.004.400 6.000 85.00 45.00 36.004.500 6.000 85.00 45.00 36.004.600 6.000 85.00 45.00 36.004.650 6.000 85.00 45.00 36.004.700 6.000 85.00 45.00 36.004.760 6.000 90.00 50.00 36.004.800 6.000 90.00 50.00 36.004.900 6.000 90.00 50.00 36.005.000 6.000 90.00 50.00 36.005.100 6.000 90.00 50.00 36.005.160 6.000 90.00 50.00 36.005.200 6.000 90.00 50.00 36.005.300 6.000 90.00 50.00 36.005.400 6.000 97.00 57.00 36.005.500 6.000 97.00 57.00 36.005.700 6.000 97.00 57.00 36.005.800 6.000 97.00 57.00 36.005.900 6.000 97.00 57.00 36.006.000 6.000 97.00 57.00 36.006.200 8.000 106.00 66.00 36.006.300 8.000 106.00 66.00 36.006.350 8.000 106.00 66.00 36.006.500 8.000 106.00 66.00 36.006.600 8.000 106.00 66.00 36.006.700 8.000 106.00 66.00 36.006.800 8.000 106.00 66.00 36.006.900 8.000 116.00 76.00 36.007.000 8.000 116.00 76.00 36.007.100 8.000 116.00 76.00 36.007.200 8.000 116.00 76.00 36.007.500 8.000 116.00 76.00 36.007.600 8.000 116.00 76.00 36.007.700 8.000 116.00 76.00 36.007.800 8.000 116.00 76.00 36.008.000 8.000 116.00 76.00 36.00

TS-Drills with internal coolant, 7 x D

bright FIRE

20

F

l1

d2

l3

d1

l2

tmax

tmax=l2-1,5 x d1

F F

3/8

1/2

3/4

89412 89416

Solid carbide

155 155

HA HE

TS 100 U TS 100 U


mm inch mm mm mm mm8.100 10.000 131.00 87.00 40.008.200 10.000 131.00 87.00 40.008.400 10.000 131.00 87.00 40.008.500 10.000 131.00 87.00 40.008.600 10.000 131.00 87.00 40.008.700 10.000 131.00 87.00 40.008.800 10.000 131.00 87.00 40.009.000 10.000 131.00 87.00 40.009.100 10.000 139.00 95.00 40.009.200 10.000 139.00 95.00 40.009.300 10.000 139.00 95.00 40.009.400 10.000 139.00 95.00 40.009.500 10.000 139.00 95.00 40.009.520 10.000 139.00 95.00 40.009.700 10.000 139.00 95.00 40.009.800 10.000 139.00 95.00 40.009.900 10.000 139.00 95.00 40.0010.000 10.000 139.00 95.00 40.0010.200 12.000 155.00 106.00 45.0010.500 12.000 155.00 106.00 45.0010.800 12.000 155.00 106.00 45.0011.000 12.000 155.00 106.00 45.0011.200 12.000 163.00 114.00 45.0011.500 12.000 163.00 114.00 45.0011.800 12.000 163.00 114.00 45.0012.000 12.000 163.00 114.00 45.0012.200 14.000 182.00 133.00 45.0012.500 14.000 182.00 133.00 45.0012.700 14.000 182.00 133.00 45.0013.000 14.000 182.00 133.00 45.0013.500 14.000 182.00 133.00 45.0014.000 14.000 182.00 133.00 45.0014.200 16.000 204.00 152.00 48.0014.500 16.000 204.00 152.00 48.0015.000 16.000 204.00 152.00 48.0015.500 16.000 204.00 152.00 48.0016.000 16.000 204.00 152.00 48.0016.500 18.000 223.00 171.00 48.0017.000 18.000 223.00 171.00 48.0017.500 18.000 223.00 171.00 48.0018.000 18.000 223.00 171.00 48.0018.500 20.000 244.00 190.00 50.0019.000 20.000 244.00 190.00 50.0019.050 20.000 244.00 190.00 50.0019.500 20.000 244.00 190.00 50.0020.000 20.000 244.00 190.00 50.00


bright FIRE

21

F

10 x D

bright FIRE

Article no. 89293

Advantages: Extremely good self-centering qua-lities, small diameter tolerances (to H7), excellent surface fi nish, high cutting rates, high productivity (see application recommendations page 40).Preconditions for use:Powerful machines. No play in spindle bearings. Alignment accurate tool holders. Max. concentrici-ty error of clamped tools: 0.02 mm. We recom-mend the application of shrink fi t/hydraulic chucks.


Tool material Solid carbideStraight fl uted drill for the drilling of short-chipping materials such as cast iron, grey cast iron, sphe-roidal graphite and malleable cast iron. For the production of holes with high alignment accuracy (minimal deviation from straightness).The drills are available bright or with T-, A-, C- and F-coating, for further performance in special machining processes. Recoating is not necessary when regrinding.For drilling depths up to 10 x D.

