Titan Division | Perforating Systems

H-1 P

erforating

Gun S

ystem®

Plug-and-Play, Select Fire

Perforating Gun

CCL Bottom Sub(0257-200-014)

Quick-Change Assembly(3271-312-030)

Cablehead Assembly(3916-022-035)

Fish Neck Assembly(3918-000-000)

CCL Assembly(0257-500-011)

Hunting’s flagship, premium plug-and-play perforating gun eliminates all user wire connections and tandem sub maintenance. H-1 features ControlFire Cartridge technology, simplifying the arming process and H-Lok shaped charges, which load four times faster than conventional charges.

H-1® Perforating System

MechanicalOutside Diameter (O.D.)

2-3/4” 3-1/8”

Nominal O.D. (in)[mm] 2.75 [70] 3.13 [79]

Nominal Thickness (in)[mm] 0.31 [8.0] 0.31 [7.9]

Typical Gun Swell (in)[mm] Ambient Liquid Conditions

4/0° 2.94 [75] 3.33 [85]

6/60° 2.95 [75] 3.28 [83]

Min. I.D. Running Restriction (in)[mm] 3.05 [77] 3.58 [91]

Drift Gauge O.D. for Gun Body I.D. (in)[mm] using Gauge Length 12in [305]

2.07 [53] 2.44 [62]

Min. Washover Pipe Clearance: Casing Drift I.D. to Nominal Washover O.D.

Washover Drift I.D. to Nominal Gun O.D.

0.38 [10]0.31 [8]

Min. Detonating Cord Velocity (ft/s)[m/s]

4/0° 21,000 [6,400] 21,000 [6,400]

6/60° 22,000 [6,700] 22,000 [6,700]

Upper & Lower Head Connection 2-3/8”-6 Stub Acme 2-3/4”-6 Stub Acme

Max. Tension (lbf) [kN] 135,000 [601] 170,000 [756]

Environmental 2-3/4” 3-1/8”

Pressure Rating (psi)[MPa]4/0° 19,000 [131] 16,500 [114]

6/60° 23,000 [159] 20,000 [138]

Temperature Rating (°F)[°C] 350 [177]

Electrical

Firing Capability ControlFire®

Maximum Voltage Rating Forward - 550V / 15 sec | Reverse - 550V / 30 sec

Maximum Firing Current Forward (Nominal) - 1A / 12 sec | Forward (Maximum) - 1.5A - 5 sec

Specifications

Benefits

■ 99.999% ControlFire switch reliability

■ Simple assembly, no wire connections necessary

■ Improved efficiency when loading

Features

■ Utilizes industry proven ControlFire® Cartridge

■ Uses easy load H-Lok™ shaped charges

■ Reduced number of connections

■ Reduced length and weight of gun string

H-1 Perforating Gun Assembly(H1W-312-SHA-A010-06060)

Plug Shoot Assembly(HTS-312-PSA-020)

Top Sub Assembly(HTS-312-TOP-020)

H-1® Perforating Gun System

Shot Density

Phase Shots Part NumbersMake-up Length

(in)[mm]Shot Spacing

(in)[mm]Shot Length

(in)[mm]Weight Unloaded

(lb)[kg]

4 SPF 0°

2 H1W-312*-SHA-A002-04000 18.00 [457]

3.00 [76]

3.00 [76] 21 [10]

4 H1W-312*-SHA-A010-04000 24.00 [610] 9.00 [229] 25 [11]

8 H1W-312*-SHA-A020-04000 36.00 [914] 21.00 [533] 34 [15]

12 H1W-312*-SHA-A030-04000 48.00 [1219] 33.00 [838] 44 [20]

6 SPF 60°

6 H1W-312*-SHA-A010-06060 24.00 [610]

2.00 [51]

10.00 [254] 24 [11]

9 H1W-312*-SHA-A013-06060 30.00 [762] 16.00 [406] 29 [13]

12 H1W-312*-SHA-A020-06060 36.00 [914] 22.00 [559] 34 [15]

18 H1W-312*-SHA-A030-06060 48.00 [1219] 34.00 [864] 44 [20]

21 H1W-312*-SHA-A033-06060 54.00 [1372] 40.00 [1016] 49 [22]

6 SPF 90°

4 H1W-312*-SHA-A004-06090 20.00 [508]

2.00 [51]

6.00 [152] 21 [9.5]

