gwr nano insulation

GWR NANO INSULATION

INNOVATIVE INSULATION TECHNOLOGY

About Q Green Trading & Contracting Sustainable Energy solutions, being the main recent goals for most of The World Governments, is also Q Green’s

main objective. Our goal is to collaborate in providing green and sustainable energy able to replace the current

energy systems polluting and poisoning our planet.

Here comes Q Green idea to be a leading firm within The State Of Qatar to contribute with Qatar vision 2030 by

launching innovative products within the local market being unprecedented and used for the first time in our

Area, trying to induce big change and amelioration for our environment.

These products will be widespread to cover the Gulf and Middle East region soon. Due to extensive polluted

atmosphere all around, we started our campaign by introducing materials and systems having quick impact

results for several fields, out of which we cite the following:

Patented Wind Energy Turbine having a very low wind speed start up compared to available wind turbines,

which makes it very efficient mainly in our Area and could contribute very quickly with energy production

thus minimizing the use of current energy plants.

Organic and Bioproducts used as soil conditioner and leaf fertilizer giving natural restoration for soil life and

giving extra nutritional values for our products; Add to that the increase in yield and quality along with

reduction of manpower and machinery usage and mainly reduction for irrigation water volume.

Nano Thermal Insulation, using NANO technology to replace the thick and complex thermal insulation

current systems with a very thin Layer of sprayed Nano Ceramic System giving better insulation results with less

application cost and long terms durability; Thus reducing the energy used for cooling and Air conditioning by

25 to 30%.

FN NANO photocatalytic system for internal and external air purification using Nano technology with Titanium

Dioxide efficient to prevent viruses, bacteria, clean polluted air from toxins, removing odors, stopping molds

and fungus, water purification and much more.

About Q Green Trading & Contracting Above cited products, being frequently used and efficiently proven and certified in Europe, were recently

Launched in The State Of Qatar, where some have been used in ongoing Projects after being tested locally,

showing high efficiency compared to conventional systems already used since decades.

Our strategy to make the use of these products a standard to allow our Children and future generation have the

chance to live in a better green environment and clean purified atmosphere.

Q GREEN MANAGEMENT

Q GREEN CERTIFICATES

ISO 9001:2015

ISO 14001:2015

ISO 45001:2018

GULF GREEN MARK (GGM)

ABOUT GWR NANO INSULATION

Introduction

GWR Nano Insulation is heat insulation material of liquid consistency, colorable, applicable like paint, which has many other beneficial properties beside the insulation.

it is perfectly suitable for industrial, commercial and communal uses.

In sum, it can be said that compared to the conventional insulating materials GWR Nano Insulation offers a better alternative to its users thereby that its construction is much simpler, faster and more cost-effective than its traditional predecessors.

The type of GWR Nano Insulation

The color of the material is basically white, its consistency is liquid; it resembles a paint of dense consistency the most, but, of course, it cannot be considered as simple paint by any means.

The origin of GWR Nano Insulation

The LCHI insulating material were originally developed for space research and military purposes during the 70s and 80s, and they were used in these segments before it got out to the public markets.

COMPOSITION OF GWR NANO INSULATION

Ceramic balls with vacuum

Plastic balls filled with gas

Solid plastic balls

plastic balls are fed to the mixture

GWR NANO HEAT REFLECTION

Heat reflection is 60-70%

The high-degree heat reflection capacity of GWR Nano Insulation is owing to the ceramic balls with vacuum. The distribution of these balls, as well as the binding material and the additive (filling material) significantly reduce the heat conductive capacity of GWR Nano Insulation compared to the materials of same density.

Generally, it can be said that GWR Nano Insulation can be applied with the following heat insulation efficiency:

1 x 0,5 mm layer 30-35%-os efficiency



Heat Flow

ESSENTIAL FEATURES OF GWR NANO INSULATION

Heat Reflection: Minimum 60-70% heat reflection, which reduces the heat costs by at least 30%.

Noise Insulation: It reduces the noise level in a 0.6mm level by 2 dB.

Environment-Friendly: Its composition does not contain harmful- or poisonous components.

Watertight and Anti-corrosive: It protects the coated surface against the weather conditions and corrosion.