Surface fi nish

Type TS 150 GG

Shank HA


Point grinding relieved cone

Point angle ° 120

Tolerance on Ø m7


22

F

l 1

l 2 l 3

d 1

d 2

tmax

tmax=l2-1,5 x d1

1/8

9/64

5/32

1/4

3/8

1/2

89293

Solid carbide

155

HA

TS 150 GG


mm inch mm mm mm mm3.000 6.000 91.00 42.00 36.003.170 6.000 91.00 42.00 36.003.250 6.000 91.00 42.00 36.003.300 6.000 91.00 42.00 36.003.500 6.000 91.00 48.00 36.003.570 6.000 91.00 48.00 36.003.800 6.000 121.00 77.00 36.003.970 6.000 121.00 77.00 36.004.000 6.000 121.00 77.00 36.004.200 6.000 121.00 77.00 36.004.500 6.000 121.00 77.00 36.005.000 6.000 121.00 82.00 36.005.500 6.000 121.00 82.00 36.006.000 6.000 121.00 82.00 36.006.350 8.000 146.00 106.00 36.006.500 8.000 146.00 106.00 36.006.800 8.000 146.00 106.00 36.007.000 8.000 146.00 106.00 36.007.500 8.000 146.00 106.00 36.007.800 8.000 146.00 106.00 36.008.000 8.000 146.00 106.00 36.008.500 10.000 175.00 130.00 40.009.000 10.000 175.00 130.00 40.009.500 10.000 175.00 130.00 40.009.520 10.000 175.00 130.00 40.0010.000 10.000 175.00 130.00 40.0010.200 12.000 209.00 159.00 45.0010.500 12.000 209.00 159.00 45.0011.000 12.000 209.00 159.00 45.0011.500 12.000 209.00 159.00 45.0012.000 12.000 209.00 159.00 45.0012.500 14.000 233.00 183.00 45.0012.700 14.000 233.00 183.00 45.0013.000 14.000 233.00 183.00 45.0013.500 14.000 233.00 183.00 45.0014.000 14.000 233.00 183.00 45.0014.500 16.000 260.00 207.00 48.0015.000 16.000 260.00 207.00 48.0015.500 16.000 260.00 207.00 48.0016.000 16.000 260.00 207.00 48.00


bright FIRE

23

F

12 x D

F

bright FIRE


Article no. 89418

qualities and optimal support of the tool during exit.

Preconditions for use:Powerful machines. No play in spindle bearings. Alignment accurate tool holders. Max. concentricity error of clampedtools: 0.02 mm. We recommend the application of hydraulic chucks.


Tool material Solid carbideHigh-performance drill for drilling deep holesin steel, cast iron and non-ferrous metals. For drilling depths up to 12 x D.Advantages:Excellent self-centering qualities thanks tospecial point grind. Provides safe chip fl oweven with tough and long-chipping materialsdue to adapted drill profi le and large fl utespace. Double margins for excellent holealignment and with good surface

Surface fi nish

Type TS 100 U

Shank HA



Point angle ° 135

Tolerance on Ø h7

24

F

l1

d2

l3

d1

l2

tmax

tmax=l2-1,5 x d1

F

1/4


bright FIRE

89418

Solid carbide

155

HA

TS 100


mm inch mm mm mm mm3.000 6.000 90.00 50.00 36.003.100 6.000 90.00 50.00 36.003.170 6.000 90.00 50.00 36.003.200 6.000 90.00 50.00 36.003.300 6.000 90.00 50.00 36.003.400 6.000 90.00 50.00 36.003.500 6.000 90.00 50.00 36.003.600 6.000 90.00 50.00 36.003.700 6.000 90.00 50.00 36.003.800 6.000 102.00 64.00 36.003.900 6.000 102.00 64.00 36.004.000 6.000 102.00 64.00 36.004.100 6.000 102.00 64.00 36.004.200 6.000 102.00 64.00 36.004.300 6.000 102.00 64.00 36.004.400 6.000 102.00 64.00 36.004.500 6.000 102.00 64.00 36.004.600 6.000 102.00 64.00 36.004.700 6.000 102.00 64.00 36.004.800 6.000 116.00 78.00 36.004.900 6.000 116.00 78.00 36.005.000 6.000 116.00 78.00 36.005.100 6.000 116.00 78.00 36.005.200 6.000 116.00 78.00 36.005.300 6.000 116.00 78.00 36.005.400 6.000 116.00 78.00 36.005.500 6.000 116.00 78.00 36.005.600 6.000 116.00 78.00 36.005.700 6.000 116.00 78.00 36.005.800 6.000 116.00 78.00 36.005.900 6.000 116.00 78.00 36.006.000 6.000 116.00 78.00 36.006.100 8.000 146.00 108.00 36.006.200 8.000 146.00 108.00 36.006.300 8.000 146.00 108.00 36.006.350 8.000 146.00 108.00 36.006.400 8.000 146.00 108.00 36.006.500 8.000 146.00 108.00 36.006.600 8.000 146.00 108.00 36.006.700 8.000 146.00 108.00 36.006.800 8.000 146.00 108.00 36.006.900 8.000 146.00 108.00 36.007.000 8.000 146.00 108.00 36.007.100 8.000 146.00 108.00 36.007.200 8.000 146.00 108.00 36.007.300 8.000 146.00 108.00 36.007.400 8.000 146.00 108.00 36.007.500 8.000 146.00 108.00 36.007.600 8.000 146.00 108.00 36.007.700 8.000 146.00 108.00 36.007.800 8.000 146.00 108.00 36.007.900 8.000 146.00 108.00 36.008.000 8.000 146.00 108.00 36.008.100 10.000 162.00 120.00 40.00

25

F

l1

d2

l3

d1

l2

tmax

tmax=l2-1,5 x d1

F

3/8

1/2

3/4


bright FIRE

89418

Solid carbide

155

HA

TS 100


mm inch mm mm mm mm8.200 10.000 162.00 120.00 40.008.300 10.000 162.00 120.00 40.008.400 10.000 162.00 120.00 40.008.500 10.000 162.00 120.00 40.008.600 10.000 162.00 120.00 40.008.700 10.000 162.00 120.00 40.008.800 10.000 162.00 120.00 40.008.900 10.000 162.00 120.00 40.009.000 10.000 162.00 120.00 40.009.100 10.000 162.00 120.00 40.009.200 10.000 162.00 120.00 40.009.300 10.000 162.00 120.00 40.009.400 10.000 162.00 120.00 40.009.500 10.000 162.00 120.00 40.009.520 10.000 162.00 120.00 40.009.600 10.000 162.00 120.00 40.009.700 10.000 162.00 120.00 40.009.800 10.000 162.00 120.00 40.009.900 10.000 162.00 120.00 40.0010.000 10.000 162.00 120.00 40.0010.200 12.000 204.00 156.00 45.0010.500 12.000 204.00 156.00 45.0011.000 12.000 204.00 156.00 45.0011.500 12.000 204.00 156.00 45.0012.000 12.000 204.00 156.00 45.0012.500 14.000 230.00 182.00 45.0012.700 14.000 230.00 182.00 45.0013.000 14.000 230.00 182.00 45.0013.500 14.000 230.00 182.00 45.0014.000 14.000 230.00 182.00 45.0014.500 16.000 260.00 208.00 48.0015.000 16.000 260.00 208.00 48.0015.500 16.000 260.00 208.00 48.0016.000 16.000 260.00 208.00 48.0016.500 18.000 285.00 234.00 48.0017.000 18.000 285.00 234.00 48.0017.500 18.000 285.00 234.00 48.0018.000 18.000 285.00 234.00 48.0018.500 20.000 310.00 258.00 50.0019.000 20.000 310.00 258.00 50.0019.050 20.000 310.00 258.00 50.0019.500 20.000 310.00 258.00 50.0020.000 20.000 310.00 258.00 50.00