8 H1W-312*-SHA-A012-06090 28.00 [711] 14.00 [356] 28 [13]

12 H1W-312*-SHA-A020-06090 36.00 [914] 22.00 [559] 34 [15]

6 SPF 120° 3 H1W-312*-SHA-A003-06120 18.00 [457] 2.00 [51] 2.00 [51] 19 [9]

6 SPF 180°2 H1W-312*-SHA-A002-06180 16.00 [406]

2.00 [51]2.00 [51] 16 [7]

4 H1W-312*-SHA-A004-06180 20.00 [508] 6.00 [152] 21 [10]* Refers to Outside Diameter. 312 (3-1/8” O.D.) can be replace with 275 for 2-3/4” O.D. part numbers. Refer to H1 manual for specifications on 2-3/4” H-1 assemblies.

H-1® Perforating Guns

Hardware

DescriptionOutside Diameter (O.D.) | Part Number

2-3/4” 3-1/8”

CCL Bottom Sub 0268-000-014 0257-200-014

Quick-Change (QC) Assembly 3271-275-030 3271-312-030

Contact Kit; Quick-Change Assembly 3271-275-032

Top Sub Assembly HTS-275-TOP-020 HTS-312-TOP-020

Contact Kit; -020 Top Sub Assembly HTS-TOP-022

Top Sub, 1-5/8” 6 Acme HTS-275-TOP-140 HTS-312-TOP-140

Top Sub, 1-5/8” 6 Acme w/ Lock Collar HTS-275-TOP-130 HTS-312-TOP-130

Contact Kit; Top Sub Assembly HTS-TOP-022

Plug Shoot Assembly (PSA); #10 Style HTS-275-PSA-010 HTS-312-PSA-010

Plug Shoot Assembly (PSA); #20 Style - HTS-312-PSA-020

T-Set One Setting Tool TSET-ONE-000

Adapter; #10 Style PSA to 3-1/2” Shorty WST-5321-132

Adapter; #10 Style PSA to 3-5/8” Compact WST-3625-132

Adapter; #20 Style PSA to 3-5/8” Compact - WST-3625-133

Adapter; H-1 QC to Standard QC Box 3271-275-130 3271-312-130

Adapter; H-1 to Standard Gun Box HTS-275-HW-362B HTS-312-HW-363B

Lock Collar Top Sub Assembly(for 0° phase guns)

- HTS-312-TOP-120

H-1 Bottom Sub HTS-275-HW-003

ControlFire® Shooting Power Supply* 9002-013-810-1

VeriFire® Panel 9002-013-210

CFC Installation Tool HTS-UCP-100

T-Set One® Setting Tool Assembly(TSET-ONE-000)

Gun O.D.(in)[mm]

H-Lok Part NumberChargeClass

Exp. Type

Weight (g)

Tested Gun O.D. (in)[mm]

Shot Density(spf)[spm] | Phase

Entry Hole(in)[mm]

Penetration(in)[cm]

3-1/8 [79]

EXP-3323-471T-H1 EQF HMX 23.0 3-1/8 [79] 6 [20] | 60° 0.40 [10.16] 24.75 [62.87]

EXP-3321-372T-H1 EQF RDX 21.0 3-1/8 [79] 6 [20] | 60° 0.32 [8.13] 34.30 [87.12]

EXP-3319-423T-H1 SDP HMX 19.0 3-1/8 [79] 6 [20] | 60° 0.38 [9.65] 45.89 [116.56]

EXP-3319-302-H1 DP RDX 19.0 3-3/8 [86] 6 [20] | 60° 0.41 [10.41] 22.04 [55.98]

EXP-3319-331-H1 GH RDX 19.0 3-1/8 [79] 6 [20] | 60° 0.55 [13.97] 29.18 [74.12]

EXP-3321-421T-H1 SDP HMX 21.0 3-1/8 [79] 6 [20] | 60° 0.42 [10.67] 44.19 [112.24]

EXP-3321-431-H1 GH HMX 21.0 3-1/8 [79] 6 [20] | 60° 0.56 [14.22] 29.23 [74.24]

EXP-3323-401T-H1 DP HMX 22.7 3-1/8 [79] 6 [20] | 60° 0.43 [10.92] 23.54 [59.79]

EXP-3323-423T-H1 SDP HMX 22.7 3-3/8 [86] 6 [20] | 60° 0.45 [11.43] 42.21 [107.21]

EXP-3323-461T-H1 SDP HMX 22.7 3-3/8 [86] 6 [20] | 60° 0.36 [9.14] 35.63 [90.50]