Working Temperature: The coat preserves tis properties under extreme conditions. Its working operation range from minus 60°C to 260°C.

Durable: Its service life is more than 30 years; with 20 years’ implementer guarantee.

ESSENTIAL FEATURES OF GWR NANO INSULATION

Heat Insulation: With one side coating, the quality of the incoming cold air is reduced at least 30%, with both side coating at least 55%.

Water Insulation: 78% water absorption, and the high vapor permeability, is great for the inside comfort feeling.

Incombustible: It does not feed combustion, helps to slow down the velocity of the flame.

Simple and Fast: With an airless sprayer either 60-100m2 can be coated per hour, depends on how many doors and windows are there. Repairs can be resolved by painting.

Colourable: It can be colored with any acryl-based paints.

Cost-Effective: No auxiliary materials are needed for the application; the application has low labour and time requirements.

TÜV SÜD OKTAGON CERTIFICATION

Standards and technical documentation:

• DIN EN ISO 4624 Pull-off test for adhesion (2003)

• DIN EN ISO 62 Determination of water absorption (1999)

• DIN 4102 B2 Reaction to fire tests - Ignitability of building products (1998) and DIN EN 13501-1 Reaction to fire classification of construction products and types (2010)

• DIN EN ISO 6272-1 Paints and varnishes - Rapid-deformation (impact resistance)tests - Part 1: Falling-weight test (2004)

• DIN EN ISO 2811 Paints and varnishes - Determination of density - Part 1: Pycnometer method (2006)

• DIN EN ISO 11358 Plastics - Thermogravimetry (TG) of polymers - Part 1: General principles (2014)

• DIN EN ISO 527 Determination of tensile properties (2012)

Standards and technical documentation:

• DIN 53160 Determination of the colourfastness of articles for common use - Test with artificial saliva (2001)

• DIN EN ISO 7783:2019-02 Paints and varnishes - Determination of water-vapour transmission properties - Cup method

• DIN EN 1062:2004 Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 1: Classification; German version EN 1062-1:2004

• ÉMI - TÜV SÜD OKTAGON Budapest, 2016.08.02 ID: R-804152

• ISO 16000 - 6:2004 standard

• 25/2000. (IX. 30.) EüM-SzCsM joint regulation

• MSZ EN ISO 3251 :2009

• MSZ EN ISO 14680 2:2006

• TÜV - SÜD Nr.: 12 90307 001

• TÜV - SÜD Nr.: MUC - KSP - A 1037 --- 2020 December

The heat transfer factor „U” value, based on TÜV SÜD Oktagon comparisons

Nr.: MUC - KSP - A 1037 „0,22 W/m2K” in 2 x 0,5 mm layers.

Performance according to declaration:Basic properties Efficiency Standards

Mechanical resistance Shock resistance: 2 Nm

Tensile strength: 0,135 MPa

Strain: 7,4 %

Module-E: 17 MPa

DIN EN ISO 6272

DIN EN ISO 527

DIN EN ISO 527

DIN EN ISO 527

Fire safety

Reaction to fire

Class E and B2

Euro Class A1

DIN EN 13501-1

EN ISO 11925-2

BS EN 13238:2010

Hygiene, health and environment protection It is not harmful to health TÜV SÜD R-04152

Safe use It is not harmful to health TÜV SÜD - R-04152

Heat transfer factor (U value) 0,22 W/ m2K (in 2x0,5mm layers.) TÜV SÜD - MUC - KSP - A 1037

Density 0,553 g/cm3 DIN EN ISO 2811

Viscosity 1225 MPas DIN EN ISO 2884-2

Vapor transmission 78 % - vapor permeable, Sd: 0,2 DIN EN ISO 62

DIN EN ISO 7783:2019-02

DIN EN 1062:2004

Adhesion strength 0,2 - 0,8 MPa DIN EN ISO 4624

AREA OF APPLICATION

The walls of dwelling houses and industrial buildings (both external and internal

covers)

The roof structures of dwelling houses and industrial buildings (both external and

internal covers)

Metal structures

Hangars and garages

The supporting structure of valve batteries

Piers of bridges (it reduces the danger of frost)