26

F

5 x D

bright FIRE

Article no. 89247

Standard DIN 6537L

Tool material Solid carbideA tool for heavy duty drilling from the solid, giving precise centering and accurate hole form. This includes applications such as oblique centering or interrupted drilling. Precision in size and surface fi nish correspond to those achieved with core drills. Centering or spotting is not normally required. Suitable for drilling cast iron and long-chipping aluminium alloys. For drilling depths up to 5 x D.

Surface fi nish

Type TS 3 G

Shank HA


Point grinding Spiropoint

Point angle ° 130

Tolerance on Ø m7

TS-Drills without oil feed, 3-fl ute

27

F

l2

l1

d1

d2

l3

tmax

tmax=l2-1,5 x d1

89247

Solid carbide

155

HA

TS 3 G


mm inch mm mm mm mm3.000 6.000 66.00 28.00 36.003.100 6.000 66.00 28.00 36.003.200 6.000 66.00 28.00 36.003.300 6.000 66.00 28.00 36.003.500 6.000 66.00 28.00 36.003.700 6.000 66.00 28.00 36.003.800 6.000 74.00 36.00 36.004.000 6.000 74.00 36.00 36.004.100 6.000 74.00 36.00 36.004.200 6.000 74.00 36.00 36.004.500 6.000 74.00 36.00 36.004.800 6.000 82.00 44.00 36.005.000 6.000 82.00 44.00 36.005.100 6.000 82.00 44.00 36.005.200 6.000 82.00 44.00 36.005.300 6.000 82.00 44.00 36.005.500 6.000 82.00 44.00 36.005.800 6.000 82.00 44.00 36.006.000 6.000 82.00 44.00 36.006.100 8.000 91.00 53.00 36.006.200 8.000 91.00 53.00 36.006.400 8.000 91.00 53.00 36.006.500 8.000 91.00 53.00 36.006.700 8.000 91.00 53.00 36.006.800 8.000 91.00 53.00 36.007.000 8.000 91.00 53.00 36.007.100 8.000 91.00 53.00 36.007.400 8.000 91.00 53.00 36.007.500 8.000 91.00 53.00 36.007.800 8.000 91.00 53.00 36.008.000 8.000 91.00 53.00 36.008.100 10.000 103.00 61.00 40.008.200 10.000 103.00 61.00 40.008.400 10.000 103.00 61.00 40.008.500 10.000 103.00 61.00 40.008.600 10.000 103.00 61.00 40.008.700 10.000 103.00 61.00 40.008.800 10.000 103.00 61.00 40.009.000 10.000 103.00 61.00 40.009.100 10.000 103.00 61.00 40.009.500 10.000 103.00 61.00 40.009.800 10.000 103.00 61.00 40.0010.000 10.000 103.00 61.00 40.0010.100 12.000 118.00 71.00 45.0010.200 12.000 118.00 71.00 45.0010.300 12.000 118.00 71.00 45.0010.500 12.000 118.00 71.00 45.0011.000 12.000 118.00 71.00 45.0011.200 12.000 118.00 71.00 45.0011.500 12.000 118.00 71.00 45.0011.800 12.000 118.00 71.00 45.0012.000 12.000 118.00 71.00 45.0012.100 14.000 124.00 77.00 45.0012.500 14.000 124.00 77.00 45.00

TS-Drills without oil feed, 3-flute, 5 x D

bright FIRE

28

F

l2

l1

d1

d2

l3

tmax

tmax=l2-1,5 x d1

89247

Solid carbide

155

HA

TS 3 G


mm inch mm mm mm mm13.000 14.000 124.00 77.00 45.0013.500 14.000 124.00 77.00 45.0014.000 14.000 124.00 77.00 45.0014.500 16.000 133.00 83.00 48.0015.000 16.000 133.00 83.00 48.0015.500 16.000 133.00 83.00 48.0016.000 16.000 133.00 83.00 48.0016.500 18.000 143.00 93.00 48.0017.000 18.000 143.00 93.00 48.0017.500 18.000 143.00 93.00 48.0018.000 18.000 143.00 93.00 48.0018.500 20.000 153.00 101.00 50.0019.000 20.000 153.00 101.00 50.0019.500 20.000 153.00 101.00 50.0020.000 20.000 153.00 101.00 50.00

TS-Drills without oil feed, 3-flute, 5 x D

bright FIRE

29

F

F

F

bright FIRE

Solid carbide twist drills without internal coolant

Stub drills 3 x D Article no. 89235

Standard DIN 6539

Tool material Solid carbideA standard drill for use in grey cast iron, bronzes, light metals and nonferrous metals. Ideallysuited to the economic machining of abrasivematerials (AlSi-alloys), fi bre-reinforced plasticsand other Duroplastics that are liable to causesevere abrasion on cutting lips and lands.

Surface fi nish

Type N

Shank rh

Cutting direction 2-facet

Point grinding 118

Point angle ° 2.00

Tolerance on Ø h7

Stub drills 3 x D Bestell-Nr. 89253

Standard DIN 6539

Tool material Solid carbideA standard drill for use in general-purpose constructional steels, free-cutting steels, case hardening steels, heat-treatable steels, cast steel, grey cast iron, chilled cast iron and austenitic manganese steel. Ideally suited to the economic machining of abrasive materials (AlSi-alloys), fi bre-reinforced plastics and other Duroplastics that are liable to cause severe abrasion on cutting lips and lands.