EXP-3323-302-H1 DP RDX 22.0 3-3/8 [86] 6 [20] | 60° 0.44 [11.18] 21.25 [53.98]

EXP-3323-431-H1 GH HMX 22.7 3-3/8 [86] 6 [20] | 60° 0.59 [14.99] 29.42 [74.73]

FLO-3323-310B-H1 BH RDX 22.0 3-3/8 [86] 6 [20] | 60° 0.70 [17.78] 6.18 [15.70]

FLO-3323-311CF-H1 BH RDX 22.0 3-1/8 [79] 6 [20] | 60° 0.68 [17.27] 7.10 [18.03]

Gun O.D.(in)[mm]

H-Lok Part NumberChargeClass

Exp. Type

Weight (g)

Tested Gun O.D. (in)[mm]

Shot Density(spf)[spm] | Phase

Entry Hole(in)[mm]

Penetration(in)[cm]

2-3/4 [70]

RTG-2512-421T-H1 SDP HMX 12.0 2-3/4 [70] 6 [20] | 60° 0.36 [9.14] 31.90 [81.03]

RTG-2512-371T-H1 EQF RDX 12.0 2.75 [70] 6 [20] | 60° 0.30 [7.62] 24.00 [60.96]

EXP-2716-421T-H1 SDP HMX 16.0 2-3/4 [70] 6 [20] | 60° 0.38 [9.65] 35.94 [91.29]

EXP-2818-421T-H1 SDP HMX 18.0 2-3/4 [70] 6 [20] | 60° 0.41 [10.41] 36.22 [92.00]

EXP-2716-371T-H1 EQF RDX 16.0 2-3/4 [70] 6 [20] | 60° 0.32 [8.13] 25.79 [65.51]

EXP-2716-372T-H1 EQF RDX 16.0 2-3/4 [70] 6 [20] | 60° 0.34 [8.64] 26.80 [68.07]

FLO-2715-310B-H1 BH RDX 15.0 2-3/4 [70] 6 [20] | 60° 0.72 [18.29] 4.67 [11.86]

2-3/4 Inch Compatible Charges

3-1/8 Inch Compatible Charges

Description Part Number

ControlFire® Initiation Cartridge DETO-SBC-A140F-T V1.8

Plug Shoot Assembly Cartridge HTS-PSC-000

Bi-Directional Booster; HMX BOOSTER-HMX-600-T

Detonating Cord 80 grain (RDX LS) CORD-80RDX-LS-DT

Detonating Cord 80 grain (RDX LS XHV) CORD-80RDX-LS-XHV-DT

Expendable Items

ControlFire® Cartridge

Note: Part numbers shown are for 3-1/8” assembly. Use Viton (V95) if temperature is over 325°F [163°C]

ID Part Numbers Description Qty

1 H1W-312-SHA-A010-06060 H-1 Gun Assembly 6/60° 1

2 Compatible Charge H-LOK Charge Options 6

3CORD-80RDX-LS-DT Detonating Cord 80 grain (RDX LS) 1

CORD-80RDX-LS-XHV-DT Detonating Cord 80 grain (RDX LS XHV) 1

4 BOOSTER-HMX-600-W Bi-Directional Booster; HMX 1

5 DETO-SBC-A140F-T V1.8 ControlFire® Initiation Cartridge 1

REF HTS-PSC-0000 Plug Shoot Assembly Cartridge 1

OR1 0111-230-090 O-Ring; Viton 2

OR2 0111-332-070 O-Ring; 070 REF

OR3 0111-121-V95 O-Ring; Viton REF

Assembly Components

Easy arming and assemblyFast loading

Hunting’s mission is to innovate and manufacture quality oil/gas extraction equipment and distribute it across our global supply chain.

Hunting’s energetics division produces the greatest number of shaped charges in the world.

Hunting’s instrument division produces the most widely used addressable switch in the world.

Products and Services

Proprietary Technology

Hunting develops innovative technology that improves the way oil and gas are extracted, with a full range of applications below the wellhead including mud motors, premium connections, well perforating, logging and intervention tools.

Geographic Footprint

Manufacturing and distribution locations are strategically located in the key energy producing regions of the world.

Further Information Global Headquarters

Hunting Energy Services Inc.16825 Northchase Drive, Suite 600Houston, Texas 77060-3236 USA

T. +1 281 442 7382

Webwww.hunting-intl.com

Emailsales.titan@hunting-intl.comsupport.titan@hunting-intl.com

© Huntingv_2020.05.01