RAVTD

3000HP

8LINER

8060TWSR

WHEEL ALIGNMENTSYSTEM

min. power consumption

24 volt motor with low speed rotation =

WirelessWirelessWireless

Truck AlignersTruck AlignersTruck Aligners

MEGAPIXEL HIGH RESOLUTION CAMERAS

TOWER-FREE3D Alignment System

Monitor 22"

EASY DATA

EASY ALIGNMENT

3D ANIMATION 3D INFO

TD3000HP.B

PATENT PENDING

3DT® TARGET (Solid Vision Technology)

Exclusive 3D targets:- no need for run out compensation- extremely light- no electronic components inside- no maintenance required.

EXTREMELY FAST:NO COMPENSATIONREQUIRED

EXTREMELY FAST:NO COMPENSATIONREQUIRED

EASY VEHICLE SELECTION

TOP PRECISIONTARGET READINGTOP PRECISIONTARGET READING

The base of the sensor can be translated outward by 65 mm in case of extra large vehicles.

Keyboard with remote-control function.

2,5 lbs9 lbsCOMPACT AND SAFECOMPACT AND SAFE

Bluetooth transmission between measuring heads and control unit.

TOWER-FREETOWER-FREETOWER-FREE

ALIGNMENTREADING IN ALIGNMENTREADING IN 8”

Quick entering of vehicle by model or V.I.N. number. (VIN reader option)

NO ROLLING COMP. NEEDED

NO ROLLING COMP. NEEDED

NO ROLLING COMP. NEEDED

!!

Top productMade in Italy

Automotive Aligners

LED REPEATER

EASYUNDER VEHICLE READING

EASYUNDER VEHICLE READING

QC2R (Quick Control 2 Reverse) allows to quickly diagnose front axle angles: total toe and camber.After measurement the user will decide whether to carry on with alignment operation and vehicle adjustment.

Quick clamp to the lift.Pivoting support to avoid damage due to obstacles while lowering.

PATENT PENDING

FASTEST SETUP FASTEST SETUP

Pair of self-centering 3 point clamps, with tire grabber arms and ABS claws. Equipped with quick claws approach device.

3 POINT + FAST CLAMPS

480-760 mm(19”-36”)

8”-24”

LIFT LEVEL COMPENSATION

Can be used on any 4 post or scissors lift. Automatic lift level compensation.

OPTION

MOBILE AND SAFE

Guided adjustments, no need to see the monitor.

Camber/Caster

Toe

LED FRONT/REAR

Pair of self-centering 3 point clamps, with tire grabber arms and ABS claws. Equipped with quick claws approach device.

STDA35E 8”-24”

• 1 control unit with PC, monitor, key-board, printer

• 2 measuring heads• 4 clamps with target• 1 pair of turn tables• 1 brake pedal depressor• 1 steering wheel lock• Instruction manual on CD

STDA124 (2 x kit)

STANDARD

STDA117 (2 x kit)

Buil t in so f twareBuil t in so f twareBuil t in so f tware

QUICK BATTERY CHANGE

STDA141 - REMOTE CONTROL on SmartPhone / Tablet

BATTERY CHARGING STATION

STDA3D/QC QUICK CONTROL

Bluetooth transmission between front measuring heads and control unit. Equipped with TFT colour monitor.Infra-red transmission between measuring heads.Data Bluetooth transmission allows maximum mobility between different working positions, thanks to the absence of cables and any fix structure.

The paper-exit opening permits using the printer with the drawer closed, thereby providing total protection against damage and dirt.

SAFE PRINT

Drawer to store clamps and accessories.

The wheeled control unit houses computer, printer and monitor, allowing total mobility.

DRAWER

WHEELED CONTROL UNIT

Keyboard with remote-control function.

REMOTE CONTROL

8Sensors8Sensors8Sensors

Power supplied by long-life rechargeable batteries.

Infra-red data transmission particularly good even in difficult lighting conditions.

7 lbs

8-sensor technology with solid state electronic inclinometers wireless bluetooth

Windows based computer/software 19” flat screen

Cable battery-recharging system

Attractive new “limited edition” cabinet

Supports VIN scanning (scanner not included)

Supports new ALIGNER CONNECT

4-point clamps and turntab/es included

Brake pedal depressor and steering wheel lock

Pair of self-centering 4 point clamps, with removable claws.(Optional 3point fast clamps)

STDA33EU 10”-24”

S110A7 - Ø 310 mm (12.2”)(2x2200lbs) Turntables

8-LINER

OPTIONSTANDARD

Pair of 3 point clamps, with tire grabber arms and ABS claws.

STDA96 8”-24”

8”-24” (19”-36”)

3 point + Fast clamps4 point

10”-24”

8 CCD8 CCD8 CCD

STDA141 - REMOTE CONTROL on SmartPhone / Tablet

Top productMade in Italy

CAR ALIGNMENT ACCESSORIES

Pair of self-centering 4 point clamps, with removable claws.

STDA33EU 10”-24”

10”-24”

4 point

STDA408 x 33 mm (1.3”)

STDA33EU(standard)STDA35E-95E(option)Metal claws.

STDA41 - 8 x 55 mm (2.2”) STDA33EU-35E-95E-84E

(option)Long metal claws for vans.

STDA136 - 8 x kit STDA33EU

Run-Out Compensation RequiredSet of steel claws for low profile tyres.

Standard STDA40 compared to STDA136

STDA42 - 6 x 55 mm (2.2”) STDA33EU-35E-95E

(option)Extensions for metal claws for of protruding hubs.

METAL

ABS Plastic

Pair of 3 point clamps, with tire grabber armsand ABS claws.