Surface fi nish

Type N

Shank rh


Point grinding 118

Point angle ° 1.00

Tolerance on Ø h7

Jobber drills 5 x D Article no. 89244


Tool material Solid carbideA standard drill for application in grey cast iron, bronzes, light metals and nonferrous metals. Ideally suited to the economic machining of abrasive materials (AlSi-alloys), fi ber-reinforced plastics and other Duroplastics liable to cause severe abrasion on cutting lip and lands.

Surface fi nish

Type N

Shank rh


Point grinding 118

Point angle ° 2.00

Tolerance on Ø h7

Jobber drills 5 x D Bestell-Nr. 89261


Tool material Solid carbideA standard drill for use in general-purpose constructional steels, free-cutting steels, case hardening steels, heat-treatable steels, cast steel, grey cast iron, chilled cast iron and austenitic manganese steel. Ideally suited to the economic machining of abrasive materials (AlSi-alloys), fi bre-reinforced plastics and other Duroplastics that are liable to cause severe abrasion on cutting lips and lands.

Surface fi nish

Type N

Shank rh


Point grinding 118

Point angle ° 1.00

30

F

l1

d1

l2

3/32

7/64

1/8

9/64

5/32

11/64

3/16

1/4

9/32

5/16

11/32

Stub drills without internal coolant, 3 x D

bright FIRE

89235

Solid carbide

155

DZ

N

d1 l1 l2Availability

mm inch mm mm2.000 38.00 12.002.100 38.00 12.002.200 40.00 13.002.300 40.00 13.002.380 43.00 14.002.400 43.00 14.002.500 43.00 14.002.600 43.00 14.002.700 46.00 16.002.780 46.00 16.002.800 46.00 16.002.900 46.00 16.003.000 46.00 16.003.100 49.00 18.003.170 49.00 18.003.200 49.00 18.003.300 49.00 18.003.400 52.00 20.003.500 52.00 20.003.570 52.00 20.003.600 52.00 20.003.700 52.00 20.003.800 55.00 22.003.900 55.00 22.003.970 55.00 22.004.000 55.00 22.004.100 55.00 22.004.200 55.00 22.004.300 58.00 24.004.370 58.00 24.004.400 58.00 24.004.500 58.00 24.004.600 58.00 24.004.700 58.00 24.004.760 62.00 26.004.800 62.00 26.004.900 62.00 26.005.000 62.00 26.005.200 62.00 26.005.500 66.00 28.005.800 66.00 28.006.000 66.00 28.006.350 70.00 31.006.500 70.00 31.006.800 74.00 34.007.000 74.00 34.007.140 74.00 34.007.500 74.00 34.007.940 79.00 37.008.000 79.00 37.008.500 79.00 37.008.730 84.00 40.008.800 84.00 40.009.000 84.00 40.00

31

F

l1

d1

l2

7/16


bright FIRE

89235

Solid carbide

155

DZ

N


mm inch mm mm9.500 84.00 40.0010.000 89.00 43.0010.200 89.00 43.0010.500 89.00 43.0011.000 95.00 47.0011.110 95.00 47.0011.500 95.00 47.0011.910 102.00 51.0012.000 102.00 51.00

32

F

l1

d 1

l2

F

3/64

1/16

5/64

3/32

7/64

1/8

9/64

5/32

11/64

89253

Solid carbide

102

DZ

N


mm inch mm mm1.000 26.00 6.001.100 28.00 7.001.190 30.00 8.001.200 30.00 8.001.300 30.00 8.001.400 32.00 9.001.500 32.00 9.001.590 34.00 10.001.600 34.00 10.001.700 34.00 10.001.800 36.00 11.001.850 36.00 11.001.900 36.00 11.001.980 38.00 12.002.000 38.00 12.002.060 38.00 12.002.100 38.00 12.002.200 40.00 13.002.250 40.00 13.002.300 40.00 13.002.380 43.00 14.002.400 43.00 14.002.500 43.00 14.002.530 43.00 14.002.600 43.00 14.002.700 46.00 16.002.780 46.00 16.002.800 46.00 16.002.900 46.00 16.002.950 46.00 16.003.000 46.00 16.003.050 49.00 18.003.100 49.00 18.003.170 49.00 18.003.200 49.00 18.003.300 49.00 18.003.400 52.00 20.003.450 52.00 20.003.500 52.00 20.003.570 52.00 20.003.600 52.00 20.003.700 52.00 20.003.800 55.00 22.003.900 55.00 22.003.970 55.00 22.004.000 55.00 22.004.040 55.00 22.004.100 55.00 22.004.200 55.00 22.004.300 58.00 24.004.370 58.00 24.004.400 58.00 24.004.500 58.00 24.004.570 58.00 24.00


bright FIRE

33

F

l1

d 1

l2

F

3/16

13/64

7/32

15/64

1/4

9/32

19/64

5/16

21/64

89253

Solid carbide

102

DZ

N


mm inch mm mm4.600 58.00 24.004.700 58.00 24.004.760 62.00 26.004.800 62.00 26.004.900 62.00 26.004.980 62.00 26.005.000 62.00 26.005.060 62.00 26.005.100 62.00 26.005.160 62.00 26.005.200 62.00 26.005.300 62.00 26.005.400 66.00 28.005.500 66.00 28.005.560 66.00 28.005.600 66.00 28.005.700 66.00 28.005.800 66.00 28.005.900 66.00 28.005.950 66.00 28.006.000 66.00 28.006.040 70.00 31.006.100 70.00 31.006.150 70.00 31.006.200 70.00 31.006.250 70.00 31.006.300 70.00 31.006.350 70.00 31.006.400 70.00 31.006.500 70.00 31.006.600 70.00 31.006.700 70.00 31.006.800 74.00 34.006.900 74.00 34.007.000 74.00 34.007.030 74.00 34.007.100 74.00 34.007.140 74.00 34.007.200 74.00 34.007.300 74.00 34.007.400 74.00 34.007.500 74.00 34.007.540 79.00 37.007.600 79.00 37.007.800 79.00 37.007.900 79.00 37.007.940 79.00 37.008.000 79.00 37.008.030 79.00 37.008.100 79.00 37.008.200 79.00 37.008.300 79.00 37.008.330 79.00 37.008.400 79.00 37.00