Distant heating pipelines

Steam and gas pipelines

Air-conditioning systems

Cold water pipelines, water reservoirs, water heaters and boilers

AREA OF APPLICATION

Heat exchangers

Steam boilers

Mineral oil lines (in an underground- and over ground construction)

Dwelling- and transport containers

Hot chemical mixing tanks

Water- and different chemical storing cisterns and tanks

Cold stores, refrigerating plants

Internal structural units, engine compartment, roof structure of the means of transport

The frame structure of military devices and equipment for other special intended uses

Public road and railway tanks for the transport of different liquids

The engine-house, deck and other structural units of ships

Tunnels

Building materials

METHOD OF APPLICATION

For the application, an airless sprayer is used,

by means of which we can work fast and

precisely, by distributing the layers evenly on

the surface

2 spray heads can be connected to one

machine at the same time, so either 2

persons can work with one sprayer, which

reduces the number of the working hours

further on, thereby reducing the costs.

Depending on the project, two persons can

cover 40-80 m2 surface per hour with one

sprayer.

AIRLESS SPRAYERS V/S BRUSHES

It can be seen on the surface formed by painting/plastering (the picture

on the right) that the covering layer contains more filling material, which

may impair the efficiency of GWR Nano Insulation, and the quantity of the material use also increases on the surface.

Layer painted with brushLayer painted with airless sprayer

APPLICATION OF GWR NANO INSULATION

Its application is fast, simple and cost-effective

In contrary to the conventional insulating materials, no any auxiliary

material is needed during its application (priming layer(s), mesh, grid, glue, guide, etc.).

Conventional Insulation GWR NANO Insulation

AREA OF APPLICATION PHOTOS

AREA OF APPLICATION PHOTOS –

PROJECTS IN QATAR.

AL Thumama Stadium and Precinct Project

Client: Supreme Committee for Delivery & Legacy SC.

Project Management Co. PMC: Time Qatar

Supervision Consultant: AEB

Main Contractor: Al Jaber Engineering – Tekfen JV

Scope of Work: Delivery & Application of GWR Nano Insulation.

GWR Nano Insulation Applied on: Block walls, Concrete Walls and Slabs, Metal

Deck, Under Screed, Under Precast, Under Screed.


PROJECTS IN QATAR.

Main Works for Lusail Stadium.

Client: Supreme Committee for Delivery & Legacy SC.

Project Management Co. PMC: Time Qatar

Supervision Consultant: Louis Berger Consulting/WSP

Main Contractor: HBK-CRCC JV


GWR Nano Insulation Applied on: Block walls, RC, AAC, Drywalls, floors, ceilings

Metal Deck, Steel beams.


PROJECTS IN QATAR.

Supply & Application of GWR Nano Insulation @ Refurbishment Porta Cabins

at Al Shahaniya.

Client: Quanto Bello Qatar Ltd. QB

Main Contractor: Harinsa Global Contracting Company


GWR Nano Insulation Applied on: Porta Cabins – External Walls & Ceilings.


PROJECTS IN QATAR.

Supply & Application of GWR Nano Insulation @ Commercial Offices.

Client: Alvo Conceptual Events


GWR Nano Insulation Applied on: Offices Internal Walls & Ceilings.

AREA OF APPLICATION PHOTOS – PROJECTS IN QATAR.

Project: Al Thumama Stadium.

AREA OF APPLICATION PHOTOS – PROJECTS IN QATAR.Project: Main Works for Lusail Stadium.

AREA OF APPLICATION PHOTOS –PROJECTS IN QATAR.Portacabins Thermal Insulation

Client : Quanto Bello Qatar Ltd. QB

AREA OF APPLICATION PHOTOS –PROJECTS IN QATAR.Offices Internal walls and Ceilings Thermal Insulation Client : Alvo Conceptual Events

QUESTIONS?

THANK YOU…

Q GREEN TRADING AND CONTRACTING

Sustainable Engineering Solutions

P.O. Box: 30515, Doha –Qatar

Office No. 3, 12thFloor, Marina Twin Tower A, Lusail.

Tel.: (+974) 44515160

E-mail: [email protected]

gwr nano insulation

Documents