STDA96 8”-24”

8”-24” (19”-36”)

Pair of self-centering 3 point clamps, with tire grabber arms and ABS claws. Equipped with quick claws approach device.

STDA35E 8”-24”

8”-24”

(19”-36”)

3 point + Fast clamps 3 point + Fast clamps

STDA38 Ø from(19”) to (30”)( STDA33EU)Pair grabbers arms for upgrade

STDA100 Ø from (27”) to (36”)STDA101 Ø from (34”) to (44”)( STDA35E-95E)Set of 4 clamping arms

STDA72 - 6 x extensions from 24” to 28”( STDA35E-95E)Extension kit for a pair of 3 point clamps.

STDA39 - 8 x kit STDA46EU-48E-35E-95E-84E

ABS conic claws for quick lock clamps.

STDA94 - 8 x kit STDA46EU-48E-35E-95E-84E

Low depth ABS claws.

STDA131 - 8 x kit STDA46EU-48E-35E-

95E-84EVolkswagen ABS claws.

STDA124 - Ø 360 mm (14.1”)(2x2200lbs) 3D Turnplates

S110A7 - Ø 310 mm (12.2”)(2x2200lbs) Turnplates

Turntables

STDA3D/QC(2 x kit)Quick control standard

S110A2 - 11” x 13” x 1,5”Pair of sliding plates for rear wheels.

Sliding plates

STDA16 - 43,5 x 20 x 2 mmSTDA17 - 59 x 20 x 2 mm

1100/1500500

50

Calibration

STDA133Calibration kit for VISTAR

STDA14Calibration kit for CCD

Standard

8-LinerStandard

8-LinerStandard

8-Liner

Standard

3D VistarStandard

3D VistarStandard

3D Vistar

TWSRTruck Aligners

New 4 led sensors allow alignment reading up to 18 meter.

4 LED SENSORSAbility to operate the system from any measuring head. Often the operator is far, from the console and this slows down the operating speed.

4 REMOTE CONTROLS

UNIVERSAL USEfloor, pit or lift

Faster and more reliable data transmission

through Bluetooth.

LEDS on the measuring head lets the operator know when adjustment angle is within specification range.

LED REPEATER

Significantly higher income production through superior efficiency

Much faster operating times without any loss of accuracy

Simpler system to learn, less training time involved.

Bluetooth transmission between front heads and cabinet

Infrared transmission between sensor heads

Double inclinometer to allow caster ADJUSTMENT without steering

We recommend the new no run out clamps STDA92 enabling to skip run-out compensation procedure

Suitable for car wheels with VARCOMBORAV

Truck AlignersTruck AlignersTruck Aligners

TD 8060 TWSR6CCD sensors - TFT 19”

Contacts for battery charging

QUICK CHARGE

6CCD6CCD6CCD

Top productMade in Italy

Truck Aligners

- 1 control unit complete with PC, monitor, key-board, printer and battery-charger

- 2 Front measuring heads

- 2 Rear measuring heads

- 1 Brake pedal presser

- 1 Steering clamp

STDA141 - REMOTE CONTROL on SmartPhone

FAST CLAMPSeliminates run-out compensation

Measurement of multiple axles vehicles thanks to an extremely easy-to-follow procedure.

User’s instructions by animated graphics for an immediate operation.

• Data management and display program in WINDOWS environment.

• Data bank with vehicle data sheets already entered and further blank sheets to be filled.

• Customer data bank for recording jobs with search by customer name or vehicle plate number.

• Summary and comparison of diagnosis/repair values on a single screen.

OPTION

MULTIPLE AXLERUN-OUT Fast Run-out of

multiple axel with only 2 positions STANDARD

NEWNEWNEW

STDA92Set of 2 non-runout quick adapters. By referencing the wheel center which is almost perfectly accurate, we can deliver a more accurate measurement without need to raise each axle or to roll the vehicle to perform run-out compensation.This improves accuracy while saving 15-20 minutes per truck.

S110A7 - Ø 310 mm (12.2”) 2x220 lbs

ACCESSORIES FOR CAR ( TD8080TWS - TD8060TWS)

(Truck) + Car

STDA33EU 10”-24”

COMBO*

VARCOMBORAV for RAVTD8060TWSR

Top productMade in Italy

INTERNATIONALRavaglioli  S.p.A.40037 Sasso MarconiFraz. Pontecchio M.P.O.B. 1690 - Bologna - Italia Tel. +39 - 051 - 6781511Fax +39 - 051 - 846349rav@ravaglioli.com www.ravaglioli.com

RAV Equipment U.S.A.+1.703.887.0095rav@ravaglioli.com

TRUCK ALIGNMENT ACCESSORIES

Technical data and composition presented in this catologue may vary. Pictures reproduced are only indicative.

Distributed by

Editi

on 0

03RAV Equipment U.S.A.

up

level

down

>700 mm (27,5”)

12”-28”

STDA30EPair of self-centering 4 point clamps with long removable claws. Moving centre crosspiece to adapt the position of the sensor to the vehicle body.

STDA48EPair of self-centering 4 point clamps, with tire grabber arms and metal removable conic claws.

STANDARD

STDA92Set of 2 non-runout quick adapters.

STDA44LGraduated scale for STDA29L

STDA29L - Ø 370 mm (14,5”)Set of 2 commercial turnplates.Capacity 2x10000 lbs (2x4500 kg)

12”-28”

>780-1220 mm(30”-48”)

> 890-1290 mm (35”-50”)

STDA49N Trailer adapters

Trailer

2560/3020

ADAPTER N° 2 (standard)

ADAPTER N° 1 (standard)

NEWNEWNEWIncludes: 2 additional light duty front heads and recharging cradle.It features double bluetooth calibration and double pairing to work with HD and LD vehicle

*Factory order