bright FIRE

34

F

l1

d 1

l2

F

11/32

23/64

3/8

25/64

13/32

27/64

7/16

29/64 15/32

31/64 1/2

9/16

89253

Solid carbide

102

DZ

N


mm inch mm mm8.50 79.00 37.008.60 84.00 40.008.70 84.00 40.008.73 84.00 40.008.80 84.00 40.008.90 84.00 40.009.00 84.00 40.009.13 84.00 40.009.30 84.00 40.009.50 84.00 40.009.52 89.00 43.009.60 89.00 43.009.70 89.00 43.009.80 89.00 43.009.92 89.00 43.0010.00 89.00 43.0010.08 89.00 43.0010.20 89.00 43.0010.32 89.00 43.0010.50 89.00 43.0010.72 95.00 47.0011.00 95.00 47.0011.11 95.00 47.0011.50 95.00 47.0011.51 95.00 47.0011.91 102.00 51.0012.00 102.00 51.0012.30 102.00 51.0012.70 102.00 51.0013.00 102.00 51.0013.50 107.00 54.0014.00 107.00 54.0014.29 111.00 56.0014.50 111.00 56.0015.00 111.00 56.0016.00 115.00 58.00


bright FIRE

35

F

l1

d1

l2

3/32

7/64

1/8

9/64

5/32

11/64

3/16

13/64

7/3215/64

1/4

9/32

5/16

11/32

Jobber drills without internal coolant, 5 x D

bright FIRE

89244

Solid carbide

155

DZ

N


mm inch mm mm2.000 49.00 24.002.100 49.00 24.002.200 53.00 27.002.300 53.00 27.002.380 57.00 30.002.400 57.00 30.002.500 57.00 30.002.600 57.00 30.002.700 61.00 33.002.780 61.00 33.002.800 61.00 33.002.900 61.00 33.003.000 61.00 33.003.100 65.00 36.003.170 65.00 36.003.200 65.00 36.003.300 65.00 36.003.400 70.00 39.003.500 70.00 39.003.570 70.00 39.003.600 70.00 39.003.700 70.00 39.003.800 75.00 43.003.900 75.00 43.003.970 75.00 43.004.000 75.00 43.004.100 75.00 43.004.200 75.00 43.004.300 80.00 47.004.370 80.00 47.004.400 80.00 47.004.500 80.00 47.004.600 80.00 47.004.700 80.00 47.004.760 86.00 52.004.800 86.00 52.004.900 86.00 52.005.000 86.00 52.005.160 86.00 52.005.500 93.00 57.005.560 93.00 57.005.950 93.00 57.006.000 93.00 57.006.350 101.00 63.006.500 101.00 63.006.800 109.00 69.007.000 109.00 69.007.140 109.00 69.007.500 109.00 69.007.940 117.00 75.008.000 117.00 75.008.500 117.00 75.008.730 125.00 81.009.000 125.00 81.00

36

F

l1

d1

l2

7/16


bright FIRE

89244

Solid carbide

155

DZ

N


mm inch mm mm9.500 125.00 81.0010.000 133.00 87.0010.200 133.00 87.0010.500 133.00 87.0011.000 142.00 94.0011.110 142.00 94.0011.500 142.00 94.0011.910 151.00 101.0012.000 151.00 101.00

37

F

l1

d 1

l2

F

3/64

1/16

5/64

3/32

7/64

1/8

9/64

5/32

11/64


bright FIRE

89261

Solid carbide

102

DZ

N


mm inch mm mm1.00 34.00 12.001.10 36.00 14.001.19 38.00 16.001.20 38.00 16.001.30 38.00 16.001.40 40.00 18.001.50 40.00 18.001.59 43.00 20.001.60 43.00 20.001.70 43.00 20.001.78 46.00 22.001.80 46.00 22.001.85 46.00 22.001.90 46.00 22.001.98 49.00 24.002.00 49.00 24.002.06 49.00 24.002.10 49.00 24.002.20 53.00 27.002.30 53.00 27.002.38 57.00 30.002.40 57.00 30.002.50 57.00 30.002.53 57.00 30.002.60 57.00 30.002.70 61.00 33.002.78 61.00 33.002.80 61.00 33.002.90 61.00 33.002.95 61.00 33.003.00 61.00 33.003.05 65.00 36.003.10 65.00 36.003.17 65.00 36.003.20 65.00 36.003.30 65.00 36.003.40 70.00 39.003.45 70.00 39.003.50 70.00 39.003.57 70.00 39.003.60 70.00 39.003.70 70.00 39.003.80 75.00 43.003.90 75.00 43.003.97 75.00 43.004.00 75.00 43.004.04 75.00 43.004.10 75.00 43.004.20 75.00 43.004.30 80.00 47.004.37 80.00 47.004.40 80.00 47.004.50 80.00 47.004.60 80.00 47.00

