gp-ic-3000 - 12 volt (dc input)
TRANSCRIPT
gpelectric.com © 2021 Go Power! Doc: SPEC_GP-IC-3000_DOMGP
3-IN-1 INVERTER, CHARGER AND AUTOMATIC TRANSFER SWITCH (3000 WATT INVERTER)
GP-IC-3000 - 12 VOLT (DC INPUT)
The Go Power! 3000-watt Inverter Charger 3000 delivers top features and performance at an economical price. It is a 3-in-1 system that expertly combines an inverter, battery charger and automatic transfer switch into one powerful and lightweight unit. The GP-IC-3000 has a compact footprint that saves space and simplifies installation - there are fewer components and cables to install!
The two 50 amp legs set its performance apart from common 50 amp inverter chargers. The configuration allows users to make full use of a 100 amp shore power service (240V) by passing through up to 12,000 watts of power! It is also compatible with all 30 amp services.
The inverter charger also includes a battery temperature sensor helping extend battery life.
GP-IC-3000-12-PKG
PURE SINE WAVE
Part 15, Class B
CSA 22.2 #107.1
UL 458 UL 1741
INVERTER SPECIFICATIONS
Output Power (up to 40ºC) 3000W
Surge Power (100 milliseconds) 6000W
Surge Power (5 seconds) 4800W
Peak Output Current 52A
Continuous Output Current 25A
Output Voltage 115 VAC
Output Frequency 60 Hz ±0.1Hz
Output Waveform Pure Sine Wave
Efficiency (Peak) 90%
DC Input Voltage Range 9 - 17 VDC
Maximum Continuous DC Input Current 400 ADC
No Load Power ConsumptionNormal Mode:25W, Sleep Mode: <5W
AC ConnectionsSplit Phase In/Dual Out, Dual In/ Dual Out
CHARGER SPECIFICATIONS
Input Voltage Nominal 120 VAC
Input Voltage Range 80 - 140VAC
Input Current 15A
Input Power Factor Correction 0.97 typical
Optimal Efficiency > 85%
Charge Control 3 stage with manual equalize
Output Voltage 5 - 16VDC
Output Current 125 ADC
Change Temperature Compensation Remote Battery Sensor
TRANSFER RELAY SPECIFICATIONS
Transfer Time 16ms
Transfer Relay Rating 2 legs at 50A each (240V split-phase)
ADDITIONAL SPECIFICATIONS
Temperature-20˚C to 60˚C (Over 40˚C output derates)
Humidity 0 to 95% RH non condensing
Dimensions (L x W x H)
13.7” x 12.6” x 8.07” (14.9” with terminals)349 x 321 x 205 mm (378 mm with terminals)
Net Weight 38.71 lbs (17.6 kg)
Regulatory and Safety SpecificationsUL certified to 458 & 1741 (with Marine Supplement) and to CSA 22.2 No. 107.1-01 FCC Path 15, Class B
• 3000W pure sine wave inverter; 6000W surge (100 milliseconds)
• High inverter efficiency - >90%• 125A battery converter/charger, power factor corrected
(programmable)• Power Share feature helps with heavy power draws (single leg)• Automatic transfer switch, 2 legs at 50A each
(240VAC split-phase)• Built-in handles offers easier handling during installation• Industry standard protection features• Meets UL 458 with marine supplement• 3 year warranty
Specifications subject to change without notice.
FEATURES:
gpelectric.com © 2021 Go Power! Doc: SPEC_GP-IC-3000_DOMGP
Monitor and Control yourinverter charger.
The remote features a digital display and menu that offers simple operation, while providing detailed operational data about your inverter charger.
Model # GP-ICR-50
• Easy-to-read, 4 line digital display panel
• Change settings and modes of operation
• View real-time status of battery charging activity, inverter AC input and inverter status
• Monitor inverter/charger health and temperature
• 50 ft cable included
• 3 year warranty
FUSE AND CABLE KITS
INVERTER REMOTE
Go Power! DC installation kits include everything you need to properly connect your Go Power! inverter to the batteries safely. The kit includes 10’ large gauge battery cables, tie downs, lugs, and the appropriate inverter fuse (class T fuse) and mounting block.
12 VOLT Inverter Size
GP-DC-KIT 4 2000-2500 W
GP-DC-KIT 5 2600-3000 W
PROTECT yourself and your equipment.
*B/C = Battery Charging Review individual product specs for actual wattage requirements = Ideal for high voltage alternatorsi
Your inverter charger is rated in watts. Most of your electrical appliances also have a wattage rating. This value helps you select the right size of inverter. The chosen model of inverter should meet the largest load you wish to run.
The chart below estimates the wattage required to run a single appliance. To run multiple appliances simultaneously, choose an inverter that matches the wattage of the combined items.
150 - 300 W 400 - 1000 W 1100 - 3000 W
GP-SW150
GP-SW300
GP-ISW700
GP-ISW1000
GP-ISW1500
GP-ISW2000
GP-IC-3000
GP-ISW3000
*B/C
i
i
i
i
HOW TO DETERMINE WHAT SIZE OF INVERTER TO USE
(can surge to 6000 watts)