38

F

l1

d 1

l2

F

7/16


bright FIRE

89261

Solid carbide

102

DZ

N


mm inch mm mm4.70 80.00 47.004.76 3/16 86.00 52.004.80 86.00 52.004.85 86.00 52.004.90 86.00 52.005.00 86.00 52.005.06 86.00 52.005.10 86.00 52.005.16 13/64 86.00 52.005.20 86.00 52.005.30 86.00 52.005.40 93.00 57.005.50 93.00 57.005.56 7/32 93.00 57.005.60 93.00 57.005.70 93.00 57.005.80 93.00 57.005.90 93.00 57.005.95 15/64 93.00 57.006.00 93.00 57.006.10 101.00 63.006.20 101.00 63.006.30 101.00 63.006.35 1/4 101.00 63.006.40 101.00 63.006.50 101.00 63.006.60 101.00 63.006.70 101.00 63.006.75 17/64 109.00 69.006.80 109.00 69.006.90 109.00 69.007.00 109.00 69.007.10 109.00 69.007.14 9/32 109.00 69.007.30 109.00 69.007.40 109.00 69.007.50 109.00 69.007.54 19/64 117.00 75.007.60 117.00 75.007.80 117.00 75.007.90 117.00 75.007.94 5/16 117.00 75.008.00 117.00 75.008.03 117.00 75.008.10 117.00 75.008.20 117.00 75.008.33 21/64 117.00 75.008.40 117.00 75.008.50 117.00 75.008.60 125.00 81.008.70 125.00 81.008.73 11/32 125.00 81.009.00 125.00 81.009.10 125.00 81.00

39

F

l1

d 1

l2

F

23/64

3/8

25/64

13/32

27/64

7/16

89261

Solid Carbide

102

DZ

N


mm inch mm mm9.13 125.00 81.009.20 125.00 81.009.50 125.00 81.009.52 133.00 87.009.60 133.00 87.009.80 133.00 87.009.92 133.00 87.0010.00 133.00 87.0010.20 133.00 87.0010.30 133.00 87.0010.32 133.00 87.0010.50 133.00 87.0010.72 142.00 94.0011.00 142.00 94.0011.11 142.00 94.0011.50 142.00 94.0012.00 151.00 101.00


bright FIRE

40

1 2 3 4 5 6 7 8 9

15 290 4

80 4

80 4

70 4

15 1

15 1

200 7

200 7

150 6

120 6

180 5

80 5*

180 5*180 5*120 5120 570 450 350 440 3

80 3

104 591 5104 6

91 5

104 591 578 578 5

104 678 5

65 5

65 4

32 332 2

20 1

32 2

26 4

20 2117 5

104 5

91 5

104 5

15 115 1260 8

260 8

195 7

156 7

234 6

104 6

234 6

234 6

156 6

156 6

91 565 465 552 4

104 4

F

≤500≤1000≤850≤1000≤700≤850≤1000≤1000≤1400≤850≤1000≤1400≤1000≤1400≤850≤1400≤1400

≤350 HB≤900≤1100≤1500

≤48 HRC≤66 HRC

≤2000≤240 HB ≤350 HB ≤240 HB≤350 HB≤350 HB

≤850 ≤1400≤400≤650≤600≤600≤400≤500≤600≤600≤600 ≤850≤850≤1000≤150≤100 ≤1000≤1000

89235 89253

F

vc

m/minvc

m/min

Application recommendations for solid carbide twist drills

with coolant ducts

bright

FIRE-coated

UF Ultra fine grain

* Cutting lip corrected to appr. 10°

Coolantsoluble oiloilair

Tools with bold feed column no. are preferred choice.

General hints: For safety reasons it is very important, that a drill doesnot exceed a speed of n = 6 000 rev./min when not supported.The centrifugal forces could break these long tools beforereaching the workpiece surface!

Pilot holes are always necessary for drilling depths

over 7xD-, 10xD- and 12xD:

1.) The pilot hole can be produced with a short, rigid drill. The diameter should be 0.01 - 0.02 mm larger than the diameter of the Ratio drill. Drilling depth ≥ 1 x D.

2.) Alternatively, the Ratio Drills can produce their own pilot hole. Cutting speed and feed rate must therefore be reduced by 30-40%.

A coolant pressure of 40 bar is recommended.

Material group Material examples, new description (old description in brackets)Figures in bold = material no. to DIN EN

Tensile str. Hard-MPa (N/mm2) ness

Cool-ant

Common structural steels 1.0035 S185(St33),1.0486 P275N(StE285),1.0345 P235GH(H1),1.0425 P265GH(H2)1.0050 E295 (St50-2), 1.0070 E360 (St70-2), 1.8937 P500NH (WStE500)

Free-cutting steels 1.0718 11SMnPb30 (9SMnPb28), 1.0736 11SMn37 (9SMn36)1.0727 46S20 (45S20), 1.0728 (60S20), 1.0757 46SPb20 (45SPb20)

Unalloyed heat-treatable steels 1.0402 C22, 1.1178 C30E (Ck30)1.0503 C45, 1.1191 C45E (Ck45)1.0601 C60, 1.1221 C60E (Ck60)

Alloyed heat-treatable steels 1.5131 50MnSi4, 1.7003 38Cr2, 1.7030 28Cr41.5710 36NiCr6, 1.7035 41Cr4, 1.7225 42CrMo4

Unalloyed case hardened steels 1.0301 (C10), 1.1121 C10E (Ck10)Alloyed case hardened steels 1.7043 38Cr4

1.5752 15NiCr13 (15NiCr13), 1.7131 16MnCr5, 1.7264 20CrMo5Nitriding steels 1.8504 34CrAl6

1.8519 31CrMoV9, 1.8550 34CrAlNi7Tool steels 1.1750 C75W, 1.2067 102Cr6, 1.2307 29CrMoV9

1.2080 X210Cr12, 1.2083 X42Cr13, 1.2419 105WCr6, 1.2767 X45NiCrMo4High speed steels 1.3243 S 6-5-2-5, 1.3343 S 6-5-2, 1.3344 S 6-5-3Spring steels 1.5026 55Si7, 1.7176 55Cr3, 1.8159 51CrV4 (51CrV4)Stainless steels, sulphured 1.4005 X12CrS13, 1.4104 X14CrMoS17, 1.4105 X6CrMoS17, 1.4305

austenitic 1.4301 X5CrNi18-10 (V2A), 1.4541 X6CrNiTi18-10, 1.4571 X6CrNiMoTi martensitic 1.4057 X20CrNi 17 2 (X17CrNi16-2), 1.4122 X39CrMo17-1, 1.4521 X2CrMoTi18-2Hardened steels –

Special alloys Nimonic, Inconel, Monel, HastelloyCast iron 0.6010 EN-GJL-100(GG10), 0.6020 EN-GJL-200(GG20)

0.6025 EN-GJL-250(GG25), 0.6035 EN-GJL-350(GG35)Spheroidal graphite iron and 0.7050 EN-GJS-500-7(GGG50), 0.8035 EN-GJMW-350-4(GTW35)malleable cast iron 0.7070 EN-GJS-700-2(GGG70), 0.8170 EN-GJMB-700-2(GTS70)Chilled cast iron –Ti and Ti-alloys 3.7024 Ti99,5, 3.7114 TiAl5Sn2,5, 3.7124 TiCu2

3.7154 TiAl6Zr5, 3.7165 TiAl6V4, 3.7184 TiAl4Mo4Sn2,5, - TiAl8Mo1V1Aluminium and Al-alloys 3.0255 Al99,5, 3.2315 AlMgSi1, 3.3515 AlMg1Al wrought alloys 3.0615 AlMgSiPb, 3.1325 AlCuMg1, 3.3245 AlMg3Si, 3.4365 AlZnMgCu1,5Al cast alloys ≤ 10 % Si 3.2131 G-AlSi5Cu1, 3.2153 G-AlSi7Cu3, 3.2573 G-AlSi9 > 10 % Si 3.2581 G-AlSi12, 3.2583 G-AlSi12Cu, - G-AlSi12CuNiMgMagnesium alloys 3.5200 MgMn2, 3.5812.05 G-MgAl8Zn1, 3.5612.05 G-MgAl6Zn1Copper, low-alloyed 2.0070 SE-Cu, 2.1020 CuSn6, 2.1096 G-CuSn5ZnPbBrass, short-chipping 2.0380 CuZn39Pb2, 2.0401 CuZn39Pb3, 2.0410 CuZn43Pb2 long-chipping 2.0250 CuZn20, 2.0280 CuZn33, 2.0332 CuZn37Pb0,5Bronze, short-chipping 2.1090 CuSn7ZnPb, 2.1170 CuPb5Sn5, 2.1176 CuPb10Sn

2.0790 CuNi18Zn19PbBronze, long-chipping 2.0916 CuAl5, 2.0960 CuAl9Mn, 2.1050 CuSn10

2.0980 CuAl11Ni, 2.1247 CuBe2Duroplastics Bakelit, Resopal, Pertinax, MoltoprenThermoplastics Plexiglass, Hostalen, Novodur, MakralonKevlar KevlarGlass, carbon concent. plastics GFK/CFK

Feed column nos.drill dia.

mmf (mm/rev.)

0,004 0,006 0,007 0,008 0,010 0,012 0,014 0,016 0,0190,006 0,008 0,012 0,014 0,016 0,018 0,020 0,023 0,0250,020 0,025 0,032 0,040 0,050 0,063 0,080 0,100 0,1250,025 0,032 0,040 0,050 0,063 0,080 0,100 0,125 0,1600,032 0,040 0,050 0,063 0,080 0,100 0,125 0,160 0,1600,040 0,050 0,063 0,080 0,100 0,125 0,160 0,200 0,2000,040 0,050 0,063 0,080 0,100 0,125 0,160 0,200 0,2500,050 0,063 0,080 0,100 0,125 0,160 0,200 0,250 0,3150,063 0,080 0,100 0,125 0,160 0,200 0,250 0,315 0,3150,080 0,100 0,125 0,160 0,200 0,250 0,315 0,400 0,4000,080 0,100 0,125 0,160 0,200 0,250 0,315 0,400 0,5000,100 0,125 0,160 0,200 0,250 0,315 0,400 0,500 0,6300,125 0,160 0,200 0,250 0,315 0,400 0,500 0,630 0,6300,160 0,200 0,250 0,315 0,400 0,500 0,630 0,800 0,8000,160 0,200 0,250 0,315 0,400 0,500 0,630 0,800 1,0000,200 0,250 0,315 0,400 0,500 0,630 0,800 1,000 1,2500,250 0,310 0,400 0,500 0,630 0,800 1,000 1,250 1,2500,315 0,400 0,500 0,630 0,800 1,000 1,250 1,600 1,6000,400 0,500 0,630 0,800 1,000 1,250 1,600 1,600 2,000

0,50

1,00

2,00

2,50

3,15

4,00

5,00

6,30

8,00

10,00

12,50

16,00

20,00

25,00

31,50

40,00

50,00

63,00

80,00

DIN 6537

DIN 6539

Hartner std.Art

icle

no. Form HA, plain shank

Form HE, whistle notch

≤3xD drilling depth

Tool material

Carbide gradeCarbide description

Surface finishType

Coolant ducts

Sol. carb. Sol. carb.

K10/K20Carbide

N-

K10/K20Carbide

N-

Feed column

no.

Feed column

no.

41

130 7

110 6

145 8

110 7

120 7

110 7

105 7

105 7

100 6

130 8

120 7

85 5

100 690 565 655 5

45 355 445 445 345 325 225 4

210 8

155 8

155 7

125 7

35 3

40 435 3

260 9

260 9

220 8

180 8

260 8

105 7270 8180 7

105 6

85 6

80 5

60 5

145 7

120 6

170 8

145 8

130 8

125 7

120 7

120 7

105 7

145 8

120 7

85 5

110 7105 580 665 560 460 360 555 545 555 335 235 4210 9

160 9

140 9

130 8

40 3

45 440 3310 9

310 9

260 9

220 9

280 8

125 7325 8220 7

125 7

105 6

90 6

80 6

15 290 4

80 4

80 470 4

15 1

15 1

200 7

200 7

150 6

120 6

180 5*

80 5*180 5*180 5*120 5120 570 450 350 440 3

80 3

100 590 5100 6

90 4

100 590 580 580 5

100 680 5

65 5

65 3

30 330 2

20 1

30 2

20 2

20 2115 5

100 5

90 580 5

15 1

15 1

260 8

260 8

195 7

155 7

235 6

100 6

235 6235 6155 6155 690 565 450 565 4

100 4

145 7

120 6

170 8

145 8

130 8

125 7

120 7

120 7

105 7

145 8

120 7

85 5

105 7100 570 655 560 560 360 555 550 555 335 235 4

195 9

160 9

140 9

130 8

40 345 440 3

310 9

310 9

260 9

220 9

280 8

125 7325 8220 7

125 7

105 6

90 6

80 6

130 7

110 6

145 8

110 7

120 7

110 7

105 7

105 7

100 6

130 8

120 7

85 5

100 690 565 655 5

45 355 445 445 345 325 225 4

210 8

155 8

145 7

125 7

35 3

40 435 3

260 9

260 9

235 9

170 8

260 8

105 7270 8

180 7

105 6

85 6

80 5

60 5

100 6

80 6

80 6

70 6

180 7

160 7

150 7

120 6

180 6

180 6

6

120 5

170 7

145 7

130 7

125 6

120 6

120 6

105 6

145 7

120 6

85 4

110 6105 480 565 460 460 260 455 445 455 235 135 3195 8

160 8

140 8

130 7

40 240 340 2310 8

310 8

260 8

220 8

280 7

125 6325 7220 6125 6

105 5

90 5

80 5

120 6100 690 680 640 1

410 8410 8380 8

330 8

280 7

110 680 5

90 6

80 5

100 7

90 7

90 7

80 6

80 6

80 6

60 6

90 7

80 6

60 4

60 6

50 4

50 5

40 4

35 4

35 2

40 4

40 4

40 4

120 8

120 8

90 8

80 7

150 8

150 8

150 8

120 8

150 7

80 6

120 7

120 6

40 6

40 5

89247

89402

89413

F

8941789415

89414

F

89410

F

89261

F

8929389244

89408

89411

F

89418

F

89416

89412

F

vc

m/minvc

m/minvc

m/minvc

m/minvc

m/minvc

m/minvc

m/minvc

m/minvc

m/minvc

m/min

K/PCarbide-UF Carbide-UF Carbide-UF Carbide-UF Carbide-UF Carbide-UF Carbide-UF Carbide-UF

TS 100 U

Sol. carb. Sol. carb. Sol. carb. Sol. carb. Sol. carb. Sol. carb. Sol. carb. Sol. carb. Sol. carb. Sol. carb.

K/P

TS 100 U-

K10/K20Carbide

N-

≤5xDdrilling depth

K10/K20Carbide

N-

K/P

TS 100 U

K/P

TS 100 U-

K

TS 3 G-

K/P

TS 100 U

K

TS 150 GG

K/P

TS 100 U

≤7xD ≤10xD ≤12xD

Feed column

no.

Feed column

no.

Feed column

no.

Feed column

no.

Feed column

no.

Feed column

no.

Feed column

no.

Feed column

no.

Feed column

no.

Feed column

no.

42

Notes

43

Notes


FU500 | FN500UNIVERSELL & WIRTSCHAFTLICH

DE

16MnCr5

11SMn30+C

Sz37

GG

GGG

C45

VA

Aluminium

Kupfer

Bronze

Messing

Plexiglas

PVC

Makrolon

PE 1000


KLEINSTBOHRERAUS HSS-E-PM UND VOLLHARTMETALL

DE


TS-DRILLSVHM VORZUGSPROGRAMM

DE

Highlights

VHM-Werkzeuge für dieHochleistungsbearbeitung

2012

Präzisions-Bohrwerkzeuge

Gewindewerkzeuge

Das neue Komplettprogramm zur universellen Gewindeherstellung

2014

Präzisionswerkzeuge

NEU

VHM-Entgrat-werkzeugefür Ein- und Austritt

Neu: VHM Vor-/Rückwärts-entgrater TS 100 VR

2010

Präzisions-Bohrwerkzeuge

TF 100 MULTI-MILL

2014

NEU

Eintauchen mit bis zu 45°

Rampen, Bohren, Nuten,

Schruppen und Schlichten

Fräsen mit extremem

Zeitspanvolumen

Bohren ohne Pilotieren

bis 2xD möglich

Tiefl ochbohrer

Komplettprogramm

2014 Preisliste 42


Hochleistungs-

Fräswerkzeuge

aus VHM

Vorzugsprogramm

2013

Präzisions-Werkzeuge

NEU

VHM-Fasfräser

mit Spitzenwinkel60°, 90° und 120°

2014


NEU


MULTIPLEXWECHSELPLATTEN-BOHRSYSTEM MIT INNENKÜHLUNG

DE


MULTIPLEX HPCDAS WECHSELPLATTEN-BOHRSYSTEM

FÜR BOHRUNGEN BIS 10 X D

BIS DURCHMESSER 40,0 MM

DE


Präzisionswerkzeuge TM Werkzeug-

Ausgabesysteme

Individuelle Lösungen zur effi zienten Lagerung und Verwaltung von Werkzeugen

2013

www.hartner.de No

liabi

lity

can

be a

ccep

ted

for

prin

ting

erro

rs o

r te

chni

cal c

hang

es o

f any

kin

d.

Our

Con

ditio

ns o

f Sal

e an

d Te

rms

of P

aym

ent a

pply

. Ava

ilabl

e on

requ

est.

Hartner GmbH

P.O. Box 10 04 27, D-72425 AlbstadtTel. +49 74 31/1 25-0, Fax +49 74 31/1 25-21 547

Our programme:

FU 500/FN500

INOX Drills

Micro Precision Drills

TS-Drills

Highlights

Gun Drills

Solid Carbide High Performance Milling Cutters

Chamfering Milling Cutters

Multiplex

Multiplex HPC

Standard Range

TM Vending Machines

Threading Tools

De-burring Tools

TF 100 Multi-Mill

106

476/

1610

-VI-

05

Prin

ted

in G

erm

any

2016

hartner ts-drills en druckdaten 240816

Documents